ICOM orporated 400900 Wireless 802.11 abgn/ac indoor AP User Manual

ICOM Incorporated Wireless 802.11 abgn/ac indoor AP Users Manual

Contents

Users Manual.pdf

– 4 –– 1 –A7493W-2EX Printed in Japan © 2018 Icom Inc.1-1-32 Kamiminami, Hirano-ku, Osaka 547-0003, JapanCONNECTION GUIDEWIRELESS ACCESS POINTAP-95MThank you for purchasing this Icom product. The AP-95M wireless access point is designed and built with Icom’s IP network technology. It complies with the “IEEE802.11ac Wave 2” standard, and is designed for dual band communications in the 5 GHz and 2.4 GHz bands.Read the “PRECAUTIONS” leaet rst, if you have not done so. DSupplied Accessories • Mounting bracket set • Precautions Guide • Connection Guide (This guide) • Power adapter ( The adapter type differs, depending on the access point version) DOther requirements • PC • LAN cableAbout this Connection Guide: This Connection Guide explains the basic operation of the AP-95M. Access our website to download the instruction manual. Icom website http://www.icom.co.jp/world/ NOTE: • Adobe® Acrobat Reader® is required on your PC in order to display the downloaded PDF instruction manual. • If your PC does not have Adobe® Acrobat Reader®, please download it from the Adobe® website. 1. System Requirements2. Panel description DAbout the indicators*1 When there is no wireless device to communicate with the AP-95M, or no wireless communication is performed while the Wireless Unit is enabled, the indicator turns OFF. The time when the indicator turns OFF differs, depending on the communication status.*2 While booting up, the [POWER] indicator lights green → blinks green → lights green. LAll indicators light while booting.Indicator 5 GHz 2.4 GHz LAN MODE POWER*2GreenLights More than 1 connection/WPS succeeded*1 LAN connected(1000BASE-T)[MODE] is held down for 1 second BootingBlinks Wireless operation isstanding by for DFS —LAN is communicating (1000BASE-T) WPS is running Booting/Updating rmwareOrangeLights — — LAN connected(10BASE-T/100BASE-TX)A rmware update is ready (Online update) —Blinks — — LAN is communicating(10BASE-T/100BASE-TX)WPS failed(Blinks for 30 seconds) —OFF Other than the aboveIcom, Icom Inc. and the Icom logo are registered trademarks of Icom Incorporated (Japan) in Japan, the United States, the United Kingdom, Germany, France, Spain, Russia, Australia, New Zealand, and/or other countries.Microsoft, Windows and Windows Server are registered trademarks of Microsoft Corporation in the United States and/or other countries.Adobe and Adobe Reader are registered trademarks of Adobe Systems Incorporated in the United States and/or other countries.All other products or brands are registered trademarks or trademarks of their respective holders.7. About installation[MODE]Refer to “RESETTING THE AP-95M” in the Precautions Guide, for details.This product radiates or receives radio wave from its top surface, so we recommend mounting on a wall or ceiling.You can mount on the wall or ceiling using the supplied bracket, by following procedure ➊ to ➎ below. LTo use the security wire, refer to the instruction manual on our website.qwrte80 mm (3.1 in) Hooking screws(Supplied)Screw holeUse the supplied anchor if mounting on drywall.Hook slotsTapping screw (Supplied)Ceiling or wall3.5 × 32 mm (0.1 × 1.3 in)13 × 43 mm (0.5 × 1.7 in)Mark the screw positions using the bracket as the template.162 mm (6.4 in) 42 mm (1.7 in)52 mm (2 in)DimensionsWall orceiling Mount the unit to the bracket by hooking the screws (e) to the hook slots (r) and twisting the unit until it makes a click sound (t). 2.6 × 12 mm(0.1 × 0.5 in)6. Connecting with wireless LANThe following procedures describe how to connect to the AP-95M through a wireless LAN, based on Microsoft® Windows® 10. LThe procedure differs, depending on the connected devices, so follow their instructions when using the other devices. q Start the AP-95M, and then turn ON the PC.w Click the Wireless Network Connection icon.e Select the SSID set to the AP-95M and click [Connect].Then follow the instructions. • The SSID is set to “WIRELESSLAN-0” by default.Clickq Selectw ClickIEEE802.11ac Wave 2 standardDec. 2018RDANGER!Mount the unit securely to a thick surface that can support more than 600 g (1.3 lb).
– 2 – – 3 –AC outletqwreConnect CablesConnect the power adaptor Start the PC[POWER] lights green when the AP-95M has completed its boot up.Check the [LAN] indicationIf [LAN] does not light, check the LAN cable connection.AP-95M(Default: 192.168.0.1)To the [LAN] portTo the [LAN] port To the DC jackTo the DC jackLights:Blinks:Green:Orange:LAN connectedLAN is communicating 1000BASE-T10BASE-T/100BASE-TX LAN cable(User supplied: Category 5e or higher)PC(Example: 192.168.0.100)4. About the setting screenq Open your web browser, then enter the IP address* of the AP-95M into the address bar. *The default IP address is “192.168.0.1.”w Push the [ENTER] key. • The Login Authentication screen will appear.e Enter “admin” (fixed username) and “admin” (default password) in their respective input fields in the Login Authentication window, and then click [OK].To prevent unauthorized accessYou must carefully choose your password, and change it occasionally. • Choose one that is not easy to guess. • Use numbers, characters and letters (both lower and upper case).About web browsersWe recommend using Microsoft Internet Explorer 11 or later with the AP-95M.Enable JavaScript® and set to allow Cookies on your web browser to correctly display the setting screen.If other browsers are used, the screen may not be correctly displayed.About the setting screenq Link to the Icom web siteIf your PC is connected to the Internet, click the Icom logo to open the Icom web site.w Setting menuDisplays the screen name list on a menu line. When you click each menu title, a list of items drops down which you can use to select the desired setting item.e Setting screenDisplays the settings and values when you click the screen name.r Setting buttonsSave or cancel the setting values.• Items and buttons may differ, depending on the setting.qwre3. Connecting and turning ON the powerRWARNING!To prevent electrical shock, television interference (TVI), broadcast interference (BCI) and other problems, ground the AP-95M through the ground terminal.NEVER connect the ground terminal to a gas or electric pipe. This may result in an electrical shock or cause a fire.NOTE: If you have forgotten your password, you cannot access the AP-95M’s setting screen.When you forgot your passwordReset the AP-95M by following the instructions described in the precautions guide. The AP-95M will have to be reset as its default.IP address for PCThe AP-95M’s IP address is set to “192.168.0.1,” and DHCP server to “Disable” as the default. Set the PC's IP address in the 192.168.0.x (Example: “192.168.0.100”).See the PC’s instruction manual for the IP address setting details.Menu Setting screen Setting item Default settingNetwork Settings IP Address IP Address IP Address 192.168.0.1Subnet Mask 255.255.255.0DHCP Server DHCP Server DHCP Server DisableWireless Settings Wireless 1 Wireless LAN Channel 001 CH (2412 MHz)Bandwidth 20 MHzVirtual AP Interface ath0SSID WIRELESSLAN-0Security Authentication Open System/Shared KeyEncryption NoneWireless 2 Wireless LAN Channel 036 CH (5180 MHz)Bandwidth 20 MHzVirtual AP Interface ath1SSID WIRELESSLAN-0Security Authentication Open System/Shared KeyEncryption NoneManagement Administrator Password Username admin (Fixed)Current Password admin (Lower case letters) DAbout default settings LProduct specications, appearance, or functions are subject to change without notice and may differ from this manual.Accessing the setting screen Following procedures describe how to use the AP-95M setting screen using a web browser.Follow the procedure (➊ to ❹) to connect with the AP-95M, and check the indications as described below.• If you are connecting the AP-95M with its default settings, disconnect the networks from your PC.Enterhttp://192.168.0.1/q Enterw Click • When accessing the web browser for the rst time, setting the time zone is required. See the “Setting the interface language and the Time Zone” leaet for details. qClick [Management], then [Administrator]. • The Administrator screen will appear. wFill out each box to change the password. eClick [Apply.] LEnter the new administrator’s password from now on. 5. Changing the administrator passwordTo prevent unauthorized access, you must change the password.EnterClick

Navigation menu