Hitron TECHNOLOGIES CGN21A 8x4 D3 WIRELESS ROUTER User Manual 0440010108N0 2A

Hitron TECHNOLOGIES 8x4 D3 WIRELESS ROUTER 0440010108N0 2A

Users Manual

RevNo Revision note SignatureDate1Checked65432654321ABCDABCDProject: Part Name: Part Number Description:Version Dwg No: Material: Coating:Date: Designed by Checked by Approve by-date2A2011/10/24CVE-30360,EN,Hitron,NCC/TWN100P ዂആિ297 mm420 mmYvonne LiuPoster 0440010108N0CVE-30360ԫშ๊࣐Щᕼϊ/፝୥Մშ८ዀұАωԹՔຏጤ࣐׸ጤ2/׸᠓ࡤԚ࠯Аω;259)X*y216)I*nn3/ᄨ᠓Рԓ፝୥Մშ2/3/4შ2შ3 შ44/؆፵;211Qዂആિ5/Ӡږ;༄Ҫᚗ८Ӡږ/ӠږᚠՔ፝୥Մᄃርኻࠣ-Ӡږϲৡ፝୥ྲߤӈ
QUICK START GUIDEHITRONWIRELESS VOIP CABLE ROUTERConnect to the InternetConnect your phonesSet up your wireless networkRead mefirst!1STEPCheck the package contents1 Router1 ETHERNET CABLE QUICK START GUIDE1 POWER ADAPTOR2STEPConnect the cable portConnect your cable outlet to the device’s CABLE connector.3STEPConnect the powerConnect the power adaptor to the POWER port.4STEPConnect your phones/fax machines (CVE Series only)Use the cables to connect your phones and fax machines to the LINE ports.Do this only if you ordered phone/fax service.5STEPConnect wired computers (optional)You can use the included Ethernet cable to connect a computer toone of the LAN orts.6STEPConnect wireless computers (optional)You can connect devices to the wireless network. Look at thesticker on the bottom of the device, and make a note of the SSIDand Wireless PassPhrase.Next, look at the LEDs (lights) on thefront of the device. Is the WirelessLED on, or blinking?If so, the wireless network is on.If not, turn the wireless network on bypressing the WIFI button on the sideof the device for at least 3 seconds.1~5sOn your computer, open your wireless network utility (this example usesWindows XP). Refresh the network list and locate your device’s SSID.Click Connect. The next screen shows that you are securely connected.Select the network. In the next screen, enter the Wireless PassPhrase.157mm (6.18inch)103 mm (4inch)Mounting Kits
Setup CompleteLED DisplayCongratulations! You have successfully set up your router. If you haveany problems, see the sections below for help identifying the problem.* Up to ten minutes on first connection, two minutes thereafter.POWER: this LED turns on when power is connected and the router is turned on. If it does not, your router is not receivingpower.UPSTREAM/DOWNSTREAM: these LEDs blink while the router issearching for a connection over the Internet, and shine steadily oncea connection is established. If they continue to blink for longer thanexpected*, the router cannot make a connection.LINE 1/LINE 2: (CVE Series only) these LEDs turn on if you have phone/fax services.If you ordered one phone line LINE 1 turns on, and if you ordered two lines, both LEDs turn on.IP addressesIf your router is successfully connected to the network (see LED display)but you cannot access the Internet from a connected computer, yourcomputer’s IP Address may be set up wrongly. In your computer’s controlpanel either ensure that the computer is configured to receive an IP addressautomatically (recommended) or ensure that it has a static IP address in therange 192.168.0.2~192.168.0.254. For more information, consult yourOperating System’s document.Configration interfaceYour router has a configuration interfaceallowing complete control over thedevice’s behavior. In a Web browser, enter192.168.0.1 in the address bar. In the screenthat displays, enter admin as the usernameand password as the password.Connection optionsPOWERCABLECOMPUTERSPHONES/FAXESWIRELESSDEVICESSTEPSafety Warnings WARNINGDISCLAIMERCOPYRIGHT © 2011 HITRON TECHNOLOGIES, INC.NotesWall-mounting lnstallationThe mounting holes seperated by 157mm/ 6.18inch on the bottom of device. You may drive two nails or screws with the head size in a diameter of 7.00mm/ 0.28inch and a thickness of 2.7mm/ 0.11inch into the wall to make sure of the nails or screws are capable of withstanding 2.5k load.You also can use the little pack with tapping screws and plastic anchors in box to mount this device on the wall. The steps of wall-mounted installation are(1) Drill two holes with diameters of 6.5mm/ 0.25inch, in distance of 157mm/ 6.18inch on the wall.(2) Nail the plastic anchors into the holes and make sure the whole anchors were inserted in the wall.(3) Screw the tapping screws in the anchors and expose the appropriate length at the screw head to hang the device.There are limitations if plastic anchors are used. The wall surface must be:1. Fir and pine with a thickness of over 32mm/ 1.25inch;timber or plywood that is capable of withstanding 2.5k load.2. Brick wall with a thickness of over 32mm/ 1.25inch.3. Concrete wall with a thickness of over 32mm/ 1.25inch4. Metal wall with a thickness of over 15mm/ 0.6inch157mm (6.18inch)103 mm (4inch)WallHole DrillingDiameter 6.50mm/ 0.25inchTapping screwPlasticanchorWallThe drilling orientation of the actual size isincluded in the box.Before drilling holes on the wall, you can place this orientationdiagram on the wall first and drill holes P/N:0440010108N0(2A)NCC Warning StatementArticle 12 Without permission, any company, firm or user shall not alter the frequency, increase the power, or change the characteristics and functions of the original design of the certified lower power frequency electric machinery. Article 14 The application of low power frequency electric machineries shall not affect the naviga-tion safety nor interfere a legal communication, if an interference is found, the service will be suspended until improvement is made and the interference no longer exists. The manufacturer assumes no liabilities with respect to the contents of this document. The manufacturer also reserves the right to revise this document or update the content thereof without any obligation to notify any person of such revisions or amendments. Specifications subject to change without notice.Risk of electrical shock. Do not expose the device to water or moisture. The device is a high-performance communications device designed for home and office environments. Do not use the device outdoors. Keep the device in an environment between 0°C ~ 40°C (32°F ~104°F). To avoid overheating, do NOT place any object on top of the device. Do not restrict the flow of air around the cable modem. The manufacturer assumes no liabilities for damage caused by any improper use of the device.
FCC statement in User’s Manual (for class B) “Federal Communications Commission (FCC) Statement This Equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. FCC Caution: 1. This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. 2. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. 3. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user authority to operate the equipment.

Navigation menu