Hitron TECHNOLOGIES CGN21A 8x4 D3 WIRELESS ROUTER User Manual 0440010108N0 2A

Download:
Mirror Download [FCC.gov]
Document ID	1599871
Application ID	M4i+d4vkqt7vYuyGg7Texw==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	316.7kB (3958799 bits)
Date Submitted	2011-12-09 00:00:00
Date Available	2011-12-09 00:00:00
Creation Date	2011-10-25 12:13:31
Producing Software	Acrobat Distiller 7.0.5 (Windows)
Document Lastmod	2011-12-08 10:55:24
Document Title	0440010108N0_2A
Document Creator	PScript5.dll Version 5.2
Document Author:	yvonne_liu

RevNo Revision note
Date
Signature Checked
297 mm
420 mm
შ2
შ3
შ4
2/‫׸‬᠓ࡤԚ࠯Аω;259)X*y216)I*nn
3/ᄨ᠓Рԓ፝୥Մშ2/3/4
4/؆፵;211Qዂആિ
5/Ӡ‫;ږ‬༄Ҫᚗ८Ӡ‫ږ‬/Ӡ‫ږ‬ᚠՔ፝୥Մᄃርኻࠣ-Ӡ‫ږ‬ϲৡ፝୥ྲߤӈ
ԫშ๊࣐Щᕼϊ/፝୥Մშ८ዀұАω
Project:
CVE-30360
ԹՔຏጤ࣐‫׸‬ጤ
Version
2A
Part Name:
Poster
Dwg No:
Date:
Designed by
2011/10/24
Yvonne Liu
Part Number
Description:
0440010108N0
CVE-30360,EN,Hitron,NCC/TWN
Material:
Coating:
100P ዂആિ
Checked by
Approve by-date
QUICK START GUIDE
HITRON
WIRELESS VOIP CABLE ROUTER
Check the package contents
Read me
first!
STEP
1 Router
1 POWER ADAPTOR
1 ETHERNET CABLE
QUICK START GUIDE
Connect to the Internet
103 mm (4inch)
Connect your phones
Set up your wireless network
157mm (6.18inch)
Mounting Kits
Connect the cable port
STEP
Connect the power
Connect your cable outlet to the device’s CABLE connector.
Connect your phones/fax machines (CVE Series only)
STEP
Use the cables to connect your phones and fax machines to the
LINE ports.
Do this only if you ordered phone/fax service.
Connect wireless computers (optional)
STEP
STEP
Connect the power adaptor to the POWER port.
Connect wired computers (optional)
STEP
You can use the included Ethernet cable to connect a computer to
one of the LAN orts.
On your computer, open your wireless network utility (this example uses
Windows XP). Refresh the network list and locate your device’s SSID.
You can connect devices to the wireless network. Look at the
sticker on the bottom of the device, and make a note of the SSID
and Wireless PassPhrase.
Select the network. In the next screen, enter the Wireless PassPhrase .
Next, look at the LEDs (lights) on the
front of the device. Is the Wireless
LED on, or blinking?
If so, the wireless network is on.
If not, turn the wireless network on by
pressing the WIFI button on the side
of the device for at least 3 seconds.
1~5s
Click Connect. The next screen shows that you are securely connected.
Setup Complete
IP addresses
If your router is successfully connected to the network (see LED display)
but you cannot access the Internet from a connected computer, your
computer’s IP Address may be set up wrongly. In your computer’s control
panel either ensure that the computer is configured to receive an IP address
automatically (recommended) or ensure that it has a static IP address in the
range 192.168.0.2~192.168.0.254. For more information, consult your
Operating System’s document.
Congratulations! You have successfully set up your router. If you have
any problems, see the sections below for help identifying the problem.
LED Display
POWER: this LED turns on when power is connected and the
router is turned on. If it does not, your router is not receiving
power.
Configration interface
UPSTREAM/DOWNSTREAM: these LEDs blink while the router is
searching for a connection over the Internet, and shine steadily once
a connection is established. If they continue to blink for longer than
expected*, the router cannot make a connection.
Your router has a configuration interface
allowing complete control over the
device’s behavior. In a Web browser, enter
192.168.0.1 in the address bar. In the screen
that displays, enter admin as the username
and password as the password.
LINE 1/LINE 2: (CVE Series only) these LEDs turn on if you have phone/
fax services.If you ordered one phone line LINE 1 turns on, and if you
ordered two lines, both LEDs turn on.
* Up to ten minutes on first connection, two minutes thereafter.
Safety Warnings
STEP
WIRELESS
DEVICES
DISCLAIMER
The manufacturer assumes no liabilities with respect to the contents of this document.
The manufacturer also reserves the right to revise this document or update the content
thereof without any obligation to notify any person of such revisions or amendments.
Specifications subject to change without notice.
POWER
PHONES/
FAXES
COMPUTERS
WARNING
Risk of electrical shock. Do not expose the device to water or moisture. The device is a
high-performance communications device designed for home and office environments.
Do not use the device outdoors. Keep the device in an environment between 0°C ~ 40°C
(32°F ~104°F). To avoid overheating, do NOT place any object on top of the device. Do
not restrict the flow of air around the cable modem. The manufacturer assumes no
liabilities for damage caused by any improper use of the device.
NCC Warning Statement
Article 12
Without permission, any company, firm or user shall not alter the frequency, increase the
power, or change the characteristics and functions of the original design of the certified
lower power frequency electric machinery.
Article 14
The application of low power frequency electric machineries shall not affect the navigation safety nor interfere a legal communication, if an interference is found, the service
will be suspended until improvement is made and the interference no longer exists.
CABLE
COPYRIGHT © 2011 HITRON TECHNOLOGIES, INC.
Connection options
Wall-mounting lnstallation
The mounting holes seperated by 157mm/ 6.18inch on the
bottom of device.You may drive two nails or screws with the
head size in a diameter of 7.00mm/ 0.28inch and a thickness
of 2.7mm/ 0.11inch into the wall to make sure of the nails or
screws are capable of withstanding 2.5k load.You also can
use the little pack with tapping screws and plastic anchors in
box to mount this device on the wall.The steps of wall-mounted
installation are
(1) Drill two holes with diameters of 6.5mm/ 0.25inch, in distance
of 157mm/ 6.18inch on the wall.
(2) Nail the plastic anchors into the holes and make sure the
whole anchors were inserted in the wall.
(3) Screw the tapping screws in the anchors and expose the
appropriate length at the screw head to hang the device.
There are limitations if plastic anchors are used. The wall
surface must be:
1. Fir and pine with a thickness of over 32mm/ 1.25inch;timber
or plywood that is capable of withstanding 2.5k load.
2. Brick wall with a thickness of over 32mm/ 1.25inch.
3. Concrete wall with a thickness of over 32mm/ 1.25inch
4. Metal wall with a thickness of over 15mm/ 0.6inch
The drilling orientation of the actual size is
included in the box.Before drilling holes
on the wall, you can place this orientation
diagram on the wall first and drill holes
103 mm (4inch)
Wall
Wall
Tapping screw
Plasti c anchor
Hole Drilling
Diameter 6.50mm/ 0.25inch
157mm (6.18inch)
Notes
P/N:0440010108N0(2A)
FCC statement in User’s Manual (for class B)
“Federal Communications Commission (FCC) Statement
This Equipment has been tested and found to comply with the limits for a class
B digital device, pursuant to Part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of
the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution:
1. This device complies with Part 15 of the FCC rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference
that may cause undesired operation.
2. This device and its antenna(s) must not be co-located or operating in
conjunction with any other antenna or transmitter.
3. Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user authority to operate the
equipment.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Page Count                      : 4
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:1ffd9410-d87a-48ab-97d4-d907ca15eaec
Producer                        : Acrobat Distiller 7.0.5 (Windows)
Create Date                     : 2011:10:25 12:13:31+08:00
Modify Date                     : 2011:12:08 10:55:24+08:00
Metadata Date                   : 2011:12:08 10:55:24+08:00
Creator Tool                    : PScript5.dll Version 5.2
Thumbnail Width                 : 256
Thumbnail Height                : 180
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 12303 bytes, use -b option to extract)
Document ID                     : uuid:F819817EBFFEE011AF6DDE33900E30E5
Instance ID                     : uuid:5e6d8e6c-0c87-40ac-ad59-e8b65832e947
Derived From Instance ID        : uuid:d6942c57-fa6b-48e1-9a16-eb6abdb0ba65
Derived From Document ID        : xmp.did:10956E32BEFEE011A3C5CD36AD003235
Derived From Rendition Class    : proof:pdf
N Pages                         : 1
Has Visible Transparency        : False
Has Visible Overprint           : False
Max Page Size W                 : 297.038717
Max Page Size H                 : 209.980120
Max Page Size Unit              : Millimeters
Font Name                       : ArialMT, Georgia, DFHei-W5-WIN-BF
Font Family                     : Arial, Georgia, 華康中黑體
Font Face                       : Regular, Regular, Regular
Font Type                       : Open Type, Open Type, TrueType
Font Version                    : Version 3.00, Version 2.12, Version 2.00
Font Composite                  : False, False, False
Font File Name                  : ARIAL.TTF, georgia.TTF, DFT_B5.TTC
Plate Names                     : Cyan, Magenta, Yellow, Black
Swatch Group Name               : 預設色票群組
Swatch Group Type               : 0
Format                          : application/pdf
Creator                         : yvonne_liu
Title                           : 0440010108N0_2A
Author                          : yvonne_liu

EXIF Metadata provided by EXIF.tools