Hyundai IBT L17C0D080 17 inch LCD Monitor User Manual
Hyundai IBT Corp. 17 inch LCD Monitor Users Manual
Users Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 175248 |
| Application ID | hyeM1/eqOgYeqIkVJeOc5A== |
| Document Description | Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 61.68kB (770960 bits) |
| Date Submitted | 2001-10-22 00:00:00 |
| Date Available | 2001-10-22 00:00:00 |
| Creation Date | 2001-08-24 10:55:24 |
| Producing Software | Acrobat Distiller 4.0 for Macintosh |
| Document Lastmod | 2001-08-24 10:55:56 |
| Document Title | Users Manual |
NEXT ImageQuest L70A TFT LCD Color Monitor User's Guide Click www.imageQuest.co.kr BACK U.S.A. U.S.FEDERAL COMMUNICATIONS COMMISSION RADIO FREQUENCY INTERFERENCE STATEMENT INFORMATION TO THE USER NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet of a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for assistance. Changes or modification not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Connecting of peripherals requires the use of grounded shielded signal cables. NEXT BACK DECLARATION OF CONFORMITY WE ImageQuest CO., LTD. Ami-ri Bubal-Eub Ichon-Si Kyungki-Do 467-860 KOREA declare under our sole responsibility that the product: Kind of equipment COLOR MONITOR Type-Designation L17C0D080 to which this declaration relates is in conformity with the following standard(s) or other normative document(s) Safety : EN 60950 : 1992 + A1, A2, A3, A4, A11 EMC : EN 55022 : 1998, EN 55024 : 1998 EN 61000-3-2 : 1995+A1 : 1998+A2 : 1998 EN 61000-3-3 : 1995 following the provisions of the Low Voltage Directive 73/23/EEC, 93/68/EEC and the EMC Directive 89/336/EEC. Accredited testlaboratory: TÜV Rheinland Am Grauen Stein 51105 Köln KOREA / 2001 (Place and date of issue) HONG KI, KIM (Name and signature of authorized person) NEXT BACK L70A 17" TFT LCD Color Monitor NEXT Contents 1. Introduction ...................................1/22 2. Safety Information ........................1/22 3. Installing the monitor ...................4/22 3-1. Packing List .........................................4/22 3-2. Selecting a suitable location ..............5/22 3-3. Connecting the monitor .....................5/22 USB Hub ..............................................9/22 3-4. Setting the refresh rate ......................8/22 Preset Timing Table ............................9/22 3-5. VESA MOUNTING ..............................10/22 4. Adjusting the picture ..................12/22 4-1. Using the On Screen Display ...........14/22 4-2. Direct access buttons .......................14/22 4-3. OSD Adjustments .............................15/22 5. Display power management ......18/22 Reducing power consumption ..............18/22 6. Troubleshooting ..........................19/22 7. Specifications ..............................22/22 BACK L70A 17" TFT LCD Color Monitor NEXT 1. Introduction This manual contains instructions for installing and operating ImageQuest L70A. ImageQuest L70A is a highly ergonomic color display unit. • • • • • • • • • • • • 2. Safety Information 17" viewable SXGA LCD High quality screen re-scaling capability Real ColorTM fleshtone adjustment and digital color control with innovative color management. 100-240V AC input voltage / 12V (3.75A) Power adapter. VESA DPMS (Display Power Management Signalling) VESA DDC1/2B compatibility Advanced digital On-Screen-Display controls Digital signal input by DVI-1.0 compatibility Fast and accurate auto adjustment Most advanced image scaling Supporting VESA Flat Panel Monitor Physical Mounting Interface USB (Universal Serial Bus) hub, Bus-Power mode hub This Monitor has been engineered and manufactured to assure your safety. You can prevent serious electrical shock and other hazards by keeping in mind the following: Do not place anything wet on the monitor or the power cord. Never cover the ventilation openings with any material and never touch them with metallic or inflammable materials. 1/22 BACK L70A 17" TFT LCD Color Monitor NEXT Avoid operating the monitor in extreme heat, humidity or areas affected by dust. Temperature : 5~35°C Humidity : 30~80RH Be sure to turn the monitor off before plugging the power cord into the socket. Make sure that the power cord and the other cords are securely and rightly connected. Overloaded AC outlets and extension cords are dangerous, as are frayed power cords and broken plugs, which may cause electric shock or fire. Call your service technician for replacement. Do not use sharp tools such as a pin or a pencil near the monitor, as they may scratch the LCD surface. Do not use a solvent, such as benzene, to clean the monitor, as it will damage the LCD surface. 2/22 L70A 17" TFT LCD Color Monitor BACK NEXT Cleaning and Maintenance • • • • • To avoid risk of electric shock, do not disassemble the display unit cabinet. The unit is not user-serviceable. Remember to unplug the display unit from the power outlet before cleaning. Do not use alcohol (methyl, ethyl or isopropyl) or any strong dissolvent. Do not use thinner or benzene, abrasive cleaners or compressed air. Do not wipe the screen with a cloth or sponge that could scratch the surface. To clean your antistatic screen, use water and a special microfiber screen cleaning tissue used in optical lens cleaning, or lightly dampen a soft, clean cloth with water or a mild detergent. If the instructions above do not help in removing stains, contact an authorized service agent. 3/22 BACK L70A 17" TFT LCD Color Monitor 3. Installing the monitor NEXT The following items should be found in the packaging. 3-1. Packing List Power Cord Signal Cable UK Japan American/Canada Europe South Africa Australia DVI-D Cable (Option) USB Cable Korea AC/DC Power adapter Compact Disc Above power cord can be changed upon different voltage areas. Please contact your dealer if anything is missing or damaged. Other power cord except the cord packed in the product or longer than 3m may affect EMC of the product in operating condition. 4/22 L70A 17" TFT LCD Color Monitor 3-2. Selecting a suitable location • • • • • 3-3. Connecting the monitor 1. 2. 3. 4. 5. BACK NEXT Place the monitor at least 30cm from other electrical or heat-emitting equipment and allow at least 10cm on each side for ventilation. Place the monitor in a position where no light shines directly onto or is reflected on the screen. To reduce eye strain, avoid installing the display unit against a bright background such as a window. Position the monitor so that the top of the screen is no higher than eye level. Position the monitor directly in front of you at a comfortable reading distance (around 45 to 90cm) Before you start cabling your monitor, check that the power is off on all units. To avoid any possibility of electric shock, always connect your equipment to properly earthed outlets. Insert the other 15-pin /DVI-D signal cable connector into the 15-pin VGA/DVI-D connection on your computer and screw it down. Plug the power cord connection to connection on the AC-DC Power adapter. Plug the jack of the AC-DC Power adapter connection to connection on monitor. Plug the other end of the power cord to your computer's main supply or to a 100V-240V earthed electrical outlet. Turn on the monitor using the power switch and check that the power LED is on. If not, repeat steps 1,2,3 and 4 or refer to the Troubleshooting section of this guide. 5/22 BACK L70A 17" TFT LCD Color Monitor 6. NEXT Turn on the power to the computer. The picture will appear within about 10 seconds. Adjust the picture to obtain optimum picture quality. See section Adjusting the picture in this guide for more information. 15 pin D-sub cable (Analog RGB) DVI-D cable (Digital TMDS) 6/22 BACK L70A 17" TFT LCD Color Monitor NEXT USB hub The USB hub(Bus-powerd mode hub) have 1 upstream port and 2 downstream ports. The upstream port can be connected to the root hub of host PC or other downstream port. Two(2) downstream ports allow to connect another USB device such as USB mouse, joystick, printer etc. 1) The maximum supply current of downstream port is 100mA each when buspowered mode hub. 2) To activate the USB hub, your host system should have USB capability. USB 2 downstream ports 7/22 BACK L70A 17" TFT LCD Color Monitor LED Indicator 3-4. Setting the refresh rate NEXT Soft Power Switch Follow the instructions below to set your refresh rate in Windows 98. 1. 2. 3. 4. 5. 6. Go to the configuration window(Start-Settings-Configuration window). Double click on the ‘Display’ icon. Click on the ‘Settings’ tab. Click on the ‘Advanced’ button. Click on ‘Adapter’ and select 60Hz from the list. Click on ‘Apply’ to accept the selected value. 8/22 BACK L70A 17" TFT LCD Color Monitor NEXT Preset Timing Table If the signal from the system doesn't equal to the preset timing mode, adjust the mode with reference to the user guide of videocard because the screen may not be displayed. ANALOG R.G.B INPUT The recommended setting is a resolution of 1280x1024 and a refresh rate of 60Hz. No. Resolution Horizontal Frequency Refresh rate 10 11 12 13 14 720 x 400 720 x 480 640 x 480 800 x 600 800 x 600 800 x 600 800 x 600 832 x 624 1024 x 768 1024 x 768 1024 x 768 1152 x 870 1280 x 1024 1280 x 1024 31.5 KHz 31.5 KHz 37.5 KHz 35.2 KHz 37.9 KHz 48.1 KHz 46.9 KHz 49.7 KHz 48.4 KHz 56.5 KHz 60.0 KHz 68.7 KHz 63.9 KHz 80.0 KHz 70 Hz 70 Hz 75 Hz 56 Hz 60 Hz 72 Hz 75 Hz 75 Hz 60 Hz 70 Hz 75 Hz 75 Hz 60 Hz 75 Hz 9/21 BACK L70A 17" TFT LCD Color Monitor NEXT DIGITAL R.G.B INPUT No. Resolution Horizontal Frequency 640 x 480 31.5 KHz 60 Hz 800 x 600 37.9 KHz 60 Hz 1024 x 768 48.4 KHz 60 Hz 1280 x 1024 63.9 KHz 60 Hz Refresh rate 3-5. VESA MOUNTING • • This display unit supports VESA FPMPMI standard for 100mmx100mm screw mounting by giving 4 screw holes inside the base stand of the unit. The base stand shall be removed before connecting to Specialty Flat Panel Monitor Mounting Device. For buying VESA Flat Panel Monitor Mounting Devices, please contact following information. * Ergotron, Inc. · Address : Ergotron Europe Kuiperbergweg 50 1101 AG Amsterdam The Netherlands · Tel : +31 20 696 60 65 · Fax : +31 20 609 04 59 · E-mail : info.eu@ergotron.com 10/22 BACK L70A 17" TFT LCD Color Monitor NEXT Desk Mount Wall Mount 11/22 BACK L70A 17" TFT LCD Color Monitor NEXT 4. Adjusting the picture You can adjust the screen display by using the buttons located below the screen. In case of applying Analog RGB Input 1280X1024 V:60.0/H:63.9 BRIGHTNESS 12/22 BACK L70A 17" TFT LCD Color Monitor NEXT In case of applying Digital TMDS Input 1280X1024 V:60.0/H:63.9 BRIGHTNESS 13/22 L70A 17" TFT LCD Color Monitor 4-1. Using the On Screen Display 1. 2. 3. 4. 5. 6. BACK NEXT Push the MENU button to call the OSD to the screen. The resolution and frequency are displayed at the top of the menu box for your information. Push the or button to choose the item you want to adjust. The selected item is highlighted. Push the SELECT button to adjust the highlighted item. Use the or button to adjust the selection. Push the MENU button to return to the previous menu if you are in a submenu. The display unit automatically saves the new settings in 1 second after your last adjustments and the menu disappears. You can also push the MENU button to make the menu disappear. 4-2. Direct access buttons AUTO ADJUST At first display a full screen such as Window's back ground. Push the button SELECT(AUTO) to adjust the shape of screen automatically. INPUT SELECT Push the button to choose the input select adjustment after choosing one of Analog Signal or Digital Signal. LED Indicator will be displyed with Amber on processing. 14/22 BACK L70A 17" TFT LCD Color Monitor NEXT 4-3. OSD Adjustments The OSD adjustments available to you are listed below. You can play the movie file to see how to adjust the picture image by clicking each icon or title hereunder. BRIGHTNESS Adjust the brightness of the screen. CONTRAST Adjust the contrast of the screen. COLOR CONTROL Color temperature affects the tint of the image. With lower color temperatures the image turns reddish and with higher temperatures bluish. There are three color settings available: Mode 1(a cool white), Mode 2(a warm white) or USER. With the USER setting you can set individual values for red, green and blue. YUV COLOR In particular, color technology allows users to make the following color adjustment. HUE Adjust the hue of the video image. FLESH TONE Adjust the flesh Tone of the video image. 15/22 BACK L70A 17" TFT LCD Color Monitor NEXT MISCELLANEOUS RECALL Recall the saved color data. OSD TIMER You can set the displayed time of OSD Menu window on the screen by using this adjustment. OSD POSITION Adjust the OSD menu's horizontal or vertical position on the screen. AUTO ADJUST You can adjust the shape of screen automatically at the full screen pattern. LANGUAGE You can select the language in which adjustment menus are displayed. The following languages are available: English, French, German, Italian and Spanish. H/V POSITION H-POSITION Adjusts the horizontal position of the entire screen image. V-POSITION Adjusts the vertical position of the entire screen image. 16/22 BACK L70A 17" TFT LCD Color Monitor NEXT CLOCK PHASE PHASE Adjust the noise of the screen image. CLOCK Adjust the horizontal size of the entire screen image. INPUT SELECT This menu used to choose the desired input signal source. There are two available signal source. • Analog R.G.B : 15 pin D-sub, Analog Signal • Digital TMDS : 24 pin DVI-D, Digital Signal In case of applying Digital TMDS Input, the functions of Color Control, Auto Adjust, H/V Position, Clock Phase are not supported. 17/22 BACK L70A 17" TFT LCD Color Monitor 5. Display power management Reducing power consumption NEXT If the power management function of your computer is enabled, your monitor turns on and off automatically. You can control power management features from your computer. Your computer may have power management features which enable the computer or monitor to enter a power saving mode when the system is idle. You can reactivate the system by pressing any key or moving the mouse. Mode LED Normal Green 45 W off Orange 5W Unplugged Not illuminated 0W Power consumption The power button does not disconnect the monitor from the mains. The only way to isolate the monitor completely from the mains supply is to unplug the mains cable. 18/22 BACK L70A 17" TFT LCD Color Monitor NEXT 6. Troubleshooting If your monitor is not functioning properly, you may be able to solve the problem by reading followings. Problem Blank screen Possible solution If the power LED is not lit, push the Soft power switch or check the AC cord to turn the monitor on. If the display unit is powered through the computer, check that the computer is switched on. The display unit might be in standby mode. Push one of the keyboard keys. Check that the keyboard is properly connected to the computer. Check that the signal cable connector is properly connected and that the connection pins are not bent or damaged. If the connector is loose, tighten the connector's screws. Check that the power cable is correctly connected to the display unit and to the power outlet. Error message: Video mode not supported Check the resolution and the frequency on the video port of your computer. Compare these values with the data in the Preset Timing Table. The display does not enter power management mode The video signal from the computer does not comply with VESA DPMS standard. Either the computer or the graphics adapter is not using the VESA DPMS power management function. 19/22 BACK L70A 17" TFT LCD Color Monitor Problem NEXT Possible solution Color defects Check that the signal cable connector is properly connected and that the connection pins are not bent or damaged. Try another color temperature. Size, position, shape or quality unsatisfactory Adjust the picture characteristics as described in the section OSD Adjustment(4-3). Duplicated images A problem with your graphics adapter or display unit. Contact your service representative. Image is not stable Check that the display resolution and frequency from your PC or graphic adapter is an available mode for your monitor. In your PC, you can check through Control panel, Display, Settings. If the setting is not correct, use your computer utility program to change the display settings. Message : No signal Check that the signal cabel connector is properly connected and that the connection pins are not bent or damaged. If the connector is loose, tighten the connector’s screws. Check that the computer is switched on. The power LED is a orange color To enter a power saving mode. You can reactivate the system by pressing any key or moving the mouse. 20/22 BACK L70A 17" TFT LCD Color Monitor Problem The power LED is a orange color NEXT Possible solution LED Indicator can be orange color on changing of video mode or Input Signal(D-sub/DVI). Check the Resolution and the frequency on the video part of your computer. Compare these values with the data in the Preset Timing Table. Contacting service If the above troubleshooting hints do not help you find a solution to the problem, contact an authorized service agent. If the monitor is sent for service, use the original package if possible. Unplug the display unit from the power outlet and contact a service agent when: • • • • The monitor does not operate normally according to the operating instructions. The monitor exhibits a distinct change in performance. The monitor has been dropped or the cabinet has been damaged. The monitor has been exposed to rain, or water or liquid has been spilled onto the monitor. 21/22 BACK L70A 17" TFT LCD Color Monitor 7. Specifications LCD Brightness Response Time Display area Number of color Input signals Frequency rate Maximum bandwidth Maximum resolution Recommanded resolution Input voltage Power consumption Power management Plug & Play OSD menu USB VESA FPMPMI Ergonomics, Safety and EMC Operating Temperature Weight Dimensions (W X H X D mm) 17"viewable, Diagonal, Pixel pitch 0.26 mm, AM-TFT 25msec, 250cd/m2 25msec 337.92 X 270.336 mm 16,2 million colors R.G.B Analog, Digital TMDS(DVI-D), Horizontal : 31.0 to 80.0KHz, Vertical : 56 to 75Hz 135 MHz Analog RGB : 1280X1024@75Hz Digital TMDS : 1280X1024@60Hz 1280X1024@60Hz DC 12V 3.75A 45W VESA DPMS VESA DDC 1/2B BRIGHTNESS, CONTRAST, COLOR CONTROL, YUV COLOR, MISCELLANEOUS, AUTO ADJUST, LANGUAGE, H./V. POSITION, CLOCK-PHASE, INPUT SELECT 1up X 2down (Bus-Powered Hub) 100 mm X 100 mm screw mounting TCO, FCC Class B, CE, cULus, TÜV-GS, SEMKO 5 ~ 35O C 6.7Kg unpacked, 8.7Kg packed 420 X 437 X 220 mm • Specification is subject to change without notice for performance improvement. 22/22
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No Create Date : 2001:08:24 10:55:24 Producer : Acrobat Distiller 4.0 for Macintosh Modify Date : 2001:08:24 10:55:56+09:00 Page Count : 26EXIF Metadata provided by EXIF.tools