Hyundai IBT LT26AW000 26 Inches LCD/TV Monitor User Manual 1

Hyundai IBT Corp. 26 Inches LCD/TV Monitor 1

Contents

User Manual 1

FCC ID : PJILT26AW000   REPORT NO. : HCT-F04-0303              HYUNDAI C–TECH                       ATTACHMENT E -1.  - USER’S MANUAL -
HQL260WRLCD TVOperating instructions
U.S.A.  U.S.FEDERAL COMMUNICATIONS COMMISSION   RADIO FREQUENCY INTERFERENCE STATEMENT INFORMATION TO THE USER  NOTE : This equipment has been tested and found to comply with the limits for a          Class B digital device pursuant to Part 15 of the FCC Rules.  These limits are designed to provide reasonable protection against harmful Interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if Not installed and used in accordance with the instructions, may cause harmful  Interference to radio communications. However, there is no guarantee that interference will not occur in a particular   Installation. If this equipment does cause harmful interference to radio or television reception, Which can be determined by turning the equipment off and on, the user is  encouraged to try to correct the interference by one or more of the following  measures:    Reorient or relocate the receiving antenna.   Increase the separation between the equipment and receiver.   Connect the equipment into an outlet of a circuit different from that  to which the receiver is connected.   Consult the dealer or an experienced radio/TV technician for assistance.  Changes or modification not expressly approved by the party responsible for   Compliance could void the user’s authority to operate the equipment. Connecting of peripherals requires the use of grounded shielded signal cables.
LCD TVA Wide Array of Screen Settings  You can choose different screen settings depending on the type of program you arewatching or the surrounding conditions (the lighting or the outside weather conditions).You can switch among the Sports, Movies, Music and Normal options , or you canconfigure the screen settings yourself.A Wide Array of Sound SettingsYou can choose an optimal sound setting for the type of program you are watching.You can switch among the Music, Movie, News and Normal options , or you can configurethe settings yourself.Favorite Channel MemoryYou can store your favorite channels in the order of preference for easy channel selection.CaptionsWhen you watch a captioned program, you can turn the caption option on to see Englishtext on te screen. This feature also works with video CDs or videotapes with captions.CAUTIONRISK OF ELECTRIC SHOCK DO NOT OPENCAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.WARNINGTo reduce the risk of fire or shock hazard, do not expose the TV to rain or moisture.This symbol is intended to alert the user to the presence of uninsulated“dangerous voltage” within the product’s enclosure that may be of sufficientmagnitude to constitute a risk of electric shock to persons.This symbol is intended to alert the user to the presence of important operatingand maintenance (servicing) instructions in the literature accompanying theappliance.
The unit should not be placed in a built-in installation such asa book-case, limited space rack unless proper ventilation isprovided.- This may cause fire by overheating or damage the unit byfalling.3Safety InstructionsDo not use the unit in direct sunlight and keep it away fromheaters, stoves, and other sources of heat. - This may cause a fire.Do not use the unit near water, oil or inflammables.- This may cause a fire.During storm conditions (especially when there is lighting)unplug your TV set from the main electrical outlet and antenna.Do not use a damaged plug and do not let the power cordtouch a heat source.- This may cause an electric shock or fire.Do not connect too many extension cords or plugs to an outlet.- This may cause a fire.Place the unit on a flat and stable surface.- The unit can cause injury or damage the unit by falling.Do not attempt to service the unit. Contact an authorized dealer or repair service.- Servicing the unit yourself may cause an electric shock or fire. Keep the power adapter away from any heat source. - This may cause a fire.If there are any unusual sounds or smells coming from theunit, unplug it immediately and contact an authorized dealer or repair service.- This may be caused by an electric shock or fire.
4Safety InstructionsDo not use or store inflammable substances near the unit- This may cause an explosion or fire.Place the unit away from the wall for well ventilation.- This may cause a fire.Place the antenna away from the electric wire, not to toucheven though it falls down by wind.- This may cause an electric shock.Do not touch the plug with wet hands.- This may cause an electric shock.Be sure to plug in tightly and hold the plug, not the cord whendisconnecting the plug from the wall outlet.- This may cause a fire.If an outside antenna is connected to the unit, do not let therain water get into the unit by bending or antenna wire sealing- This may cause an electric shock or fire.Unplug the unit from the wall outlet before cleaning. Use asmooth cloth. Do not use industrial chemicals.- This may cause an electric shock or fire.If the connector between the plug and the pin is dusty ordirty, clean it. Do not spray detergent directly on the unit.- This may cause an electric shock or fire.Do not touch the antenna wire and disconnect the plug fromthe electrical outlet during storms or lightening.- This may cause an electric shock or fire.Disconnect the plug from the outlet if it is not used for a longperiod of time.- This may cause an electric shock or fire.
5Table of ContentsSafety Instructions ....................................................................................................................3Unpacking your TV ....................................................................................................................6Viewing the Control Panels (Front View) ...................................................................................7Viewing the Control Panels (Rear View) ....................................................................................8Remote Control .........................................................................................................................9Inserting Batteries in the Remote Control .................................................................................10Connecting an Antenna or Cable ..............................................................................................10Connecting to the RCA or S-Video Input (AV1 or AV2) ............................................................11Connecting to a DVD or DTV Set-Top Box Input  ......................................................................11Connecting to the RCA Input (AV3) ..........................................................................................12Connecting a Second VCR to Record from the TV (LINE-OUT) ...............................................12Connecting the Power Cord and Switching the TV On/Off ........................................................13Selecting a Picture from External Sources.................................................................................13Selecting your Language ...........................................................................................................13Storing Channels in Memory .....................................................................................................14Setting the Parental Lock ..........................................................................................................15Customizing the Picture ............................................................................................................19Customizing the Sound  .............................................................................................................20Adjusting the Speaker Volume & Selecting the Speaker Sound Source ...................................21Listening to Stereo Sound/SAP .................................................................................................22Setting the Sound Effect ............................................................................................................22Setting the Date & Time  ............................................................................................................23Displaying the Current Time ......................................................................................................23Setting the Preset Time (On/Off) ...............................................................................................24Setting the Sleep Timer .............................................................................................................24Viewing the Closed Captions ....................................................................................................25Setting Restrictions On Button Input .........................................................................................25Setting the OSD Display Time ...................................................................................................26No Key Operation Auto Power Off ............................................................................................26No Signal Auto Power Off .........................................................................................................27Watching your Favorite Channels .............................................................................................27Reducing Picture Noise .............................................................................................................28Displaying the TV Information  ...................................................................................................28Display the Picture in Picture (PIP) ...........................................................................................29Changing the Picture Size .........................................................................................................31Display a Still Image ..................................................................................................................31Connecting to the PC  ................................................................................................................32Setting the PC Software ............................................................................................................33Adjusting the Screen Position ...................................................................................................34 Reload Geometry Values ..........................................................................................................34Adjusting the Screen Color ........................................................................................................35Standard Display Mode .............................................................................................................36Troubleshooting .........................................................................................................................37Specifications .............................................................................................................................39
6Unpacking your TVRemote Control & Batteries (AAA x 2) Operating Instructions Power CordAccessoriesBatteryBatteryPlease make sure the following items are included with your TV set. if any items are missing, contact your dealer.1203475869PIPMENUTV/AVINFOMUTEPREVIEWSOUNDMTSVOLUMESLEEPON/OFFHIGH/LOWPROTECTIONPC.AUTOCAPTIONTTX/MIXINDEXLIST/FLOFSTOREHOLDSIZEREVEALSUB PAGESOURCESIZESWAPCHANNELPICTUREASPECTSTILLPOWER
7INPUT MENU -         VOL         + <         CH         >Viewing the Control PanelsԽԾԿՀՁTOP SideՃՄFront ViewԽԾԿՀՁՂՃՄInput source selection buttonMENU selection buttonVolume adjustment buttonChannel selection buttonRemote control sensorPower IndicatorPower buttonSpeakerPower Indicator  StatusIndicatorRedGreen Green blinking StatusStand-byPower on Remote controlՂ
Bottom Side8Viewing the Control PanelsRear ViewRight Side 1 LRAV2 INPUTAC INPUT RGBY      Pb     Pr      L      R       VIDEOL        RANTDTV/DVDAudio1. AC INPUT2. RGB Video Input Connector (PC)3. DTV/DVD Video (Y/Pb/Pr) Input4. DTV/DVD Audio Input(L/R5. Antenna Input Jack6. AV1 VIDEO Input 7. AV1 AUDIO Input(L/R)S-VIDEOVIDEOHeadphone JackAudioRight Side 2 LRAVOUTVIDEOAudioRight Side 3LRAV3 OUTS-VIDEOVIDEOAudio1 2 3 4 5 6 7
9Remote ControlPower On/Off buttonNumeric buttonsPrevious ChannelON Screen Display andMENUand  (Channel Up / Down  and Volume Up /Down)Favorite Channel Selection(See page 27)Picture Still (See page 31)Picture Size Selection(See page 31)Picture Mode Selection   (See page 19)Sleep Timer (See page 24)Sound Mode Selection (See page 20)ԽԾԿՀՁՂՃՄՅՆTemporary Sound MuteExternal Source Input Selection(See page 13 )Closed Captions (See page 25)MENU ConfirmationPIP Functions:(See page 29~30)-PIP On/Off-Position Selection (Position)-Size Selection (Size)-Picture Mode Selection (P.Mode)-Swapping main and subpicture (Swap)-Selecting the Input Source(INPUT)Sound Selection :Mono/Stereo/SAP(See page 22)Sound Effect Selection (See page 22)Clock Display (See page 23)TV Information Display(See page 28)Add or Erase Channels in theTV’s Memory (See page 14)ՇՈՉՊՋՌՍՎՏՐ-  Makes  sure  there  are  no  objects  between  the  remote  control  and  its  sensor.-  Don't  place  the  remote  control  near  a  heater  or  in  damp  place.  -  A  strong  blow  to  the  remote  control  may  cause  it  not  to  operate.1 203475869MENULT-260WOKMUTECCPCSTILL ASPECT SLEEPS.MODEP.MODEMTSFAVORITEPIP INPUTSIZE POSITION P.MODE SWAPDISPLAY CLOCK ADD/ERASES.EFFECTDTV VIDEO STILLPOWERQ.View󰞡➋󰞣󰞢➐➒󰞧➓󰞪󰞨󰞤󰞥➏➑➎➍󰞩󰞦➌➊
ANTorCable Television       NetworkRear of the TV10Inserting Batteries in the Remote ControlInsert two AAA-size batteries (supplied) by matching the +and -on the batteries to the diagram inside the battery compartment.Handle the remote control with care; avoid dropping it,getting it wet, placing it direct sunlight, near a heater, or where the humidity is high .Remove the batteries to avoid damage from possible batteryleakage whenever you anticipate that the remote control will not be used for an extended period.1Connect the antenna or input cable to the 75 coaxial input on the rear of the TV.If you are using an indoor antenna, you may need to turn it when tuning your television until you receive a clear picture.12You must insert or replace the batteries in the remote control when you purchase the TVor when you find that the remote control is no longer operating correctly.To view television channels correctly, a signal must be received by the set from one ofthe following sources: an outdoor antenna, a cable television system or a satellite dish.Connecting an Antenna or Cable
11Connecting to the RCA or S-Video Input ( AV1 or AV2 )Connecting to a DVD or DTV Set-Top Box INPUTRear of the TV (A) For RCA Input(A) For RCA Input1.  Connect the RCA cable to the input jacks (Video+ Audio L/R of AV1 or AV2) on the TV andoutput jacks on the external equipment such as a VCR, camcorder and some Video gamedevices.(B) For S-Video Input1.  Connect the S-Video/RCA (audio L/R of AV1 or AV2) cable to the input jacks on the TV andoutput jacks on the external equipment such as a VCR, camcorder and some video gamedevices.2.  If the external equipment has mono audio output, connect it only to left jack of the Audio   Input/Output.S-Video VIDEO LRAV1VIDEOLRS-VideoVCRCamcorderVideo game device(B) For S-Video InputRear of the TV1.  Connect the video cables to the Y, Pb, Pr input jacks (DTV/DVD) on the TV and the Y, Pb, Pr output jacks on the DVD or DTV Set-Top Box.2.   Connect the audio cables to the Audio L/R input jacks (DTV/DVD) on the TV and the Audiooutput jacks on the DVD or DTV Set-Top Box.YPb Pr L RDTV/DVDVideo CableAudio CableDVD/DTV STB
12Connecting to the RCA Input ( AV3 )Rear of the TVYour TV can send out signals of its picture and sound to be recorded by a second VCR.To do this, connect your second VCR as follows: (The VCR input jacks might be either on the front or on back of the VCR.)1.  Connect a set of audio cables between the AUDIO OUT jacks on the TV and the AUDIO IN  jacks on the VCR.2.  Connect a video cable between the VIDEO OUT jack on the TV and the VIDEO IN jack onthe VCR.Refer to your VCR’s instructions for more inforation about how to record using this kind ofconnection.VIDEO LRLINE-OUTVCRAudioRear of the TV1.  Connect the RCA cable to the input jacks (Video+ Audio L/R of AV3) on the TV and outputjacks on the VCR.2.  If the external equipment has mono audio output, connect it only to left jack of the Audio   Input/Output.VIDEO LRAV3VCRAudioConnecting a Second VCR to Record from the TV(LINE-OUT)
13Connecting the Power Cord and Switching the TV On / OffSelecting a Picture from External SourcesConnect the AC Power cord to AC input.Connect the power cord for your TV to the power input on theback of your TV.Plug the power cord for the TV into a nearby outlet.Press the POWER, CH or INPUT button on the front panel of your set or press the POWER(      ), CHANNEL( ), INPUT(      ), or Number (0~9) button on the remote control.  The LED lamp will blink and  your TV will be turned on. To switch your TV off, press the POWER(      ) button again1234<         CH         >5PowerMake sure all the necessary connections have been made.Press the POWER () button to switch the device on.Select the favorite source by pressing the INPUT button one or more times.The Input Source (      ) is displayed in following order : TV  AV1 VIDEO  AV1 S-VHS  AV2 VIDEO AV2 S-VHS  AV3 VIDEO  DTV  PC TVThe Video(      ) is displayed in the following order :                TV  AV3 VIDEO  AV2 S-VHS  AV2 VIDEO AV1 S-VHS  AV1 VIDEO  TV123INPUT MENU -         VOL         +After your various systems (audio and video) have finished, you can view any of thesources by selecting the appropriate external input.Selecting your LanguagePictureSoundClockInstallLanguageAdvancedMENU : Previous                : SelectINPUT : Exit                  OK : Select      : PositionPress the MENU button.Press the ( button to select the Language and then press the OK or ( button.Select the appropriate language by pressing the  (button and then press the OK or ( button.Press the MENU button to return to the previous menu. 1234When you start using your TV for the first time, you must select the language in which todisplay all on-screen menus.INPUTPowerPowerINPUTVIDEO1 203475869MUTECCPC DTV VIDEO INPUTPOWERQ.View
14Storing Channels in MemoryPress the MENU button. Press the ( button to select Install group and press the (or OK button. To Select the type of signal source that is connected to the TV.Move to Select by pressing ( button and select TV or CATV by pressing ( button.Press the ( button to select Auto tuning, and press the (or OK button.You can stop the Auto tuning by pressing the MENU button during auto tuing.When the Auto tuning is finished, screen will be changed to normal viewing screen automatically.Press the ( button to select Channel and press the(button. The channels will be stored one by one.If you have picture noise on step 3, Press the ( button to select Fine Tuning and press the ( button to adjust the frequency manually.Add or erase the channels from the channel you scanned. Move to Channel by pressing ( button and select channel by pressing ( button.Move to Add/Erase by pressing ( button and select Add or Erase by pressing ( button.123Use  the  Auto  tuning  during  a  broadcast  after  connecting  the  antenna.5PictureSoundClockInstallLanguageAdvancedMENU : Previous                : SelectINPUT : Exit                  OK : Select      : Position  Auto tuning                                  Select                                           TV  Channel                                          7  Fine Tuning                            175.25  Add/Erase                                   Add  Parental Lock                         _ _ _ _InstallMENU : Previous                : AccessINPUT : Exit                  OK : Access      : Position6  Auto tuning                                  Select                                           TV  Channel                                          7  Fine Tuning                            175.25  Add/Erase                                   Add  Parental Lock                         _ _ _ _InstallMENU : Previous                : AccessINPUT : Exit                  OK : Access      : Position  Auto tuning                                  Select                                      CATV  Channel                                          7  Fine Tuning                            175.25  Add/Erase                                   Add  Parental Lock                         _ _ _ _InstallMENU : Previous                : AccessINPUT : Exit                  OK : Access      : Position  Auto tuning                                  Select                                      CATV  Channel                                          7  Fine Tuning                            175.25  Add/Erase                                   Add  Parental Lock                         _ _ _ _InstallMENU : Previous                : AccessINPUT : Exit                  OK : Access      : Position7  Auto tuning                                  Select                                      CATV  Channel                                          7  Fine Tuning                            175.25  Add/Erase                                   Add  Parental Lock                         _ _ _ _InstallMENU : Previous                : AccessINPUT : Exit                  OK : Access      : Position4You  can  get  the  same  result  by  pressing  the  (                )  button  on  the  remote  control.Add/EraseMENUOKFAVORITE
15Setting the Parental LockPress the MENU button.Press the ( ) button to select the Install group and press the ( ) or OK button.Press the ( ) button to select the Parental Lock and Enteryour 4-digit password.Press the ( ) button to set Parental Lock.You can select these options in the following order.Off Child Youth Young Adult CustomOff : Parental lock is disabled. All programs are unblocked from viewing.  Child : The permitted Maximum ratings are TV-Y, TV-G, G. Youth : The permitted Maximum ratings are TV-PG, PG.Young Adult : The permitted Maximum ratings are TV-14, PG-13.Custom : Select to set ratings manually.1234PictureSoundClockInstallLanguageAdvancedMENU : Previous                : SelectINPUT : Exit                  OK : Select      : Position  Parental Lock                             Off  Movie Rating                         PG-13  General                                  TV-14  Children                              Unblock  Content Block  Not Rated                           Unblock  AV Sources                         Unblock Change Password                    - - - -InstallMENU : Previous                : SelectINPUT : Exit       : PositionPress the MENU button. Press the ( button to select Install group and press the (or OK button. Press ( button to select the Parental Lock and Enteryour 4-digit password.Press the ( )  button to select the Movie Rating and pressthe ( ) button to set the restriction ratings.You can select these options in the following order.GPG PG-13 RNC-17 XUnblockG: All children and General audience. PG : Parental guidance suggested.PG-13 : Parental guidance for children under 13.R: Restricted viewing, parental guidance is suggested for children under 17.NC-17 : No children under age 17.X: Adults only.Unblock : Not rated.123Setting up restrictions using the MPAA ratings system.4  Parental Lock                             Off  Movie Rating                         PG-13  General                                  TV-14  Children                              Unblock  Content Block  Not Rated                           Unblock  AV Sources                         Unblock Change Password                    - - - -InstallMENU : Previous                : SelectINPUT : Exit       : PositionThe  default  password  for  a  new  TV  set  is  “0119”.MENUOKFAVORITE
16Setting the Parental LockPress the MENU button. Press the ( button to select Install group and press the (or OK button. Press ( button to select the Parental Lock and Enteryour 4-digit password.Press the ( ) button to select the General and press the() button to set the restriction ratings.You can select these options in the following order.TV-G TV-PG TV-14 TV-MA UnblockTV-G : General audience.TV-PG : Parental guidance suggested.TV-14 : Parents strongly cautioned.TV-MA : Mature audience.Unblock : Not rated.123Setting up restrictions using the TV guidelines (Age-Based)Press the MENU button. Press the ( button to select Install group and press the (or OK button. Press ( button to select the Parental Lock and Enteryour 4-digit password.Press the ( ) button to select the Children and press the () button to set the restriction ratings.You can select these options in the following order.TV-Y TV-Y7 UnblockTV-Y : Young children.TV-Y7 : Child 7 and over.Unblock : Not rated.123TV Program for Children44PictureSoundClockInstallLanguageAdvancedMENU : Previous                : SelectINPUT : Exit                  OK : Select      : Position  Parental Lock                             Off  Movie Rating                         PG-13  General                                  TV-14  Children                              Unblock  Content Block  Not Rated                           Unblock  AV Sources                         Unblock Change Password                    - - - -InstallMENU : Previous                : SelectINPUT : Exit       : Position  Parental Lock                             Off  Movie Rating                         PG-13  General                                  TV-14  Children                              Unblock  Content Block  Not Rated                           Unblock  AV Sources                         Unblock Change Password                    - - - -InstallMENU : Previous                : SelectINPUT : Exit       : PositionMENUOKFAVORITE
17Setting the Parental LockPress the MENU button. Press the ( button to select Install group and press the (or OK button.Press ( button to select the Parental Lock and Enteryour 4-digit password.Press the ( ) button to select the Content Block and pressthe ( ) button.Press the ( ) button to select sub-rating mode of content Block. Press the ( ) button. You can select one of the restriction ratings in the each sub-rating mode.124Setting up restrictions using the TV guidelines (Content -Based)5Sub-ratingsF ViolenceDialogueLanguageSex. ScenesViolenceRestrictive ratingsTV- Y7  UnblockTV- PG  TV-14  UnblockTV- PG  TV-14  TV-MA  UnblockTV- PG  TV-14  TV-MA  UnblockTV- PG  TV-14  TV-MA  UnblockPictureSoundClockInstallLanguageAdvancedMENU : Previous                : SelectINPUT : Exit                  OK : Select      : Position  Parental Lock                             Off  Movie Rating                         PG-13  General                                  TV-14  Children                              Unblock  Content Block  Not Rated                           Unblock  AV Sources                         Unblock Change Password                    - - - -InstallMENU : Previous                : SelectINPUT : Exit       : Position3  Parental Lock                             Off  Movie Rating                         PG-13  General                                  TV-14  Children                              Unblock  Content Block  Not Rated                           Unblock  AV Sources                         Unblock Change Password                    - - - -InstallMENU : Previous                : SelectINPUT : Exit       : PositionPress the MENU button. Press the ( button to select Install group and press the (or OK button. Press ( button to select the Parental Lock and Enteryour 4-digit password.Press the ( ) button to select the Not rated and press the () button to set Block/ Unblock.Block : When TV signal or movies display without restriction ratings, TV or Movies signal will be blocked, and a blank screen will be displayed. Unblock : When TV signal or movies display withoutrestriction ratings, All signals will be unblocked, and you can view any other program 123Block/ Unblock of Not rated program4MENUOKFAVORITE
18Press the MENU button. Press the ( button to select Install group and press the (or OK button. Press ( button to select the Parental Lock and Enteryour 4-digit password.Press the ( ) button to select the AV Sources and press the ( ) button to set Block/ Unblock.Block : Blocks all AV sources.Unblock : Unblock all AV sources. 1Block/ Unblock the AV SourcesPress the MENU button. Press the ( button to select Install group and press the (or OK button. Press ( button to select the Parental Lock and Enteryour 4-digit password.press the ( ) button to select the change password and Enter you new password. (4-digit)123Changing the PasswordSetting the Parental Lock234  Parental Lock                             Off  Movie Rating                         PG-13  General                                  TV-14  Children                              Unblock  Content Block  Not Rated                           Unblock  AV Sources                         Unblock Change Password                    - - - -InstallMENU : Previous                : SelectINPUT : Exit       : Position  Parental Lock                             Off  Movie Rating                         PG-13  General                                  TV-14  Children                              Unblock  Content Block  Not Rated                           Unblock  AV Sources                         Unblock Change Password                    - - - -InstallMENU : Previous                : SelectINPUT : Exit       : Position4
19Press the MENU button.Press the ( button to select the Picture group and press the ( or OK button.Pre-set mode will be displayed.The picture mode will change whenever you press the (button.Standard : Select when it is bright around the TV.Sports     : Select when you want to get a clearer picture or watch sports.Natural    : Select when viewing movies or live music.Mild         : Select when it is dark around the TV or at night.Custom   : Select if you want to adjust the settings manually. Otherwise, if you are viewing contents of the PIP function, whenever you press the (      ) button, the picture mode willchange as above.Press the ( button to move to the MENU that you wish to adjust.Press the ( button to adjust Contrast     : Adjusts the clarity of the whole screenBrightness : Adjusts the brightness of the whole screenSharpness : Corrects the contours of the imageColor          : Adjusts the color saturation of the image Tint             : Adjusts the colors of the image12345If  you  adjust  the  TV  in  step  5  while  it  is  in  Standard,  Sports,  Natural  or  Mild  mode,  the  mode  will  change  to  Custom  mode.PictureSoundClockInstallLanguageAdvancedMENU : Previous                : SelectINPUT : Exit                  OK : Select      : Position Mode                                   Standard Contrast Brightness Sharpness Colour TintPicture795028500MENU : Previous                : SelectINPUT : Exit      : Position Mode                                     Custom Contrast Brightness Sharpness Colour TintPicture885042600MENU : Previous                : SelectINPUT : Exit      : PositionYou can select an appropriate picture mode by pressing the ( button in Picturemode.Customizing the PictureYou  can  get  the  same  result  by  pressing  the  (              )  button  on  the  remote  control.P.ModeP.ModeMENUOKFAVORITEPCSTILL ASPECT SLEEPS.MODEP.MODEMTS DISPLAY CLOCK ADD/ERASES.EFFECTDTV VIDEO INPUT

Navigation menu