Hunter Engineering 45-1637 Hunter Model 45-1637, Automotive tire tread depth gauge User Manual CERTIFICATE OF COMPLIANCE

Download:
Mirror Download [FCC.gov]
Document ID	3843043
Application ID	/CMYbMhSm4J5csRZR4UbKg==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	47.41kB (592630 bits)
Date Submitted	2018-05-08 00:00:00
Date Available	2018-05-15 00:00:00
Creation Date	2018-05-03 09:45:01
Producing Software	Adobe PDF Library 15.0
Document Lastmod	2018-05-03 09:45:48
Document Title	CERTIFICATE OF COMPLIANCE
Document Creator	Acrobat PDFMaker 15 for Word
Document Author:	Systems Administrator

Rhein Tech Laboratories, Inc.
360 Herndon Parkway
Suite 1400
Herndon, VA 20170
http://www.rheintech.com
Appendix K:
Client: Hunter Engineering Company
Model: 45-1637
Standards: FCC 15.249/IC RSS-210
ID’s: LS3-45-1637/2938A-451637
Report #: 2017285
Manual
Please refer to the following page.
Page 27 of 35
This equipment has been tested and found
to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference when the
equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used
in accordance with the instruction manual, may
cause harmful interference to radio communications.
Operation of this equipment in a residential area is
likely to cause harmful interference in which case the
user will be required to correct the interference at their
own expense.
Changes or modifications not expressly
approved by the manufacturer could void the
user’s authority to operate the equipment.
RISK OF EXPLOSION IF BATTERY IS
REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING
TO THE INSTRUCTIONS.
Tread DepthTool: 221-731-1
Contains FCC ID: LS3-45-1443
IC: 2938A-451443
Specific Precautions/Power Source
North America
The PC aligner is intended to operate from a power
source that will apply 120 VAC (nominal) 50/60 Hz
between the supply conductors of the power cordset.
Other Regions
The PC aligner is intended to operate from a power
source that will apply 230 VAC (nominal) 50/60 Hz
between the supply conductors of the power cordset.
The power supply cordset, supplied with this equipment,
may need modification to allow connection to the power
supply mains. Your Hunter service representative will
install the proper plug for your location.
A protective ground connection, through the
grounding conductor in the power cord, is
essential for safe operation. Use only a power
cord that is in good condition.
FUSING:
To avoid fire hazard, use only the fuse specified
for your product.
Model: 45-1443
-ORContains FCC ID: LS3-45-1637
IC: 2938A-451637
EQUIPMENT SERVICE:
This equipment contains no user serviceable
parts. All repairs must be referred to a qualified
Hunter Service Representative.
Model 45-1637
PROVISIONS FOR LIFTING AND
CARRYING:
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1. this device may not cause harmful interference, and
2. this device must accept any interference received,
including interference that may cause undesired
operation.
This device complies with Industry Canada licenseexempt RSS standard(s). Operation is subject to the
following two conditions:
(1) this device may not cause interference, and (2)
this device must accept any interference, including
interference that may cause undesired operation of the
device.
Le présent appareil est conforme aux CNR d’Industrie
Canada applicables aux appareils radio exempts de
licence. L’exploitation est autorisée aux deux conditions
suivantes: (1) l’appareil ne doit pas produire de
brouillage, et (2) l’utilisateur de l’appareil doit accepter
tout brouillage radioélectrique subi, même si le brouillage
est susceptible d’en compromettre le fonctionnement.
No provision has been made for lifting or carrying
this equipment. The unit must be moved by
rolling it on its casters.
Equipment Specifications
Electrical
VOLTAGE:
AMPERAGE:
WATTAGE:
120/230 volts (nominal)
6/3 amps
720 watts
Atmospherics
TEMPERATURE:
RELATIVE HUMIDITY:
ALTITUDE:
+32°F to +122°F (0°C to +50°C)
Up to 95% Non-condensing
Up to 10,000 ft. (3048 m)
Explanation of Symbols
These symbols appear on the equipment.
18
GETTING STARTED

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Author                          : Systems Administrator
Create Date                     : 2018:05:03 09:45:01-07:00
Modify Date                     : 2018:05:03 09:45:48-07:00
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.6-c015 81.157285, 2014/12/12-00:43:15
Metadata Date                   : 2018:05:03 09:45:48-07:00
Creator Tool                    : Acrobat PDFMaker 15 for Word
Format                          : application/pdf
Title                           : CERTIFICATE OF COMPLIANCE
Creator                         : Systems Administrator
Document ID                     : uuid:2581aaf7-2a22-460c-a0bf-ecf6fa9536cf
Instance ID                     : uuid:f2bd7329-552d-417d-8eab-dc35b48f3a5d
Producer                        : Adobe PDF Library 15.0
Page Count                      : 2

EXIF Metadata provided by EXIF.tools