Hytera Communications PD79XISU1 Is Digital Radio User Manual

Hytera Communications Corporation Limited Is Digital Radio Users Manual

Users Manual

Download: Hytera Communications PD79XISU1 Is Digital Radio User Manual
Mirror Download [FCC.gov]Hytera Communications PD79XISU1 Is Digital Radio User Manual
Document ID3080136
Application IDCK44q1N7vNpQsJzZaCyXXg==
Document DescriptionUsers Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize396.05kB (4950591 bits)
Date Submitted2016-07-28 00:00:00
Date Available2016-07-28 00:00:00
Creation Date2015-09-21 17:54:07
Producing SoftwareAcrobat Distiller 7.0 (Windows)
Document Lastmod2016-07-25 15:57:50
Document TitleMicrosoft Word - [Hytera-I&M-79XIS-001]PD79XIS Instruction Manuals_V1.0
Document CreatorPScript5.dll Version 5.2
Document Author: l00999

File No:HYTERA-I&M-79XIS-001
Rev: V1.0
Date:2015.9.21
Preface
Thanks for your favor in our product. To derive optimum performance from the product, please read this
manual and the supplied Safety Information Booklet carefully before use.
This manual is applicable to the following model:
PD79XIS Digital Portable Radio (X may represent 2, 5, 6 or 8).
Copyright Information
Hytera is the trademark or registered trademark of Hytera Communications Co., Ltd. (the Company) in
PRC and/or other countries or areas. The Company retains the ownership of its trademarks and product
names. All other trademarks and/or product names that may be used in this manual are properties of
their respective owners.
The product describes in this manual may include the Company’s computer programs stored in memory
or other media. Laws in PRC and/or other countries or areas protect the exclusive rights of the Company
with respect to its computer programs. The purchase of this product shall not be deemed to grant, either
directly or by implication, any rights to the purchaser regarding the Company’s computer programs. Any
of the Company’s computer programs may not be copied, modified, distributed, decompiled, or
reverse-engineered in any manner without the prior written consent of the Company.
The AMBE+2TM voice coding technology embodied in this product is protected by intellectual property
rights including patent rights, copyrights and trade secrets of Digital Voice Systems, Inc. This voice
coding technology is licensed solely for use within this product. The user of this technology is explicitly
prohibited from attempting to decompile, reverse engineer, or disassemble the Object Code or in any
other way convert the Object Code into a human readable form.
U.S. Patent No: #6,912,495 B2, #6,199,037 B1, #5,870,405, #5,826,222, #5,754,974, #5,701,390,
#5,715,365, #5,649,050, #5,630,011, #5,581,656, #5,517,511, #5,491,772, #5,247,579, #5,226,084 and
#5,195,166.
Disclaimer
The Company endeavors to achieve the accuracy and completeness of this manual, but no warranty of
accuracy or reliability is given. All the specifications and designs are subject to change without notice
due to continuous technology development. No part of this manual may be copied, modified, translated,
or distributed in any manner without the express written permission of us.
We do not guarantee, for any particular purpose, the accuracy, validity, timeliness, legitimacy or
completeness of the Third Party products and contents involved in this manual.
If you have any suggestions or would like to learn more details, please visit our website at:
http://www.hytera.com.
RF Radiation Information
The radio is not intended for use by general population in an uncontrolled environment. It is only for
occupational use and only applied to work-related conditions.
The radio must be only used by users who are fully aware of the hazards of the exposure and who are
able to exercise control over their RF exposure to qualify for the higher exposure limits.
RF Radiation Profile
Radio Frequency (RF) is a frequency of electromagnetic radiation in the range at which radio signals are
transmitted. RF technology is widely used in communication, medicine, food processing and other fields.
It may generate radiation during use.
RF Radiation Safety
In order to ensure user health, experts from relevant industries including science, engineering, medicine
and health work with international organizations to develop standards for safe exposure to RF radiation.
These standards consist of:
¾
United States Federal Communications Commission, Code of Federal Regulations; 47CFR part 2
sub-part J;
¾
American National Standards Institute (ANSI)/Institute of Electrical and Electronic Engineers (IEEE)
C95. 1-1992;
¾
¾
Institute of Electrical and Electronic Engineers (IEEE) C95. 1 – 1999;
International Commission on Non-Ionizing Radiation Protection (ICNIRP) 1998;
FCC Regulations
Federal Communication Commission (FCC) requires that all radio communication products should meet
the requirements set forth in the above standards before they can be marketed in the U.S, and the
manufacturer shall post a RF label on the product to inform users of operational instructions, so as to
enhance their occupational health against exposure to RF energy.
Operational Instructions and Training Guidelines
To ensure optimal performance and compliance with the occupational/controlled environment RF energy
exposure limits in the above standards and guidelines, users should transmit no more than 50% of the
time and always adhere to the following procedures:
Your radio radiates measurable RF energy only while it is transmitting (during talking), not when
it is receiving (listening) or in standby mode.
EU Regulatory Conformance
As certified by the qualified laboratory, the product is in compliance with the essential requirements and
other relevant provisions of the Directive 1999/5/EC. Please note that the above information is
applicable to EU countries only.
Contents
1. Documentation Conventions .............................................................................................................7
1.1 Instructional Icons ...........................................................................................................................7
1.2 Notational Conventions ...................................................................................................................7
1.3 Key Operation .................................................................................................................................7
2. Intrinsically Safe Radio Information .................................................................................................8
2.1 Equipment marking .........................................................................................................................8
2.2 No Misoperations ............................................................................................................................8
2.3 Safety Instructions ..........................................................................................................................9
2.4 Specifications ..................................................................................................................................9
2.5 Compliance Standards..................................................................................................................10
3. Items in the Package ........................................................................................................................12
4. Product Introduction ........................................................................................................................13
4.1 Product Controls ...........................................................................................................................13
4.2 Programmable Keys .....................................................................................................................14
5. Before Use ........................................................................................................................................16
5.1 Charge the Battery ........................................................................................................................16
5.2 Assembling Accessories ...............................................................................................................17
5.2.1 Assembling the Antenna .....................................................................................................17
5.2.2 Assembling the Battery .......................................................................................................17
5.2.3 Assembling the Belt Clip .....................................................................................................18
5.2.4 Attaching Audio/Programming Cable ..................................................................................19
6. Status Indication ..............................................................................................................................21
6.1 LCD Icon .......................................................................................................................................21
6.2 LED Indicator ................................................................................................................................21
7. Menu Navigation ...............................................................................................................................23
8. Basic Operations ..............................................................................................................................24
8.1 Powering On/Off ...........................................................................................................................24
8.2 Registering ....................................................................................................................................24
8.3 Adjusting the Volume ....................................................................................................................24
8.4 Locking/Unlocking the Keypad ......................................................................................................24
8.5 Selecting a Subgroup....................................................................................................................25
8.6 Selecting a Group Contact ............................................................................................................25
9. Call .....................................................................................................................................................27
9.1 Private Call ...................................................................................................................................27
9.1.1 Initiating a Call ....................................................................................................................27
9.1.2 Receiving a Call ..................................................................................................................28
9.1.3 Voice Communication .........................................................................................................28
9.1.4 Conversation Limit ..............................................................................................................28
9.1.5 Ending a call .......................................................................................................................28
9.2 PSTN/PABX Call...........................................................................................................................29
9.2.1 Initiating a Call ....................................................................................................................29
9.2.2 Receiving a Call ..................................................................................................................30
9.2.3 Voice Communication .........................................................................................................30
9.2.4 Conversation Limit ..............................................................................................................30
9.2.5 Ending a call .......................................................................................................................30
9.3 Group Call .....................................................................................................................................30
9.3.1 Initiating a Call ....................................................................................................................30
9.4 One Touch Call .............................................................................................................................33
9.5 Emergency Call ............................................................................................................................33
9.5.1 Initiating a Call ....................................................................................................................34
9.5.2 Receiving a Call ..................................................................................................................34
9.5.3 Voice Communication .........................................................................................................34
9.5.4 Ending a call .......................................................................................................................34
9.6 Queue Call ....................................................................................................................................34
9.7 Time-out Timer (TOT) ...................................................................................................................35
10.3.2 CPS-P3 dialing rule ..........................................................................................................37
10.8 LQO ............................................................................................................................................40
10.9 Hunt ............................................................................................................................................40
10.9.1 TSCC Hunt .......................................................................................................................40
10.9.2 Hunt for Smooth Communications ....................................................................................43
10.10 Encrypt ......................................................................................................................................44
10.11 Authentication ...........................................................................................................................44
10.12 Covert Mode .............................................................................................................................45
10.13 Man Down (optional) .................................................................................................................45
10.14 Rent ..........................................................................................................................................45
10.15 Priority .......................................................................................................................................45
10.18 GPS ..........................................................................................................................................47
11. Troubleshooting .............................................................................................................................49
12. Care and Cleaning ..........................................................................................................................51
1. Documentation Conventions
For your better understanding of this manual, please read the following conventions first.
1.1 Instructional Icons
Icon
Note
Caution
Description
Indicates references that can further describe the related topics.
Indicates situations that could cause data loss or equipment damage.
1.2 Notational Conventions
Convention
“”
Description
The quotation marks enclose the name of a software interface element.
For example, click “OK”.
The text in boldface denotes the name of a hardware button. For example,
Bold
press the PTT key.
The symbol directs you to access a multi-level menu. For example, to
->
select “New” from the “File” menu, we will describe it as follows: File ->
New.
1.3 Key Operation
Operation
Definition
Short press
To press a key and release it quickly.
Long press
To press a key for the preset time (2s by default) and release it.
Hold
To press a key and do not release it.
2. Intrinsically Safe Radio Information
2.1 Equipment marking
FM/CAN
Class I, Zone 0 AEx/Ex ia IIC T4 Ga
II 1G Ex ia IIC T4
II 1D Ex ia IIIC T120℃ IP6X
I M1 Ex ia
Ex ia IIC T4 Ga
Ex ia IIIC T120℃ Da IP6X
Class I,II,III Div1 Group A,B,C,D,E,F,G T120℃
ATEX
IECEx
Ex ia I Ma
2.2 No Misoperations
Stop operating this product and leave the explosive atmosphere immediately when the safety or integrity
of the product is endangered, and deliver it to your local dealer for examination.
These items may endanger the product’s safety or integrity:
z The radio is stored improperly;
z The radio is faulty;
z The radio works with overload;
z The radio’s operational error or threshold value is out of allowed range.
z The radio is damaged during transportation;
z The radio’s housing is obviously damaged or cracked;
z The radio logo or model is hard to be recognized;
2.3 Safety Instructions
Caution
To protect you against any property loss, bodily injury or even death, be sure to observe the following
safety instructions:
z Use only the Ex-battery BL1813-Ex and BL2413-Ex specified by the Company. The use of other
batteries may result in Ex-protection failure.
z Charge the battery in a non-hazardous area only with the designated charger.
z Use the accessories specified by the Company only.
z Do not carry any standby battery into a hazardous area.
z Do not use a damaged antenna. If a damaged antenna comes into contact with your skin, a minor
burn may result.
z Do not expose the radio to direct sunlight for a long time, nor place it close to a heating source.
z Hold the radio upright and keep its microphone 2.5 to 5 centimeters away from your mouth during
use.
z If you wear a radio on your body, ensure its antenna is at least 0 centimeters away from your body
during transmission.
z Please do not use the radio out of the operating temperature range specification of this product.
z Do not disassemble the radio or replace the accessories in a hazardous area.
z Do not remove the battery from the radio in a hazardous area.
z Do not attempt to repair and service the radio, batteries and its accessories. Please contact your
dealer for repair and servicing.
z Do not dissemble or redo the radio. Unauthorized modification of the radio may result in termination
of Ex-protection (intrinsic safety) of the radio.
z Improper usage of the product other than it is intended to be used for will impair safety of the product,
yourself and surrounding environment.
2.4 Specifications
Item
Specifications
Rated Operating Voltage
DC 7.4V
Max. Operating Voltage
DC 8.4V
Max. Operating Current
1.8A
Weight (with standard antenna
& battery)
About 498g
Sensitivity
0.70 μV/(V/m)2 to 0.85 μV/(V/m)2
RF Power Output
1W
Rated Audio Power Output
0.5W
Audio Distortion
3%
Ambient Temperature
-30℃–+50℃
Storage Temperature
-40℃–+85℃
Charging Temperature
0℃–+40℃
Battery
Ex-battery BL1813-Ex (1800mAh) / BL2413-Ex (2400mAh)
Battery Life
About 14 hours (5-5-90 duty cycle)
Charging Time
About 4 hours
2.5 Compliance Standards
Standard
Issue Date
FM
FM Class 3600
2011
FM Class 3610
2010
FM Class 3810
2005
ANSI/IEC-60529(Ed. 4.0)
2004
ANSI/ISA-60079-0(12.00.01)
2009
ANSI/ISA-60079-11(12.02.01)
2012
ANSI/ISA-61010-1(82.02.01)
2004
CAN
CAN/CSA-C22.2 No.0-M91
2006
CAN/CSA-C22.2 No.142-M1987
2009
CAN/CSA-C22.2 No.213-M1987
2008
Standard
Issue Date
CAN/CSA-C22.2 No.60079-0 (Ed. 5.0)
2011
CAN/CSA-C22.2 No.60079-11 (Ed. 5.0)
2011
CAN/CSA-C22.2 No.60529 (Ed. 5.0)
2005
CAN/CSA-C22.2 No.61010-1 (Ed. 2.0)
2009
ATEX
EN 60079-0 (Ed. 5.0)
2009
EN 60079-11 (Ed. 6.0)
2012
EN 60529+A1 (Ed. 2.0)
1992
IECEx
IEC-60079-0 (Ed. 5.0)
2007
IEC-60079-11 (Ed. 6.0)
2011
IEC-60529 (Ed. 2.1)
2001
3. Items in the Package
Please unpack carefully and check that all items listed below are received. If any item is missing or
damaged, please contact your dealer.
Portable Radio
Battery
Charger
Power Adapter
Antenna
Belt Clip
Strap
Documentation Kit
Note
And the frequency band is marked on the label of antenna; if not, refer to the label on the radio for
frequency band information.
4. Product Introduction
This section introduces the mechanical structure and the programmable key features of this product.
4.1 Product Controls
No.
Part Name
No.
Part Name
○
SK1 (Side Key 1)
11
○
LED Indicator
○
PTT Key
12
○
Antenna
○
SK2 (Side Key 2)
13
○
○
TK (Top Key)
14
○
Accessory Jack
○
Group Call Selector Knob
15
○
Back/Subgroup Key
○
Microphone
16
○
Up Key
○
LCD Display
17
○
Down Key
○
OK/Menu Key
18
○
Battery latch
○
Speaker
19
○
Belt clip
10
○
Numeric Keypad
20
○
Battery
Power
On-Off/Volume
Knob
Control
4.2 Programmable Keys
For enhanced convenience, you may request your dealer to program the keys SK1, SK2, and TK as
shortcuts to the functions listed below. For detailed introductions of the functions, see the chapter
“Functions and Operations”.
No.
Programmable Features
Description
On-hook
To disconnect the call.
Keypad Lock
To lock or unlock the keypad quickly.
Adjust Power Level
To adjust Tx power level quickly.
Private Contact List
To access the menu “Contact List” quickly.
Current Subgroup Contact
To access the menu “Subgroup” quickly.
Call Log
To access the menu “Call Logs” quickly.
Operation Mode
To access the menu “Mode” quickly.
Hunt Mode
To access the menu “Hunt” quickly.
Manual Current Hunt
To hunt and make a registration again.
10
Background Hunt
To enable or disable the background hunt feature.
11
HomeStation Hunt
To enable or disable the home-station hunt feature.
12
Multi-site Handover
To enable or disable the multi-site handover feature.
13
Encrypt
To enable or disable the encryption feature.
14
LQO
To enable or disable LQO.
15
Covert Mode
To enable or disable the Covert mode.
16
Emergency On
To make an emergency call for help in emergent situations.
17
Emergency Off
To end the emergency call.
18
Battery Power Indicator
To check the battery power.
19
Man Down
To enable or disable the man down function.
20
Message
To access the menu “Message” quickly.
21
ReDial Call
To call the last person you have contacted.
22
BackDial Call
To call the last person who has contacted you.
23
Operation Mode Switch
To switch the operation mode of the radio.
No.
Programmable Features
Description
24
One Touch Call 1-5
To call or to send a message to the preset contact quickly.
25
VOX
To enable or disable the VOX feature.
Note
¾
Long and short press of a key can be assigned with different functions by your dealer.
¾
The TK key is programmed as the Emergency On/Off key by default, and is programmable by
your dealer.
5. Before Use
5.1 Charge the Battery
Use only the charger and battery specified by the company. Charger LED can indicate the charging
status, as introduced in the table below. The following figure shows the steps for charging.
Step 1 Connect the power adapter to AC socket. See arrow ①.
Step 2 Plug the power adapter into the rear jack of the charger. See arrow ②.
Step 3 Place the radio with the battery attached, or the battery alone, into the charger. See arrow ③.
During charging, the LED on the charger will indicate the charging status. The charging status begins
when the charger LED glows red. When charging is complete, the charger LED glows green.
See the following table for details.
Note
¾
To achieve optimal battery performance, please charge the battery for 5 hours before initial use.
¾
Be sure to read the Safety Information Booklet, to get necessary battery safety information.
LED
Charging Status
The LED flashes red slowly.
Standby
The LED glows red.
Charging
The LED glows orange.
90% charged
The LED glows green.
Fully charged
LED
The LED flashes red rapidly.
Charging Status
Failure
5.2 Assembling Accessories
5.2.1 Assembling the Antenna
Turn the antenna clockwise to fasten it.
To remove the antenna, rotate it counter-clockwise.
5.2.2 Assembling the Battery
Step 1 Align the battery slots with the guide rails on the radio, and push the battery ②.
4.3 Attaching the Battery
1.
Align the battery slots with the guide rails on the terminal, and push the battery as ○
2 shows.
2.
Open the battery latch and hold it down until the metal lock goes into the battery housing
completely.
3.
Push the battery until it is fully fitted into the slot, and then release the battery latch.
4.
Note:
To remove the battery, please power off the terminal first. Then open the battery latch, and slide the
battery out while holding down the battery latch.
5.2.3 Assembling the Belt Clip
Step 1 Remove the screws on the back of the radio, as shown in the following figure.
Step 2 Align the screws with the screw holes in the belt clip and on the radio’s back, and then tighten
the screws.
To remove the belt clip, loosen the screws.
5.2.4 Attaching Audio/Programming Cable
Step 1 Open the accessory jack cover as the arrow shows.
Step 2 Align the plug with the accessory jack.
Caution
¾
When aligning, make sure not to scrape the silica gel surrounding the accessory jack
screw hole, in order to ensure the waterproof performance of the radio.
¾
Be sure to align the screw on the accessory connector to the screw hole in the jack
before fastening the screw.
Step 3 Tighten the screw on the connector.
To remove the accessory connector, loosen the screw.
6. Sta
atus Indica
ation
6.1 LCD Icon
Icon Name
Operation
Mode
Icon
Icon
Radio Sttatus
TM
MO
Mode:
In
this
mode,
this
product
com
mmunicates with other radios or sy
ystems via
the
e trunking syystem.
No signal.
RSSI Icon
Mo
ore bars indiccate better ssignal streng
gth.
New
w message//unread messsage.
Message Icon
InB
Box is full.
Hunt status (T
This icon d
does not indicate the
Hunt Icon
ckground
bac
hunt,
hom
mestation
hunt
and
mu
ulti-site handover.)
Roam Icon
The
e radio is roa
aming.
Low
w TX power for the curre
ent channel.
TX Powerr Icon
Hig
gh TX powerr for the currrent channel.
Battery
Strength
Icon
Mo
ore bars indiccate more b
battery powe
er.
Speaker Iccon
The
e speaker iss unmated.
VOX Icon
VO
OX is active.
Accessoryy Icon
An accessory is
i connected
d.
The
e GPS featu
ure is active, and valid GPS
data is
rec
ceived.
GPS Icon
The
e GPS featture is activve, but no valid GPS
datta is received.
6.2 LED Indicaator
The top LE
ED will help you
y easily id
dentify the cu
urrent radio status.
LED Indication
The LED flashes
green.
The LED flashes
green slowly.
The LED glows
green
The LED glows
red
The LED flashes
red.
The LED flashes
orange rapidly.
The LED flashes
orange slowly.
Radio Status
Powering on
Standby
Receiving
Transmitting
Making a call (the LED flashes on the calling radio).
Making a FOACSU private call (the LED flashes on the called radio).
Hunting
The LED glows
No voice is being transmitted or received on the channel after a call is
orange.
established. Within such period, you can hold the PTT key to talk.
7. Menu Navigation
The following figure outlines your radio’s menu structure. You can personalize menu options displayed in
the radio via your dealer.
To select and confirm the options shown in the menu, press the Menu key to enter the main menu, and
then press the Up/Down key to select your wanted option, finally press the OK key.
This radio supports menu reset function. If you do not operate the menu for a predefined time period, the
radio will automatically return to the home screen. You can define the reset time or cancel the reset
feature via your dealer.
8. Basic Operations
8.1 Powering On/Off
Rotate the Power On-Off/Volume Control knob clockwise/counter-clockwise until a click is heard to
turn the radio on/off.
8.2 Registering
For proper work, the radio will register with a proper base station automatically after powering on.
Hunting the control channel
Before registering, the radio will hunt through the control channels for available base stations.
Step 1 The radio will start hunting automatically after powering on.
There are two hunting plans available. For details, see “Hunt” in “Functions and Operations”
chapter. You need to preset the hunt plan by your dealer. The two hunt plans are:
z Fixed Control Channel
z Flexible Control Channel
Step 2 During the hunt, both the prompt “Registering, Please Wait!” and the icon appear on the LCD,
and the LED flashes orange slowly.
Making a registration
Step 1 When hunting signals of the base station, the radio determines whether the base station allows
it to register.
Step 2 After registering successfully, the radio will display the prompt “Registered Successfully!” on the
LCD. Then it is ready for use. If you want the radio to register with another base station, press
the programmed Manual Current Hunt key to hunt again.
Note: It is highly recommended to put the frequently used frequencies of base stations in the control
channel list via your dealer.
8.3 Adjusting the Volume
After turning on the radio, rotate the Radio On-Off/Volume Control knob clockwise to increase the call
volume and group number notifying volume, or counter-clockwise to decrease them.
8.4 Locking/Unlocking the Keypad
When the keypad is not in use, you can lock it through any of the methods below to prevent accidental
keypad operation.
z Combined Function Key
Use “OK+
” to lock or unlock the keypad.
z Programmable Keys
Press the programmed Keypad Lock key to lock or unlock the keypad.
z Menu Selection
Go to “Settings -> Radio Set -> Keypad Lock”, and then select “Enable” or “Disable”.
¾
Enable: The keypad will be locked automatically if no operation is made within the preset time
period.
¾
Disable: The keypad will not be locked automatically. However, you can lock or unlock the keypad
via the key combination or Keypad Lock key mentioned above.
Note: When the feature “Keypad Auto Lock” is enabled, the keypad will be locked automatically if no
operation is made within the preset time period. You can use the “Disable" option in the menu “Keypad
Lock” to deactivate the Keypad Auto Lock feature.
8.5 Selecting a Subgroup
You can include your desired group call contacts into a subgroup for efficient management. The radio
supports up to 32 subgroups, each with a maximum of 16 group call contacts.
You may select a subgroup through any of the following methods:
z Menu
Go to the menu “Subgroup -> Members -> Group Call”, Afterwards, select “Set Default” and press the
OK key to switch to that subgroup.
z Shortcuts
In the home screen, directly press the Subgroup key to enter the subgroup menu and select the
subgroup.
Note: This radio supports only one subgroup list which can contain 32 subgroups at most.
8.6 Selecting a Group Contact
Operation
After the radio is powered on and makes a registration successfully, you may select a group call contact
through any of the following methods:
z Knob
Rotate the Group Call Selector knob to select your desired group call contact. An audio alert and
the prompt “No Group Program” will be given in case of no group call contact preset for this knob.
z Menu
Go to the menu “Subgroup -> Members -> Group Call”, and press the Up /Down key to select the
group call contact.
z Shortcuts
You can press the programmed Group Call List key to access the group call list, and select the
group call contact by pressing the Up/Down key.
Group Call Attribute
Group call attribute means the attribute of a group that the group call contacts are in. It is set by the
dealer. This radio supports four group call attributes: Background, Response, Participant and Radio ID.
You can only find and call the contacts of Participant and Response in the subgroup member list, and
receive group calls from the Response, Participant and Background. To receive different attributes of
group calls, you need to have different configurations to the radio as listed below:
Note: When the Radio ID is selected by the Group Call Selector knob, the radio can receive any
group call made by the available group call contacts.
Group Call
Attribute
Settings
If the group call contact is available in the subgroup member list, the radio can
Response
receive the group calls made to this group without any operation by the Group
Call Selector knob.
Only when the Participant group call contact or the Radio ID is selected by the
Participant
Group Call Selector knob, can the radio receive the group calls made to this
group.
Background
This group call contact is unavailable. Only when this group call contact is preset
by the dealer, can the radio receive the group calls to this group.
9. Ca
all
To ensure optimal
volu
ume of the re
eceiving rad
dio, keep the
e microphone
e approxima
ately 2.5 to 5
centimeterss away from
m your mouth
h.
Note: Once
the rad
dio hasn’t ma
ade a registtration or no group call contact
is preset for the Group Calll
Selector kn
nob, the rad
dio cannot make
a call.
9.1 Private Caall
Private call supports tw
wo call typess, FOACSU and OACSU
U, configured by the trun
nking system
m.
z FOACS
SU: During call setup, the calling rad
dio rings. Th
he called parrty answers the call man
nually.
z OACSU
U: During call setup, the calling radio
o does not ring.
The called party an
nswers the call
automatically.
9.1.1 In
nitiating a Call
When the radio
transm
mits a private
e call, the ico
on
will appear on
n the LCD. T
The ring indic
cation is
given until the
t called pa
arty answers this call. You
Y may tran
nsmit a priva
ate call throu
ugh any of the following
methods.
Contact List
L or Calll Logs
Step 1 En
nter the Contact List (pa
ath: “Menu ->
> Contact ->
> Contact Lisst”) or Outgo
oing/Incomin
ng/Missed
Ca
alls (path: “M
Menu -> Calll Logs”).
Step 2 Us
se the Up/Do
own key to select the private call co
ontact you want
to call.
Step 3 Press the
TT key to ma
ake a call.
or the PT
ReDial orr BackDiall Call Log
Step 1 In the home sc
creen, presss the
or
key to accesss the appro
opriate call lo
og.
Step 2 Us
se the Up/Do
own key to select the private call co
ontact you want
to call.
Step 3 Press the
TT key to ma
ake a call.
or the PT
Manual Dial
Step 1 In the home sc
creen, inputt a private ca
all number using
the keyypad. See “M
Manual Dial” in
unctions and
d Operations” chapter fo
or the range
e of private call
c number.
“Fu
Step 2 Press the
T key or
key, PTT
key to make
a call..
Missed Call
C Screen
Press the PTT
P key in th
he “Missed Call”
screen
n to directly call
c back the
e last missed
d private call contact, orr
press the
key or
o the PTT ke
ey to call ba
ack when vie
ewing that ca
all number.
9.1.2 Reeceiving
g a Call
FOACSU Private Call
When a privvate call arrrives, both ring and vibra
ation indication will be given, with th
he icon
on the LCD
D as well. Yo
ou may press the
call, and the
e radio will display
the iccon
the radio will
w display th
he icon
displayed
y within the preset time period to an
nswer the
or PTT key
. An alert tone will
w be given as well. If yo
ou don’t answer this calll,
to remind you.
OACSU Private
Ca
all
The call is established
automaticallly. The icon
will ap
ppear on the
e LCD when this call is established
successfully.
9.1.3 Vo
oice Com
mmunica
ation
After a private call is esstablished, either
the ca
alling party or
o the called party can trransmit a vo
oice call onlyy
k is free with
w the LCD displaying “PTT
“
Enable
ed!”. The rad
dio will displa
ay the icon
if the PTT key
transmissio
on and the iccon
during
upon
receiptt respectively.
9.1.4 Co
onversattion Limit
When a privvate call is established,
both the ca
alling party and
a the calle
ed party will d
display the call
c duration
in a real-tim
me way. See
e the followin
ng figure.
z At the calling
party
The calling party wiill display the
e total allow
wed time for a call in a way
w of countiing down. Th
his time
med by your dealer. The call will be ended
when
n its duration
n exceeds th
he preset
period iss programm
time.
party
z At the called
The called party willl display the
e actual com
mmunication time.
9.1.5 En
nding a call
The voice communicat
tion will be te
erminated when
one of the following
g situations occurs:
z Neither of the partie
es holds dow
wn the PTT key to talk within
the pre
eset time.
time
e preset by the
t dealer.
z The call duration exxceeds the allowed
he calling pa
arty or the ca
alled party ends
the in-p
progress calll.
z Either th
z Signal of
o base station is missin
ng.
z Either th
he calling pa
arty or the ca
alled party selects
an em
mpty group by the Grou
up Call Sele
ector knob.
z A pre-em
mptive call or
o emergenccy call occup
pies the currrent channel.
9.2 PSTN/PAB
BX Call
The radio can
c make an
nd receive a PSTN/PAB
BX call. Since PSTN calll has the sam
me calling process
with
PABX call, the following operationss are based on the PST
TN call.
9.2.1 In
nitiating a Call
When the radio
transm
mits a PSTN call, the icon
wiill appear. The ring indiccation will be
e given until
the called party
answers this call. You
Y may tra
ansmit a PST
TN call throu
ugh any of the following
g methods.
Contact List
L or Calll Logs
Step 1 En
nter the Contact List (pa
ath: “Menu ->
> Contact ->
> Contact Lisst”) or Outgo
oing/Incomin
ng/Missed
Ca
alls (path: “M
Menu -> Calll Logs”).
Step 2 Us
se the Up/Do
own key to select the PSTN
contac
ct you want to
t call.
Step 3 Press the
or PTT key
k to make a PSTN call.
ReDial orr BackDiall Call Log
Step 1 In the home sc
creen, presss the
key to accesss the appro
opriate call lo
og.
or
Step 2 Us
se the Up/Do
own key to select the PSTN
contac
ct you want to
t call.
Step 3 Press the
k to make a PSTN call.
or PTT key
Manual Dial
Step 1 In the home sc
creen, inputt a number using
the key
ypad accord
ding to eithe
er of the follo
owing
e “Manual Dial”
in “Func
ctions and Operations”
cchapter).
schemes. (Forr details, see
PS-P3 Dialin
ng: 01 + PST
TN number.
z CPS-P/CP
z 1343-E Dialing: *01* + PSTN num
mber.
Note
To make a PABX call, enter the nu
umber according to eith
her of the following sche
emes.
¾
CPS-P
P/CPS-P3 Diialing: 02 + PABX
numb
ber.
¾
1343-E
E Dialing: *02* + PABX number.
Step 2 Press the
T key or
key, PTT
a PSTN
call.
key to transmit
Missed Call
C Screen
Hold the PT
TT key in the
e “Missed Call”
screen to
t directly ca
all back the last missed PSTN call contact,
or
press the
or the
e PTT key to
o call back when
viewing
g that call nu
umber.
9.2.2 Reeceiving
g a Call
When a PS
STN call arrivves, both rin
ng and vibration indicatio
on will be givven, with the
e icon
on the LCD
D as well. Yo
ou may press the
displayed
or PTT key
y within the preset time period to an
nswer the
call.
c is established, the ra
adio will disp
play the icon
When the call
don’t answe
er this call, the
t radio willl display the
e icon
. Ring alert will be given as we
ell. If you
ou.
to remind yo
9.2.3 Vo
oice Com
mmunica
ation
When a PS
STN call is established,
you can talkk by holding the PTT keyy. When transmitting the
e voice, the
radio canno
ot receive th
he voice of th
he PSTN usser.
9.2.4 Co
onversattion Limit
When a PS
STN call is established,
the calling party
will display the calll time presett by the dea
aler in a way
of counting down. The called partyy will displayy the actual communicat
tion time.
The call willl be ended when
its durration excee
eds the preset time.
9.2.5 En
nding a call
The voice communicat
tion will be te
erminated when
one of the following
g situations occurs:
z The call duration is over the allowed time preset
by the
e dealer.
he calling pa
arty or the ca
alled party ends
the in-p
progress calll.
z Either th
z A pre-em
mptive call or
o emergenccy call occup
pies the currrent channel.
z The rad
dio switches its operation
n mode via the menu.
z Either th
he calling pa
arty or the ca
alled party selects
an em
mpty group by the Grou
up Call Sele
ector knob.
z Either of
o the partiess turns off th
he radio or lo
ogs out of th
he system.
z Signal of
o base station is missin
ng.
9.3 Gro
oup Calll
Group call includes general group call and bro
oadcast grou
up call. In a general group call, both
h the calling
he called pa
arty can spea
ak. However, in a broad
dcast call, on
nly the callin
ng party can speak,
party and th
while the ca
alled party iss able to listten to it onlyy.
The radio cannot
make
e a broadcasst group calll unless the dealer authorizes it.
As these tw
wo types of group
calls have
the sam
me operations in genera
al, we will on
nly detail the
eir
differencess in the follow
wing section
n.
9.3.1 In
nitiating a Call
When the radio
transm
mits a group call,
the icon
any of the following
me
ethods.
will appear. You
u may transmit a group call through
Transmitting a calll to the pre
eset conta
act
In the home
e screen, prressing the PTT
P key will transmit a group
call to
o the group ccall contact the Group
Call Selecttor knob turrns to.
Group Co
ontact
Step 1 In the home sc
creen, presss the Menu key
k and then
n select the “Subgroup” menu, or diirectly presss
e Subgroup
p key to ente
er the “Subg
group” menu
u.
the
Step 2 Go
o to “Subgro
oup -> Memb
bers”.
Step 3 Us
se the Up/Do
own key to select the group call contact you wa
ant to call.
or PTT key to make a group
call.
Step 4 Press
ou can also select
the “G
General Group Call” as the
t “Call Typ
pe”, and the
en press the OK key,
Yo
key or the
t PTT keyy to make the call.
Note
To make a broadcast group call, select
the “B
Broadcast Group Call” as the “Call Type”,
and
press the OK
O key,
key or the
t PTT key
y.
ReDial orr BackDiall Call Log
Step 1 In the home sc
creen, presss the
ess the apprropriate call log.
key to acce
or
Step 2 Us
se the Up/Do
own key to select the group call contact you wa
ant to call.
Step 3 Press the
k to make
e a general group
call.
or PTT key
ou can also select
the “G
General Group Call” as the
t “Call Typ
pe”, and pre
ess the OK key,
Yo
or the PTT keyy to make th
he call.
Note
To make a brroadcast gro
oup call, sele
ect the “Broa
adcast Grou
up Call” as th
he “Call Typ
pe”, and
press the OK
K key,
key or the PTT key.
Manual Dial
Step 1 In the home sc
creen, inputt a group calll number us
sing the keypad. See “M
Manual Dial” in
unctions and
d Operations” chapter fo
or the range
e of group ca
all number.
“Fu
z General group call: grroup call num
mber
S-P and CPS
S-P3 dialing
g schemes, input *11*+ group
call
z Broadcastt group call: In both CPS
number.
Step 2 Press the
key, PTT
T key or
key to make a call.
9.3.2 Reeceiving
g a Call
You can receive a grou
up call witho
out any operration and th
he radio will display the icon
be given ass well.
. Ring alert will
9.3.3 Late Entry
After a group call is established, other group members are allowed to join it without any operation.
The late entry feature is used in the following situations:
z The called party is not in the group operation range until the group call is established.
z The called party is not powered on until the group call is established.
z During the initiation of the group call, the called party is in another call (a private call or a group call).
When the call is over, the group call is still on.
z During the initiation of the group call, the called party is within poor signal coverage or is
encountering with the radio interference, and the signal gets better during the group call.
z A new member joins when the group call is established.
9.3.4 Voice Communication
z General Group Call: After the call is established, either the calling party or the called party can
transmit a voice call only if the PTT key is free with “PTT Enabled!” displayed on the LCD. The radio
will display the icon
upon transmitting and the icon
upon receipt respectively.
z Broadcast Group Call: After the call is established, only the calling party can talk by holding the PTT
key. When transmitting the voice, the calling party will display the icon
on the LCD. As for the
called party, it can only receive voice.
9.3.5 Conversation Limit
When a general group call is established, both the calling party and the called party will display the call
duration in a real-time way. See the following figure.
z At the calling party
The calling party will display the total conversation time for the call in a way of counting down the total
allowed time. This time period is programmed by your dealer. The call will be ended when its duration
exceeds the preset time.
z At the called party
The called party will display the actual conversation time. The timer will start counting once the called
party joins the group call. If the called party takes the initiative to exit from this call and then rejoins it
later, recount will be initiated.
9.3.6 Ending a call
General Group Call
The voice communication will be terminated when one of the following situations occurs:
z Neither of the parties holds the PTT key to talk within the preset time.
z The call duration exceeds the allowed time preset by the dealer.
z The calling party ends the in-progress call.
z Signal of base station is missing.
z A pre-emptive call or emergency call occupies the current channel.
Note:
If you hold the PTT key while some one is speaking, your radio will keep beeping, alerting you to
transmission prohibition. To stop beeping, please release the PTT key. When the PTT is free, you
can hold the PTT key to transmit.
Broadcast Group Call
The call will be terminated when one of the following situations occurs:
z The call duration exceeds the allowed time preset by the dealer.
z The calling party ends the in-progress call.
z Signal of base station is missing.
z A pre-emptive call or emergency call occupies the current channel.
9.4 One Touch Call
You dealer can set 5 One Touch Call shortcuts at most for you. This feature is used for calling the
contact or sending the message quickly. The contact, call type and the message contents are all preset
by the dealer.
Operation: To initiate a call or send a message, press the programmed One Touch Call key.
9.5 Emergency Call
In case of an emergency, you can use the feature to ask for help from your companion or control center.
Emergency call is the highest-priority call which can disconnect any ongoing normal calls.
Only when the radio is authorized to emergency call, can it transmit such calls.
9.5.1 In
nitiating a Call
When the radio
transm
mits an emergency call, the
t icon
will appear. You mayy transmit an
emergencyy call through
h any of the following methods.
Shortcuts
Press the programmed
d Emergenc
cy On key to
o transmit an
n emergencyy call to the called party
y configured
by the dealer.
Man Dow
wn Triggerr
Man Down alarm will trrigger an em
mergency ca
all to the called party sett by the dealler.
Manual Dial
Step 1 In the home sc
creen, inputt “*9* + the number
you want to call (e.g.: *9*80
0020200)” us
sing the
keypad.
Step 2 Press the
key, PTT
T key or
an emergency call.
key to transmit
9.5.2 Reeceiving
g a Call
When an emergency call
c arrives, you
y can answer it withou
ut any opera
ation.
9.5.3 Vo
oice Com
mmunica
ation
After an em
mergency ca
all is establisshed, either the calling party
or the called
party can speak only
if the
PTT key is free with “P
PTT Enabled
d!” displayed
d on the LCD
D. The radio will display the icon
on and the iccon
transmissio
during
upon
receipt respectively
y.
9.5.4 En
nding a call
The emergency call will be termina
ated when one
o of the following situa
ations occurrs:
time
e preset by the
t dealer.
z The call duration exxceeds the allowed
he emergency call is ma
ade to the group contac
ct, the calling
g party endss the call or exits
the
z When th
Emerge
ency mode.
z Signal of
o base station is missin
ng.
z When th
he emergency call is ma
ade to the private call co
ontact, both parties end the call or exit
e the
Emerge
ency mode.
Note: Both
calling party
and th
he called parrty adopt diffferent metho
od to exit the
e Emergenc
cy mode.
¾
Calliing Party: prresses the Emergency
Off key.
¾
Calle
ed Party: pre
esses the TK key within
n 1s after pre
essing the Back
key.
9.6 Qu
ueue Call
When the channels
are
e busy, the calls
will que
eue accordin
ng to their prriorities for the system's
s distribution
of channelss. When the radio makess a call with a low prioritty, it will disp
play the prom
mpt “Queue Call” on the
LCD.
9.7 Time-out Timer (TOT)
The purpose of TOT is to prevent any user from occupying a channel for an extended period. If the
preset time expires, the radio will automatically terminate the transmission and keep beeping. To stop
beeping, please release the PTT key. You must wait for a certain time period (preset by your dealer) to
initiate another transmission.
10. Functio
ons and
a Op
peratiions
10.1 Home Sccreen
The feature
e allows you
u to quickly return
to the previous menu or the home
screen
n.
key, an
nd the radio exits the sccreen and returns to the previous
In the editin
ng screen, press
the
menu imme
ediately; in other
screen
ns, press thiss key and th
he radio retu
urns to the home screen
immediately.
10.2 Managin
g the Contacts
You can ma
anage your private call contacts via
a the menu “Contact”
“
in the radio.
10.2.1 Contact
List
You can sa
ave up to 200
0 entries of private call contact
information in th
he list. To acccess the lis
st, select
“Contact ->
> Contact Lisst” or press the
t shortcutt key for Priv
vate Call Contact.
Viewing a Contact
You can vie
ew the alias and numbe
er of the conttacts.
Editing a Contact
You can ed
dit the numbe
er and alias of the conta
acts.
Deleting a Contactt
You can de
elete a conta
act from the contact list. Please note
e that the list must conta
ain one conttact at least..
10.2.2 New
Con
ntact
You can ad
dd a new con
ntact to the contact
list. The
T numberr and alias of each conta
act must be unique. The
alias can co
ontain 16 ch
haracters at most. For th
he number range,
pleasse refer to “M
Manual Dial”” in this
chapter.
Note:
¾
You can press th
he
key to sw
witch the inpu
ut method when
editing the alias.
¾
You can save th
he numbers from the Ca
all Logs, ReD
Dial List and
d BackDial L
List into the contact
list.
10.3 Manual
Dial
You can inp
put the priva
ate or group contact ID manually us
sing the keyp
pad to make
e a call .
In the home
e screen, input your dessired ID, and
d press the
, PTT
T, or
a call.
key to make
10.3.1 CPS-P
dialing rule
Number
A contact number
is co
omposed of 3 parts: NP (3 digits) + FN
F (2 digits)) + UN/GN (3 digits), tottally 8 digits..
z NP (the number prefix) range: 328–899
z FN (the fleet number) range: 20–65 (for private call), 20–99 (for group call)
z UN (the unit number, for private call) range: 200–899; GN (the group number, for group call) range:
900–999
Dialing rules
z In-fleet call: to directly dial UN/GN (3 digits) only.
z Inter-fleet call: to dial the FN (2 digits) + UN/GN (3 digits).
z Inter-prefix call: to dial the NP (3 digits) + FN (2 digits) + UN/GN (3 digits).
10.3.2 CPS-P3 dialing rule
Number
A contact number is composed of 3 parts: NP (3 digits) + FN (2 digits) + UN/GN (3 digits), totally 8 digits.
z NP (the number prefix) range: 328 – 899
z FN (the fleet number) range: 20 – 89 (for both private call and fleet group call); 90, 97, 98, 99 (for
hierarchical group call).
z UN (the unit number)/GN (the group number) range
¾
For private call: When FN ranges from 20 to 41, UN will range from 200 to 899; when FN ranges
from 42 to 89, UN will range from 200 to 549.
¾
For fleet group call, GN range is 900 – 999; for hierarchical group call, GN range is 000 – 999.
Dialing rules
z In-fleet call: to directly dial UN/GN (3 digits) only.
z Inter-fleet call: to dial the FN (2 digits) + UN/GN (3 digits).
z Inter-prefix call: to dial the NP (3 digits) + FN (2 digits) + UN/GN (3 digits).
10.3.3 1343-E dialing rule
This feature allows you to customize the dialing rules. You can request your dealer to customize the
dialing rule according to your actual needs. Please note that the user should follow the same scheme in
the same trunking system and each contact number is unique.
To learn more details regarding this dialing rule, please contact your local dealer.
10.4 Message
Sending a message
Step 1 Go to “Menu -> Message -> New Message” to enter the relevant interface .
Step 2 Type the text and press the OK key.
Step 3 Select the contact or input the contact number manually.
Step 4 Press the OK key to send the message. When the message is sent successfully, the radio will
display “Send Success!” on the LCD.
You can send the Quick Text or Status Message or forward the message saved in the InBox, OutBox or
Drafts. See the detailed introductions of the submenus of Message respectively.
New Message
You can create a new text message (23 characters at most) and save it to Drafts, or send it to a private
call contact or a group call contact.
Quick Text
Under this option there are some text messages (10 entries at most) preset by your dealer. You can
choose to edit and send any entry.
Status Message
Status Message contains the status code rather than the text, to ensure privacy of your communication. It
is preset by your dealer via the programming software. You can send but not edit the message.
InBox
The radio saves the received messages into the InBox and gives every message a corresponding icon
to show whether it is read.
: Read message
: Unread message
: Read status message
: Unread status message
The InBox can save up to 50 received messages. When it is full, the icon
will appear, and the
earliest message will be overwritten by the latest one automatically.
z For each message, you can choose to perform any of these operations: Reply, Forward (Status
Message excluded), View Details and Delete.
z To delete all messages in the InBox, select “Message -> Inbox -> Delete All”.
OutBox
The OutBox can save up to 50 sent messages. The following icons will appear to indicate whether the
message is sent successfully.
: Message is sent successfully.
: The message is not sent successfully. In this case, you can resend it.
: Status Message is sent successfully.
: Status Message is not sent successfully. In this case, you can resend it.
When the OutBox is full, no icon will appear on LCD to alert you. In addition, the earliest message will
be overwrittten by the la
atest one au
utomatically.
z For eacch message,, you can ch
hoose to perfform any of these opera
ations: Rese
end, Forward
d (Status
Messag
ge excluded)), View Deta
ails and Dele
ete.
z To delette all messa
ages in the OutBox,
sele
ect “Message -> Outboxx -> Delete A
All”.
Drafts
The Drafts can save up
p to 20 draftt messages. When the Drafts
is full,, the earliestt message will
w be
matically.
overwritten by the latesst one autom
you can choosse to perform
m any of these operation
ns: Send, Sa
ave and Dellete.
For each message,
z After the
e message in the Draftss is sent, it will
w be remov
ved from the
e Drafts and be saved to
o the
Outbox..
z To delette all messa
ages in the Drafts,
selecct “Message -> Drafts ->
> Delete All”.
10.5 Call
C Logs
The radio saves
only th
he entries off private callls, PSTN ca
alls and PAB
BX calls but n
not group ca
alls.
At most 10 call entries can be save
ed in the Ou
utgoing/Incoming/Missed
d list respecctively. When
n the
ncoming/Misssed list is fu
ull, the earlie
est entry will be overwrittten by latesst one autom
matically.
Outgoing/In
The Missed
d list include
es the misse
ed FOACSU calls and OACSU
callss.
Operation:: You can prress the Menu key to en
nter “Menu ->
- Call Logss” menu, or e
enter the “Call Logs”
menu direcctly via the programmed
Call Log ke
ey.
After accesssing a list and
a selecting
g an entry, you
y can perfo
orm any of these
operattions: hold the PTT key
to initiate a call, add the entry to Contact
List or
o delete it. To
T delete all entries in the
ncoming/Misssed list at a time, selecct “Call Logs
s -> Outgoing
g/Incoming/Missed -> Delete
All”.
Outgoing/In
10.6 MIC
M AGC
This feature
e can be enabled by your dealer via
a the progra
amming softw
ware. When
n it is enabled, the
product will control the audio gain to a proper range during transmission, providin
ng improved voice with
ume for the receiving
rad
dio.
proper volu
10.7 VOX
VOX indica
ates that the voice transmission can
n be initiated
d by speakin
ng into the m
microphone of
o radio
instead of holding
the PTT
key. When the microphone dettects that yo
our voice rea
aches the re
equired
volume to trigger
the trransmission, the transm
mission is sta
arted automa
atically.
When VOX
X is enabled,, the icon
will appe
ear on the LCD.
To enable
e or disab
ble the VOX
X feature
Press the programmed
d VOX key.
Select “Menu -> Settings -> Radio Set -> VOX” menu.
Adjust VOX Gain Level
You can adjust the sensitivity of microphone transmission via the “Menu -> Settings -> Radio Set -> VOX
-> Gain Level” menu. The bigger the gain level, the higher the gain and the lower the sensitivity. Thus,
the high volume is required to trigger the transmission.
z Internal VOX Gain Level: the sensitivity of internal microphone transmission.
z External VOX Gain Level: the sensitivity of external microphone transmission.
Caution: Please adjust the VOX Gain Level properly on your actual requirements.
10.8 LQO
This feature enables the radio to adjust the received voice volume automatically in standby mode to fit
different using environments, as well as making the heard voice clear.
Operation: You can enable or disable the LQO feature by pressing the programmed LQO key or via the
“Settings -> Radio Set -> LQO” menu.
10.9 Hunt
There are two types of hunt in different stages: the TSCC hunt during registration and the hunt for
smooth communications after registration.
10.9.1 TSCC Hunt
In trunking system, the radio is required to register with a base station prior to normal operation. Before
registering, the radio will hunt through the control channels for available base stations. During hunting,
the LCD displays “Registering, Please Wait!” and the icon
, and the LED flashes orange slowly.
There are two hunt plans: Fixed Control Channel and Flexible Control Channel. You can set the
appropriate plan via your dealer.
Fixed Control Channel
There are certain rules to define the frequency distribution of the Fixed Control Channel together. If the
trunking user frequency has such characteristic, you can configure the frequency for the radios together
via the Fixed TSCC, and adopt the Fixed Control Channel plan.
If you adopt this plan, you can select the hunt mode by going to “Hunt -> TSCC Hunt” menu or pressing
the programmed Hunt Mode key to access “Hunt” menu quickly.
See the hunt modes as follows:
z Short Hunt
In this mode, the radio will hunt for the last 10 control channels on which it registered successfully. If
the radio fails to register on all the 10 channels, it will orderly hunt the channels in the Fixed TSCC
List preset by the dealer. The hunt process would recycle until the radio registers with a base station
successfully.
Start
Hunt for the last 10
registered channels
Register successfully
Yes
No
Hunt for fixed control
channel
No
Register successfully
Yes
Update the latest 10
registered channels
End
z Comprehensive Hunt
If Short Hunt brings no successful registration, Comprehensive Hunt will go from the channel defined
at Lowest of Comprehensive Hunt. During the hunt, after every 100 channels are hunted, the
previously mentioned 10 channels would be hunted again. If no successful registration is achieved
after comprehensive hunt, the hunt will go on with the Fixed TSCC List. The hunt process would
recycle until the radio registers with a base station successfully.
z Team Hunt
The radio will hunt for the last 10 control channels on which it has worked. If the radio fails to register
on all the 10 channels, the team hunt will start with the Fixed TSCC List preset by the dealer. The
hunt process would recycle until the radio registers with a base station successfully.
Flexible Control Channel
There are certain rules to configure the frequency distribution of the Fixed Control Channel together.
However, in practice, some trunking users do not have unified or orderly frequency plans, so Fixed
Control Channel is unable to unify the frequency configuration. You can use Flexible TSCC for the
frequency configuration and adopt the Flexible Control Channel plan.
The hunt process of Flexible Control Channel is similar to Short Hunt (see “Short Hunt”), and it only
differs in that the hunted object is Flexible Control Channel rather than Fixed Control Channel.
10.9.2 Hunt for Smooth Communications
The system provides multiple hunt policies for the registered radios to ensure normal communications.
You can select your desired hunt method by accessing the “Hunt” menu from the “Menu”or via the
programmed Hunt Mode key quickly.
You can also enable or disable your desired hunt quickly via the programmable key assigned with the
corresponding hunt feature, such as the Background Hunt feature.
Background Hunt
The idle radio will check the signal strength of the base station with which it registers. If the signal
strength of the base station is below the value defined at Threshold Level, the radio will automatically
hunt for another one with better signal and registers with it. Thus, the radio can always work with a base
station with strong signal.
HomeStation Hunt
The feature offers the radio the priority to register with a frequently used base station. This can balance
the base station load well, especially in the area covered by multiple base stations, increasing system
response speed and improving communication quality.
Each base station has a limited load. When the number of the radios registered with a base station
reaches the upper limit, the system response will be delayed, resulting in intermittent communications.
However, a radio works in a fixed area most of the time. Even though it works on the channel of another
base station in the area covered by multiple base stations, it will jump to work on its home channel once
the signal strength of the channel matches the defined value. The communications will not be affected at
all during base station switch.
Handover
The change in radio position may cause the signal strength received from base station to fluctuate, and
the communication quality is affected accordingly. In case of weak signal strength, this feature enables
the radio to work with another base station having better signals automatically, assuring quality
communications.
10.10 Encrypt
Encrypt indicates the voices transmitted are encrypted between radios. For example, Radio A transmits
the encrypted voice to Radio B, and Radio B should enable Encrypt feature to receive the voice.
Operation: You can enable/disable the Encrypt feature via the programmed Encrypt key or by entering
the menu “Menu -> Settings -> Radio Set -> Encrypt”.
10.11 Authentication
Authentication is used to ensure the validity of the user accounts in the network. It operates in a way that
the radio and the base station authenticate the validity of each other. Currently, the authentication is only
needed during registration. Only when both the radio and the base station pass the authentication can
the registration be made.
Operation: You can enable/disable the feature via the “Menu -> Settings -> Radio Set -> Authentication”
menu.
10.12 Covert Mode
When this feature is enabled, the radio will close any visible indications on it, such as the LED, Vibration,
etc, which are set by your dealer. This feature is mainly used in special missions.
Operation: To enable or disable the Covert mode, you can press the programmed Covert Mode key, or
enter the menu “Menu -> Settings -> Radio Set -> Covert Mode”.
10.13 Man Down (optional)
Your radio will sound a pre-alert tone if it is positioned aslant for a preset time period, and will enter the
Emergency mode if you do not place it vertically within such time period. To exit the Emergency mode,
please place it upright.
You can enable or disable the Man Down feature by pressing the programmed Man Down key or via the
menu “Menu -> Settings -> Radio Set -> Man Down”.
The radio gives a high-pitched tone when the Man Down feature is enabled and a low-pitched tone when
the feature is disabled.
10.14 Rent
You can rent the radio from your dealer. . When the rental period expires, you are not allowed to use this
radio.
You can check the remaining rental time via the menu “Menu -> Settings -> Radio Set -> Rent -> Rent
Query”.
If the Rent Pre-Alert feature is enabled, the radio will give a tone periodically to remind you of the
remaining time on your rental.
10.15 Priority
This feature indicates the priority of the normal voice services. When there is no free service channel in
the system, the system will respond to the higher-priority voice service first.
The normal voice services include all calls, such as private call, general group call, broadcast group call,
PSTN call, PABX call, etc, except emergent call.
You can set the priority of your normal voice services via the menu “Menu -> Settings -> Radio Set ->
Priority”.
z The priority follows this principle: Low < Medium < High. When the channels are occupied, the calls
will queue according to their priorities for the system's distribution of channels. When the queue is full,
the higher-priority calls can jump the queue, and, accordingly, the lower-priority calls will be extruded
out (the system will prompt that it is busy). In addition, the emergency calls or preemption calls can
forcibly disconnect the on-going lower-priority calls to release the channels for themselves.
z Preemption: This is the highest priority. When the system is busy, such calls do not need to queue.
They can disconnect other on-going calls with lower priority to release the channels for themselves.
Note: The “Preemption” option will not be available in your radio unless your dealer enables it.
10.16 Radio Set
You can optimize your radio performance via the following configuration according to actual needs and
your preferences.
Enter “Menu -> Settings -> Radio Set” menu to set the items as introduced below:
Power Level
This menu is to set the Tx power level to High or Low. High power can extend the coverage, enabling
you to communicate with farther radios.
Alternatively, you can toggle the power level by pressing the programmed Adjust Power Level key in
the home screen.
On the LCD, High power is indicated by
and Low power is indicated by
Language
This option allows you to set the language in which all interface information is displayed. Currently, this
radio only supports English and Simplified Chinese.
Backlight
This menu allows you to set the backlight. Activating the backlight can illuminate the LCD and the
keypad, so as to facilitate your operation under dim light conditions. The menu has the following options:
z Off: The backlight will always remain off.
z On: The backlight is on all the time.
z Timed: If no operation or signal transmission/receipt occurs within the time preset by the dealer, the
backlight will be turned off automatically.
Brightness
This option allows you to set the display brightness. You can raise or lower it using the Up/Down key.
Keypad Lock
This option allows you to set whether to enable this function. When "Enable" is selected, you can use the
Up/Down key to set the time range after which the keypad will be locked. Available range: 5 – 60
seconds.
LED Indicator
This option allows you to set whether to enable LED indicator. Generally, the LED indicator can indicate
Tx/Rx, Hunt status, Incoming Call, etc. The indications of the LED are set by the dealer.
Tone
You can select the tones on actual requirements.
Tone
Radio Silent
Talk Permit
Description
This feature disables all the tones.
The tone given upon successful signal transmission to prompt the user to
talk.
Private Call
The tone given when the radio receives a private call successfully.
TxtMsg
The tone given when the radio receives a message.
Keypad
The tone given when you are operating the keypad.
Low Battery
The tone given when the radio is in low battery status. Then you will need
to replace the battery.
Call End Tone
The tone given upon a call ending.
Group Call Tone
The tone given upon the receipt of a group call.
Incoming Call Tone
The tone given upon the receipt of a FOACSU call.
PTT Enable
The tone given when the PTT is enabled to transmit the voice.
Hunt Tone
The tone given when the radio starts the control channel hunt.
Group Notify
Call Queued
The group number played when you are selecting the group call contacts
by the Group Call Selector knob.
The tone given when the radio is in the call queue, with the prompt “Queue
Call” displayed on the LCD.
10.17 Mode
This feature allows you to select the work mode for the radio. Be prudent about this operation, as the
change of mode will cause your radio to reboot.
Operation: Press the programmed Operation Mode Switch key to switch the mode directly.
You can also press the programmed Operation Mode key to enter “Mode” menu or go to “Menu ->
Mode” for switching.
10.18 GPS
When GPS feature is enabled, you can check the position information of the radio and choose the time
zone for it. Go to “Menu -> Accessories -> GPS”.
10.19 Device Info
With this option, you can view basic information of your radio, including radio ID, serial number, model
name, frequency range, firmware version, radio data version, boot loader version, etc.
Go to “Menu -> Settings -> Device Info”.
10.20 Battery Power Indicator
This feature allows you to know the current battery power.
Hold down the programmed Battery Power Indicator key, and the radio will give a specific indication to
represent the current battery power. Release this key to exit.
Indication
Battery Power Icon
Battery Power
The LED glows green.
High
The LED glows orange.
Medium
The LED glows red.
Low
The LED glows red and
the
low
sounds.
battery
tone
Insufficient
11. Troubleshooting
Phenomena
Analysis
The
battery
may
Solution
be
improperly installed.
The battery may run out.
Power-on failure
Recharge or replace the battery.
The battery may suffer from
poor
contact
caused
by
dirtied or damaged battery
contacts.
The radio cannot
The
radio
cannot
establish a call.
base station.
The signal is discontinuous.
The signal is poor.
call
is
Your ID may be repeated.
called
management system.
Make sure you are within the coverage of the
base station.
Make sure you are within the coverage of the
base station.
whether your ID is repeated in the network
party
disconnects
repeatedly
whether your radio is authorized in the network
management system.
established.
The
Contact the base station manager to check
Contact the base station manager to check
No voice is heard
after
service center for inspection and repair.
signals from the base station.
authorized.
repeatedly.
not be solved, contact your dealer or authorized
Make sure you are within the coverage of the
The radio maybe not be
The radio registers
Clean the battery contacts. If the problem can
The radio may not detect
register
successfully.
Remove the battery and attach it again.
during
The signal is discontinuous.
Make sure you are within the coverage of the
base station.
communication.
Low battery
During
receiving,
the voice is weak,
discontinuous
totally inactive.
or
The volume may be set to a
low level.
Recharge or replace the battery.
Increase the volume by rotating the Volume
Control knob clockwise, or ask your dealer to
disable the Digital Mic AGC feature.
The antenna may get loose
Power off the radio, re-install the antenna and
or improperly installed.
power on the radio again.
Phenomena
Analysis
Solution
Clean surface of the speaker. If the problem can
The speaker may be blocked
not be solved, contact your dealer or our
or damaged.
authorized service center for inspection and
repair.
You
can
not
communicate with
Make sure you are within the communication
The signal is poor.
range.
other members.
The
voice
is
unclear.
Make sure you are within the communication
The signal is poor.
range.
Make sure you are within the communication
The signal is poor.
You
may
unfavorable
range.
be
at
an
position.
For
example,
The noise is too
loud.
communication
your
may
be
blocked by high buildings or
Move to an open and flat area, and restart the
radio.
frustrated in the underground
areas.
You may suffer from external
disturbance
(such
as
electromagnetic
Stay away from equipment that may cause
interference.
interference).
You can not use
The keypad may fail to
the keys.
function temporarily.
The LCD does not
display
information.
any
The LCD may fail to function
temporarily.
Restart the radio.
Restart the radio.
If the above solutions can not fix the problems for you, or you may have some other queries, please
contact us or your local dealer for more technical support.
12. Care and Cleaning
To guarantee optimal performance as well as a long service life of the product, please follow the tips
below.
Product Care
z Do not pierce or scrape the product.
z Keep the product far away from substances that can corrode the circuit.
z Do not hold the product by its antenna or earpiece cable directly.
z Attach the accessory jack cover when the product is not in use.
Product Cleaning
Caution: Power off and remove the battery before cleaning. Clean up the dust and fine particles
on the product surface and charging piece with a clean and dry lint-free cloth or a brush regularly.
z Use neutral cleanser and a non-woven fabric to clean the keys, control knobs and front case after
long-time use. Do not use chemical preparations such as stain removers, alcohol, sprays or oil
preparations, so as to avoid surface case damage.
z Make sure the product is completely dry before use.
13. Appendix
13.1 Input Method
You can enter aliases, numbers or messages using the keypad. The radio supports these input methods:
Chinese Pinyin (simplified), English and Number.
Chinese Pinyin (Simplified)
Step 1 Press
to switch to Chinese Pinyin mode.
Step 2 Enter the pinyin through alphanumeric keys; then a list of possible combinations and
corresponding characters will appear.
Step 3 Use the Up/Down key to choose the right pinyin.
Step 4 Press the OK key to highlight the characters, and choose the right character using the
Up/Down key.
Step 5 Press the OK key to enter the selected character.
You can repeat the above steps to continue.
English
Step 1 Press
to switch to uppercase English or lowercase English mode.
Step 2 Press the key which bear your desired letter repeatedly until the letter appears.
You can repeat the above steps to continue.
Number
Step 1 Press
to switch to Number mode.
Step 2 Enter the numbers through alphanumeric keys
to
Special Character
To enter common punctuations and special characters, press
To input a space, press
Note: You can use the Up/Down key to move the cursor leftward/rightward in the entered text.
FCC Statement
Operation is subject to the following two conditions: 1. This device may not cause harmful
interference, and 2. This device must accept any interference received, including
interference that may cause undesired operation.
Note:” Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.”
Compliance with RF Exposure Standards
Hytera’s Is Digital Radio complies with the following RF energy exposure standards
and guidelines:
• United States Federal Communications Commission, Code of Federal Regulations; 47
CFR § 1.1307, 1.1310 and 2.1093
• American National Standards Institute (ANSI) / Institute of Electrical and Electronic
Engineers (IEEE) C95. 1:2005; Canada RSS102 Issue 5 March 2015.
• Institute of Electrical and Electronic Engineers (IEEE) C95.1:2005 Edition
RF Exposure Compliance and Control Guidelines and
Operating Instructions
To control your exposure and ensure compliance with the occupational/controlled
environment exposure limits always adhere to the following procedures.
Guidelines:
• Do not remove the RF Exposure Label from the device.
• User awareness instructions should accompany device when transferred to other users.
• Do not use this device if the operational requirements described herein are not met.
Operating Instructions:
• Transmit no more than the rated duty factor of 50% of the time. To transmit (talk), push
the Push-To-Talk (PTT) button. To receive calls, release the PTT button. Transmitting
50 % of the time, or less, is important because this radio generates measurable RF
energy exposure only when transmitting (in terms of measuring for standards
compliance).
• Hold the radio in a vertical position in front of face with the microphone (and the other
parts of the radio, including the antenna) at least one inch (2.5 cm) away from the nose.
Keeping the radio at the proper distance is important because RF exposures decrease
with distance from the antenna. Antenna should be kept away from eyes.
• When worn on the body, always place the radio in a Hytera’s approved clip, holder,
holster, case, or body harness for this product. Using approved body-worn accessories is
important because the use of Hytera’s or other manufacturer’s non-approved accessories
may result in exposure levels, which exceed the FCC’s occupational/controlled
environment RF exposure limits.
• Use only manufacturer’s name approved supplied or replacement antennas, batteries,
and accessories. Use of non-manufacturer-name approved antennas, batteries, and
accessories may exceed the FCC RF exposure guidelines.
IC statement
The device has been tested and compliance with SAR limits, users can obtain Canadian
information on RF exposure and compliance
Après examen de ce matériel aux conformité aux limites DAS et/ou aux limites d’intensité
de champ RF, les utilisateurs peuvent sur l’exposition aux radiofréquences et la
conformité and compliance d’acquérir les informations correspondantes
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the
following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation
of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux
appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions
suivantes : (1) l'appareil ne
doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout
brouillage radioélectrique subi, même si le brouillage est susceptible d'en
compromettre le fonctionnement

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2016:07:25 15:57:50+08:00
Create Date                     : 2015:09:21 17:54:07+08:00
Metadata Date                   : 2016:07:25 15:57:50+08:00
Format                          : application/pdf
Title                           : Microsoft Word - [Hytera-I&M-79XIS-001]PD79XIS Instruction Manuals_V1.0
Creator                         : l00999
Document ID                     : uuid:3170c380-44ba-4733-98cf-52b2624f972c
Instance ID                     : uuid:af58abc2-a70d-4907-b3db-a1a1a9f903d1
Has XFA                         : No
Page Count                      : 54
Author                          : l00999
EXIF Metadata provided by EXIF.tools
FCC ID Filing: YAMPD79XISU1

Navigation menu