Honey Bee HB-1131 Vita Sound Personal Audio Enhancer User Manual PAE 200 Manual ENG V01 1B

Honey Bee (Hong Kong) Ltd. Vita Sound Personal Audio Enhancer PAE 200 Manual ENG V01 1B

user manual

EnglishVitaSound TV™PAE-200User ManualPersonal Audio Enhancer
Headset2PAE-200 TV Base unit Transmitter 5USB cable4AC/DC USB adaptor 5V 1A1PAE-200 TV handset7Headset case6Analog (RCA) AV cable 9Ear tips (large/regular/small)8Hanging Neck strapPAE-200 TV In the Box3
Introduction   1Safety and Operation Instruction   1PAE-200 Handset Identifying Parts   2PAE-200 Base Unit Indentifying Parts   3Getting Started   4Base Unit Installation and Operation   5-6Handset Charging   6PAE-200 Handset Operation  Power On   7  Adjust Volume   7  Select Volume Booster    7  Select EQ Sound Mode   8  Power Off   8Reset PAE-200 Handset   9Handset and Base Unit auto-connection   10Color Pairing   11FAQ   12-13Technical Specification   14Application   15Other Optional Accessories   16Certification and Compliance   17Contents
PAE-200 Handset Indentifying Parts1 2 365410798111  Headset port (connect to headset)2  Hook for neck strap3  Power button4  EQ mode button5  EQ mode indicator (1-4)6  Power indicator7  Volume level indicator8  Volume booster switch9  Volume adjust buttons10  Reset button11  Charging port for Base UnitFrontTopRightLeftBottom 2
PAE-200 Base Unit Indentifying PartsL ROPTICALCOAXIAL OPTICAL COAXIALDIGITAL AUDIO IN1412 13161718 191512  Power indicator13  Power button (transmitting)14  Charging dock for PAE Handset15  Analog (RCA) audio-in port16  Audio input mode switch (Optical/Coaxial)17  Optical audio-in port18  Coaxial audio-in port19  USB power adaptor port3
Getting Started41.  Connect the RCA audio cable from the Analog audio-in port       of the Base Unit to the RCA audio-out port of the TV box2.  Connect the USB power adaptor to the Base Unit power port3.  Put the Handset to the Base unit charging dock       for battery charging. It is recommended to charge 5 hours for the first use4.  After charging, put on the neck strap5.  Plug the headset to the headset port       on the Handset6.  Power on the TV and the TV box7.  Press the power button       to power on the Base Unit, power indicator       will be lit up in red color8.  Press the power button       to power on the Handset, the power indicator      will be flashing9.  When the Handset connects to the Base unit, the power indicator       will turn to solid green. TV sound will be played through the headset.10.  Press the volume button      to adjust the volume level. Press the      button for increasing the volume level and press the       button for lowering the volume level. Volume level indicator       will be lit to present the volume level.11.  Severely hearing-impaired persons can turn the volume booster switch       on and  increase the volume output level.    Except in special circumstances, please keep using the normal volume output12.  Press the EQ mode button      to select different preset compensated EQ modes. EQ indicator      will show which mode (1, 2, 3 & 4) has been selected.  EQ compensation for each person is different, select one of the modes according to the personal preferences.13.  Indicators      &      will be lit during any operation. The Handset will enter to sleep mode (to save power) if no more operation in process after 40 seconds. All indicators will be turned off automatically.14.  Press and hold the power button      will turn off the Handset. Power indicator      will be lit out. Press and hold the power button      will turn off the Base Unit. Power indicator      will be lit out15.  For detailed instructions, please refer to the following manual151914113 1236697455 63613128
Base Unit Installation and Operation5Installation of Base Unit to TVL ROPTICALCOAXIAL OPTICAL COAXIALDIGITAL AUDIO IN1.  Connect the Base Unit with one end of the analog (RCA) audio cable  Red connector to Red port, White connector to white port2.  Connect the other end of the analog (RCA) audio cable to the analog (RCA) audio-out port of the TV box  Red connector to Red port, White connector to white portAnalog (RCA) audio cable TV box HD TVOptical audio cable Analog (RCA) audio cableConnect the USB Power Adaptor1.  Connect the USB cable (USB type A end) with the USB power adaptor2.  Plug the adaptor into the wall outlet3.  Connect the other end (USB micro B) of the USB cable into the USB adaptor port on the Base UnitL ROPTICALCOAXIAL OPTICAL COAXIALDIGITAL AUDIO INBase unit – Optical and Coaxial portsBase Unit allows it to connect to other Smart TVs or advanced video/audio players through the Optical or Coaxial port. Optical and Coaxial cables are optional accessories. Please refer to the instruction manual in the box with the optional parts.OPTICAL COAXIALDIGITAL AUDIO IN
Base Unit Power ON/OFF and Indicator1.  Press the power button until the Red power indicator is ON2.  It is ready to connect to the Handset when the red light is ON3.  Press and hold the power button until the power indicator is OFF1.  Put the Handset into the Base Unit charging dock  No need to turn on the Base Unit and Handset during battery charging2.  The power indicator of the Handset will turn on during battery charging3.  When charging is completed, the indicator will be turned offCharging PAE Handset1 2 3This product must be used VitaSound supplied accessory or specified chargers to chargeComplete charging time:  approximately 4 to 5 hoursBattery operation time:    approximately 6 to 8 hoursThe Handset power button will be flashing in orange and a double Beep sound will be generated through the headset while battery power level is low.  61 2 3Press Press and Hold
In some cases, user can turn on the volume booster to increase the volume output  Normal output volume leve  Amplified output volume levelPower on the HandsetPress and hold the power button        until the Red power indicator is on and flashing. It will search and connect to the Base Unit automatically. The indicator will stop flashing and turn to green color when the Handset is paired to the Base Unit.Adjust Volume7Press and release       button to increase the volume level. Press and release the       button to lower the volume level. There are 8 volume levels to control and each adjustment is 4dB. Volume indicator will show the volume level while adjusting.Volume level indicatorVolume adjust buttonSelect Volume BoosterExcept under special circumstances, it is not recommended to turn on the volume booster Normal output volume level Amplified output volume levelPress and hold
To turn off the PAE Handset, press and hold the power button       until the power indicator is off.Select EQ Sound ModeThe PAE-200 is equipped with 4 different EQ sound modes. User can select the sound mode according to the personal preferencesEQ mode 1 : overall optimizedEQ mode 2 : Low frequency boostEQ mode 3 : Medium frequency boostEQ mode 4 : High frequency boost8EQ mode buttonEQ mode indicatorPower Off the HandsetThe corresponding indicator will be lit up after sound mode is selected.EQ mode cycle selection: Press the EQ mode button to switch the EQ mode once; from Mode 1 to Mode 2, from Mode 2 to Mode 3; from Mode 3 to Mode 4; from Mode 4 to Mode 1 and so on.  It is recommended that new users try each EQ mode for 1 minute to find the most personal suitable EQ mode.Press and holdTo save power, PAE will go to sleep mode if the device is not operated in 40 seconds. All EQ and volume LED indicators will be off.To wake up the PAE, press any button on the device will resume all indicators.          Any operation is only effective while the PAE is at wake up mode (indicators are on).Sleep & Wake up modes
To achieve the best sound performance, please use the headset provided by VitaSound. After uses, please unplug the headset from the PAE and put it into the headset case.Reset the PAE-200When the PAE-200 cannot be operated in any situation, press the rest button by a small pin object to reset the PAE-200 Handset.9Reset buttonHeadsetPairs of large, regular & small ear tips are also provided. User can choose the one to fit.Ear tipsOnly use the AC/DC USB power adaptor provided by VitaSound.The rating of the adaptor is shown on the back of the USB adaptor.AC/DC USB Power AdaptorAttempt other power adaptor not provided by VitaSound will cause safety problem
If two Base Units are installed within 5 meters, transmitting signal will be interfered. Power off either one of them according usage situation to prevent signal interference.Auto-connection between PAE-200 and Base UnitIf the Handset color of the PAE-200 TV and the “VitaSound” trademark color on the Base Unit Transmitter are the same, they will be connected automatically within a range of 10 meters. No pairing progress is required.1010 metersAuto-connection5 metersCannot recognize the connectionblue colorblue trademark
Color Pairing and ConnectionIf the Handset color of PAE-200 and the “VitaSound” trademark color on the Base Unit are not matched, the Handset and Base Unit will not be paired. Please be aware of the PAE-200 Handset color and the “VitaSound” trademark color of the Base Unit before use.11Blue colorBlue color Gray colorBlue color Gray colorGray color Blue colorGray colorGray colorBlue color
Symptom Possible Cause Possible Corrective Action PageFrequently Asked Questions The PAE-200 Handset is not workingAll indicators of the PAE-200 Handset turn off themselves, except the power indicator.Red LED of Power indicator of the PAE-200 Handset is flashingThe PAE-200 Handset is off.The PAE-200 Handset is out of batteryThe PAE-200 Handset is hang off.No sound is produced from the headset while the Red indicator of the PAE-200 Handset is solid on and the wireless connection is normal.Turn on the PAE-200 Handset.Charge the PAE-200 Handset immediately.Press the Rest Button with a small pin object to reset the PAE-200 Handset.The behavior is normal. The indicators will be off automatically for power saving when no operation is performed for 40 seconds.N/AThe volume level of the PAE-200 is too lowThe headset is not plugged into the PAE-200 Handset properly.No audio signal from the Base Unit or TV.Increase the PAE-200 Handset volume output level.Make sure the headset is firmly plugged into the PAE-200 Handset.Make sure the TV is turned on. (Please read your TV manual for detail)Make sure the volume of the TV is on. (Please read your TV manual for detail)Make sure the mute mode of your TV is not activated. (Please read your TV manual for detail)769667710The Handset battery is running low.The Base Unit is power off.The PAE-200 Handset exceeds 10 meters of the operation range from the Base unit.The PAE-200 Handset cannot connect to the Base Unit within the 10 meters operation range.Turn off the PAE-200 and start charging.Turn on the Base Unit.Make sure The PAE-200 Handset is in the operation range.Please contact VitaSound service.When using the analog (RCA) audio cable to connect the Base Unit and TV box, make sure the optical and coaxial cables are disconnected with the Base Unit and TV box.When using the analog (RCA) audio cable to connect the Base Unit and TV box, make sure the optical and coaxial cables are disconnected with the Base Unit and TV box.(Please read your TV box manual for detail)When using the optical cable to connect the Base Unit and TV box, make sure1) the optical cable is connected with the Base Unit and TV box properly2) the Audio input mode switch on the Base Unit is switched into “ Optical audio input”.55512
5When using the coaxial cable to connect the Base Unit and TV box, make sure1) the coaxial cable is connected with the Base Unit and TV box properly2) the Audio input mode switch on the Base Unit is switched into “ Coaxial audio input”.No sound is produced from the headset while the Red indicator of the PAE-200 Handset is solid on and the wireless connection is normal.No audio signal from the Base Unit or TVThe PAE-200 Handset and the Base Unit are out of the 10 meters operation range.The auto-connection dose NOT work when the PAE-200 Handset color and the “VitaSound” trademark color on the Base Unit are different.Auto-connection between the PAE-200 Handset and the Base Unit is not workingMake sure the PAE-200 is within a range of 10 meters from the Base Unit.Make sure the PAE-200 Handset color and the “VitaSound” trademark color on the Base Unit are the same before use. 111) Turn off one Base Unit is not in use, or2) Keep the distance between each Unit more than 5 metersSignal interference occursMore than 1 Base Unit are installed in 5 meters 1013Symptom Possible Cause Possible Corrective Action Page
 Technical specificationDimensions:  100.2mm x 60mm x 19.1mmWeight:  88 gramBattery:  Built-in rechargeable lithium-ion, 2000 mAhOperation time:  6 – 8 hours (fully charged)Charging time:  4 – 5 hoursHeadset Socket:  3.5mm stereo jack plugOutput signal frequency range:  200 – 16,000 HzEQ sound mode:  4 modesVolume control:  8 steps (4dB/step)Output power:  60 mW (16Ω load)Digital signal processing:  32 kHz sampling frequency  16 bit resolution in stereoRadio communication frequency:  2.4 GHz, ISM bandRadio communication range:  10m indoor, clear line or straightRadio communication characteristics: Automatic channel searching  Coexists with other radio transmitters operating on the 2.4GHz frequency bandTopology:  Point-to-pointAntenna Type:  Internal SMD antennaDimension:  101.5mm x 94.1mm x 40.1mmWieght:  97 gramPower:  5V 1A (5W)Audio source input:  Analog (RCA) Jack (Red/White)  Optical Jack 44.1kHz PCM / 48kHz PCM  Coaxial Jack 44.1kHz PCM / 48kHz PCMDigital radio transmission:  2.4 GHz, ISM band  Coexists with other radio transmitters operating on the 2.4GHz ISM bandRadio communication range:  10m indoor, clear line or straightRadio communication characteristics:   Automatic channel searchingRadio communication range:  10m indoor, clear line or straightTopology:  Point-to-pointTransmitter output:  8dBmWFor the digital (Optical or Coaxial) connection, the Base Unit dose NOT support Dolby Digital 2.1 / 5.1 / 7.1 audio coding.Operating temperature:      0 °C to 35 °C (32 °F to 95 °F)Relative humidity:    5 % to 95 %Complies with the following requirements:  CE, FCC, RoHS and C-TickPAE-200 TV Handset Base Unit TransmitterEnvironmental RequirementsRegulatory requirements14
 Base Unit TransmitterPAE-200HandsetChargingHeadset In Ear headset Over the Ears Headphone T-coil neck loopOptical audio cable 3.5mm phone jack to RCA cable Analog (RCA) audio cableDisc playerHiFi Audio playerTVTVUSB cablePower adaptorWall plug power adaptor MP3 playerSmart phone Laptop/PC TabletTv box15ApplicationDisc playerHiFi Audio playerTVTVTv box
Leather CaseOptional AccessoriesNeck Strap Clip Case Belt Clip Case Optical Cable Coaxial CableOver the Ears Headphone In Ear Headset T-coil Neck Loop Hanging Neck Strap Reset Pin3.5mm Phone Jack to RCA Cable16
FCC Statement:This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.- - - - -Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:-  Reorient or relocate the receiving antenna.-  Increase the separation between the equipment and receiver.-  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.-  Consult the dealer or an experienced radio/TV technician for help.This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:  (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes :  (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.FCC statement17
PAE-200 Eng Version 1.1www.vitasound.cominfo@vitasound.com1-877-967-0742

Navigation menu