Hyundai IBT LT26AW000 26 Inches LCD/TV Monitor User Manual 1

Hyundai IBT Corp. 26 Inches LCD/TV Monitor 1

Contents

User Manual 2

FCC ID : PJILT26AW000 REPORT NO. : HCT-F04-0303 HYUNDAI C–TECH ATTACHMENT E -2. - USER’S MANUAL -
20Customizing the SoundPress the MENU button. Press the ( button to select the Sound group and press the ( or OK button.Press the ( button to select Balance and press the(button to adjust the sound balance.Press the ( button to select Equalizer and press the (button.Press the ( button to select the sound mode according to the type of image being watched.Sound mode will be change in the following order.Standard Music Film Speech CustomStandard : This is good for any picture.Music : Select when you listen to music, videos or concerts.Film : Select when you watch the a movie.Speech : Select when you listen to speeches or news.Custom : Select when you want to adjust the settingmanually.Press the ( button to select Custom and press the (button to select the frequency that you want to adjust. The frequency range will be selected as following order.100 300 1K 3K 10KPress the ( button to adjust.12367If you adjust the frequency (100Hz, 300Hz, 1KHz, 3KHz,10KHz) in Standard, Music, Film, Speech, or Custom mode, the mode will change to Custom mode.45PictureSoundClockInstallLanguageAdvancedMENU : Previous : SelectINPUT : Exit OK : Select : Position Balance R5 Equalizer Volume 8 Input Source Main SoundMENU : Previous : AdjustINPUT : Exit : Position Mode Standard Music Film Speech Custom>>100Equalizer3001K3K10KMENU : Previous : SelectINPUT : Exit : PositionYou can get the same. result by pressing the ( ) button on the remote control.S.ModeMENUOKFAVORITEPCSTILL ASPECT SLEEPS.MODEP.MODEMTS DISPLAY CLOCK ADD/ERASES.EFFECTDTV VIDEO INPUT
21Adjusting the Speaker Volume & Selecting the Speaker Sound SourcePress the MENU button.Press the ( button to select the Sound group and press the ( or OK button.Press the ( button to select Volume (speaker).Press the ( button to adjust the speaker volume.Press the ( button to select the Input Source of the speaker. Press the ( button to select the sound source of the speaker.Main PIP TV AV1 AV2 DTV12345- You will have sound only through the headphones, not the speakers, if you connect headphones. (mute) You can adjust the headphones' volume by pressing the (button.- You can listen to the main picture's sound when the PIPis off even if you select PIP mode sound.6PictureSoundClockInstallLanguageAdvancedMENU : Previous : SelectINPUT : Exit OK : Select : Position Balance R5 Equalizer Volume 8 Input Source Main SoundMENU : Previous : AdjustINPUT : Exit : PositionWhen you would like to have sound through the headphones, if you connect a set of headphones to your TV, the volume level will be decreased automatically without concerning the previous volume setting. Balance R5 Equalizer Volume 8 Input Source Main SoundMENU : Previous : AdjustINPUT : Exit : PositionMENUOKFAVORITE
22Listening to Stereo Sound / SAPListening to Stereo Sound / Secondary Audio ProgramYou can select sound options (Mono, Stereo, SAP, Mono+SAP) depending on the broadcasting signal by pressing ( )button on the remote control.Choose Stereo for channels that are broadcasting in stereo.Choose Mono for channels that are broadcasting in mono,or if you are having difficulty receiving a stereo signal.Choose SAP to listen to the Secondary Audio Program, which is usually a foreign-language translation.1Press the ( ) button on the remote control to select Off ,Pseudo or Surround.Off ,Pseudo or Surround will be selected in turn whenever you press this button.Off : Turn off the sound effect.Pseudo : You can listen to Pseudo stereo sound, which is created from Mono sound.Surround : This features allows the TV’s L/R Speakers to provide a home Theater-like surround effect.The center and surround sounds ard mixed intothe L/R speakers.1You can adjust this only with the remote control. Setting the Sound EffectS.EffectDepending on the particular program being broadcast, you can listen to stereo, mono,or a Secondary Audio Program. (SAP audio is usually a foreign-language translation.Sometimes SAP has unrelated information like news or weather.)OptionBroadcastingMSM+SAPS+SAPMSMSMMSAPSAPMSM+SAPM+SAPM S SAP M+SAP MMMMMonoStereoS : StereoM : monoSAP : Secondary Audio ProgramM + SAP : Mono + SAPS + SAP : Stereo + SAPڹDisplays present receivedsound state.ںWhen you select sound optionsusing the ( ) button.ڹںMTSMTSPCSTILL ASPECT SLEEPS.MODEP.MODEMTS DISPLAY CLOCK ADD/ERASES.EFFECTDTV VIDEO INPUTMTS DISPLAY CLOCK ADD/ERASE
23Setting the Date & TimePress the MENU button.Press the ( button to select Clock and press the (or OK button.Press the ( button to move between year Month Date.Press the ( or number (0~9) buttons to adjust the year and repeat the above steps 3-4 to adjust the Month and Date in the same way. You can erase and reset the Date by pressing the OKbutton.Press the ( button to select Clock and press the OK or (button to move to time adjust.Press the ( or number (0~9) buttons to adjust the Hour and Minute.Adjust the Hour using the 24-hour system.Example : 6 P.M. Press 1 and 8You can erase and reset the and hour and minute by pressing the OK button.123456PictureSoundClockInstallLanguageAdvancedMENU : Previous : SelectINPUT : Exit OK : Select : Position Date 03/01/01 Clock - - : - - Wake Up Clock - - : - - Channel - - - Volume 20 Off Time - - : - -ClockMENU : Previous : AdjustINPUT : Exit 0-9 : Adjust : PositionDisplaying the Current TimePress ( ) button on the remote control to display thecurrent time.1This function is available after you set the clock first.ClockPM 07:30MENUOKFAVORITEMTS DISPLAY CLOCK ADD/ERASE
24Setting the Preset Time ( On / Off )This function is available after you set the clock first.PictureSoundClockInstallLanguageAdvancedMENU : Previous : SelectINPUT : Exit OK : Select : Position Date 03/01/01 Clock - - : - - Wake Up Clock - - : - - Channel - - - Volume 20 Off Time - - : - -ClockMENU : Previous : AdjustINPUT : Exit 0-9 : Adjust : PositionPress the MENU button.Press the ( button to select Clock and press the (or OK button.Press the ( button to select Clock in the Wake up modeand press the ( button to select the Hour or Minute.Press the ( or number (0~9) buttons to adjust the Hour and Minute.You can erase and reset the Hour and Minute by pressing the OK button.Press the ( button to move to Channel and press the(button. Press the ( or number (0~9) button to select the channel.You can erase and reset the channel by pressing the OKbutton.Press the ( button to select Volume and press the (button to adjust the volume.Press the ( button to select Off time.Press the ( button to move to the Hour or Minute. Press the ( or number (0~9) button to adjust the Hour or Minute and then press the ( button.You can erase and reset the Hour and Minute by pressing the OK button.123456789Press the ( ) button.Whenever you press this button the sleep timer will select times in the following order. Sleep off Sleep5 Sleep10 Sleep20 Sleep30Sleep60 Sleep90 Sleep120 Sleep180.1Setting the Sleep TimerSleepMENUOKFAVORITEPCSTILL ASPECT SLEEPS.MODEP.MODEMTS DISPLAY CLOCK ADD/ERASES.EFFECTDTV VIDEO INPUT
25Viewing the Closed CaptionsSetting Restrictions On Button InputSetting the Closed CaptionsPress the MENU button.Press the ( button to select the Advanced group and press the ( or OK button.The Advanced group are displayed with Caption selected.Press the ( button to set the Closed Captions.You can select these options in the following order.Off CC1 CC2 CC3 CC4 Text1 Text2Text3 Text4123Press the MENU button.Press the ( button to select the Advanced group and press the ( or OK button.Press the ( button to select Local Lock.Press the ( button to select Off, Once or Always and press the MENU button.Off : With the lock function off, you can control the TV with both the remote control and the buttons on the TV.Once: The lock function will turn off automatically after you turn the TV on/off once with the remote control.Always: With the lock function always on, you can control the TV only with the remote control, not with the buttons on the TV.1234This function prevents children from controlling the TV when parents are not home.It is available after setting this function with the remotecontrol.PictureSoundClockInstallLanguageAdvancedMENU : Previous : SelectINPUT : Exit OK : Select : PositionCaption CC1Local Lock OffOsd Timeout 60No Operation Timeout 180No Signal Timeout 20Favorite Channel NR OnAdvancedMENU : Previous : SelectINPUT : Exit : PositionQ.View 0 CCPictureSoundClockInstallLanguageAdvancedMENU : Previous : SelectINPUT : Exit OK : Select : PositionCaption OffLocal Lock OffOsd Timeout 60No Operation Timeout 180No Signal Timeout 20Favorite Channel NR OnAdvancedMENU : Previous : SelectINPUT : Exit : PositionYou can get the same result by pressing the ( ) button on the remote control.CCMENUOKFAVORITE
26Setting the OSD Display TimeNo Key Operation Auto Power OffAutomatically turns the power off if there is no button pressed for a period of time after AUTO Wake-Up turns the power on.Press the MENU button. Press the ( button to select the Advanced group and press the ( or OK button. Press the ( button to select Osd Timeout.Press the ( button to adjust the display time. Whenever you press this button, you can adjust it in 5- second increments from 0 to 60 seconds.If you finish setting the time, press the MENU button. 1234- If you do not press the MENU button after adjusting the OSD timeout, the menu screen will disappear automatically after the set time. - If you set 0, menu screen will not disappear automatically.5Caption CC1Local Lock OffOsd Timeout 60No Operation Timeout 180No Signal Timeout 20Favorite Channel NR OnAdvancedMENU : Previous : SelectINPUT : Exit : PositionPress the MENU button.Press the ( button to select the Advanced group and press the ( or OK button.Press the ( button to select No Operation Timeout. Press the ( button to adjust the auto power off time. You can adjust it in 30-minute increments from 0 to 180 minutes.( 0 30 60 90 120 150 180 )If you set the time to 0, the TV will not use the auto power off function. 1234Caption CC1Local Lock OffOsd Timeout 60No Operation Timeout 180No Signal Timeout 20Favorite Channel NR OnAdvancedMENU : Previous : SelectINPUT : Exit : Position
27No Signal Auto Power OffWatching your Favorite ChannelsPress the MENU button.Press the ( button to select the Advanced group and press the ( or OK button. Press the ( button to select No Signal Timeout. Press the ( button to adjust the auto power off time. You can adjust it in 1-minute increments from 0 to 20 minutes.( 0 1 2 ... 18 19 20 ) If you set the time to 0, the TV will not use the auto power off function. 1234Caption CC1Local Lock OffOsd Timeout 60No Operation Timeout 180No Signal Timeout 20Favorite Channel NR OnAdvancedMENU : Previous : SelectINPUT : Exit : PositionAutomatically turns the power off if there is no broadcast signal or button pressed forsome time. Press the MENU button.Press the ( button to select the Advanced group and press the ( or OK button. Press the ( button to select a Favorite channel. Press the ( button to move the position and press the (button to select Channel No, AV, etc.You can select up to 5 Channel No, AV,etc. You can direct select input sources by pressing the PC, DTV and VIDEO button or select them by pressing the or button.The input sources are changed in following order.Pr00 Pr99 AV1 VIDEO AV1 S-VHS AV2 VIDEOAV2 S-VHS DTV PC also, you can direct input program No. by press numeric button (0~9).You can delete the selection by pressing the OK button and pressing the number or ( ) buttons to select the channel.The selection will switch whenever you press the Favoritebutton on the remote control.1234Caption CC1Local Lock OffOsd Timeout 60No Operation Timeout 180No Signal Timeout 20Favorite Channel NR OnAdvancedMENU : Previous : SelectINPUT : Exit : PositionQ.ViewCh 1Ch 3Ch 4Ch 7Ch 9Favorite Channel MENU : Previous : AdjustINPUT : Exit 0-9 : Adjust : Position
28Reducing Picture NoiseUse this function when you have a bad image with the picture noise.Caption CC1Local Lock OffOsd Timeout 60No Operation Timeout 180No Signal Timeout 20Favorite Channel NR OnAdvancedMENU : Previous : SelectINPUT : Exit : PositionPress the MENU button. Press the ( button to select the Advanced group and press the ( or OK button.Press the ( button to select NR. Press the ( button to select On.Whenever you press the ( button, the selection will switch between On or Off. 123Displaying the TV InformationPress the ( ) button on the remote control to display the current channel, time, audio, and sleep timer setting.1DisplayCATV 7PM 07:30MonoSleep 30MTS DISPLAY CLOCK ADD/ERASE
29Display the Picture in Picture ( PIP )Press the PIP( ) button. You will see the PIP in the at upper right corner.Press the ( ) button to select the external signal source for the PIP.The external signal source will display whenever you press the ( ) button.( TV AV1 VIDEO AV1 S-VHS AV2 VIDEO AV2 S-VHS DTV PC )Changing the PIP PositionPress the ( ) button on the remote control.The PIP position will change among 5-positions whenever you press this button. 12You can change the main picture channel by pressing the(button. MAIN 7AM 10:28Sub AV1 VIDEO8QX5IQV<>>1,-7;>QLMW,<>8+777777777777777<>>1,-7;>QLMW ,<>8+PIP777@@777@@154312PIPINPUTINPUTPositionOKPIP INPUTSIZE POSITION P.MODE SWAPOKPIP INPUTSIZE POSITION P.MODE SWAP
30Display the Picture in Picture (PIP )Changing the PIP SizePress the ( ) button on the remote control.The PIP will change among 6 different sizes whenever you press this button. Changing the PIP ModePress the ( ) button on the remote control.The PIP mode will change whenever you press this button. Standard Sports Natural Mild CustomSwapping the Main & Sub-Picture Press the ( ) button on the remote controller.The Main image and PIP image will switch with each other whenever you press this button. 111SizeP.ModeSwapOKPIP INPUTSIZE POSITION P.MODE SWAPOKPIP INPUTSIZE POSITION P.MODE SWAPOKPIP INPUTSIZE POSITION P.MODE SWAP
31Changing the Picture SizeDisplaying a Still ImagePress the ( ) button on the remote control.When you are viewing watch the Main image:The image will change as shown below whenever you press this button. (16:9 4:3 Zoom Panorama)When you are viewing the main and PIP images at the same time:The PIP image will change only from 4:3 to 16:9.116 : 9 4 : 3PanoramaZoomPress the Still ( ) button on the remote control.The picture does not move but the sound plays normally.Press this button again if you want to go back to a normal picture. 1AspectStillPCSTILL ASPECT SLEEPS.MODEP.MODEMTS DISPLAY CLOCK ADD/ERASES.EFFECTDTV VIDEO INPUTPCSTILL ASPECT SLEEPS.MODEP.MODEMTS DISPLAY CLOCK ADD/ERASES.EFFECTDTV VIDEO INPUT
32To use the TV as a PC DisplayTurn the PC on. Press the PC or ( ) button on the remote control to select the PC.Set up the PC software. (See page 33 )Adjust the screen in PC Mode. (See page 34 )1234PCAM 11: 25StereoRGB15Pin D-Sub CableRear of the TVRear of the PCConnect the 15Pin D-Sub Cable to the RGB INPUT port on the TV andoutput port on the Rear of the PC.Connecting to the PCINPUTPCSTILL ASPECT SLEEPS.MODEP.MODEMTS DISPLAY CLOCK ADD/ERASES.EFFECTDTV VIDEO INPUT
33Setting the PC SoftwareFirst, click on Settings on the Windows start menu and click on"Control Panel". Double click on the Display icon.Click on the Settings tab on the display dialog-box.Adjust the resolution to 1280x768 pixels.Click the Advanced button and click the Monitor tab on the dialog-box. Set the vertical-frequency to 60Hz and then click the OK button.12345- Maximum resolution depends on the Video Card.- Maximum supported resolution is 1024 X 768 @ 75Hz ,You can get the best picture at 1024 X 768@ 60Hz.- There are 16,770,000 supported colors.
34GeometryPictureSoundClockLanguageAdvancedMENU : Previous : SelectINPUT : Exit OK : Select : PositionAdjusting the horizontal position Press the MENU button.Press the ( button to select the Geometry group and press the ( or OK button.Press the ( button to select H.Position.Move the PC screen to the right or left by pressing the (button.Adjusting the vertical positionPress the ( button to select V.Position.Move the PC screen up or down by pressing the ( button.Adjusting the phasePress the ( button to select the Phase.Press the ( button to adjust the Phase.Reload Geometry ValuesPress the ( button to select Factory Preset.Press the ( button to set the Geometry the factory defaultsettings.11123422 H. Position V. Position Phase Factory PresetGeometry000MENU : Previous : AdjustINPUT : Exit : Position H. Position V. Position Phase Factory PresetGeometry000MENU : Previous : AdjustINPUT : Exit : Position H. Position V. Position Phase Factory PresetGeometry000MENU : Previous : AdjustINPUT : Exit : Position12 H. Position V. Position Phase Factory PresetGeometry000MENU : Previous : AdjustINPUT : Exit : PositionAdjusting the Screen Position
35Adjusting the Screen ColorGeometryPictureSoundClockLanguageAdvancedMENU : Previous : SelectINPUT : Exit OK : Select : Position Mode Custom Contrast Brightness Color HuePictureMENU : Previous : SelectINPUT : Exit : Position50505050 Mode Custom Contrast Brightness Color HuePictureMENU : Previous : SelectINPUT : Exit : Position50505050 Mode Custom Contrast Brightness Color HuePictureMENU : Previous : SelectINPUT : Exit : Position50505050 Mode Custom Contrast Brightness Color HuePictureMENU : Previous : SelectINPUT : Exit : Position50505050Selecting the modePress the ( ) button to select the mode.The modes will change in the following order.Standard Sports Natural Mild CustomAdjusting ContrastPress the MENU button.Press the ( ) button to select the Picture group and press the ( ) or OK button.Press the ( ) button to select Contrast.Press the ( ) button to adjust the contrast.Press the ( )button to make the color darker and the ( )button to make it brighter.Adjusting brightnessPress the ( ) button to select Brightness.Press the ( ) button to adjust the brightness.Press the ( ) button to make the image darker and the () button to make it brighter.Adjusting colourPress the ( button to select Color.Press the ( button to adjust the color.Adjusting tintPress the ( button to select Hue.Press the ( button to adjust the tint.12341121212 Mode Custom Contrast Brightness Color HuePictureMENU : Previous : SelectINPUT : Exit : Position50505050
36If the signal from the system equals the standard signal mode, the screen will adjust automatically. If the signal from the system does not equal the standard signal, adjust the display mode as shown belowreferring to your video card instructions. Otherwise there will be no picture or only power may turn on.ResolutionVGA, 640Ŧ350VGA, 720Ŧ400VGA, 640Ŧ480VGA, 640Ŧ480VGA, 640Ŧ480SVGA, 800Ŧ600SVGA, 800Ŧ600SVGA, 800Ŧ600XGA, 1024Ŧ768XGA, 1024Ŧ768XGA, 1024Ŧ768Horizontal (KHz)31.46931.46931.46937.50037.86137.87946.87548.07748.36356.47660.023Vertical (Hz)70.08670.08759.94075.00072.80960.31775.00072.18860.00470.06975.029Clock Frequency (MHz)25.17528.32225.17531.50031.50040.00049.50050.00065.00075.00078.750Polarity (H/V)Pin PC IN1Red (R)2Green (G)3Blue (B)4Grounding5 Grounding (DDC)6Red (R) Grounding7Green (G) Grounding8Blue (B) Grounding9Reserved10 Sync Grounding11 Grounding12 Data (DDC)13 Horizontal Sync14 Vertical sync15 Clock (DDC)PC Input Connetor(D-sub 15Pin)Standard Display Mode
37TroubleshootingNo picture or sound.Screen is black.Picture is OK but there is no sound.Poor sound quality.No image on a specific channel.Image is not stable and may appear to vibrate , horizontal bars appear. No color on a specific channel (a black & white image).Black or white dots appear on all channels l or a specific channel.ҸMake sure the TV is plugged in.ҸMake sure the power cord is connected to the consent correctly.ҸCheck the power failure.ҸMake sure the external signal source mode is selected.ҸPress the INPUT button to change to TV. ҸPress the Mute button.ҸCheck another channel.ҸPress the button to increase the volume.ҸMake sure the channel using a stereo broadcast by pressing theDisplay( ) button. Select Mono. The sound quality of a stereo broadcast may beunstable in an area with a weak signal. (See page 22 )ҸMake sure the channel selection is correct.ҸChange the antenna direction to the right or left.ҸAdjust the fine tuning of the channel.ҸAdjust the fine tuning of the channel.ҸMake sure there is no powerful electromagnetic wave interferencefrom the transmitting station. ҸStop using a hair drier, electric drill or electric blender .ҸCheck other channels to see if the specific channel is broadcastinga black & white program.ҸAdjust the color. (See page 19)ҸMake sure the antenna is connected correctly. (See page 10) ҸMake sure the status of the antenna or wire is good . ҸAdjust the fine tuning of the channel.For TVDisplay
38no signal messagecable" messagePicture rolls down vertically.A shadowed area appears on the screen.The image is too large or too small.Horizontal or vertical bars appear on the screen. The power indicator light blinks green.ҸCheck if the signal cable(15Pin D-sub) is properly connected tothe computer. (See page 32)ҸThis message may appear when the resolution and frequency of the video card in the computer are out the range of the TV.Select the proper resolution and frequency for the TV.(See page 36)ҸCheck if the signal cable (15Pin D-sub) is properly connected to the computer. (See page 32)ҸMake sure the resolution and frequency of the computer video card are set properly to the range of the TV. Set the picture again referring to the standard display mode and current mode. (See page 36) ҸAdjust the picture to use the screen position feature.(See page 34)ҸAdjust the frequency and fine tuning.ҸAdjust the resolution and frequency to the recommendedspecifications. (See page 36)(1024 x 768 @ 60Hz)ҸThe TV is in power saving mode. The picture will return to normal status when you press any key on the keyboard or move the mouse. For MonitorTroubleshooting
39SpecificationsHHQL260WR26" Diagonal566.4mm (H)Ŧ339.84mm (V)0.4425mm (H) x 0.4425mm (W)1280ŦRGBŦ768a-si TFT active maxrixNTSCNTSC-MCVBS, S-VHS, RGBCOMPONENT : 480i/p, 576i, 720p, 1080i30~61KHz56~75Hz16,770,000 Colors1024Ŧ768TTL, Positive or NegativeAC 110-240V 50/60Hztypical 120W1.8W 814mmŦ490mmŦ236mm (With stand)17.0Kg (With stand)Remote Control, Battery (AAA type), Operating Instructions Power Cord, DC AdapterModel nameSizeDisplay SizePixel PitchPixel NumberTypeBrightnessContrast RatioViewing AngleLCDColor SystemSound SystemVideo SystemY / Pb / PrTV/VIDEODTVPCSync.HorizontalVerticalDisplay ColorMax. ResolutionSync.(H/V Separate)Audio OutputPower SupplyPower ConsumptionPower SavingDimension (WŦHŦD)WeightAccessoriesҸ Design and specifications are subject to change without notice.500 cd / m500 : 1170Ŋ(H) / 170Ŋ(V) 25W(rms) x 2EA

Navigation menu