Honeywell 99EXLW 99EX Mobile computer User Manual 1 of 2

Honeywell International Inc 99EX Mobile computer 1 of 2

User Manual 1 of 2

Dolphin™ 99EX Mobile Computerwith Windows® Embedded Handheld 6.5User’s GuidePreliminary Draft 1/19/11
DisclaimerHoneywell International Inc. (“HII”) reserves the right to make changes in specifications and other information contained in this document without prior notice, and the reader should in all cases consult HII to determine whether any such changes have been made. The information in this publication does not represent a commitment on the part of HII.HII shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from the furnishing, performance, or use of this material.This document contains proprietary information that is protected by copyright. All rights are reserved. No part of this document may be photocopied, reproduced, or translated into another language without the prior written consent of HII.Web Address: www.honeywellaidc.comTrademarksDolphin, Dolphin RF, HomeBase, Mobile Base, and QuadCharger are trademarks or registered trademarks of Hand Held Products, Inc. or Honeywell International Inc.Microsoft, Windows, Windows Mobile, Windows Embedded Handheld, Windows CE, Windows 98 Second Edition, Windows NT, Windows 2000, Windows ME, Windows XP, ActiveSync, Outlook, and the Windows logo are trademarks or registered trademarks of Microsoft Corporation.Other product names mentioned in this manual may be trademarks or registered trademarks of their respective companies and are the property of their respective owners.PatentsFor patent information, please refer to www.honeywellaidc.com/patents.Other Trademarks The Bluetooth trademarks are owned by Bluetooth SIG, Inc., U.S.A. and licensed to Honeywell. ©2011 Honeywell International Inc. All rights reserved.Preliminary Draft 1/19/11
 iiiChapter 1 - Agency InformationLaser Safety.........................................................................................................................1-1Label Locations..............................................................................................................1-1Laser Safety Label .........................................................................................................1-1Laser Eye Safety Statement ..........................................................................................1-1LED Safety...........................................................................................................................1-2LED Safety Statement....................................................................................................1-2Infrared LED Safety Statement ......................................................................................1-2UL and C-UL Statement.......................................................................................................1-2Approvals by Country...........................................................................................................1-2R&TTE Compliance Statement—802.11a/b/g/n, Bluetooth, and/or GSM............................1-2Dolphin RF Terminal—802.11a/b/g/n, Bluetooth, and/or GSM............................................1-3Canadian Compliance..........................................................................................................1-4Conformité à la règlementation canadienne ........................................................................1-4RF Exposure Information (SAR) ..........................................................................................1-4For European Community Users .........................................................................................1-5Waste Electrical and Electronic Equipment Information ......................................................1-5Chapter 2 - Getting StartedOut of the Box ......................................................................................................................2-1Home Screen .......................................................................................................................2-4Title Bar................................................................................................................................2-4Icons in the Title Bar ............................................................................................................2-4Horizontal Scroll...................................................................................................................2-7Tile Bar.................................................................................................................................2-7Pop-Up Menus .....................................................................................................................2-7Selecting Programs..............................................................................................................2-8File Explorer.........................................................................................................................2-8Search..................................................................................................................................2-9Chapter 3 - Hardware OverviewStandard Configurations for the 99EX .................................................................................3-1Peripherals for the 99EX......................................................................................................3-2Accessories for the 99EX.....................................................................................................3-3Front Panel: 99EX................................................................................................................3-5Front Panel Features for the 99EX ................................................................................3-5Back Panel: 99EX  ...............................................................................................................3-7Back Panel Features for the 99EX.................................................................................3-7Side Panels: 99EX ...............................................................................................................3-9Left Side ........................................................................................................................3-9Right Side ......................................................................................................................3-9Installing a Memory Card ...................................................................................................3-10Installing a SIM Card..........................................................................................................3-10Bottom Panel: 99EX...........................................................................................................3-11I/O Connector.....................................................................................................................3-11Table of ContentsPreliminary Draft 1/19/11
 ivUsing the Touch Panel ...................................................................................................... 3-12Installing a Screen Protector........................................................................................3-12Healthcare Housing........................................................................................................... 3-12Batteries ............................................................................................................................3-13Main Battery Pack........................................................................................................ 3-13Internal Backup Battery ............................................................................................... 3-14Managing Battery Power ............................................................................................. 3-15Checking Battery Power .............................................................................................. 3-16Resetting the Terminal ......................................................................................................3-16Soft Reset (Warm Boot)............................................................................................... 3-16Hard Reset (Cold Boot) ............................................................................................... 3-17Suspend Mode .................................................................................................................. 3-17Chapter 4 - Using the Scan Image EngineOverview..............................................................................................................................4-1Angled Imaging..............................................................................................................4-1Laser Safety ........................................................................................................................ 4-1LED Safety .......................................................................................................................... 4-1Image Engine Specifications ............................................................................................... 4-1N5603 Beam Divergence Angle .................................................................................... 4-1Depth of Field ................................................................................................................ 4-2Supported Bar Code Symbologies  ..................................................................................... 4-3Decoding .............................................................................................................................4-4To Decode a Bar Code.................................................................................................. 4-4Aiming Options .............................................................................................................. 4-4Capturing Images ................................................................................................................4-6Taking an Image............................................................................................................ 4-6Uploading Images..........................................................................................................4-7Chapter 5 - Using the Color CameraOverview..............................................................................................................................5-1Taking a picture using the Camera Demo tool .................................................................... 5-1Options ..........................................................................................................................5-2Taking a picture using the Windows Embedded Handheld 6.5 Camera tool ......................5-2Menu.............................................................................................................................. 5-3Options ..........................................................................................................................5-3Recording Video.................................................................................................................. 5-3Chapter 6 - Using the KeyboardsAvailable Keyboards............................................................................................................6-1Keyboard Combinations ................................................................................................ 6-1Common Buttons........................................................................................................... 6-1Using the Function Keys...................................................................................................... 6-2Using the Modifier Keys ......................................................................................................6-3Using the Navigation Keys .................................................................................................. 6-3Preliminary Draft 1/19/11
 v34-Key Alpha/Numeric Keyboard ........................................................................................ 6-5ALPHA Key....................................................................................................................6-534-Key Alpha/Numeric Keyboard Combinations ........................................................... 6-634-Key Numeric (Calculator) Keyboard...............................................................................6-8ALPHA Key....................................................................................................................6-834-Key Numeric (Calculator) Keyboard Combinations..................................................6-943-Key Alpha/Numeric Keyboard ...................................................................................... 6-11Number Lock (NUM) Key.............................................................................................6-1143-Key Keyboard Combinations.................................................................................. 6-1255-Key Full Alpha/Numeric Keyboard ...............................................................................6-1455-Key Keyboard Combinations.................................................................................. 6-14Chapter 7 - System SettingsOverview..............................................................................................................................7-1Clock & Alarms.................................................................................................................... 7-2Personal Menu .................................................................................................................... 7-3Buttons...........................................................................................................................7-3System Menu.......................................................................................................................7-7About .............................................................................................................................7-8Backlight ........................................................................................................................7-9Battery .........................................................................................................................7-10Certificates...................................................................................................................7-10Customer Feedback .................................................................................................... 7-10Encryption....................................................................................................................7-11Error Reporting ............................................................................................................ 7-11External GPS............................................................................................................... 7-11Five Volt Control .......................................................................................................... 7-12HISS ............................................................................................................................7-12Managed Programs ..................................................................................................... 7-14Memory........................................................................................................................7-14RIL ...............................................................................................................................7-15Power...........................................................................................................................7-16Regional Settings.........................................................................................................7-16Remove Programs.......................................................................................................7-17Screen ...............................................................................................................................7-18Task Manager..............................................................................................................7-19Chapter 8 - CommunicationConnections Menu...............................................................................................................8-1Using the IrDA Port..............................................................................................................8-2IrDA Port Location ......................................................................................................... 8-2Sending Data................................................................................................................. 8-2Receiving Data .............................................................................................................. 8-3Connections Manager ......................................................................................................... 8-4To Access the Connections Manager............................................................................8-4Tasks .............................................................................................................................8-4Advanced....................................................................................................................... 8-5Preliminary Draft 1/19/11
 viDolphin Wireless Manager ..................................................................................................8-6Dolphin Wireless Manager Window............................................................................... 8-6Enabling the Radios.......................................................................................................8-6Accessing Radio Configuration Utilities......................................................................... 8-7Communication....................................................................................................................8-8Installing Additional Software ............................................................................................ 8-10Adding Programs to the Terminal Using ActiveSync...................................................8-10Adding Programs Directly from the Internet................................................................. 8-1199EX COM Port Assignment Table................................................................................... 8-12Chapter 9 - Working with Wireless Wide Area Networking (WWAN)Overview..............................................................................................................................9-1Penta Band Antenna......................................................................................................9-1SIM Card Installation ...........................................................................................................9-3Installing a SIM Card ...........................................................................................................9-4Enabling the WWAN Radio .................................................................................................9-5GSM/HSPA+ Global Radio Dolphin Models........................................................................9-5Voice Communication.................................................................................................... 9-5Audio Modes..................................................................................................................9-5Volume Control.............................................................................................................. 9-6Accessing the Dialer Window ........................................................................................ 9-6Dialing............................................................................................................................ 9-6Sending Calls.................................................................................................................9-7Ending Calls................................................................................................................... 9-7Accessing Voice Mail..................................................................................................... 9-7View Options..................................................................................................................9-7Setup Options......................................................................................................................9-7Data Communication........................................................................................................... 9-9Establishing Data Communication (GSM/HSPA+ Global Radio Dolphin Models)............... 9-9Ending the Data Connection........................................................................................9-11Manual Network Selection.................................................................................................9-12GSM/CDMA Dolphin Models............................................................................................. 9-13Gobi Manager.............................................................................................................. 9-13Establishing Data Communication (GSM/CDMA Dolphin Models).............................. 9-14Chapter 10 - Working with the Bluetooth RadioEnabling the Bluetooth Radio............................................................................................ 10-1Connecting to Other Bluetooth Devices ............................................................................10-2Pairing and Trusted Devices .............................................................................................10-4Types of Devices and Services ......................................................................................... 10-5Connecting to Bluetooth Printers.......................................................................................10-6Connecting to Bluetooth Headsets.................................................................................... 10-6Transferring Files...............................................................................................................10-7Making the Terminal Discoverable .................................................................................... 10-8Selecting COM Ports......................................................................................................... 10-8Chapter 11 - Working with GPSOverview............................................................................................................................11-1Preliminary Draft 1/19/11
 viiAssisted GPS Support.......................................................................................................11-1Powering the GPS Module ................................................................................................ 11-1Communication Ports ........................................................................................................ 11-1Selecting the Port ........................................................................................................11-1COM7 ..........................................................................................................................11-2GPS Intermediate Driver.............................................................................................. 11-2GPS Demo ........................................................................................................................ 11-2Chapter 12 - Dolphin 99EX HomeBase DeviceOverview............................................................................................................................12-1Parts and Functions...........................................................................................................12-2Power ................................................................................................................................12-5Serial Connector................................................................................................................12-5Charging the Main Battery.................................................................................................12-6To Power a Terminal and Charge its Main Battery...................................................... 12-6Charging a Spare Battery in the Auxiliary Battery Well ............................................... 12-6Communication..................................................................................................................12-7Connecting the Communication Cables ...................................................................... 12-7Establishing Communication .......................................................................................12-7Communicating with the Dolphin Terminal .................................................................. 12-7Verifying Data Transfer................................................................................................ 12-8RS232 Communications Cables........................................................................................12-8RS232 Pin Configuration ............................................................................................. 12-8Mounting............................................................................................................................12-9Desk Mounting.............................................................................................................12-9Chapter 13 - Dolphin 99EX eBase DeviceOverview............................................................................................................................13-1Unpacking the eBase................................................................................................... 13-1Parts and Functions...........................................................................................................13-2Front Panel .................................................................................................................. 13-2Back Panel ..................................................................................................................13-4Bottom Panel ............................................................................................................... 13-5Power ................................................................................................................................13-5Connecting Power to the eBase .................................................................................. 13-5Charging the Main Battery.................................................................................................13-6To Power a Terminal and Charge its Main Battery...................................................... 13-6Charging a Spare Battery in the Auxiliary Battery Well ............................................... 13-6Communication..................................................................................................................13-7Software Requirements ............................................................................................... 13-7Establishing Ethernet Communication.........................................................................13-7Establishing USB Communication............................................................................... 13-8Mounting............................................................................................................................13-8Using the DIN Rail ....................................................................................................... 13-8Chapter 14 - Dolphin 99EX Mobile Base DeviceOverview............................................................................................................................14-1Preliminary Draft 1/19/11
 viiiFront Panel........................................................................................................................ 14-2Bottom Panel..................................................................................................................... 14-3Back Panel and Mounting Brackets...................................................................................14-4Mounting............................................................................................................................14-5Safety Precautions.......................................................................................................14-5Installation....................................................................................................................14-5Powering the Dolphin Terminal .........................................................................................14-6Charging the Dolphin Terminal..........................................................................................14-6Establishing Communication ............................................................................................. 14-6Connecting the Communication Cables ...................................................................... 14-6Establishing ActiveSync or Windows Mobile Device Center Communication .............14-7RS232 Communication Cables .........................................................................................14-7Serial Connector..........................................................................................................14-8Chapter 15 - Dolphin 99EX ChargeBase DeviceOverview............................................................................................................................15-1Parts and Functions...........................................................................................................15-2Front Panel .................................................................................................................. 15-2Back Panel...................................................................................................................15-3Power ................................................................................................................................15-3Connecting Power to the ChargeBase  ............................................................................. 15-3Charging the Main Battery.................................................................................................15-4To Power a Terminal and Charge its Main Battery...................................................... 15-4Mounting............................................................................................................................15-4Chapter 16 - Dolphin 99EX Net Base DeviceOverview............................................................................................................................16-1Parts and Functions...........................................................................................................16-2Front Panel .................................................................................................................. 16-2Back Panel ..................................................................................................................16-3Bottom Panel ............................................................................................................... 16-4Power ................................................................................................................................16-4Connecting Power to the Net Base..............................................................................16-4Charging the Main Battery.................................................................................................16-5To Power a Terminal and Charge its Main Battery...................................................... 16-5Communication..................................................................................................................16-5Software Requirements ............................................................................................... 16-5Connecting the Dolphin Terminal to the Net Base ............................................................16-5Mounting the Net Base...................................................................................................... 16-6Using the DIN Rail ....................................................................................................... 16-6Chapter 17 - Dolphin 99EX QuadCharger DeviceOverview............................................................................................................................17-1Parts and Functions...........................................................................................................17-2Supplying Power................................................................................................................17-3Inserting and Charging Batteries....................................................................................... 17-3Preliminary Draft 1/19/11
 ixMounting............................................................................................................................17-4Desk Mounting.............................................................................................................17-4Troubleshooting.................................................................................................................17-5Chapter 18 - Dolphin 99EX Charge Rack and Net Rack DeviceOverview............................................................................................................................18-1Parts and Functions...........................................................................................................18-2Front and Side Panel................................................................................................... 18-2Back Panel...................................................................................................................18-2Power ................................................................................................................................18-2Connecting Power to the Rack .................................................................................... 18-3Charging the Main Battery.................................................................................................18-3To Power a Terminal and Charge its Main Battery...................................................... 18-3Communication (Net Rack Only)....................................................................................... 18-3Software Requirements ............................................................................................... 18-3Connecting the Dolphin Terminal to the Net Rack ............................................................18-4Mounting the Rack.............................................................................................................18-4Chapter 19 - Customer SupportProduct Service and Repair...............................................................................................19-1Online Product Service and Repair Assistance........................................................... 19-1Technical Assistance.........................................................................................................19-2Online Technical Assistance........................................................................................19-2Limited Warranty ...............................................................................................................19-3How to Extend Your Warranty ..................................................................................... 19-4Preliminary Draft 1/19/11
 xPreliminary Draft 1/19/11
1 - 11Agency InformationDolphin 99EX mobile computers meet or exceed the requirements of all applicable standards organizations for safe operation. However, as with any electrical equipment, the best way to ensure safe operation is to operate them according to the agency guidelines that follow. Read these guidelines carefully before using your mobile computer.Laser SafetyLabel LocationsLaser Safety LabelIf the following label is attached to your product, it indicates the product contains an engine with a laser aimer: Laser Eye Safety StatementThis device has been tested in accordance with and complies with IEC60825-1(Ed. 2.0), EN60825-1:2007. Complies with 21 CFR 1040.10 and 1040.11, except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007. LASER LIGHT, DO NOT STARE INTO BEAM. CLASS 2 LASER PRODUCT, 1.0 mW MAX OUTPUT: 650nm, pulse duration of 15.5msec, and pulse repetition rate of 32.25 Hz.Caution! Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.                 Compliance Label Dolphin 99EX with WWANCompliance Label Dolphin 99EX with WLANImage Engines with Integrated Laser AimersPreliminary Draft 1/19/11
1 - 2LED SafetyLED Safety StatementLEDs have been tested and classified as “EXEMPT RISK GROUP” to the Standard: IEC 62471:2006.Infrared LED Safety StatementCaution!  Do not view directly with optical instruments. UL and C-UL StatementUL and C-UL listed: UL60950-1 2nd Edition, and CSA C22.2 No. 60950-1-07 2nd Edition, ISA 12.12.01:2007, CAN/CSA: C22.2 No. 213-M1987.Approvals by Country R&TTE Compliance Statement—802.11a/b/g/n, Bluetooth, and/or GSMDolphin RF terminals are in conformity with all essential requirements of the R&TTE Directive (1999/5/EC). This product is marked with   in accordance with the Class II product requirements specified in the R&TTE Directive. In addition, this product complies to 2006/95/EC Low Voltage Directive when supplied with the recommended power supply. Honeywell shall not be liable for use of our product with equipment (i.e., power supplies, personal computers, etc.) that is not CE marked and does not comply with the Low Voltage Directive.Country EMC, Radio, & SAR SafetyU.S.A. FCC Part 15, Subpart BFCC Part 15, Subpart C, 15.247FCC Part 15, Subpart EFCC Part 22HFCC Part 24EFCC SAR OET 65 Supplement CUL60950-1, 2nd EditionCanada ICES-003 (Class B)RSS 132RSS 133RSS 210CSA C22.2 No. 60950-1-07,2nd EditionEuropean Community/CE EN300328, EN301893, EN55022, EN55024, EN301489-1, EN301489-7/24, EN301489-17, 3GPPTS 51.010-1, EN301511,  EN301908, EN50360, EN50361, EN50371, EN50392, IEC6220-1, IEC6220-2, EN300440, 301 389-25 (CDMA 2000)EN60950-1, 2nd EditionEN60825-1, 2nd EditionPreliminary Draft 1/19/11
1 - 3The equipment is intended for use throughout the European Community; PAN European Frequency Range: 2.402–2.480 GHz. Restrictions for use in France are as follows: • Indoor use: Maximum power (EIRP*) of 100 mW for the entire 2.400–2.4835 GHz • Outdoor use: Maximum power (EIRP*) of 100 mW for the 2.400–2.454 GHz band & maximum power (EIRP*) of 10 mW for the 2.454–2.483 MGHz band.• 5Ghz band: UNII (Unlicensed National Information Infrastructure) or band1 (5.150 to 5.250 GHz) is restricted to indoor use only. Any other use will make the operation of the device illegal.For further information, please contact:Honeywell Scanning & Mobility Europe BVNijverheidsweg 95627 BT EindhovenThe NetherlandsFCC RequirementsDolphin RF Terminal—802.11a/b/g/n, Bluetooth, and/or GSMThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help.In accordance with FCC 15.21, changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.If necessary, the user should consult the dealer or an experienced radio/television technician for additional suggestions. The user may find the following booklet helpful: “Something About Interference.” This is available at FCC local regional offices. Our company is not responsible for any radio or television interference caused by unauthorized modifications of this equipment or the substitution or attachment of connecting cables and equipment other than those specified by our company. The correction is the responsibility of the user. Use only shielded data cables with this system.Preliminary Draft 1/19/11
1 - 4Canadian ComplianceThis Class B digital apparatus complies with Canadian ICES-003 and RSS210. Operation is subject to the following two conditions: 1. This device may not cause harmful interference.2. This device must accept any interference received, including interference that may cause undesired operation. Conformité à la règlementation canadienneCet appareil numérique de la Classe B est conforme à la norme NMB-003 et RSS210 du Canada. Son fonctionnement est assujetti aux conditions suivantes: 1. Cet appareil ne doit pas causer de brouillage préjudiciable. 2. Cet appareil doit pouvoir accepter tout brouillage reçu, y compris le brouillage pouvant causer un fonctionnement indésirable.RF Exposure Information (SAR)This mobile phone meets the government's requirements for exposure to radio waves. This phone is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government.The exposure standard for wireless mobile phones employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg. *Tests for SAR are conducted using standard operating positions accepted by the FCC with the phone transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the poser required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output.The highest SAR value for the model phone as reported to the FCC when tested for use at the ear is ____W/kg and when worn on the body, as described in this user guide, is _____ W/kg (Body-worn measurements differ among phone models, depending upon available accessories and FCC requirements.)While there may be differences between the SAR levels of various phones and at various positions, they all meet the government requirement.The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model phone is on file with the FCC and can be found under the Display Grant section of www.fcc.gov/oet/ea/fccid after searching on FCC ID: ________________.For body worn operation, this phone has been tested and meets the FCC RF exposure guidelines for use with an accessory that contains no metal and the positions the handset a minimum of 1.5 cm from the body. Use of other accessories may not ensure compliance with FCC RF exposure guidelines. If you do no t use a body-worn accessory and are not holding the phone at the ear, position the handset a minimum of 1.5 cm from your body when the phone is switched on.Preliminary Draft 1/19/11
1 - 5For European Community UsersHoneywell complies with Directive 2002/96/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 27 January 2003 on waste electrical and electronic equipment (WEEE).Waste Electrical and Electronic Equipment InformationThis product has required the extraction and use of natural resources for its production. It may contain hazardous substances that could impact health and the environment, if not properly disposed.In order to avoid the dissemination of those substances in our environment and to diminish the pressure on the natural resources, we encourage you to use the appropriate take-back systems for product disposal. Those systems will reuse or recycle most of the materials of the product you are disposing in a sound way.The crossed out wheeled bin symbol informs you that the product should not be disposed of along with municipal waste and invites you to use the appropriate separate take-back systems for product disposal.If you need more information on the collection, reuse, and recycling systems, please contact your local or regional waste administration.You may also contact your supplier for more information on the environmental performances of this product.Pacemakers, Hearing Aids and Other Electrically Powered DevicesMost manufacturers of medical devices adhere to the IEC 601-1-2 standard. This standard requires devices to operate properly in an EM Field with a strength of 3V/m over a frequency range of 26 to 1000MHz. The maximum allowable field strength emitted by the Dolphin terminal is 0.3V/m according to Subpart B of Part 1 of the FCC rules. Therefore, the RF from the Dolphin terminal has no effect on medical devices that meet the IEC specification. MicrowavesThe radio in the Dolphin RF terminal operates on the same frequency band as a microwave oven. Therefore, if you use a microwave within range of the Dolphin RF terminal you may notice performance degradation in your wireless network. However, both your microwave and your wireless network will continue to function. Preliminary Draft 1/19/11
1 - 6Preliminary Draft 1/19/11
2 - 12Getting StartedOut of the BoxVerify that the carton contains the following items: • Dolphin 99EX mobile computer (the terminal)• Main battery pack (i.e., standard 3.7V Li-poly or extended 3.7V Li-ion)• Quick Start GuideNote: If you ordered accessories for your terminals, verify that they are also included with the order.Be sure to keep the original packaging in the event that the Dolphin terminal should need to be returned for service. For details, see Product Service and Repair on page 19-1. Step 1. Install the Main Battery PackThe 99EX is shipped with the battery packaged separate from the unit. Follow the steps below to install the main battery. 1. Release the hook securing the hand strap to the back panel of the terminal near the speaker.2. Remove the battery door by lifting up the latches near the base of the battery door. 3. Insert the battery into the battery well.4. Replace the battery door. Apply pressure to engage the door latch. Note: The battery door must be installed prior to powering the unit.5. Reattach the hand strap.We recommend use of Honeywell Li-poly or Li-Ion battery packs. Use of any non-Honeywell battery may result in damage not covered by the warranty.    Step 2. Charge the Main and Backup BatteriesThe power supply for Dolphin terminals consists of two types of battery power: the main battery pack that is accessible from the back panel, and the backup battery that resides inside the terminal. The main battery powers the terminal. The internal backup battery charges off the main battery and maintains the application data stored in RAM memory for up to 30 minutes when the terminal’s main bat-tery pack is completely discharged or removed. Battery Error NotificationIf your terminal displays the following indicators, replace the main battery pack with a Honeywell Li-poly or Li-ion battery pack.•  appears in the Title bar at the top of the touch screen• The General Notification LED flashes red• A Notification appears on the Tile bar at the bottom of the touch screen2.3.!Preliminary Draft 1/19/11
2 - 2We recommend use of Honeywell peripherals, power cables, and power adapters. Use of any non-Honeywell peripherals, cables, or power adapters may cause damage not covered by the warranty.Before Initial UseTerminals are shipped with both batteries discharged of all power. The initial charging time for the main battery pack is 4.5 hours for the standard 3.7V battery or 6 hours for the extended 3.7V battery. Connect the terminal to one of the 99EX series charging peripherals to charge; see Peripherals for the 99EX on page 3-2. Honeywell recommends charging the Dolphin terminal for at least 24 hours prior to initial use to ensure the internal backup battery is fully charged. Using the Charging/Communication CablesStep 3. Boot the TerminalThe terminal begins booting as soon as power is applied. Do NOT press any keys or interrupt the boot process. When the boot process is complete, the Home screen appears, and the terminal is ready for use.Note: The Home screen appears several times during the boot process. To ensure the boot process is complete, wait several seconds before using the device. !RS232 ConnectorHost DevicePower CableOrUSB ConnectorCOMM CablePlugAdapterCable CupOrRS232, DEX A/V ConnectorDolphin 99EXDolphin 99EXPlugAdapterPower  CableClient DeviceCharging CupPreliminary Draft 1/19/11
2 - 3Step 4. Set the Time Zone, Time, and DateOn the Home screen, tap the line that displays the time and date.The Clock Settings screen appears.Tap the arrow to the right of the time zone to open the drop down menu.  Select the appropiate time zone from the menu. Set the correct time and date in the remaining fields and tap OK to save.Preliminary Draft 1/19/11
2 - 4Home ScreenAfter the Dolphin terminal initializes the first time, you see the Home screen. You can also display the Home screen anytime by tapping  . Title Bar The Title bar, located at the top of the screen, displays the active program, the status of various system functions, and the current time. Tapping on the title bar provides access to the Horizontal Scroll. The scroll provides access to additional programs and application screens. For additional information, see Horizontal Scroll on page 2-7. Note: Tapping the battery icon at the top of the screen does not open the Power applet with this version of Microsoft Windows Embedded Handheld. Windows Embedded HandheldIcons in the Title BarIndicator MeaningSynchronizing dataThe terminal could not synchronize data with the workstation via ActiveSync.New e-mail Text here indicates the active program. Icons here indicate the status of various system functions.Preliminary Draft 1/19/11
2 - 5New text messageNew voicemailNew instant messageVibrate onRinger offSpeakerphone onVoice call in progressCalls are forwardedCall on holdMissed callData call in progressA battery error has occurred. Replace the main battery pack with a Honeywell Li-poly or Li-ion battery pack.Battery is has a full chargeBattery has a high chargeBattery has a medium chargeBattery has a low chargeBattery has a very low charge and requires chargingTerminal is running on external power. If a battery pack is installed, the battery is charging in the background.The terminal is not connected to external power. A battery is installed, but is defective; specifically, its charge level cannot be measured.No SIM card is installed Active network connectionIcons in the Title BarIndicator MeaningPreliminary Draft 1/19/11
2 - 6No active network connectionGPRS availableGPRS connectingGPRS in use HSDPA availableHSDPA connectingHSDPA in useEDGE availableEDGE connectingEDGE in useUMTS availableUMTS connectingUMTS in useRadio is offThe radio is not connected to a network.The radio is connected. The bars indicate the signal strength.No radio signalThe terminal is searching for a signal.Wi-Fi is on, but device is not connectedWi-Fi data callPending alarmBluetoothIcons in the Title BarIndicator MeaningPreliminary Draft 1/19/11
2 - 7Horizontal ScrollThe Horizontal Scroll, located at the top of most application windows, provides access to additional application screens. You can flick left or right on the scroll or tap each label on the scroll, until you get to the desired screen. Tapping a label to the left or right of the center item brings new labels into view.Note:  Tap the Title bar to access the horizontal scroll if it is not visible on the screen.Tile BarThe Tile bar is located at the bottom of application windows.   Pop-Up MenusWith pop-up menus, you can quickly choose an action for a selected item. To access a pop-up menu, tap and hold the stylus on the item name of the action you want to perform. When the menu appears, lift the stylus, and tap the action you want to perform. Tap anywhere outside the menu to close the menu without performing an action.The content of the Horizontal scroll changes according to the open application.The icons change according to the open application.The Task tray displays icons for programs running in the background.The Tile bar displays icons you use to open and close screens, menues, and features. Preliminary Draft 1/19/11
2 - 8Selecting ProgramsTo see the programs loaded on your terminal, tap   to access the Start Menu.  To open a program, tap once on the program icon. To reposition an icon on the Start Menu, tap and hold the stylus on the icon, and then drag the icon to the desired position. File ExplorerYou can also use the File Explorer to find files and organize these files into folders. Tap  > File Explorer .Tap the Up button at the bottom of the screen to move up one level in the directory. You can move files in File Explorer by tapping and holding on the item you want to move, and then tap-ping Cut or Copy on popup menu. Preliminary Draft 1/19/11
2 - 9Navigate to the folder you want to move the file to, and then tap and hold a blank area of the window. Tap  Paste on the pop-up menu. Note: If there is no blank space available in the window, tap Menu on the command bar, navigate to the end of the menu using the down arrow, and then tap Edit > Paste.SearchThe Search feature helps you quickly locate information. Tap   > Search Phone . Enter the text you want to find, select a data type, and then tap Go to start the search. Select Larger than 64 KB in the Type drop-down field to quickly find information that is taking up storage space.Preliminary Draft 1/19/11
2 - 10Preliminary Draft 1/19/11
3 - 13Hardware OverviewStandard Configurations for the 99EXWLAN & WPAN• Microsoft Windows Embedded Handheld 6.5 Classic• OMAP3715 (1Ghz)• 256MB RAM X 1GB Flash• Four keyboard options• 3.7V Li-poly or extended 3.7V Li-ion rechargeable battery pack • Adaptus Imaging Technology:  N5603ER/SR/HD or N5600ER/SR/HD image engines• 802.11a/b/g/n and BluetoothWLAN, WPAN & Camera• Microsoft Windows Embedded Handheld 6.5 Classic• OMAP3715 (1Ghz)• 256MB RAM X 1GB Flash• Four keyboard options• 3.7V Li-poly or extended 3.7V Li-ion rechargeable battery pack • Adaptus Imaging Technology:  N5603ER/SR/HD or N5600ER/SR/HD image engines• 802.11a/b/g/n and Bluetooth• 3.1 megapixel auto control color cameraWLAN, WPAN, with GPS• Microsoft Windows Embedded Handheld 6.5 Classic• OMAP3715 (1Ghz)• 256MB RAM X 1GB Flash• Four keyboard options• 3.7V Li-poly or extended 3.7V Li-ion rechargeable battery pack • Adaptus Imaging Technology:  N5603ER/SR/HD or N5600ER/SR/HD image engines• 802.11a/b/g/n and Bluetooth•GPS• 3.1 megapixel auto control color cameraWLAN, WPAN, with GPS & Camera• Microsoft Windows Embedded Handheld 6.5 Classic• OMAP3715 (1Ghz)• 256MB RAM X 1GB Flash• Four keyboard options• 3.7V Li-poly or extended 3.7V Li-ion rechargeable battery pack • Adaptus Imaging Technology:  N5603ER/SR/HD or N5600ER/SR/HD image engines• 802.11a/b/g/n and Bluetooth•GPS• 3.1 megapixel auto control color cameraWLAN, WPAN, & WWAN• Microsoft Windows Embedded Handheld 6.5 Professional• OMAP3715 (1Ghz)• 256MB RAM X 1GB Flash• Four keyboard options• 3.7V Li-poly or extended 3.7V Li-ion rechargeable battery pack • Adaptus Imaging Technology:  N5603ER/SR/HD or N5600ER/SR/HD image engines• 802.11a/b/g/n, Bluetooth, and GSM/HSPA+ or GSM/CDMA WLAN, WPAN, & WWAN with GPS• Microsoft Windows Embedded Handheld 6.5 Professional• OMAP3715 (1Ghz)• 256MB RAM X 1GB Flash• Four keyboard options• 3.7V Li-poly or extended 3.7V Li-ion rechargeable battery pack  • Adaptus Imaging Technology:  N5603ER/SR/HD or N5600ER/SR/HD image engines• 802.11a/b/g/n, Bluetooth, and GSM/HSPA+ or GSM/CDMA •GPSPreliminary Draft 1/19/11
3 - 2WLAN, WPAN, WWAN with GPS & Camera• Microsoft Windows Embedded Handheld 6.5 Professional• OMAP3715 (1Ghz)• 256MB RAM X 1GB Flash• Four keyboard options• 3.7V Li-poly or extended 3.7V Li-ion rechargeable battery pack  • Adaptus Imaging Technology:  N5603ER/SR/HD or N5600ER/SR/HD image engines• 802.11a/b/g/n, Bluetooth, and GSM/HSPA+ or GSM/CDMA •GPS• 3.1 megapixel auto control color cameraSome configurations of the 99EX terminal are available with an external housing made of plastic that is specifically designed for the healthcare industry. For more information, see Healthcare Housing on page 3-12.Peripherals for the 99EXEach of the following items is sold separately to enhance the capabilities of your Dolphin terminal. Dolphin 99EX HomeBase™ DeviceThe Dolphin 99EX HomeBase device is a charging and communication cradle supporting both RS232 and USB communications, which enables the terminal to interface with the majority of PC-based enter-prise systems. This device also contains an auxiliary battery well that charges a spare Honeywell Li-poly or extended Li-ion battery. For more information, see Dolphin 99EX HomeBase Device on page 12-1.Dolphin 99EX Mobile Base™ DeviceThe Dolphin 99EX Mobile Base device is a charging and communication cradle designed specifically for in-premise and in-transit data collection applications. It features a flexible mounting bracket and a ciga-rette lighter adapter to adapt it to your environment. The serial connector supports RS232 communication and power out to peripheral devices, such as handheld scanners. The USB connector is a high-speed 2.0v compliant host port. Using a USB cable, you can connect the base to a peripheral device, such as a memory stick or printer.For more information, see Dolphin 99EX Mobile Base Device on page 14-1.Dolphin 99EX eBase™ DeviceThe Dolphin 99EX eBase device enables a single 99EX mobile computer to commuicate with a host device over USB and Ethernet network. This device also contains an auxiliary battery well that charges a spare Honeywell Li-poly or extended Li-ion battery. For more information, see Dolphin 99EX eBase Device on page 13-1.Preliminary Draft 1/19/11
3 - 3Dolphin 99EX Net Base™ DeviceThe Dolphin 99EX Net Base device enables up to four 99EX mobile computers to communicate with a host device over an Ethernet network. In addition, the Net Base provides a second RJ45 Ethernet port for connection to an additional device such as a printer, workstation, eBase, or another Net Base.For more information, see Dolphin 99EX Net Base Device on page 16-1.Dolphin 99EX Net Rack™ DeviceThe Dolphin 99EX Net Rack device enables up to thirty 99EX mobile computer to communicate with a host device over an Ethernet network. For more information, please consult the Dolphin 99EX Net Rack and Charge Rack User’s Guide.Dolphin 99EX ChargeBaseThe Dolphin 99EX ChargeBase is a 4-slot charging cradle that holds, powers, and charges terminals.For more information, see Dolphin 99EX ChargeBase Device on page 15-1. Dolphin 99EX ChargeRack™ DeviceThe Dolphin 99EX Charge Rack device is a 30-slot charging rack that holds, powers, and charges termi-nals.For more information,  please consult the Dolphin 99EX Net Rack and Charge Rack User’s Guide.Dolphin 99EX QuadCharger™ DeviceThe Dolphin 99EX QuadCharger device is a 4-slot charging station for 99EX standard Li-poly or extended Li-ion battery packs.For more information, see Dolphin 99EX QuadCharger Device on page 17-1. Accessories for the 99EXEach of the following items is sold separately to enhance your terminal’s capabilities.Note: When using accessories where the terminal is worn on the body, the terminal’s touch panel must face away from the body.Dolphin 99EX Mobile Charger The Dolphin 99EX Mobile Charger is a charging cable that connects the terminal directly to a 12 Volt DC power source, such as a cigarette lighter port inside a vehicle, eliminating the need for a cradle. Intelli-gent battery technology on-board the terminal ensures proper charging. The Dolphin 99EX Mobile Char-ger is an ideal low-cost charging solution for in-transit mobile applications.Preliminary Draft 1/19/11
3 - 4Dolphin 99EX Mobile MountThe Dolphin 99EX Mobile Mount, which holds a Dolphin terminal securely in place inside a vehicle, is an ideal, low-cost alternative to the Dolphin 99EX Mobile Base when communications is not required. When used in conjunction with the Dolphin 99EX Mobile Charger, the Dolphin 99EX Mobile Mount creates a complete mounting and charging solution for in-transit applications. The entire kit includes an adjustable vehicle mounting bracket.Communication/Charging CablesDolphin communication/charging cable kits are an all-in-one solution for mobile applications. Each cable kit powers the terminal, charges its main battery, and communicates with host or peripheral devices with-out the need for a cradle. Cable kits can support RS232 or USB communications and are available with U.K. or European power cords.Protective HolsterHolsters provide convenient storage for terminals and protect them from damage in mobile environ-ments. The holster features a front pocket that holds an extra battery, a side pocket to hold an extra sty-lus, and a belt loop to secure the holster to a belt.Protective EnclosureProtective enclosures help seal and protect terminals from damage while providing full access to all ter-minal parts and features. These enclosures feature a swivel clip on the back that enables you to secure the enclosure to a belt. Enclosures also come with an adjustable shoulder strap for added convenience.Stylus KitsThere are two stylus kits for each terminal type: one contains three styli and the other includes additional coiled tethers to secure the stylus to the terminal, which helps prevent loss. Battery Pack The rechargable battery pack (i.e., standard 3.7V, 3060mA Li-poly or extended 3.7V, 5000mA Li-ion) provides the main power for the terminal. For more information, see Batteries on page 3-13.Stylus for Dolphin 99EX with WWANStylus for Dolphin 99EX with WLANPreliminary Draft 1/19/11
3 - 5Front Panel: 99EXNote: The illustrations above show the 55-Key Full Alpha/Numberic Keyboard option. For a complete overview of the optional keyboards available for the 99EX, see Using the Keyboards on page 6-1. For a description of each callout, see Front Panel Features for the 99EX on page 3-5.Front Panel Features for the 99EXBlue Modifier KeySee Using the Modifier Keys on page 6-3.Front SpeakerThe front speaker is the receiver for handset voice calls. See GSM/HSPA+ Global Radio Dolphin Models on page 9-5.Power KeyTouch Panel DisplayNavigation KeysSCAN KeyRecessed KeyboardFront SpeakerI/O Connector General Notification LEDPower KeyTouch Panel DisplayNavigation KeysSCAN KeyRecessed KeyboardFront SpeakerI/O Connector General Notification LEDDolphin 99EX with WWANDolphin 99EX with WLANRed Modifier Key Blue Modifier KeyBlue Modifier KeyRed Modifier KeyMicrophoneMicrophoneCharge Indicator LEDCharge Indicator LEDPreliminary Draft 1/19/11
3 - 6General Notification LEDThe light emitting diode (LED) located above the top right corner of the LCD display flashes and illuminates during resets, scanning/imaging, and taking a picture. This LED can be programmed by various software applications.Charge Indicator LEDThe light emitting diode (LED) located above the top left corner of the LCD display illuminates when the Power Tools BattMon application is enabled and the device is on AC charge. For more information, consult the Dolphin Power Tools User’s Guide for Windows Embedded Handheld 6.5.MicrophoneThe integrated microphone that provides audio input for handset and speakerphone voice calls. See Voice Communication on page 9-5.Navigation KeysThe centrally located navigation keys enable you to move and position the cursor through software programs. The up and down arrows are programmed to perform specific functions when pressed in combination with the Blue and Red modifier keys. For more details, see Using the Navigation Keys on page 6-3.Power KeyThe power key   located at the lower left corner of the keypad puts the terminal in Suspend Mode or wakes the terminal from Suspend Mode. See Software/Operating System Upgrades on page 3-17.Recessed KeyboardThere are three keyboard options: a 34-key alpha/numeric keyboard, a 43-key alpha/numeric keyboard or a 55-key full alpha/numberic keyboard. For a complete overview of each keyboard, see Using the Keyboards on page 6-1.Red Modifier KeySee Using the Modifier Keys on page 6-3.SCAN KeyThe SCAN key is centrally located for easy access with the right or left hand. When pressed, the SCAN key activates the scanner/imager. The SCAN key also functions as a system wake-up control for the terminal.Touch Panel DisplayThe color 3.7 inch liquid crystal display (LCD) touch panel is covered with an industrial, protective lens for greater durability. The video graphic array (VGA) display resolution is480 X 640. The 262K color (18 bit RGB) LCD uses thin film transistor (TFT) technology. The touch panel backlight illuminates when the screen is touched, but not when the Backlight key is pressed. For more information, see Backlight on page 7-9.The touch panel can be activated by the stylus (included with the terminal) or a finger. For more information, see Using the Touch Panel on page 3-12.Preliminary Draft 1/19/11
3 - 7Back Panel: 99EX  For a description of each callout, see Back Panel Features for the 99EX below.Back Panel Features for the 99EXBattery DoorThe battery door secures the Li-ion or Li-poly battery pack in the terminal’s battery well. For more information, see Batteries on page 3-13. Color CameraThe 3.1-Megapixels Resolution (QXGA 2048H x 1536V) color camera provides easy piture capture with Automated Camera Control (ACC). Additional features include automated picture profiles and an Application Programming Interface (API).Image/Scan Engine Window Rear SpeakerIrDA PortStylus Slot Battery DoorFastener for the Stylus TetherFlashlight/Camera FlashColor CameraHand StrapDolphin 99EX with WWANDolphin 99EX with WLANImage/Scan Engine Window Stylus Slot Battery Door ReleaseRear SpeakerIrDA PortBattery DoorFlashlight/Camera Flash Color CameraHand StrapBattery Door ReleaseFastener for the Stylus TetherFastener for the Stylus TetherHand Strap HookHand Strap HookPreliminary Draft 1/19/11
3 - 8Fastener for the Stylus Tether Stylus tethers can be purchased separately to help prevent accidental loss when the stylus is not stored in the stylus slot.  A stylus tether is a coiled, elastic cord that tethers the stylus to the terminal.  Secure one end of the cord to the back panel of the terminal and the other end to the stylus.Flashlight/Camera FlashThe flashlight/camera flash is located on the back panel of the terminal. When used as a Flashlight, press the Blue key +   key to turn the flashlight on or off. When used as a Camera Flash with the terminal’s color camera, the flash is controlled by the camera application.Hand StrapThe 99EX comes with a removable, elastic hand strap.Image/Scan Engine WindowThe available image engines read and decode linear, stacked linear (e.g., PDF417), and 2D matrix bar code symbologies. The available image engines contain a laser aimer for greater accuracy. The laser apertures for the imaging engines’ laser aimers are contained behind this window. For more details, see Using the Scan Image Engine on page 4-1.Memory Card Socket and SIM Card SocketThe memory card socket provides the user with the option to expand the terminal’s memory capacity using industry-standard microSD or microSDHC memory interfaces. The expansion socket is located under the main battery in the battery well. When the protective SIM/memory card door, battery pack, and the battery door are properly installed, the memory card is sealed against moisture and particle intrusion, read/write data is stored securely, and the terminal’s environmental rating is preserved; see Installing a Memory Card on page 3-10.The card socket for the Subscriber Identity Module (SIM) is also located under the main battery in the battery well. See SIM Card Installation and SIM Card Requirements, on page 9-3 for additional information.Rear SpeakerThe integrated rear speaker sounds audio signals as you scan bar code labels and enter data. The integrated speaker also supports playback of wave and MP3 files, software mixer, and Speakerphone for WWAN/GSM audio.  The operating frequency range is 600-3000Hz at >90dB.Stylus SlotThe stylus is used to operate the touch panel. The back panel of the terminal features a storage slot to hold the stylus when not in use. The stylus features a special tip for added accuracy and ease of use.Stylus for Dolphin 99EX with WWANStylus for Dolphin 99EX with WLANPreliminary Draft 1/19/11
3 - 9Side Panels: 99EXThe left and the right side panels of the Dolphin contain different features.Left Side Left ButtonBy default, the Left Button triggers the scanner/imager. You can reassign the button to launch applications or execute commands. For additional information, see Changing Button Assignments on page 7-4.  IrDA PortThe IrDA port enables infrared communication. The maximum data transfer speed is 115 kbps. For more information about using this port, see Using the IrDA Port on page 8-2. Note: The infrared LED aperture is located behind the IrDA Port window.Right Side Right ButtonBy default, the Right Button triggers the scanner/imager. You can reassign the button to launch applications or execute commands. For additional information, see Changing Button Assignments on page 7-4.Volume Control ButtonPress the top or bottom of the volume button to raise or lower the volume of the active speaker.Left Button IrDA PortExtended Li-ion Battery Door Standard Li-poly Battery Door  Right Button Volume Control Button Lower Volume | Raise VolumeExtended Li-ion Battery Door  Standard Li-poly Battery DoorPreliminary Draft 1/19/11
3 - 10Installing a Memory Card1. Press the Power key  to put the terminal in Suspend Mode.2. Release the hand strap hook near the speaker on the back panel of the terminal.3. Remove the battery door and the battery.4. Remove the T6 torque screw securing the protective door closed.5. Lift up the lower left corner of the door to access the memory socket.6. Unlock  the access door to the memory socket by sliding the door toward the IrDA port side of the terminal. 7. Lift the door up to expose the socket.8. Slide the microSD or microSDHC card into the door of the socket.Note: Make sure the interface on the memory card is connected to the interface in the socket; align the notch on the card with the notch of the socket.9. Close and lock  the access door.10. Close the protective door over the memory socket. Install and tighten the T6 torque screw to secure the door closed.11. Install the battery and the battery door. Reattach the hand strap to the terminal.12. Press the Power key or SCAN key to wake the terminal. Installing a SIM CardSee Installing a SIM Card on page 9-4.Step 4Step 6Step 7Step 8Step 5Step 9Preliminary Draft 1/19/11
3 - 11Bottom Panel: 99EXNote: Signals referenced are for a DTE device.I/O ConnectorThe I/O connector powers the terminal, charges the main battery, and facilitates communication. All Dol-phin peripherals are designed to work exclusively with this connector.The I/O connector supports RS232 and high speed USB v2.0  communication. For RS232, the maxi-mum communication speed is 115.2 Kbps with seven baud rate settings. For USB, the communication speed is up to 480 Mbps. I/O Power OutThe I/O connector also provides power out (to peripheral devices) +5V at 500mA. This means that,with the proper cable, the terminal can power another device. By default, power out is disabled, but the 5V output may be enabled, see Five Volt Control on page 7-12. Pin Description1GND2GND3 USBC_DET4 USBC_D-5RTS6 USBC_D+7DTR8SPK9 Audio_GND10 MIC11 CTS12 USBH_D-13 5V_OUT14 USBH_D-15 TXD16 RXD17 VCC18 VCC246810 12 14 16 181357911 1315 17Preliminary Draft 1/19/11
3 - 12Using the Touch Panel Honeywell defines proper use of the terminal touch panel as using a screen protector and proper stylus. Screen protectors maintain the ongoing integrity (i.e., prevent scratching) of the touch panel, which is why their use is recommended for applications that require a high to medium level of interface with the touch panel, such as signature capture for proof of delivery. Honeywell advocates the use of screen protectors on all Dolphin devices. We recommend implementing a screen protector replacement program to ensure that screen protectors are replaced periodically when signs of damage/wear are noticeable. For general use, we recommend replacing the screen protector every thirty (30) days. However, replacement cycles vary according to the average level of touch panel use in your application.Replacement screen protectors can be purchased directly from Honeywell. Please contact a Honeywell sales associate for details.Honeywell also mandates use of a proper stylus, which is one that has a stylus tip radius of no less than 0.8 mm. Use of the Honeywell stylus included with the terminal is recommended at all times.Honeywell warranty policy covers wear on the touch panel for the first twelve (12) months if a screen pro-tector is applied and an approved stylus is used for the 12 month duration covered by the warranty.Installing a Screen ProtectorDolphin terminals ship with a screen protector already installed. You will need to replace the screen pro-tector at regular intervals.1. After the current screen protector has been removed from the touch panel, clean the touch panel thoroughly with a clean, non-abrasive, lint-free cloth. Make sure there is no debris on the touch panel.2. Align the exposed section of the protector with the bottom edge of the touch panel. Make sure that the screen protector is flush with each side of the touch panel. To reposition, lift up gently and reapply.3. Press the screen protector firmly and carefully across the surface of the touch panel as you peel away the backing.4. If necessary, smooth out any air pockets or bumps.Healthcare HousingSome configurations of the 99EX terminal are available with an external plastic housing that is designed to resist the effects of harsh chemicals in a healthcare environment. The plastic is crystalline in nature, which helps prevent chemicals from seeping through the housing.Important!  The following cleaning solutions have been tested to assure safe cleaning of your terminal’s disinfectant-ready housing. They are the only solutions approved for use with these terminals. Damage caused by the use of cleaners other than those listed below may not be covered by the warranty.• Sani-Cloth® HB wipes• Sani-Cloth® Plus wipes• Sani-Cloth® Bleach wipes• Super Sani-Cloth® wipesPreliminary Draft 1/19/11
3 - 13• Isopropyl Alcohol wipes (70%)• CaviWipes™•Virex® 256•409® Glass and Surface Cleaner•Windex® Blue• Gentle dish soap and waterBatteriesThere are three types of battery power: the main battery pack installed in the back panel, the backup battery located inside the terminal and the Real Time Clock (RTC) battery located inside the terminal. They are designed to work together to prevent data loss when the terminal is in use over long periods. All batteries must be completely charged before using a Dolphin terminal for the first time! Note: The RTC battery will preserve the Real Time Clock 60 days after the main battery and internal backup battery are fully depleted.Main Battery PackWe recommend use of Honeywell Li-ion or Li-poly battery packs. Use of any non-Honeywell battery may result in damage not covered by the warranty. The standard 3.7 V, 11.3 watt hour Li-poly or extended 3.7 V, 18.5 watt hour Li-ion battery pack is the pri-mary power source for the terminal. The Li-poly and Li-ion battery packs are designed to operate in a temperature range of -10° to 50°C (14° to 122°F). Note: Honeywell recommends placing the terminal in Software/Operating System Upgrades (see page 3-17) before removing the battery cover.Charging OptionsWhen the main battery pack is installed in the terminal, use one of the following peripherals:•Dolphin 99EX HomeBase Device (see page 12-1)•Dolphin 99EX eBase Device (see page 13-1)•Dolphin 99EX Mobile Base Device (see page 14-1)•Dolphin 99EX ChargeBase Device (see page 15-1)•Dolphin 99EX Net Base Device (see page 16-1)When the main battery pack is not installed in the terminal:• Place the battery pack in the Dolphin 99EX QuadCharger Device (see page 17-1)• Place the battery pack in the Auxiliary Battery Well of the Dolphin 99EX HomeBase Device (see page 12-2) or Dolphin 99EX eBase Device (see page 13-1). Charging TimeThe standard 3.7V Li-poly battery pack requires 4.5 hours to charge completely before initial use.The extended 3.7V Li-ion battery pack requires 6 hours to charge completely before initial use.Honeywell recommends charging the Dolphin terminal for at least 24 hours prior to initial use to ensure the internal backup battery is fully charged.!Preliminary Draft 1/19/11
3 - 14Battery Error NotificationIf your terminal displays the following indicators, replace the main battery pack with a Honeywell Li-poly or Li-ion battery pack.•  appears in the Title bar at the top of the touch screen.• The General Notification LED flashes red.• A Notification appears on the Tile bar at the bottom of the touch screen.Storing BatteriesTo maintain top performance from batteries, avoid storing batteries outside of the following temperature ranges:• 14°F to 113°F (-10°C to +45°C) for short term storage of less than one month• 32°F to 86°F (-0°C to +30°C) for long term storage   Do not store batteries in extremely high humidity. For prolonged storage, do not keep batteries stored in a charger that is connected to a power source. Guidelines for Battery Pack Use and DisposalThe following are general guidelines for the safe use and disposal of batteries:• We recommend use of Honeywell Li-ion or Li-poly battery packs. Use of any non-Honeywell battery may pose a personal hazard to the user.• Replace defective batteries immediately; using a defective battery could damage the Dolphin terminal.• Never throw a used battery in the trash. A battery contains heavy metals and should be recycled according to local guidelines. • Do not use a battery in any other manner outside its intended use in Dolphin terminals and peripherals. • Do not short-circuit a battery or throw it into a fire; it can explode and cause severe personal injury.• Excessive discharge damages a battery. Recharge the battery when your terminal indicates low battery power.• If you observe that the Honeywell battery supplied is physically damaged, please send it to Honeywell International Inc. or an authorized service center for inspection. Refer to the Product Service and Repair section of this guide.• Although your battery can be recharged many times, the battery life is limited. Replace it after the battery is unable to hold an adequate charge.• If you are not sure the battery or charger is working properly, send it to Honeywell International or an authorized service center for inspection.Internal Backup BatteryLocated inside the terminal, the backup battery is a 3.6 Volt nickel metal hydride (NiMH) battery. The internal backup battery prevents the terminal from being reset if you need to remove and replace the main battery pack. It retains RAM data. If the terminal is left without the main battery pack for more than 30 minutes, the internal backup battery needs to be recharged to function according to its specifications. Note: Data and programs stored in Flash memory are not lost even if the internal backup battery fails.Preliminary Draft 1/19/11
3 - 15ChargingThe internal backup batteries are powered by the main battery pack. Therefore, charging the internal backup batteries require that the main battery pack be installed in the terminal and the terminal be con-nected to a charging device.Note: Honeywell recommends placing the terminal in Software/Operating System Upgrades (see page 3-17) before removing the battery cover.The internal backup battery must be fully charged before using the terminal for the first time. Honeywell recommends charging the Dolphin terminal for at least 24 hours prior to initial use to ensure the internal backup battery is fully charged. After that, if the internal backup battery becomes fully discharged of power, it requires a minimum of 30 hours of charging time to function normally.Guidelines for UseFollow these guidelines to maximize the life of the internal backup battery:• Keep a charged Li-ion or Li-poly battery pack in the terminal; the backup battery prematurely discharges if there is not at least a partially charged battery in the terminal.• Keep the terminal connected to power when the terminal is not in use. Managing Battery Power Letting the backup battery become fully discharged causes the terminal to lose all data in RAM. Honey-well recommends, you keep a charged battery pack in the terminal at all times to help prevent data loss. The internal battery discharges prematurely if there is not at least a partially charged battery in the termi-nal. When you remove a battery pack, insert another charged battery pack in the terminal immediately. Default Critical and Low Battery PointsWhen the terminal is running on battery power (as opposed to external power), warnings are displayed when the battery reaches critical and low battery points. The warning points are determined by the fol-lowing registry entry: [HKEY_LOCAL_MACHINE\ControlPanel\Power] There are two DWORD values in this registry entry: MedState and LowState. The default values for these entries are as follows:MedState=25%This sets the Low Battery point to 25%. When the battery hits the percentage charge specified here, the user is notified.LowState=10%This sets the Critical Battery point to 10%. When the battery hits the percentage charge specified here, the user is notified.Note: Warnings do not appear when the terminal is on external power.Preliminary Draft 1/19/11
3 - 16Setting Critical and Low Battery PointsDevelopers can reset the battery parameters in the registry from 0 (no warning) to 99 (would nearly always warn). You can review and set these battery points in the RegEdit Power Tool. 1. Tap  > Power Tools > RegEdit. 2. Drill down to HKEY_LOCAL_MACHINE > ControlPanel > Power.3. Tap the Value Name to change the Value Data. You can reset the Value Data from 0 (no warning) to 99 (would nearly always warn). 4. Tap OK to save changes.For more information about the RegEdit Power Tool, refer to the Dolphin Power Tools User’s Guide avail-able for download at www.honeywellaidc.com.Checking Battery PowerTap    > Settings > System > Power.   For more information, see Power on page 7-16.Note: Tapping the battery icon at the top of the screen does not open the Power applet with this version of Microsoft Windows Embedded Handheld. Resetting the TerminalThere are three types of system resets: a soft reset, a hard reset and a factory reset. The soft and hard resets preserve all data stored in the file system. See Honeywell support for more information on how to perform a factory reset.Soft Reset (Warm Boot)A soft reset re-boots the device and preserves any objects created in RAM. You would perform a soft reset when:• the terminal fails to respond. Preliminary Draft 1/19/11
3 - 17• after installing some software applications.• after making changes to certain system settings, such as network cards.1. Press and hold the CTRL   + ENTER   keys for approximately 5 seconds. 2. The decode and scan LEDs flash for approximately three seconds as the terminal resets. 3. When the reset is complete, the Home screen displays.Hard Reset (Cold Boot)A hard reset re-boots the device and clears RAM data. Files in the user store are not affected unless you are performing a software upgrade. A hard reset erases all of the data stored in RAM memory!1. Press and hold the CTRL   + ESC   keys for approximately 5 seconds.2. The decode and scan LEDs light for approximately 3 seconds. 3. The terminal re-initializes; see Initialize the Mobile Computer on page 2-8.Software/Operating System UpgradesSoftware upgrades reset the device back to a factory state. Back up all user files to a storage card or external memory prior to performing a software upgrade. All files in the user store will be erased during an operating system upgrade. Data stored in the IPSM directory is preserved during an operating sys-tem upgrade.Suspend Mode The terminal goes into Suspend Mode automatically when the terminal is inactive for a programmed period of time. You can program this time on the Advance tab of the Power System Setting; see Power on page 7-16. To put the terminal into Suspend Mode manually, press the Power key   and the screen goes blank.To wake the terminal from Suspend Mode, press the Power key   or SCAN key  .Hardware MaintenanceWhen needed, clean the image engine window and the LCD display with a clean, non-abrasive, lint-free cloth. The terminal can be cleaned with a damp cloth. For additional information on hardware maintenance specific to the Dolphin Healthcare Housings, see page 3-12.ALTCTRLENT!ALTCTRLESCSCANPreliminary Draft 1/19/11
3 - 18Preliminary Draft 1/19/11
4 - 14Using the Scan Image EngineOverviewThe Dolphin terminal houses a compact image engine that instantly reads popular 1D and 2D bar codes and supports omni-directional aiming and decoding for greater flexibility in real-world settings. The image engine can also capture black and white digital images, such as signatures and pictures of dam-aged inventory. With the latest CMOS-based technology, the engine works like a digital camera and enables black and white digital image capture, signature capture, and reading of OCR characters.Angled ImagingAll imagers are installed at a 25 degree downward-facing angle for enhanced comfort and maneuverabil-ity while scanning.Laser SafetySee Laser Safety on page 1-1.LED SafetySee LED Safety on page 1-2.Image Engine Specifications N5603 Beam Divergence AngleEngines 1D 2D Image Capture Aiming Pattern Omni-Directional AimingN5603SR/ER/HD YYY N5603 Red High-Vis Aiming Pattern (page 4-5)See Laser Safety on page 1-1.Y N5600SR/ER/HD YYY Capturing Images (page 4-6) YEngines Horizontal Beam Divergence Angle (degrees) Vertical Beam Divergence Angle (degrees)N5603SR/HD 18.1 14.3 N5603ER 13.1 9.9 Preliminary Draft 1/19/11
4 - 2Depth of FieldThe depth of field measurements used the following parameters:• Distances are measured from the front of the engine.• +23°C (+73°F), 0 lux• Photographic quality codesFocus N5603/N5600 High Density (HD) N5603/N5600Standard Range (SR) N5603/N5600 Extended Range (ER)Symbology Distance (in/cm) Delta(in/cm) Distance (in/cm) Delta(in/cm) Distance (in/cm) Delta(in/cm)Near Far Near Far Near Far3 mil C39/128 2.1 (5.3) 3.4(8.6) 1.3  (3.3) ---- - -5 mil C39/128 1.3 (3.3) 4.8 (12.2) 3.5 (8.9) 2.7 (6.9) 6.2 (15.7) 3.5 (8.9) 5.8 (14.7) 9.0 (22.9) 3.2 (8.1)7.5 mil C39/128 1.3 (3.3) 5.7 (14.5) 4.4 (11.2) 2.3 (5.8) 9.4 (23.9) 7.1 (18) 4.0 (10.2) 12.8 (32.5) 8.8 (22.4)10 mil C39/128 1.3 (3.3) 5.6 (14.2) 4.3 (10.9) 1.3 (3.3) 13.5 (34.3) 12.2 (31) 2.7 (6.9) 17.6 (44.7) 14.9 (37.8)15 mil C39/128 1.3 (3.3) 7.8 (19.8) 6.5 (16.5) 1.3 (3.3) 19.5 (49.5) 18.2 (46.2) 1.9 (4.8) 21.4 (54.4) 19.5 (49.5)20 mil C39/128 2.1 (5.3) 9.4 (23.9) 7.3 (18.5) 2.0 (5.1) 20.1 (51.1) 18.1 (46) 2.8 (7.1) 26.5 (67.3) 23.7 (60.2)100% UPC 1.9 (4.8) 7.1 (18) 5.2 (13.2) 1.8 (4.6) 17.0 (43.2) 15.2 (38.6) 2.7 (6.9) 20.9 (53.1) 18.2 (46.2)5 mil PDF417 1.3 (3.3) 4.9 (12.4) 3.6 (9.1) 2.2 (5.6) 5.8 (14.7) 3.6 (9.1) 6.1 (15.5) 7.9 (20.1) 1.8 (4.6)6.7 mil PDF417 1.3 (3.3) 4.9 (12.4) 3.6 (9.1) 1.9 (4.8) 6.6 (16.8) 4.7 (11.9) 4.6 (11.7) 9.9 (25.1) 5.3 (13.5)10 mil PDF417 1.6 (4.1) 6.3 (16) 4.7 (11.9) 1.9 (4.8) 11.3 (28.7) 9.4 (23.9) 2.4 (6.1) 16.0 (40.6) 13.6 (34.5) 5 mil MicroPDF 1.7 (4.3) 3.3 (8.4) 1.6 (4.1) ---- - -5 mil Data Matrix 1.6 (4.1) 3.0 (7.6) 1.4 (3.6) ---- - -10 mil Data Matrix/Aztec 1.3 (3.3) 5.3 (13.5) 4.0 (10.2) 1.9 (4.8) 8.2 (20.8) 6.3 (16) 5.4 (13.7) 11.3 (28.7) 5.9 (15)20 mil Data Matrix 1.9 (4.8) 8.0 (20.3) 6.1 (15.5) 1.9 (4.8) 16.0 (40.6) 14.1 (35.8) 2.4 (6.1) 19.9 (50.5) 17.5 (44.5)Preliminary Draft 1/19/11
4 - 3Supported Bar Code Symbologies 10 mil QR 3.3 (8.4) 5.0 (12.7) 3.5 (8.9) 2.1 (5.3) 7.2 (18.3) 5.1 (13) 4.1 (10.4) 10.6 (26.9) 6.5 (16.5)20 mil QR 2.0 (5.1) 8.0 (20.3) 6.0 (15.2) 1.9 (4.8) 15.8 (40.1) 13.9 (35.3) 2.0 (5.1) 19.6 (49.8) 17.6 (44.7)32 mil Maxicode 2.2 (5.6) 8.8 (22.4) 6.6 (16.8) 2.1 (5.3) 19.3 (49) 17.1 (43.4) 3.7 (9.4) 23.2 (58.9) 19.5 (49.5) Symbology Type Symbology Name1D Symbologies Codabar Code 3 of 9Code 11Code 32 Pharmaceutical (PARAF)Code 93 Code 128 EAN with Add-OnEAN with Extended Coupon CodeEAN-8 EAN-13 GS1-128GS1 DatabarInterleaved 2 or 5 ISBT 128Matrix 2 of 5MSIPlessey PosiCode Straight 2 of 5 IATAStraight 2 of 5 IndustrialTelepen Trioptic CodeUPCUPC-AUPC-E2D Symbologies  AztecCodablockCode 16KCode 49CompositeData MatrixGS1 DatabarMaxiCodeMicro PDFOCRPDF417QR CodeComposite Codes  Aztec MesaCodablock FEAN·UCCGS1 Databar-14OCR  OCR US Money FontMICR (E 13 B) and SEMI FontOCR-A OCR-BPostal Codes  Postnet and most international 4-state codes Australian PostBritish PostCanadian PostChina Post Japanese PostKIX (Netherlands) Post Korea PostPlanet CodePreliminary Draft 1/19/11
4 - 4DecodingThe terminal supports two types of image decoding for use in various bar code reading and imaging applications: full-area imaging and Advanced Linear Decoding (ALD).Full-Area ImagingFull-area imaging provides omni-directional reading of linear and non-linear 1D and 2D bar codes, OCR, signature capture, and picture taking. When reading all bar code types using full-area imaging, a positive read can be obtained from many positions; see Aiming Options on page 4-4. To achieve the best read, the aiming beam should be centered horizontally across the bar code. ALDALD provides fast reading of linear and stacked linear bar codes. To achieve a positive read when read-ing linear 1D and PDF417 bar codes, the green aiming beam should be centered horizontally across the bar code. When ALD is enabled, the reader does not read matrix or postal codes.To Decode a Bar CodeThe aiming beam should be oriented in line with the bar code to achieve optimal decoding. A range of 4-10 inches (10-25 cm) from the bar code is recommended.1. Tap    > Demos > Scan Demo  . 2. Point the Dolphin terminal at the bar code.3. Project the aiming beam or pattern by pressing and holding the SCAN key  . 4. The scan LED lights red. 5. Center the aiming beam over the bar code; see Aiming Options on page 4-4.6. When the bar code is successfully decoded, the decode LED lights green and the terminal beeps.7. The bar code information is entered into the application in use.Aiming Options The aiming beams are smaller when the terminal is held closer to the code and larger when it is farther from the code. Symbologies with smaller bars or elements (mil size) should be read closer to the unit whereas symbologies with larger bars or elements (mil size) should be read farther from the unit.SCANPreliminary Draft 1/19/11
4 - 5N5603 Red High-Vis Aiming PatternIf your Dolphin terminal is configured with a 5603 imager, high-vis aimers frame the bar code for more intuitive aiming. See Laser Safety on page 1-1.N5600 Green Aiming Beam Linear Bar Code2D Matrix SymbolPreliminary Draft 1/19/11
4 - 6Capturing ImagesThe image-capture process is an intuitive, split-second operation for experienced users. By following the basic guidelines, new users can easily develop their own technique and, with practice, quickly learn to adapt it to different application environments.Image PreviewWhen the imaging process is initiated, the touch screen displays a preview of the object. This is a live video image of what the imager is currently viewing. The live video image has a slightly degraded appearance compared to the captured image. This is normal.Scan KeyOn all 99EX terminals, the SCAN key captures images.File FormatsFile formats supported for image storage include Bitmap (BMP), JPEG (JPG) and Portable Network Graphics (PNG). The default file format for images is a grayscale JPG. CompressionDigital images have a maximum image size of 640 x 480 pixels and may have up to a 256 grayscale image definition. The image quality and related file size are determined by the data compression method used by the soft-ware application used to take images. The average size of the image file is approximately 4–8K. How-ever, the size of the image depends on the content of the image - the more complex the content, the larger the file size. Taking an ImageThe following steps are basic guidelines for taking images:1. Tap  > Demos > Imaging Demo .2. Point the Dolphin terminal at the object.3. To preview the image, press and hold the SCAN key  . 4. The touch screen displays a preview of the object, and the decode and scan LEDs light red.5. Adjust the terminal’s position until the object appears on the screen the way you want it to appear in the image.6. Hold the terminal still and release the SCAN key. The scan and decode LEDs flash red, the screen flashes, and the captured image appears on the screen. SCANPreliminary Draft 1/19/11
4 - 77. Unless otherwise specified by the application in use, the image is saved to the \My Device\My Documents folder. Enabling the AimerIf your Dolphin terminal is configured with the 5300 imager, you can enable the aiming pattern for imag-ing in the Imaging Demo. For details about the aimer, see Capturing Images on page 4-6.1. Tap  > Demos > Imaging Demo > Setup menu > Aimer.2. The aiming pattern is now enabled for imaging.Uploading ImagesImage files can be uploaded to a host workstation via Microsoft ActiveSync and a Dolphin communica-tion peripheral or your wireless radio connection.Note: You can download the most current version of ActiveSync from www.microsoft.com. Note: Visit the Microsoft Windows 7 website for information on how to sync your music, pictures, contacts and calendars using Device Stage.Note: Visit the Microsoft Windows Vista website for information on how to sync your music, pictures, contacts and calendars using Windows Mobile Device Center.We recommend use of Honeywell peripherals, power cables, and power adapters. Use of any non-Honeywell peripherals, cables, or power adapters may cause damage not covered by the warranty.!Preliminary Draft 1/19/11
4 - 8Preliminary Draft 1/19/11
5 - 15Using the Color CameraOverviewDolphin 99EX terminals equipped with a 3.1-Megapixels Resolution color camera with Automated Cam-era Control (ACC), and an Application Programming Interface (API) provide easy integration of color pic-ture and video capture into business applications. The camera lens and camera flash are located on the back panel of the terminal.Taking a picture using the Camera Demo tool1. Tap   > Demos  > Camera Demo .2. Adjust the camera settings using the icon menu at the top of the display screen.3. Point the terminal's camera lens at the object you want to capture. The camera lens is located on the back panel of the terminal.4. Center the object in the touch screen display. 5. Press the ENT key   or tap Snap .  The terminal’s red LED illuminates during picture capture.Note: Tap the green arrow   to review or edit your pictures.Tap the green box   to exit the picture review/edit screen.Camera Lens Flashlight/Camera FlashENTPreliminary Draft 1/19/11
5 - 2OptionsTap  Options > Camera.The Camera Options menu appears.  There are five tabs of configurable options accessible from the Camera Options menu.Taking a picture using the Windows Embedded Handheld 6.5 Camera tool1. Tap   > Pictures & Videos  > Camera 2. Point the terminal's camera lens at the object you want to capture. The camera lens is located on the back panel of the terminal.3. Center the object in the touch screen display. 4. Press the ENT key  . 5. The touch screen displays the captured photo. Profile TabDisplay TabCapture Tab Caption Tab File TabThe profile tab allows you to customize your camera settings, or chose from several predefined profiles designed to provide the best picture quality for common tasks.ENTPreliminary Draft 1/19/11
5 - 3MenuTap  Menu on the Command Bar to adjust the camera settings, switch to video mode, and access addi-tional camera options.OptionsTap  Menu > Options. The Options menu contains four screens:Recording Video1. Tap   > Pictures & Videos > Camera > Menu > Video2. Point the terminal's camera lens at the object you want to capture. 3. Press the ENT key   to start recording. 4. Tap Stop or press ENT to stop recording.Item DescriptionsVideo Activate Video ModeMode Normal Mode, Burst Mode, Timer ModeResolution Set picture resolution (i.e., 320 x 240, 640 x 480, 800 x 600, 1600 x 1200)Zoom Set zoom (i.e., x1, x2, x3, and x4)Flash Camera Flash On or Camera Flash OffFocus Focus On, Focus Off, Focus on Trigger, or Fixed-FocusBrightness Set the brightness setting from +2.0 EV to -2.0 EV in .5 EV incrementsFull Screen Switch to full screen modeOptions Set General, Slide Show, Camera, and Video optionsFocus Manual focus adjustmentGeneral Tab Slide Show Tab Camera Tab Video TabENTPreliminary Draft 1/19/11
5 - 4Preliminary Draft 1/19/11
6 - 16Using the KeyboardsAvailable KeyboardsThere are four keyboard options in the 99EX series:All Keyboards Contain the Following:• Backlit for easy viewing in various lighting conditions. • Centrally located Scan key for both right- and left-hand operation. • Color-coding so you can clearly see the most common keyboard combinations.• Function, navigation, and modifier keys. Keyboard CombinationsSee 34-Key Alpha/Numeric Keyboard Combinations on page 6-6.See 34-Key Numeric (Calculator) Keyboard Combinations on page 6-9.See 43-Key Keyboard Combinations on page 6-12.See 55-Key Keyboard Combinations on page 6-14.Common ButtonsSee Using the Function Keys on page 6-2.See Using the Modifier Keys on page 6-3.See Using the Navigation Keys on page 6-3.ALTCTRLNUMAB C D EF G H I JK L M N OP Q R S TUVWX YZ1+@#*F1 F2 F3 F4 F5F6 F7 F8 F9 F10F15F14F13F12F11F17 F18 F19 F20F16F21 F22 F23 F24 F2523456789.0SFT SPBKSP,SCANVOL PGTABESCSEND ENDENT☼ALTCTRLA1234567890BCDEFGH IJKL MNOPQRSTUV WX YZSFT#!?;@$&—~`.,*F6 F7 F8 F9 F10F15F14F13F12F11F17 F18 F19 F20F16F21 F22 F23 F24 F25BKSPSPDEL+-()=:‘SCANVOL PGTABESCENT☼F1 F2 F3 F4 F51SCANVOLPGTABESCSEND ENDENT☼34567.+-/\;— :0,#*@89DEFGHI JKL MNOPQRS TU V WXYZF1F5 F2F6 F3F7 F4F8SFT SP BKSP DELALTCTRL ALPHA2ABC34-Key Alpha/Numeric Keyboard 34-Key Numeric (Calculator) Keyboard 43-Key Alpha/Numeric Keyboard 55-Key Full Alpha/Numeric Keyboard 7SCANVOL PGTABESCSEND ENDENT☼94561.+-/\;:— 0,#@*23F1F5 F2F6 F3F7 F4F8SFT SP BKSP DELALTCTRL ALPHA8DEFGHI JKL MNOPQRS TU V WXYZABCPreliminary Draft 1/19/11
6 - 2Using the Function KeysName Key FunctionBacklight Turns the keyboard backlight on and off. Flashlight  & Turns the flashlight on and off. The flashlight is located on the back panel of the terminal.Backspace (BKSP) Moves the cursor back one space each time the key is pressed. If you are typing text, it deletes the previous character each time it is pressed.Delete (DEL) Deletes the next character each time the key is pressed. This key only appears on the 34-key and 55-key kepad options.Enter (ENT) Confirms data entry.Escape (ESC) Cancels the current action.Power Key Puts the terminal in and wakes the terminal from Suspend Mode; see Software/Operating System Upgrades on page 3-17.SCAN Key  Activates the scan and “wakes” the terminal from Sleep Mode. Its position allows convenient one-handed image-taking and/or bar code decoding. Space (SP) Moves the cursor one space.Tab Moves the cursor to the next tab stop or the next control (on a form). ☼Blue☼BKSP:BKSPBKSP34-Key43-Key55-Key— DELDEL34-Key55-KeyENTESCSCAN;SPSPSP34-Key43-Key55-KeyTABPreliminary Draft 1/19/11
6 - 3Using the Modifier Keys Using the Navigation KeysLocated in the center of each keyboard for easy access with either hand, the navigation keys navigate the cursor through application screens. Name Key FunctionALPHA The ALPHA key enables you to toggle between the alpha and numeric modes. See ALPHA Key on page 6-5.Blue and Red  The blue and red keys are used in combination with other keys to type special characters and perform system functions. Each key modifies only the next key pressed.Each keyboard is color-coded to indicate the character typed or function performed when specific keys are pressed immediately after the blue or red modifier key. Number Lock (NUM) The Number Lock key enables you to toggle between the alpha and numeric modes. See Number Lock (NUM) Key on page 6-11.Shift (SFT) The shift key modifies only the next key pressed; it must be pressed before each key you wish to modify. Shift toggles the keyboard between uppercase alphabet mode and lowercase alphabet mode. Press the shift key twice to toggle Caps Lock on and off. When Caps Lock is toggled on, characters are uppercase; when toggled off, characters are lowercase. Key Function Moves the cursor up one row or line.Moves the cursor down one row or line. &  Raises the volume. &  Lowers the volume.  &  Moves the cursor up one page.ALPHA34-KeyBlueRedNUM43-KeySFTSFTSFTSFT34-Key43-Key55-KeyVOLPGBlueVOLBluePGRedPGVOLPreliminary Draft 1/19/11
6 - 4Note: Additional functionality varies according to the application in use. &  Moves the cursor down one page.Moves the cursor one character to the right.Moves the cursor one character to the left.Key FunctionRedPGPreliminary Draft 1/19/11
6 - 534-Key Alpha/Numeric KeyboardALPHA Key The ALPHA lock key enables you to toggle between the alpha and numeric keyboard modes. On the 34-Key Keyboard, numeric mode is the default. Press the ALPHA key once to switch to ALPHA lock mode. Press the ALPHA key again to exit the ALPHA lock mode.1SCANVOL PGTABESCSEND ENDENT☼34567.+-/\;:— 0,#*@89DEFGHI JKL MNOPQRS TUV WXYZF1F5 F2F6 F3F7 F4F8SFT SP BKSP DELALTCTRL ALPHA2ABCBacklight\Flashlight keySCAN keyALPHA Mode keysEnter keyTab keyEscape keyPower key ALPHA keyLeft Navigation\SEND key Right Navigation\END keyRed key Blue keyCTRL\ALT keyDelete keyBackspace keySpace keyShift keyDown Navigation keyUp Navigation keyPreliminary Draft 1/19/11
6 - 634-Key Alpha/Numeric Keyboard CombinationsKey NUM (Default) Shift-NUM ALPHA Shift-ALPHA Blue Red ESC EscapeLeft Left Left Left Left Send (Phone) LeftScan ScanRight Right Right Right Right End (Phone) RightBacklight Toggles Keyboard Backlight On/Off Toggles Flashlight On/OffToggles Keyboard Backlight On/OffTAB Tab Tab Tab Tab Tab TabUp Up Up Up Up Volume Up PriorDown Down Down Down Down Volume Down NextEnter Return11!22@a,b,cA,B,C33 # d,e,f D,E,F44 $ g,h,i G,H,I55 % j,k,l J,K,L66^m,n,oM,N,O77& (ampersand) p,q,r,s P,Q,R,S88 * (multiply) t,u,v T,U,V99 ( w,x,y,z W,X,Y,ZPeriod . (period) > . (period) > * (multiply)00) @Comma , (comma) < , (comma) < #Preliminary Draft 1/19/11
6 - 7F1 F1 F1 F1 F1 + F5F2 F2 F2 F2 F2 - F6F3 F3 F3 F3 F3 / F7F4 F4 F4 F4 F4 \ F8SFT Shift Shift Shift ShiftSP Space Space Space Space ; SpaceBKSP Backspace Backspace Backspace Backspace : BackspaceDEL Delete Delete Delete Delete Underscore DeletePower Off/OnCTRL Control Control MenuBlue Blue Blue BlueRed Red Red RedALPHA Toggles between ALPHA mode and NUM Lock modeKey NUM (Default) Shift-NUM ALPHA Shift-ALPHA Blue Red Preliminary Draft 1/19/11
6 - 834-Key Numeric (Calculator) KeyboardALPHA Key The ALPHA lock key enables you to toggle between the alpha and numeric keyboard modes. On the 34-Key Keyboard, numeric mode is the default. Press the ALPHA key once to switch to ALPHA lock mode. Press the ALPHA key again to exit the ALPHA lock mode.7SCANVOL PGTABESCSEND ENDENT☼94561.+-/\;:— 0,#@*23F1F5 F2F6 F3F7 F4F8SFT SP BKSP DELALTCTRL ALPHA8DEFGHI JKL MNOPQRS TUV WXYZABCBacklight\Flashlight keySCAN keyEnter keyTab keyEscape keyPower key ALPHA keyLeft Navigation\SEND key Right Navigation\END keyRed key Blue keyCTRL\ALT keyDelete keyBackspace keySpace keyShift keyDown Navigation keyUp Navigation keyPreliminary Draft 1/19/11
6 - 934-Key Numeric (Calculator) Keyboard CombinationsKey NUM (Default) Shift-NUM ALPHA Shift-ALPHA Blue Red ESC EscapeLeft Left Left Left Left Send (Phone) LeftScan ScanRight Right Right Right Right End (Phone) RightBacklight Toggles Keyboard Backlight On/Off Toggles Flashlight On/OffToggles Keyboard Backlight On/OffTAB Tab Tab Tab Tab Tab TabUp Up Up Up Up Volume Up PriorDown Down Down Down Down Volume Down NextEnter Return11!22@a,b,cA,B,C33 # d,e,f D,E,F44 $ g,h,i G,H,I55 % j,k,l J,K,L66^m,n,oM,N,O77& (ampersand) p,q,r,s P,Q,R,S88 * (multiply) t,u,v T,U,V99 ( w,x,y,z W,X,Y,ZPeriod . (period) > . (period) > * (multiply)00) @Comma , (comma) < , (comma) < #Preliminary Draft 1/19/11
6 - 10F1 F1 F1 F1 F1 + F5F2 F2 F2 F2 F2 - F6F3 F3 F3 F3 F3 / F7F4 F4 F4 F4 F4 \ F8SFT Shift Shift Shift ShiftSP Space Space Space Space ; SpaceBKSP Backspace Backspace Backspace Backspace : BackspaceDEL Delete Delete Delete Delete Underscore DeletePower Off/OnCTRL Control Control MenuBlue Blue Blue BlueRed Red Red RedALPHA Toggles between ALPHA mode and NUM Lock modeKey NUM (Default) Shift-NUM ALPHA Shift-ALPHA Blue Red Preliminary Draft 1/19/11
6 - 1143-Key Alpha/Numeric KeyboardNumber Lock (NUM) Key The Number Lock key enables you to toggle between the alpha and numeric keyboard modes. On the 43-key keyboard, alpha mode is the default. Press the NUM key once to switch to NUM lock mode. Press the NUM key again to exit the NUM lock mode.ALTCTRL NUMAB C D EF G H I JK L M N OP Q R S TUVWX YZ1+@#*F1 F2 F3 F4 F5F6 F7 F8 F9 F10F15F14F13F12F11F17 F18 F19 F20F16F21 F22 F23 F24 F2523456789.0SFT SPBKSP,SCANVOL PGTABESCSEND ENDENT☼Backlight\Flashlight keySCAN keyNumber (NUM) Mode keysEnter keyTab keyEscape keyPower key Number (NUM) Lock keyLeft Navigation\SEND key Right Navigation\END keyRed keyCTRL\ALT keyBackspace keySpace keyShift keyDown Navigation keyUp Navigation keyBlue keyPreliminary Draft 1/19/11
6 - 1243-Key Keyboard CombinationsKey ALPHA (Default) Shift-ALPHA NUM Shift-NUM Blue RedESC EscapeLeft Left Left Left Left Send (Phone) LeftScan ScanRight Right Right Right Right End(Phone) RightBacklight Toggles Keyboard Backlight On/Off Toggles Flashlight On/OffToggles Keyboard Backlight On/OffTAB TabUp Up Up Up Up Volume Up(Phone) PriorDown Down Down Down Down Volume Down (Phone)NextEnter ReturnAaA+ (add) F1BbB1! F2CcC2@ F3DdD3# F4EeEF5FfF- (subtract) F6GgG4$ F7HhH5% F8IiI6^ F9JjJF10KkK@@F11Preliminary Draft 1/19/11
6 - 13LlL7& F12MmM8 * (multiply) F13NnN9( F14OoOF15PpP=F16QqQ. (period) > * (multiply) F17RrR0) F18SsS, (comma) < # F19TtTF20UuU;F21VvV:F22WwW_ (underscore) F23XxX/F24YyY\F25SFT Shift ShiftSP SpaceBKSP BackspaceZzZPower Off/OnCTRL Control Control MenuBlue Blue Blue BlueRed Red Red RedNUM Toggles between NUM lock mode and ALPHA modeKey ALPHA (Default) Shift-ALPHA NUM Shift-NUM Blue RedPreliminary Draft 1/19/11
6 - 1455-Key Full Alpha/Numeric Keyboard55-Key Keyboard CombinationsKey Normal Shift Blue RedESC EscapeLeft Left Left Send(Phone) LeftScan ScanRight Right Right End(Phone) RightALTCTRLA1234567890BCDEFGH IJKL MNOPQRSTUVWX YZSFT#!?;@$&—~`.,*F6 F7 F8 F9 F10F15F14F13F12F11F17 F18 F19 F20F16F21 F22 F23 F24 F25BKSPSPDEL+-()=:‘SCANVOL PGTABESCENT☼F1 F2 F3 F4 F5Backlight\Flashlight keySCAN keyEnter keyTab keyEscape keyPower keyDown Navigation keyUp Navigation keyLeft Navigation\SEND key Right Navigation\END keyRed key Blue keyCTRL\ALT keyDelete keyBackspace keySpace keyShift keyPreliminary Draft 1/19/11
6 - 15Backlight Toggle Keyboard Backlight On/Off Toggle Flashlight On/OffToggle Keyboard Backlight On/OffTAB TabUp Up Up Volume Up PriorDown Down Down Volume Down NextEnter ReturnSP Space11!1122@223#33BKSP Backspace44$4455%5566^66DEL Delete77&7788*8899(99SHIFT ShiftPeriod . (period) > * (multiply) . (period)00)00Comma , (comma) < _ (underscore) , (comma)AaA+ (add) F1BbB- (subtract) F2CcC(F3Key Normal Shift Blue RedPreliminary Draft 1/19/11
6 - 16DdD)F4EeE=F5FfF!F6GgG@F7HhH$F8IiI&F9JjJ_  (underscore) F10KkK?F11LlL\F12MmM/F13NnN~F14OoO'F15PpP;F16QqQ: F17RrR‘ (back quote) F18SsS“ (quotes) F19TtT" (back quotes) F20UuUu or U F21VvVv or V F22WwWw or W F23XxXx or X F24YyYy or Y F25Power Off/OnCTRL Control MenuBlue BlueKey Normal Shift Blue RedPreliminary Draft 1/19/11
6 - 17Red RedZzZz or Z z or ZKey Normal Shift Blue RedPreliminary Draft 1/19/11
6 - 18Preliminary Draft 1/19/11
7 - 17System SettingsOverviewCustomized settings are available on the System Settings menu. Tap   > Settings and the settings screen opens. Icon DescriptionBluetooth Configures the Bluetooth radio. See Working with the Bluetooth Radio on page 10-1.Clock & Alarms Set the system clock, date, time and schedule alarms. See Clock & Alarms on page 7-2.Lock Password protect the terminal to limit access to the terminal.Sounds & Notifications Set the sound volume, enable or disable sounds for specific actions, set sound parameters for system notifications and enable or disable vibrator notification. Home Customize the look and the information displayed on the Home screen.Connections Establishes network connections settings. See Connections Menu on page 8-1.Personal Customizes buttons, and set SIP options. See Personal Menu on page 7-3.Preliminary Draft 1/19/11
7 - 2Clock & AlarmsThe Clock & Alarms settings can be accessed from the Home screen or the Settings Menu.1. On the Home screen, tap the line that displays the time and date ORTap  > Settings > Clock & Alarms,2. The Clock Settings screen appears. This setting sets the system clock. All scheduled items run according to this setting. Tap the arrow to the right of the time zone to open the drop down menu.  Select the appropiate time zone from the menu. Set the correct time and date in the remaining fields and tap OK to save.System Adjusts system settings. See System Menu on page 7-7.Microsoft My Phone Synchronizes your phone’s contacts, calendar, tasks, text messages, music, photos, videos, and other documents with your My Phone account at http:\\myphone.microsoft.com.Icon DescriptionPreliminary Draft 1/19/11
7 - 3Personal MenuTo access the Personal Menu, tap   > Settings > Personal. The screen opens displaying the Per-sonal Menu.ButtonsThe Buttons setting programs certain keyboard buttons to launch applications or execute commands. Enable HotKeysDefault Buttons setting assignments are inactive until you enable the HotKeys Power Tool. Tap  > Power Tools and tap the HotKeys icon  once. HotKeys is enabled, and the button assignments in the Buttons setting are active.For more information about the HotKeys Power Tool, refer to the Dolphin Power Tools User’s Guide, which is available for download from the web at www.honeywellaidc.com.Icon DescriptionButtons Program the side buttons to perform specific tasks. See Buttons on page 7-3.Owner Information Enter your contact information. This information will appear on the Home screen.Phone When the GSM radio is enabled, tap this icon to set up user parameters. See Setup Options on page 9-7.Preliminary Draft 1/19/11
7 - 4Changing Button Assignments1. After HotKeys is enabled, tap   > Settings > Personal   > Buttons  . Note: The buttons that appear on this window are the only buttons that can be programmed via the Buttons setting. You cannot add buttons to this window.2. To change button assignment, tap on the name of the button in the Button column, and then select a program or command in the Assign a program drop down list. 3. Tap OK to save.4. Press the button to verify that the program is launched or action performed.Available ApplicationsThe Assign a program list contains the applications installed on the terminal. If there is a program installed that you would like to see in this list, paste a Shortcut to the program in the \\Windows\Start Menu\Programs folder. For instructions about creating shortcuts, see Using File Explorer on page 7-5.Additional FunctionsThe Assign a program list also contains the following commands: Command Description<Context Menu> Performs the same function as tap-and-hold to open the context menu for the control.<Input Panel> Opens the soft input panel.<Left Softkey> Opens the menu or performs the action displayed on the left side of the Command bar.<Left Trigger> Activates the scanner/imager.<None> Nothing happens when the button is pressed. <OK/Close> Performs the same function as tapping OK on the screen.Preliminary Draft 1/19/11
7 - 5Using File ExplorerIf you do not see the program listed, you can either use File Explorer to move the program or ActiveSync on the workstation to create a shortcut to the program and place the shortcut in the Start Menu folder.Note: We recommend that you Copy and Paste Shortcut so that you do not alter your program configurations by accident. Using Copy and Paste Shortcut (as opposed to Cut and Paste) ensures that the program files remain where they need to be for the system to find them to perform system functions.1. Tap  > File Explorer  , and navigate to the program (My Device > Program Files). 2. Tap and hold on the program, then tap Copy on the pop-up menu. <Right Softkey> Opens the menu or performs the action displayed on the right side of the Command bar.<Right Trigger> Activates the scanner/imager.<Rotate Screen> Changes the screen orientation from portrait to landscape.<Scroll Down> Scrolls down in the open application.<Scroll Left> Scrolls left in the open application.<Scroll Right> Scrolls right in the open application.<Scroll Up> Scrolls up in the open application.<Start Menu> Opens the Start menu.Command DescriptionPreliminary Draft 1/19/11
7 - 63. Navigate to the Windows folder and open the Start Menu (My Device > Windows > Start Menu > Programs), tap and hold a blank area of the window, and tap Paste Shortcut on the pop-up menu. Note: If there is no blank space available in the window, tap on Menu > Edit > Paste Shortcut.4. Tap   to verify that the program now appears on the Start menu.Using ActiveSync on the WorkstationHere, you are performing the same basic process as on the terminal, except that you are using the Explore utility (Windows Explorer) to copy and paste the shortcut.1. Open ActiveSync > Explore and navigate to the program.2. Right-click on the program and select Create Shortcut. 3. Select the shortcut, right-click, and select Cut.4. Navigate to the Start Menu folder (Windows > Start Menu > Programs).5. Right-click on an empty area and select Paste Shortcut. 6. On the terminal, tap the Start menu.7. Verify that program appears. Preliminary Draft 1/19/11
7 - 7System MenuThe System menu enables you to verify and sometimes alter system parameters. To access the System menu, go to Start > Settings > System. Tap the appropriate icon to open that system setting.        Icon See PageAbout See About on page 7-8.Backlight See Backlight on page 7-9.Battery See Battery on page 7-10.Certificates See Certificates on page 7-10.Customer Feedback See Customer Feedback on page 7-10.Encryption See Encryption on page 7-11.Error Reporting See Error Reporting on page 7-11.Preliminary Draft 1/19/11
7 - 8AboutThe About system setting displays specific information about the terminal. It contains three screens:Version Screen Displays the information about the software, operating system, and processor.Device ID Screen Displays the information the terminal uses to identify itself to other devices. It can be important to know this information if the Dolphin terminal is going to be part of a networked system of devices.Device name: Displays the system’s default name. (This is the name used by ActiveSync.)Description: Displays the description of the device ID.External GPS See External GPS on page 7-11.Five Volt Control See Five Volt Control on page 7-12.HISS See HISS on page 7-12.Managed Programs See Managed Programs on page 7-14.Memory See Memory on page 7-14.Power See Power on page 7-16.RIL See RIL on page 7-15.Regional Settings See Regional Settings on page 7-16.Remove Programs See Remove Programs on page 7-17.Screen See Screen on page 7-18.Task Manager See Task Manager on page 7-19.Icon See PagePreliminary Draft 1/19/11
7 - 9Copyrights Screen Displays important copyright information.BacklightThe Backlight system setting enables you to customize backlight functionality for the display. The back-light for the color display is user-defined. The Backlight system setting screen contains three tabs: Bat-tery Power, External Power, and Brightness.Tap  > Settings > System > Backlight.   The Battery Power tab determines the backlight timeout when the terminal is running on battery power.The External Power tab determines the backlight timeout when the terminal is running on external power.The options on the power tabs are the same. Turn off backlight:  Select how many minutes you want to elapse before the backlight automatically turns off.Turn on backlight: Select this option if you want the backlight to turn on when the button is pressed or the touch screen is tapped.The Brightness tab determines the backlight intensity. Move the slider to set the intensity of the back-light. The default is 8.Battery Power Tab External Power Tab Brightness TabPreliminary Draft 1/19/11
7 - 10BatteryThe Battery system settings menu contains two tabs: Battery Status and Log Config. The Battery Sta-tus tab provides the status of the main battery pack (e.g., Battery Life Percentage, Voltage, Current, Temperature, Type, and Serial Number). The Log Config Tab allows you to enable and customize a time-event log.Tap  > Settings > System > Battery   CertificatesCertificates shows you the certificates that are recognized by the operating system. It contains three screens.Customer FeedbackCustomer Feedback gives you the option to participate in the Microsoft Customer Experience Improve-ment Program.  Battery Status Tab Log Config TabIntermediate Screen Personal Screen Root ScreenPreliminary Draft 1/19/11
7 - 11EncryptionEncryption gives you the option of encrypting files placed on storage cards so that those files cannot be read by any other device.Error ReportingError Reporting gives you the option of enabling or disabling the error reporting function of Windows Embedded Handheld 6.5.External GPSExternal GPS determines which port a third-party GPS software application can use to access the GPS receiver. Note: You need the installation parameters from the GPS manufacturer to configure the connection. Battery Power Tab External Power Tab Brightness TabPreliminary Draft 1/19/11
7 - 12Five Volt ControlFive Volt Control gives you the option to enable 5V output.Note: Do not leave the USB Host enabled at all times.HISSThe Honeywell Integrated Smart Sensor (HISS) configuration utility enables you to configure the Dol-phin’s integrated accelerometer, light, and proximity sensors.Tap  > Settings > System > HISS. Motion SettingsMotion Settings enable you to customize how the terminal responds to motion and object proximity for advanced power management.Display Settings enables or disables Auto Display Orientation. When enabled, the Dolphin's display automatically switches between portrait and landscape depending on how you hold the terminal.Power Management Settings customize how the terminal responds to object proximity and motion. • Save power by turning off the display or suspending the terminal when it is placed face down. • Modify the Motion Detection settings to wake the terminal from suspend mode or prevent the terminal from entering suspend mode when motion is detected.Preliminary Draft 1/19/11
7 - 13Event Track displays an event log summary of detected free fall events exceeding 2 ft. over 250 ms. The summary includes the time, date, and duration of the most recent 50 events. Several options are provided for audible notification of free fall events.Light SettingsLight Sensor Settings customize how the terminal responds to the environmental lighting conditions in which the terminal is being used.•Enable Display Backlight Adjustment automatically adjusts the brightness of the display screen depending on the environmental lighting conditions.•Enable Automatic Keypad Backlight automatically turns the keypad backlight on or off depending on the environmental lighting conditions.Proximity SettingsProximity Sensor Settings customize how the terminal responds to objects detected close to the touch screen display (e.g., a person's face, carrying holster, or tabletop). When enabled, the terminal automatically turns the display off when it detects an object in close proximity to the entire touch panel display. The display turns back on when the sensor detects the removal of the object. Sensor sensitivity is adjusted using the slider bar.Preliminary Draft 1/19/11
7 - 14Managed ProgramsManaged Programs are a list of programs that are managed if enrolled to enterprise domain. Managed Programs is the client-side that works with the server product System Center Mobile Device Manager (MDM). MDM consists of MDM Gateway Server and one or more computers that run MDM Device Man-agement Server; MDM Enrollment Server; and Microsoft SQL Server® 2005 databases. It lets system administrators:• provide an authenticated connection to LOB applications, managed Group Policy, and application packages.• use Group Policy and software packages to manage the enrolled Windows phones (enforce policy, wipe devices, etc.). • manage the requests for and retrieving of certificates for devices and for creating the Active Directory® Domain Service objects that represent these devices. By using these objects, you can manage the devices as if they were members of a domain.MemoryThe Memory system setting displays capacity and usage statistics for both RAM (volatile) and IPSM/Storage Card (non-volatile) memory. Access this setting whenever you receive system messages about memory.You cannot change the terminal’s memory allocation in the Memory system setting. To change the mem-ory allocation, you need to use the SetRAM Power Tool (Start > Power Tools > SetRAM). For more details, please refer to the Honeywell Power Tools User’s Guide, which is available for download from www.honeywellaidc.com.Accelerometer CalibrationTap Start to calibrate the integrated accelerometer sensor used for motion detection. When calibration is complete, the "Accelerometer Calibration Finished!" message window appears.Preliminary Draft 1/19/11
7 - 15There are two screens: Main and Storage Card.RILThe RIL Information screen displays useful statistics for the GSM WAN Voice module (PH8).To verify whether or not the GSM radio is enabled, check the Dolphin Wireless Manager (see page 8-6).Main ScreenThis screen displays the usage statistics of the on-board, volatile RAM memory. Columns: Storage = RAM memory used to store programs and program data.Program = RAM memory used to run programs.Rows:Total = Displays the current MB of memory allocated for use.In use = Displays the total MB of that allocated memory being used.Free = Displays the total MB of memory available.Storage Card ScreenThis screen displays the current capacity and usage sta-tistics of the selected memory type: IPSM or Storage Card. Select the memory type from the drop-down list. IPSM is selected by default. Total storage card memory=The total MB of memory capacity of IPSM or Storage Card.In use = The MB currently being used.Free = The MB that is still available for use. Note: The IPSM partition is fixed at 128MB and cannot be increased in size.IPSM—Short for Internal Persistent Storage Manager, this is the on-board Flash memory that is non-volatile. This memory is non-volatile, data or programs stored in IPSM are not affected when power is removed or the operating system is upgraded. Autoinstall programs, for example, are stored in \\IPSM\Honeywell\Autoinstall so that they are always installed after a operating system upgrade or factory reset. See Hon-eywell support for more information on how to perform a factory reset.Storage Card—You can install one memory card in Dolphin terminals (see Installing a Memory Card on page 3-10). If a storage card is installed in the terminal, you can select it in the drop-down list and see capacity and usage statistics for the card. Preliminary Draft 1/19/11
7 - 16PowerPower system settings contains two tabs: Battery and Advanced. Note: You can also set automatic turn-off times for the terminal to conserve power. When the terminal is “turned off,” that means that it goes into Suspend Mode, see Software/Operating System Upgrades on page 3-17.Regional SettingsRegional Settings enables you to customize the appearance and formatting to your geographic region. Specifically, you can customize numbers (i.e., number of decimal places allowed), currency (i.e.,using the $ or €€ symbol), time, and date. These specifications apply to all screens, including the Home screen. The Region tab displays an overview of the region selected in the drop-down list at the top. The terminal is loaded with a number of pre-programmed regional settings. Select one from the list and the results appear on the screen. To see specific settings or to change a specific setting, tap on one of the tabs, make the change, and tap OK to save it.Battery TabFor more information, see Batteries on page 3-13.Advanced TabDetermines power time-outs.For On battery power, select from the drop-down list, the number of minutes of inactivity you want to pass before the terminal powers off when running on battery power.For On external power, select from the drop-down list, the number of minutes of inactivity you want to pass before the terminal powers off when running on external power.Preliminary Draft 1/19/11
7 - 17Remove ProgramsRemove Programs enables you to remove programs installed on the terminal. Use this setting to trouble-shoot when you receive messages that the terminal is out of memory. The programs removed are removed from RAM memory. Any program (usually CAB or DLL files) stored in the Autoinstall folder (My Device > IPSM > Honeywell > Autoinstall) will re-install after the next hard reset, operating system upgrade or a factory reset. For information about the hard reset process, see Hard Reset (Cold Boot) on page 3-17. See Honeywell support for more information on how to perform a factory reset.1. Tap Remove Programs. In the list, select the program you want to remove. 2. Tap Remove. The following message appears: 3. Tap Yes. Wait while the program is removed. 4. Verify that the program no longer appears in the list.Preliminary Draft 1/19/11
7 - 18ScreenThe Screen system setting contains three screens: General, Clear Type, and Text Size.General ScreenOrientationThe General screen enables you to set the dynamic screen rotation. Three choices of screen orientation are supported: Portrait, Landscape (right-handed), and Landscape (left-handed).Align ScreenThe General Tab also allows you to re-align the screen. You need to re-align the screen if tapping buttons or icons with the stylus no longer seems to work appropriately. Tapping Align Screen brings up the align screen window where you are guided to tap a target several times. This re-calibrates how the touch screen receives input.• Alignment should always be performed with a stylus designed for touch panel applications. The small point is required for accurate calibration.• Press the stylus firmly into the center of the cross-hair target once and release. Do not “double-tap” the target.ClearType ScreenThe display supports ClearType font rendering, which is a Microsoft technology that dramatically increases the readability of text on LCD displays.To enable ClearType font rendering, select Enable ClearType and tap OK. For more information about ClearType font rendering, visit: www.microsoft.com/typography/WhatIsClearType.mspx.Preliminary Draft 1/19/11
7 - 19Task ManagerThe Task Manager provides information about applications and processes running on your mobile com-puter. You can use the Task Manager to monitor the memory and CPU usage of specific applications and processes. Check the Task Manager when you are receiving out of memory errors or when the mobile computer is running slowly. Text Size ScreenThe Text Size screen enables you to perform font scaling within certain views of the: • Home screen, • Contacts, • Calendar, • Messaging, and •Tasks. Font scaling means that you can increase or decrease the point size of the font on application windows.To change the font size, move the slider toward Smallest or Largest. The Example text changes to reflect the font change. Tap OK to save the new font size setting. Preliminary Draft 1/19/11
7 - 20Using the Task ManagerApplications To view the status of the programs running on your mobile computer, tap the Menu button at the bottom of the screen, then tap View > Applications. From the application list, you can:• Tap and hold on an application, then tap Switch To on the pop-up menu.• Tap and hold on an application, then tap End Task or End All Tasks on the pop-up menu. Note: Anytime you stop a running program, it frees up RAM memory. Be advised that, when you stop a program here, any unsaved data in that program is lost. To free up memory without risking data loss, return to the running program, save your data, and close the application. Processes To view information about the processes running on the mobile computer, tap the Menu button at the bottom of the screen, then tap View > Processes.Preliminary Draft 1/19/11
8 - 18CommunicationConnections MenuThe Connections system setting provides access to the terminal’s various wireless communication options.    Note: All server-assigned IP addresses use Dynamic Host Configuration Protocol (DHCP).Note: The Dolphin Wireless Manager controls the wireless radios installed in the terminal, see Dolphin Wireless Manager Window on page 8-6. for additional information.Icon Tapping this icon…Beam Enables infrared communication. See Receiving Data on page 8-3.Connections Opens Microsoft’s connections manager. See Connections Manager on page 8-4.Domain Enroll Opens the Enrollment screen for connecting your phone with company resources. Note: System administrator password is required for domain enrollment.USB to PC Enables advanced wired USB to PC communication via sync sofware. See Communication on page 8-8.Wi-Fi Enables you to configure Wireless Zero Config (WZC).This icon appears only if the 802.11a/b/g driver is loaded on the terminal and the Honeywell WLAN Security Supplicant is not loaded.By default, the Wireless Zero Config is disabled and the supplicant is loaded. This icon appears only if you removed the supplicant and cold booted the terminal. Preliminary Draft 1/19/11
8 - 2Using the IrDA PortUsing the IrDA port, you can send and receive data between the terminal and other devices equipped with infrared. This can include, but is not limited to, Windows Embedded Handheld information such as Contacts and Tasks, as well as software upgrades.IrDA Port LocationTo send or receive, the IrDA ports of both devices - whether it is two terminals, or a terminal and a host device - must be aligned with each other and within a close range. The maximum data transfer speed is 115 Kbps.Sending Data1. Align the IrDA ports.2. Open the program where you created the item you want to send and locate the item in the list.You can also beam files, but not folders, from File Explorer. 3. Tap and hold the item and select Beam File. 4. The IrDA port searches for a receiving IrDA port in the vicinity. The selected device reads “Pending.” IrDA PortPreliminary Draft 1/19/11

Navigation menu