Hitachi Welding System L100 Users Manual Series Inverter Instruction

2015-01-24

• Cover
• Safety Messages
  • Definitions and Symbols
  • Hazardous High Voltage
  • General Precautions - Read These First!
  • Index to Warnings and Cautions in This Manual
    • Installation - Cautions for Mounting Procedures
    • Wiring - Warnings for Electrical Practices and Wire Specifications
    • Wiring - Cautions for Electrical Practices
    • Powerup Test Caution Messages
    • Warnings for Configuring Drive Parameters
    • Cautions for Configuring Drive Parameters
    • Warnings for Operations and Monitoring
    • Cautions for Operations and Monitoring
    • Warnings and Cautions for Troubleshooting and Maintenance
  • General Warnings and Cautions
  • UL® Cautions, Warnings, and Instructions
    • Wiring Warnings for Electrical Practices and Wire Sizes
    • Terminal Tightening Torque and Wire Size
    • Wire Connectors
    • Circuit Breaker and Fuse Sizes
    • Motor Overload Protection
• Table of Contents
  • Revisions
  • Contact Information
• Getting Started
  • Introduction
    • Main Features
    • Operator Interface Options
    • Inverter Specifications Label
    • Model Number Convention
  • L100 Inverter Specifications
    • Model-specific tables for 200V and 400V class inverters
    • General Specifications
    • Derating Curves
  • Introduction to Variable-Frequency Drives
    • The Purpose of Motor Speed Control for Industry
    • What is an Inverter?
    • Torque and Constant Volts/Hertz Operation
    • Inverter Input and Three-Phase Power
    • Inverter Output to the Motor
    • Intelligent Functions and Parameters
    • Braking
    • Velocity Profiles
  • Frequently Asked Questions
• Inverter Mounting and Installation
  • Orientation to Inverter Features
    • Unpacking and Inspection
    • Main Physical Features
  • Basic System Description
  • Step-by-Step Basic Installation
    • Choosing a Mounting Location
    • Ensure Adequate Ventilation
    • Keep Debris Out of Inverter Vents
    • Check Inverter Dimensions
    • Prepare for Wiring
    • Determining Wire and Fuse Sizes
    • Terminal Dimensions and Torque Specs
    • Wire the Inverter Input to a Supply
    • Wire the Inverter Output to Motor
    • Logic Control Wiring
    • Uncover the Inverter Vents
  • Powerup Test
    • Goals for the Powerup Test
    • Pre-test and Operational Precautions
    • Powering the Inverter
  • Using the Front Panel Keypad
    • Front Panel Introduction
    • Parameter Editing Controls
    • Keys, Modes, and Parameters
    • Keypad Navigational Map
    • Selecting Functions and Editing Parameters
    • Monitoring Parameters with the Display
    • Running the Motor
    • Powerup Test Observations and Summary
• Configuring Drive Parameters
  • Choosing a Programming Device
    • Introduction
    • Introduction to Inverter Programming
  • Using Keypad Devices
    • Inverter Front Panel Keypad
    • Key and Indicator Legend
    • Keypad Navigational Map
    • Operational Modes
    • Run Mode Edits
    • Control Algorithms
  • “D” Group: Monitoring Functions
    • Parameter Monitoring Functions
    • Trip Event and History Monitoring
  • “F” Group: Main Profile Parameters
  • “A” Group: Standard Functions
    • Basic Parameter Settings
    • Analog Input Settings
    • Multi-speed and Jog Frequency Setting
    • Torque Control Algorithms
    • DC Braking Settings
    • Frequency-related Functions
    • PID Control
    • Automatic Voltage Regulation (AVR) Function
    • Second Acceleration and Deceleration Functions
    • Accel/Decel
  • “B” Group: Fine Tuning Functions
    • Automatic Restart Mode
    • Electronic Thermal Overload Alarm Setting
    • Overload Restriction
    • Software Lock Mode
    • Miscellaneous Settings
  • “C” Group: Intelligent Terminal Functions
    • Input Terminal Configuration
    • Intelligent Input Terminal Overview
    • Output Terminal Configuration
    • Output Function Adjustment Parameters
• Operations and Monitoring
  • Introduction
    • Caution Messages for Operating Procedures
    • Warning Messages for Operating Procedures
  • Connecting to PLCs and Other Devices
  • Example Wiring Diagram
    • Specifications of Control and Logic Connections
    • Terminal Listing
  • Using Intelligent Input Terminals
    • Forward Run/Stop and Reverse Run/Stop Commands:
    • Multi-Speed Select
    • Jogging Command
    • Two-stage Acceleration and Deceleration
    • Free-run Stop
    • External Trip
    • Unattended Start Protection
    • Software Lock
    • Analog Input Current/Voltage Select
    • Reset Inverter
    • Thermistor Thermal Protection
  • Using Intelligent Output Terminals
    • Run Signal
    • Frequency Arrival Signals
    • Overload Advance Notice Signal
    • Output Deviation for PID Control
    • Alarm Signal
  • Analog Input Operation
  • Analog and Digital Monitor Output
    • PWM Signal Type
    • FM Signal Type
  • PID Loop Operation
  • Configuring the Inverter for Multiple Motors
    • Simultaneous Connections
• Inverter System Accessories
  • Introduction
  • Component Descriptions
    • AC Reactors, Input Side
    • AC Reactors, Output Side
    • Zero-phase Reactor (RF Noise Filter)
    • EMI Filter
    • RF Noise Filter (Capacitive)
    • DC Link Choke
  • Dynamic Braking
    • Introduction
    • Dynamic Braking Usage
    • Selecting Braking Resistors for External Braking Units
• Troubleshooting and Maintenance
  • Troubleshooting
    • Safety Messages
    • General Precautions and Notes
    • Inspection Items
    • Troubleshooting Tips
  • Monitoring Trip Events, History, & Conditions
    • Fault Detection and Clearing
    • Error Codes
    • Trip History and Inverter Status
  • Restoring Factory Default Settings
  • Maintenance and Inspection
    • Monthly and Yearly Inspection Chart
    • Megger Test
    • Spare parts
    • Capacitor Life Curve
    • General Inverter Electrical Measurements
    • Inverter Output Voltage Measurement Techniques
    • IGBT Test Method
  • Warranty
    • Warranty Terms
• Glossary and Bibliography
  • Glossary
  • Bibliography
• Drive Parameter Settings Tables
  • Introduction
  • Parameter Settings for Keypad Entry
    • Main Profile Parameters
    • Standard Functions
    • Fine Tuning Functions
    • Intelligent Terminal Functions
• CE-EMC Installation Guidelines
  • CE-EMC Installation Guidelines
  • Hitachi EMC Recommendations
• Index
  • A
  • B
  • C
  • D
  • E
  • F
  • G
  • H
  • I
  • J
  • K
  • L
  • M
  • N
  • O
  • P
  • R
  • S
  • T
  • U
  • V
  • W
  • Z