Honda Lock Mfg HLIK-1T RKE Transmitter User Manual

Honda Lock Mfg. Co., Ltd. RKE Transmitter Users Manual

Users Manual

Download: Honda Lock Mfg HLIK-1T RKE Transmitter User Manual
Mirror Download [FCC.gov]Honda Lock Mfg HLIK-1T RKE Transmitter User Manual
Document ID656177
Application ID8r5/yah77G13ZoPG5GypTg==
Document DescriptionUsers Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize8.09kB (101169 bits)
Date Submitted2006-05-09 00:00:00
Date Available2006-08-07 00:00:00
Creation Date2006-03-28 01:20:02
Producing SoftwareAcrobat Distiller 5.0 (Windows)
Document Lastmod2006-04-04 19:33:51
Document TitleUsers Manual

06/03/20 16:43:07 32SDRT00_089
Remote Transmitter
4. Remove the old battery from the
back of the inner cover, and insert
a new battery into the back of the
cover with the + side facing down.
5. Install the parts in reverse order.
An improperly disposed battery
can hurt the environment.
Always confirm local regulations
for battery disposal.
Chinese Regulations for Controlling
Short Range Radio Equipment
Keyless Entry Function
Modulation Mode: FSK
Frequency Range: 313−314 MHz
Transmitting Power: ≦6000 V/m (3
m)
Occupied Bandwith: ≦300 kHz
Spurious Emission Limits: ≦600 V/m
(3 m)
The user shall not change the
transmission frequency, amplify the
output capacity by such means as
installing a transmission amplifier,
install another aerial, or replace the
original transmission aerial without
permission of the Authority.
The equipment shall not cause any
harmful interference with various
authorized radio communication. If
such interference is detected,
operation of the equipment shall be
suspended until a measure is taken to
remove such interference.
84
Instruments and Controls
When using radio equipment with
very small output capacity, the
equipment must accept any
interference caused by the emission
of various radio communication
equipment as well as industrial,
scientific and medical facilities.
Use of such radio equipment is
prohibited in an aeroplane and around
an airport.
05/05/26
17:19:24
31SNA600
0090
Remote Transmitter
BATTERY
TAB
3. Inside the transmitter, separate
the inner cover from the keypad
by releasing the two tabs on the
cover.
4. Remove the old battery from the
back of the inner cover, and note
the polarity. Make sure the
polarity of the new battery is the
same (+ side facing down), then
insert it into the back of the cover.
Instruments and Controls
As required by the FCC:
This device complies with Part 15 of the
FCC rules. Operation is subject to the
following two conditions: (1) This device
may not cause harmful interference, and
(2) this device must accept any
interference received, including
interference that may cause undesired
operation.
Changes or modifications not expressly
approved by the party responsible for
compliance could void the user’s
authority to operate the equipment.
This device complies with Industry
Canada Standard RSS-210.
Operation is subject to the following two
conditions: (1) this device may not cause
interference, and (2) this device must
accept any interference that may cause
undesired operation of the device.
5. Install the parts in reverse order.
87

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Create Date                     : 2006:03:28 01:20:02Z
Modify Date                     : 2006:04:04 19:33:51+09:00
Page Count                      : 3
Creation Date                   : 2006:03:28 01:20:02Z
Mod Date                        : 2006:04:04 19:33:51+09:00
Producer                        : Acrobat Distiller 5.0 (Windows)
Metadata Date                   : 2006:04:04 19:33:51+09:00
Has XFA                         : No
EXIF Metadata provided by EXIF.tools
FCC ID Filing: MLBHLIK-1T

Navigation menu