IDT Technology WGR800X-01 Integrated Wind Sensor User Manual
IDT Technology Limited Integrated Wind Sensor
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 4098928 |
| Application ID | +faVj7vECfkkAT4/fll8kQ== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 90.95kB (1136851 bits) |
| Date Submitted | 2018-12-07 00:00:00 |
| Date Available | 2018-12-07 00:00:00 |
| Creation Date | 2013-09-27 17:51:57 |
| Producing Software | Adobe PDF Library 7.0 |
| Document Lastmod | 2018-12-07 14:56:28 |
| Document Title | User Manual |
| Document Creator | Adobe InDesign CS2 (4.0) |
Integrated Wind Sensor USER MANUAL WGR800X EN Integrated Wind Sensor INTRODUCTION Thank you for selecting the Oregon Scientific Integrated Wind Sensor (WGR800X). Model: WGR800X USER MANUAL The sensor is battery and solar power operated. It is capable of transmitting data to the base station wirelessly within an approximate operating range of 100 meters (328 feet). CONTENTS Introduction....................................................................... 1 NOTE Please keep this manual handy as you use your new product. It contains practical step-by-step instructions, as well as technical specifications and warnings you should know about. Packaging Contents......................................................... 1 Overview............................................................................ 2 Getting Started.................................................................. 2 Set Up Remote Integrated Wind Sensor......................... 2 PACKAGING CONTENTS Battery Installation........................................................... 2 Mounting the Sensor........................................................ 2 Precautions....................................................................... 3 Specifications.................................................................... 4 About Oregon Scientific................................................... 4 EU-declaration of Conformity.......................................... 4 Information for users........................................................ 5 1 x Wind Sensor (1 x Wind Vane Above and 1 x Anemometer Below) WGR800X_UM_300103595-00005-10_EN_R1.indd 1 1 x sensor connector 2 x AA UM-3 1.5V batteries 4 x Screws (Type A) 1 x Round U- bolt EN OVERVIEW 1. 2. 3. 4. BATTERY INSTALLATION Wind vane Wind vane casing Anemometer Solar power socket 1. Unscrew the anemometer from the Integrated wind sensor carefully. 2. Insert batteries matching the polarities (+ / -) and replace the anemometer. Press RESET after each battery change. GETTING STARTED SET UP REMOTE INTEGRATED WIND SENSOR The Integrated wind sensor takes wind speed and direction readings. NOTE Use alkaline batteries for longer usage and consumer grade lithium batteries in temperatures below freezing. MOUNTING THE SENSOR NOTE The sensor should be positioned in an open area away from trees or other obstructions. 1. Loosen the screw on the wind vane 2. Install the wind vane on the top of the wind vane casing with some pressure. 3. Tighten the screw to secure the setup. WGR800X_UM_300103595-00005-10_EN_R1.indd 2 EN PRECAUTIONS • • • • • Secure the sensor connector in the desired location: a. Align the back of the sensor connector to an existing pole. Secure in place by inserting the ends of the U-bolt into the holes on the sensor connector and securing it with washers and bolts. OR b. Insert 4 type A screws into the holes of the sensor connector. Screw firmly into place, i.e., fence. • • • Slide wind vane onto the smaller end of the sensor connector. • • NOTE The technical specifications for this product and the contents of the user manual are subject to change without notice. IMPORTANT Ensure that the wind sensor is pointing North to enable it to record accurate readings. WGR800X_UM_300103595-00005-10_EN_R1.indd 3 Do not subject the unit to excessive force, shock, dust, temperature or humidity. Do not cover the ventilation holes with any items such as newspapers, curtains etc. Do not immerse the unit in water. If you spill liquid over it, dry it immediately with a soft, lint-free cloth. Do not clean the unit with abrasive or corrosive materials. Do not tamper with the unit’s internal components. This invalidates the warranty. Only use fresh batteries. Do not mix new and old batteries. Do not dispose old batteries as unsorted municipal waste. Collection of such waste separately for special treatment is necessary. Images shown in this manual may differ from the actual display. When disposing of this product, ensure it is collected separately for special treatment and not as household waste. The contents of this manual may not be reproduced without the permission of the manufacturer. EN Oregon Scientific Global Distribution Limited reserves the right to interpret and construe any contents, terms and provisions in this user manual and to amend it, at its sole discretion, at any time without prior notice. To the extent that there is any inconsistency between the English version and any other language versions, the English version shall prevail. NOTE Features and accessories will not be available in all countries. For more information, please contact your local retailer. To download an electronic version of the user manual, please visit http://global.oregonscientific.com/customerSupport.php. SPECIFICATIONS Dimensions (L x W x H) Weight Wind speed unit Speed accuracy Direction accuracy Transmission of wind speed signal Memory Battery EU-DECLARATION OF CONFORMITY 178 x 76 x 214 mm (7 x 3 x 8.4 inches) 100 g (0.22 lbs) without battery m/s, kph, mph, knots 2 m/s ~ 10 m/s (+/- 3 m/s) 10 m/s ~ 56 m/s (+/- 10%) 16 positions Hereby the manufacturer, Oregon Scientific Global Distribution Limited, declares that the radio equipment type Wind Sensor (model: WGR800X) is in compliance with 2014/53/EU Directive. The full text of the EU Declaration of Conformity is available at the following internet address: http://global.oregonscientific.com/customerSupport.php Approx. every 14 seconds Max wind speed 2 x UM-3 (AA) 1.5V batteries COUNTRIES RED APPROVED COMPLIED ABOUT OREGON SCIENTIFIC All EU countries, Switzerland Visit our website www.oregonscientific.com to learn more about Oregon Scientific products. and Norway For any inquiry, please contact our Customer Services at info@oregonscientific.com. WGR800X_UM_300103595-00005-10_EN_R1.indd 4 EN INFORMATION FOR USERS FCC WARNING Pursuant to and in accordance with Article 14 of the Directive 2012/19/EU of the European Parliament on waste electrical and electronic equipment (WEEE), and pursuant to and in accordance with Article 20 of the Directive 2013/56/EU of the European Parliament on batteries and accumulators and waste batteries. Any Changes expressly or modifications not approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. The barred symbol of the rubbish bin shown on the equipment indicates that, at the end of its useful life, the product must be collected separately from other waste. Operation is subject to the following two conditions: Please note that the batteries/rechargeable batteries must be removed from the equipment before it is given as waste. To remove the batteries/accumulators refer to the specifications in the user manual. Therefore, any products that have reached the end of their useful life must be given to waste disposal centers specializing in separate collection of waste electrical and electronic equipment, or given back to the dealer when purchasing a new WEEE, pursuant to and in accordance with Article 14 as implemented in the country. (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The adequate separate collection for the subsequent start-up of the equipment sent to be recycled, treated and disposal of in an environmentally compatible way contributes to preventing possible negative effects on the environment and health and optimizes the recycling and reuse of components making up the apparatus.Abusive disposal of the product by the user involves application of the administrative sanctions according to the laws in force. WGR800X_UM_300103595-00005-10_EN_R1.indd 5
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Create Date : 2013:09:27 17:51:57+08:00 Creator : Adobe InDesign CS2 (4.0) Modify Date : 2018:12:07 14:56:28-08:00 Has XFA : No XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Metadata Date : 2018:12:07 14:56:28-08:00 Creator Tool : Adobe InDesign CS2 (4.0) Thumbnail Width : 256 Thumbnail Height : 48 Thumbnail Format : JPEG Thumbnail Image : (Binary data 2311 bytes, use -b option to extract) Instance ID : uuid:3fc6f9c0-5c96-469b-a762-f6475c6f8023 Document ID : adobe:docid:indd:e1d00764-292e-11e3-b594-8977ebd28ac1 Rendition Class : proof:pdf Derived From Instance ID : 586a47da-08b5-11e2-92e0-945ab3277b30 Derived From Document ID : adobe:docid:indd:586a47d9-08b5-11e2-92e0-945ab3277b30 Format : application/pdf Producer : Adobe PDF Library 7.0 Trapped : False N Pages : 1 Has Visible Transparency : False Has Visible Overprint : True Max Page Size W : 147.999924 Max Page Size H : 105.000137 Max Page Size Unit : Millimeters Font Name : ArialMT, Arial-BoldMT Font Family : Arial, Arial Font Face : Regular, Bold Font Type : Open Type, Open Type Font Version : Version 5.01.2x, Version 5.01.2x Font Composite : False, False Font File Name : Arial.ttf, Arial Bold.ttf Plate Names : Black Swatch Group Name : 默认色板组 Swatch Group Type : 0 Page Count : 6EXIF Metadata provided by EXIF.tools