Honeywell 01-9437 B574 NETWORK CONTROLLER User Manual

INNCOM International Inc. B574 NETWORK CONTROLLER B574 Datasheet v1 0 DS

a href="https://usermanual.wiki/Honeywell" itemprop="url"> Honeywell >

Users Manual

INNCOMB574DatasheetOverviewThe INNCOM B574 Network Controller is an INNCOM Integrated Room Automation System (IRAS) product that provides the PAN Coordinator functionality in INNCOM’s Layer-2 802.15.4 Zigbee Mesh network. The B574 serves as the gateway between the wireless routers sending guestroom network data back to the wired network server, where it can be managed by INNCOM’s building management system (INNControl). Features• Supports PoE (Power over Ethernet)[Note: This feature is not currently implemented] • 128 bit AES encryption • Indoor range up to 100ft • 2.4Ghz IEEE 802.15.4 compliant RF transceiver (CC2430 radio core) • Compact physical dimension • DIN Rail mounting option • In general, 50 B574s can be supported in one network segment* SpecificationParameterB574RF Data Rate 250kbps Indoor/Urban range 100ft Transmit Power approximately 10mW Receive Sensitivity -94.6dBm Frequency Band 2.4Ghz Encryption AES-128 Protocol 802.15.4 Frequency Channels 11-26 Network Topology Mesh Maximum per network segment Up to 50* Supply Voltage 12VDC Current Consumption 200mA Operating Ambient Temperature 0-40 ° C Dimensions 86mm x 78mm x 40mm Agency Approvals FCC Part 15, CE Mark ETSI, RoHS *Actualnetworksupportmaybehigherorlower,dependingontrafficpatterns,selectedantennatypes,andenvironmentalconsiderations.Figure 1: B574
INNCOM B574 Datasheet Page | 2 B574NetworkingTopologyFigure 2: B574 Layer-2 Network Topology The B574 uses ZigBee 802.15.4 technology to create RF Mesh networks. This software-based feature set allows the many network members to link-up in a dynamic way, forming a redundant mesh of routers. A typical router in an INNCOM IRAS is a Layer-2 thermostat or a Layer-2 PC-502. The mesh network is managed by the B574 functioning as the PAN Coordinator. Each B574 can accommodate up to 50 ZigBee routers; each B573 MBX bridge can handle 50 B574 Coordinators. MBX bridges can be added as necessary to accommodate the number of B574s and their routers (50 routers per B574 × 50 B574s per B573 = 2500 routers per B573). (See also the B574 Engineering Manual, v1.0, and the B573 Media Connector Users Guide, v1.0.) The server configures the B574 Coordinator to a selected RF channel and PAN ID on start up. Once it has started a PAN, the coordinator can allow routers in the network to join the PAN. The coordinator transmits and receives RF data transmissions and assists in routing data through the mesh network. In Figure 2 above, data travels along the red route from and to the router on the upper right corner. Should one of the links (hops) break due to a localized disturbance or the failure of a router, then the network would dynamically form another route for the packet; the communication could therefore be maintained even if the network partially fails.
Download:
Mirror Download [FCC.gov]
Document ID1259901
Application IDIWICPhcn6wmmAxRiQDrR4g==
Document DescriptionUsers Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize133.05kB (1663094 bits)
Date Submitted2010-03-31 00:00:00
Date Available2010-03-31 00:00:00
Creation Date2009-08-03 08:56:47
Producing SoftwareAcrobat Distiller 6.0.1 (Windows)
Document Lastmod2010-03-31 08:31:05
Document TitleMicrosoft Word - B574 Datasheet v1.0 DS.doc
Document CreatorPScript5.dll Version 5.2.2
Document Author: daniel.storms
FCC ID Filing: GTC01-9437

Navigation menu