ICOM orporated 348400 Dual Band Transceiver User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2227051
Application ID	dU04LPj+HBXvTm9UJHRE3w==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	123.9kB (1548801 bits)
Date Submitted	2014-03-27 00:00:00
Date Available	2014-07-30 00:00:00
Creation Date	2014-02-05 15:59:01
Producing Software	Adobe PDF Library 8.0
Document Lastmod	2014-03-25 11:45:42
Document Title	User Manual
Document Creator	Adobe InDesign CS3_J (5.0.4)

BASIC INSTRUCTIONS
DUAL BAND TRANSCEIVER
ID-5100A
ID-5100E
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
WARNING: MODIFICATION OF THIS DEVICE TO RECEIVE CELLULAR RADIOTELEPHONE SERVICE SIGNALS IS PROHIBITED
UNDER FCC RULES AND FEDERAL LAW.
FOREWORD
Thank you for purchasing this fine Icom product. The ID5100A and ID-5100E DUAL BAND TRANSCEIVER are designed
and build with Icom’s superior technology and craftsmanship
combining traditional analog technologies with the new digital
technology, Digital Smart Technologies for Amateur Radio (DSTAR), for a balanced package.
With proper care, this product should provide you with years
of trouble-free operation.
We thank you for making your ID-5100A or ID-5100E your
transceiver of choice, and hope you agree with Icom’s philosophy of “technology first.” Many hours or research and development went into the design of your ID-5100A or ID-5100E.
EXPLICIT DEFINITIONS
WORD
R DANGER!
R WARNING!
CAUTION
NOTE
DEFINITION
Personal death, serious injury or an explosion may occur.
Personal injury, fire hazard or electric
shock may occur.
Equipment damage may occur.
Recommended for optimum use. No risk
of personal injury, fire or electric shock.
IMPORTANT
READ ALL INSTRUCTIONS carefully and completely
Icom, Icom Inc. and the Icom logo are registered trademarks of Icom
Incorporated (Japan) in Japan, the United States, the United Kingdom, Germany, France, Spain, Russia and/or other countries.
Adobe and Adobe Reader are either registered trademarks or trademarks of Adobe Systems Incorporated, in the United States and/or
other countries.
Microsoft, Windows and Windows Vista are registered trademarks of
Microsoft Corporation in the United States and/or other countries.
The BluetoothÂŽ work mark and logos are registered trademarks
owned by Bluetooth SIG, Inc. and any use of such marks by Icom
inc. is under license.
All other products or brands are registered trademarks or trademarks
of their respective holders.
before using the transceiver.
SAVE THIS INSTRUCTION MANUAL— This instruction manual contains basic operating instructions for the
ID-5100A/ID-5100E.
SUPPLIED ACCESSORIES
The following accessories are supplied with the transceiver.
DC power
cable
Operating guide
Controller cable
(3.5 m:11.4 ft)
Microphone
(HM-207)
CD
(Instruction manual
[Full instructions])
(Includes the CS-5100
CLONING SOFTWARE)
Spare fuse
(FGB 20 A)
Microphone
hanger
IMPORTANT NOTES
D When using the GPS receiver
• GPS signals cannot pass through metal objects. When using the ID-5100A or ID-5100E inside a vehicle, you may not
receive GPS signals. We recommend you use it near a window. Please avoid the areas:
1. where it will block the driver’s view.
2. where the air bags could deploy.
3. where it becomes a driving obstacle.
• The Global Positioning System (GPS) is built and operated
by the U.S. Department of Defence. The Department is responsible for accuracy and maintenance of the system. Any
changes by the Department may affect the accuracy and
function of the GPS system.
• When the GPS receiver is activated, please do not cover
the remote controller with anything that will block the satellite signals.
• The GPS receiver may not work if used in the following locations:
1. Tunnels or high-rise buildings
2. Underground parking lots
3. Under a bridge or viaduct
4. In remote forested areas
5. Under bad weather conditions (rainy or cloudy day)
ii
ABOUT THE TOUCH SCREEN
D Touch screen precautions
D Touch operation
Briefly touching the controller’s touch operates the function.
• The touch screen may not properly work when LCD protection film or sheet is attached.
• Touching the screen with finger nails, sharp topped object
and so on, or touching the screen hard may damage the
screen.
• Tablet PC’s operations such as flick input, pinch in and pinch
out cannot be performed with this touch screen.
(Short touch): If the display is touched briefly, one short
beep sounds.
(Long touch): If the display is touched for 1 second, one
short and one long beep sound.
• After the beep, the operation is enabled.
D Touch screen maintenance
• If the touch screen becomes dusty or dirty, wipe it clean with
a soft, dry cloth.
• When you wipe the touch screen, be careful not to push it
too hard or scratch it with finger nails. Otherwise you may
damage the touch screen.
In the instruction manual, the touch operation is described
as shown below.
If the display is touched briefly, one short beep
sounds.
If the display is touched for 1 second, one short and
one long beep sound.
D About the Touch area
Areas you can touch for various operations are shown to the
right.
• This page describes the main operations of the touch screen.
See the instruction manual for other operations.
iii
ABOUT THE TOUCH SCREEN (Continued)
Dual or Single band display selection:
• MAIN band: Used for TX or radio’s settings
• SUB band: Used for the Dualwatch operation
“MHz” tuning selection:
Operating band selection:
Cancels “MHz” tuning:
Tuning step selection:
Operating mode
selection:
Sets MAIN band to the right side:
Dual or Single band display selection:
• In the Single band, touch [B] to set the B band as
the MAIN band.
Sets MAIN band to the
right side:
ID-5100
Function menu
operations
• The following operations
are examples.
Sets the Mode:
Displays the Memory
Write window:
Writes to a blank
CH:
Displays the Monitor
function:
TX power selection:
Scan type
selection:
Starts a scan:
• The last used scan
starts.
Function menu selection:
Displays the Function menu list:
Home CH selection:
Displays the DR screen:
• Selects the Home CH that you
set in the QUICK Menu.
• D-STAR settings can easily be Menu:
made.
Displays the Menu screen:
Home CH setting:
Displays the QUICK
iv
ABOUT THE SUPPLIED CD
The following instructions and installers are included on the
CD.
• Basic instructions
Basic operating instructions, and are the same instructions
that are in this manual
• Full Instructions
Full operating instructions, and more details are described
than in this manual
• Operating Guide
Operating guide for using the touch screen, Menu items and
Quick menu items. Contains the same information that is in
the supplied leaflet.
• HAM radio Terms
A glossary of HAM radio terms
• CS-5100 Instruction manual
Instructions for the CS-5100 cloning software installation
and use
• CS-5100 Installer
Installer for the CS-5100 cloning software
• Adobe® Reader® Installer
Installer for AdobeÂŽ ReaderÂŽ
A PC with the following Operating System is required.
• Microsoft® Windows® 8.1, Microsoft® Windows® 8, Microsoft® Windows® 7 , Microsoft® Windows Vista® or Microsoft®
WindowsÂŽ XP
D Starting the CD
q Insert the CD into the CD drive.
• Double click “Autorun.exe” on the CD.
• Depending on the PC setting, the Menu screen shown
below is automatically displayed.
w Click the desired button to open the file.
• To close the Menu screen, click [Quit].
Opens the Basic
Instructions (this manual)
Opens the Full
Instructions
Installs the
CS-5100
Opens the
Operating Guide
Opens the
CS-5100
Instructions
Opens the
Glossary
Installs the AdobeÂŽ ReaderÂŽ
Quits the menu screen
To read the guide or instructions, AdobeÂŽ ReaderÂŽ is required. If you
have not installed it, please install the AdobeÂŽ ReaderÂŽ on the CD or
downloaded it from Adobe Systems Incorporated’s website.
PRECAUTIONS
R DANGER HIGH VOLTAGE! NEVER touch an antenna connector during transmission. This may result in an
electrical shock or burn.
R WARNING! NEVER connect the transceiver to a
R WARNING RF EXPOSURE! This transceiver emits
Radio Frequency (RF) energy. Extreme caution should be observed when operating this transceiver. If you have any questions regarding RF exposure and safety standards please
refer to the Federal Communications Commission Office of
Engineering and Technology’s report on Evaluating Compliance with FCC Guidelines for Human Radio Frequency Electromagnetic Fields (OET Bulletin 65).
R WARNING! NEVER connect the transceiver to a
R WARNING! NEVER operate the transceiver while
driving a vehicle. Safe driving requires your full attention—
anything less may result in an accident.
R WARNING! NEVER operate the transceiver with an
earphone or other audio accessories at high volume levels.
Hearing experts advise against continuous high volume operation. If you experience a ringing in your ears, reduce the
volume level or discontinue use.
R WARNING! NEVER connect the transceiver to an AC
outlet. This may pose a fire hazard or result in an electric
shock.
power source of more than 16 V DC. This will damage the
transceiver.
power source using reverse polarity. This will damage the
transceiver.
R WARNING! NEVER cut the DC power cable between
the DC plug and fuse holder. If an incorrect connection is
made after cutting, the transceiver may be damaged.
R WARNING! NEVER let metal, wire or other objects
touch any internal part or connectors on the rear panel of the
transceiver. This may result in an electric shock or this could
cause a fire or damage the transceiver.
R WARNING! NEVER operate or touch the transceiver
with wet hands. This may result in an electric shock or may
damage the transceiver.
R WARNING! Immediately turn the transceiver power
OFF and remove the power cable if it emits an abnormal
odor, sound or smoke. Contact your Icom dealer or distributor
for advice.
CAUTION: NEVER expose the transceiver to rain, snow
or any liquids.
10
11
12
13
14
15
16
17
18
19
vi
PRECAUTIONS (Continued)
CAUTION: NEVER change the internal settings of the
transceiver. This may reduce transceiver performance and/or
damage to the transceiver.
CAUTION: NEVER place the transceiver where normal
During mobile operation, NEVER place the transceiver
where air bag deployment may be obstructed.
operation of the vehicle may be hindered or where it could
cause bodily injury.
During mobile operation, DO NOT place the transceiver
where hot or cold air blows directly onto it.
DO NOT operate the transceiver near unshielded electrical
During mobile operation, DO NOT operate the transceiver
without running the vehicle’s engine. When the transceiver’s
power is ON and your vehicle’s engine is OFF, the vehicle’s
battery will soon become exhausted.
blasting caps or in an explosive atmosphere.
DO NOT push the PTT when not actually desiring to transmit.
DO NOT use harsh solvents such as benzine or alcohol to
clean the transceiver, as they will damage the transceiver’s
surfaces. If the transceiver becomes dusty or dirty, wipe it
clean with a soft, dry cloth.
DO NOT use or place the transceiver in areas with temperatures below –10°C (+14°F) or above +60°C (+140°F). Be
aware that temperatures on a vehicle’s dashboard can exceed
+80°C (+176°F) in direct sunlight, resulting in permanent damage to the transceiver if left there for extended periods.
DO NOT place the transceiver in excessively dusty environments or in direct sunlight.
DO NOT place the transceiver against walls or putting anything
on top of the transceiver. This will obstruct heat dissipation.
vii
Place the transceiver in a secure place to avoid inadvertent
use by children.
Make sure the transceiver power is OFF before starting the
vehicle engine. This will avoid possible damage to the transceiver by ignition voltage spikes.
During maritime mobile operation, keep the transceiver and
microphone as far away as possible from the magnetic navigation compass to prevent erroneous indications.
BE CAREFUL! The rear panel will become hot when operating the transceiver continuously for long periods of time.
Use Icom microphones only (supplied or optional). Other
manufacturer’s microphones have different pin assignments,
and may damage the transceiver.
TABLE OF CONTENTS
FOREWORD ......................................................................... i
EXPLICIT DEFINITIONS ....................................................... i
IMPORTANT .......................................................................... i
SUPPLIED ACCESSORIES ................................................. ii
IMPORTANT NOTES ............................................................ ii
ABOUT THE TOUCH SCREEN ........................................... iii
ABOUT THE SUPPLIED CD ................................................ v
PRECAUTIONS ................................................................... vi
TABLE OF CONTENTS ......................................................viii
NEW FUNCTIONS ....................................... x–xii
1 PANEL DESCRIPTION ........................... 1–10
■
■
■
■
Controller — Front panel .............................................1
Controller — Display (Touch screen) ..........................2
Main unit — Front and rear panels .............................7
Microphone (HM-207) .................................................8
2 BASIC OPERATION .............................. 11–18
■
■
■
■
■
■
Power ON the power .................................................11
Setting audio volume and squelch level ....................11
Selecting a tuning step..............................................11
Selecting the watch mode .........................................12
Selecting the operating band ....................................13
Direct frequency input ...............................................14
■
■
■
■
■
■
Selecting the Mode and the DR function ..................15
Transmitting...............................................................16
Selecting the operating mode ...................................17
Lock function .............................................................17
Home channel function .............................................18
Speech function ........................................................18
3 MEMORY MANAGEMENT .................... 19–20
■ Writing a Memory channel ........................................19
■ Checking the programmed Memory contents ...........19
4 D-STAR OPERATION............................ 21–54
■
■
■
■
■
■
■
■
■
■
■
■
■
Unique features of D-STAR .......................................21
D-STAR Introduction .................................................22
About the DR (D-STAR Repeater) function...............22
Way to communicate with the DR function ...............23
Enter your call sign into the transceiver ....................24
Register your call sign at a gateway repeater ...........27
Making a Simplex call ...............................................29
Accessing repeaters .................................................31
Using the RX history .................................................33
Capturing a call sign .................................................35
Making a Local area call ...........................................37
Making a Gateway Repeater call ..............................39
Calling an individual station ......................................41
viii
TABLE OF CONTENTS
■ Troubleshooting.........................................................43
■ Reflector operation....................................................45
■ Updating the repeater list ..........................................51
■ Installing in a vehicle .................................................81
■ Antenna installation...................................................82
■ Battery connection ....................................................83
5 RECORDING A QSO ONTO
AN SD CARD ........................................ 55–58
9 MAINTENANCE .................................... 85–86
■
■
■
■
■
Resetting ...................................................................85
Power protect function ..............................................86
Spurious signals .......................................................86
Fuse replacement .....................................................86
About the SD card.....................................................55
Inserting the SD card ................................................56
Recording a QSO audio ............................................57
Playing back the recorded audio ...............................58
Removing the SD card ..............................................58
10 INFORMATION ............................................ 87
6 GPS OPERATION ................................. 59–60
COUNTRY CODE LIST .................................................87
FCC INFORMATION ......................................................87
■ GPS operation ..........................................................59
■ Checking your GPS position .....................................59
INDEX......................................................... 88–??
7 MENU SCREEN .................................... 61–78
■ Menu item selection ..................................................61
■ Menu items and Default settings ...............................62
■ Connect controller to main unit .................................79
8 INSTALLATION AND CONNECTIONS . 79–84
■ Microphone connection .............................................79
■ DC power supply connection ....................................79
■ Remote installation ...................................................80
ix
■
■
■
■
NEW FUNCTIONS
This section describes the new functions built into the ID5100A/E.
Add-on functions for D-PRS
Two band monitoring in the DV mode
The transceiver can simultaneously monitor two different frequencies in the DV mode. Or, while operating in the Simplex
mode on the MAIN band, you can monitor a D-STAR repeater
on the SUB band.
D-PRS enables the transceiver to transmit or receive the Object, Item or Weather data in addition to position data.
With the D-PRS add-on functions, you can receive information such as an event, traffic, emergency or weather while
making a voice call in the DV mode.
• See Section 8 of the Full Instructions for details.
D-PRS “TX FORMAT” screen in the Menu screen.
(GPS > GPS TX Mode > D-PRS > TX Format)
• See Section 2 of the Full Instructions for details.
MAIN band
(for TX and RX)
NEW FUNCTIONS
• See the Full Instructions for more details.
SUB band
(for RX)
Touch to set the
GPS TX format
to “D-PRS.”
NEW FUNCTIONS
Memory management
You can easily edit the Memory or Call channel contents in
the “MANAGE MEMORY” screen. You can view the contents
on a list. (p. ??)
“MANAGE MEMORY” item
Near FM Repeater search function
You can enter the FM repeater data using the DR function.
The function can find only FM repeaters in your transceiver's
repeater list.
• See Section 8 of the Full Instructions for details.
Memory edit screen
When the FM repeater is selected.
Import and Export the CSV format file
You can easily import and export the repeater list. (p. ??)
• An SD card is required.
xi
NEW FUNCTIONS
BluetoothÂŽ operation
Installing the optional UT-133 BluetoothÂŽ UNIT allows you to
use a variety of BluetoothÂŽ products.
• See Section 15 of the Full Instructions for details.
Android device
(third party)
BluetoothÂŽ
VS-3
NEW FUNCTIONS
Calling through a reflector
When you link to a reflector, you can listen to activity on all
the repeaters that are connected to the reflector, and easily
make contacts. (p. ??)
xii
1
PANEL DESCRIPTION
w VOLUME CONTROL [VOL]
Rotate to adjust the audio level. (p. ??-??)
■ Controller — Front panel
Display
ID-5100
About control’s operation
In the Dualwatch mode, the left side controls are used for
the left side band, and the right side controls are used for
the right side.
In the Single watch mode, the left side controls are used
for the A band, and the right side controls are used for the
B band.
q SQUELCH CONTROL [SQL]
Rotate to adjust the squelch level. (p. ??-??)
• Normally, set the squelch level to where noise and the “BUSY”
icon just disappear. (closed)
• You can use the S-Meter Squelch or Attenuator function by rotating the control clockwise beyond the center position. (p. ??-??)
e MAIN UNIT CONNECTOR
Connect the controller to the Main unit using the supplied
control cable. (p. ??-??)
r TUNING DIAL [DIAL]
➥ In the VFO mode, rotate to select the operating frequency, and in the Memory mode, rotate to select a
Memory channel. (pp. ??-??, ??-??)
➥ In the Menu screen or Quick Menu window, rotate to
select a desired option or value. (pp. ??-??, ??-??)
➥ While scanning, rotate to change the scanning direction. (p. ??-??)
t POWER KEY [PWR]
➥ Hold down for 1 second to turn power ON or OFF. (p.
??)
➥ Push to audibly announce the operating frequency,
mode or a selected call sign. (p. ??-??)
y [MENU] (Touch screen) (p. ??-??)
Touch to open the Menu screen.
u [HOME] (Touch screen) (p. ??-??)
Touch to select the Home channel.
i [DR] (Touch screen) (p. ??-??)
Touch to open the DR screen.
o [QUICK] (Touch screen) (p. ??-??)
Touch to open the Quick Menu window.
PANEL DESCRIPTION
■ Controller — Display (Touch screen)
Single watch mode (A band)
Dualwatch mode
Single watch mode (B band)
In the Single watch mode: A band
In the Single watch mode: B band
q MAIN/SUB BAND ICON (p. ?-?)
In the Dualwatch mode, this icon will be highlighted to indicate the MAIN band.
“
” is displayed on the SUB band.
w TONE/DIGITAL SQUELCH ICONS
Displayed when you set any tone or digital squelch function.
(Mode: FM/FM-N)
➥ “TONE” is displayed while the Repeater Tone Encoder
is ON.
➥ “TSQLS” is displayed while the Pocket Beep function with CTCSS is ON.
➥ “TSQL” is displayed while the Tone squelch function is ON.
➥ “DTCSS” is displayed while the Pocket Beep function with DTCS is ON.
➥ “DTCS” is displayed while the DTCS squelch function
is ON.
➥ “TSQL-R” is displayed while the Reverse Tone squelch
function is ON.
➥ “DTCS-R” is displayed while the reverse DTCS squelch
function is ON.
(Mode: DV)
➥ “DSQLS” is displayed while the Pocket Beep function with Digital Call Sign squelch function is ON.
➥ “DSQL” is displayed while the Digital Call Sign squelch
function is ON.
➥ “CSQLS” is displayed while the Pocket Beep function
with Digital Code squelch function is ON.
➥ “CSQL” is displayed while the Digital Code squelch
function is ON.
PANEL DESCRIPTION
1
PANEL DESCRIPTION
■ Controller — Display (Touch screen) (Continued)
Dualwatch mode
er t y u i
!2
@5
@4
!3
@3
@2
@1
Single watch mode (B band)
!4
@0
!9
!8
!7
!6 !5
e MODE ICONS
Displays the selected operating mode. (p. ??-??)
• In the DV mode, “
” is displayed when you set the GPS TX
Mode to “D-PRS” or “NMEA.” (p. ??-??)
r PRIORITY ICON
Displayed when priority scan is turned ON. (p. ??-??)
t Bluetooth ICON (p. ?-?)
Displayed when you make a BluetoothÂŽ connection between your transceiver that has the optional UT-133 BluetoothÂŽ UNIT installed and a BluetoothÂŽ device.
y VOX ICON (p. ?-?)
Displayed when you make a BluetoothÂŽ connection between your transceiver that has the optional UT-133 BluetoothÂŽ UNIT installed and the optional VS-3 BluetoothÂŽ
HEADSET, and the VOX function is ON.
Single watch mode (A band)
o !0 !1
u EMR/BK/Packet Loss/Auto Reply ICON
➥ “EMR” is displayed when you select the Enhanced
Monitor Request (EMR) mode. (p. ?-?)
➥ “BK” is displayed when you select the Break-in (BK)
mode. (p. ?-?)
➥ “L” is displayed when packet loss has occurred. (p. ?-?)
➥ “ ” is displayed when you select the Automatic Reply
function. (p. ?-?)
i CLOCK READOUT (p. ?-?)
Displays the current time.
o RECORD ICON (p. ?-?)
Displayed while recording.
•“
•“
” is displayed while the transceiver is recording.
” is displayed while the recording is paused.
PANEL DESCRIPTION
!1 GPS ICON
➥ Displays the status of the GPS receiver. (p. ?-?)
➥ “•))” blinks when the GPS alarm beeps. (p. ?-?)
!2 AUTO POWER OFF ICON (p. ??-??)
Displayed when the Auto power OFF function is ON.
!3 DR SCREEN (p. ??-??)
Displays the DR screen where the D-STAR settings are made.
!4 BUSY/MUTE ICON (p. ??-??)
➥ “BUSY” is displayed while a signal is being received or
the squelch is open.
➥ “BUSY” blinks while the monitor function is activated.
➥ “MUTE” is displayed while the mute is activated.
!5 SKIP ICON (p. ??-??)
Displays the selected Skip function.
• “SKIP”: Memory skip
• “PSKIP”: Program skip
!6 MEMORY CHANNEL NUMBER
➥ Displays the selected Memory channel number, Memory Bank, and so on. (p. ??-??)
➥ “WX” is displayed when the Weather channel mode is
ON.* (p. ??-??)
*Only the USA version transceiver.
!7 MEMORY ICON (p. ??-??)
Displayed when the Memory mode is selected.
!8 S/RF METER (p. ??-??)
➥ Displays the relative signal strength of the receive signal.
➥ Displays the output power level of the transmit signal.
!9 FUNCTION MENU DISPLAY (p. ??-??)
Displays the touch key, according to the selected function
menu group.
@0 FUNCTION GROUP ICON
Displays the selected function group (F-1 to F-4, D-1 to
D-3) (p. ??-??)
@1 POWER ICONS
➥ Displays the output power level of the transmit signal in
three levels. (p. ??-??)
➥ In the Dualwatch mode:
“H” is displayed when you select high power.
“M” is displayed when you select mid power
“L” is displayed when you select low power.
PANEL DESCRIPTION
!0 SD ICON
➥ “ ” is displayed when a SD card is inserted.
➥ “ ” and “ ” alternately blinks while accessing the SD
card.
@2 S-METER SQUELCH/ATTENUATOR ICONS (p. ??-??)
➥ “S SQL” is displayed when the S-meter squelch is activated.
➥ “ATT” appears when the Attenuator function is activated.
@3 MEMORY NAME DISPLAY (p. ??-??)
In the Memory mode, displays the programmed memory
name.
@4 FREQUENCY READOUT
Displays the operating frequency. (p. ??-??)
@5 DUPLEX ICON (p. ??-??)
“DUP–” is displayed when minus duplex is selected, and
“DUP+” is displayed when plus duplex is selected.
1
PANEL DESCRIPTION
■ Controller — Display (Touch screen) (Continued)
D Function menu
You can toggle the function group to select the desired function keys to operate the transceiver, depending on the transceiver’s operating mode or status.
Each function key works for the MAIN band.
• In the VFO, Memory or Call channel mode, you can select
the F-1 to F-4 menus.
• In the DR screen, you can select the D-1 to D-3 menus.
➥ Touch the group icon to toggle the function group.
➥ Touch the group icon for 1 second to display the function
menu list.
q [V/M]
Touch to toggle between the VFO and Memory modes.
w [CALL]
Touch to turn the Call channel mode ON or OFF.
e [MW]
➥ Touch to open the Memory Write window.
➥ In the VFO mode or the DR screen, touch for 1 second
to store the operating data into the blank channel.
➥ In the Memory or Call channel mode, touch for 1 second to open the Memory Edit screen.
r [SCAN]
➥ Touch to open the Scan type setting window.
➥ Touch for 1 second to start the last used scan.
t [MONI]
Touch to turn the Monitor function ON or OFF.
!0
y [SKIP]
(Appears in the Memory mode.)
Touch to open the Scan Skip setting window.
u [DTMF]
Touch to open the DTMF send window.
i [VOICE]
(Displayed only when you insert an SD card into the transceiver’s SD card slot.)
Touch to open the “VOICE TX” screen.
o [LOW]
Touch to open the TX power setting window.
!0 [GPS]
Touch to open the GPS item setting window.
PANEL DESCRIPTION
!2
!3
!4
!5
!1 [DUP]
Touch to open the duplex direction setting window.
!8 [CS]
Touch to open the “CALL SIGN” screen.
!6
!7
!8
!9
@0
!2 [TONE]
(Displayed only when in the FM/FM-N mode.)
Touch to open a Tone function setting window.
!9 [SCAN]
➥ Touch to open the DR scan setting window.
➥ Touch for 1 second to start the last used scan.
!3 [REC]
(Displayed only when you insert an SD card into the transceiver’s SD card slot.)
Touch to start recording a QSO (communication) audio.
@0 [MONI]
Touch to turn the Digital Monitor function ON or OFF.
!4 [SCOPE]
Touch to open the sweep item setting window.
!5 [≈]
(Displayed only when you select “Continuous Sweep” in
[SCOPE](!4).)
Touch to start or stop a continuous sweeping.
!6
!7
!8
(Displayed only when in the DV mode.)
!6 [RX>CS]
➥ Touch to open the “RX>CS” screen.
➥ Touch for 1 second to set the received station call sign
as the destination (UR) call sign.
@1
!0
@1 [SKIP]
➥ Touch to open the skip setting window for the Access
repeater scan.
➥ Touch for 1 second to set the skip setting in the Function menu.
@2
PANEL DESCRIPTION
!1
!3
@2 [DSQL]
(Appears in the DV mode.)
Touch to open the Digital squelch function setting window.
If you set the operating mode to “DV” in the VFO mode,
[DSQL] is displayed instead of [TONE] on the F-3 menu.
!7 [CD]
Touch to open the “RX HISTORY” screen.
1
PANEL DESCRIPTION
■ Main unit — Front and rear panels
q SD CARD SLOT [SD CARD]
Insert an SD card (purchase separately). (p. ??-??)
w CONTROLLER CONNECTOR [CONTROLLER]
Connects to the Controller using the supplied control cable.
e MICROPHONE CONNECTOR [MIC]
Plug in the supplied microphone (HM-207) or the optional
microphone (HM-154).
r ANTENNA CONNECTOR
Connect a 50 ø impedance of antenna with a PL-259 connector.
The transceiver has a built-in duplexer, so you can use a
144 and 430 MHz dual-band antenna without needing an
external duplexer.
t COOLING FAN
The cooling fan for heat dissipation.
You can select the Fan control option in the Menu screen,
and automatically starts to rotate when you begin transmitting, or continuously rotates from power ON.
y u i
y DATA JACK [DATA]
Connect a PC through the optional OPC-2218LU DATA
COMMUNICATION CABLE, for cloning or low-speed data communication in the DV mode. (p. ??-??)
u EXTERNAL SPEAKER JACK 1 [SP1]
i EXTERNAL SPEAKER JACK 2 [SP2]
Connect to an 8 ohm external speaker.
• When you connect external speakers to [SP1] and [SP2],
the A band (left side display) audio is heard from [SP1]
and the B band (right side display) audio is heard from
[SP2].
• When you connect an external speaker to [SP1], the A
and B band audio is heard from [SP1]. In this case, the
internal speaker is disabled.
• When you connect an external speaker to [SP2], the
A band (left side display) audio is heard from the internal speaker and the B band (right side display) audio is
heard from the external speaker.
PANEL DESCRIPTION
D Microphone connector information
■ Microphone (HM-207)
With the HM-207, you can input numbers for frequency or
Memory channel setting, and easily adjust the audio volume
or squelch level.
87654321
Front panel view
PIN
No.
NAME
8V
DESCRIPTION
+8 V DC output.
MIC U/D Frequency Up/Down
HM-207 connection
M8V SW Grounds when the
HM-207 is connected.
PTT
MIC E
MIC
GND
PTT input
Microphone ground
Microphone input
PTT ground
When the HM-207 is
DATA IN connected, inputs HM207 data
SPECIFICATIONS
Maximum 10 mA
UP: Ground
DN: Ground
through 470 ˘
—
Ground for transmission
—
—
—
Mic element
!7
!6
!0
!1
!2
!3
!4
PANEL DESCRIPTION
o DC POWER SOCKET [DC 13.8V] (p. ??-??)
Connect 13.8 V DC power source through the supplied DC
power cable.
!5
q LED 1
Lights red while transmitting with [PTT].
w [∫]/[√] (UP/DOWN) KEYS
➥ Push to change the operating frequency or Memory
channel.
➥ Hold down to continuously change the frequency or
Memory channel.
—
1
PANEL DESCRIPTION
■ Microphone (HM-207) (Continued)
Mic element
!7
!6
!0
!1
!2
!3
!4
!5
e [PTT] SWITCH
Hold down to transmit, release to receive.
] KEY
r [VFO/MR•
➥ Push to toggle between the VFO and Memory modes.
(p. ?-?)
➥ Hold down for 1 second to turn the Lock function ON
or OFF. (p. ?-?)
t [HOME/CALL] KEY
➥ Push to select the Home channel.
➥ Hold down for 1 second to turn the Call channel mode
ON or OFF.
y [MAIN/DUAL] KEY
➥ In the Single watch mode, push to toggle between the
A and B bands.
➥ In the Dualwatch mode, push to toggle between the
MAIN and SUB bands.
➥ Hold down for 1 second to toggle between the Dualwatch and Single watch modes.
u [F-1] KEY
Push to activate the preprogrammed function of the [F-1]
key.
(Default: During RX/Standby: [BAND/BANK]
During TX: [T-CALL])
[F-2] KEY
Push to activate the preprogrammed function of the [F-2]
key.
(Default: During RX/Standby: [Monitor]
During TX: [---])
You can assign a desired function in the Menu screen.
i [CLR] KEY
In the Menu screen or Quick Menu window, push to return
to the standby screen.
p [ENT] KEY
➥ In the VFO mode, push to open the frequency entry
window.
➥ In the Memory mode, push to open the memory channel number input window.
➥ After the numeral input, push to set.
PANEL DESCRIPTION
!1 [VOL∍/A] KEY
➥ Push to increase the audio output level.
➥ When entering a DTMF code, push to input ‘A.’
!2 [VOL√/B] KEY
➥ Push to decrease the audio output level.
➥ When entering a DTMF code, push to input ‘B.’
!3 [SQL∍/C] KEY
➥ Push to increase the squelch level.
➥ When entering a DTMF code, push to input ‘C.’
!4 [SQL√/D] KEY
➥ Push to decrease the squelch level.
➥ When entering a DTMF code, push to input ‘D.’
!5 [#/CE] KEY
➥ In the frequency entry screen, push to delete a number.
➥ When entering a DTMF code, push to input ‘#.’
D Setting frequency and Memory channel
[Example for frequency setting]
First, push [VFO/MR•
] to select the VFO mode.
To enter the 435.680 MHz frequency:
➥ Push [4], [3], [5], [6], [8], [0], then [ENT].
To change the 439.680 MHz to 439.540 MHz:
➥ Push [•], [5], [4], [0], then [ENT].
To enter the 433.000 MHz frequency:
➥ Push [4], [3], [3], then [ENT].
[Example for Memory channel setting]
First, push [VFO/MR•
] to select the Memory mode.
PANEL DESCRIPTION
!0 LED 2
Lights green when transceiver’s power is ON.
To select the Memory channel ‘5’:
➥ Push [5] then [ENT].
!6 [M/.] KEY
➥ In the frequency entry screen, push to input a ‘.’ (decimal point).
➥ When entering a DTMF code, push to input ‘M.’
!7 [0] to [9] KEYS
In the frequency entry window or while entering a DTMF
code, push to input ‘0’ through ‘9.’
10
2
BASIC OPERATION
■ Power ON the power
■ Selecting a tuning step
➥ Hold down [ ] for 1 second to turn ON the power.
Rotating [DIAL] changes the frequency in the selected tuning
steps.
The VFO scan uses this step to search for a signal.
• A beep sounds and, after “ICOM ID-5100” and power source
voltage are displayed, the operating frequency appears.
• Hold down [ ] for 1 second to turn OFF the power.
Tuning steps (kHz)
[ ]
20
6.25
25
8.33*
30
10
50
12.5
Auto*
15
*Appears only when the AIR band is selected.
■ Setting audio volume and
squelch level
D Tuning step selection
q Touch the kHz digits for 1 second.
• Opens the Tuning step setting window.
q Rotate [VOL] to adjust the audio level.
w Rotate [SQL] until the noise and the “BUSY” icon just disappear.
• Rotating [SQL] counterclockwise makes the squelch tight. The
tight squelch is for strong signals.
• When rotating [SQL] clockwise beyond the center position,
[SQL] can be used as ‘S-meter Squelch’ or ‘Attenuator.’ Select
the [SQL] option in the Menu screen. (p. ??-??)
11
[VOL]
[VOL]
[SQL]
[SQL]
w Touch the desired tuning step.
• Sets the tuning step, and then returns to the previous screen.
• You can set the tuning step for both the VFO and Memory
mode.
• You can set the tuning step for each band.
• In the Tuning step setting window, rotating [DIAL] also selects
the tuning step.
BASIC OPERATION
■ Selecting the watch mode
Dualwatch mode
The transceiver has two independent watch modes: Dualwatch mode and Single watch mode.
Single watch mode
The Single watch mode uses the A and B bands, instead of
the MAIN and SUB bands, and you can monitor one of them
at a time.
In the Single watch mode, only one of the A or B bands is
displayed.
Touching [A] or [B] for 1 second selects the Dualwatch
mode.
In Single watch
mode: A band
In Single watch
mode: B band
Single watch mode
A band
D Selecting the MAIN or SUB band
➥ Touch [SUB] to toggle the displayed band between the
MAIN band and the SUB band.
BASIC OPERATION
Dualwatch mode
The Dualwatch mode uses the MAIN and SUB bands, and
you can simultaneously monitor both bands.
In the Dualwatch mode, both MAIN and SUB bands are displayed side by side.
Touching [MAIN] or [SUB] for 1 second selects the Single
watch mode.
• [MAIN] will be highlighted to indicate the MAIN band.
MAIN band
SUB band
SUB band
MAIN band
NOTE: The Dualwatch left side band becomes the A band
in the Single watch mode.
The Dualwatch right side band becomes the B band in the
Single watch mode.
12
2
BASIC OPERATION
■ Selecting the operating band
The transceiver can receive the AIR, 144 MHz or 430 MHz
bands.
The frequency range on each operating band is shown to the
right.
You can transmit on only the 144 MHz and 430 MHz bands.
Operating band
AIR
144 MHz
430 MHz
Frequency range
108.000 MHz to 137.000 MHz
137.000 MHz to 174.000 MHz
380.000 MHz to 479.000 MHz
D Operating band setting
q Touch the Memory channel number.
• Opens the Mode setting window.
w Touch [VFO].
• Selects the VFO mode.
13
e Touch the MHz digits.
• Opens the operating band setting window.
r Touch the desired operating band.
• The operating band setting window disappears.
• Touch [F-INP] to open the frequency entry window. You
can directly enter a frequency.
BASIC OPERATION
■ Direct frequency input
q Touch the Memory channel number.
• Opens the Mode setting window.
w Touch [VFO].
• Selects the VFO mode.
e Touch the MHz digits.
• Opens the operating band setting window.
t Touch the numbers to enter the desired frequency.
• The first entered digit is displayed to the left. Then the next
entered digit is displayed to the right of the previously entered
digit.
• If desired, touch “CE” to delete the entry.
y Touch [ENT] to set the frequency.
• Closes the frequency entry window.
• If you touch [ENT] without entering a digit below 100 kHz,
all unentered digits are set to “0.”
BASIC OPERATION
You can directly enter a frequency in the frequency entry window.
r Touch [F-INP].
• Opens the frequency entry window.
The entered frequency is displayed.
14
2
BASIC OPERATION
■ Selecting the Mode and the DR function
D VFO/Memory/Call channel/Weather channel* mode
VFO mode
The VFO mode is used to set the operating frequency.
Memory mode
The Memory mode is used to operate on Memory channels.
Call channel mode
The Call channel mode is used to operate on the most-often
used frequencies.
e Rotate [DIAL] to select the operating frequency or a channel.
•“
” and the selected Memory channel number are displayed.
• A selected Call channel number (“144 C0,” “144 C1,” “430 C0” or
“430 C1”) is displayed.
• The selected weather channel number (“WX-01” to “WX-10”) is
displayed.
VFO mode
Weather channel mode*
The Weather channel mode is used to monitor weather channels from the NOAA (National Oceanographic and Atmospheric Administration) broadcasts.
*Selectable in only the U.S.A. version transceivers.
Memory
mode
q Touch the Memory channel number.
• Opens the Mode setting window.
Call channel
mode
w Select the desired Mode.
15
Weather channel
mode*
BASIC OPERATION
■ Transmitting
The DR (D-STAR Repeater) function is for D-STAR repeater
operation. In this mode, you can easily select the preprogrammed repeaters and UR call signs by rotating [DIAL].
See page ??-?? for the DR function details.
q Touch [DR].
D Transmitting on an Amateur band
Before transmitting, monitor the operating frequency
to make sure transmitting won’t cause interference to
other stations on the same frequency.
CAUTION: Transmitting without an antenna may damage
the transceiver.
• Displays the DR screen.
You can transmit on only the 144 MHz and 430 MHz
bands.
q Set the operating frequency. (p. ?-?)
w Touch the Power icon.
BASIC OPERATION
D DR (D-STAR Repeater) function selection
• Opens the output power level setting window.
[DR]
w Rotate [DIAL] to select a desired access repeater.
DR screen
e Touch the transmit output power level.
• Select a level to suit your operating requirements.
• In the Dualwatch mode, “H” indicates high power, “M” indicates mid power and “L” indicates low power.
r Hold down [PTT] to transmit, and speak at your normal
voice level.
• The transmit LED lights red while transmitting.
• The S/RF meter displays the output power level.
t Release [PTT] to receive.
e Touch [DR].
• Closes the DR screen.
16
2
BASIC OPERATION
■ Selecting the operating mode
■ Lock function
Operating modes are determined by the modulation of the
radio signals. The transceiver has a total of five operating
modes, AM, AM-N, FM, FM-N and DV.
The FM mode is set as a default.
You can use the Lock function to prevent accidental frequency changes and unnecessary function access.
q Touch [QUICK].
q Touch the Mode icon.
• Opens the operating mode setting window.
[QUICK]
w Touch “<>”.
w Touch a desired operating mode.
• You can select the AM or AM-N mode for only the AIR band
(108.000 MHz to 136.995 MHz).
• You can select the FM, FM-N or DV mode for only the 144 and
430 MHz bands.
• While in the FM-N mode, the TX modulation is automatically set
to narrow (approximately Âą2.5 kHz)
• While in the DV mode, [GPS] appears in the operating mode
setting window, and you can select the GPS TX mode. When the
GPS TX mode is set, “
” is displayed. (p. 8-??)
• If the item is not displayed, touch [∫] or [√] one or more times to
select another page.
• When the Lock function is turned ON and the locked key is
pushed, the touch screen is touched, or [DIAL] is rotated, the
“LOCK” dialog box appears.
• To turn OFF the Lock function, touch [OFF] in the “LOCK” dialog
box.
• You can still use [ ], [PTT], [SQL] and [VOL] while the Lock function is ON.
Quick Menu window
17
2
■ Home channel function
■ Speech function
Home channels are often-used frequencies you can preset in
the transceiver’s VFO mode, Memory mode and DR function.
Select the Home channel function by just touching [HOME]
in each mode.
When you push [ ](SPEECH), the Speech function audibly
announces the displayed frequency and operating mode in
the VFO, Memory or Call channel modes, or the call sign of
the DR function.
Also, you can use other speech functions, such as the [DIAL]
speech function and Mode speech function. (pp. ??-??, ????)
D Home channel setting
q Select the desired mode or the DR screen to set the Home
channel.
w Select a frequency to be set as the Home channel.
• While in the DR screen, select “FROM.”
e Touch [HOME] for 1 second.
r Touch the displayed item to set the Home channel.
• While in the VFO mode, touch “Set Frequency,” while in the
Memory mode, touch “Set Channel.” or while in the DR screen,
touch “Set Repeater.”
NOTE: When you push [ ](SPEECH) while recording the
received audio in the DV mode, the received audio will be
muted, and no audio is recorded onto the SD card.
In modes other than the DV mode, the received audio will
be recorded.
You set the detail settings of the Speech function in the
“SPEECH” item of the Menu screen. (p. ?? to ??)
BASIC OPERATION
BASIC OPERATION
Example: When pushing [ ](SPEECH).
[ ](SPEECH)
YIU
JP1
18
3
MEMORY MANAGEMENT
■ Writing a Memory channel
The Memory mode is useful to quickly select often-used repeaters.
In this section, the basic channel programming is described.
See the Full Instructions for details.
Example: Writing 146.030 MHz/FM mode into a blank channel.
q Touch the Function group icon one or more times.
• Selects the F-1 menu.
w Touch [MW] for 1 second.
• The memory contents are briefly displayed, and then the operating data are saved into a blank channel.
■ Checking the programmed
Memory contents
The programmed Memory channels can be checked on the
“MEMORY LIST” screen.
Example: Checking the contents of the Memory channel ‘5.’
q Touch [MENU].
w Touch “Memory CH.”
(Manage Memory > Memory CH)
• If the item is not displayed, touch [∫] or [√] one or more times to
select the page.
Stored data
e Touch “ALL.”
• Displays the “MEMORY CH ALL” screen.
19
MEMORY OPERATION
r Touch [∫] or [√].
• Displays Channel 5.
t Touch “005.”
• Displays the programmed data in Channel 5.
• Touch [∫] or [√] one or more times to select the page.
MEMORY OPERATION
y Touch [MENU].
• Closes the “MEMORY CH ALL” screen.
20
4
D-STAR OPERATION
■ Unique features of D-STAR
● Easy Cross band operation
1200 MHz
430 MHz
You can communicate with
a 1200 MHz D-STAR station
using the ID-5100!
● Easy call sign entry with the Repeater list or TX/RX History
Easy Destination
(To) setting!
● Call Sign Capture key [RX>CS]
makes call sign capture easy.
21
This key makes call
sign capture easy!
D-STAR OPERATION
Before starting D-STAR, the following steps are needed.
STEP 1 Entering your call sign (MY) into the transceiver.
IMPORTANT!
gateway repeater.
STEP 2 Registering your call sign (MY) to a
STEP 3 Entering your D-STAR equipment into your registration form.
You have
completed the steps!!
See page 6-?? for details.
■ D-STAR Introduction
• You can transmit and receive digital voice, including
low-speed data, at the same time. You can transmit
and receive position data from the built-in GPS receiver.
■ About the DR (D-STAR Repeater) function
You can easily use the D-STAR repeaters with the DR (DSTAR Repeater) function. With this function, you can select
the preprogrammed repeater or frequency in “FROM” (the access repeater or simplex), and UR call sign in “TO” (destination), as shown to the right.
NOTE: If the repeater set in “FROM” (Access Repeater)
has no Gateway call sign, you cannot make a gateway
call.
D-STAR OPERATION
• In the original D-STAR (Digital Smart Technologies for
Amateur Radio) plan, JARL envisioned a system of
repeaters grouped together into Zones.
• The D-STAR repeater enables you to call a HAM station near you, or around the world.
Destination
(Repeater/Station)
Access repeater
or Simplex
In the DR screen
22
4
D-STAR OPERATION
■ Way to communicate with the DR function
With the DR function, the transceiver has three ways to communicate, as shown below.
Local area call
Access repeater
Simplex call
Hamacho
repeater
Hamacho area
To call another station not using a repeater.
To call through your local area (access) repeater.
Gateway call
Hirano
repeater
INTERNET
Sapporo
repeater
INTERNET
Hirano area
Sapporo area
To call through your local area (access) repeater, repeater gateway and
the internet to your destination repeater or individual station’s last used
repeater, using call sign routing.
23
NOTE:
• Using the repeater list is required to use the DR
function. (pp. ??-?? to ??-??)
• Before operating in the duplex mode, be sure to
check whether the repeater is busy, or not. If the
repeater is busy, wait until it is clear, or ask for a
“break” using a method acceptable to your local
procedures.
• The transceiver has a Time-Out Timer function
for DV operation. The timer limits a continuous
transmission. Warning beeps will sound approximately 30 seconds before time-out and then
again immediately before time-out.
D-STAR OPERATION
■ Enter your call sign into the transceiver
1. Displays the MY Call Sign edit screen
q Touch [MENU].
w Touch [My Call Sign].
(My Station > My Call Sign)
• If the item is not displayed, touch [∫] or [√] one or more times to
select the page.
e Touch the MY call sign memory channel “1” ([MY1]) for 1
second.
r Touch “Edit.”
2. Enter the call sign
t Touch the desired keypad to select the first digit.
(Example: J).
• A to Z, 0 to 9, / and (Space) are selectable.
• Touch “ab⇔12” to toggle between the Alphabet input and Number input modes.
• Touch [CLR] to delete the selected character, symbol or number.
• Touch “SPACE” to input a space.
y Touch [] to move the cursor backwards, or touch [] to
move the cursor forwards.
u Repeat steps t and y to enter your call sign of up to 8
characters, including spaces.
(Example: First J, then A, then 3, then Y, then U, then A)
D-STAR OPERATION
You can enter up to six MY call signs, in [MY1] through [MY6].
Example: Enter “JA3YUA” as your own call sign into the MY
call sign memory [MY1].
To enter ‘3.’
• Opens the “MY CALL SIGN (MYM)” edit screen.
The channel number selected in step e is displayed on ‘M.’
• A cursor appears and blinks.
NOTE: Your call sign must match the call sign you registered. (p. ??-??)
24
4
D-STAR OPERATION
■ Enter your call sign into the transceiver (Continued)
3. Save the call sign
Keys used for entry
Moves the cursor
i Touch [ENT].
• Saves the entered call sign and returns to the “MY CALL
SIGN” screen.
• See “Convenient” below if you want to enter a note.
Deletes
Sets
Cancels
Toggles the entry mode
o Touch the entered call sign.
• Sets the call sign to be used as MY call sign.
!0 Touch [MENU].
25
• Closes the “MY CALL SIGN” screen.
Enters a space
D-STAR OPERATION
✓ Convenient!
If desired, enter a note of up to 4 characters, such as the
model of the transceiver, name, area name, and so on, after
your call sign.
q Touch [] one or more times until the cursor moves to the
right of the “/”.
w Repeat steps t and y on the page ??-?? to enter a 4
character note.
(Example: 5100)
D-STAR OPERATION
26
4
D-STAR OPERATION
■ Register your call sign at a gateway repeater
To use the Internet, you must register your call sign with a
repeater that has a gateway, usually one near your home location.
About the registration process described:
This section describes the call sign registration process at
a repeater that is connected to the US Trust server.
There are other systems as well, and they have their own
registration process. For information on how to register on
one of them, contact the administrator of a repeater that
uses the alternate system.
1. Access the call sign registration screen
q Access the following URL to find the gateway repeater
closest to you.
http://www.dstarusers.org/repeaters.php
w Click the call sign of the repeater that you want to register
to.
e Click the “Gateway Registration URL:” link address.
r The “D-STAR Gateway System” screen appears.
Click [Register] to start the New User registration.
If needed, ask the gateway repeater administrator for
call sign registration instructions.
Click
27
D-STAR OPERATION
2. Register your call sign
4. Register your D-Star equipment
t Follow the registration instructions found there.
y When you receive a notification from the administrator,
your call sign registration has been approved.
i Register your D-STAR equipment information.
Ask the gateway repeater administrator for details.
o When your registration is complete, log out of your personal account, and start using the D-STAR network.
3. Register your personal information
Click
NOTE: You must register your D-STAR equipment BEFORE you can make calls through the gateway.
D-STAR OPERATION
u After your registration is approved, log in your personal account with your registered call sign and password.
28
4
D-STAR OPERATION
■ Making a Simplex call
You can make a transceiver to transceiver call (through no
repeater) in the DR screen.
r Touch “Repeater List.”
• Opens the “REPEATER GROUP” screen.
NOTE: Depending on the transceiver's version, the frequencies may be different. Check for acceptable frequencies for your operating area.
✓ What is a Simplex Call??
A simplex call is a direct call to another station, not using a
repeater.
t Touch “Simplex.”
Example: Making a simplex call on 433.450 MHz.
1. “FROM” (Simplex channel) setting
q Touch [DR].
w Check whether or not “FROM” is selected.
• If “FROM” is not selected, touch the “FROM” field.
e Touch the “FROM” field.
• Opens the “FROM SELECT” screen.
“FROM” is selected.
29
y Touch a desired frequency. (Example: 433.450)
• Returns to the DR screen, and the selected frequency is displayed in “FROM.”
• “CQCQCQ” is displayed in “TO.”
- If a station call sign is set in “TO,” select “Local CQ” in the “TO
SELECT” screen to set “CQCQCQ” in “TO.”
D-STAR OPERATION
2. Hold down [PTT] to transmit
• The LED1 on the microphone lights red.
For your reference:
The simplex frequencies can be changed in the MENU
screen.
(DV memory > Repeater List > Repeater group > Simplex)
D-STAR OPERATION
When you make a simplex call in the VFO mode, the LCD
changes, as shown below.
While transmitting in the DV mode
30
4
D-STAR OPERATION
■ Accessing repeaters
This section describes how to check whether or not you can
access your local area repeater (Access repeater), and if your
signal is successfully sent to a destination repeater.
t Touch the repeater group where your access repeater is
listed. (Example: “11: Japan”)
If your call sign (MY) has not been set, or your call sign
and equipment have not been registered at a D-STAR repeater, see page ??.
1. Select your Access repeater (“FROM”)
q Touch [DR].
w Check whether or not “FROM” is selected.
y Touch your access repeater. (Example: “Hirano”)
• Returns to the DR screen, and the selected repeater name is
displayed in “FROM.”
• If “FROM” is not selected, touch the “FROM” field.
e Touch the “FROM” field.
• Opens the “FROM SELECT” screen.
r Touch “Repeater List.”
• Opens the “REPEATER GROUP” screen.
Even if you select just the repeater name, the repeater call
sign, its frequency, duplex setting, frequency offset and
Gateway call sign are automatically set.
31
D-STAR OPERATION
2. Select the Destination repeater (“TO”)
3. Check whether you can access the repeater
u Touch the “TO” field.
!2 Hold down [PTT] for approximately 1 second to access the
repeater.
• Check whether “TO” is selected.
i Touch the “TO” field again.
• Opens the “TO SELECT” screen.
o Touch “Gateway CQ.”
• Opens the “REPEATER GROUP” screen.
!0 Touch the repeater group where your destination repeater
is listed. (Example: “11: Japan”)
!1 Touch your destination repeater. (Example: “Hamacho”)
!3 If you get a reply call, or “UR?” appears on the LCD within
3 seconds, your signal reached your access repeater and
your call was successfully sent from your destination repeater.
• Returns to the DR screen, and the selected repeater name is
displayed in “TO.”
D-STAR OPERATION
Successfully sent!
NOTE: See page ??-?? for status indications after a repeater system reply is received.
32
4
D-STAR OPERATION
■ Using the RX history
When a DV call is received, the call signs of the caller, the
called station and the called station’s access repeater are
stored in the RX history file.
Up to 50 calls can be stored.
This section describes how to view the RX history screen and
how to save the call sign to memory.
When receiving a call from “JM1ZLK.”
1. To display a received call sign
q Touch the Function group icon one or more times.
• Selects the D-1 menu.
w Touch [CD].
• Opens the “RX HISTORY” screen.
• Touch [∫] or [√] one or more times to select other RX history
memories.
• The first page of the “RX HISTORY” screen displays the latest
RX record of the MAIN band. The second page or later displays
the record according to the received date and time, regardless
of the band it was received on.
Caller station
(A note may be displayed after “/”.)
The S-meter appears and the caller’s call sign is displayed.
RX message
RX HISTORY
record number
Called station
(“CQCQCQ” is displayed if you received
a Local CQ or a Gateway CQ call
First page
Current time
Displays the
detail screen
Received date and time
RX HISTORY screen
(LAST (MAIN))
Repeater call sign of the called station
33
D-STAR OPERATION
2. Save the destination call sign into your call sign memory from RX History
e Touch [∫] or [√] one or more times to select the RX HISTORY record with the call sign that you want to save to
memory.
r Touch [DETAIL].
i Touch “NAME.”
• Opens the “NAME” screen.
• Enter a name of up to 16 characters, including spaces.
(Example: TOM)
o Touch [ENT].
• Returns to the “YOUR CALL SIGN EDIT” screen.
!0 Touch “<>.”
• Opens the “Add write?” window.
t Touch [QUICK].
y Touch “Add To Your Memory.”
D-STAR OPERATION
!1 Touch [YES].
u Touch the call sign that you want to save.
(Example: “JM1ZLK”)
• Returns to the “RX HISTORY” screen.
The display opens the “YOUR CALL SIGN EDIT”
screen, and the call sign is automatically set.
34
4
D-STAR OPERATION
■ Capturing a call sign
After you receive a repeater’s signal, the calling station’s call sign can be captured by touching the Call
Sign Capture key ([RX>CS]) for 1 second. Then you can
quickly and easily reply to the call.
1. Set the received call sign to the destination
q Touch the Function group icon one or more times.
• Selects the D-1 menu.
✓ What is the Call Sign Capture key??
Touching the Call Sign Capture key for 1 second sets the last
received station call sign as a temporary destination, and
makes replying quick and easy.
D-1 menu
w Touch [RX>CS] for 1 second.
• Beep sounds when touched.
• After 1 second, two beeps sound, and the station call sign is announced.
While receiving
When you touch
[RX>CS].
When receiving a call from
“JG3LUK.”
Beeps
Call Sign Capture key
After 1 second
Beeps
JG3LU
Blinks after selecting a call sign.
35
D-STAR OPERATION
NOTE:
• After touching [RX>CS], you can select another call sign
in the RX history.
• When a received signal is weak, DR scanning or the power save is ON, the call sign may not be received correctly.
In that case, “--------” appears, an error beep sounds, and
a quick reply call cannot be made.
• The LED1 on the microphone lights red.
e Touch [RX>CS].
D-STAR OPERATION
2. Hold down [PTT] to transmit
• Returns to the previous call sign setting.
Returns to the previous screen
36
4
D-STAR OPERATION
■ Making a Local area call
A Local area call can be made when “Local CQ” is used to set
“CQCQCQ” in “TO” (Destination).
t Touch the repeater group where your access repeater is
listed. (Example: “11: Japan”)
✓ What is a Local Area Call??
To call through your local area (access) repeater.
1. Set “FROM” (Access repeater)
q Touch [DR].
w Check whether or not “FROM” is selected.
• If “FROM” is not selected, touch the “FROM” field.
e Touch the “FROM” field.
• Opens the “FROM SELECT” screen.
r Touch “Repeater List.”
• Opens the “REPEATER GROUP” screen.
37
y Touch your access repeater. (Example: “Hirano”)
• Returns to the DR screen, and the selected repeater name is
displayed in “FROM.”
D-STAR OPERATION
2. Set “TO” (Destination)
3. Hold down [PTT] to transmit
u Touch the “TO” field.
• The LED1 on the microphone lights red.
• Check whether “TO” is selected.
i Touch the “TO” field again.
• Opens the “TO SELECT” screen.
D-STAR OPERATION
o Touch “Local CQ.”
• Returns to the DR screen, and “CQCQCQ” is displayed in “TO.”
For your reference:
The Local CQ call is used to call anyone, but you can call a
specific station by simply saying their call sign.
38
4
D-STAR OPERATION
■ Making a Gateway Repeater call
A Gateway call can be made when a destination repeater is
selected in “TO” (Destination).
t Touch the repeater group where your access repeater is
listed. (Example: “11: Japan”)
✓ What is a Gateway Repeater Call??
To call through your local area (access) repeater, repeater
gateway, and the Internet to your desired destination repeater.
1. Set “FROM” (Access repeater)
q Touch [DR].
w Check whether or not “FROM” is selected.
• If “FROM” is not selected, touch the “FROM” field.
e Touch the “FROM” field.
• Opens the “FROM SELECT” screen.
r Touch “Repeater List.”
• Opens the “REPEATER GROUP” screen.
39
y Touch your access repeater. (Example: “Hirano”)
• Returns to the DR screen, and the selected repeater name is
displayed in “FROM.”
D-STAR OPERATION
2. Set “TO” (Destination)
u Touch the “TO” field.
• Check whether “TO” is selected.
i Touch the “TO” field again.
!1 Touch your destination repeater.
(Example: “Hamacho”)
• Returns to the DR screen, and the selected repeater name is
displayed in “TO.”
• Opens the “TO SELECT” screen.
3. Hold down [PTT] to transmit
o Touch “Gateway CQ.”
• The LED1 on the microphone lights red.
• Opens the “REPEATER GROUP” screen.
D-STAR OPERATION
!0 Touch the repeater group where your desired destination
repeater is listed. (Example: “11: Japan”)
For your reference:
The Gateway CQ call is used to call any repeater, but you
can call a specific station by simply saying their call sign.
40
4
D-STAR OPERATION
■ Calling an individual station
You can make a call to an individual station when the station
call sign is selected in “TO” (Destination).
When you call an individual station call sign through a gateway, your call is automatically sent to the last repeater that
the station accessed. So, even if you don’t know where the
station is, you can make a call using call sign routing.
1. Set “FROM” (Access repeater)
q Touch [DR].
w Check whether or not “FROM” is selected.
• If “FROM” is not selected, touch the “FROM” field.
e Touch the “FROM” field.
• Opens the “FROM SELECT” screen.
r Touch “Repeater List.”
• Opens the “REPEATER GROUP” screen.
41
t Touch the repeater group where your access repeater is
listed. (Example: “11: Japan”)
y Touch your access repeater. (Example: “Hirano”)
• Returns to the DR screen, and the selected repeater name is
displayed in “FROM.”
D-STAR OPERATION
2. Set “TO” (Destination)
3. Hold down [PTT] to transmit
u Touch the “TO” field.
• The LED1 on the microphone lights red.
• Check whether “TO” is selected.
i Touch the “TO” field again.
• Opens the “TO SELECT” screen.
o Touch “Your Call Sign.”
• Opens the “YOUR CALL SIGN” screen.
D-STAR OPERATION
!0 Touch the destination station. (Example: “TOM”)
• Returns to the DR screen, and the selected station name is displayed in “TO.”
42
4
D-STAR OPERATION
■ Troubleshooting
To communicate through the repeater, your signal must access to the repeater. When your signal accesses your local repeater,
but it is not sent to the destination repeater, the repeater replies with an status message.
PROBLEM
POSSIBLE CAUSE
SOLUTION
REF.
After your call, the repeater does • The repeater setting is wrong.
• Select the correct repeater.
not return a status reply.
• Your transmission did not reach the repeat- • Correct the repeater frequency, frequency
er.
offset, or duplex setting.
• Wait until you are closer to the repeater and
try again.
• Try to access another repeater.
p. ?
p. ?
After your call, the repeater • The call was successfully sent, but no sta- • Wait for a while, and try again.
replies ‘UR?’ and its call tion immediately replied.
—
—
—
sign.
• Set your call sign (MY).
p. ?
After your call, the repeater • Your call sign (MY) has not been set.
p. ?
replies ‘RX’ or ‘RPT?’ and the • Your call sign (MY) has not been registered
on a gateway repeater, or the registered • Register your call sign (MY) on a D-STAR
access repeater’s call sign.
contents do not match your transceiver’s
setting.
43
repeater, or confirm the registration of the
call sign.
D-STAR OPERATION
POSSIBLE CAUSE
SOLUTION
REF.
After your call, the repeater re- • The repeater cannot connect to the destina- • Check the repeater setting.
plies ‘RPT?’ and call sign of the tion repeater.
destination repeater.
• The repeater is busy.
• Wait for a while, and try it again.
p. ?
After your call, the access re- • The call sign of the destination repeater is • Correctly set the destination repeater call
peater replies ‘RPT?’ and its call wrong.
sign.
sign.
Even holding down [DR], the DR • There is no repeater list in your radio.
• Reload the repeater list using the SD card.
screen will not appear.
• Enter the Repeater list data directly into the
transceiver.
Even holding down [RX>CS], the • The call sign has not been correctly re- • Try it again, after the transceiver has correceived call sign will not set to ceived.
rectly received the call sign.
the destination call sign.
• When a received signal is weak, or a signal
p. ?
—
p. ?
Section 7 of the
Full Instruction
—
is received during scanning, the call sign
may not be received correctly. In that case,
“--------” appears and error beeps sound,
and a reply call cannot be made.
A Local area call can be made, • MY call sign has not been registered at a • Register your call sign (MY) on a D-STAR p. ?
but the Gateway call or destina- D-STAR repeater.
repeater, or confirm the registration of the
tion station call cannot be made.
call sign.
D-STAR OPERATION
PROBLEM
“L” appears on the LCD, and the • While receiving through the internet, some • Wait a while, and try it again.
—
received audio is interrupted.
packets may be lost due to a network error
When the transceiver receives corrupted
(poor data throughput performance).
data, and misidentifies it is as packet loss,
“L” is displayed, even if it is a Local area
call.
“DV” and “FM” icons alternately • While in the DV mode, an FM signal is re- • Wait a while, and try it again.
blink.
ceived.
p. ?
44
4
D-STAR OPERATION
■ Reflector operation
D What is the reflector?
D Using a reflector
A reflector is a special server connected to the internet and
running a version of dplus software. If the dplus software is
installed on your access repeater, it provides various functions
including gateway and reflector linking capabilities (It is known
as the D-STAR reflector system). The D-STAR reflector system
enables a number of D-STAR repeaters around the world to
link to a reflector. This means that when you transmit through
a D-STAR repeater linked to a reflector, your voice can be
heard on other repeaters linked to the reflector, and you can
hear other stations that are connected to the reflector.
q Touch [DR].
w Check whether or not “TO” is selected.
D-STAR reflector system
• If “TO” is not selected, touch the “TO” field.
e Touch the “TO” field.
• Opens the “TO SELECT” screen.
r Touch “Reflector.”
• Opens the “REFLECTOR” screen.
t Touch “Use Reflector.”
• The transceiver returns to the DR screen.
• “Use Reflector” and “CQCQCQ” are displayed in “TO.”
INTERNET
Access repeater
USA
INTERNET
INTERNET
UK
Reflector
JPN
INTERNET
AUS
y Hold down [PTT] to transmit.
• The LED1 on the microphone lights red.
45
D-STAR OPERATION
D Linking to a reflector
If your repeater is not currently linked to a reflector, or you
want to change to another reflector, you can do so following
the steps below. Before linking to another reflector, be sure to
unlink the current reflector. (p. ??-??)
t Touch “Link to Reflector.”
y Touch “Direct Input.”
u Touch [+] or [–] one or more times to select the reflector
number. (Example: 010)
• Touch [] to cancel, and then return to the previous screen.
Direct inputting
q Touch [DR].
w Check whether or not “TO” is selected.
• If “TO” is not selected, touch the “TO” field.
e Touch the “TO” field.
• Opens the “TO SELECT” screen.
i Touch [+] or [–] one or more times on the right-end box to
select the module letter. (Example: B)
o Touch [SET].
• The transceiver returns to the DR screen.
• “Link to Reflector” and “REF010BL” are displayed in “TO.”
D-STAR OPERATION
Example: Directly enter “REF010BL.”
r Touch “Reflector.”
• Opens the “REFLECTOR” screen.
!0 Hold down [PTT] to link to the reflector.
• The LED1 on the microphone lights red.
46
4
D-STAR OPERATION
■ Reflector operation
D Linking to a reflector (Continued)
Using the TX History
The TX History stores the up to 5 reflectors that your access
repeater linked before.
t Touch “Link to Reflector.”
Example: Select the “REF002AL” in the TX History.
q Touch [DR].
w Check whether or not “TO” is selected.
• If “TO” is not selected, touch the “TO” field.
e Touch the “TO” field.
• Opens the “TO SELECT” screen.
y Touch the reflector that you want to link to.
(Example: “REF002AL”)
• The transceiver returns to the DR screen.
• “Link to Reflector” and “REF002AL” are displayed in “TO.”
r Touch “Reflector.”
• Opens the “REFLECTOR” screen.
!0 Hold down [PTT] to link to the reflector.
• The LED1 on the microphone lights red.
47
D-STAR OPERATION
D Unlinking a reflector
Before linking to another reflector, be sure to unlink the current reflector.
t Touch “Unlink Reflector.”
• The transceiver returns to the DR screen.
• “Unlink Reflector” and “U” are displayed in “TO.”
q Touch [DR].
w Check whether or not “TO” is selected.
• If “TO” is not selected, touch the “TO” field.
e Touch the “TO” field.
• Opens the “TO SELECT” screen.
r Touch “Reflector.”
• Opens the “REFLECTOR” screen.
y Hold down [PTT] to unlink the reflector.
• The LED1 on the microphone lights red.
D-STAR OPERATION
48
4
D-STAR OPERATION
■ Reflector operation (Continued)
D Reflector Echo Testing
You can transmit a short message, and after releasing [PTT],
your message will be played back. It is a useful check of how
well your signal is getting into the repeater, and you can use it
to verify that your repeater is operating normally.
t Touch “Echo Test.”
• The transceiver returns to the DR screen.
• “Echo Test” and “E” are displayed in “TO.”
q Touch [DR].
w Check whether or not “TO” is selected.
• If “TO” is not selected, touch the “TO” field.
e Touch the “TO” field.
• Opens the “TO SELECT” screen.
r Touch “Reflector.”
• Opens the “REFLECTOR” screen.
y Hold down [PTT] and speak into the microphone.
• The LED1 on the microphone lights red.
u Release [PTT] to hear your message.
49
D-STAR OPERATION
D Requesting repeater information
When you send the repeater information command, an ID
message is sent back.
q Touch [DR].
w Check whether or not “TO” is selected.
t Touch [√] to select the next page.
y Touch “Repeater Information.”
• The transceiver returns to the DR screen.
• “Repeater Information” and “I” are displayed in “TO.”
• If “TO” is not selected, touch the “TO” field.
e Touch the “TO” field.
D-STAR OPERATION
• Opens the “TO SELECT” screen.
r Touch “Reflector.”
• Opens the “REFLECTOR” screen.
u Hold down [PTT] to send the repeater information command.
• The LED1 on the microphone lights red.
i Release [PTT] to hear the repeater ID message.
50
4
D-STAR OPERATION
■ Updating the repeater list
For easy operation, the repeater list is preloaded into your
transceiver.
This section describes how to manually update the repeater
list using an SD card.
The latest setting file, which includes the repeater list, can be
downloaded from the Icom website.
ID-5100’s latest setting file is uploaded to “Cloning
software(Rev. MM) and manuals” on the Icom website
screen.
• The displayed contents may differ.
1. Downloading the latest setting file (ICF file)
q Access the following URL to download the latest data.
http://www.icom.co.jp/world/support/download/firm/index.
html
• The latest settings file (ICF file) and repeater list (CSV: Comma
Separated Values file) are contained in the downloaded ZIP file.
File Name: 5100_U_140401.zip (Example)
Depending on the
updated file date.
Depending on the version.
51
ID-5100
Cloning software(Rev. MM) and manuals
2014/MM/MM
w Decompress the compressed file that you downloaded
from the Icom website.
The “5100_U_140401” folder will be created in the same
place where the downloaded file is saved.
D-STAR OPERATION
2. Inserting the SD card into a PC
e Insert the SD card into the SD card drive on your PC.
• Icom recommends that you format all SD cards to be used with
the ID-5100, even preformatted SD cards for PCs or other uses.
(p. ??-??)
DoubleClick
PC
Transceiver
DoubleClick
SD card
to the external
card reader
D-STAR OPERATION
See page ??-?? and ??-?? for details on inserting
and removing the SD card.
3. Copying the latest ICF file to the SD card
r Double-click the “5100_U_140401” folder created in the
same place where the downloaded file is saved.
t Copy the CSV file (Example: “5100_USA_140401.csv”) in
the folder to [RptList] of the SD card.
[ID-5100] > [CSV] > [RptList]
The copied CSV
file is placed here
☞ Continued on the next page
52
4
D-STAR OPERATION
■ Updating the repeater list (Continued)
4. Inserting the SD card
5. Updating the repeater list
y Remove the SD card from your PC, and insert it into the
transceiver’s slot.
u Touch [MENU].
i Touch [Repeater list].
(SD Card > Import/Export > Import > Repeater list)
See page ??-?? for details on inserting the SD
card into the transceiver.
• If the item is not displayed, touch [∫] or [√] one or more times to
select another page.
PC
Transceiver
o Touch the CSV file to be loaded.
(Example: “5100_USA_140401.csv”)
SD card
from the external
card reader
Icom recommends that you save the current data before
loading other data into the transceiver.
53
• The “Keep 'SKIP' settings in Repeater List?” window appears.
D-STAR OPERATION
!0 Touch [YES] or [NO].
• When you touch [YES], the skip settings of the repeater list are
retained.
• When you touch [Cancel], returns to the “LOAD FILE” screen.
For your reference:
If you copy the ICF file to [Setting] of the SD card, the repeater list can be updated with the same procedures. In this
case, touch “Load Setting.”
(SD Card > Load Setting)
In the LOAD FILE screen, touch “Repeater List Only.”
!1 When the “Import file?” appears, Touch [YES].
• Starts to import.
• While importing, “IMPORT” and a progress bar are displayed.
D-STAR OPERATION
!4 After importing ends, “COMPLETED!” appears.
To complete the importing, reboot the transceiver.
54
5
RECORDING A QSO ONTO AN SD CARD
■ About the SD card
The SD and SDHC cards are not available from Icom. Purchase separately.
An SD card of up to 2 GB, or an SDHC of up to 32 GB, can
be used with the ID-5100.
Icom has checked the compatibility with the following SD and
SDHC cards.
(As of March 2014)
Brand
Type
Memory size
SD
2 GB
4 GB
SanDiskÂŽ
SDHC
8 GB
16 GB
32 GB
• The above list does not guarantee the card’s performance.
• Throughout the rest of this document, the SD card and an
SDHC card are simply called SD cards.
• Icom recommends that you format all SD cards to be used
with the ID-5100, even preformatted SD cards for PCs or
other uses.
Saving the factory default data is recommended. Insert the
card into the transceiver’s slot, and then touch [MENU].
Touch “SD Card,” and then “Save Setting” to save.
55
NOTE:
• Before using the SD card, read the instructions of the SD
card thoroughly.
• If you do any of the following, the SD card data may be
corrupted or deleted.
- You remove the SD card from the transceiver while accessing the SD card.
- You change the external power supply’s voltage while
accessing the SD card.
- You start the vehicle engine while accessing the SD
card.
- You drop, impact or vibrate the SD card.
• Do not touch the contacts of the SD card.
• The transceiver takes a longer time to recognize a high
capacity SD card.
• The SD card will get warm if used continuously for a long
period of time.
• The SD card has a certain lifetime, so data reading or writing may not be possible after using it for a long time period.
• When reading or writing data is impossible, the SD card’s
lifetime has ended. In this case, purchase a new one. We
recommend you make a backup file of the important data
onto your PC.
• Icom will not be responsible for any damage caused by
data corruption of an SD card.
RECORDING A QSO ONTO AN SD CARD
D Inserting the SD card
q Turn OFF the transceiver.
w Insert the card into the slot until it locks in place, and
makes a ‘click’ sound.
• “ ” is displayed when the SD card is inserted.
• “ ” and “ ” alternately blink while accessing the SD card.
NOTE: Before inserting, be sure to check the card direction. If the card is forcibly or inversely inserted, it will damage the card and/or the slot.
Front panel
(Main unit)
D Formatting the SD card
• If you use a brand new SD card, format it by doing the
following steps.
• Formatting a card erases all its data. Before formatting
any used card, back up its data onto your PC.
q Turn OFF the transceiver, and then insert the card into the
slot.
w Turn ON the transceiver.
• “ ” appears when the SD card is inserted.
e Touch [MENU].
r Touch “SD Card.”
• If the item is not displayed, touch [∫] or [√] one or more times to
select the page.
t Touch “Format.”
• The confirmation window “Format OK?” appears.
Cut corner side
SD card
Terminals
facing down
Displayed
y Touch [YES].
• The formatting starts and the display shows the formatting progress.
• After formatting ends, the display automatically returns to the
screen displayed before the “Format OK?” window.
RECORDING A QSO ONTO
AN SD CARD
■ Inserting the SD card
56
5
RECORDING A QSO ONTO AN SD CARD
■ Recording a QSO audio
q Touch the Function group icon one or more times.
• When displaying the DR screen, selects the D-3 menu.
• While in the VFO, Memory or Call CH mode, displays the F-3
menu.
e Touch the record icon.
• The “Stop recording?” dialog box appears.
w Touch [REC].
• The “Recording started” dialog box appears, and voice recording
starts.
• “ ” is displayed while the transceiver is recording.
• “ ” is displayed while the recording is paused.
• Recording is continuous until you manually stop recording, or
the card becomes full.
• If the recording file’s content reaches 2GB, the transceiver automatically creates a new file, and continues recording.
r Touch [YES].
• The “Recording stopped” dialog box appears, and voice recording stops.
NOTE:
Once the voice recording starts, it will continue until
you stop recording, even if you turn OFF the transceiver.
57
For your reference:
When the PTT Automatic Recording function is set to ON
in the MENU screen, the recording automatically starts
when [PTT] is pushed.
(Voice Memo > QSO Recorder > Recorder Set >
PTT Auto REC)
5
RECORDING A QSO ONTO AN SD CARD
■ Playing back the recorded audio
■ Removing the SD card
q Touch [MENU].
w Touch “Play Files.”
(Voice Memo > QSO Recorder > Play Files)
D Removing the SD card
• If the item is not displayed, touch [∫] or [√] one or more times to
select another page.
q Turn OFF the power.
w Push in the SD card until a
click sounds, and then carefully pull it out.
Push
e Touch the folder that contains the file you want to play.
• The file list is displayed.
• The folder name is named yyyymmdd (y: year, m: month,
d: day.)
r Touch the file that you want to play.
• The “VOICE PLAYER” screen is displayed, and the file starts to
playback.
• See the Full Instructions for details.
Pull out
D Removing the SD card while the transceiver’s power is ON
q Touch [MENU].
w Touch “SD Card.”
• If the item is not displayed, touch [∫] or [√] one or more times to
select the page.
e Touch “Unmount.”
• The confirmation window “Unmount OK?” appears.
RECORDING A QSO ONTO
AN SD CARD
Front panel
(Main unit)
r Touch [YES].
t Touch [MENU].
• Stops the playback, and close the “VOICE PLAYER”
screen.
• When the unmounting is completed, “Unmount is completed.” is
displayed, then the display automatically returns to the screen
displayed before the “Unmound OK?” window.
t Push in the SD card until a click sounds, and then carefully
pull it out.
58
6
GPS OPERATION
■ GPS operation
■ Checking your GPS position
The transceiver has a built-in internal GPS receiver.
You can check your current position, and transmit GPS
data in the DV mode.
You can check your current position.
If you transmit while displaying the GPS position screen, the
screen closes.
But you can check your current position, RX position, and so
on by touching the GPS icon while transmitting.
D GPS receive setting
Check whether or not the GPS receiver is receiving your position.
The GPS icon blinks when searching for satellites.
➪
➪
➪
D Displaying Position Data
q Touch the GPS icon.
The GPS icon stops blinking when the minimum needed
number of satellites is found.
w Touch [GPS Position].
• Opens the “GPS POSITION” screen.
• It may take only a few seconds to receive. But depending on the
environment, it may take a few minutes. If you have difficulties receiving, we recommend that you try a different location.
• When “GPS Select” item is set to “Manual,” the icon does not appear.
(GPS > GPS Set > GPS Select)
59
CALLING A DESTINATION STATION
D About the GPS Position screen
• Selects the page.
My position
screen (MY)
Received position
screen (RX)
Compass
direction top
is North.
Your course
heading is
East.
Your course
direction is
95° degrees.
Shows My
position
GPS memory
position screen
(MEM)
GPS alarm
position screen
(ALM)
Latitude
Longitude
Grid locator
Altitude
Speed
Time
“GPS POSITION” screen (MY)
CALLING A DESTINATION STATION
e Touch [∫] or [√] one or more times.
r Touch [].
• Closes the “GPS POSITION” screen.
60
7
MENU SCREEN
■ Menu item selection
The Menu screen is used to program infrequently changed
values or function settings.
In addition to this page, see pages ?? through ?? for details
of each item’s options and their default value.
r Touch “Auto Power OFF.”
• If you continuously touch [∫] or [√], the items are quickly
scrolled.
NOTE: The Menu system is constructed in a tree structure.
You may go to the next tree level, or go back a level, depending on the selected item.
D Entering the Menu screen
t Touch “30min.”
Example: Set the Auto Power OFF function to “30 min.”
q Touch [MENU].
w Touch [∫] or [√] one or more times to select the page.
• If you continuously hold down [∫] or [√], the items are quickly
scrolled.
• To set other item, touch [] to go back a tree level.
e Touch “Time Set.”
y Touch [MENU]
• Closes the Menu screen.
To return to the default setting,
touch [QUICK] in step t, and
then touch “Default,”.
61
MENU SCREEN
■ Menu items and Default settings
NOTE: The default settings shown in bold letters below are for the USA version.
The default settings may differ, depending on your transceiver version.
DUP/TONE...
Offset Freq
Settings to access repeaters.
0.000~0.600.00*~59.995 MHz
Sets the frequency offset for duplex (repeater) operation.
* The default value may differ, depending on the frequency
band (selected as the MAIN band before entering the
Menu screen) and the transceiver version.
67.0~88.5~254.1 Hz
TSQL Freq
67.0~88.5~254.1 Hz
Tone Burst
OFF or ON
DTCS Code
023~754
DTCS Polarity
Both N, TN-RR, TR-RN or Both R
Digital Code
00~99
Manage Memory
Memory CH
Call CH
Selects a tone frequency used to access the repeaters.
Selects a tone frequency for the Tone squelch or the
pocket beep function.
Turns the Tone Burst function ON or OFF.
This function is used to suppress the squelch tail noise
heard from the transceier's speaker.
Selects a DTCS (both encoder/decoder) code for
DTCS squelch or the pocket beep function.
Selects the DTCS polarity for the DTCS squelch or
the pocket beep function.
Selects a digital code for the Digital Code squelch
function.
MENU SCREEN
Repeater Tone
Manage your Memory or Call channel data.
ALL, A~Z
Manages for the Memory channels.
C0/C1(144):146.010 FM
Manages for the Call channels.
C0/C1(430):440.000 FM
62
7
MENU SCREEN
■ Menu items and Default settings (Continued)
Scan
Pause Timer
Set scan options.
2sec~10sec~20sec or HOLD
Resume Timer
0sec~2sec~5sec or HOLD
Temporary Skip Timer
5min, 10min or 15 min
Program Skip
OFF or ON
Bank Link
A: ✔ ~Z: ✔
Program Scan Edge
Program Link
00~24
See page ??-?? on the ??? for details of the preset values.
Voice Memo
QSO Recorder
<>*
Play Files*
Recorder Set
REC Mode
RX REC Condition
File Split
Set the TX/RX voice recording options.
PLAY FILES
TX&RX or RX Only
Always or Squelch Auto
OFF or ON
* Be sure to insert the SD card into the transceiver before selecting these items.
63
Selects the scan pause time. When receiving signals,
the scan pauses according to the scan pause timer.
Selects the scan resume time from a pause after the
received signal disappears.
Selects the Temporary Skip Time. When the time is
set, specified frequencies are skipped for this period
during a scan.
Turns the Program Skip Scan function ON or OFF for
a VFO mode scan.
Selects banks to be scanned during a Bank Link
Scan.
Sets the frequency ranges for the program scan.
Sets the link function for the program scan edge
channels.
Starts recording the received signal audio.
Plays or deletes the recorded audio.
Selects to record the TX audio or not.
Selects whether or not the squelch status affects the
RX voice audio recording.
Selects whether or not to automatically create a new
file if transmission and reception, or squelch status
(open and close) is switched.
MENU SCREEN
Player Set
Skip Time
OFF or ON
Turns the PTT Automatic Recording function ON or
OFF.
3sec, 5sec, 10sec or 30sec
Sets the Skip time to rewind or forward the recorded
audio when you push the fast-rewind or fast-forward
key during playback.
Records a voice audio to use the Auto Reply function
in the DV mode.
DV Auto Reply*
Voice TX
Record*
TX Set
Repeat Time
TX Monitor
<>*
GPS
GPS Set
GPS Select
Manual Position
GPS Out (To DATA Jack)
GPS TX Mode
OFF
D-PRS
Unproto Address
Set microphone voice recording options.
T1~T4
Starts recording the microphone audio.
1sec~5sec~15sec
OFF or ON
T1~T4, Repeat TX
Sets the repeat interval. The transceiver repeatedly
transmits the recorded voice audio at this interval.
The TX Monitor function outputs the TX voice audio
from the speaker during voice transmission.
The transceiver transmits the recorded voice audio.
Set GPS options.
OFF, Internal GPS or Manual
OFF or ON
Selects the position data source that the transceiver
uses for its position data.
Manually enter your current position.
Selects to output the GPS information to the [DATA]
jack
MENU SCREEN
PTT Auto REC
Turns OFF the GPS TX function.
API510,DSTAR*
Enters an unproto address, or keep the default.
* Be sure to insert the SD card into the transceiver before selecting these items.
64
7
MENU SCREEN
■ Menu items and Default settings (Continued)
TX Format
Position
Symbol
SSID
Comment
Time Stamp
Altitude
Data Extension
Power
Height
Gain
Directivity
Object
Object Name
Data Type
Symbol
Comment
Position
Data Extension
Course
Speed
65
1:Car, 2:Van, 3:Truck or 4:House QTH (VHF) Selects a desired D-PRS Symbol to transmit.
- - -, (-0), -1~-15 or -A~-Z
Selects the APRSÂŽ call sign SSID.
Enters a comment to transmit.
OFF, DHM or HMS
Selects a format to transmit the current UTC time as
a time stamp.
OFF or ON
Turns the altitude transmit option ON or OFF.
OFF, Course/Speed or
Selects whether to transmit the course/speed data,
Power/Height/Gain/Directivity
power/height/gain/directivity data or not.
0W, 1W, 4W, 9W, 16W, 25W, 36W, Selects the TX power level information to send when
49W, 64W or 81W
using as a base station.
10ft, 20ft, 40ft, 80ft, 160ft, 320ft, Selects the antenna height information to send when
640ft, 1280ft, 2560ft, 5120ft
using as a base station.
0dB~9dB
Selects the antenna gain information to send when
using as a base station.
0mni, 45°NE, 90°E, 135°SE, 180°S, Selects the antenna directivity information to send
225°SW, 270°W, 315°NW, 360°N
when using as a base station.
Live Object, Killed Object
Radio
OFF, Course/Speed or
Power/Height/Gain/Directivity
0°~360°
0mph~1150mph
Enters a object station name to transmit.
Selects a object station’s status to transmit.
Selects a object station’s symbol to transmit.
Enters a object station’s comment to transmit.
Sets a object station’s position data to transmit.
Selects whether to transmit the object station’s course/
speed data, power/height/gain/directivity data or not.
Sets a object station’s course to transmit.
Sets a object station’s speed to transmit.
MENU SCREEN
Height
Gain
Directivity
SSID
Time Stamp
Item
Item Name
Data Type
Symbol
Comment
Position
Data Extension
Course
Speed
Power
Height
Gain
Directivity
0W, 1W, 4W, 9W, 16W, 25W, 36W,
49W, 64W or 81W
10ft, 20ft, 40ft, 80ft, 160ft, 320ft,
640ft, 1280ft, 2560ft, 5120ft
0dB~9dB
Selects a object station’s TX power level to transmit.
Selects the antenna height of the object station to
transmit.
Selects the antenna gain of the object station to
transmit.
0mni, 45°NE, 90°E, 135°SE, 180°S, Selects the antenna directivity of the object station
225°SW, 270°W, 315°NW, 360°N
to transmit.
- - -, (-0), -1~-15 or -A~-Z
Selects the APRSÂŽ call sign SSID for the object station.
OFF, DHM or HMS
Selects a format to transmit the current UTC time as
a time stamp.
Enters a item station name to transmit.
Selects a item station’s status to transmit.
Selects a item station’s symbol to transmit.
Enters a item station’s comment to transmit.
Sets a item station’s position data to transmit.
OFF, Course/Speed or
Selects whether to transmit the item station’s course/
Power/Height/Gain/Directivity
speed data, power/height/gain/directivity data or not.
0°~360°
Sets a item station’s course to transmit.
0mph~1150mph
Sets a item station’s speed to transmit.
0W, 1W, 4W, 9W, 16W, 25W, 36W, Selects a item station’s TX power level to transmit.
49W, 64W or 81W
10ft, 20ft, 40ft, 80ft, 160ft, 320ft, Selects the antenna height of the item station to
640ft, 1280ft, 2560ft, 5120ft
transmit.
0dB~9dB
Selects the antenna gain of the item station to transmit.
0mni, 45°NE, 90°E, 135°SE, 180°S, Selects the antenna directivity of the item station to
225°SW, 270°W, 315°NW, 360°N
transmit.
Live Item, Killed Item
Radio
MENU SCREEN
Power
66
7
MENU SCREEN
■ Menu items and Default settings (Continued)
SSID
- - -, (-0), -1~-15 or -A~-Z
Selects the APRSÂŽ call sign SSID for the item station.
Weather
Symbol
SSID
WX Station
- - -, (-0), -1~-15 or -A~-Z
Selects a weather station’s symbol to transmit.
Selects the APRSÂŽ call sign SSID for the weather
station.
Enters a weather station’s comment to transmit.
Selects a format to transmit the current UTC time as
a time stamp.
Comment
Time Stamp
NMEA
GPS Sentence
GPS Message
GPS Information
GPS Position
GPS Memory
GPS Alarm
Alarm Select
Alarm Area (Group)
Alarm Area (RX/Memory)
GPS Logger*
GPS Logger
Record Interval
GPS Auto TX
OFF, DHM or HMS
RMC, GGA, GLL, VTG, GSA or GSV Transmits position data in selected GPS sentences.
Enter a GPS message to be transmitted.
Displays the received GPS information.
Displays your position, RX station, GPS memory and
Alarm positions.
(No Group), A~Z
Shows the GPS memory contents.
OFF, RX, Group or Memory
0’05”/0.08’~0’15”/0.25’~
59’59”/59.99’
Limited, Extended or Both
OFF or ON
Select the GPS alarm active range.
Turns the GPS logger function ON or OFF, to store
your route as you move.
1sec, 5sec, 10sec, 30sec or 60sec Selects the GPS Logger function record interval.
OFF, 5sec, 10sec, 30sec, 1min, Selects a time option for the GPS automatic trans3min, 5min, 10min or 30min
mission function.
* Be sure to insert the SD card into the transceiver before selecting these items.
67
Select the target for the GPS alarm function.
Enter the GPS alarm active range.
MENU SCREEN
Call Sign
UR: CQCQCQ, R1: --------,
R2: --------, MY: --------
Set and display the DV mode call signs.
Displays the operating call signs.
Sets the operating call signs according to the type of
call you want to make.
RX History
LAST (MAIN)
Displays the received call history in the DV mode.
Displays the calls your transceiver received.
DV Memory
Your Call Sign
Stores call signs or repeater information to use in the DV mode.
Blank
Stores station call signs.
Add or edit call signs.
Repeater List
01:~30:
Stores repeater information.
Add or edit repeater information.
(See page ??-?? on ??? for details of
the preloaded data.)
My Station
My Call Sign
TX Message
DV Set
Tone Control
RX Bass
Sets and stores your call sign to use in the DV mode.
1:~6:
Stores your call signs.
Select or edit a call sign to use in the DV mode.
1:~5: or OFF
Stores TX Messages.
Select or edit TX Message to use in the DV mode.
Sets values for the DV mode operations.
Cut, Normal or Boost
RX Treble
Cut, Normal or Boost
RX Bass Boost
OFF or ON
MENU SCREEN
NOTE: The repeater list described in this manual may differ from your preloaded list.
Sets the DV mode received audio bass filter level to
Cut, Normal or Boost.
Sets the DV mode received audio treble filter level to
Cut, Normal or Boost.
Turns the DV mode received audio Bass Boost function ON or OFF
68
7
MENU SCREEN
■ Menu items and Default settings (Continued)
TX Bass
TX Treble
Auto Reply
DV Data TX
Digital Monitor
Digital Repeater Set
DV Auto Detect
RX Record (RPT)
BK
EMR
EMR AF Level
69
Cut, Normal or Boost
Sets the DV mode transmit audio bass filter level to
Cut, Normal or Boost.
Cut, Normal or Boost
Sets the DV mode transmit audio treble filter level to
Cut, Normal or Boost.
OFF, ON, Voice, Position (Main Only) Selects the Automatic Reply function.
or Position (Main/Sub)
PTT or Auto
Selects manually or automatically to transmit low
speed data.
Auto, Digital or Analog
Selects the DV mode RX monitoring when [SQL] is
held down.
OFF or ON
Turns the digital repeater setting function ON or OFF.
This function is usable in any DV mode except using
the DR function.
OFF or ON
Turns the DV mode automatic detect function ON or
OFF.
ALL or Latest Only
The transceiver can record the data of up to 50 individual calls.
OFF or ON
Turns the BK (Break-in) function ON or OFF. The BK
function allows you to break into a conversation between two stations with call sign squelch enabled.
OFF or ON
Turns the EMR (Enhanced Monitor Request) communication mode ON or OFF.
After turning OFF the transceiver, the EMR mode will
be cancelled.
0~19~39
Sets the audio output level when an EMR mode signal is received.
MENU SCREEN
Sets the Speech functions.
OFF, ON (Kerchunk) or ON (All)
RX>CS SPEECH
DIAL SPEECH
MODE SPEECH
OFF or ON
OFF or ON
OFF or ON
SPEECH Language
English or Japanese
Alphabet
SPEECH Speed
SPEECH Level
Normal or Phonetic Code
Slow or Fast
0~7~9
DTMF
DTMF Memory
Sets the DTMF Memory functions.
d0:~d9:, dA:~dD:, d*: or d#:
DTMF Speed
100ms, 200ms, 300ms or 500ms
QSO/RX Log
QSO Log*1
RX History Log*1
CSV Format
Separator/Decimal
Date
Selects the RX call sign speech function option while
ON, or turn it OFF.
Turns the RX>CS Speech function ON or OFF.
Turn the Dial Speech function ON or OFF.
Turn the Operating Mode Speech function ON or
OFF.
Selects either English or Japanese as the desired
speech language.
Selects the alphabet character announcement type.
Selects Slow or Fast speech speed
Sets the volume level for the voice synthesizer.
Shows a list of the DTMF memory channels. The
DTMF memory can store up to 24-digit DTMF code.
Selects the DTMF transfer speed.
Sets the QSO/RX History Log options.
OFF or ON
Selects to make a communication log on the SD
card, or not.
OFF or ON
Selects to make a DV mode's receive history log on
the SD card, or not.
MENU SCREEN
SPEECH
RX Call Sign SPEECH
Sep [,] Dec [.]*2, Sep [;] Dec [.] or Selects the separator and the decimal character for
Sep [;] Dec [,]
the CSV format.
yyyy/mm/dd, mm/dd/yyyy*2 or dd/ Selects the date format.
mm/yyyy
*1 Be sure to insert the SD card into the transceiver before selecting these items.
*2 The default value may differ, depending on the transceiver version.
70
7
MENU SCREEN
■ Menu items and Default settings (Continued)
Function
Squelch/ATT Select
Squelch Delay
Fan Control
Dial Speed-UP
Auto Repeater
Remote MIC Key
During RX/Standby
During TX
Up/Down MIC Key
During RX/Standby
During TX
One-Touch PTT(Remote MIC)
PTT Lock
Busy Lockout
Time-Out Timer
Active Band
MIC Gain
71
Sets various function’s options.
OFF, S-Meter Squelch, ATT
Selects to use the S-Meter Squelch or the Attenuator
function for the [SQL] control.
Short, Long
Selects to shorten or lengthen the time until the
squelch opens.
Slow, Mid, Fast or Auto
Selects the cooling fan control condition.
OFF or ON
Turns the dial speed acceleration ON or OFF.
OFF or ON (DUP), ON (DUP,TONE) Turns the Auto Repeater function ON or OFF.
Selects the key function for [F-1] or [F-2] on the supplied remote-control microphone.
[F-1]:BAND/BANK [F-2]:MONITOR Selects the key function to be used while receiving or
in the standby mode.
[F-1]:T-CALL [F-2]:--Selects the key function to be used while transmitting.
Selects the key function for [UP] or [DN] on the optional hand microphone.
[UP]:UP [DN]:DOWN
Selects the key function to be used while receiving or
in the standby mode.
[UP]:--- [DN]:--Selects the key function to be used while transmitting.
OFF or ON
Turns the One-Touch PTT function ON or OFF.
OFF or ON
Turns the PTT Lock function ON or OFF.
OFF or ON
Turns the Busy Lockout function ON or OFF.
OFF, 1min, 3min, 5min, 10min,
Selects the Time-Out Timer time options.
15min or 30min
Single or All
Allows continuous frequency selection across all
bands by rotating [DIAL].
1~2~4
Sets the microphone sensitivity to suit your preference.
MENU SCREEN
Main Select or Function Select
Ten-key, Full keyboard
Data Speed
4800bps or 9600bps
CI-V
CI-V Address
01~8Ch~DF
CI-V Baud Rate
CI-V Transceive
CI-V Bluetooth➝REMOTE
transceive Address
4800, 9600, 19200 or Auto
OFF or ON
00h~DFh
Heterodyne
Heterodyne (A BAND VHF)
Normal or Reverse
Heterodyne (A BAND UHF)
Normal or Reverse
Heterodyne (B BAND UHF)
Normal or Reverse
Power OFF (With No Controller) OFF or ON
Sets the touch operation on the SUB band display.
Selects the keyboard input type to enter a call sign,
memory name, and so on.
Selects the data transmission speed for low-speed
communication, or between the [DATA] jack and external modules like a GPS receiver, and so on.
Sets the transceiver's unique CI-V hexadecimal address code.
Sets the CI-V code transfer speed.
Turns the CI-V Transceive function ON or OFF.
Sets the address to inhibit the external control with
CI-V for the transceiver through the [SP2] (REMOTE)
jack.
Effective to eliminate internal spurious that may occur in a rare combination of dual band frequencies,
when operating VHF on the A band.
Effective to eliminate internal spurious that may occur in a rare combination of dual band frequencies,
when operating UHF on the A band.
Effective to eliminate internal spurious that may occur in a rare combination of dual band frequencies,
when operating UHF on the B band.
Selects whether or not to automatically turn OFF the
transceiver when the controller is disconnected from
the transceiver.
MENU SCREEN
Touch Operation (Sub)
Keyboard Type
72
7
MENU SCREEN
■ Menu items and Default settings (Continued)
Display
Backlight
Auto Dimmer
Auto Dimmer Timer
Touch Operation (Dimmed)
LCD Contrast
RX Call Sign
RX Position Indicator
RX Position Display
RX Position Display Timer
Reply Position Display
TX Call Sign
Scroll Speed
Opening Message
Voltage (Power ON)
Display Unit
73
Sets the Display options.
1~8
OFF, Auto-OFF, Auto-1~7
Selects the transceiver backlight option.
Sets the Auto dimmer function, and the dimmer level.
5sec, 10sec
Selects the backlight ON time period.
Brighten, Brighten & Action
Selects whether or not to brighten and make an action when you touch the dimmed panel.
1~8~16
Sets the contrast level of the LCD.
OFF, Normal, RX Hold or Hold
Selects the call sign display option when receiving
a call.
OFF or ON
Selects whether or not to display the indicator when
the position data is included in the signal received in
the DV mode.
OFF, ON (Main/Sub) or
Selects whether or not to display the caller’s posiON (Main Only)
tion data in a dialog when the data is included in the
signal received in the DV mode.
5sec, 10sec, 15sec, 30sec, Hold
Sets the RX position data display time period.
OFF or ON
Selects whether or not to display the caller’s position
data in a dialog when the data is included in the Auto
Reply signal.
OFF, Your Call Sign or My Call Selects whether or not to display My or Your call sign
Sign
while transmitting.
Slow or Fast
Selects the scrolling speed of the message, call sign,
or other text.
OFF or ON
Selects whether or not to display the opening message at power ON.
OFF or ON
Selects whether or not to display the voltage of the
battery or external DC power source at power ON.
MENU SCREEN
ddd°mm.mm', ddd°mm'ss"
m, ft/ml
km/h, mph or knots
ç, ƒ
hPa, mb, mmHg, inHg
mm, inch
m/s, mph, knots
English or Japanese
System Language
English or Japanese
Sounds
Beep Level
Key-Touch Beep
Sets the Sound options.
0~9
OFF or ON
Home CH Beep
Band Edge Beep
Scan Stop Beep
Standby Beep
OFF or ON
OFF or ON
OFF or ON
OFF, ON or ON (to me:High Tone)
Sub Band Mute
OFF, Mute, Beep or Mute & Beep
Scope AF Output
OFF or ON
Selects position format to display the position.
Selects units to display the distance and altitude.
Selects units to display the speed.
Selects units to display the temperature.
Selects units to display the barometric pressure.
Selects units to display the rainfall.
Selects units to display the wind speed.
Selects the display language in the DR screen or
Menu mode. When “English” is selected in System
Language, this setting will disappear.
Selects English or Japanese as the system language
of the transceiver.
Sets the beep output level.
Turns the confirmation beep tones when key is
pushed, ON or OFF.
Turns the Home CH Beep ON or OFF.
Turns the Band edge beep ON or OFF.
Turns the scan stop beep ON or OFF.
Turns the standby beep function in the DV mode ON
or OFF.
Selects to mute the SUB band audio signal while
receiving on the MAIN band, and/or sound a beep
when a signal disappears on the SUB band.
Selects the audio output option during a sweep.
MENU SCREEN
Latitude/Longitude
Altitude/Distance
Speed
Temperature
Barometric
Rainfall
Wind Speed
Display Language
74
7
MENU SCREEN
■ Menu items and Default settings (Continued)
Time Set
Date/Time
DATE
TIME
GPS Time Correct
Sets the Time options.
2000/01/01~2099/12/31
0:00~23:59
OFF or Auto
UTC Offset
–14:00~±0:00~+14:00
Auto Power OFF
OFF, 30min,
120min
SD Card*
Load Setting
File selection
Save Setting
<>
File selection
Import/Export
Import
Export
CSV Format
Separator/Decimal
Date
60min,
90min
Sets the current date.
Sets the current time.
Sets to automatically correct the time using a GPS
signal.
Enters the time difference between UTC and the local time.
or Turns the Auto power OFF function ON or OFF.
Sets the SD card options.
ALL, Except My Station,
Repeater List Only
Loads the settings file to the transceiver.
Saves the settings as a new file.
Saves the settings in a selected file.
Your Call Sign, Repeater List or
GPS Memory
Your Call Sign, Repeater List or
GPS Memory
Selects to import the repeater list, UR call sign or
GPS memory data in the CSV format file.
Selects to export the repeater list, UR call sign or
GPS memory data in the CSV format file.
Sep [,] Dec [.], Sep [;] Dec [.] or
Sep [;] Dec [,]
yyyy/mm/dd, mm/dd/yyyy or
dd/mm/yyyy
Selects the separator and the decimal character for
the CSV format.
Selects the date format.
* Be sure to insert the SD card into the transceiver before selecting these items.
75
MENU SCREEN
Displays the free space and remaining recording
time of the card.
Formats the card.
Unmounts the card.
Format
Unmount
Bluetooth
Bluetooth
Auto Connect
Sets the BluetoothÂŽ options.
OFF or ON
OFF or ON
Pairing/Connect
Device Search
Search Headset
Search Data Device
Pairing list
<>
Headset Set
AF Output
Turns the BluetoothÂŽ function ON or OFF.
Selects whether or not to automatically connect
to the paired BluetoothÂŽ device when its device is
turned ON.
Selects to pair or connect to the BluetoothÂŽ device.
Selects to search for the BluetoothÂŽ headset.
Selects to search for the BluetoothÂŽ data device.
Selects to display the paired device.
Selects to accept the connection request from the
BluetoothÂŽ device.
Headset Only or Headset & Speak- Selects the AF output option for when you use the
er
BluetoothÂŽ headset.
VOX
VOX
OFF or ON
VOX Level
OFF, 1~5~10
Turn the VOX function ON or OFF for when you use
the BluetoothÂŽ headset.
Set the MIC Gain level.
• When the microphone input level is higher than this
set value, the transceiver starts to transmit, and the
input level is lower than this set value, returns to
receive.
MENU SCREEN
SD Card Info
76
7
MENU SCREEN
■ Menu items and Default settings (Continued)
VOX Delay
VOX Time-Out Timer
Icom Headset
Power Save
Out-Touch PTT
PTT Beep
Custom Key Beep
Custom Key
Data Device Set
Serialport Function
Bluetooth Device Information
Reset Bluetooth Device
77
0.5sec, 1.0sec, 1.5sec, 2.0sec,
2.5sec or 3.0sec
Sets the VOX Delay time for the transmitter stays ON
after you stop speaking before the VOX switches to
receive.
OFF, 1min, 2min, 3min, 4min, 5min, Sets the VOX Time-Out Timer to prevent an acciden10min or 15min
tal prolonged transmission.
Sets to use the optional Icom BluetoothÂŽ headset
(VS-3).
OFF or ON
Sets the Power save function to prolong the headset
battery.
OFF or ON
Sets the One-Touch PTT function to toggle between
transmission and reception by pushing [PTT].
OFF or ON
Sets to sound a beep when you push [PTT].
OFF or ON
Sets to sound a beep when you push the custom key
([PLAY]/[FWD]/[RWD]).
[PLAY]:---, [FWD]:UP,
Selects the key function of the custom key ([PLAY]/
[RWD]: DOWN
[FWD]/[RWD]).
Sets the data device options.
CI-V (Echo Back OFF), CI-V(Echo Selects to transmit or receive the CI-V command or
Back ON) or DV Data
the DV data.
Shows the optional UT-133 BluetoothÂŽ UNIT information.
Selects to reset the optional UT-133 BluetoothÂŽ UNIT.
MENU SCREEN
Repeater Mode
<>
Hang Up Time
Touch Screen Calibration
Reset
Partial Reset
All Reset
Sets other options.
Shows the battery voltage.
Shows the transceiver’s firmware version number.
Reads or writes the CS-5100 data from or to the PC,
and/or to receive data from a Master transceiver.
OFF or ON
Selects the Repeater mode.
Selects the hangup time to cancel the transmission.
Adjusts the touch screen.
Returns all settings to their defaults, without clearing
the memory contents, call sign memories or repeater
lists.
Clears all programming and memories, and return all
settings to their defaults.
MENU SCREEN
Others
Information
Voltage
Version
Clone
Clone Mode
78
8
INSTALLATION AND CONNECTIONS
■ Connect controller to main unit
■ DC power supply connection
Connect the controller to the main unit with the supplied control cable.
• The following longer cable may be required, depending on
the installation location.
Use a 13.8 V DC power supply with at least 20 A capacity.
Connect the black DC power cable to the (–) Negative terminal, and the red DC power cable to the (+) Positive terminal.
OPC-440 MIC EXTENSION CABLE:
5 m (16.4 ft)
OPC-647 MIC EXTENSION CABLE:
2.5 m (8.2 ft)
OPC-1156 CONTROLLER EXTENSION CABLE: 3.5 m (11.4 ft)
SP-35 EXTERNAL SPEAKER:
2 m (6.5 ft)
SP-35L EXTERNAL SPEAKER:
3 m (9.8 ft)
SP-30 EXTERNAL SPEAKER:
2.8 m (9.1 ft)
Controller
R WARNING! NEVER remove the fuse holders from the
DC power cable.
• CONNECTING TO A DC POWER SUPPLY
Main unit
Main unit
6-pin connector
6-pin connector
■ Microphone connection
Plug in the microphone to the microphone connector on the
main unit as shown in the illustration below.
Controller
DC power
supply 13.8 V
to an
AC outlet
−
⊕
Microphone
Main unit
⊕ Red − Black
See page 83 for a car battery connection.
79
Fuses
20 A
8
■ Remote installation
D When installing into your vehicle
You can install the controller on the dashboard or the console
of your vehicle with optional MBA-2 CONTROLLER BRACKET
and the MBF-1 MOUNTING BASE. (p. ??)
q Attach the MBF-1 on the dashboard or the console.
• See the MBF-1 instruction manual for details.
e Slide the MBA-2’s guide down over the MBF-1’s locking
head, as shown below.
• Be sure the locking head fits into the slot at the top of the
guide.
r Tighten the lock knob to securely attach the Controller.
t Adjust the viewing angle of the remote controller, then
tighten the adjustment knob.
Guide
Locking head
(MBF-1)
Suction pad
Base lever
MBF-1
w Attach the MBA-2 to the controller’s rear panel with the
supplied two screws as shown below.
INSTALLATION AND CONNECTIONS
INSTALLATION AND CONNECTIONS
MBA-2
Lock knob
Adjustment knob
Magnet
Controller
bracket
Screw
MBA-2
80
8
INSTALLATION AND CONNECTIONS
■ Remote controller installation (Continued)
D When installing to a flat surface
You can install the controller on a flat surface with the optional
MBA-2 CONTROLLER BRACKET.
When attaching the bracket onto a wall, use a self-tapping
screw* (3 mm(d)).
*Purchase separately
Attach the magnet to the
Controller bracket
■ Installing in a vehicle
CAUTION: NEVER place the main unit or remote controller
where normal operation of the vehicle may be hindered or
where it could cause bodily injury.
CAUTION: NEVER place the main unit or remote controller
where air bag deployment may be obstructed.
DO NOT place the transceiver or remote controller where
hot or cold air blows directly onto it.
DO NOT place the transceiver or remote controller in direct
sunlight.
• Remote controller
installation
Screw
Controller
Magnet
Supplied with the MBA-2
When attaching the bracket
onto a wall
• Main unit
installation
Screw (3 mm(d))
Purchase separately
MBA-2
81
Controller
DC power cable
Main
unit
Controller
cable
Battery (12V)
8
■ Antenna installation
D About Coaxial cable
• Antenna location
For radio communications, the antenna is of critically important, along with output power and receiver sensitivity.
Select a well-matched 50 ˘ antenna and coaxial cable feedline. We recommend 1.5:1 or better Voltage Standing Wave
Ratio (VSWR) on your operating bands.
PL-259 CONNECTOR INSTALLATION EXAMPLE
To obtain maximum performance from the transceiver, select
a high-quality antenna and mount it in a good location.
➥ Connect the antenna to the antenna connector on the rear
panel of the main unit.
Coupling ring
30 mm
10 mm (Tin)
10 mm Tin
Antenna connector
Slide the coupling ring
down. Strip the cable
jacket and tin the
shield.
Strip the cable as
shown to the left. Tin
the center conductor.
INSTALLATION AND CONNECTIONS
INSTALLATION AND CONNECTIONS
1–2 mm
solder solder
Slide the connector
body on and solder it.
NOTE:
• Make the coaxial cable as short as possible.
• Be sure to seal antenna connection.
Screw the coupling
ring onto the connector
body.
30 mm (1.18 in) 10 mm (0.39 in) 1–2 mm (0.04–0.08 in)
82
8
INSTALLATION AND CONNECTIONS
■ Battery connection
RWARNING!
• NEVER remove the fuses from the cable connecting the
transceiver to a power source, such as a car battery.
• NEVER connect the transceiver directly to a 24 V battery.
The transceiver may not receive well on some frequencies
when installed in a hybrid vehicle, or any type of electric vehicle (fuel cell vehicle). This is because vehicle’s electric components such as the inverter system generate a lot of electric
noise.
RWARNING! (About DC power supply)
• Make sure DC power cable polarity is correct.
Red: Positive + terminal
Black: Negative – terminal
• DO NOT pull or bend the DC power cable.
• DO NOT use a cigarette lighter socket as a power source
when operating in a vehicle. The plug may cause voltage
drops and ignition noise may be superimposed onto transmit
or receive audio.
• Use a rubber grommet when passing the DC power cable
through a metal plate to prevent a short circuit.
Fuse
holders
⊕ Red
12 V
battery
83
− Black
CONNECTING A VEHICLE BATTERY
Grommet
NOTE: Use terminals for
the cable connections.
black
red
12 V
battery
INSTALLATION AND CONNECTIONS
INSTALLATION AND CONNECTIONS
Crimp
Solder
Supplied
DC power cable
84
9
MAINTENANCE
■ Resetting
Occasionally, erroneous information will be displayed, for example, when first applying power. This may be caused externally by static electricity or by other factors.
If this problem occurs, turn OFF power.
After waiting a few seconds, turn ON power again. If the problem is still there, perform a Partial reset or an All reset.
A Partial reset resets the operating settings to their default
values (VFO frequency, VFO settings, menu contents) without clearing the items below:
• Memory channel contents • Scan Edge contents
• Call channel contents
• Call sign memories
• Message data
• DTMF memory contents
• GPS Memory contents
• Repeater list
BE CAREFUL! An All reset clears all programming and
returns all settings to their factory defaults. See the Full
Instructions for details.
D Partial Reset
q Touch [MENU].
w Touch “Reset.”
(Manage Memory > Others > Reset)
• If the item is not displayed, touch [∫] or [√] one or more times to
select the page.
85
e Touch “Partial Reset.”
r Touch [YES].
• The transceiver displays "PARTIAL RESET," then the
partial reset is completed.
9
■ Power protect function
■ Fuse replacement
The transceiver is equipped with a protection circuit for the
power amplifier. The circuit activates when the transceiver
continuously transmit at high power, and then temperature
becomes extremely high.
In this case, the transceiver automatically displays “Over Voltage,” and then reduces transmit output power to low (approximately 5 W).
A fuse is installed in each fuse holder of the supplied DC
power cable. If a fuse blows, or the transceiver stops functioning, track down the source of the problem if possible, repair
it and then replace the damaged fuse with a new rated one
(FGB 20 A).
■ Spurious signals
Spurious signals may occur at some frequencies. These are
created in the internal circuit and does not indicate a transceiver malfunction.
You can avoid the spurious signals with the Heterodyne function. (p. ??-??)
R WARNING! NEVER remove the fuse holders from the
DC power cable. USE only the applicable fuses.
MAINTENANCE
MAINTENANCE
NOTE: Before replacing the fuse, be sure to disconnect the
DC cable from the power supply.
86
10
INFORMATION
COUNTRY CODE LIST
FCC INFORMATION
• ISO 3166-1
10
11
12
13
14
15
16
17
Country
Austria
Belgium
Bulgaria
Croatia
Czech Republic
Cyprus
Denmark
Estonia
Finland
France
Germany
Greece
Hungary
Iceland
Ireland
Italy
Latvia
Codes
AT
BE
BG
HR
CZ
CY
DK
EE
FI
FR
DE
GR
HU
IS
IE
IT
LV
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
Country
Liechtenstein
Lithuania
Luxembourg
Malta
Netherlands
Norway
Poland
Portugal
Romania
Slovakia
Slovenia
Spain
Sweden
Switzerland
Turkey
United Kingdom
Codes
LI
LT
LU
MT
NL
NO
PL
PT
RO
SK
SI
ES
SE
CH
TR
GB
• FOR CLASS B UNINTENTIONAL RADIATORS:
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician
for help.
CAUTION: Changes or modifications to this device, not expressly approved by Icom Inc., could void your authority to
operate this device under FCC regulations.
87
#02 EUR-01

■ AT
■ FI
■ IT
■ PL
■ GB
■ RO
#03 ITR-01
■ BE
■ FR
■ LV
■ PT
■ IS
■ TR
■ CY
■ DE
■ LT
■ SK
■ LI
■ HR
■ CZ ■ DK
■ GR ■ HU
■ LU ■ MT
■ SI ■ ES
■ NO ■ CH
■ EE
■ IE
■ NL
■ SE
■ BG

■ AT
■ FI
■ IT
■ PL
■ GB
■ RO
■ BE
■ FR
■ LV
■ PT
■ IS
■ TR
■ CY
■ DE
■ LT
■ SK
■ LI
■ HR
■ CZ ■ DK
■ GR ■ HU
■ LU ■ MT
■ SI ■ ES
■ NO ■ CH
■ EE
■ IE
■ NL
■ SE
■ BG
A-7115D-2EX
Printed in Japan
Š 2014 Icom Inc.
Printed on recycled paper with soy ink.
1-1-32 Kamiminami, Hirano-ku, Osaka 547-0003, Japan
INSTRUCTIONS
Bluetooth UNIT
ÂŽ
UT-133
Thank you for purchasing the UT-133 BluetoothÂŽ UNIT.
Installing the UT-133 in a transceiver allows you to
use a variety of BluetoothÂŽ devices.
Please read this instructions carefully and completely before installing the UT-133.
About the UT-133
Precautions
The UT-133 is a BluetoothÂŽ unit to be installed in a transceiver to communicate with other BluetoothÂŽ devices.
Please refer to the transceiver’s instruction manual for details regarding installation and use of the UT-133 with the
transceiver.
The BluetoothÂŽ communication range may vary, depending
on the environment in which the device operates. Microwave ovens or wireless LAN may cause an interference.
In that case, stop using those devices or move away the
BluetoothÂŽ device from the other devices.
This BluetoothÂŽ device has a range of use. If the communication is unstable, use the device within the range.
UT-133
DO NOT put anything on top of the unit, before installing.
DO NOT drop, impact or vibrate the unit, before installing.
BluetoothÂŽ
Transceiver
VS-3
AndroidÂŽ device
(third party)
This may damage to the unit.
You may not be able to use some Bluetooth® device’s function, even if the unit is installed.
Electromagnetic Interference
Radio operator warnings
When you use a BluetoothÂŽ device, pay attention to following:
BluetoothÂŽ devices operate on the 2.4 GHz band.
The 2.4 GHz band is also used by other devices, such as
wireless LAN products, microwave ovens, RFID systems,
amateur radio stations, and so on.
When using a transceiver with the UT-133 installed and
turned ON near such devices, interference may occur, causing a decrease in communication speed, and an unstable
connection.
In such cases, use the transceiver with the UT-133 away
from the other devices, or stop using those devices.
s $O NOT USE A TRANSCEIVER WITH THE 54  INSTALLED AND
turned ON near medical equipment, or near a person who
has a pacemaker. Radio waves from the transceiver may
cause interference, or endanger their life.
s $O NOT USE A TRANSCEIVER WITH THE 54  INSTALLED AND
turned ON near microwave ovens. Interference may occur.
s $O NOT MAKE ANY CHANGES OR MODIlCATIONS TO THE UNIT
Specications
s "LUETOOTHÂŽ version: BluetoothÂŽ Version 3.0
s 4RANSMISSION /UTPUT #LASS 
s 3UPPORTED PROlLES (&0 (30 300
s 4HE MAXIMUM NUMBER OF PAIRED "LUETOOTHÂŽ devices:
8 devices*
*You can pair with up to 8 headsets and
data devices. The 8 paired devices cannot be all headsets or all data devices.
s $IMENSIONS
Icom, Icom Inc. and the Icom logo are registered trademarks of Icom
Incorporated (Japan) in Japan, the United States, the United Kingdom, Germany, France, Spain, Russia and/or other countries.
The BluetoothÂŽ work mark and logos are registered trademarks
owned by Bluetooth SIG, Inc. and any use of such marks by Icom
inc. is under license.
All other products or brands are registered trademarks or trademarks of their respective holders.
s 7EIGHT
s $EVICE .AME
s 0ASSKEY
7 X ( X $ MM
7 X ( X $ INCH
 G  OZ APPROXIMATELY
)COM "4  DEFAULT VALUE
 FOUR ZEROS
4HE SPECIlCATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE OR
obligations.
FCC and IC information
s &/2 #,!33 " 5.).4%.4)/.!, 2!$)!4/23
This equipment has been tested and found to comply with
THE LIMITS FOR A #LASS " DIGITAL DEVICE PURSUANT TO PART  OF
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
s 2EORIENT OR RELOCATE THE RECEIVING ANTENNA
s )NCREASE THE SEPARATION BETWEEN THE EQUIPMENT AND REceiver.
s #ONNECT THE EQUIPMENT INTO AN OUTLET ON A CIRCUIT DIFFERent from that to which the receiver is connected.
s #ONSULT THE DEALER OR AN EXPERIENCED RADIO46 TECHNIcian for help.
#!54)/. #HANGES OR MODIlCATIONS TO THIS DEVICE NOT EXpressly approved by Icom Inc., could void your authority to
operate this device under FCC regulations.
4HIS DEVICE COMPLIES WITH 0ART  OF &## AND )NDUSTRY #ANADA LICENCE EXEMPT 233 STANDARDS  /PERATION IS SUBJECT TO
the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation
of the device.
This transmitter must not be co-located or operated in conJUNCTION WITH ANY OTHER ANTENNA OR TRANSMITTER
CAN ICES-3 (B)
s &OR -OBILE 5SE
4HIS EQUIPMENT COMPLIES WITH &##)# RADIATION EXPOSURE
limits set forth for an uncontrolled environment and meets
THE &## RADIO FREQUENCY 2& %XPOSURE 'UIDELINES AND
233  OF THE )# RADIO FREQUENCY 2& %XPOSURE RULES 4HIS
equipment has very low levels of RF energy that it deemed
TO COMPLY WITHOUT MAXIMUM PERMISSIVE EXPOSURE EVALUATION
(MPE).
#ET ÂŁQUIPEMENT EST CONFORME AUX LIMITES DEXPOSITION AUX
rayonnements ĂŠnoncĂŠes pour un environnement non contrĂ´lĂŠ
ET RESPECTE LES RÞGLES LES RADIO£LECTRIQUES 2& DE LA &##
lignes directrices d’EXPOSITION ET DEXPOSITION AUX FR£QUENCes radioélectriques (RF) CNR-102 de l’IC. Cet équipement
£MET UNE £NERGIE 2& TRÞS FAIBLE QUI EST CONSID£R£E CONFORME
SANS ÂŁVALUATION DE LEXPOSITION MAXIMALE AUTORISÂŁE
s &OR 0ORTABLE 5SE
4HIS EQUIPMENT COMPLIES WITH &##)# RADIATION EXPOSURE
limits set forth for an uncontrolled environment and meets
THE &## RADIO FREQUENCY 2& %XPOSURE 'UIDELINES AND
233  OF THE )# RADIO FREQUENCY 2& %XPOSURE RULES 4HIS
equipment has very low levels of RF energy that are deemed
TO COMPLY WITHOUT TESTING OF SPECIlC ABSORPTION RATIO 3!2 
#ET ÂŁQUIPEMENT EST CONFORME AUX LIMITES DEXPOSITION AUX
rayonnements ĂŠnoncĂŠes pour un environnement non contrĂ´lĂŠ
ET RESPECTE LES RÞGLES LES RADIO£LECTRIQUES 2& DE LA &##
lignes directrices d’EXPOSITION ET DEXPOSITION AUX FR£QUENCES
radioélectriques (RF) CNR-102 de l’IC. Cet équipement émet
UNE £NERGIE 2& TRÞS FAIBLE QUI EST CONSID£R£E CONFORME SANS
ÂŁVALUATION DU DÂŁBIT DABSORPTION SPÂŁCIlQUE $!3 
After installing the UT-133, place the FCC/IC ID label on the
outside of the transceiver.
,E PR£SENT APPAREIL EST CONFORME AUX LA PARTIE  DES RÞGLES
DE LA &## ET #.2 Dg)NDUSTRIE #ANADA APPLICABLES AUX APPAREILS RADIO EXEMPTS DE LICENCE ,gEXPLOITATION EST AUTORISÂŁE AUX
DEUX CONDITIONS SUIVANTES  LgAPPAREIL NE DOIT PAS PRODUIRE
de brouillage, et (2) l'utilisateur de l'appareil doit accepter
tout brouillage radioĂŠlectrique subi, mĂŞme si le brouillage est
susceptible d'en compromettre le fonctionnement.
Cet ĂŠmetteur ne doit pas ĂŞtre co-localisĂŠ ou fonctionner en
CONJONCTION AVEC UNE AUTRE ANTENNE OU ÂŁMETTEUR
NMB-3 (B)
About CE
Versions of the UT-133 which display the “CE”
symbol on the serial number label, comply with
the essential requirements of the Radio and
Telecommunications Terminal Equipment DiRECTIVE %# AND THE RESTRICTION OF THE
use of certain hazardous substances in electriCAL AND ELECTRONIC EQUIPMENT $IRECTIVE 
EU.
You can get the DOC (Declaration Of Conformity) from your
nearest Icom dealer. See the Icom website for details of your
nearest dealer.
HTTPWWWICOMCOJPWORLD
   +AMIMINAMI (IRANO KU /SAKA   *APAN
A-7142W-1EX
Š 2014 Icom Inc.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Create Date                     : 2014:02:05 15:59:01+09:00
Creator                         : Adobe InDesign CS3_J (5.0.4)
Modify Date                     : 2014:03:25 11:45:42-04:00
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Instance ID                     : uuid:b50fd05c-1a33-490d-b964-a943ba63fff7
Document ID                     : adobe:docid:indd:64945079-8e30-11e3-8343-aed7d8ba8c7a
Rendition Class                 : proof:pdf
Derived From Instance ID        : 98c8b615-8e2a-11e3-8343-aed7d8ba8c7a
Derived From Document ID        : adobe:docid:indd:3d058b96-8983-11e3-bd1c-836e415a6e51
Manifest Link Form              : ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream
Manifest Placed X Resolution    : 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00
Manifest Placed Y Resolution    : 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00
Manifest Placed Resolution Unit : Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches
Manifest Reference Instance ID  : uuid:327A51CBE288E3118402DA941AF1EDC9, uuid:247D7D866889E311AD89ECAB49829DCF, uuid:DF000141873FE311A093C02BAA0B9F36, uuid:79291523BB88E3119B02835FE907A2F1, uuid:74B3CCEB5267DC11A9FBEE8A536F9759, uuid:9053E82F6053E311AC4A88EA33E50474, uuid:14CF83567455E311B86294388A644E70, uuid:D4DD3371FD4FE31187C481AA0D00CC27, uuid:DF000141873FE311A093C02BAA0B9F36, uuid:79291523BB88E3119B02835FE907A2F1, uuid:DF000141873FE311A093C02BAA0B9F36, uuid:DF000141873FE311A093C02BAA0B9F36, uuid:DF000141873FE311A093C02BAA0B9F36, uuid:79291523BB88E3119B02835FE907A2F1, uuid:DF000141873FE311A093C02BAA0B9F36, uuid:DF000141873FE311A093C02BAA0B9F36, uuid:79291523BB88E3119B02835FE907A2F1, uuid:DF000141873FE311A093C02BAA0B9F36, uuid:DF000141873FE311A093C02BAA0B9F36, uuid:79291523BB88E3119B02835FE907A2F1, uuid:DF000141873FE311A093C02BAA0B9F36, uuid:79291523BB88E3119B02835FE907A2F1, uuid:DF000141873FE311A093C02BAA0B9F36, uuid:79291523BB88E3119B02835FE907A2F1, uuid:79291523BB88E3119B02835FE907A2F1, uuid:DF000141873FE311A093C02BAA0B9F36, uuid:79291523BB88E3119B02835FE907A2F1, uuid:DF000141873FE311A093C02BAA0B9F36, uuid:DF000141873FE311A093C02BAA0B9F36, uuid:DF000141873FE311A093C02BAA0B9F36, uuid:DF000141873FE311A093C02BAA0B9F36, uuid:ABF6EF98213AE311A54DB3CBE5540709, uuid:012525F6213AE311A54DB3CBE5540709, uuid:FE652023D583E311BBB89CDF1BB73C9E, uuid:FDD7BA354C48E3119357CAC0A879F923, uuid:34CC28501684E3118BC2A9F6E631F967, uuid:1494907914FBE1118FAC8654F8D323D5, uuid:B1AF785314FBE1118FAC8654F8D323D5, uuid:35CC28501684E3118BC2A9F6E631F967, uuid:AACB7B2B19FBE1118FAC8654F8D323D5, uuid:AACB7B2B19FBE1118FAC8654F8D323D5, uuid:5BD4039AAF28E211BC0483AFC75221C6, uuid:FAD7BA354C48E3119357CAC0A879F923, uuid:FCD7BA354C48E3119357CAC0A879F923, uuid:63B8D15D2E61E311A382DF7ECC28A255, uuid:68B8D15D2E61E311A382DF7ECC28A255, uuid:C53C8D740383E311BC81CD6B224BD4BB, uuid:74B3CCEB5267DC11A9FBEE8A536F9759, uuid:68B8D15D2E61E311A382DF7ECC28A255, uuid:C53C8D740383E311BC81CD6B224BD4BB, uuid:C53C8D740383E311BC81CD6B224BD4BB, uuid:B0069BCBFCFDE111857287D59F37AA0A, uuid:B0069BCBFCFDE111857287D59F37AA0A, uuid:DABEF369393AE311B95E8C29697E800D, uuid:B0069BCBFCFDE111857287D59F37AA0A, uuid:DABEF369393AE311B95E8C29697E800D, uuid:14CF83567455E311B86294388A644E70, uuid:14CF83567455E311B86294388A644E70, uuid:14CF83567455E311B86294388A644E70, uuid:9053E82F6053E311AC4A88EA33E50474, uuid:9053E82F6053E311AC4A88EA33E50474, uuid:9053E82F6053E311AC4A88EA33E50474, uuid:9053E82F6053E311AC4A88EA33E50474, uuid:9053E82F6053E311AC4A88EA33E50474, uuid:9053E82F6053E311AC4A88EA33E50474, uuid:9053E82F6053E311AC4A88EA33E50474, uuid:9053E82F6053E311AC4A88EA33E50474, uuid:9053E82F6053E311AC4A88EA33E50474, uuid:9053E82F6053E311AC4A88EA33E50474, uuid:9053E82F6053E311AC4A88EA33E50474, uuid:EE7E618AE7C3E011BC89D3911538BAD8, uuid:DABEF369393AE311B95E8C29697E800D, uuid:74B3CCEB5267DC11A9FBEE8A536F9759, uuid:74B3CCEB5267DC11A9FBEE8A536F9759, uuid:9053E82F6053E311AC4A88EA33E50474, uuid:DABEF369393AE311B95E8C29697E800D, uuid:B0069BCBFCFDE111857287D59F37AA0A, uuid:9053E82F6053E311AC4A88EA33E50474, uuid:9053E82F6053E311AC4A88EA33E50474, uuid:B0069BCBFCFDE111857287D59F37AA0A, uuid:74B3CCEB5267DC11A9FBEE8A536F9759, uuid:B0069BCBFCFDE111857287D59F37AA0A, uuid:B0069BCBFCFDE111857287D59F37AA0A, uuid:DABEF369393AE311B95E8C29697E800D, uuid:B0069BCBFCFDE111857287D59F37AA0A, uuid:14CF83567455E311B86294388A644E70, uuid:9053E82F6053E311AC4A88EA33E50474, uuid:9053E82F6053E311AC4A88EA33E50474, uuid:9053E82F6053E311AC4A88EA33E50474, uuid:9053E82F6053E311AC4A88EA33E50474, uuid:9667DABAD087E311A4B8C427C66D3E03, uuid:2B5001EAFF50E311A0CDE9E1CDA3D9A8, uuid:AFE8B013EE86E3119672FD19CFB18736, uuid:570DCF73777DE3118E9C9DEB1B13D863, uuid:570DCF73777DE3118E9C9DEB1B13D863, uuid:076281A2EE87E311A4B8C427C66D3E03, uuid:9053E82F6053E311AC4A88EA33E50474, uuid:14CF83567455E311B86294388A644E70, uuid:9053E82F6053E311AC4A88EA33E50474, uuid:9053E82F6053E311AC4A88EA33E50474, uuid:9053E82F6053E311AC4A88EA33E50474, uuid:74B3CCEB5267DC11A9FBEE8A536F9759, uuid:9053E82F6053E311AC4A88EA33E50474, uuid:9053E82F6053E311AC4A88EA33E50474, uuid:677DAF4CEA3CE211A487AE59D94CFCDB, uuid:9053E82F6053E311AC4A88EA33E50474, uuid:9053E82F6053E311AC4A88EA33E50474, uuid:B6F09EDF9540DC11A88CE9F1AC8B692A, uuid:9053E82F6053E311AC4A88EA33E50474, uuid:9053E82F6053E311AC4A88EA33E50474, uuid:9053E82F6053E311AC4A88EA33E50474, uuid:9053E82F6053E311AC4A88EA33E50474, uuid:B6F09EDF9540DC11A88CE9F1AC8B692A, uuid:9053E82F6053E311AC4A88EA33E50474, uuid:9053E82F6053E311AC4A88EA33E50474, uuid:9053E82F6053E311AC4A88EA33E50474, uuid:9053E82F6053E311AC4A88EA33E50474, uuid:B6F09EDF9540DC11A88CE9F1AC8B692A, uuid:9053E82F6053E311AC4A88EA33E50474, uuid:9053E82F6053E311AC4A88EA33E50474, uuid:B6F09EDF9540DC11A88CE9F1AC8B692A, uuid:9053E82F6053E311AC4A88EA33E50474, uuid:9053E82F6053E311AC4A88EA33E50474, uuid:B6F09EDF9540DC11A88CE9F1AC8B692A, uuid:9053E82F6053E311AC4A88EA33E50474, uuid:9053E82F6053E311AC4A88EA33E50474, uuid:14CF83567455E311B86294388A644E70, uuid:B6F09EDF9540DC11A88CE9F1AC8B692A, uuid:9053E82F6053E311AC4A88EA33E50474, uuid:9053E82F6053E311AC4A88EA33E50474, uuid:9053E82F6053E311AC4A88EA33E50474, uuid:9053E82F6053E311AC4A88EA33E50474, uuid:9053E82F6053E311AC4A88EA33E50474, uuid:9053E82F6053E311AC4A88EA33E50474, uuid:9053E82F6053E311AC4A88EA33E50474, uuid:9053E82F6053E311AC4A88EA33E50474, uuid:9053E82F6053E311AC4A88EA33E50474, uuid:9053E82F6053E311AC4A88EA33E50474, uuid:9053E82F6053E311AC4A88EA33E50474, uuid:9053E82F6053E311AC4A88EA33E50474, uuid:9053E82F6053E311AC4A88EA33E50474, uuid:9053E82F6053E311AC4A88EA33E50474, uuid:9053E82F6053E311AC4A88EA33E50474, uuid:9053E82F6053E311AC4A88EA33E50474, uuid:9053E82F6053E311AC4A88EA33E50474, uuid:9053E82F6053E311AC4A88EA33E50474, uuid:9053E82F6053E311AC4A88EA33E50474, uuid:9053E82F6053E311AC4A88EA33E50474, uuid:9053E82F6053E311AC4A88EA33E50474, uuid:9053E82F6053E311AC4A88EA33E50474, uuid:B6F09EDF9540DC11A88CE9F1AC8B692A, uuid:76291523BB88E3119B02835FE907A2F1, uuid:9053E82F6053E311AC4A88EA33E50474, uuid:9053E82F6053E311AC4A88EA33E50474, uuid:9053E82F6053E311AC4A88EA33E50474, uuid:9053E82F6053E311AC4A88EA33E50474, uuid:9053E82F6053E311AC4A88EA33E50474, uuid:9053E82F6053E311AC4A88EA33E50474, uuid:9053E82F6053E311AC4A88EA33E50474, uuid:9053E82F6053E311AC4A88EA33E50474, uuid:9053E82F6053E311AC4A88EA33E50474, uuid:9053E82F6053E311AC4A88EA33E50474, uuid:9053E82F6053E311AC4A88EA33E50474, uuid:9053E82F6053E311AC4A88EA33E50474, uuid:9053E82F6053E311AC4A88EA33E50474, uuid:9053E82F6053E311AC4A88EA33E50474, uuid:9053E82F6053E311AC4A88EA33E50474, uuid:9053E82F6053E311AC4A88EA33E50474, uuid:9053E82F6053E311AC4A88EA33E50474, uuid:37480C2CACAFDD118384B74BDB748416, uuid:586953D19879E3118704C25A527AF4FF, uuid:596953D19879E3118704C25A527AF4FF, uuid:9053E82F6053E311AC4A88EA33E50474, uuid:9053E82F6053E311AC4A88EA33E50474, uuid:9053E82F6053E311AC4A88EA33E50474, uuid:9053E82F6053E311AC4A88EA33E50474, uuid:9053E82F6053E311AC4A88EA33E50474, uuid:AACB7B2B19FBE1118FAC8654F8D323D5, uuid:AACB7B2B19FBE1118FAC8654F8D323D5, uuid:5BD4039AAF28E211BC0483AFC75221C6, uuid:BE2DC50BE75BE311BFF0AF703AD76899, uuid:AACB7B2B19FBE1118FAC8654F8D323D5, uuid:9053E82F6053E311AC4A88EA33E50474, uuid:9053E82F6053E311AC4A88EA33E50474, uuid:1494907914FBE1118FAC8654F8D323D5, uuid:B1AF785314FBE1118FAC8654F8D323D5, uuid:9053E82F6053E311AC4A88EA33E50474, uuid:9053E82F6053E311AC4A88EA33E50474, uuid:9053E82F6053E311AC4A88EA33E50474, uuid:C32DC50BE75BE311BFF0AF703AD76899, uuid:9053E82F6053E311AC4A88EA33E50474, uuid:9053E82F6053E311AC4A88EA33E50474, uuid:213DC3D605DAE011BD878C8D0398E4E6, uuid:193DC3D605DAE011BD878C8D0398E4E6, uuid:79995B9105DAE011BD878C8D0398E4E6, uuid:CF11240F06DAE011BD878C8D0398E4E6, uuid:79995B9105DAE011BD878C8D0398E4E6, uuid:9053E82F6053E311AC4A88EA33E50474, uuid:9053E82F6053E311AC4A88EA33E50474, uuid:74B3CCEB5267DC11A9FBEE8A536F9759, uuid:9053E82F6053E311AC4A88EA33E50474, uuid:9053E82F6053E311AC4A88EA33E50474, uuid:9053E82F6053E311AC4A88EA33E50474, uuid:74B3CCEB5267DC11A9FBEE8A536F9759, uuid:C010570B3D87E311B30EB9105D752C5C, uuid:BF10570B3D87E311B30EB9105D752C5C, uuid:2A7D7D866889E311AD89ECAB49829DCF, uuid:74B3CCEB5267DC11A9FBEE8A536F9759, uuid:4BDAB068344FE21190D8ABEB2E88F582, uuid:257D7D866889E311AD89ECAB49829DCF, uuid:A5189AA69B8CE311A4F1FF77E4399C0C, uuid:277D7D866889E311AD89ECAB49829DCF, uuid:05708F444087E311B30EB9105D752C5C, uuid:09708F444087E311B30EB9105D752C5C, uuid:0B708F444087E311B30EB9105D752C5C, uuid:B858E94874EBDD11AAFDF7E967F05425, uuid:D9DAFD905E35E311AF73ED0D610A7ECA, uuid:74B3CCEB5267DC11A9FBEE8A536F9759, uuid:297D7D866889E311AD89ECAB49829DCF, uuid:2B7D7D866889E311AD89ECAB49829DCF, uuid:A1793FEA3887E311B30EB9105D752C5C, uuid:74B3CCEB5267DC11A9FBEE8A536F9759, uuid:9053E82F6053E311AC4A88EA33E50474, uuid:9053E82F6053E311AC4A88EA33E50474, uuid:9053E82F6053E311AC4A88EA33E50474, uuid:F168476FD7CCDD11A5B8CED1E62EDBB0
Manifest Reference Document ID  : uuid:ECDE6DEBE188E3118402DA941AF1EDC9, uuid:B60B58976389E311AD89ECAB49829DCF, uuid:DB000141873FE311A093C02BAA0B9F36, uuid:77291523BB88E3119B02835FE907A2F1, uuid:CE6993CC4F67DC11A9FBEE8A536F9759, uuid:8C53E82F6053E311AC4A88EA33E50474, uuid:9153E82F6053E311AC4A88EA33E50474, uuid:21556529093AE311B95E8C29697E800D, uuid:DB000141873FE311A093C02BAA0B9F36, uuid:77291523BB88E3119B02835FE907A2F1, uuid:DB000141873FE311A093C02BAA0B9F36, uuid:DB000141873FE311A093C02BAA0B9F36, uuid:DB000141873FE311A093C02BAA0B9F36, uuid:77291523BB88E3119B02835FE907A2F1, uuid:DB000141873FE311A093C02BAA0B9F36, uuid:DB000141873FE311A093C02BAA0B9F36, uuid:77291523BB88E3119B02835FE907A2F1, uuid:DB000141873FE311A093C02BAA0B9F36, uuid:DB000141873FE311A093C02BAA0B9F36, uuid:77291523BB88E3119B02835FE907A2F1, uuid:DB000141873FE311A093C02BAA0B9F36, uuid:77291523BB88E3119B02835FE907A2F1, uuid:DB000141873FE311A093C02BAA0B9F36, uuid:77291523BB88E3119B02835FE907A2F1, uuid:77291523BB88E3119B02835FE907A2F1, uuid:DB000141873FE311A093C02BAA0B9F36, uuid:77291523BB88E3119B02835FE907A2F1, uuid:DB000141873FE311A093C02BAA0B9F36, uuid:DB000141873FE311A093C02BAA0B9F36, uuid:DB000141873FE311A093C02BAA0B9F36, uuid:DB000141873FE311A093C02BAA0B9F36, uuid:AAF6EF98213AE311A54DB3CBE5540709, uuid:002525F6213AE311A54DB3CBE5540709, uuid:2CCEBDA089D6DF118634B1A0BED97F7C, uuid:6A3528884732E311878BCC14D525F55B, uuid:30CC28501684E3118BC2A9F6E631F967, uuid:1394907914FBE1118FAC8654F8D323D5, uuid:B0AF785314FBE1118FAC8654F8D323D5, uuid:32CC28501684E3118BC2A9F6E631F967, uuid:A9CB7B2B19FBE1118FAC8654F8D323D5, uuid:A9CB7B2B19FBE1118FAC8654F8D323D5, uuid:5AD4039AAF28E211BC0483AFC75221C6, uuid:84F7654F5835E311AF73ED0D610A7ECA, uuid:D2DAFD905E35E311AF73ED0D610A7ECA, uuid:62B8D15D2E61E311A382DF7ECC28A255, uuid:67B8D15D2E61E311A382DF7ECC28A255, uuid:C43C8D740383E311BC81CD6B224BD4BB, uuid:CE6993CC4F67DC11A9FBEE8A536F9759, uuid:67B8D15D2E61E311A382DF7ECC28A255, uuid:C43C8D740383E311BC81CD6B224BD4BB, uuid:C43C8D740383E311BC81CD6B224BD4BB, uuid:AF069BCBFCFDE111857287D59F37AA0A, uuid:AF069BCBFCFDE111857287D59F37AA0A, uuid:25556529093AE311B95E8C29697E800D, uuid:AF069BCBFCFDE111857287D59F37AA0A, uuid:25556529093AE311B95E8C29697E800D, uuid:9153E82F6053E311AC4A88EA33E50474, uuid:9153E82F6053E311AC4A88EA33E50474, uuid:9153E82F6053E311AC4A88EA33E50474, uuid:8C53E82F6053E311AC4A88EA33E50474, uuid:8C53E82F6053E311AC4A88EA33E50474, uuid:8C53E82F6053E311AC4A88EA33E50474, uuid:8C53E82F6053E311AC4A88EA33E50474, uuid:8C53E82F6053E311AC4A88EA33E50474, uuid:8C53E82F6053E311AC4A88EA33E50474, uuid:8C53E82F6053E311AC4A88EA33E50474, uuid:8C53E82F6053E311AC4A88EA33E50474, uuid:8C53E82F6053E311AC4A88EA33E50474, uuid:8C53E82F6053E311AC4A88EA33E50474, uuid:8C53E82F6053E311AC4A88EA33E50474, uuid:ED7E618AE7C3E011BC89D3911538BAD8, uuid:25556529093AE311B95E8C29697E800D, uuid:CE6993CC4F67DC11A9FBEE8A536F9759, uuid:CE6993CC4F67DC11A9FBEE8A536F9759, uuid:8C53E82F6053E311AC4A88EA33E50474, uuid:25556529093AE311B95E8C29697E800D, uuid:AF069BCBFCFDE111857287D59F37AA0A, uuid:8C53E82F6053E311AC4A88EA33E50474, uuid:8C53E82F6053E311AC4A88EA33E50474, uuid:AF069BCBFCFDE111857287D59F37AA0A, uuid:CE6993CC4F67DC11A9FBEE8A536F9759, uuid:AF069BCBFCFDE111857287D59F37AA0A, uuid:AF069BCBFCFDE111857287D59F37AA0A, uuid:25556529093AE311B95E8C29697E800D, uuid:AF069BCBFCFDE111857287D59F37AA0A, uuid:9153E82F6053E311AC4A88EA33E50474, uuid:8C53E82F6053E311AC4A88EA33E50474, uuid:8C53E82F6053E311AC4A88EA33E50474, uuid:8C53E82F6053E311AC4A88EA33E50474, uuid:8C53E82F6053E311AC4A88EA33E50474, uuid:5E963562B576E311A7EBCF16DF871C21, uuid:285001EAFF50E311A0CDE9E1CDA3D9A8, uuid:916133240451E311A0CDE9E1CDA3D9A8, uuid:560DCF73777DE3118E9C9DEB1B13D863, uuid:560DCF73777DE3118E9C9DEB1B13D863, uuid:9967DABAD087E311A4B8C427C66D3E03, uuid:8C53E82F6053E311AC4A88EA33E50474, uuid:9153E82F6053E311AC4A88EA33E50474, uuid:8C53E82F6053E311AC4A88EA33E50474, uuid:8C53E82F6053E311AC4A88EA33E50474, uuid:8C53E82F6053E311AC4A88EA33E50474, uuid:CE6993CC4F67DC11A9FBEE8A536F9759, uuid:8C53E82F6053E311AC4A88EA33E50474, uuid:8C53E82F6053E311AC4A88EA33E50474, uuid:667DAF4CEA3CE211A487AE59D94CFCDB, uuid:8C53E82F6053E311AC4A88EA33E50474, uuid:8C53E82F6053E311AC4A88EA33E50474, uuid:B5F09EDF9540DC11A88CE9F1AC8B692A, uuid:8C53E82F6053E311AC4A88EA33E50474, uuid:8C53E82F6053E311AC4A88EA33E50474, uuid:8C53E82F6053E311AC4A88EA33E50474, uuid:8C53E82F6053E311AC4A88EA33E50474, uuid:B5F09EDF9540DC11A88CE9F1AC8B692A, uuid:8C53E82F6053E311AC4A88EA33E50474, uuid:8C53E82F6053E311AC4A88EA33E50474, uuid:8C53E82F6053E311AC4A88EA33E50474, uuid:8C53E82F6053E311AC4A88EA33E50474, uuid:B5F09EDF9540DC11A88CE9F1AC8B692A, uuid:8C53E82F6053E311AC4A88EA33E50474, uuid:8C53E82F6053E311AC4A88EA33E50474, uuid:B5F09EDF9540DC11A88CE9F1AC8B692A, uuid:8C53E82F6053E311AC4A88EA33E50474, uuid:8C53E82F6053E311AC4A88EA33E50474, uuid:B5F09EDF9540DC11A88CE9F1AC8B692A, uuid:8C53E82F6053E311AC4A88EA33E50474, uuid:8C53E82F6053E311AC4A88EA33E50474, uuid:9153E82F6053E311AC4A88EA33E50474, uuid:B5F09EDF9540DC11A88CE9F1AC8B692A, uuid:8C53E82F6053E311AC4A88EA33E50474, uuid:8C53E82F6053E311AC4A88EA33E50474, uuid:8C53E82F6053E311AC4A88EA33E50474, uuid:8C53E82F6053E311AC4A88EA33E50474, uuid:8C53E82F6053E311AC4A88EA33E50474, uuid:8C53E82F6053E311AC4A88EA33E50474, uuid:8C53E82F6053E311AC4A88EA33E50474, uuid:8C53E82F6053E311AC4A88EA33E50474, uuid:8C53E82F6053E311AC4A88EA33E50474, uuid:8C53E82F6053E311AC4A88EA33E50474, uuid:8C53E82F6053E311AC4A88EA33E50474, uuid:8C53E82F6053E311AC4A88EA33E50474, uuid:8C53E82F6053E311AC4A88EA33E50474, uuid:8C53E82F6053E311AC4A88EA33E50474, uuid:8C53E82F6053E311AC4A88EA33E50474, uuid:8C53E82F6053E311AC4A88EA33E50474, uuid:8C53E82F6053E311AC4A88EA33E50474, uuid:8C53E82F6053E311AC4A88EA33E50474, uuid:8C53E82F6053E311AC4A88EA33E50474, uuid:8C53E82F6053E311AC4A88EA33E50474, uuid:8C53E82F6053E311AC4A88EA33E50474, uuid:8C53E82F6053E311AC4A88EA33E50474, uuid:B5F09EDF9540DC11A88CE9F1AC8B692A, uuid:71291523BB88E3119B02835FE907A2F1, uuid:8C53E82F6053E311AC4A88EA33E50474, uuid:8C53E82F6053E311AC4A88EA33E50474, uuid:8C53E82F6053E311AC4A88EA33E50474, uuid:8C53E82F6053E311AC4A88EA33E50474, uuid:8C53E82F6053E311AC4A88EA33E50474, uuid:8C53E82F6053E311AC4A88EA33E50474, uuid:8C53E82F6053E311AC4A88EA33E50474, uuid:8C53E82F6053E311AC4A88EA33E50474, uuid:8C53E82F6053E311AC4A88EA33E50474, uuid:8C53E82F6053E311AC4A88EA33E50474, uuid:8C53E82F6053E311AC4A88EA33E50474, uuid:8C53E82F6053E311AC4A88EA33E50474, uuid:8C53E82F6053E311AC4A88EA33E50474, uuid:8C53E82F6053E311AC4A88EA33E50474, uuid:8C53E82F6053E311AC4A88EA33E50474, uuid:8C53E82F6053E311AC4A88EA33E50474, uuid:8C53E82F6053E311AC4A88EA33E50474, uuid:36480C2CACAFDD118384B74BDB748416, uuid:824E5F9D8056E31196D9EE91F33E1CBA, uuid:8B22C12D2B5BE311AD0DDCBB053F5F37, uuid:8C53E82F6053E311AC4A88EA33E50474, uuid:8C53E82F6053E311AC4A88EA33E50474, uuid:8C53E82F6053E311AC4A88EA33E50474, uuid:8C53E82F6053E311AC4A88EA33E50474, uuid:8C53E82F6053E311AC4A88EA33E50474, uuid:A9CB7B2B19FBE1118FAC8654F8D323D5, uuid:A9CB7B2B19FBE1118FAC8654F8D323D5, uuid:5AD4039AAF28E211BC0483AFC75221C6, uuid:BC2DC50BE75BE311BFF0AF703AD76899, uuid:A9CB7B2B19FBE1118FAC8654F8D323D5, uuid:8C53E82F6053E311AC4A88EA33E50474, uuid:8C53E82F6053E311AC4A88EA33E50474, uuid:1394907914FBE1118FAC8654F8D323D5, uuid:B0AF785314FBE1118FAC8654F8D323D5, uuid:8C53E82F6053E311AC4A88EA33E50474, uuid:8C53E82F6053E311AC4A88EA33E50474, uuid:8C53E82F6053E311AC4A88EA33E50474, uuid:BF2DC50BE75BE311BFF0AF703AD76899, uuid:8C53E82F6053E311AC4A88EA33E50474, uuid:8C53E82F6053E311AC4A88EA33E50474, uuid:203DC3D605DAE011BD878C8D0398E4E6, uuid:6BACB27305DAE011BD878C8D0398E4E6, uuid:73ACB27305DAE011BD878C8D0398E4E6, uuid:ED0BABE605DAE011BD878C8D0398E4E6, uuid:73ACB27305DAE011BD878C8D0398E4E6, uuid:8C53E82F6053E311AC4A88EA33E50474, uuid:8C53E82F6053E311AC4A88EA33E50474, uuid:CE6993CC4F67DC11A9FBEE8A536F9759, uuid:8C53E82F6053E311AC4A88EA33E50474, uuid:8C53E82F6053E311AC4A88EA33E50474, uuid:8C53E82F6053E311AC4A88EA33E50474, uuid:CE6993CC4F67DC11A9FBEE8A536F9759, uuid:DF245F276B35E311AF73ED0D610A7ECA, uuid:DF245F276B35E311AF73ED0D610A7ECA, uuid:5E01156F8A35E311B75FD7F2AF4248B2, uuid:CE6993CC4F67DC11A9FBEE8A536F9759, uuid:47DAB068344FE21190D8ABEB2E88F582, uuid:4CA028588B3CE3119EBCDA76222E5ACF, uuid:8A1CEDBC943CE3119EBCDA76222E5ACF, uuid:27F6058D8135E311B75FD7F2AF4248B2, uuid:27F6058D8135E311B75FD7F2AF4248B2, uuid:06708F444087E311B30EB9105D752C5C, uuid:E8FC15BF4225E211A4E0D4B1EFF2E6C9, uuid:383138A085AFDD11BD08D0067CF39A44, uuid:D2DAFD905E35E311AF73ED0D610A7ECA, uuid:CE6993CC4F67DC11A9FBEE8A536F9759, uuid:CC6CA9ED7BB1DF1190E1BC7D651EAB13, uuid:A4793FEA3887E311B30EB9105D752C5C, uuid:9E793FEA3887E311B30EB9105D752C5C, uuid:CE6993CC4F67DC11A9FBEE8A536F9759, uuid:8C53E82F6053E311AC4A88EA33E50474, uuid:8C53E82F6053E311AC4A88EA33E50474, uuid:8C53E82F6053E311AC4A88EA33E50474, uuid:F068476FD7CCDD11A5B8CED1E62EDBB0
Metadata Date                   : 2014:03:25 11:45:42-04:00
Creator Tool                    : Adobe InDesign CS3_J (5.0.4)
Thumbnail Format                : JPEG
Thumbnail Width                 : 256
Thumbnail Height                : 256
Thumbnail Image                 : (Binary data 7799 bytes, use -b option to extract)
Format                          : application/pdf
Producer                        : Adobe PDF Library 8.0
Trapped                         : False
Page Count                      : 103

EXIF Metadata provided by EXIF.tools