HuiZhou BoShiJie Technology RC10 GSM wireless data module User Manual

HuiZhou BoShiJie Technology CO.,Ltd GSM wireless data module

User Manual

User Manual HuiZhou BoShiJie Technology CO.,Ltd Product name：GSM wireless data module Model: RC10 FCC ID : 2AQSK- RC10
Overview The RC10 module is a two-in-one module (2G wireless communication and positioning) based on the MTK 2503D, Size:24 mm×15 mm×3.0 mm, Total 57PIN, Suitable for GSM networks for global roaming. The RC10 module with a Abundant interface and a powerful software support platform. With secondary development software and hardware platform, it can support a variety of peripheral devices to meet the user's business function needs. Ⅰ. The Appearance Of The Module Ⅱ. Technical specifications Main Technical Specifications Of The Rc10 Module Product Feature Description Power Voltage 3.3V～4.6V（Recommended value4.0V） Working Frequency Quad-band: GSM850/EGSM900/DCS1800/PCS1900 Module can search for frequency bandsautomatically GPRSData characteristics GPRSData downlink transmission：maximum85.6Kbps GPRSData uplink transmission：maximum42.8Kbps
Ⅲ. Pin definition RC10 is an application mode with module as the main processor 1. Power supply 2. Serial Port PIN Name PIN No. Description Remark UTXD1 23 Main Port：Print、Download Serial port power supply 2.8V URXD1 22 GNSS_UART_TX 46 GPS serial port GNSS_UART_RX 45 UTXD3 6 Serial port power supply2.8V URXD3 7 3. SIM card port PIN Name PIN No. Description Remark SIM1_SCLK 54 SIM card clock pin SIM1_SRST 52 SIM card reset pin SIM1_SIO 51 SIM card data pin VSIM1 53 SIM card power-up pin Power-up 1.8V or 3V 4. Booting PIN Name PIN No. Description Remark PWRKEY 34 Module boot pin Lower boot 5. Audio interface PIN Name PIN No. Description Remark MIC_N0 44 Audio input PIN Name PIN No. Description Remark VBAT 37、38 Power supply Vmax=4.6V Vmin=3.3V Vnorm=4V VBAT1 11 GPS power supply Connect with 37 &38 VIO28 19 Output 2.8V Max current 100mA VRTC 47 RTC clock output 2.8V/2mA GPS_RTC 15 GPS clock input GND 1、29、31、36、48、55、57 AGND
MIC_P0 43 SPKP1 42 Audio output SPKN1 41 6. AD port PIN Name PIN No. Description Remark AD0 40 AD detect Max voltage 2.8V AD1 39 AD detect Max voltage 2.8V 7. Antenna PIN Name PIN No. Description Remark ANT1 30 GSM Antenna ANT2 56 GPS Antenna 8. USB download PIN Name PIN No. Description Remark VBUS 35 Voltage 5V Download detect USB_DM 50 USB_DP 49 9. I2C port PIN Name PIN No. Description Remark SCL 16 I2C clock pin Voltage 2.8V SDA 17 I2C data pin Voltage 2.8V 10. GPIO port PIN Name PIN No. Description Remark GPIO_0 21 Max Voltage 2.8V GPIO_1 18 Max Voltage 2.8V GPIO_2 13 Max Voltage 2.8V GPIO_3 14 Max Voltage 2.8V GPIO_4 9 Max Voltage 2.8V GPIO_5 8 Max Voltage 2.8V GPIO_6 5 Max Voltage 2.8V GPIO_7 10 Max Voltage 2.8V GPIO_8 12 Max Voltage 2.8V GPIO_10 26 Max Voltage 2.8V GPIO_11 25 Max Voltage 2.8V GPIO_12 20 Max Voltage 2.8V 11. Others PIN Name PIN No. Description Remark
KCOL0 24 USB mode select NC 2、3、4、27、28、32、33 Hanging IV. Attentions 1、Working voltage：3.3V~4.6V，typical voltage4.0V 2、Working current：Max working current 3A 3、Standby power consumption：18mA 4、Working temperature：-20°~80° 5、Module size：24*15mm V. Schematic diagramencapsulate VI. PCB encapsulate
Installation warning statement (a)product should not collocate with other radio (b) GSM wireless data module is designed to comply with the ID statement. FCC ID is 2AQSK- RC10. The host system using GSM wireless data module, should have label indicated FCC ID 2AQSK- RC10 (c) If you buy this module,you only use the the antenna(The Gain is 1.80dBi for GSM850 and The antenna is 2.50dBi for GSM1900) of GSM wireless data module,Do not use the other antenna (d): The GSM wireless data module is Only applicable for the mobile device.
FCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. FCC RF Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. for example Used in Such as Car locator, etc.

Navigation menu