Huawei Technologies BTS3911B Pico BTS User Manual
Huawei Technologies Co.,Ltd Pico BTS
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2687127 |
| Application ID | OLZcL5S8Zy3Yn7irfVLdsQ== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 200.47kB (2505848 bits) |
| Date Submitted | 2015-07-21 00:00:00 |
| Date Available | 2016-01-17 00:00:00 |
| Creation Date | 2017-09-23 09:04:37 |
| Producing Software | GPL Ghostscript 9.18 |
| Document Lastmod | 2017-09-23 09:04:37 |
| Document Title | Microsoft PowerPoint - BTS3911B Installation Guide (Draft A).ppt [兼容模å¼] |
| Document Creator | PScript5.dll Version 5.2.2 |
| Document Author: | wWX143264 |
BTS3911B V100R010C10 Installation Guide Issue: Draft A Date: 2015-01-20 HUAWEI TECHNOLOGIES CO., LTD. Installation Tools Marker Diagonal pliers Utility knife Cable cutter Rubberr mallet Socket wrench (M6) Wire stripper RJ11 crimping tool Level Power cable crimping tool Phillips torque screwdriver ESD gloves Hammer drill (Ø6, Ø8 or Ø12 bore) Protective gloves Torque wre ench (bore size: 10 mm) crown saw (Ø60 bore) (M4 to M6) Ladder m cleaner Vacuum Network cable tester Multimeter Measuring tape Torque wrench for SMA connectors Copyright © Huawei Technologies Co., Ltd. 2015. All rights reserved. Product Introduction BTS3911B The BTS3911B uses internal antennas. Appearance Ports ensions Dime Port Description Port Description Micro SD Anchor slot for the Micro SD card used for deployment Port for clock output Port for clock synchronization Port for transmission and power supply Mini USB RGPS P&E PSE Appearance and Dimensions Port Description Port Description DATA Power port that supplies power to the PSE Data input port that connects to transmission equipment of an operator PoE output port that connects to the BTS3911B PoE Installation Scenarios Wall-mounted Installation • • • • The wall must have a bearing capacity of at le east four times the weight of the BTS3911B. The screws must be torqued to 1.5 N·m and work properly without causing cracks on the wall. The thickness of the wall must be less than th he bolt length (45 mm) to allow for installation through an existing plate. If the wall is too thick, use a customer-provide ed installation plate. z By drilling holes z Through an existin ng plate z By using a customerprovided installation plate Ceiling-mounted Installation • • • The ceiling (such as concrete ceiling) must ha ave a bearing capacity of at least four times the weight of the BTS3911B. The screws must be torqued to 1.5 N·m and work properly without causing cracks on the wall. The thickness of the ceiling must be less than n the bolt length (45 mm) to allow for installation through an existing plate. z By drilling holes z Through an n existing plate z By using a keel Keel-mounted Installation The BTS3911B can be installed on a U-shaped, T-shaped, H-shaped, or other shaped keel, depending di on site it requirements. t Th The ffollowing ll i fi fig gure illustrates ill t t kkeel-mounted t d iinstallation t ll ti on a ceiling. Clearance Requirements z For a BTS3911B z For a PSE Installation Environment Requirements Operating g Environment Requirements Specifications Requirements Remarks Operating temperature -5 ºC to +40ºC Relative humidity 5% RH to 95% RH -60 m to +1800 m The BTS3911B works properly under the condition. 1800 m to 4000 m From the altitude of 1,800 m, the maximum operating temperature drops by 1ºC 1 C each time the altitude increases by 220 m. Altitude Other Requirements • • • • • • • The BTS3911B cannot be installed near air conditioner outlet or near other heat-generating appliances. The BTS3911B cannot be installed near a strrong g heat source of any y kind. The BTS3911B cannot be installed near placces where water may leak or drip, such as near outdoor air conditioner units, water pipes, pip pelines, and roofs with water leaks or dripping runoff. The installation must be protected against raiin. No window exists at either side of the wall where the BTS3911B is installed. The installation position must be far away fro om high voltage, highly corrosive devices, flammable or explosive substances,, and elecctromagnetic interference. The BTS3911B must be installed in a dry, we ell-ventilated, and dustproof place. If the BTS3911B is installed in parking areas or basements, the installation position must be well ventilated. Installation Process Obtaining the ESN Before installation, record the ESN, which will be b used during commissioning. Before removing the backup ESN label, photograph it. Remove the backup ESN label from the BTS3911B packing box. Record the ESN by following instructions provided d in Appendix 3 and report the ESN to the BTS3911B commissioning personnel. Keep the backup ESN label secure. Installing a BTS3911B BTS3911B can be installed on a wall or ceiling directly or by using a plate or keel. Mounting Kits z Installation on a plate or keel z Wall- or ceiling-mounted installation (1) Mounting bracket (2) V clamp (3) Bolt (M4X35) (4) Bolt (M4X36) (1) Mounting bracket (2) Screws (M3.5X35) (3) Plastic expansion sleeve (4) Flat washer Installing a BTS3911B on a Wall Mark anchor points Drill holes and install plastic expansion sleeves Install mounting kits Install the BTS3911B on the wall (1) Wall (2) Mounting bracket (3) Anchor points Installing a BTS3911B on a Ceiling Mark anchor points Drill holes and install plastic expansion sleeves (1) Wall (2) Mounting bracket (3) Anchor points Install mounting kits Install the BTS3911B on the ceiling Installing a BTS3911B on a Plate On a ceiling plate (for example, daughter board on the ceiling) capable of being screwed Mark anchor points Install mounting kits (1) Plate (2) Mounting bracket (3) Anchor points Install the BTS3911B on the ceiling ili plate l t Use a hammer drill with Ф6 bore to drill holes On a ceiling plate (for example example, gypsum board) incapable of being screwed Use a crown saw to drill a hole (diameter: 60-65 mm) Partially install mounting kits Lead the U-shaped metal plate through the hole on the ceiling I t ll th Install the BTS3911B on the th ceiling ili plate l t Secure mounting ti kits kit to t the th ceiling ili plate l t Installing a BTS3911B on a Keel Mark anchor points Plate Install moun nting kits Install the BTS3911B on the plate U-shaped keel U-shaped metal plate Use a hammer drill with Ф12 bore to drill holes Installing the PSE and Its Cables The PSE can be installed only on an indoor wall.. Installing the PSE Installing Cables Place the PSE against the wall, level it in the installation position, and mark anchor points Power port Drill holes and install expansion bolts Install the PSE (1) Ethernet cable (2) PSE power cable Installing the BTS3911B Cables z Installing I t lli an Ethernet Eth t cable bl z Installing I t lli an RGPS signal l cable bl Installation Check SN Check Item Th iinstallation The ll i position i i conforms to the h engineering i d design i and d meets clearance requirements. The BTS3911B is securely installed. In wall-mounted scenarios, the holes on the mounting bracket are well aligned with the holes of the expansion bolt assemblies. In addition, the mounting bracket is secured on the wall evenly and tightly. The surface of the BTS3911B is neat and cle ean. The external paint is intact. The labels, tags, and nameplates are correct, legible, and complette. In the wall-mounted scenario, the holes of the mounting bracket are well aligned with the holes of the expansion bolt assemblies. In addition, the mounting bracket is secured on the wall evenly and steadily. ort-circuited or reverse connected. All cables are not None of power cables or signal cables is sho damaged or broken. und and routed separately from other cables. The power cables and PGND cables are bou The connectors of the signal cables are intacct and securely connected. The signal cables are intact. Labels are correct correct, legible legible, and complete at b both ends of each cable cable. Power-on Check After you unpack a BTS3911B, you must power it on within n 24 hours. If you power off the BTS3911B for maintenance, you must restore power to the BTS3911B wiithin 24 hours. Check Process Checking the Indicator Status If… Then… 3GPP CPRI WIFI LINK blinks white (on for 1s and off for 1s) is steady white blinks white (on for 1 and 1s d off ff for f 1s) 1 ) is steady white The BTS3911B is running correctly. tl NOTE • • 10 During the BTS3911B startup, there is no need to observe the indicator status. During a start, the BTS3911B reads and writes the flash and therefore the indicators blinking quickly may blink irregularly for 1-2 seconds, which does not affect services. Appendix 3: ESN collection template The ESN collection template is used to record the insta allation position and ESN of the site at the initial installation stage to facilitate subsequent commissionin ng and maintenance. No No. Site Site Name Location Information ESN Number Sample xx BTS3911B xx floor, xx building, xx mansion Note: This template is essential to the engineering stag ge and subsequent maintenance, especially when multiple devices are installed within a short distance. This is because the template defines the radio network to access. Please carefully maintain this temp plate. HUAW WEI TECHNOLOGIES CO CO., LTD LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129 People's Republic of China www.huawei.com 11 Regulatory Compliance Statement BTS3911B 0682 Issue: 01 Date:2015-7-6 HUAWEI TECHNOLOGIES CO., LTD. Copyright © Huawei Technologies Co., Ltd. 2010. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. Trademarks and Permissions and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd. All other trademarks and trade names mentioned in this document are the property of their respective holders. Notice The purchased products, services and features are stipulated by the contract made between Huawei and the customer. All or part of the products, services and features described in this document may not be within the purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information, and recommendations in this document are provided "AS IS" without warranties, guarantees or representations of any kind, either express or implied. The information in this document is subject to change without notice. Every effort has been made in the preparation of this document to ensure accuracy of the contents, but all statements, information, and recommendations in this document do not constitute the warranty of any kind, express or implied. Huawei Technologies Co., Ltd. Address: Huawei Industrial Base Bantian, Longgang Shenzhen 518129 People's Republic of China Website: http://www.huawei.com Email: support@huawei.com Issue (01) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 1 Regulatory Compliance Statement Regulatory Compliance Statement About This Chapter 1.1 Declaration of Conformity to European Directives 1.1 Declaration of Conformity to European Directives Figure 1-1 Declaration of Conformity to European Directives Issue (01) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 1-1 1 Regulatory Compliance Statement 1-2 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Issue () 2 Regulatory Compliance Information Regulatory Compliance Information About This Chapter 2.1 Regulatory Compliance Standards 2.2 European Regulatory Compliance 2.3 U.S.A Regulatory Compliance 2.4 Canada Regulatory Compliance 2.5 Japanese Regulatory Compliance 2.6 CISPR 22 Compliance 2.7 China RoHS hazardous substance table 2.8 India RoHS hazardous substance table 2.9 Other Markets 2.1 Regulatory Compliance Standards Product complies with the standards listed in Table 2-1. Issue (01) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 2-1 2 Regulatory Compliance Information Table 2-1 Regulatory compliance standards Discipline Standards EMC CISPR22 Class B CISPR24 EN55022 Class B EN50024 ETSI EN 301 489 Class B CFR 47 FCC Part 15 Class B FCC Part 2 FCC Part 22 FCC Part 24 ICES 003 Class B/Class A AS/NZS CISPR22 Class B GB9254 Class B VCCI Class B CNS 13438 Class B IEC61000-6-1 IEC61000-6-3 EN61000-6-1 EN61000-6-3 IEC 60950-1 IEC60950-22 IEC/EN60215 IEC/EN41003 EN 60950-1 UL 60950-1 CSA C22.2 No 60950-1 AS/NZS 60950.1 BS EN 60950-1 IS 13252 GB4943 FDA rules, 21 CFR 1040.10 and 1040.11 IEC60825-1, IEC60825-2, EN60825-1, EN60825-2 GB7247 Safety Laser safety 2-2 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Issue (01) 2 Regulatory Compliance Information Discipline Standards RF ETSI EN 301 908 ETSI EN 300 328 ETSI EN 301 893 FCC Part 2 FCC Part 24 FCC Part 27 RSS-133 RSS-139 ICNIRP Guideline 1999-519-EC EN 50385 OET Bulletin 65 FCC Part 1 IEEE Std C95.1 EN 60215 RSS-102 Health Environmental protection 2011/65/EU EC NO. 1907/2006 (REACH) 2002/96/EC Grounding Issue (01) (RoHS) (WEEE) ITU-T K.27 ETSI EN 300 253 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 2-3 2 Regulatory Compliance Information Discipline Standards NOTE EMC: electromagnetic compatibility NEBS: Network Equipment Build Standard RF: radio frequency CISPR: International Special Committee on Radio Interference EN: European Standard ETSI: European Telecommunications Standards Institute CFR: Code of Federal Regulations FCC: Federal Communication Commission IEC: International Electrotechnical Commission AS/NZS: Australian/New Zealand Standard VCCI: Voluntary Control Council for Interference CNS: Chinese National Standard UL: Underwriters Laboratories CSA: Canadian Standards Association BS: British Standard IS: Indian Standard GR: General Requirement FDA: Food and Drug Administration BTS: Base Transceiver Station GSM: Global System for Mobile communications WLAN: wireless local area network ICNIRP: International Commission on Non-Ionizing Radiation Protection OET: Office of Engineering Technology IEEE: Institute of Electrical and Electronics Engineers RoHS: restriction of the use of certain hazardous substances 2.2 European Regulatory Compliance Product complies with the following European directives and regulations. 2004/108/EC (EMC) 2006/95/EC (low voltage) 1999/5/EC (R&TTE) 2011/65/EU (RoHS) EC NO. 1907/2006 (REACH) 2002/96/EC (WEEE) Product complies with Directive 2002/95/EC, 2011/65/EU and other similar regulations from the countries outside the European Union, on the RoHS in electrical and electronic equipment. The device does not contain lead, mercury, cadmium, and hexavalent chromium and brominated flame retardants (Polybrominated Biphenyls (PBB) or Polybrominated Diphenyl Ethers (PBDE)) except for those exempted applications allowed by RoHS directive for technical reasons. 2-4 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Issue (01) 2 Regulatory Compliance Information Product complies with Regulation EC NO. 1907/2006 (REACH) and other similar regulations from the countries outside the European Union. Huawei will notify to the European Chemical Agency (ECHA) or the customer when necessary and regulation requires. Product complies with Directive 2002/96/EC on waste electrical and electronic equipment (WEEE). Huawei is responsible for recycling its end-of-life devices, and please contact Huawei local service center when recycling is required. Huawei strictly complies with the EU Waste Electrical and Electronic Equipment Directive (WEEE Directive) and electronic waste management regulations enacted by different countries worldwide. In addition, Huawei has established a system for recycling and reuse of electronic wastes, and it can provide service of dismantling and recycling for WEEE. By Huawei recycling system, the waste can be handled environmentally and the resource can be recycled and reused fully, which is also Huawei WEEE stratagem in the word. Most of the materials in product are recyclable, and our packaging is designed to be recycled and should be handled in accordance with your local recycling policies. In accordance with Article 11(2) in Directive 2002/96/EC (WEEE), products were marked with the following symbol: a cross-out wheeled waste bin with a bar beneath as below: In order to avoid the possibility of exceeding the Europe radio frequency exposure limits, human proximity to the equipment shall not be less than 0.124 m 2.3 U.S.A Regulatory Compliance 2.3.1 Safety compliance Mark 2.3.2 FCC 2.3.1 Safety compliance Mark Issue (01) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 2-5 2 Regulatory Compliance Information 2.3.2FCC Product complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: This device does not cause harmful interference. This device must accept any interference received, including interference that may cause undesired operation. If this device is modified without authorization from Huawei, the device may no longer comply with FCC requirements for Class B digital devices. In that a case, your right to use the device may be limited by FCC regulations. Moreover, you may be required to correct any interference to radio or television communications at your own expense. This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses and radiates radio frequency energy. If it is not installed and used in accordance with the instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which can be determined by turning the device off and on, the user may take one or more of the following measures: Reorient or relocate the receiving antenna. Reinforce the separation between the device and receiver. Connect the device into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio or TV technician for assistance. In order to avoid the possibility of exceeding the 47CFR FCC Part 1 & OET Bulletin 65 radio frequency exposure limits, human proximity to the equipment shall not be less than 0.182 m 2.4 Canada Regulatory Compliance 2.4.1 RSS-Gen statement This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage 2-6 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Issue (01) 2 Regulatory Compliance Information radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. 2.4.2 RSS-102 statement This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by Industrial Canada and meets the requirements for radiation exposure limits set forth for an uncontrolled environment. In order to avoid the possibility of exceeding the Industrial Canada radio frequency exposure limits, human proximity to the equipment shall not be less than 0.235 m Cet appareil est conçu et fabriqué pour ne pas dépasser les limites d'émission pour l'exposition à la fréquence radio (RF) de l'énergie fixé par l'Industrielle Canada et répond aux exigences en matière de limites d'exposition aux rayonnements définies pour un environnement non contrôlé. Afin d'éviter la possibilité de dépasser les limites d'exposition aux fréquences radio industrielle du Canada, la proximité humaine pour l'appareil nedoit pas être inférieure à 0.235 The device is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems; The worst-case tilt angle(s) necessary to remain compliant with the e.i.r.p. elevation mask requirement set forth in RSS-247 Section 6.2.2(3). High-power radars are allocated as primary users (i.e. priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices. 2.5 Japanese Regulatory Compliance 2.5.1 VCCI 2.5.1VCCI Product complies with VCCI Class B by Information Technology Equipment (ITE). The preceding translates as follows: This is a Class B product based on the standard of the Voluntary Control Council for Interference by Information Technology Equipment (VCCI).If this product is used Near a radio or television receiver in a domestic environment. It may cause radio Interference.Install and use the equipment according to the instruction manual. Issue (01) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 2-7 2 Regulatory Compliance Information 2.6 CISPR 22 Compliance Product complies with CISPR 22 for Class B by the ITE. 2.7 China RoHS hazardous substance table This products described in this guide complies with “the Administration on the Control of Pollution Caused by Electronic Information Products” which is also called China RoHS 产品中有害物质或元素的名称及含量 部 名称 镉 铅 汞 Frame 〇 ╳ 〇 Alloy Parts 〇 ╳ Power Adapter 〇 Metal Fittings 多溴联苯 多溴联苯醚 〇 〇 〇 〇 〇 〇 〇 ╳ 〇 〇 〇 〇 〇 〇 〇 〇 〇 〇 PCBA 〇 ╳ 〇 〇 〇 〇 Capacitor 〇 ╳ 〇 〇 〇 〇 Other electronics 〇 ╳ 〇 〇 〇 〇 Screen 〇 〇 〇 〇 〇 〇 Solder 〇 ╳ 〇 〇 〇 〇 Cable ╳ ╳ 〇 〇 〇 〇 Plastic and Polymer 〇 ╳ 〇 〇 〇 ╳ Label 〇 〇 〇 〇 〇 〇 Battery 〇 〇 〇 〇 〇 〇 〇：表示该有毒有害物质在该部 2-8 六 铬 所有均质材料中的含量均在SJ/T11363-2006 标准规定的限量要求以下。 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Issue (01) 2 Regulatory Compliance Information ╳：表示该有毒有害物质至少在该部 求。 的某一均质材料中的含量超出SJ/T11363-2006 标准规定的限量要 2.8 India RoHS hazardous substance table This products described in this guide complies with the “e-waste (Management and Handling) Rules, 2011”of India which is also called India RoHS. Restricted Substances in Product Part Descriptions Cd Pb Hg Cr(VI) PBBs PBDEs Frame 〇 ╳ 〇 〇 〇 〇 Alloy Parts 〇 ╳ 〇 〇 〇 〇 Power Adapter 〇 ╳ 〇 〇 〇 〇 Metal Fittings 〇 〇 〇 〇 〇 〇 PCBA 〇 ╳ 〇 〇 〇 〇 Capacitor 〇 ╳ 〇 〇 〇 〇 Other electronics 〇 ╳ 〇 〇 〇 〇 Screen 〇 〇 〇 〇 〇 〇 Solder 〇 ╳ 〇 〇 〇 〇 Cable ╳ ╳ 〇 〇 〇 〇 Plastic and Polymer 〇 ╳ 〇 〇 〇 ╳ Label 〇 〇 〇 〇 〇 〇 Battery 〇 〇 〇 〇 〇 〇 〇: indicates that the content of the toxic and hazardous substance in all the Homogeneous Materials of the part is below the concentration limit requirement as described in the e-waste (Management and Handling) Rules, 2011. ╳: indicates that the content of the toxic and hazardous substance in at least one Homogeneous Material of the Issue (01) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 2-9 2 Regulatory Compliance Information part exceeds the concentration limit requirement as described in S in the e-waste (Management and Handling) Rules, 2011. 2.9 Other Markets For relevant compliance information/documentation for markets not mentioned above, please contact Huawei representative 2-10 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Issue (01)
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Encryption : Standard V4.4 (128-bit) User Access : Print, Extract, Print high-res Author : wWX143264 Create Date : 2015:01:20 14:20:34+08:00 Modify Date : 2015:07:21 10:25:53-07:00 Has XFA : No XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Producer : Acrobat Distiller 7.0 (Windows) Creator Tool : PScript5.dll Version 5.2.2 Metadata Date : 2015:07:21 10:25:53-07:00 Format : application/pdf Title : Microsoft PowerPoint - BTS3911B Installation Guide (Draft A).ppt [兼容模式] Creator : wWX143264 Document ID : uuid:d953df24-6cb4-41d3-804b-d846c2c7dd3d Instance ID : uuid:51221acc-5fcc-4b34-b3be-85846382265f Page Count : 27EXIF Metadata provided by EXIF.tools