HuiZhou BoShiJie Technology RC10 GSM wireless data module User Manual

HuiZhou BoShiJie Technology CO.,Ltd GSM wireless data module

User Manual

Download: HuiZhou BoShiJie Technology RC10 GSM wireless data module User Manual
Mirror Download [FCC.gov]HuiZhou BoShiJie Technology RC10 GSM wireless data module User Manual
Document ID3966652
Application IDjRDUL3gSeea+VpclQuBNyg==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize19.62kB (245191 bits)
Date Submitted2018-08-17 00:00:00
Date Available2018-08-17 00:00:00
Creation Date2018-08-15 11:49:25
Producing SoftwareMicrosoft® Office Word 2007
Document Lastmod2018-08-15 11:49:25
Document TitleUser Manual
Document CreatorMicrosoft® Office Word 2007
Document Author: 洪慧-博实结科技

User Manual
HuiZhou BoShiJie Technology CO.,Ltd
Product name:GSM wireless data module
Model: RC10
FCC ID : 2AQSK- RC10
Overview
The RC10 module is a two-in-one module (2G wireless communication and
positioning) based on the MTK 2503D, Size:24 mm×15 mm×3.0 mm, Total 57PIN,
Suitable for GSM networks for global roaming. The RC10 module with a
Abundant interface and a powerful software support platform. With secondary
development software and hardware platform, it can support a variety of peripheral
devices to meet the user's business function needs.
Ⅰ. The Appearance Of The Module
Ⅱ. Technical specifications
Main Technical Specifications Of The Rc10 Module
Product Feature
Power Voltage
Working Frequency
GPRSData characteristics
Description
3.3V~4.6V(Recommended value4.0V)
Quad-band: GSM850/EGSM900/DCS1800/PCS1900
Module can search for frequency bandsautomatically
GPRSData downlink transmission:maximum85.6Kbps
GPRSData uplink transmission:maximum42.8Kbps
Ⅲ. Pin definition
RC10 is an application mode with module as the main processor
1. Power supply
PIN Name
VBAT
PIN No.
37、38
Description
Power supply
VBAT1
11
GPS power supply
VIO28
VRTC
GPS_RTC
19
47
15
1、29、31、
36、48、55、
57
Output 2.8V
RTC clock output
GPS clock input
PIN No.
23
22
Description
Remark
Main Port:Print、
Serial port power supply 2.8V
Download
GND
2. Serial Port
PIN Name
UTXD1
URXD1
GNSS_UART_T
GNSS_UART_R
UTXD3
URXD3
Remark
Vmax=4.6V
Vmin=3.3V
Vnorm=4V
Connect with 37
&38
Max current 100mA
2.8V/2mA
AGND
46
GPS serial port
45
Serial port power supply2.8V
3. SIM card port
PIN Name
SIM1_SCLK
SIM1_SRST
SIM1_SIO
VSIM1
PIN No.
54
52
51
53
Description
Remark
SIM card clock pin
SIM card reset pin
SIM card data pin
SIM card power-up pin Power-up 1.8V or 3V
4. Booting
PIN Name
PWRKEY
PIN No.
34
Description
Module boot pin
Remark
Lower boot
Description
Audio input
Remark
5. Audio interface
PIN Name
PIN No.
MIC_N0
44
MIC_P0
SPKP1
SPKN1
43
42
41
6. AD port
PIN Name
AD0
AD1
PIN No.
40
39
Description
AD detect
AD detect
Remark
Max voltage 2.8V
Max voltage 2.8V
7. Antenna
PIN Name
ANT1
ANT2
PIN No.
30
56
Description
GSM Antenna
GPS Antenna
Remark
8. USB download
PIN Name
VBUS
USB_DM
USB_DP
PIN No.
35
50
49
Description
Voltage 5V
Remark
Download detect
9. I2C port
PIN Name
SCL
SDA
PIN No.
16
17
Description
I2C clock pin
I2C data pin
Remark
Voltage 2.8V
Voltage 2.8V
10. GPIO port
PIN Name
GPIO_0
GPIO_1
GPIO_2
GPIO_3
GPIO_4
GPIO_5
GPIO_6
GPIO_7
GPIO_8
GPIO_10
GPIO_11
GPIO_12
PIN No.
21
18
13
14
10
12
26
25
20
Description
Max Voltage 2.8V
Max Voltage 2.8V
Max Voltage 2.8V
Max Voltage 2.8V
Max Voltage 2.8V
Max Voltage 2.8V
Max Voltage 2.8V
Max Voltage 2.8V
Max Voltage 2.8V
Max Voltage 2.8V
Max Voltage 2.8V
Max Voltage 2.8V
Remark
11. Others
PIN Name
PIN No.
Description
Remark
Audio output
KCOL0
NC
24
USB mode select
2、3、4、27、 Hanging
28、32、33
IV. Attentions
1、Working voltage:3.3V~4.6V,typical voltage4.0V
2、Working current:Max working current 3A
3、Standby power consumption:18mA
4、Working temperature:-20°~80°
5、Module size:24*15mm
V. Schematic diagramencapsulate
VI. PCB encapsulate
Installation warning statement
(a)product should not collocate with other radio
(b) GSM wireless data module is designed to comply with the ID statement. FCC ID is
2AQSK- RC10. The host system using GSM wireless data module, should have label
indicated FCC ID 2AQSK- RC10
(c) If you buy this module,you only use the the antenna(The Gain is 1.80dBi for GSM850
and The antenna is 2.50dBi for GSM1900) of GSM wireless data module,Do not use the
other antenna
(d): The GSM wireless data module is Only applicable for the mobile device.
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception,
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
FCC RF Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with a
minimum distance of 20 centimeters between the radiator and your body. for example Used
in Such as Car locator, etc.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 7
Language                        : zh-CN
Tagged PDF                      : Yes
Author                          : 洪慧-博实结科技
Creator                         : Microsoft® Office Word 2007
Create Date                     : 2018:08:15 11:49:25
Modify Date                     : 2018:08:15 11:49:25
Producer                        : Microsoft® Office Word 2007
EXIF Metadata provided by EXIF.tools
FCC ID Filing: 2AQSK-RC10

Navigation menu