Hyundai IBT PT42AH000 42” PDP Monitor User Manual 1

Download:
Mirror Download [FCC.gov]
Document ID	381555
Application ID	FjIrM5yBwrQWhk5c8SA/XA==
Document Description	Users mnanual 1
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	298.83kB (3735336 bits)
Date Submitted	2003-12-15 00:00:00
Date Available	2003-12-12 00:00:00
Creation Date	2003-12-03 11:21:15
Producing Software	Acrobat Distiller 5.0.5 (Windows)
Document Lastmod	2003-12-03 11:38:43
Document Title	1
Document Creator	Acrobat PDFMaker 5.0 for Word
Document Author:	이 상 준

FCC ID : PJIPT42AH000
ATTACHMENT E-1.
- USER’S MANUAL -
REPORT NO. : HCT-F03-1103
HYUNDAI C–TECH
Hyundai
Plasma Display
PT42AH000
User’s Guide
P/N 632 0236 102 Rev.02
w w w. h y u n d a i Q . c o m
GENERAL INFORMATION
U.S.FEDERAL COMMUNICATIONS COMMISSION RADIO FREQUENCY
INTERFERENCE STATEMENT INFORMATION TO THE USER
NOTE : This equipment has been tested and found to comply with the limits for a
Class B digital device pursuant to Part 15 of the FCC Rules.
WE
ImageQuest CO., LTD.
Ami-ri Bubal-Eub Ichon-Si Kyungki-Do
467-860 KOREA
declare under our sole responsibility that the product:
Kind of equipment : PDP TV
These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not
Type-Designation
: PT42AH000
installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
to which this declaration relates is in conformity with the
following standard(s) or other normative document(s)
Safety : IEC60065:1998 / EN60065:1998
EMC : EN 55022 : 1998+A1:2000, EN 55024 : 1998+A1:2001
EN 61000-3-2 : 2000 / EN 61000-3-3 : 1995+A1:2001
EN 55013:1990+A12:1994+A13:1996+A14:1999
EN55020:1994+A11:1996+A13:1999+A14:1999+A12:1999
following the provisions of the Low Voltage Directive 73/23/EEC,
93/68/EEC and the EMC Directive 89/336/EEC.
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet of a circuit different from that to which the
receiver is connected.
Accredited testlaboratory:
TÜV Rheinland
Am Grauen Stein
51105 Köln
• Consult the dealer or an experienced radio/TV technician for assistance.
Changes or modification not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
Connecting of peripherals requires the use of grounded shielded signal cables.
KOREA /November 26, 2003
Place and date of issue)
HONG KI, KIM
(Name and signature of
authorized person)
GENERAL INFORMATION
DECLARATION OF CONFORMITY
U.S.A.
GENERAL INFORMATION
HYUNDAI PL ASMA DISPL AY
General Information
Safety Precaution ............................................................. 5
Contents of the Package ................................................... 7
Separately Sold Products ................................................ 7
Parts Names and Functions ............................................ 9
Remote Control ............................................................... 11
Safety Precaution
Do not use or store flammable
spray or inflammables in a
place near a PDP.
Do not install a PDP in a
bookshelf, closet, or a place
where air is not well circulated.
The contents of this section are provided for the safety of users and their property.
Please read the contents before using.
- They may cause explosion or fire.
- Fire may be caused due to the rise of
internal temperature.
Bend an antenna line downward
on a point where the line pass
through from outdoor to indoor
so that rainwater may not
penetrate indoor.
GENERAL INFORMATION
GENERAL INFORMATION
HYUNDAI Plasma Display PT421/421H
- If raindrop gets into a PDP, fire or electric
shock may be caused.
Safety instructions are divided into “warning” and “alert”. Their meanings are as follows.
This pictorial sign is used when a caution is needed on a potentially dangerous items and operations.
Warning : When there is a possibility of serious injury or death upon violation of the displayed instruction.
Alert : When there is a possibility of slight injury or product damage upon violation of the displayed instruction.
Never separate, fix, or modify
at user’s discretion.
Warning
Firmly plus the power cord so
that it does not pull out.
Do not use damaged power
cord or plug, or loose outlet.
Never touch power plug with
wet hand.
- Unstable connection may cause fire.
- They may cause electric shock or fire.
- They may cause electrocution.
Do not put water bowl, vase,
candle, bug repellant smoke,
cigarette, small metal palette,
or heavy thing on a PDP.
Do not install in a place where
there are oil, smoke, or
humidity, or where water is
sprinkled or in a car.
Do not install on an unstable
place or small support.
- It may cause electric shock or fire and
also heavy things may cause injury
when it falls.
- They may cause electric shock or fire.
- If a child touch a PDP on such place
while playing, PDP may fall and injury
the child.
- When there is a need for fixing, call a
service center. Fire or electric shock
may be caused.
Do not put a metallic object like
chopstick, wire, or puncher or
inflammables like paper or a
match in a vent, headphone
jack, or AV jacks of PDP.
When a PDP produces
abnormal noise, burning smell,
or smoke, unplug the PDP
immediately and call a service
center.
- Electric shock or fire may be caused.
- Electric shock or fire may be caused.
Alert
Unplug when you do not use
your PDP for long time.
When moving a PDP, 2 or more
people are advised to carry it.
- If dust is stacked on a PDP, electric
shock or fire may be caused from heat,
fire, or deterioration of insulation.
- Injury or damage may be caused when a
PDP falls.
Consult a service center or
customer service for inside
cleaning about once a year.
- When dust is collected inside a PDP for
long time, fire or malfunction may be
caused.
HYUNDAI Plasma Display PT421/421H
GENERAL INFORMATION
GENERAL INFORMATION
Contents of the Package
To purchase additional parts, consult a distributor or selling agent.
TE
MU
WE
PO
IEW
EV
PR
ILL
ST
CT
PE
AS
RE
TU
PIC
UN
SO
UK
NE
AN
CH
MT
ME
LU
VO
AP
SW
Japan
SIZ
EP
SLE
CE
UR
SO
/OF
ON
PIP
NU
ME
TV/AV
TIO
CAP
TIO
TEC
PRO
INF
OW
H/L
HIG
AUT
PC.
HOL
Fixed wall mount frame
RE
STO
/FLO
LIST
EX
IND
/MI
TTX
SUB
PAG
EAL
REV
Adjustable wall mount frame
SIZE
User’s Guide
Power Cord
America/Canada
Europe
South Africa
Australia
Remote Control/2 Batteries
(1.5V AAA)
Speaker Cables
Antenna Cable
Korea
Separately Sold Products
Ceiling mount frame
If you want to purchase separately sold products, consult a service center, electronics shops,
or parts seller.
DVI PC video(digital) cable
Component(Y, Pb, Pr)
Cable
S-video cable
Desk type stand
Desk type speaker
Composite(Video & Audio)
Cable
PC signal Cable
Scart cable
Desk type speaker
stand
HYUNDAI Plasma Display PT421/421H
GENERAL INFORMATION
GENERAL INFORMATION
Parts Names and Functions
Rear View
Front View
terminal of a PC.
❻ D-SUB input terminal
Connect to the video output
terminal of a PC.
Connect to the Sub woofer
❼ Audio input terminal for
speaker
DVD
RS-232 input terminal
Connect to the audio output
Connect to the RS-232
terminal of DVD player.
terminal of a PC for the
❽ Component input
service check.
terminal for DVD or DTV
*For the control method
Connect to the Component
using this terminal, consult
output terminal of DVD
an authorized PDP monitor
player/DTV receiver.
dealer.
Audio input terminal for
❸ Phone Jack
DTV Component
Extend an RS-232 input.
Connect to the audio output
❹ DVI input terminal
terminal of DTV receiver.
DVI Terminal
Component input
terminal for DTV
Connect to the Component
PC/DVI Audio input
output terminal of DTV
terminal
receiver for Digital
Connect to the audio output
Sub woofer output
Remote sensor and power LED.
Point the remote control toward here.
It displays standby or operation status.
Channel buttons
Menu button
Use this button to display or exit from
menus.
Volume buttons
Source button (Page 11~15)
Use this button to switch among inputs
connected to PDP.
Power button:
Use this button to turn on or off a PDP
broadcast.
S-video input terminal
Use this for the better video
quality than video input
terminal.
Video Composite input
terminal for VCR
Connect to the Composite
Video output terminal of
VCR or DVD player.
Audio input terminal for
VCR
Connect this when S-video
or Composite Video inputs.
Video output
Audio output
SCART input terminal
For Composite Video inputs
and audio inputs used in
the European area.
SCART 2 input terminal
For Composite Video/Audio
or R,G,B inputs used in the
European area.
ANT. input
Power input terminal
Power cord is connected
here.
Speaker terminal
Stand assembly
Speaker assembly
Carrying handles
Screw hole for fixing on a
wall
10
Connecting VCR, Cable/Satellite Receiver
Connecting a DVD player
Connection Method
Connection Method
Connect Video/S-Video cable between Video/S-Video output terminal of VCR or Cable/Satellite
receiver and Video/S-Video input terminal of PDP.
(Connect cables and terminal in the same colors)
Connect video cables(Y, Pb, Pr) between output terminals(Y, Pb, Pr) of DVD player and the input
terminals(Y, Pb, Pr) of DVD(480i/480p/720p/1080i) on the rear of PDP.
(Connect cables and terminal in the same colors)
Connect Audio cable (left:white color, right:red color) between Audio output terminal of VCR or
cable/satellite receiver and Audio input terminal of PDP.
(Connect cables and terminal in the same colors)
Connect Audio cable between Audio output terminal of DVD player and Audio input terminal for DVD
Audio on the rear of PDP.
(Connect cables and terminal in the same colors)
CONNECTIONS
CONNECTIONS
HYUNDAI Plasma Display PT421/421H
DVD Player
VCR/Cable Receiver
POWER Cable
AUDIO Cable
AUDIO Cable
or
VIDEO Cable
How to Watch
VIDEO(Y, Pb, Pr) Cable
How to Watch
Use S-video cables for better picture quality.
17
18
HYUNDAI Plasma Display PT421/421H
Connecting DTV(Digital Broadcast) Receiver
Connection Method
Connection Method
Connect video cables(Y, Pb, Pr) between output terminals(Y, Pb, Pr) of DTV Receiver and the input
terminals(Y, Pb, Pr) of DTV(480p/720p/1080i) on the rear of PDP. (Connect cables and terminal in
the same colors)
Connect Video cable between Video output terminal of Camcoder/Game player and Video input
terminal of PDP.
(Connect cables and terminal in the same colors)
Connect Audio cable between Audio output terminal of DTV Receiver and Audio input terminal for
DTV Audio on the rear of PDP. (Connect cables and terminal in the same colors)
Connect Audio cable (left:white color, right:red color) between Audio output terminal of Camcoder
/Game player and Audio input terminal of PDP.
(Connect cables and terminal in the same colors)
Game Player
CONNECTIONS
CONNECTIONS
See The Camcoder
Camcorder
DTV Receiver
AUDIO Cable
AUDIO Cable
VIDEO(Y, Pb, Pr) Cable
How to Watch
How to Watch
19
20
HYUNDAI Plasma Display PT421/421H
Connecting to a PC(DVI, D-SUB)
Resolution
Connect PC signal cable(15 pins D-sub) between output terminal of PC and the D-sub input terminal
of a PDP. In case of DVI(Digital) cable, connect it between output terminal for DVI(DIGITAL) of PC
and input terminal for DVI of PDP.
Horizontal frequency
Vertical frequency
31.47
70.09
37.86
85.08
31.47
59.94
37.86
72.80
37.50
75.00
43.27
85.01
31.47
70.08
37.88
60.32
48.08
72.18
46.88
75.00
53.67
85.06
49.72
74.55
48.36
60.00
60.02
75.03
68.68
85.00
CONNECTIONS
CONNECTIONS
Connection Method
Resolutions Supported in PC
640 x 350
Connect Audio cable between Audio output terminal of PC and Audio input terminal for PC of PDP.
(Connect cables and terminal in the same colors)
640 x 480
720 x 400
800 x 600
AUDIO Cable
DVI Cable(DIGITAL)
or
When Using As a PC Monitor
21
D-SUB Cable(15pin)
832 x 624
1024 x 768
* Recommend Resolution is 1024x768@60Hz
22
HYUNDAI Plasma Display PT421/421H
Scart Connection to the External Input/Output
Scart Pin Specifications
If you wish to connect other equipment via the scart connectors on your TV, contact your dealer or a
qualified technician to wire the A/V cable as illustrated below.
Connection Method
PIN
CONNECTIONS
PIN
SIGNAL
If you have a second VCR and wish to copy casettes tape. Connect the source VCR to “F Scart” and
the target VCR to “H Scart” so that you can redirect the signal from “H Scart” to “F Scart”.
Audio Output R
12
Audio Iutput R
13
Audio Output L
14
Audio Iutput GND
15
RGB Red Input
Blue Iutput GND
16
RGB Blinkng Signal Input
Audio Iutput L
17
Video Output GND
RGB Blue Input
18
Video Iutput GND
Switching Voltage input
19
Video Output (CVBS)
Green Iutput GND
20
Video Iutput (CVBS)
21
Scrat Connetor GND
CONNECTIONS
SIGNAL
This end can be fitted with : A Scart connector
Red Iutput GND
VCR
SET TOP BOX
DVD
Video Game Device
F SCART
VIDEO(CVBS) + Audio(L/R)
TV OUT
TV IN
• F Scart input : RGB, CVBS
• H Scart input : CVBS
Video Disc Player
10
Satellite Receiver
11
RGB Green Iutput
• F Scart output : CVBS(TV Out)
• H Scart output : CVBS(Monitor Out)
How to Watch
23
24
HYUNDAI PL ASMA DISPL AY
Picture Setup
How to Select Picture Mode ........................................... 27
How to Set the User Picture ............................................ 28
How to Set Blue Screen ................................................. 29
How to Set Film Mode ................................................... 30
How to Select Color Temperature ................................... 31
How to Set PIP [Mode] .................................................... 32
How to Set Multi-Screen [Input Source/Position/Size] .... 33
Noise Reduct .................................................................. 36
HYUNDAI Plasma Display PT421/421H
How to Select Picture Mode
How to Set the User Picture
Users can adjust picture mode automatically accrding to the input mode(TV, Vedio, S-Video, F/H Scart,
DVD, DTV).
Users can manually adjust the picture in their own ways.
Press Menu button.
Menu items appear on the screen.
PICTURE
Press Up and Down buttons to move to
“PICTURE” icon.
Press Left and Right button to select
“MODE”.
MODE
PICTURE CUSTOM
BLUE SCREEN
S TA N D A R D
FILM MODE
COLOR TEMP
PIP
NOISE REDUCT
OFF
S TA N D A R D
SELECT
MOVE
Press Left and Right button, then the menu
changes in order below.
STANDARD
DYNAMIC
MOVIE
MILD
USER
EXIT
+ 000
MENU
S TA N D A R D
CUSTOM
BLUE SCREEN
FILM MODE
COLOR TEMP
PIP
NOISE
REDUCT
SELECT
MOVE
Press Menu button.
Menu items appear on the screen.
OFF
PICTURE
MODE
PICTURE
MENU
Press Up and Down buttons to move to
“PICTURE” icon.
Press Left and Right button to select
“PICTURE”
OFF
OFF
STANDARD : For general contents. It fits most video contents.
FILM MODE
COLOR TEMP
PIP
NOISE REDUCT
OFF
S TA N D A R D
SELECT
Press Up and Down button to move to
“PICTURE CUSTOME”.
Press Left and Right button to select
“PICTURE CUSTOME”.
Picture Custome menu appears.
Choose item, then Press Left and Right button
to adjust.
OFF
+ 000
MENU
MOVE
PICTURE
MODE
PICTURE
PIP
NOISE
+ 000
Press MENU button after the setting is done, and Menu goes to the previous menu.
If the EXIT button is pressed, the menu disappears.
S TA N D A R D
S TA N D A R D
CUSTOM
BLUE SCREEN
FILM MODE
COLOR TEMP
S TA N D A R D
MENU
PICTURE
MODE
PICTURE CUSTOM
BLUE SCREEN
PICTURE SETUP
PICTURE SETUP
MENU
OFF
OFF
S TA N D A R D
+ 000
REDUCT
SELECT
MENU
MOVE
PICTURE
CUSTOM
CONTRAST
BRIGHTNESS
SHARPNESS
COLOR
SELECT
MOVE
080
070
050
050
MENU
DYNAMIC : For a clear display.
MOVIE : For movies.
EXIT
MILD : For a soft display.
USER : When the user wants to set the values
see the next page
CONTRAST : Adjust the brightness and darkness of object and background.
PICTURE
How To Directly Select Picture Mode : Press
- Users can select STANDARD
DYNAMIC
S-Vedio, F/H Scart, DVD, DTV.
- Users can select STANDARD
DVI.
button.
MOVIE
LOW(Text Mode)
Press MENU button after the setting is done, and Menu goes to the previous menu.
If the EXIT button is pressed, the menu disappears.
MILD
BRIGHTNESS : Adjust the brightness of the entire picture.
USER, when the input mode is TV,
SHARPNESS : Adjust clarity of outline of objects.
COLOR : Adjust colors into deeper or lighter colors.
HIGH(Movie), when the input mode is PC or
TINT : Adjust colors naturally.
(The NTSC only mode it operates)
Setting of Color and Tint is not supported in PC, DVI and DTV input modes.
27
28
HYUNDAI Plasma Display PT421/421H
How to Set Blue Screen
How to Set Film Mode
Press Menu button.
Menu items appear on the screen.
Press Up and Down buttons to move to
“PICTURE” icon.
Press Left and Right button to select
“PICTURE”.
PICTURE
MODE
PICTURE CUSTOM
BLUE SCREEN
S TA N D A R D
FILM MODE
COLOR TEMP
PIP
NOISE REDUCT
OFF
S TA N D A R D
SELECT
MOVE
PIP
NOISE
Press Up and Down button to move to
“BLUE SCREEN”.
Press Left and Right button to “ON/OFF”.
EXIT
29
+ 000
MENU
S TA N D A R D
CUSTOM
BLUE SCREEN
FILM MODE
COLOR TEMP
SELECT
REDUCT
MOVE
Press Menu button.
Menu items appear on the screen.
OFF
PICTURE
MODE
PICTURE
MENU
Press Up and Down buttons to move to
“PICTURE” icon.
Press Left and Right button to select
“PICTURE”.
OFF
OFF
FILM MODE
COLOR TEMP
PIP
NOISE REDUCT
OFF
S TA N D A R D
SELECT
MOVE
Press Up and Down button to move to
“FILM MODE”.
Press Left and Right button to “ON/OFF”.
EXIT
OFF
+ 000
MENU
PICTURE
MODE
PICTURE
PIP
NOISE
+ 000
Press MENU button after the setting is done, and Menu goes to the previous menu.
If the EXIT button is pressed, the menu disappears.
S TA N D A R D
S TA N D A R D
CUSTOM
BLUE SCREEN
FILM MODE
COLOR TEMP
S TA N D A R D
MENU
PICTURE
MODE
PICTURE CUSTOM
BLUE SCREEN
PICTURE SETUP
PICTURE SETUP
MENU
.TQKSMZ࿖ၦ ຫමၡ ။વ໓ၕ ໓඗ዻ઎ གྷᅯዻཇ ઠဨ࿝ ໕ႜዻཊགྷ࿼
SELECT
REDUCT
MOVE
OFF
OFF
S TA N D A R D
+ 000
MENU
Press MENU button after the setting is done, and Menu goes to the previous menu.
If the EXIT button is pressed, the menu disappears.
30
HYUNDAI Plasma Display PT421/421H
How to Select Color Temperature
How to Set PIP [Mode]
Users can adjust Color as users want.
This is to set PIP(Picture In Picture) mode or Twin mode.
Press Menu button.
Menu items appear on the screen.
Press Up and Down buttons to move to
“PICTURE” icon.
Press Left and Right button to select
“PICTURE” icon.
PICTURE
MODE
PICTURE CUSTOM
BLUE SCREEN
S TA N D A R D
FILM MODE
COLOR TEMP
PIP
NOISE REDUCT
OFF
S TA N D A R D
SELECT
MOVE
PIP
NOISE
MENU
CUSTOM
REDUCT
Press Up and Down button to move to
“COLOR TEMP”.
Press Left and Right button, then Mode changes in order below.
STANDARD
COOL
WARM
SELECT
MOVE
PICTURE
+ 000
S TA N D A R D
BLUE SCREEN
FILM MODE
COLOR TEMP
Press Menu button.
Menu items appear on the screen.
OFF
PICTURE
MODE
PICTURE
MENU
Press Up and Down buttons to move to
“PICTURE” icon.
Press Left and Right button to select
“PICTURE” icon.
S TA N D A R D
FILM MODE
COLOR TEMP
PIP
NOISE REDUCT
OFF
S TA N D A R D
SELECT
S TA N D A R D
PIP
NOISE
+ 000
Press MENU button after the setting is done, and Menu goes to the previous menu.
If the EXIT button is pressed, the menu disappears.
STANDARD : Colors for general picture.
COOL : Cool colors with bluish tone.
WARM : Warm colors with reddish tone.
MENU
PICTURE
S TA N D A R D
CUSTOM
OFF
OFF
Press Left and Right button to select
“PIP”.
PIP Menu appears.
SELECT
+ 000
MENU
MOVE
PIP
OFF
TV
MODE
SOURCE
S WA P
LARGE
S WA P
SIZE
POSITION
RIGHT DOWN
037
Press Up and Down button to move to
“MODE”.
Press Left and Right button, then Mode changes in order below.
PIP
TWIN
OFF
5IQV
S TA N D A R D
REDUCT
CHANNEL
EXIT
+ 000
BLUE SCREEN
FILM MODE
COLOR TEMP
Press Up and Down button to move to
“PIP”.
OFF
MOVE
MODE
PICTURE
OFF
OFF
MENU
MODE
PICTURE CUSTOM
BLUE SCREEN
PICTURE SETUP
PICTURE SETUP
MENU
SELECT
5IQV
MOVE
MENU
;]J
;]J
PIP : To watch the Sub screen in a
main screen at once.
TWIN : To watch two screens in half
and half.
After setting this, go to step 7 to set the SOURCE.
31
32

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Modify Date                     : 2003:12:03 11:38:43+09:00
Create Date                     : 2003:12:03 11:21:15+09:00
Page Count                      : 15
Creation Date                   : 2003:12:03 11:21:15+09:00
Mod Date                        : 2003:12:03 11:38:43+09:00
Producer                        : Acrobat Distiller 5.0.5 (Windows)
Author                          : 이 상 준
Metadata Date                   : 2003:12:03 11:38:43+09:00
Creator                         : 이 상 준
Title                           : 1
Page Mode                       : UseNone
Tagged PDF                      : No
Has XFA                         : No

EXIF Metadata provided by EXIF.tools