Honey Bee HB-1131 Vita Sound Personal Audio Enhancer User Manual PAE 200 Manual ENG V01 1B
Honey Bee (Hong Kong) Ltd. Vita Sound Personal Audio Enhancer PAE 200 Manual ENG V01 1B
user manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2298484 |
| Application ID | DNzHyE3Ne7ECT4A2SOT2qA== |
| Document Description | user manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 90.84kB (1135514 bits) |
| Date Submitted | 2014-06-18 00:00:00 |
| Date Available | 2014-06-18 00:00:00 |
| Creation Date | 2013-12-23 17:50:37 |
| Producing Software | Adobe PDF library 10.01 |
| Document Lastmod | 2014-06-03 12:20:48 |
| Document Title | PAE-200_Manual_ENG_V01-1B |
| Document Creator | Adobe Illustrator CS6 (Macintosh) |
Personal Audio Enhancer PAE-200 User Manual English VitaSound TV™ PAE-200 TV In the Box PAE-200 TV handset Analog (RCA) AV cable PAE-200 TV Base unit Transmitter Headset case Headset AC/DC USB adaptor 5V 1A Hanging Neck strap Ear tips (large/regular/small) USB cable Contents Introduction Reset PAE-200 Handset Safety and Operation Instruction Handset and Base Unit auto-connection 10 PAE-200 Handset Identifying Parts Color Pairing 11 PAE-200 Base Unit Indentifying Parts FAQ 12-13 Getting Started Technical Specification 14 Base Unit Installation and Operation 5-6 Application 15 Handset Charging Other Optional Accessories 16 Certification and Compliance 17 PAE-200 Handset Operation Power On Adjust Volume Select Volume Booster Select EQ Sound Mode Power Off 1 PAE-200 Handset Indentifying Parts Top Left Front 10 Headset port (connect to headset) Hook for neck strap Power button EQ mode button EQ mode indicator (1-4) Power indicator Volume level indicator Volume booster switch Volume adjust buttons 10 Reset button 11 Charging port for Base Unit Right 11 Bottom PAE-200 Base Unit Indentifying Parts OPTICAL COAXIAL OPTICAL COAXIAL DIGITAL AUDIO IN 14 15 18 19 16 17 12 12 Power indicator 13 Power button (transmitting) 14 Charging dock for PAE Handset 15 Analog (RCA) audio-in port 16 Audio input mode switch (Optical/Coaxial) 17 Optical audio-in port 18 Coaxial audio-in port 19 USB power adaptor port 13 Getting Started 15 of the Base Unit to the RCA audio-out port of the TV box 19 1. Connect the RCA audio cable from the Analog audio-in port 2. Connect the USB power adaptor to the Base Unit power port 3. Put the Handset to the Base unit charging dock 4. After charging, put on the neck strap 5. Plug the headset to the headset port 6. Power on the TV and the TV box 7. Press the power button 8. Press the power button 9. When the Handset connects to the Base unit, the power indicator 10. Press the volume button 9 to adjust the volume level. Press the button for increasing the volume level and press the lowering the volume level. Volume level indicator 7 will be lit to present the volume level. 11. Severely hearing-impaired persons can turn the volume booster switch 12. Press the EQ mode button 4 to select different preset compensated EQ modes. EQ indicator 5 will show which mode (1, 2, 3 & 4) has been selected. EQ compensation for each person is different, select one of the modes according to the personal preferences. 13. Indicators 5 & 6 will be lit during any operation. The Handset will enter to sleep mode (to save power) if no more operation in process after 40 seconds. All indicators will be turned off automatically. 14. Press and hold the power button 3 will turn off the Handset. Power indicator off the Base Unit. Power indicator 12 will be lit out 15. For detailed instructions, please refer to the following manual 13 14 for battery charging. It is recommended to charge 5 hours for the first use on the Handset to power on the Base Unit, power indicator 12 will be lit up in red color 6 will be flashing to power on the Handset, the power indicator will turn to solid green. TV sound will be played through the headset. button for on and increase the volume output level. Except in special circumstances, please keep using the normal volume output will be lit out. Press and hold the power button 13 will turn Base Unit Installation and Operation Installation of Base Unit to TV 1. Connect the Base Unit with one end of the analog (RCA) audio cable Analog (RCA) audio cable HD TV TV box OPTICAL COAXIAL OPTICAL COAXIAL DIGITAL AUDIO IN Red connector to Red port, White connector to white port 2. Connect the other end of the analog (RCA) audio cable to the analog (RCA) audio-out port of the TV box Analog (RCA) audio cable Red connector to Red port, White connector to white port Optical audio cable Connect the USB Power Adaptor OPTICAL 1. Connect the USB cable (USB type A end) with the USB power adaptor 2. Plug the adaptor into the wall outlet 3. Connect the other end (USB micro B) of the USB cable into the USB adaptor port on the Base Unit COAXIAL OPTICAL COAXIAL DIGITAL AUDIO IN Base unit – Optical and Coaxial ports OPTICAL COAXIAL DIGITAL AUDIO IN Base Unit allows it to connect to other Smart TVs or advanced video/audio players through the Optical or Coaxial port. Optical and Coaxial cables are optional accessories. Please refer to the instruction manual in the box with the optional parts. Base Unit Power ON/OFF and Indicator 1. Press the power button until the Red power indicator is ON 2. It is ready to connect to the Handset when the red light is ON 3. Press and hold the power button until the power indicator is OFF Press Press and Hold Charging PAE Handset 1. Put the Handset into the Base Unit charging dock No need to turn on the Base Unit and Handset during battery charging 2. The power indicator of the Handset will turn on during battery charging 3. When charging is completed, the indicator will be turned off This product must be used VitaSound supplied accessory or specified chargers to charge Complete charging time: approximately 4 to 5 hours Battery operation time: approximately 6 to 8 hours The Handset power button will be flashing in orange and a double Beep sound will be generated through the headset while battery power level is low. Power on the Handset Press and hold Press and hold the power button until the Red power indicator is on and flashing. It will search and connect to the Base Unit automatically. The indicator will stop flashing and turn to green color when the Handset is paired to the Base Unit. Adjust Volume Press and release Press and release the Volume adjust button button to increase the volume level. button to lower the volume level. Volume level indicator There are 8 volume levels to control and each adjustment is 4dB. Volume indicator will show the volume level while adjusting. Select Volume Booster In some cases, user can turn on the volume booster to increase the volume output Normal output volume leve Amplified output volume level Except under special circumstances, it is not recommended to turn on the volume booster Normal output volume level Amplified output volume level Select EQ Sound Mode EQ mode indicator The PAE-200 is equipped with 4 different EQ sound modes. User can select the sound mode according to the personal preferences EQ mode button EQ mode 1 : overall optimized EQ mode 2 : Low frequency boost EQ mode 3 : Medium frequency boost EQ mode 4 : High frequency boost The corresponding indicator will be lit up after sound mode is selected. EQ mode cycle selection: Press the EQ mode button to switch the EQ mode once; from Mode 1 to Mode 2, from Mode 2 to Mode 3; from Mode 3 to Mode 4; from Mode 4 to Mode 1 and so on. It is recommended that new users try each EQ mode for 1 minute to find the most personal suitable EQ mode. Power Off the Handset To turn off the PAE Handset, press and hold the power button indicator is off. Press and hold until the power Sleep & Wake up modes To save power, PAE will go to sleep mode if the device is not operated in 40 seconds. All EQ and volume LED indicators will be off. To wake up the PAE, press any button on the device will resume all indicators. Any operation is only effective while the PAE is at wake up mode (indicators are on). Reset the PAE-200 When the PAE-200 cannot be operated in any situation, press the rest button by a small pin object to reset the PAE-200 Handset. Reset button Headset To achieve the best sound performance, please use the headset provided by VitaSound. After uses, please unplug the headset from the PAE and put it into the headset case. Ear tips Pairs of large, regular & small ear tips are also provided. User can choose the one to fit. AC/DC USB Power Adaptor Only use the AC/DC USB power adaptor provided by VitaSound. The rating of the adaptor is shown on the back of the USB adaptor. Attempt other power adaptor not provided by VitaSound will cause safety problem Auto-connection between PAE-200 and Base Unit blue trademark If the Handset color of the PAE-200 TV and the “VitaSound” trademark color on the Base Unit Transmitter are the same, they will be connected automatically within a range of 10 meters. No pairing progress is required. Auto-conn ection 10 meters blue color If two Base Units are installed within 5 meters, transmitting signal will be interfered. Power off either one of them according usage situation to prevent signal interference. 5 meters Cannot recognize the connection 10 Color Pairing and Connection If the Handset color of PAE-200 and the “VitaSound” trademark color on the Base Unit are not matched, the Handset and Base Unit will not be paired. Please be aware of the PAE-200 Handset color and the “VitaSound” trademark color of the Base Unit before use. Blue color Blue color Gray color Blue color Blue color Gray color Gray color Gray color Gray color Blue color 11 Frequently Asked Questions Symptom Possible Cause The PAE-200 Handset is not working The PAE-200 Handset is off. The PAE-200 Handset is out of battery The PAE-200 Handset is hang off. All indicators of the PAE-200 Handset turn off themselves, except the power indicator. The behavior is normal. The indicators will be off automatically for power saving when no operation is performed for 40 seconds. The Handset battery is running low. The Base Unit is power off. Red LED of Power indicator of The PAE-200 Handset exceeds 10 meters of the the PAE-200 Handset is flashing operation range from the Base unit. The PAE-200 Handset cannot connect to the Base Unit within the 10 meters operation range. Possible Corrective Action Turn on the PAE-200 Handset. Charge the PAE-200 Handset immediately. Press the Rest Button with a small pin object to reset the PAE-200 Handset. Page N/A Turn off the PAE-200 and start charging. Turn on the Base Unit. Make sure The PAE-200 Handset is in the operation range. 10 Please contact VitaSound service. The volume level of the PAE-200 is too low Increase the PAE-200 Handset volume output level. The headset is not plugged into the PAE-200 Handset Make sure the headset is firmly plugged into the PAE-200 Handset. properly. Make sure the TV is turned on. (Please read your TV manual for detail) Make sure the volume of the TV is on. (Please read your TV manual for detail) Make sure the mute mode of your TV is not activated. (Please read your TV manual for detail) No sound is produced from the When using the analog (RCA) audio cable to connect the Base Unit and TV headset while the Red indicator box, make sure the optical and coaxial cables are disconnected with the of the PAE-200 Handset is Base Unit and TV box. solid on and the wireless No audio signal from the Base Unit or TV. When using the analog (RCA) audio cable to connect the Base Unit and TV connection is normal. box, make sure the optical and coaxial cables are disconnected with the Base Unit and TV box. (Please read your TV box manual for detail) When using the optical cable to connect the Base Unit and TV box, make sure 1) the optical cable is connected with the Base Unit and TV box properly 2) the Audio input mode switch on the Base Unit is switched into “ Optical audio input”. 12 Symptom Possible Cause No sound is produced from the headset while the Red indicator of the PAE-200 Handset is solid No audio signal from the Base Unit or TV on and the wireless connection is normal. The PAE-200 Handset and the Base Unit are out of Auto-connection between the the 10 meters operation range. PAE-200 Handset and the Base The auto-connection dose NOT work when the Unit is not working PAE-200 Handset color and the “VitaSound” trademark color on the Base Unit are different. Signal interference occurs More than 1 Base Unit are installed in 5 meters Possible Corrective Action When using the coaxial cable to connect the Base Unit and TV box, make sure 1) the coaxial cable is connected with the Base Unit and TV box properly 2) the Audio input mode switch on the Base Unit is switched into “ Coaxial audio input”. Make sure the PAE-200 is within a range of 10 meters from the Base Unit. Page Make sure the PAE-200 Handset color and the “VitaSound” trademark color on the Base Unit are the same before use. 11 1) Turn off one Base Unit is not in use, or 2) Keep the distance between each Unit more than 5 meters 10 13 Technical specification PAE-200 TV Handset Dimensions: Weight: Battery: Operation time: Charging time: Headset Socket: Output signal frequency range: EQ sound mode: Volume control: Output power: Digital signal processing: 100.2mm x 60mm x 19.1mm 88 gram Built-in rechargeable lithium-ion, 2000 mAh 6 – 8 hours (fully charged) 4 – 5 hours 3.5mm stereo jack plug 200 – 16,000 Hz 4 modes 8 steps (4dB/step) 60 mW (16Ω load) 32 kHz sampling frequency 16 bit resolution in stereo Radio communication frequency: 2.4 GHz, ISM band Radio communication range: 10m indoor, clear line or straight Radio communication characteristics: Automatic channel searching Coexists with other radio transmitters operating on the 2.4GHz frequency band Topology: Point-to-point Antenna Type: Internal SMD antenna Base Unit Transmitter Dimension: Wieght: Power: Audio source input: Digital radio transmission: Radio communication range: Radio communication characteristics: Radio communication range: Topology: Transmitter output: 101.5mm x 94.1mm x 40.1mm 97 gram 5V 1A (5W) Analog (RCA) Jack (Red/White) Optical Jack 44.1kHz PCM / 48kHz PCM Coaxial Jack 44.1kHz PCM / 48kHz PCM 2.4 GHz, ISM band Coexists with other radio transmitters operating on the 2.4GHz ISM band 10m indoor, clear line or straight Automatic channel searching 10m indoor, clear line or straight Point-to-point 8dBmW For the digital (Optical or Coaxial) connection, the Base Unit dose NOT support Dolby Digital 2.1 / 5.1 / 7.1 audio coding. Environmental Requirements Operating temperature: Relative humidity: 0 °C to 35 °C (32 °F to 95 °F) 5 % to 95 % Regulatory requirements Complies with the following requirements: CE, FCC, RoHS and C-Tick 14 Smart phone Wall plug power adaptor MP3 player Laptop/PC Tablet USB cable Power adaptor 3.5mm phone jack to RCA cable Analog (RCA) audio cable Optical audio cable TV Base Unit Transmitter TV Tv box TV Charging Tv box HiFi Audio player TV PAE-200 Handset Disc player HiFi Audio player Disc player Headset Over the Ears Headphone Application In Ear headset T-coil neck loop 15 Optional Accessories Leather Case Neck Strap Clip Case Belt Clip Case Optical Cable Coaxial Cable Over the Ears Headphone In Ear Headset T-coil Neck Loop Hanging Neck Strap Reset Pin 3.5mm Phone Jack to RCA Cable 16 FCC statement FCC Statement: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. ----Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. 17 www.vitasound.com info@vitasound.com 1-877-967-0742 PAE-200 Eng Version 1.1
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Create Date : 2013:12:23 17:50:37+08:00 Creator : Adobe Illustrator CS6 (Macintosh) Modify Date : 2014:06:03 12:20:48+08:00 XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-21:37:19 Format : application/pdf Title : PAE-200_Manual_ENG_V01-1B Metadata Date : 2014:06:03 12:20:48+08:00 Creator Tool : Adobe Illustrator CS6 (Macintosh) Thumbnail Width : 256 Thumbnail Height : 44 Thumbnail Format : JPEG Thumbnail Image : (Binary data 3521 bytes, use -b option to extract) Instance ID : uuid:cf63e899-9c08-ab4b-8ed5-f53b91d93919 Document ID : xmp.did:0480117407206811822A9F793AE5743A Original Document ID : uuid:5D20892493BFDB11914A8590D31508C8 Rendition Class : proof:pdf Derived From Instance ID : uuid:887fbd6d-314f-934f-a346-22ab83b57f83 Derived From Document ID : xmp.did:F2277DE00F206811822AE65EBAC1904E Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8 Derived From Rendition Class : proof:pdf History Action : saved, saved History Instance ID : xmp.iid:3888F1589A46E311A965E0587435060B, xmp.iid:0480117407206811822A9F793AE5743A History When : 2013:11:06 12:17:28+08:00, 2013:12:23 17:50:32+08:00 History Software Agent : Adobe Illustrator CS5, Adobe Illustrator CS6 (Macintosh) History Changed : /, / Startup Profile : Print Has Visible Overprint : False Has Visible Transparency : True N Pages : 1 Max Page Size W : 197.999973 Max Page Size H : 118.000894 Max Page Size Unit : Millimeters Font Name : HelveticaNeueLTCom-Lt, HelveticaNeueLT-LightItalic, HelveticaNeueLT-Light, MHeiHKS-Light, MHeiHKS-Medium, AdobeMingStd-Light, STHeitiSC-Medium Font Family : Helvetica Neue LT Com, HelveticaNeue LT 45 Light, HelveticaNeue LT 45 Light, MHeiHKS, MHeiHKS, Adobe 明體 Std, 黑体-简 Font Face : 45 Light, Italic, Regular, Light, Medium, L, 中等 Font Type : Open Type, TrueType, TrueType, Open Type, Open Type, Open Type, TrueType Font Version : Version 2.01;2006, Version 6.1; 2002, Version 6.1; 2002, Version 1.2.0, Version 1.2.0, Version 6.008;PS 6.001;hotconv 1.0.67;makeotf.lib2.5.33168, 9.0d4e1 Font Composite : False, False, False, False, False, False, False Font File Name : HelveticaNeueLTCom-Lt.ttf, Helvetica LT 46 Light Italic.ttf, Helvetica LT 45 Light.ttf, MHeiHKS-Light.OTF, MHeiHKS-Medium.OTF, AdobeMingStd-Light.otf, STHeiti Medium.ttc Plate Names : Cyan, Magenta, Yellow, Black Swatch Groups Group Name : 鮮豔 Swatch Groups Group Type : 1 Swatch Groups Colorants Swatch Name: C=60 M=90 Y=0 K=0 Swatch Groups Colorants Mode : CMYK Swatch Groups Colorants Type : PROCESS Swatch Groups Colorants Cyan : 60.000004 Swatch Groups Colorants Magenta : 90.000000 Swatch Groups Colorants Yellow : 0.003099 Swatch Groups Colorants Black : 0.003099 Producer : Adobe PDF library 10.01 Page Count : 21EXIF Metadata provided by EXIF.tools