Honeywell 660W HSOM660 User Manual Installation Guide
Honeywell International Inc HSOM660 Installation Guide
Contents
- 1. User Manual
- 2. User Manual_Installation Guide
- 3. User manual
User Manual_Installation Guide
HSOM660 Installation guide. Contains Information proprietary to Honeywell, Inc. Honeywell Internal Page 1 of 7 Dolphin® SOM Installation Description 1.0 SYSTEM OVERVIEW The Dolphin® SOM Radio Module is offered with “Android 7.1” based operating system. The hardware will be made up of the basic system components shown in Figure 1 below. The unit will be available per the following matrix: The SOM module has radios for LTE (+ 2G, 3G, 4G), GPS, 802.11a/b/g/n/ac WLAN and Bluetooth 2.0/4.0/5.0. The WLAN and Bluetooth radio modules in the product will have a shared antenna. Similar to a Smartphone, the device can be used up to head or in speakerphone mode. 2.0 Baseline Terminal Features The following is a detailed list of the base terminal features. • • • • • • • Operating System Android 7.1 or later ® Qualcomm SDM660 Octa Core 2.2GHz Processor RAM Memory: 4GB LPDDR4 SDRAM (discrete) FLASH Memory: 32 GB MLC eMMC Managed NAND 4-bit micro Secure Digital Card Interface Dual SIM Support High Speed USB Client / High Speed USB Host / Charging Connector (IO connector - 10 pos) • • • • • Integrated gyroscope Bluetooth Radio with Internal Antenna 802.11a/b/g/n/ac Radio with Internal Antenna GPS Support with Internal Antenna WWAN Radio features air interface support for a single global SKU with support for voice & internal antennas: 3.0 Regulatory Compliance This product regulatory compliance information is shown in Regulatory sheet document. Honeywell Internal Page 2 of 7 4.0 User Utility Support end user mode and RF continuous transmit mode with the driver and tool. User mode: WAN RF mode: Honeywell Internal Page 3 of 7 5.0 Layout Instruction and Antenna OEM Integrators must follow the instructions and limitations for the chosen antenna schemes exactly as stated below.. Antenna PIFA antenna RF trace Corresponding 50-ohm characteristic impedance, the length and routing as following structure. WLAN chain0/BT: Top layer: 120mi ANT to inner Inner layer to top 305 mil SOM pin Maintains a solid ground plane under the RF signal trace, and use strip-line structure for inner layer of the PCB, and ensure the ground return path is uninterrupted. Honeywell Internal Page 4 of 7 WLAN chain1: 50 ohms Coaxial cable to antenna, 1020 mil. Top layer: Connector 504 mil SOM pin Maintains a solid ground plane under the RF signal trace, and use strip-line structure for inner layer of the PCB, and ensure the ground return path is uninterrupted. Honeywell Internal Page 5 of 7 WAN main: Top layer: ANT 95 mil to inner1 Inner1 layer: to top 59 mil to inner2 Inner2 layer: to inner1 375 mil SOM pin Maintains a solid ground plane under the RF signal trace, and use strip-line structure for inner layer of the PCB, and ensure the ground return path is uninterrupted. Honeywell Internal Page 6 of 7 WAN Aux (RX only): Top layer: to inner 137 mil ANT Inner layer: to top SOM pin Maintains a solid ground plane under the RF signal trace, and use strip-line structure for inner layer of the PCB, and ensure the ground return path is uninterrupted. Honeywell Internal Page 7 of 7
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Page Count : 7 Producer : GPL Ghostscript 8.15 Create Date : 2018:02:02 19:51:03 Modify Date : 2018:02:02 19:51:03 Title : Microsoft Word - SOM FCC + CE Installation guide_20180202.docx Creator : PScript5.dll Version 5.2.2 Author : John1EXIF Metadata provided by EXIF.tools