IDT Technology SMS001 Huger e-skateboard User Manual
IDT Technology Limited Huger e-skateboard
USER MANUAL
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3478983 |
| Application ID | eX60zuy07QqW3FAJfAR11w== |
| Document Description | USER MANUAL |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 142.24kB (1777970 bits) |
| Date Submitted | 2017-07-24 00:00:00 |
| Date Available | 2017-07-24 00:00:00 |
| Creation Date | 2017-04-07 12:34:01 |
| Producing Software | Adobe PDF Library 9.9 |
| Document Lastmod | 2017-07-11 14:36:00 |
| Document Title | USER MANUAL |
| Document Creator | Adobe InDesign CS5.5 (7.5.2) |
INTRODUCTION Thank you for purchasing the Huger board Mik. Please read this user manual before using your new product. This product is the most state of art skateboard design on the market and Li-Po battery powered for high performance. It is controlled with the wireless controller and our dedicated App, max speed up to 25 KM/H with 20 KM travel distance per one charger that make you enjoy the most fun of skating. Note: Please keep this manual handy as you use your new product. It contains practical step-by-step instructions, as well as technical specifications and warnings you should know about. • Please use the skateboard in a suitable outdoor environment, and press the remote control after standing steadily on the skateboard. Do not arbitrarily accelerate skateboard in other environment. DOWNLOAD APP • Only play on a flat, open road. Do not play on potholes, gravels, gravel, muddy, rugged, ramps. Do not play on a smooth or wet ground, such as snow, ice, slippery ground, to prevent slipping. • Please wear protective equipments, such as: helmet, elbow and knee pads. Please wear the right clothes to play. Do not barefoot or play on the beach. Fasten the shoelaces, do not let the shoelaces contact the wheels and drive system, causing danger. • Beginners/novices are recommended to use/practice at low speed and on a dry, flat surface. • Check the surroundings before playing. For the user who is unfamiliar with the operations must be far away from crowds. Improper operation may cause serious body injury and property damage. • Adjust the front and rear wheels to ensure they run freely before playing. • Adjust the flexibility of the damping shim by the locknut. • Do not touch the motor and the brakes during running or just after use to avoid hot. • This product is designed for people with safe driving ability. Please place the skateboard in a place where children under 8 years of age are not touched. Age 14+ Huger board Mik SMS608 User Manual • Please comply with local laws and regulations and use it in places where electric skateboards are allowed. • Please be careful to drive. Accidentally encountered obstacles in the process will cause the skateboard out of control. Please be careful to avoid pedestrians and other means of transport (such as: balance cars, skateboards, bicycles, etc.). Power indicators Front wheel Rear wheel Horn On/Off Scan the following QR code or Search Oregon Scientific XXX to find the App to download on your smart device. The App is available on both Apple App Store and Google Play store. Go/Stop switch • Do not use the product on the carpet or places that not suitable for playing. • Do not use the skateboard in rain and snow. • Do not use your phone or headphones while playing. Locking screw Headlights Power button Charging port • Do not hook the skateboard on other vehicles or drag other objects. • The product is only suitable for the user over the age of 14. Children under 14 years of age must be accompanied by parents to play. GETTING STARTED REMOTE CONTROL MAIN UNIT • Do not try the action of the skateboard on the electric skateboard, such as bounce, jerk and other actions. • Do not use skateboards at night or in poor vision. IMPORTANT SAFETY PRECAUTIONS! OVERALL Truck Taillights CHARGE Turning lights Fully charge your skateboard and remote control before first use. Normal charging takes about 2.5 hours for the main unit and 1 hours for the remote. • Do not immerse the product in water, and the electronic drive parts will be damaged. • For accessories replacement, only use the accessories with the same type and specifications. • If you have any problem during using, operating, repairing, please contact customer service. Navigation indicators 1. Connect the supplied charger to the charging port of the skateboard, and then plug into a tandard household outlet. Battery compartment Deck Forward/Reverse Night lights High/Low speed mode switch PACKAGING CONTENTS • 1x Remote control • 1x Charger 4. Check the power indicators on the remote to find the power capacity of the remote. Horn • 2x Name card • 1x User manual charge separately. The power indicator on the charger lights red during charging, and turns green when fully charged. 3. Check the App to find the power capacity of the skateboard. • 1x USB charging cable • 1x T tool Loosen the locking screw on the battery compartment and take out the battery pack to 2. Connect the supplied USB charging cable to the charging port of the remote, and then plug into a computer or an adapter. The power indicator for the remote lights red during charging and turns green when fully charged. • 1x Skateboard • Charger extra adaptor OR Signal indicator Power button USB charging port LEDs Color Power Green Full Green 75% Green 50% Red <25% PLAY YOUR SKATEBOARD 1. Press the power button to turn on/off the skateboard. The headlights turn on. 2. Press and hold the power button for 3 seconds to turn on/off the remote. 3. Push the Go/Stop switch forward to go, release to stop. 4. Double press the power button on the remote to turn on/off the headlights. 5. Changing the playing mode by Forward/Reverse and High/Low speed switches. NOTE • Taillights beam in normal mode; Flash by automatically detect in stop mode. • Left and right turning indicators will flash and are controlled by Gyroscope automatically when turning direction. Items Specification Remark • The skateboard should never be left unattended while charging. Drive Unit 2x 250 W brushless DC motor at rear wheels at rear wheels • Use only the supplied charger and cable for charging. Speed Normal Speed mode: ≤12 km/h Setting by Remote contro High speed mode: : ≤32 km/h Endurance Mileage Normal mode: ≤10 km • Charge batteries on a fireproof surface away from flammable items or liquids. • Do not charge inside an automobile, especially while driving. • Follow the instructions for charging. Do not charge longer than recommended. Unplug the USB cable when the battery is charged. Remote Control BLE 4.0 module connected to Mobile PRECAUTIONS Pedal and brake control • Do not subject the device to excessive force, shock, dust, temperature or humidity. Forward/Reverse control • Do not immerse the device in water. If you spill liquid over it, dry it immediately with a soft, lintfree cloth. Battery LG MG1 Power battery pack 36 V 4 Ah (20x 18650 - 3.6 V) (2200 mAh-10S2P) • Set the horn sound and light colour Size 800 mm x 255 mm x 114 mm • Images shown in this manual may differ from the actual display. • Turn on/off the headlights and taillights Recharge Time 2~2.5 hr • When disposing of this product, ensure it is collected separately for special treatment. • Control the night lights Wheel Base Diameter: 83 mm NOTE Weight About 6.1 kg • The contents of this manual may not be reproduced without the permission of the manufacturer. The navigation indicators on the deck will turn on and indicate the directions when using the GPS navigating function. Board Material Canadian Maple Wood Max Load 100 kg • Navigate directions • Check the power, light, speed status PAIR SKATEBOARD WITH REMOTE NOTE: The remote and the skateboard are paired in the factory. If a new remote is needed, pair the new remote with the skateboard before using. 1. Turn off the skateboard and the remote. 2. Pull the Go/Stop switch as far backwards as it will allow. 3. Turn on the remote. The Signal indicator of the remote flashes quickly. 4. Turn on the skateboard. 5. Release the Go/Stop switch. The Signal indicator of the remote lights steady. The remote and the skateboard are successfully paired. between the English version and any other language versions, the English version shall prevail. FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. WARNING Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. High speed mode: : ≤20 km APP OPERATIONS Open the App, it will find the skateboard automatically. With the App, you can • The built-in battery may discharge completely after a long period without use. Recharge the battery before use. Specifications • Do not clean the device with abrasive or corrosive materials. • Do not tamper with the device’s internal components. Doing so invalidates the warranty. Operation Conditions -10 to 60 0C ≤85 % R.H. Storage Condition -20 to 80 0C ≤95 % R.H. LITHIUM BATTERY SAFETY INSTRUCTIONS • Do not burn or bury batteries. Do not puncture or crush. Do not disassemble. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: NOTE:The technical specifications for this product and the contents of the user manual are subject to change without notice. • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the NOTE: Features and accessories will not be available in all countries. For more information, please contact your local retailer. To download an electronic version of the user manual, please visit http://global.oregonscientific.com/customerSupport.php. This Class B digital apparatus complies with Canadian ICES-3(B)/NMB-3(B) ABOUT OREGON SCIENTIFIC • Recycle lithium batteries. Do not dispose of in the trash Visit our website www.oregonscientific.com to learn more about Oregon Scientific products. • If the electrolyte in the cells should get on your skin, thoroughly wash with soap and water. For any inquiry, please contact our Customer Service at info@oregonscientific.com. • If in the eyes, rinse thoroughly with cool water. Immediately seek medical attention. NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. Oregon Scientific Global Distribution Limited reserves the right to interpret and construe any contents, terms and provisions in this user manual and to amend it, at its sole discretion, at any time without prior notice. To the extent that there is any inconsistency receiver is connected. • Consult the dealer or an experienced radio / TV technician for help. DECLARATION OF CONFORMITY The following information is not to be used as contact for support or sales. Please call our customer service number (listed on our website at www.oregonscientific.com), or on the warranty card for this product for all inquiries instead. We Name: Oregon Scientific, Inc. Address: Centerpointe center 5 centerpointe drive, suite 400 office no. 11 & 19 Lake oswego, oregon 97035 Telephone No.: 971-204-0378 declare that the product Product No.: SMS606 Product Name: Huger board Mik Manufacturer: IDT Technology Limited Address: Block C, 9/F, Kaiser Estate, Phase 1, 41 Man Yue St., Hung Hom, Kowloon, Hong Kong EU – DECLARATION OF CONFORMITY Hereby the manufacturer, IDT Technology Limited, declares that the radio equipment type [Huger board Mik (SMS606)] is in compliance with 2014/53/EU Directive. The full text of the EU Declaration of Conformity is available at the following internet address : www.oregonscientific.com COUNTRIES RED APPROVED COMPLIED All EU countries, Switzerland and Norway DISPOSAL INFORMATION FOR USERS Pursuant to and in accordance with Article 14 of the Directive 2012/19/EU of the European Parliament on waste electrical and electronic equipment (WEEE), and pursuant to and in accordance with Article 20 of the Directive 2013/56/EU of the European Parliament on batteries and accumulators and waste batteries. The barred symbol of the rubbish bin shown on the equipment indicates that, at the end of its useful life, the product must be collected separately from other waste. Please note that the batteries/rechargeable batteries must be removed from the equipment before it is given as waste. To remove the batteries/accumulators refer to the specifications in the user manual. Therefore, any products that have reached the end of their useful life must be given to waste disposal centers specializing in separate collection of waste electrical and electronic equipment, or given back to the dealer when purchasing a new WEEE, pursuant to and in accordance with Article 14 as implemented in the country. The adequate separate collection for the subsequent start-up of the equipment sent to be recycled, treated and disposal of in an environmentally compatible way contributes to preventing possible negative effects on the environment and health and optimizes the recycling and reuse of components making up the apparatus. Abusive disposal of the product by the user involves application of the administrative sanctions according to the laws in force.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.7 Linearized : No XMP Toolkit : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39 Create Date : 2017:04:07 12:34:01+08:00 Metadata Date : 2017:07:11 14:36+08:00 Modify Date : 2017:07:11 14:36+08:00 Creator Tool : Adobe InDesign CS5.5 (7.5.2) Page Image Page Number : 1, 2 Page Image Format : JPEG, JPEG Page Image Width : 256, 256 Page Image Height : 256, 256 Page Image : (Binary data 3706 bytes, use -b option to extract), (Binary data 3588 bytes, use -b option to extract) Instance ID : uuid:eeabae76-3444-4b3f-8606-cc2e9606b5b0 Document ID : xmp.did:C2C2B5701B206811808391988194D5E3 Original Document ID : xmp.did:34D2904819206811808391988194D5E3 Rendition Class : proof:pdf History Action : created, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved History Instance ID : xmp.iid:34D2904819206811808391988194D5E3, xmp.iid:39D2904819206811808391988194D5E3, xmp.iid:3AD2904819206811808391988194D5E3, xmp.iid:6A0F6A0E1B206811808391988194D5E3, xmp.iid:6F0F6A0E1B206811808391988194D5E3, xmp.iid:740F6A0E1B206811808391988194D5E3, xmp.iid:BCC2B5701B206811808391988194D5E3, xmp.iid:BDC2B5701B206811808391988194D5E3, xmp.iid:C2C2B5701B206811808391988194D5E3, xmp.iid:069F15F91B206811808391988194D5E3, xmp.iid:0B9F15F91B206811808391988194D5E3, xmp.iid:2513F3861C206811808391988194D5E3, xmp.iid:1B5D24330C2068118A6DA1B89D52A77F, xmp.iid:215D24330C2068118A6DA1B89D52A77F, xmp.iid:291B21FD152068118A6DA1B89D52A77F, xmp.iid:549EB7B5182068118A6DA1B89D52A77F, xmp.iid:5A9EB7B5182068118A6DA1B89D52A77F, xmp.iid:FC7F1174072068118083D1767AC83442, xmp.iid:E2E6BC12082068118083D1767AC83442, xmp.iid:E9E6BC12082068118083D1767AC83442, xmp.iid:1F6CAE4D082068118083D1767AC83442, xmp.iid:2141025B082068118083D1767AC83442, xmp.iid:2841025B082068118083D1767AC83442, xmp.iid:2941025B082068118083D1767AC83442, xmp.iid:2A41025B082068118083D1767AC83442, xmp.iid:34A8D660092068118083D1767AC83442, xmp.iid:5827AF110B2068118083D1767AC83442, xmp.iid:5F27AF110B2068118083D1767AC83442, xmp.iid:EF10CAA50B2068118083D1767AC83442, xmp.iid:97F7D8E00B2068118083D1767AC83442, xmp.iid:9EF7D8E00B2068118083D1767AC83442, xmp.iid:46A5951A0C2068118083D1767AC83442, xmp.iid:D3FB91A00E2068118083961C1137AEB7, xmp.iid:DAFB91A00E2068118083961C1137AEB7, xmp.iid:B623DFDF102068118083961C1137AEB7, xmp.iid:B723DFDF102068118083961C1137AEB7, xmp.iid:FD7F1174072068118C14EBBD3F9A9E80, xmp.iid:57EC6E8D072068118C14EBBD3F9A9E80, xmp.iid:5EEC6E8D072068118C14EBBD3F9A9E80, xmp.iid:D0413A05082068118C14EBBD3F9A9E80, xmp.iid:DAAE7517082068118C14EBBD3F9A9E80, xmp.iid:DBAE7517082068118C14EBBD3F9A9E80, xmp.iid:E2AE7517082068118C14EBBD3F9A9E80, xmp.iid:667B67FB1A2068118083945C19C2271E, xmp.iid:6D7B67FB1A2068118083945C19C2271E, xmp.iid:590DB33C1B2068118083945C19C2271E, xmp.iid:3F38F5491B2068118083945C19C2271E, xmp.iid:4638F5491B2068118083945C19C2271E, xmp.iid:EE778621212068118083945C19C2271E History When : 2017:03:30 11:27:30+08:00, 2017:03:30 11:35:54+08:00, 2017:03:30 11:35:54+08:00, 2017:03:30 11:40:12+08:00, 2017:03:30 11:40:41+08:00, 2017:03:30 11:41:17+08:00, 2017:03:30 11:42:57+08:00, 2017:03:30 11:45:48+08:00, 2017:03:30 11:45:48+08:00, 2017:03:30 11:46:46+08:00, 2017:03:30 11:49:57+08:00, 2017:03:30 11:50:44+08:00, 2017:03:31 12:32:32+08:00, 2017:03:31 14:08:49+08:00, 2017:03:31 14:33:07+08:00, 2017:03:31 14:51:37+08:00, 2017:03:31 17:58:39+08:00, 2017:04:01 10:08:45+08:00, 2017:04:01 10:13:11+08:00, 2017:04:01 10:13:50+08:00, 2017:04:01 10:14:50+08:00, 2017:04:01 10:15:13+08:00, 2017:04:01 10:16:18+08:00, 2017:04:01 10:17:42+08:00, 2017:04:01 10:22:08+08:00, 2017:04:01 10:22:32+08:00, 2017:04:01 10:34:38+08:00, 2017:04:01 10:35:52+08:00, 2017:04:01 10:38:47+08:00, 2017:04:01 10:40:26+08:00, 2017:04:01 10:40:45+08:00, 2017:04:01 10:42:02+08:00, 2017:04:06 11:09:09+08:00, 2017:04:06 11:10:02+08:00, 2017:04:06 11:25:14+08:00, 2017:04:06 14:37:10+08:00, 2017:04:06 16:36:20+08:00, 2017:04:06 16:37:02+08:00, 2017:04:06 16:37:49+08:00, 2017:04:06 16:40:23+08:00, 2017:04:06 16:40:54+08:00, 2017:04:06 16:41:38+08:00, 2017:04:06 16:42:05+08:00, 2017:04:07 11:49:40+08:00, 2017:04:07 11:50:40+08:00, 2017:04:07 11:51:30+08:00, 2017:04:07 11:51:52+08:00, 2017:04:07 11:52:22+08:00, 2017:04:07 12:33:41+08:00 History Software Agent : Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5 History Changed : /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata Derived From Instance ID : xmp.iid:BDC2B5701B206811808391988194D5E3 Derived From Document ID : xmp.did:34D2904819206811808391988194D5E3 Derived From Original Document ID: xmp.did:34D2904819206811808391988194D5E3 Derived From Rendition Class : default Doc Change Count : 469 Format : application/pdf Producer : Adobe PDF Library 9.9 Trapped : False Page Count : 2 Creator : Adobe InDesign CS5.5 (7.5.2)EXIF Metadata provided by EXIF.tools