Honeywell EDA50011 Mobile Computer User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3325015
Application ID	iXn0HGWFWuFpold7bnL+/A==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	96.53kB (1206620 bits)
Date Submitted	2017-03-21 00:00:00
Date Available	2017-09-18 00:00:00
Creation Date	2016-01-08 11:10:23
Producing Software	Adobe PDF Library 15.0
Document Lastmod	2016-01-08 11:10:24
Document Title	Users Manual
Document Creator	Adobe InDesign CC 2015 (Macintosh)

Open the Package
ScanPalTM Series
Front Panel
Rear Panel
Please check if the following items included in the package:
· ScanPalTM Enterprise Hybrid Device ;
Enterprise Hybrid Device (EHD)
· Main battery (3.8V, lithium ion battery);
EDA50-111
EDA50-011
· Replaceable adapter plug;
Scan Engine
Power Indicator
· 10-watt power adapter;
Quick Start Guide
Speaker
· USB charging cable;
· Quick Start Guide
Camera
Scan Indicator
Battery Cover Safety
Lock
Battery Cover Buckle
Handle
Battery Cover Buckle
Battery Cover Safety
Button
Display
Battery Cover
Remarks:
If you ordered accessories for the terminal, please make sure they are
Function Key
String Buckle
also included in the package; be sure to keep the original packages for
ScanPalTM EDA50 to be returned for repairing when necessary.
Home Key
Note:
Return Key
End users should not arbitrarily replace the operating system with other
operating systems. To update operating system installed on your device,
you need to get license from the OS vendors.
EDA50-SC-QS Rev B
22/10
EDA50-111/EDA50-011 belongs to ScanPalTM Series
Left Side View
Right Side View
Install the Main Battery
Charging / Sync
Replace the battery with wrong models may cause explosion. Please
Synchronous Communication
make sure to use the battery in accordance with local regulations.
Power Button
Volume Up
Reset Button
Volume Down
Please recycle the battery when possible.
Open the USB cover at the bottom of ScanPalTM EDA50
Do not dispose it as household waste
Connect ScanPalTM EDA50 to the computer with USB charging cable
Please ensure all kits are dry when connect the mobile device or battery
to external devices.
Damages caused by connecting wet kits are not covered by the
warranty.
Scan Button
Scan Button
USB Cover
ScanPal TM EDA50 comes with a battery in a separate package.
Please follow the steps below to install the battery.
1.	Press down the battery cover safety button to move the battery cover
safety lock to the unlock position at right;
2.	Open the battery cover with the battery cover buckle handle ;
3.	Insert the battery (Insert the non-connector side first, then press the
battery down to establish connection between the battery and the
phone)
4.	Press down the battery cover (Insert the non-connector side first,
The Bottom
then press the battery cover down)
5.	Press down the battery cover safety button to move the battery cover
safety lock to the lock position at left
USB charging cable
Charging Contact
USB Cover
Remarks:
Refer to the illustrated installation steps on the following page.
Charging / Sync
Suspend / Wake Up the Terminal
Install memory card
Install SIM Card
Charging
Suspend / Wake Up the Terminal
1. Power off;
1. Power off;
1.	Open the USB cover at the bottom of ScanPalTM EDA50;
Press the power button and then release (less than 2 seconds)
2.	Press down the battery cover safety button to move the lock to the unlock
2.	Press down the battery cover safety button to move the lock to the unlock
2. Connect ScanPalTM EDA50 to the power adapter with USB charging cable;
To wake up the device from sleep mode, press the power button and
3. Make sure the replaceable adapter plug plugged into the power adapter;
then release (less than 2 seconds)
4.	Connect the power adapter to the wall plug and start charging for ScanPalTM
Reboot
EDA50.
Get ScanPalTM EDA50 charged for at least 4 hours before using it, subject to
your battery models.
Using the terminal while charging will significantly extend the time required
for fully charged.
USB Cover
Power adapter
USB charging
cable
3.	Open the battery cover with the battery cover buckle handle ;
4.	Pull out the battery (First open the battery connector side, then pull out the
4.	Pull out the battery (First open the battery connector side, then pull out the
battery)
When something is wrong with the OS, press the reset button and then
5. Insert the MicroSD card to SD card slot until it clicks;
5. Insert the SIM card to SIM card slot until it clicks;
release to restart ScanPalTM EDA50
6.	Insert the battery (Insert the non-connector side first, then press the battery
6.	Insert the battery (Insert the non-connector side first, then press the battery
down to establish connection between the battery and the phone);
ScanPalTM EDA50 Power Indicator
7.	Press down the battery cover (Insert the non-connector side first, then press
the battery cover down);
down to establish connection between the battery and the phone);
7.	Press down the battery cover (Insert the non-connector side first, then press
the battery cover down);
are illustrated as below:
8.	Press down the battery cover safety button to move the battery cover safety
Non- charging process
Off
Battery power is normal
Flashing orange
Battery power is low
Charging process
Constant green
Charging complete
Flashing green
During charging process, and the charging is about to be
9. Power on
lock to the lock position at left;
Orange
Flashing red
Remarks:
position at right;
3. Open the battery cover with the battery cover buckle handle ;
battery)
The status of power indicators in non-charging and charging process
Replaceable adapter plug
position at right;
8.	Press down the battery cover safety button to move the battery cover safety
lock to the lock position at left;
9. Power on
SIM Card
ID Card
completed
During charging process, and the battery power is still low
Battery is abnormal
It's recommended to use Honeywell's peripherals, batteries, USB charging cables
and power adapters.
Damages caused by using non-Honeywell peripherals, batteries, USB charging
cables or power adapters are not covered by the warranty.
Warnings:
Please make sure all kits are dry when use the terminal and battery with other
accessories.
Note: only EDA50-111 delivers this feature
Damages caused by using wet kits may not be covered by the warranty.
Use Scan Engine
Aiming Beam
Technical Support
Align the aiming beam with the barcodes, and adjust the angle between the
The aiming beam gets narrower when the terminal gets closer to the
For information about technical support, after-sales service and maintenance, please
barcodes, while it gets wider when the terminal gets farther from the
visit www.honeywellaidc.com .
beam and the barcodes to get the best results.
The recommended range from the terminal to the barcodes is 4" to 10" (10cm
to 25cm)
barcodes.
The smaller the barcodes, the closer the aiming beams should get to the barcodes
1.	C lick the demo application on the interface, and then select Scan demo
The bigger the barcodes, the father the aiming beams should get to the barcodes
program;
2. Click Scan on the screen or press the Scan Button;
3. Align ScanPal
TM
EDA50 with the barcodes;
4.	A djust the aiming beam: in order to obtain the best performance, avoid
scanning in a slight angle and slowly move the beam on the barcodes by
Beam positions when scan 2D images
User Documents
For the local version of this article, please visit www.honeywellaidc.com .
Patents
For information on patents, please refer to www.honeywellaidc.com/patents.
Warranty
Please log into www.honeywellaidc.com/warranty_information for warranty information
on your product.
scanning the reflection of the barcodes;
5.	The terminal will beep when the barcodes are successfully decoded, which
means the information included in the barcode has been obtained by the
terminal
Disclaimer
Honeywell International Inc. reserves the rights to modify the specifications and other
information mentioned above without prior notification.
Readers should consult Honeywell International Inc. to make sure if any changes made
any time they read this article.
The information in this article does not represent any commitments of Honeywell
International Inc.
Honeywell International Inc. is not responsible for direct or indirect loss caused by any
technical or editing errors or omissions contained in this article.
The proprietary information contained in this article is protected by copyright.
All rights reserved.
Without prior written consent from Honeywell International Inc., any form of photocopy,
copy or translation into other languages for any part of this article is not allowed.
Scan Engine
All Rights Reserved by Honeywell International Inc.
Website: www.honeywellaidc.com

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.6-c067 79.157747, 2015/03/30-23:40:42
Create Date                     : 2016:01:08 11:10:23+08:00
Metadata Date                   : 2016:01:08 11:10:24+08:00
Modify Date                     : 2016:01:08 11:10:24+08:00
Creator Tool                    : Adobe InDesign CC 2015 (Macintosh)
Instance ID                     : uuid:8a21945f-3a90-0745-ab8d-ae6af0d79196
Original Document ID            : xmp.did:4ea4042c-b449-4720-937f-bd43af1cecf0
Document ID                     : xmp.id:27de5599-0d0a-4cf3-8b36-81046107a622
Rendition Class                 : proof:pdf
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CC 2015 (Macintosh)
History Changed                 : /
History When                    : 2016:01:08 11:10:23+08:00
Derived From Instance ID        : xmp.iid:214a6c43-1bfc-40d4-8707-e73ff3ed4741
Derived From Document ID        : xmp.did:4ea4042c-b449-4720-937f-bd43af1cecf0
Derived From Original Document ID: xmp.did:4ea4042c-b449-4720-937f-bd43af1cecf0
Derived From Rendition Class    : default
Format                          : application/pdf
Producer                        : Adobe PDF Library 15.0
Trapped                         : False
Page Count                      : 2
Creator                         : Adobe InDesign CC 2015 (Macintosh)

EXIF Metadata provided by EXIF.tools