Hyundai IBT LT26AW000 26 Inches LCD/TV Monitor User Manual 1
Hyundai IBT Corp. 26 Inches LCD/TV Monitor 1
Contents
- 1. User Manual 1
- 2. User Manual 2
User Manual 2
FCC ID : PJILT26AW000 ATTACHMENT E -2. - USER’S MANUAL - REPORT NO. : HCT-F04-0303 HYUNDAI C–TECH Customizing the Sound MENU Press the MENU button. button to select the Sound group and press Press the ( the ( or OK button. FAVORITE 3 Press the ( OK button to select Balance and press the button to adjust the sound balance. Picture Sound Clock Install Language Advanced button to select the sound mode according to the type of image being watched. Sound mode will be change in the following order. Standard Music Film Speech Custom : Select OK : Select Standard : This is good for any picture. Music Film Speech Custom Sound Balance Equalizer Volume Input Source R5 Main MENU : Previous INPUT : Exit : Position : Adjust Equalizer You can get the same. result by pressing the ( on the remote control. S.Mode ) button button to select Custom and press the button to select the frequency that you want to adjust. The frequency range will be selected as following order. 100 100 300 1K 3K 10K MENU : Previous INPUT : Exit : Position 20 : Select when you listen to music, videos or concerts. : Select when you watch the a movie. : Select when you listen to speeches or news. : Select when you want to adjust the setting manually. 6 Press the ( Mode >> Standard Music Film Speech Custom DTV : Select VIDEO INPUT STILL ASPECT SLEEP P.MODE S.MODE S.EFFECT MTS button to select Equalizer and press the 5 Press the ( MENU : Previous INPUT : Exit : Position PC Press the ( button. DISPLAY CLOCK ADD/ERASE 300 Press the ( 1K 3K 10K button to adjust. If you adjust the frequency (100Hz, 300Hz, 1KHz, 3KHz, 10KHz) in Standard, Music, Film, Speech, or Custom mode, the mode will change to Custom mode. Adjusting the Speaker Volume & Selecting the Speaker Sound Source Press the MENU button. 2 Press the ( button to select the Sound group and press or OK button. the ( MENU FAVORITE 3 Press the ( button to select Volume (speaker). 4 Press the ( button to adjust the speaker volume. 5 Press the ( button to select the Input Source of the 6 Press the ( button to select the sound source of the speaker. speaker. Main PIP TV AV1 AV2 DTV - You will have sound only through the headphones, not the speakers, if you connect headphones. (mute) You can adjust the headphones' volume by pressing the button. - You can listen to the main picture's sound when the PIP is off even if you select PIP mode sound. When you would like to have sound through the headphones, if you connect a set of headphones to your TV, the volume level will be decreased automatically without concerning the previous volume setting. OK Picture Sound Clock Install Language Advanced MENU : Previous INPUT : Exit : Position : Select OK : Select Sound Balance Equalizer Volume Input Source MENU : Previous INPUT : Exit : Position R5 Main : Adjust Sound Balance Equalizer Volume Input Source MENU : Previous INPUT : Exit : Position R5 Main : Adjust 21 Listening to Stereo Sound / SAP Depending on the particular program being broadcast, you can listen to stereo, mono, or a Secondary Audio Program. (SAP audio is usually a foreign-language translation. Sometimes SAP has unrelated information like news or weather.) MTS DISPLAY CLOCK ADD/ERASE Listening to Stereo Sound / Secondary Audio Program You can select sound options (Mono, Stereo, SAP, Mono+ SAP) depending on the broadcasting signal by pressing ( button on the remote control. MTS Choose Stereo for channels that are broadcasting in stereo. Choose Mono for channels that are broadcasting in mono, or if you are having difficulty receiving a stereo signal. Choose SAP to listen to the Secondary Audio Program, which is usually a foreign-language translation. Mono Stereo Broadcasting Option M+SAP S+SAP ں ڹ ڹDisplays present received sound state. ںWhen you select sound options using the ( ) button. SAP M+SAP SAP SAP M+SAP M+SAP MTS S : Stereo M : mono SAP : Secondary Audio Program M + SAP : Mono + SAP S + SAP : Stereo + SAP Setting the Sound Effect You can adjust this only with the remote control. PC VIDEO INPUT STILL ASPECT SLEEP P.MODE S.MODE S.EFFECT MTS 22 DTV DISPLAY CLOCK ADD/ERASE Press the ( ) button on the remote control to select Off , Pseudo or Surround. S.Effect Off ,Pseudo or Surround will be selected in turn whenever you press this button. Off Pseudo : Turn off the sound effect. : You can listen to Pseudo stereo sound, which is created from Mono sound. Surround : This features allows the TV’s L/R Speakers to provide a home Theater-like surround effect. The center and surround sounds ard mixed into the L/R speakers. Setting the Date & Time 1 Press the MENU button. 2 Press the ( or button to select Clock and press the ( MENU OK button. FAVORITE 3 Press the ( button to move between year OK Month Date. 4 Press the ( or number (0~9) buttons to adjust the year and repeat the above steps 3-4 to adjust the Month and Date in the same way. You can erase and reset the Date by pressing the OK button. 5 Press the ( button to select Clock and press the OK or button to move to time adjust. 6 Press the ( or number (0~9) buttons to adjust the Hour and Minute. Adjust the Hour using the 24-hour system. Example : 6 P.M. Press 1 and 8 You can erase and reset the and hour and minute by pressing the OK button. Picture Sound Clock Install Language Advanced MENU : Previous INPUT : Exit : Position : Select OK : Select Clock Date Clock Wake Up Clock Channel Volume Off Time 03/01/01 --:---:---20 --:-- MENU : Previous INPUT : Exit : Position : Adjust 0-9 : Adjust Displaying the Current Time This function is available after you set the clock first. Press ( ) button on the remote control to display the current time. Clock MTS DISPLAY CLOCK ADD/ERASE PM 07:30 23 Setting the Preset Time ( On / Off ) This function is available after you set the clock first. Press the MENU button. 2 Press the ( MENU button to select Clock and press the ( or OK button. FAVORITE OK 3 Press the ( and press the ( 4 Press the ( button to select Clock in the Wake up mode button to select the Hour or Minute. or number (0~9) buttons to adjust the Hour and Minute. Picture Sound Clock Install Language Advanced You can erase and reset the Hour and Minute by pressing the OK button. MENU : Previous INPUT : Exit : Position : Select OK : Select 5 Press the ( button to move to Channel and press the button. 6 Press the ( You can erase and reset the channel by pressing the OK button. Clock Date Clock Wake Up Clock Channel Volume Off Time 03/01/01 --:---:---20 --:-- MENU : Previous INPUT : Exit : Position : Adjust 0-9 : Adjust or number (0~9) button to select the channel. button to select Volume and press the ( Press the ( button to adjust the volume. 8 Press the ( button to select Off time. 9 Press the ( button to move to the Hour or Minute. Press the ( or number (0~9) button to adjust the Hour or Minute and then press the ( button. You can erase and reset the Hour and Minute by pressing the OK button. Setting the Sleep Timer PC VIDEO INPUT STILL ASPECT SLEEP P.MODE S.MODE S.EFFECT MTS 24 DTV DISPLAY CLOCK ADD/ERASE Press the ( Sleep ) button. Whenever you press this button the sleep timer will select times in the following order. Sleep off Sleep5 Sleep10 Sleep20 Sleep30 Sleep60 Sleep90 Sleep120 Sleep180. Viewing the Closed Captions Setting the Closed Captions Press the MENU button. Press the ( press the ( Picture Sound Clock Install Language Advanced button to select the Advanced group and or OK button. The Advanced group are displayed with Caption selected. MENU : Previous INPUT : Exit : Position : Select OK : Select Advanced Press the ( button to set the Closed Captions. You can select these options in the following order. Off CC1 CC2 Text3 Text4 CC3 CC4 Text1 Text2 You can get the same result by pressing the ( on the remote control. CC ) button Caption Local Lock Osd Timeout No Operation Timeout No Signal Timeout Favorite Channel NR MENU : Previous INPUT : Exit : Position Off Off 60 180 20 On : Select Q.View CC Setting Restrictions On Button Input Press the MENU button. 2 Press the ( press the ( 3 Press the ( button to select the Advanced group and or OK button. button to select Local Lock. MENU FAVORITE OK 4 Press the ( button to select Off, Once or Always and press the MENU button. Off : With the lock function off, you can control the TV with both the remote control and the buttons on the TV. Once: The lock function will turn off automatically after you turn the TV on/off once with the remote control. Always: With the lock function always on, you can control the TV only with the remote control, not with the buttons on the TV. This function prevents children from controlling the TV when parents are not home. It is available after setting this function with the remote control. Picture Sound Clock Install Language Advanced MENU : Previous INPUT : Exit : Position : Select OK : Select Advanced Caption Local Lock Osd Timeout No Operation Timeout No Signal Timeout Favorite Channel NR MENU : Previous INPUT : Exit : Position CC1 Off 60 180 20 On : Select 25 Setting the OSD Display Time Advanced Caption Local Lock Osd Timeout No Operation Timeout No Signal Timeout Favorite Channel NR MENU : Previous INPUT : Exit : Position CC1 Off 60 180 20 On Press the MENU button. 2 Press the ( press the ( button to select the Advanced group and or OK button. 3 Press the ( button to select Osd Timeout. 4 Press the ( button to adjust the display time. : Select Whenever you press this button, you can adjust it in 5second increments from 0 to 60 seconds. 5 If you finish setting the time, press the MENU button. - If you do not press the MENU button after adjusting the OSD timeout, the menu screen will disappear automatically after the set time. - If you set 0, menu screen will not disappear automatically. No Key Operation Auto Power Off Automatically turns the power off if there is no button pressed for a period of time after AUTO Wake-Up turns the power on. Advanced Caption Local Lock Osd Timeout No Operation Timeout No Signal Timeout Favorite Channel NR MENU : Previous INPUT : Exit : Position CC1 Off 60 180 20 On Press the MENU button. 2 Press the ( press the ( button to select the Advanced group and or OK button. 3 Press the ( button to select No Operation Timeout. 4 Press the ( button to adjust the auto power off time. : Select You can adjust it in 30-minute increments from 0 to 180 minutes. ( 0 30 60 90 120 150 180 ) If you set the time to 0, the TV will not use the auto power off function. 26 No Signal Auto Power Off Automatically turns the power off if there is no broadcast signal or button pressed for some time. Advanced Press the MENU button. 2 Press the ( press the ( 3 Press the ( 4 Press the ( button to select the Advanced group and or OK button. button to select No Signal Timeout. button to adjust the auto power off time. Caption Local Lock Osd Timeout No Operation Timeout No Signal Timeout Favorite Channel NR MENU : Previous INPUT : Exit : Position CC1 Off 60 180 20 On : Select You can adjust it in 1-minute increments from 0 to 20 minutes. ( 0 1 2 ... 18 19 20 ) If you set the time to 0, the TV will not use the auto power off function. Watching your Favorite Channels Advanced Press the MENU button. 2 Press the ( press the ( 3 Press the ( button to select the Advanced group and or OK button. button to select a Favorite channel. 4 Press the ( button to move the position and press the button to select Channel No, AV, etc. You can select up to 5 Channel No, AV,etc. You can direct select input sources by pressing the PC, DTV and VIDEO button or select them by pressing the or button. The input sources are changed in following order. Pr00 Pr99 AV1 VIDEO AV1 S-VHS AV2 VIDEO AV2 S-VHS DTV PC also, you can direct input program No. by press numeric button (0~9). Caption Local Lock Osd Timeout No Operation Timeout No Signal Timeout Favorite Channel NR MENU : Previous INPUT : Exit : Position CC1 Off 60 180 20 On : Select Favorite Channel Ch Ch Ch Ch Ch MENU : Previous INPUT : Exit : Position : Adjust 0-9 : Adjust You can delete the selection by pressing the OK button and pressing the number or ( ) buttons to select the channel. Q.View The selection will switch whenever you press the Favorite button on the remote control. 27 Reducing Picture Noise Use this function when you have a bad image with the picture noise. Advanced Caption Local Lock Osd Timeout No Operation Timeout No Signal Timeout Favorite Channel NR MENU : Previous INPUT : Exit : Position CC1 Off 60 180 20 On Press the MENU button. 2 Press the ( button to select the Advanced group and or OK button. press the ( 3 Press the ( button to select NR. Press the ( button to select On. Whenever you press the ( button, the selection will switch between On or Off. : Select Displaying the TV Information MTS DISPLAY CATV 7 PM 07:30 Mono Sleep 30 28 CLOCK ADD/ERASE Press the ( ) button on the remote control to display the current channel, time, audio, and sleep timer setting. Display Display the Picture in Picture ( PIP ) Press the PIP( ) button. You will see the PIP in the at upper right corner. Press the ( the PIP. PIP INPUT OK PIP INPUT POSITION P.MODE ) button to select the external signal source for SIZE SWAP The external signal source will display whenever you press the ( ) button. ( TV AV1 VIDEO AV1 S-VHS AV2 VIDEO AV2 S-VHS DTV PC ) INPUT MAIN 7 AM 10:28 Sub AV1 VIDEO You can change the main picture channel by pressing the button. PIP 5IQV 8QX <> >1,-7 ;>QLMW ,<> 8+ <>>1,-7;>QLMW ,<>8+ Changing the PIP Position Press the ( Position OK ) button on the remote control. The PIP position will change among 5-positions whenever you press this button. SIZE PIP INPUT POSITION P.MODE SWAP 29 Display the Picture in Picture (PIP ) Changing the PIP Size OK SIZE PIP INPUT POSITION P.MODE Press the ( Size ) button on the remote control. The PIP will change among 6 different sizes whenever you press this button. SWAP Changing the PIP Mode OK SIZE PIP INPUT POSITION P.MODE Press the ( P.Mode ) button on the remote control. The PIP mode will change whenever you press this button. Standard Sports Natural Mild Custom SWAP Swapping the Main & Sub-Picture OK SIZE 30 PIP INPUT POSITION P.MODE Press the ( Swap ) button on the remote controller. The Main image and PIP image will switch with each other whenever you press this button. SWAP Changing the Picture Size PC Press the ( Aspect DTV VIDEO INPUT ) button on the remote control. When you are viewing watch the Main image: The image will change as shown below whenever you press this button. (16:9 4:3 Zoom Panorama) When you are viewing the main and PIP images at the same time: The PIP image will change only from 4:3 to 16:9. 16 : 9 4:3 Zoom Panorama STILL ASPECT SLEEP P.MODE S.MODE S.EFFECT MTS DISPLAY CLOCK ADD/ERASE Displaying a Still Image PC Press the Still ( Still DTV VIDEO INPUT ) button on the remote control. The picture does not move but the sound plays normally. Press this button again if you want to go back to a normal picture. STILL ASPECT SLEEP P.MODE S.MODE S.EFFECT MTS DISPLAY CLOCK ADD/ERASE 31 Connecting to the PC Rear of the PC Rear of the TV RGB 15Pin D-Sub Cable Connect the 15Pin D-Sub Cable to the RGB INPUT port on the TV and output port on the Rear of the PC. To use the TV as a PC Display PC STILL P.MODE MTS DTV VIDEO ASPECT S.MODE DISPLAY INPUT SLEEP S.EFFECT CLOCK ADD/ERASE Turn the PC on. 2 Press the PC or ( INPUT ) button on the remote control to select the PC. 3 Set up the PC software. (See page 33 ) 4 Adjust the screen in PC Mode. (See page 34 ) PC AM 11: 25 Stereo 32 Setting the PC Software First, click on Settings on the Windows start menu and click on "Control Panel". 2 Double click on the Display icon. 3 Click on the Settings tab on the display dialog-box. 4 Adjust the resolution to 1280x768 pixels. 5 Click the Advanced button and click the Monitor tab on the dialog-box. Set the vertical-frequency to 60Hz and then click the OK button. - Maximum resolution depends on the Video Card. - Maximum supported resolution is 1024 X 768 @ 75Hz , You can get the best picture at 1024 X 768@ 60Hz. - There are 16,770,000 supported colors. 33 Adjusting the Screen Position Adjusting the horizontal position Geometry Picture Sound Clock Language Advanced MENU : Previous INPUT : Exit : Position Press the MENU button. 2 Press the ( button to select the Geometry group and or OK button. 3 Press the ( button to select H.Position. press the ( : Select OK : Select 4 Move the PC screen to the right or left by pressing the button. Geometry H. Position V. Position Phase Factory Preset MENU : Previous INPUT : Exit : Position : Adjust Geometry H. Position V. Position Phase Factory Preset MENU : Previous INPUT : Exit : Position : Adjust Adjusting the vertical position Press the ( button to select V.Position. 2 Move the PC screen up or down by pressing the ( button. Geometry H. Position V. Position Phase Factory Preset MENU : Previous INPUT : Exit : Position : Adjust Adjusting the phase Geometry H. Position V. Position Phase Factory Preset MENU : Previous INPUT : Exit : Position Press the ( button to select the Phase. 2 Press the ( button to adjust the Phase. : Adjust Reload Geometry Values Press the ( 2 Press the ( settings. 34 button to select Factory Preset. button to set the Geometry the factory default Adjusting the Screen Color Selecting the mode Press the ( ) button to select the mode. The modes will change in the following order. Standard Sports Natural Mild Custom Geometry Picture Sound Clock Language Advanced MENU : Previous INPUT : Exit : Position : Select OK : Select Adjusting Contrast Picture Press the MENU button. 2 Press the ( the ( ) button to select the Picture group and press ) or OK button. 3 Press the ( ) button to select Contrast. ) button to adjust the contrast. Press the ( Press the ( )button to make the color darker and the ( ) button to make it brighter. Mode Contrast Brightness Color Hue MENU : Previous INPUT : Exit : Position Custom 50 50 50 50 : Select Picture Mode Contrast Brightness Color Hue MENU : Previous INPUT : Exit : Position Custom 50 50 50 50 : Select Adjusting brightness Picture Press the ( 2 Press the ( ) button to select Brightness. ) button to adjust the brightness. Press the ( ) button to make the image darker and the ( ) button to make it brighter. Mode Contrast Brightness Color Hue MENU : Previous INPUT : Exit : Position Custom 50 50 50 50 : Select Picture Adjusting colour Press the ( 2 Press the ( button to select Color. button to adjust the color. Mode Contrast Brightness Color Hue MENU : Previous INPUT : Exit : Position Custom 50 50 50 50 : Select Picture Adjusting tint Press the ( 2 Press the ( button to select Hue. button to adjust the tint. Mode Contrast Brightness Color Hue MENU : Previous INPUT : Exit : Position Custom 50 50 50 50 : Select 35 Standard Display Mode If the signal from the system equals the standard signal mode, the screen will adjust automatically. If the signal from the system does not equal the standard signal, adjust the display mode as shown below referring to your video card instructions. Otherwise there will be no picture or only power may turn on. Resolution Horizontal (KHz) Vertical (Hz) Clock Frequency (MHz) Polarity (H/V) VGA, 640Ŧ350 31.469 70.086 25.175 VGA, 720Ŧ400 31.469 70.087 28.322 VGA, 640Ŧ480 31.469 59.940 25.175 VGA, 640Ŧ480 37.500 75.000 31.500 VGA, 640Ŧ480 37.861 72.809 31.500 SVGA, 800Ŧ600 37.879 60.317 40.000 SVGA, 800Ŧ600 46.875 75.000 49.500 SVGA, 800Ŧ600 48.077 72.188 50.000 XGA, 1024Ŧ768 48.363 60.004 65.000 XGA, 1024Ŧ768 56.476 70.069 75.000 XGA, 1024Ŧ768 60.023 75.029 78.750 PC Input Connetor (D-sub 15Pin) 36 Pin PC IN 10 11 12 13 14 15 Red (R) Green (G) Blue (B) Grounding Grounding (DDC) Red (R) Grounding Green (G) Grounding Blue (B) Grounding Reserved Sync Grounding Grounding Data (DDC) Horizontal Sync Vertical sync Clock (DDC) Troubleshooting For TV Ҹ sound. No picture or Make sure the TV is plugged in. Ҹ Make sure the power cord is connected to the consent correctly. Ҹ Check the power failure. Screen is black. Ҹ Make sure the external signal source mode is selected. Ҹ Press the INPUT button to change to TV. Picture is OK but there is no sound. Ҹ Press the Mute button. Ҹ Check another channel. Ҹ Press the Poor sound quality. button to increase the volume. Ҹ Make sure the channel using a stereo broadcast by pressing the Display( ) button. Select Mono. The sound quality of a stereo broadcast may be unstable in an area with a weak signal. (See page 22 ) Display No image on a specific channel. Ҹ Make sure the channel selection is correct. Ҹ Change the antenna direction to the right or left. Ҹ Adjust the fine tuning of the channel. Image is not stable and may appear to vibrate , horizontal bars appear. Ҹ Adjust the fine tuning of the channel. No color on a specific channel (a black & white image). Ҹ Check other channels to see if the specific channel is broadcasting a black & white program. Black or white dots appear on all channels l or a specific channel. Ҹ Make sure the antenna is connected correctly. (See page 10) Ҹ Make sure there is no powerful electromagnetic wave interference from the transmitting station. Ҹ Stop using a hair drier, electric drill or electric blender . Ҹ Adjust the color. (See page 19) Ҹ Make sure the status of the antenna or wire is good . Ҹ Adjust the fine tuning of the channel. 37 Troubleshooting For Monitor no signal message cable" message Ҹ Check if the signal cable(15Pin D-sub) is properly connected to the computer. (See page 32) Ҹ This message may appear when the resolution and frequency of the video card in the computer are out the range of the TV. Select the proper resolution and frequency for the TV. (See page 36) 38 Picture rolls down vertically. Ҹ Check if the signal cable (15Pin D-sub) is properly connected to the computer. (See page 32) A shadowed area appears on the screen. Ҹ Make sure the resolution and frequency of the computer video card are set properly to the range of the TV. Set the picture again referring to the standard display mode and current mode. (See page 36) The image is too large or too small. Ҹ Adjust the picture to use the screen position feature. (See page 34) Horizontal or vertical bars appear on the screen. Ҹ Adjust the frequency and fine tuning. Ҹ Adjust the resolution and frequency to the recommended specifications. (See page 36) (1024 x 768 @ 60Hz) The power indicator light blinks green. Ҹ The TV is in power saving mode. The picture will return to normal status when you press any key on the keyboard or move the mouse. SpecificationsH Model name HQL260WR Size LCD TV/VIDEO DTV Display Size 566.4mm (H)Ŧ339.84mm (V) Pixel Pitch 0.4425mm (H) x 0.4425mm (W) Pixel Number 1280ŦRGBŦ768 Type a-si TFT active maxrix Brightness 500 cd / m2 Contrast Ratio 500 : 1 Viewing Angle 170Ŋ(H) / 170Ŋ(V) Color System NTSC Sound System NTSC-M Video System CVBS, S-VHS, RGB Y / Pb / Pr COMPONENT : 480i/p, 576i, 720p, 1080i Sync. PC 26" Diagonal Horizontal 30~61KHz Vertical 56~75Hz Display Color Max. Resolution 16,770,000 Colors 1024Ŧ768 Sync.(H/V Separate) TTL, Positive or Negative Audio Output 5W(rms) x 2EA Power Supply AC 110-240V 50/60Hz Power Consumption typical 120W 1.8W Power Saving Dimension (WŦHŦD) 814mmŦ490mmŦ236mm (With stand) Weight 17.0Kg (With stand) Accessories Remote Control, Battery (AAA type), Operating Instructions Power Cord, DC Adapter Ҹ Design and specifications are subject to change without notice. 39
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Page Count : 21 Language : EN-US Has XFA : No XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : uuid:f33e852e-8f8f-4f8e-b12a-402569e4d41c Producer : Acrobat Distiller 6.0 (Windows) Company : 현대 원스탑 인증센터 Source Modified : D:20040316164106 Headline : Create Date : 2004:03:17 01:44:43+09:00 Creator Tool : Word용 Acrobat PDFMaker 6.0 Modify Date : 2004:03:17 01:54:05+09:00 Metadata Date : 2004:03:17 01:54:05+09:00 Document ID : uuid:8ee9a800-ebd5-4e14-8701-f13b5a610b3a Version ID : 3 Format : application/pdf Title : 1 Creator : 이 상 준 Subject : Tagged PDF : No Author : 이 상 준EXIF Metadata provided by EXIF.tools