Hitron TECHNOLOGIES CGNV21 Wireless Gateway EMTA User Manual

Hitron TECHNOLOGIES Wireless Gateway EMTA

User Manual

QUICK START GUIDEHITRON CGNV21Connect to the networkConnect your phones (Optional)Set up your wireless network (Optional)Read mefirst!1STEPCheck the box contentsLook in the box and make sure you have the following:2STEPConnect the cable portConnect your cable outlet to the device’s CABLE connector.3STEPConnect the powerConnect the power adaptor to the POWER port. 6STEPConnect wireless computers (optional)You can connect computers to the wireless network. Look at thesticker on the bottom of the device, and make a note of the SSIDand Wireless PassPhrase. 4STEPConnect your phones / fax machines (optional)Use the cables to connect your phones and fax machines to theLINE port. Do this only if you ordered phone/fax service. 5STEPConnect wired computers (optional)You can use the included Ethernet cable to connect a computer toone of the LAN ports. Next, look at the LEDs (lights) on the front of the device. Wireless LED on, or blinking? If so, the wireless network is on.If not, turn the wireless network on by pressing the WPS button on the side of the device for 1 second.Press the WPS button more than 5 secconds for WPS function.QUICK START GUIDEHITRON CGNV21ETHERNET CABLEPOWER ADAPTOROpen the wireless network connections from the taskbar and select the SSID that belongs to the CGNV21 then press "Connect".Another window will popup,input the Security Key (PassPhrase) assigned to the SSID you wish to connect then press Accept. Once connected, the SSID will be on the top of the list and marked as "Connected".

Navigation menu