Humax T3 11N Wireless Roaming Router User Manual
Humax Co., Ltd. 11N Wireless Roaming Router
Humax >
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3564384 |
| Application ID | aSj2Wyj5ulfh/78CBQsWOA== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 50.29kB (628615 bits) |
| Date Submitted | 2017-09-15 00:00:00 |
| Date Available | 2017-10-30 00:00:00 |
| Creation Date | 2017-06-19 15:37:07 |
| Producing Software | Acrobat Distiller 9.0.0 (Windows) |
| Document Lastmod | 2017-06-19 15:37:07 |
| Document Title | untitled |
| Document Creator | Adobe InDesign CC 2015 (Windows) |
Use it as Router LEDs on the Front Panel Warning After the product is successfully registered on the network, the LEDs illuminate continuously to indicate that the product is active and fully operational. 1. Connect all devices before you plug any power cords into the electrical outlet. Quick Start Guide Electrical Outlet LED 2. Always turn off the product and network devices before you connect or disconnect any cables. 3. Powering On 1. Plug in the AC power adaptor from the power connector to an electrical outlet. 3. Hazardous electrical voltages can exist on the product and peripheral devices and can be present on any connected cables. Operation Power 2. If the power successfully turns on, a white light on the power LED is turned on. Note: Use only the AC power adaptor provided in this product. Using other adaptors may damage the product. Wireless or Wired, it's smooh and seamless AC1200 Dual Band Smart Wi-Fi Router QUANTUM T3 Internet 2. Checking the Mode WPS Your product has the Q-MODE switch. Wireless Check that the switch is set to ROUTER. 4. Connecting the Network Devices Model: QUANTUM T3 Power Input: 12V 1.5A Barcode S/N: QT3YYWWnnnnnn Mac: DCDC8321000001 FCC ID: O6ZT3 Humax Co.,Ltd. HUMAX BLDG., 2, Yeongmun-ro, Cheoin-gu, Yongin-si, Gyeonggi -do,449-934,South Korea Code: 4-00023 Router Login: http://dearmyrouter.net ID: admin Password: nnnn 2.4G/5G SSID: We Love You So Much Password: humax_nnnn 211-170615 D170027211 You can connect your product to the Internet over a direct WAN or through a modem. 1-1 If you access Internet by the modem such as ADSL, VDSL, cable and FTTH, plug one end of the Ethernet cable to the Internet port of your product and the other end to the LAN port of your modem. 1-2 If you access the Internet by WAN broadband, plug the Ethernet cable to the Internet port of your product. Power is on. Off Power is off. White On Internet is connected. White Blinking Firmware update is in progress. Off Internet is not connected. White On Network is connected wirelessly. White Slow Blinking WPS is in configuration. It may take 2 minutes. White Fast Blinking WPS configuration is failed. Blue On *Roaming & mesh network is configured through the Internet. Blue Slow Blinking *Roaming & mesh network is in configuration. It may take 2 minutes. Blue Fast Blinking *Roaming & mesh network configuration is failed. You can connect your network devices to the router over wired or wirelessly. Off Wi-Fi is not available. Use Ethernet cables to connect your devices to the router over a wired Ethernet connection. White On Networking device is connected to the LAN port. Off No device is connected to the LAN port. Ethernet Trade Name/Mark: xxxxxx Full Postal Address: xxxxxx Note: We recommend you to connect entertainment devices such as OTT, gaming console and IPTV to the Entertainment ports. The ports have the priority in transmitting multimedia data without transmission delay or interruption. Designed by Humax (Korea) Made in China ※ Please change Login Password and Wi-Fi Password for Security. 1. Connecting the Internet White On Internet, Wireless, Ethernet Blinking Resetting the system is in progress. Note: Blue light is turned on when the roaming & mesh network is successfully configured over HUMAX products. T3 Router PC Modem Q-MODE Your product supports Q-MODE that enables operating as a router or an extender. Internet It’s very simple to change the operation mode. Just slide the Q-MODE switch to ROUTER or EXTENDER. Then, the mode change is automatically completed. Mobile Phone Gaming Console & Media Sharing Storage Sharing WPS Printer Sharing 1-1 BOTH 1-2 *Roaming Mode *Mesh Mode ROUTER Router Mode WISP Mode EXTENDER AP Mode Repeater Mode Media Bridge Mode Use it as Extender 3. Configuring WPS You can configure WPS between the extender and the router. 3-1 Press the WPS buttons on both devices within 2 minutes. When WPS is successfully configured, the blue light blinks on the Wireless LED. Note: If you use another router other than HUMAX product, the white light blinks on the Wireless LED, which means your extender is in repeater mode. Internet Connection 3-2 Check the network when the connection is complete. If you connect the extender to a HUMAX router, both network names are the same as if they configure a single network. But, if you use a router other than HUMAX products, the network name of your extender will copy the router›s name following Ext2G or Ext5G. (ex. Router_Ext5G) You can configure the network over a wired Ethernet connection or wirelessly. Wired Connect the Ethernet cable between the PC and the LAN port of your product. Wireless 1. Open the web browser. - With HUMAX QUANTUM Series, you will experience seamless Wi-Fi network at any moment. WPS 1. Changing the Mode Your product has the Q-MODE switch. Slide the switch to EXTENDER. 2. Enter http://dearmyrouter.net to the address bar, and then press the Enter key. 2. Powering On - T1, T2, T3, T3A, X1 and X3 support both roaming & mesh network, and T5, T7 and T9 support roaming network only. - Roaming & mesh feature is configured over HUMAX products. (*) Electrical Outlet 3. The default ID and password are admin and nnnn. nnnn is the last 4 digits of serial number. Refer to the serial number at the bottom of your product. Note: We recommend you to change the ID and password to secure your network. Go to Management > Change Password to change your password. Welcome to QUANTUM T3! Model: QUANTUM T3 Power Input: 12V 1.5A http://dearmyrouter.net 192.168.1.1 T3 Extender WPS Scan the QR code to access @@ on your mobile device. Extender has wireless connectivity with a third party router *Roaming & mesh network is configured over HUMAX products ID admin Password **** Login For the default ID and password, see the bottom of the product. Barcode S/N: QT3YYWWnnnnnn Mac: DCDC8321000001 FCC ID: O6ZT3 Humax Co.,Ltd. HUMAX BLDG., 2, Yeongmun-ro, Cheoin-gu, Yongin-si, Gyeonggi -do,449-934,South Korea Code: 4-00023 Router Login: http://dearmyrouter.net ID: admin Password: nnnn 2.4G/5G SSID: We Love You So Much Password: humax_nnnn 211-170615 D170027211 Trade Name/Mark: xxxxxx Full Postal Address: xxxxxx Designed by Humax (Korea) Made in China ※ Please change Login Password and Wi-Fi Password for Security. Network Configuration on Web Page When you log in to the router for the first time, the installation wizard will appear. Then, follow the steps to configure the network. 3. Wireless Network Setting Router Mode Enter your own network name and password to change the default settings. You can secure your wireless network from unauthorized users. 1. Welcome Wireless Setting Click Start. The system will check automatically if your router is connected to the Internet. WISP Mode 2-1. Roaming & Mesh You can use wireless Internet service in Router mode. Just press the WPS buttons on HUMAX products within 1 second. Then, they are connected each other automatically, and configure the mesh network. You will experience seamless Wi-Fi roaming over the mesh network. 1. Log in to dearmyrouter.net, and then go to Management > WISP Mode. 2. Set the WISP mode to On, and select your Internet service provider. Roaming & Mesh Setting Welcone to Quantum T3 ! 2.4GHz This is Quantum T3, Network Name (SSID) Complies with next generation 11ac Wi-Fi standard. Wi-Fi 1200 Mbps - 900 + 300 Mbps speed. Provides WEP 64/128-bit, WPA, WPA2 and WPA-Mixed security. Supports Guest Network, Media Sharing, QoS, Parental Control, VPN, WPS etc. Supports Roaming & Mesh for Mobile Client. Supports Power Saving, LED Control, System Restart for energy saving. WISP Mode 5GHz In this mode, all Ethernet ports are bridged together and the wireless client will connect to ISP access point. The NAT is enabled and PCs in Ethernet ports share the same IP to ISP through wireless LAN. Network Name (SSID) We Love You So Much We Love You So Much Password Network Name (SSID) CH RSSI Security MAC Address Band We Love So Much -45 WPA2-PSK BC:76:70:7C:5C:74 2.4GHz TIANA_89 -47 WPA2-PSK F8:D1:11:5C:84:BA 2.4GHz Next 4. Password Setting • We recommend you to update the firmware to the latest version when available. ASUS -51 WPA2-PSK 70:7C:F8:D1:11:55 2.4GHz Wafya -26 None 11:5C:54:D8:33:98 2.4GHz NETGEAR -51 WPA2-PSK 70:7C:F8:D1:11:55 2.4GHz iptime -77 WEP 5C:74:31:AB:C1:D2 2.4GHz Password Enter your ID and password to change the default password. You can enhance the security on your network environment. Back ********** WPS Start WPS Process... Connect Change Password (Optional) Previous 2. Internet Setting You can connect the Internet automatically or manually depending on your Internet connection type. If you change the password, you can make your network more secure. For the default ID and password, see the bottom of the product. Note: This page appears only when your product is not connected to the Internet. 2-2. Repeater Extender Mode If you have a networking device other than HUMAX products, select it from the list and then enter the password. You will experience stronger and wider Wi-Fi signal. The changed password will be applied from the next login. Login ID Internet Setting If the existing configured, pressing the WPS button on the Mesh Network products and add new products are the closest connection automatically. Copy 2.4GHz password ? About wireless security and password. view more Previous If you want to skip the installation wizard, click Skip. This button is available always during installation wizard. Refresh Select the device and enter the password to connect the host device. Start • Tip! Minimizing the walls, furniture, appliances, etc. to connect between the two products, and the products work best when operating at up to 12m (40 feet) inside and outside. On/Off Password You can more easily set various functions through web UI and experience fabulous router. Do you want to start the wizard for easy setup? Note: HUMAX each other two products that you want to connect to, you can simply Extended Network via the WPS button. Place the product on where to actual use, press the WPS button on your product. Slide the Q-MODE switch to EXTENDER. admin Current Password Repeater Setting New Password Select a device from the list below and enter the password to connect to the host device. Using the WPS button on both devices, you can easily connect them. Retype New Password WPS You can manually configure your connection settings. If you do not know the Internet connection type, please contact your ISP. Connection Type Dynamic IP Previous ٕ Previous T3 operates as an extender, and configures the roaming & mesh network with a HUMAX router. 5. Summary When you complete your network settings, the information on your network will display. ? What is the Dynamic IP/Static IP/PPPoE/PPTP/L2TP? view more Summary Next Internet Connection Type Dynamic IP: The Internet will be connected automatically. Static IP: Enter the IP address, Subnet mask, Gateway and DNS server supplied by the ISP. • PPPoE: Enter the user name and password supplied by the ISP. • PPTP or L2TP: Enter the user name, password and VPN server supplied by the ISP. Wireless 2.4GHz Note: For more information on the Internet connection, refer to the web manual at www.humaxdigital.com/QUANTUM. Dynamic IP IP Address Select the connection type your ISP is using. In most cases, it will be Dynamic IP. • • If you want to configure the network over a wired Ethernet connection, plug the Ethernet cable into the WAN Port of the host device. In this case, the host operates automatically in Bridge mode. WPS Next 100.1.1.1 Network Name (SSID) humax_0000 Network Name (SSID) We Love You So Much Password Previous humax_0000 RSSI Security MAC Address Band -45 WPA2-PSK BC:76:70:7C:5C:74 2.4GHz TIANA_89 -47 WPA2-PSK F8:D1:11:5C:84:BA 2.4GHz WPA2-PSK ASUS -51 70:7C:F8:D1:11:55 2.4GHz Wafya -26 None 11:5C:54:D8:33:98 2.4GHz iptime -77 WPA2-PSK 5C:74:31:AB:C1:D2 5GHz Password Back Done ********** Next 1. Welcome If you configure the network with HUMAX products only, click HUMAX Products and go to 2-1. Roaming & Mesh. If your router is successfully connected to the Internet, the information on the internet connection will display. If you use a third party product other than HUMAX, click Other Products and go to 2-2 Repeater. Welcome to Extended Network Your product has changed to Extender mode. In this mode, you can expand Wi-Fi coverage. If you want to configure the network over a wired Ethernet connection, plug the Ethernet cable into the WAN port of your product. In this case, the product operates automatically in Bridge mode. Internet Setting CH IPTime Zone We Love You So Much Password Wireless 5GHz Network Name (SSID) x T3 works automatically in AP mode if you connect it to a router over a wired Ethernet cable and use a client device wirelessly. x T3 works automatically in media bridge mode if you connect it to a router wirelessly and use a client device over a wired Ethernet cable. x T3 works automatically in repeater mode if you connect it wirelessly to a router other than a HUMAX router and use a client device wirelessly. x If T3 works together with a HUMAX router, the roaming & mesh network is configured over the products. Home After completing the network settings, go to Operation Mode. In this page, you can see the current status of your product. Home This page shows the current status and some basic settings of the device. 2.4G 5G Select a product you want to connect wirelessly. Dynamic IP 100.1.1.1 255.255.255.0 192.168.1.1 0.0.0.0 0.0.0.0 Connection Type WAN IP Address Subnet Mask Gateway Primary DNS Secondary DNS Previous HUMAX Products Dynamic IP 10.10.10.1 Other Products QUANTUM T3 SanULTRA DUAL_1 Internet Next Next Operation Mode Router Mode Connection Status Dynamic IP IP Address 183.99.19.131 Subnet Mask 255.255.255.128 Gateway 183.99.19.129 DNS Server 168.126.63.1/168126.63.2 MAC Address F4:28:53:35:C3:F9 4 Devices
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Create Date : 2017:06:19 15:37:07+08:00 Creator : Adobe InDesign CC 2015 (Windows) Modify Date : 2017:06:19 15:37:07+08:00 XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00 Metadata Date : 2017:06:19 15:31:04+08:00 Creator Tool : Adobe InDesign CC 2015 (Windows) Instance ID : uuid:481e4be8-8c89-4dfb-933a-987161f62a2c Original Document ID : xmp.did:da0bb3f4-4b8b-8747-bf7e-d364c88a7c02 Document ID : xmp.id:e0c4a06e-56bc-7041-bd2a-055271dfee06 Rendition Class : proof:pdf History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CC 2015 (Windows) History Changed : / History When : 2016:09:02 17:53:08+09:00 Derived From Instance ID : xmp.iid:f93c9952-a90d-ce4f-9609-25758bd0b85a Derived From Document ID : xmp.did:da0bb3f4-4b8b-8747-bf7e-d364c88a7c02 Derived From Original Document ID: xmp.did:da0bb3f4-4b8b-8747-bf7e-d364c88a7c02 Derived From Rendition Class : default Format : application/pdf Title : untitled Producer : Acrobat Distiller 9.0.0 (Windows) Trapped : False Page Count : 2EXIF Metadata provided by EXIF.tools