IEI Integration IKARPC07AA9 Panel PC User Manual IKARPC 07A A9 In vehicle Panel PC
IEI Integration Corp. Panel PC IKARPC 07A A9 In vehicle Panel PC
User Manual rev
IKARPC-07A-A9 In-vehicle Panel PC MODEL: IKARPC-07A-A9 7” Android-Based Panel PC with Touchscreen Freescale™ i.MX6 ARM Cortex™-A9 CPU, OBD-II, CAN, USB, Audio, RS-232, RoHS Compliant, IP 54 Front Panel User Manual Page I Rev. 1.01 – October 28, 2015 IKARPC-07A-A9 In-vehicle Panel PC Revision Date Version Changes October 28, 2015 1.01 Updated product photos June 12, 2015 1.00 Initial release Page II IKARPC-07A-A9 In-vehicle Panel PC Copyright COPYRIGHT NOTICE The information in this document is subject to change without prior notice in order to improve reliability, design and function and does not represent a commitment on the part of the manufacturer. In no event will the manufacturer be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or inability to use the product or documentation, even if advised of the possibility of such damages. This document contains proprietary information protected by copyright. All rights are reserved. No part of this manual may be reproduced by any mechanical, electronic, or other means in any form without prior written permission of the manufacturer. TRADEMARKS All registered trademarks and product names mentioned herein are used for identification purposes only and may be trademarks and/or registered trademarks of their respective owners. Page III IKARPC-07A-A9 In-vehicle Panel PC Manual Conventions WARNING Warnings appear where overlooked details may cause damage to the equipment or result in personal injury. Warnings should be taken seriously. CAUTION Cautionary messages should be heeded to help reduce the chance of losing data or damaging the product. NOTE These messages inform the reader of essential but non-critical information. These messages should be read carefully as any directions or instructions contained therein can help avoid making mistakes. HOT SURFACE This symbol indicates a hot surface that should not be touched without taking care. Page IV IKARPC-07A-A9 In-vehicle Panel PC Table of Contents 1 INTRODUCTION.......................................................................................................... 1 1.1 OVERVIEW.................................................................................................................. 2 1.2 FEATURES ................................................................................................................... 2 1.3 FRONT PANEL ............................................................................................................. 3 1.3.1 LED Indicators................................................................................................... 4 1.4 REAR PANEL ............................................................................................................... 4 1.5 RIGHT SIDE PANEL ..................................................................................................... 6 1.6 TOP PANEL ................................................................................................................. 6 1.7 BOTTOM PANEL .......................................................................................................... 7 1.8 SYSTEM SPECIFICATIONS ............................................................................................ 7 1.9 DIMENSIONS ............................................................................................................. 10 2 UNPACKING ................................................................................................................ 11 2.1 PACKING LIST........................................................................................................... 12 3 INSTALLATION ......................................................................................................... 14 3.1 ANTI-STATIC PRECAUTIONS ...................................................................................... 15 3.2 INSTALLATION PRECAUTIONS ................................................................................... 15 3.3 INSTALLATION AND CONFIGURATION STEPS ............................................................. 16 3.4 SD CARD INSTALLATION .......................................................................................... 16 3.5 SIM CARD INSTALLATION ........................................................................................ 17 3.6 MOUNTING THE SYSTEM .......................................................................................... 19 3.7 EXTERNAL I/O CONNECTORS ................................................................................... 20 3.7.1 I/O Connector 1 (20-pin) ................................................................................. 20 3.7.2 I/O Connector 2 (24-pin) ................................................................................. 21 3.7.3 Video Input Connector ..................................................................................... 22 3.7.4 Power Input Connection .................................................................................. 23 3.7.5 USB Connector ................................................................................................ 24 3.8 SYSTEM MAINTENANCE ........................................................................................... 24 4 USING THE IKARPC-07A-A9 .................................................................................. 25 Page V IKARPC-07A-A9 In-vehicle Panel PC 4.1 POWER-ON/OFF PROCEDURE ................................................................................... 26 4.1.1 Installation Checklist ....................................................................................... 26 4.1.2 Power-on Procedure ........................................................................................ 26 4.1.3 Power-off Procedure ........................................................................................ 27 4.2 HOME SCREEN ......................................................................................................... 28 4.2.1 Navigation Buttons........................................................................................... 28 4.2.2 Multiple Home Screens .................................................................................... 29 4.2.3 Adding Shortcut................................................................................................ 29 4.2.4 Favorites Tray .................................................................................................. 31 4.2.5 Arranging Home Screen ................................................................................... 31 4.3 STATUS BAR ............................................................................................................. 32 4.4 SETTINGS ................................................................................................................. 34 4.4.1 WIRELESS & NETWORKS .............................................................................. 34 4.4.1.1 More Settings ............................................................................................ 35 4.4.2 Sound................................................................................................................ 36 4.4.3 Display ............................................................................................................. 37 4.4.4 Storage ............................................................................................................. 38 4.4.5 Apps .................................................................................................................. 39 4.4.6 Users ................................................................................................................ 39 4.4.7 Location Access................................................................................................ 40 4.4.8 Security ............................................................................................................ 41 4.4.9 Language & Input ............................................................................................ 42 4.4.10 Backup & Reset .............................................................................................. 43 4.4.11 Add account .................................................................................................... 44 4.4.12 Date & Time ................................................................................................... 44 4.4.13 Accessibility ................................................................................................... 45 4.4.14 About Tablet ................................................................................................... 46 4.5 FILE MANAGEMENT ................................................................................................. 47 4.6 CAMERA ................................................................................................................... 49 4.7 SYSTEM UPDATE ...................................................................................................... 50 5 INTERFACE CONNECTORS ................................................................................... 51 5.1 PERIPHERAL INTERFACE CONNECTORS ..................................................................... 52 5.2 INTERNAL PERIPHERAL CONNECTORS ...................................................................... 53 5.2.1 Camera Connector (CAMERA1) ..................................................................... 54 Page VI IKARPC-07A-A9 In-vehicle Panel PC 5.2.2 LED Connector (LED_BD2)............................................................................ 54 5.2.3 LVDS Connector (CN2) ................................................................................... 55 5.2.4 Microphone Connector (MIC1) ....................................................................... 55 5.2.5 Programming Connector (MCU1) ................................................................... 56 5.2.6 Programming Connector (JP2) ....................................................................... 56 5.2.7 Speaker Connector (SPK1) .............................................................................. 56 5.2.8 Touch Panel Connector (CN10) ....................................................................... 56 A REGULATORY COMPLIANCE .............................................................................. 58 B SAFETY PRECAUTIONS ......................................................................................... 63 B.1 SAFETY PRECAUTIONS ............................................................................................. 64 B.1.1 General Safety Precautions ............................................................................. 64 B.1.2 Anti-static Precautions .................................................................................... 65 B.1.3 Product Disposal ............................................................................................. 66 B.2 MAINTENANCE AND CLEANING PRECAUTIONS ........................................................ 66 B.2.1 Maintenance and Cleaning.............................................................................. 66 B.2.2 Cleaning Tools ................................................................................................. 67 C OBD-II READER COMMAND ................................................................................ 68 C.1 SELECT A CHIP INITIAL MODE: UPDATE F/W OR RUN F/W .................................... 69 C.2 BOOT MODE ............................................................................................................ 69 C.3 RUN MODE .............................................................................................................. 69 C.4 INTO CAN_STANDARD V2.2.B (CAN STANDARD) .................................................. 71 C.5 INTO TELEMATICS .................................................................................................. 73 D WATCHDOG TIMER ................................................................................................ 77 E HAZARDOUS MATERIALS DISCLOSURE ......................................................... 80 E.1 HAZARDOUS MATERIALS DISCLOSURE TABLE FOR IPB PRODUCTS CERTIFIED AS ROHS COMPLIANT UNDER 2002/95/EC WITHOUT MERCURY ....................................... 81 Page VII IKARPC-07A-A9 In-vehicle Panel PC List of Figures Figure 1-1: IKARPC-07A-A9 Panel PC ..........................................................................................2 Figure 1-2: Front View ....................................................................................................................3 Figure 1-3: LED Indicators .............................................................................................................4 Figure 1-4: Rear View .....................................................................................................................5 Figure 1-5: Right Side Panel ..........................................................................................................6 Figure 1-6: Top Panel .....................................................................................................................6 Figure 1-7: Bottom Panel ...............................................................................................................7 Figure 1-8: Dimensions (unit: mm) .............................................................................................10 Figure 3-1: SD Card Slot Access Panel Retention Screw ........................................................16 Figure 3-2: Install SD Card ...........................................................................................................17 Figure 3-3: SIM Card Slot Access Panel Retention Screw .......................................................17 Figure 3-4: Install SIM Card .........................................................................................................18 Figure 3-5: VESA Mount Retention Screw Holes ......................................................................19 Figure 3-6: IO 1 Connector Pinout Locations ............................................................................20 Figure 3-7: IO 2 Connector Pinout Locations ............................................................................21 Figure 3-8: Video Input Connector ..............................................................................................22 Figure 3-9: Power Input Connector .............................................................................................23 Figure 3-10: ACC Power Cable ....................................................................................................23 Figure 3-12: USB Connector ........................................................................................................24 Figure 4-1: Power Connector and Power Button ......................................................................27 Figure 4-2: Power-off Confirmation Screen ...............................................................................28 Figure 4-3: Navigation Buttons ...................................................................................................28 Figure 4-4: Multiple Home Screens .............................................................................................29 Figure 4-5: Launcher Button .......................................................................................................30 Figure 4-6: Launcher Page ..........................................................................................................30 Figure 4-7: Favorites Tray ............................................................................................................31 Figure 4-8: Move and Trash Item on Home Screen ...................................................................32 Figure 4-9: Status Bar ..................................................................................................................32 Figure 4-10: Status Bar – Setting Shortcut ................................................................................33 Figure 4-11: Status Bar – Notification ........................................................................................33 Page VIII IKARPC-07A-A9 In-vehicle Panel PC Figure 4-12: Wireless and Networks Settings ...........................................................................34 Figure 4-13: More Settings Menu ................................................................................................35 Figure 4-14: Sound Menu .............................................................................................................36 Figure 4-15: Display Menu ...........................................................................................................37 Figure 4-16: Storage Menu ..........................................................................................................38 Figure 4-17: Apps Menu ...............................................................................................................39 Figure 4-18: Users Menu ..............................................................................................................39 Figure 4-19: Location Access Menu ...........................................................................................40 Figure 4-20: Security Menu ..........................................................................................................41 Figure 4-21: Language & Input Menu .........................................................................................42 Figure 4-22: Backup & Reset Menu ............................................................................................43 Figure 4-23: Add Account Menu .................................................................................................44 Figure 4-24: Date & Time Menu ...................................................................................................44 Figure 4-25: Accessibility Menu ..................................................................................................45 Figure 4-26: About Tablet Menu ..................................................................................................46 Figure 4-27: ES File Explorer Icon ..............................................................................................47 Figure 4-28: ES File Explorer Screen ..........................................................................................48 Figure 4-29: Possible Storage Devices ......................................................................................48 Figure 4-30: Camera Application ................................................................................................49 Figure 4-31: Additional System Updates ...................................................................................50 Figure 5-1: Main Board Layout Diagram (Front Side) ...............................................................52 Figure 5-2: Main Board Layout Diagram (Solder Side) .............................................................52 Page IX IKARPC-07A-A9 In-vehicle Panel PC List of Tables Table 1-1: Technical Specifications ..............................................................................................9 Table 2-1: Packing List .................................................................................................................13 Table 3-1: IO 1 Connector Pinouts ..............................................................................................20 Table 3-2: IO 2 Connector Pinouts ..............................................................................................21 Table 3-3: Video Input Connector Pinouts .................................................................................22 Table 3-4: Power Input Connector Pinouts ................................................................................23 Table 4-1: Power State and Ignition System .............................................. 錯誤! 尚未定義書籤。 Table 4-2: Navigation Buttons .....................................................................................................29 Table 4-3: Camera Application–Camera Setting Buttons .........................................................49 Table 5-1: Peripheral Interface Connectors ...............................................................................53 Table 5-2: Camera Connector (CAMERA1) Pinouts ..................................................................54 Table 5-3: LED Connector (LED_BD2) Pinouts .........................................................................54 Table 5-4: LVDS Connector (CN2) Pinouts ................................................................................55 Table 5-5: Microphone Connector (MIC1) Pinouts ....................................................................55 Table 5-6: Programming Connector (MCU1) Pinouts ...............................................................56 Table 5-7: Programming Connector (JP2) Pinouts ...................................................................56 Table 5-8: Speaker Connector (SPK1) Pinouts ..........................................................................56 Table 5-9: Touch Panel Connector (CN10) Pinouts ..................................................................57 Page X IKARPC-07A-A9 In-vehicle Panel PC Chapter 1 Introduction Page 1 IKARPC-07A-A9 In-vehicle Panel PC 1.1 Overview Figure 1-1: IKARPC-07A-A9 Panel PC The IKARPC-07A-A9 is a 7” Android-based panel PC At the heart of the system is the Freescale™ i.MX6 ARM Cortex™-A9 processor, offering low power in a powerful package. The system also offers a multimedia experience with a built-in camera, microphone and speaker. Other peripherals include one USB port, one video input connector, and two I/O connectors which support RS-232, OBD-II, CAN 2.0 B, digital I/O, USB and audio input/output. Wireless networking capabilities include Bluetooth and 802.11a/b/g/n. 1.2 Features The IKARPC-07A-A9 features the following: Page 2 2-point projected capacitive touchscreen Freescale™ i.MX6 ARM Cortex™-A9 processor On-board 1.0 GB SDRAM memory Pre-installed Android 4.2 operating system 802.11a/b/g/n wireless Bluetooth + EDR Class 1 3.75G connectivity with optional external antenna Support OBD-II, CAN 2.0 B, digital I/O and RS-232 IKARPC-07A-A9 In-vehicle Panel PC GPS antenna connector 5-megapixel front-facing camera, speaker, microphone IP 54 compliant front panel RoHS compliance 1.3 Front Panel The front of the IKARPC-07A-A9 is a flat panel screen with a plastic frame. The components on the front panel are listed below: 5-megapixel camera Ambient light sensor LED indicators (see Section 1.3.1) Microphone RFID reader Figure 1-2: Front View Page 3 IKARPC-07A-A9 In-vehicle Panel PC 1.3.1 LED Indicators The LED indicators on the front panel show the status of power, Bluetooth, Wi-Fi and GPRS/HSUPA connection. Figure 1-3: LED Indicators 1.4 Rear Panel The rear panel has VESA mounting screw holes and an access panel for SD card and SIM card. The following I/O connectors can also be found on the rear panel. 1 x 12 V/24 V DC input connector 20-pin connector: 1 x OBD-II 1 x USB 1 x Audio line-out (R+L) 1 x Audio line-in 1 x RS-232 2-bit digital input 2-bit digital output 8-pin connector: Page 4 1 x CAN 2.0 B 24-pin connector: 1 x 10/100 Mbps LAN 4 x Video in IKARPC-07A-A9 In-vehicle Panel PC 1 x 3.75G antenna connector 1 x GPS antenna connector Figure 1-4: Rear View Page 5 IKARPC-07A-A9 In-vehicle Panel PC 1.5 Right Side Panel The right side panel has one USB 2.0 host port. Figure 1-5: Right Side Panel 1.6 Top Panel The top panel has a power button. Press the power button for 4~6 seconds to power on the system. Figure 1-6: Top Panel Page 6 IKARPC-07A-A9 In-vehicle Panel PC 1.7 Bottom Panel The bottom panel has a 2 W speaker. Figure 1-7: Bottom Panel 1.8 System Specifications The technical specifications for the IKARPC-07A-A9 systems are listed in Table 1-1. System CPU Freescale™ i.MX6 ARM Cortex™-A9 processor Memory On-board 1 GB SDRAM memory Boot Flash On-board 8 GB iNAND flash OS Android 4.2 Storage One SD card slot (SD 2.0 compatible, max. 32 GB) Audio 1 x Speaker (2 W) 1 x Microphone Camera Front-facing 5-megapixel camera Watchdog Timer Software programmable supports 1~255 sec. system reset Real-time Clock Battery backup RTC Display LCD 7” TFT LCD with LED backlight Max. Resolution 1024 x 600 (WSVGA) Brightness (cd/m ) 500 Contrast Ratio 700:1 Viewing Angle 75/75/70/75 degree Touchscreen 2-point projected capacitive touchscreen with USB interface Auto-dimming Ambient light sensor on the front panel Page 7 IKARPC-07A-A9 In-vehicle Panel PC Communication LAN 1 x 10/100 Mbps Wireless LAN 802.11a/b/g/n Bluetooth Bluetooth + HS WWAN Built-in u-blox LISA-U200-02S 3.75G UMTS/HSPA+ module supports: HSPA/UMTS-800/850/1900/2100 MHz Quad-band EDGE/GPRS/GSM-850/900/1800/1900MHz GPS Built-in u-blox NEO-M8N GPS module with external antenna RFID On-board RFID antenna 13.56MHz protocols supported: ISO/IEC 14443A, ISO/IEC 14443B PCD 106 kbit/s to 848 kbit/s ISO/IEC 14443A, ISO/IEC 14443B PICC 106 kbit/s to 424 kbit/s Power Power Input 4-pin (2x2) Molex power connector supports DC or ACC power DC Power 12 V/24 V DC input via cigarette lighter power cable ACC Power ACC power on/off mode with software configurable delay time Physical Character Construction Material ABS + PC plastic front frame Mounting VESA 75 mm x 75 mm Dimensions (W x H x D) 210 mm x 154 mm x 29 mm Operation Temperature -20ºC ~ 60ºC with air flow Storage Temperature -30ºC ~ 70ºC Humidity 5% ~ 85%, non-condensing Net Weight 800 g Operating Shock Half-sine wave shock 5 G, 11 ms, 3 shocks per axis Operating Vibration MIL-STD-810G 514.6C-1 (with SSD) IP level IP 54 compliant front panel Safety CE, FCC, e-MARK Connectors and Buttons Antenna Connectors 1 x 3.75G antenna SMA female connector 1 x GPS antenna SMA female connector Expansion Slot 1 x SIM card slot I/O Ports 1 x 12 V/24 V DC input connector 1 x USB host port Page 8 IKARPC-07A-A9 In-vehicle Panel PC 20-pin connector: 1 x 10/100 Mbps LAN 1 x CAN 2.0 B 1 x OBD-II 1 x USB 24-pin connector: 1 x Audio line-out (R+L) 1 x Audio line-in 1 x RS-232 2-bit digital input 2-bit digital output 8-pin connector: 4 x Video input Button 1 x Power button LED Indicators 1 x Power LED 1 x Bluetooth status LED 1 x Wi-Fi connection LED 1 x 3G connection LED Table 1-1: Technical Specifications Page 9 IKARPC-07A-A9 In-vehicle Panel PC 1.9 Dimensions The dimensions are shown below. Figure 1-8: Dimensions (unit: mm) Page 10 IKARPC-07A-A9 In-vehicle Panel PC Chapter 2 Unpacking Page 11 IKARPC-07A-A9 In-vehicle Panel PC To unpack the panel PC, follow the steps below: WARNING! The front side LCD screen has a protective plastic cover stuck to the screen. Only remove the plastic cover after the system has been properly installed. This ensures the screen is protected during the installation process. Step 1: Use box cutters, a knife or a sharp pair of scissors that seals the top side of the external (second) box. Step 2: Open the external (second) box. Step 3: Use box cutters, a knife or a sharp pair of scissors that seals the top side of the internal (first) box. Step 4: Lift the monitor out of the boxes. Step 5: Remove both polystyrene ends, one from each side. Step 6: Pull the plastic cover off the flat panel PC. Step 7: Make sure all the components listed in the packing list are present. 2.1 Packing List NOTE: If any of the components listed in the checklist below are missing, do not proceed with the installation. Contact the IEI reseller or vendor the IKARPC-07A-A9 was purchased from or contact an IEI sales representative directly by sending an email to sales@ieiworld.com. 3 26H378H Page 12 IKARPC-07A-A9 In-vehicle Panel PC The IKARPC-07A-A9 is shipped with the following components: Quantity Item IKARPC-07A-A9 ACC power cable Image panel PC (P/N: 32002-001900-100-RS) GPS/GSM antenna (P/N: 32506-000100-100-RS) User manual CD and driver CD Table 2-1: Packing List If any of these items are missing or damaged, contact the distributor or sales representative immediately. Page 13 IKARPC-07A-A9 In-vehicle Panel PC Chapter 3 Installation Page 14 IKARPC-07A-A9 In-vehicle Panel PC 3.1 Anti-static Precautions WARNING: Failure to take ESD precautions during the maintenance of the IKARPC-07A-A9 may result in permanent damage to the IKARPC-07A-A9 and severe injury to the user. Electrostatic discharge (ESD) can cause serious damage to electronic components, including the IKARPC-07A-A9. Dry climates are especially susceptible to ESD. It is therefore critical that whenever the IKARPC-07A-A9 is accessed internally, or any other electrical component is handled, the following anti-static precautions are strictly adhered to. Wear an anti-static wristband: Wearing a simple anti-static wristband can help to prevent ESD from damaging the board. Self-grounding: Before handling the board, touch any grounded conducting material. During the time the board is handled, frequently touch any conducting materials that are connected to the ground. Use an anti-static pad: When configuring the IKARPC-07A-A9, place it on an anti-static pad. This reduces the possibility of ESD damaging the IKARPC-07A-A9. Only handle the edges of the PCB: When handling the PCB, hold the PCB by the edges. 3.2 Installation Precautions When installing the flat panel PC, please follow the precautions listed below: Power turned off: When installing the flat panel PC, make sure the power is off. Failing to turn off the power may cause severe injury to the body and/or damage to the system. Certified Engineers: Only certified engineers should install and modify onboard functionalities. Page 15 IKARPC-07A-A9 In-vehicle Panel PC Anti-static Discharge: If a user open the rear panel of the flat panel PC, to configure the jumpers or plug in added peripheral devices, ground themselves first and wear an anti-static wristband. 3.3 Installation and Configuration Steps The following installation steps must be followed. Step 1: Unpack the system Step 2: Install a SD card Step 3: Install a SIM card Step 4: Mount the system Step 5: Connect peripheral devices Step 6: Power up the system Step 0: 3.4 SD Card Installation To install the SD card, follow the instructions below. Step 1: Remove the retention screw and lift the SD card slot access panel. Figure 3-1: SD Card Slot Access Panel Retention Screw Page 16 IKARPC-07A-A9 In-vehicle Panel PC Step 2: Locate the SD card slot. Insert the SD card into the slot to install it. To remove the SD card, push the SD card inward to release it. Figure 3-2: Install SD Card Step 3: Replace the SD card slot access panel. Step 0: 3.5 SIM Card Installation To install the SIM card, follow the instructions below. Step 1: Remove the retention screw and lift the SIM card slot access panel. Figure 3-3: SIM Card Slot Access Panel Retention Screw Page 17 IKARPC-07A-A9 In-vehicle Panel PC Step 2: Locate the SIM card slot. Insert the SIM card into the slot to install it. To remove the SIM card, slide the SIM card outward. Figure 3-4: Install SIM Card Step 3: Replace the SIM card slot access panel. Step 0: WARNING: The IKARPC-07A-A9 is not compatible with a micro-SIM (3FF) adapter or a nano-SIM (4FF) adapter. Please install a mini-SIM (2FF or Standard SIM) card for proper network connection. Page 18 IKARPC-07A-A9 In-vehicle Panel PC 3.6 Mounting the System The IKARPC-07A-A9 is VESA (Video Electronics Standards Association) compliant and can be mounted on a mounting device with a 75 mm interface pad. The IKARPC-07A-A9 VESA mount retention screw holes are shown in Figure 3-5. Refer to the installation documentation that came with the mounting device to mount the IKARPC-07A-A9. Figure 3-5: VESA Mount Retention Screw Holes NOTE: When purchasing the mounting device please ensure that it is VESA compliant and that the device has a 75 mm interface pad. If the mounting device is not VESA compliant it cannot be used to support the IKARPC-07A-A9. Page 19 IKARPC-07A-A9 In-vehicle Panel PC 3.7 External I/O Connectors This section provides an overview of the external I/O connectors of the IKARPC-07A-A9. 3.7.1 I/O Connector 1 (20-pin) The 20-pin I/O connector (IO 1) supports the following external peripheral devices: 1 x 10/100 Mbps LAN 1 x CAN 2.0 B 1 x OBD-II 1 x USB The pinouts for the IO 1 connector are listed in the figure and table below. Figure 3-6: IO 1 Connector Pinout Locations OBD-II CAN Bus Pin Description Pin Description OBD_CAN_H 11 ISO9141-2-K OBD_CAN_L 12 ISO9141-2-L GND 13 LAN_MDI0- 10/100 Mbps J2850_BUS+ 14 LAN_MDI0+ LAN J2850_BUS- 15 LAN_MDI1- GND 16 LAN_MDI1+ GND 17 GND GND 18 USB DATA- CAN_L 19 USB DATA+ 10 CAN_H 20 USB VCC (+5V) Table 3-1: IO 1 Connector Pinouts Page 20 OBD-II USB 2.0 IKARPC-07A-A9 In-vehicle Panel PC 3.7.2 I/O Connector 2 (24-pin) The 24-pin I/O connector (IO 2) supports the following external peripheral devices: 1 x Audio line-out (R+L) 1 x Audio line-in 1 x RS-232 2-bit digital input 2-bit digital output The pinouts for the IO 2 connector are listed in the figure and table below. Figure 3-7: IO 2 Connector Pinout Locations COM Digital Output Audio Line-out Pin Description Pin Description COM_TXD 13 COM_RXD NC 14 NC COM_RTS 15 COM_CTS COM_GND 16 NC NC 17 NC NC 18 DIO_GND DIO_OUT_1 19 DIO_IN_1 DIO_OUT_2 20 DIO_IN_2 DIO_GND 21 AUDIO_GND 10 AUDIO_GND 22 LINE_IN_L 11 HP_OUT_L 23 LINE_IN_R 12 HP_OUT_R 24 HP_DET_IN COM Digital Input Audio Line-in Table 3-2: IO 2 Connector Pinouts Page 21 IKARPC-07A-A9 In-vehicle Panel PC NOTE: In order to play sounds through the headset connected to the audio line-out connector, the “Switch to HeadPhone” option must be enabled. Please refer to Section 4.4.2 for detail information. 3.7.3 Video Input Connector The IKARPC-07A-A9 has one 8-pin video input connector on the rear panel. The pinouts for the video input connector are listed in the figure and table below. Figure 3-8: Video Input Connector PIN NO. DESCRIPTION VIDEO_GND_3 VIDEO_GND_2 VIDEO_GND_1 VIDEO_GND_0 VIDEO_AIN_3 VIDEO_AIN_2 VIDEO_AIN_1 VIDEO_AIN_0 Table 3-3: Video Input Connector Pinouts Page 22 IKARPC-07A-A9 In-vehicle Panel PC 3.7.4 Power Input Connection The IKARPC-07A-A9 has one 4-pin power input connector on the rear panel. The pinouts for the power input connector are listed in the figure and table below. Figure 3-9: Power Input Connector PIN NO. DESCRIPTION GND GND POWER ACC Table 3-4: Power Input Connector Pinouts The IKARPC-07A-A9 can use either ACC power or DC power from the power source. To use ACC power, connect the IKARPC-07A-A9 to the power source through the ACC power cable. See Figure 3-10. Figure 3-10: ACC Power Cable Page 23 IKARPC-07A-A9 In-vehicle Panel PC 3.7.5 USB Connector The IKARPC-07A-A9 has one USB 2.0 port on the right side panel. The USB port has a screw on the side for securing the USB devices, such as barcode scanners and smart card readers. The following diagram shows the USB port and the screw on the side panel. Figure 3-11: USB Connector 3.8 System Maintenance If the components of the IKARPC-07A-A9 fail, they must be replaced. Please contact the system reseller or vendor to purchase the replacement parts. NOTE: A user cannot replace a motherboard. If the motherboard fails it must be shipped back to IEI to be replaced. Please contact the system vendor, reseller or an IEI sales person directly. Page 24 IKARPC-07A-A9 In-vehicle Panel PC Chapter 4 Using the IKARPC-07A-A9 Page 25 IKARPC-07A-A9 In-vehicle Panel PC 4.1 Power-On/Off Procedure 4.1.1 Installation Checklist WARNING: Make sure a power supply with the correct input voltage is being fed into the system. Incorrect voltages applied to the system may cause damage to the internal electronic components and may also cause injury to the user. To power on the system please make sure of the following: The rear cover is installed All peripheral devices (antenna, serial communications devices etc.) are connected The system is securely mounted The power cables are plugged in 4.1.2 Power-on Procedure To power-on the IKARPC-07A-A9 please follow the steps below: Step 1: Connect the ACC power cable from the IKARPC-07A-A9 to the power source. See Section 3.7.4. Page 26 IKARPC-07A-A9 In-vehicle Panel PC Figure 4-1: Power Connector and Power Button Step 2: The system starts booting. When the main screen shows, press and slide the lock button on the screen to the unlock icon to unlock the system. 4.1.3 Power-off Procedure To power-off the IKARPC-07A-A9 please follow the steps below: Step 1: (1) Turn off the power source, or (2) Hold down the power button for 4~6 seconds to turn off the system. Step 2: The power-off confirmation window appears. Tap OK to turn off the system. Page 27 IKARPC-07A-A9 In-vehicle Panel PC Figure 4-2: Power-off Confirmation Screen 4.2 Home Screen The IKARPC-07A-A9 has multiple home screens allowing users to customize the screen with widgets, apps, folders and shortcuts. The following sections describe the basic technique to manage the home screen. 4.2.1 Navigation Buttons The IKARPC-07A-A9 Android home screen has three navigation buttons to control the system. The navigation buttons are shown in Figure 4-3 and described in Table 4-1. Figure 4-3: Navigation Buttons Page 28 IKARPC-07A-A9 In-vehicle Panel PC Buttons Description Back Tap to return to the previous screen. Home Tap to return to the home screen. Recent Apps Tap to display all the recently used applications. Table 4-1: Navigation Buttons 4.2.2 Multiple Home Screens Swipe left or right to switch. Long press an item on the home screen and when it vibrates drag the item to other screen. Figure 4-4: Multiple Home Screens 4.2.3 Adding Shortcut To add app or widget shortcuts on the home screen, follow the steps below. Step 1: Click the launcher button on the home screen to access the launcher/widget page. Page 29 IKARPC-07A-A9 In-vehicle Panel PC Figure 4-5: Launcher Button Step 2: Long press an app icon or a widget (click the WIDGETS tab to access the widgets page). When it vibrates, drag app/widget to the home screen. Figure 4-6: Launcher Page Page 30 IKARPC-07A-A9 In-vehicle Panel PC 4.2.4 Favorites Tray The Favorites tray at the side of each home screen allows users to keep the most important or frequently used shortcuts and folders. Long press an item on the home screen. When it vibrates, drag it to the favorites tray or move it from the favorites tray. The launcher button at the center of the favorites tray is fixed and can not be moved. Figure 4-7: Favorites Tray 4.2.5 Arranging Home Screen The items on the home screen can be moved and deleted. Long press an item on the home screen. When it vibrates, drag it where you want. To trash the item on the desktop, drag it to the “X” icon. Release the icon when it turns red. Page 31 IKARPC-07A-A9 In-vehicle Panel PC Figure 4-8: Move and Trash Item on Home Screen 4.3 Status Bar The status bar on the top of the screen (Figure 4-9) displays the pending notifications and status, such as battery level or signal strength. Figure 4-9: Status Bar Page 32 IKARPC-07A-A9 In-vehicle Panel PC Swipe down from the right of the status bar to view the setting shortcut. Figure 4-10: Status Bar – Setting Shortcut Swipe down from the left of the status bar to view notification details. Figure 4-11: Status Bar – Notification Page 33 IKARPC-07A-A9 In-vehicle Panel PC 4.4 Settings The Settings menu allows configuration to the IKARPC-07A-A9, such as Wi-Fi, volume, screen brightness, etc. To enter the Settings menu, tap Settings on the launcher page. 4.4.1 WIRELESS & NETWORKS Figure 4-12: Wireless and Networks Settings In the WIRELESS & NETWORKS field, the user can turn on/off the Wi-Fi and Bluetooth functions, and configure the network settings. Wi-Fi allows the user to turn on or turn off the Wi-Fi function. When the Wi-Fi function is turned on, tap this item to manage the access points. Bluetooth allows the user to turn on or turn off the Bluetooth function. When the Bluetooth function is turned on, tap this item to manage the Bluetooth connections. Page 34 IKARPC-07A-A9 In-vehicle Panel PC Data usage displays the data usage in a certain period of time. Ethernet configuration configures the Ethernet settings. 4.4.1.1 More Settings Figure 4-13: More Settings Menu After tapping More… in the WIRELESS & NETWORKS field, the user can configure the following network settings. Airplane mode turns on or turns off the airplane mode. VPN sets up and manages Virtual Private Networks (VPNs). Tethering & portable hotspot allows the user to set this device as a portable Wi-Fi hotspot and configure the hotspot settings. NFC turns on or turns off the NFC function. Page 35 IKARPC-07A-A9 In-vehicle Panel PC Android Beam allows the user to beam app content to another NFC-capable device when it is enabled. This item is available only when the NFC function is turned on. Mobile networks configure Mobile network settings, including data enabled, data roaming, access point names, use only 2G networks, and network operators. 4.4.2 Sound Figure 4-14: Sound Menu Use the Sound menu to configure the following items. Volumes allowing the user to adjust the volume of alarms, notifications, music, video, games and other media. Default notification sound sets up the notification ringtone. Touch sounds enables or disables playing a sound when making screen selection. Screen lock sound enables or disables playing a sound when unlocking the home screen. Page 36 IKARPC-07A-A9 In-vehicle Panel PC Switch to HeadPhone allowing the user to play sounds through the headset connected to the audio line-out connector of the IKARPC-07A-A9. 4.4.3 Display Figure 4-15: Display Menu Use the Display menu to configure the following items. Brightness adjusts the screen brightness. Wallpaper sets up the wallpaper. Sleep sets up the time of inactivity after which the screen turns to sleep mode. Daydream configures the screensaver settings. Font size sets up the font size. Wireless display turns on or turns off the wireless display function and configures its settings. Page 37 IKARPC-07A-A9 In-vehicle Panel PC 4.4.4 Storage The Storage menu displays the status of the internal storage and the installed SD card, and allows users to manage the data stored in them. Figure 4-16: Storage Menu Page 38 IKARPC-07A-A9 In-vehicle Panel PC 4.4.5 Apps The Apps menu displays the applications installed in the device, and allows users to manage them. Figure 4-17: Apps Menu 4.4.6 Users The Users menu allows the user to configure the owner information. Figure 4-18: Users Menu Page 39 IKARPC-07A-A9 In-vehicle Panel PC 4.4.7 Location Access Figure 4-19: Location Access Menu Use the Location access menu to configure the following items. Access to my location lets apps obtain the user’s location information. GPS satellites allows apps to use the GPS in the device to pinpoint the user’s location. This item is available only when the Access to my location item is enabled. Wi-Fi & mobile network location allows the apps to use Google’s location service to estimate the user’s location. This item is available only when the Access to my location item is enabled. Page 40 IKARPC-07A-A9 In-vehicle Panel PC 4.4.8 Security Figure 4-20: Security Menu Use the Security menu to configure the following items. Screen lock sets up the way to unlock the screen. Owner info configures the owner information to display on the lock screen. Make passwords visible allows the device to show password when typing. Device administrators displays or deactivates the device administrators. Unknown sources allows installation of applications from unknown sources. Trusted credentials displays trusted CA certificates. Install from SD card allows the user to install certificates from the SD card. Page 41 IKARPC-07A-A9 In-vehicle Panel PC 4.4.9 Language & Input Figure 4-21: Language & Input Menu Use the Language & input menu to configure the following items. Language sets up the language for IKARPC-07A-A9. Spell checker allows the user to enable the spell checking function and configure its settings. Personal dictionary configures the user dictionary. KEYBOARD & INPUT METHODS allows the user to set up the onscreen keyboard. Text-to-speech output configures the text-to-speech settings. Pointer speed sets up the pointer speed. Page 42 IKARPC-07A-A9 In-vehicle Panel PC 4.4.10 Backup & Reset Figure 4-22: Backup & Reset Menu Use the Back & reset menu to configure the following items. Factory data reset erases all data from the internal storage of the IKARPC-07A-A9. Page 43 IKARPC-07A-A9 In-vehicle Panel PC 4.4.11 Add account Tap Add account to start setting up an e-mail or corporate account. Figure 4-23: Add Account Menu 4.4.12 Date & Time Figure 4-24: Date & Time Menu Page 44 IKARPC-07A-A9 In-vehicle Panel PC Use the Date & time menu to configure the following items. Automatic date & time uses the network-provided time. Automatic time zone uses the network-provided time zone Select time zone sets up the time zone. Use 24-hour format uses the 24-hour format. Choose date format sets up the date format. 4.4.13 Accessibility Figure 4-25: Accessibility Menu Use the Accessibility menu to configure the following items. Magnification gesture allows the user to zoom in and out by triple-tapping the screen. Large text allows the device to display text in large font. Page 45 IKARPC-07A-A9 In-vehicle Panel PC Speak passwords allows the system to speak passwords. Text-to-speech output configures the text-to-speech settings. Touch & hold delay configures the touch & hold delay settings. Enhance web accessibility allows apps to install scripts from Google that make their web content more accessible. 4.4.14 About Tablet Figure 4-26: About Tablet Menu Use the About tablet menu to display the following items. Additional system updates allows the user to update the system from OTA (over-the-air) or from the SD card. Status displays the status of batteries, network, signal, etc. Legal information displays the legal information. Page 46 IKARPC-07A-A9 In-vehicle Panel PC Model number displays the model number. Android version displays the Android version. Baseband version displays the baseband version. Kernel version displays the kernal version. Build number displays the device build number. 4.5 File Management The IKARPC-07A-A9 provides a file management tool that allows users to manage files in the internal storage and external storage devices. Tap ES File Explorer on the application page to launch it. Figure 4-27: ES File Explorer Icon Page 47 IKARPC-07A-A9 In-vehicle Panel PC The ES File Explorer application user interface appears (Figure 4-28). Tap the storage folder. Figure 4-28: ES File Explorer Screen The user can view all the possible storage devices, including sdcard0: internal storage of the IKARPC-07A-A9 sdcard1: SD card connected to the IKARPC-07A-A9 usb1: USB storage device connected to the USB host connector on the side panel. Refer to Figure 1-5 for the connector location. Figure 4-29: Possible Storage Devices Page 48 IKARPC-07A-A9 In-vehicle Panel PC 4.6 Camera The IKARPC-07A-A9 equips with a 5-megapixel front-facing auto-focus camera, and also accepts a video device through the video input connector on the rear panel. To manage the built-in camera or the connected video device, tap Camera on the Launcher page. The user interface of the camera application appears. Figure 4-30 and Table 4-2 describe each button in detail. Figure 4-30: Camera Application After pressing the camera setting button on the top right side, the following three icons will appear in the middle of the screen. Adjust the settings if necessary. Switch between the front-facing camera and the video device connected to the video input connector on the rear panel. Adjust exposure Enable or disable image location information. Adjust the megapixel of the image size. Table 4-2: Camera Application–Camera Setting Buttons Page 49 IKARPC-07A-A9 In-vehicle Panel PC 4.7 System Update If there is a newer version of OS or firmware available, please follow the steps below to update the system. Step 3: If choosing to update the OS or firmware from the SD card, save the update file to an SD card and insert the SD card to the IKARPC-07A-A9 (see Section 3.4 for the SD card installation instruction). The user can also update from OTA (over-the-air) via Wi-Fi connection. Step 4: Access the Launcher page and click Settings. Scroll down to select About Tablet. Then, tap Additional system updates. Figure 4-31: Additional System Updates Step 5: The System Update page shows. Select either to update from OTA (over-the-air) or from the installed SD card. Page 50 IKARPC-07A-A9 In-vehicle Panel PC Chapter 5 Interface Connectors Page 51 IKARPC-07A-A9 In-vehicle Panel PC 5.1 Peripheral Interface Connectors The motherboard of the IKARPC-07A-A9 comes with a number of peripheral interface connectors and configuration jumpers. The connector locations are shown in Figure 5-1 and Figure 5-2. The Pin 1 locations of the on-board connectors are also indicated in the diagrams below. The connector pinouts for these connectors are listed in the following sections. Figure 5-1: Main Board Layout Diagram (Front Side) Figure 5-2: Main Board Layout Diagram (Solder Side) Page 52 IKARPC-07A-A9 In-vehicle Panel PC 5.2 Internal Peripheral Connectors Internal peripheral connectors are found on the motherboard and are only accessible when the motherboard is outside of the chassis. The table below shows a list of the peripheral interface connectors on the IKARPC-07A-A9 motherboard. Pinouts of these connectors can be found in the following sections. Connector Type Label Camera connector 24-pin FPC CAMERA1 GPS antenna connector Antenna connector GPS_ANT1 LED connector 12-pin FPC LED_BD2 LVDS connector 40-pin FPC CN2 Microphone connector 2-pin wafer MIC1 PCIe Mini card slot for 3.75G module Full-size PCIe Mini slot 3G_PCIE1 Power button Push button P_BTN1 Power input connector 4-pin Molex PW_IN1 Programming connector 5-pin header MCU1 JP2 Reset button Push button RST1 RFID antenna connector Antenna connector NFC_ANT1 NFC_ANT2 SD card socket SD card socket CN13 SIM card socket SIM card socket SIM1 Speaker connector 2-pin wafer SPK1 Touch panel connector 8-pin FPC CN10 USB ports External USB port USB1 USB2 Wi-Fi antenna connector Antenna connector WIFI_ANT1 Table 5-1: Peripheral Interface Connectors Page 53 IKARPC-07A-A9 In-vehicle Panel PC 5.2.1 Camera Connector (CAMERA1) PIN NO. DESCRIPTION PIN NO. DESCRIPTION GND 13 NC CIM_AF2V8 14 CIM_nRST NC 15 NC NC 16 NC GND 17 NC MIPI_D1_P 18 I2C_SDA1 MIPI_D1_N 19 I2C_SCL1 MIPI_CLK_P 20 CAMERA_PWD MIPI_CLK_N 21 CAMERA_MCLK 10 MIPI_D0_P 22 CIM_IO_1V5 11 MIPI_D0_N 23 CIM_IO1V8 12 NC 24 CIM_A2V8 Table 5-2: Camera Connector (CAMERA1) Pinouts 5.2.2 LED Connector (LED_BD2) PIN NO. DESCRIPTION VIO_3V3 VIO_3V3 VIO_3V3 NC I2C_SDA I2C_SCL GND LED_3.5G LED_WLAN 10 LED_BT 11 GND 12 GND Table 5-3: LED Connector (LED_BD2) Pinouts Page 54 IKARPC-07A-A9 In-vehicle Panel PC 5.2.3 LVDS Connector (CN2) PIN NO. DESCRIPTION PIN NO. DESCRIPTION LCM_LEDA 21 LCM_RIN3- LCM_LEDA 22 GND VLCD_VGH 23 LCM_CLK+ GND 24 LCM_CLK- GND 25 GND VLCD_VGL 26 LCM_RIN2+ GND 27 LCM_RIN2- VLCD_3V3 28 GND LCM_LEDK 29 LCM_RIN1+ 10 LCM_LEDK 30 LCM_RIN1- 11 GND 31 GND 12 VCC_LCD_AVDD 32 LCM_RIN0+ 13 GND 33 LCM_RIN0- 14 DIMO 34 GND 15 NC 35 VLCD_3V3 16 GND 36 LCM_nRST 17 NC 37 NC 18 NC 38 VLCD_3V3 19 GND 39 VLCD_3V3 20 LCM_RIN3+ 40 VLCD_VCOM Table 5-4: LVDS Connector (CN2) Pinouts 5.2.4 Microphone Connector (MIC1) PIN NO. DESCRIPTION MIC_IN_P MIC_IN_N Table 5-5: Microphone Connector (MIC1) Pinouts Page 55 IKARPC-07A-A9 In-vehicle Panel PC 5.2.5 Programming Connector (MCU1) PIN NO. DESCRIPTION MCLR MCU_PWR GND ICSPCLK2 ICSPDAT2 Table 5-6: Programming Connector (MCU1) Pinouts 5.2.6 Programming Connector (JP2) PIN NO. DESCRIPTION MCLR#-1 5V_OBD GND 2580_CLK 2580_DAT Table 5-7: Programming Connector (JP2) Pinouts 5.2.7 Speaker Connector (SPK1) PIN NO. DESCRIPTION SPK_OUT_P SPK_OUT_N Table 5-8: Speaker Connector (SPK1) Pinouts 5.2.8 Touch Panel Connector (CN10) PIN NO. DESCRIPTION TH_PWR GND CTP_DM5 CTP_DP5 Page 56 IKARPC-07A-A9 In-vehicle Panel PC CTP_RST# I2C_SCL3 I2C_SDA3 CTP_INTR Table 5-9: Touch Panel Connector (CN10) Pinouts Page 57 IKARPC-07A-A9 In-vehicle Panel PC Appendix A Regulatory Compliance Page 58 IKARPC-07A-A9 In-vehicle Panel PC DECLARATION OF CONFORMITY This equipment is in conformity with the following EU directives: EMC Directive 2004/108/EC Low-Voltage Directive 2006/95/EC RoHS II Directive 2011/65/EU Ecodesign Directive 2009/125/EC If the user modifies and/or install other devices in the equipment, the CE conformity declaration may no longer apply. If this equipment has telecommunications functionality, it also complies with the requirements of the R&TTE Directive 1999/5/EC. English IEI Integration Corp declares that this equipment is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Български [Bulgarian] IEI Integration Corp. декларира, че този оборудване е в съответствие със съществените изисквания и другите приложими правила на Директива 1999/5/ЕС. Česky [Czech] IEI Integration Corp tímto prohlašuje, že tento zařízení je ve shodě se základními požadavky a dalšími příslušnými ustanoveními směrnice 1999/5/ES. Dansk [Danish] IEI Integration Corp erklæ rer herved, at fø lgende udstyr overholder de væ sentlige krav og ø vrige relevante krav i direktiv 1999/5/EF. Deutsch [German] IEI Integration Corp, erklärt dieses Gerät entspricht den grundlegenden Anforderungen und den weiteren entsprechenden Vorgaben der Richtlinie 1999/5/EU. Eesti [Estonian] IEI Integration Corp deklareerib seadme seadme vastavust direktiivi 1999/5/EÜ põhinõuetele ja nimetatud direktiivist tulenevatele teistele asjakohastele sätetele. Page 59 IKARPC-07A-A9 In-vehicle Panel PC Español [Spanish] IEI Integration Corp declara que el equipo cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE. Ελληνική [Greek] IEI Integration Corp ΔΗΛΩΝΕΙ ΟΣΙ ΕΞΟΠΛΙΜΟ ΤΜΜΟΡΦΩΝΕΣΑΙ ΠΡΟ ΣΙ ΟΤΙΩΔΕΙ ΑΠΑΙΣΗΕΙ ΚΑΙ ΣΙ ΛΟΙΠΕ ΥΕΣΙΚΕ ΔΙΑΣΑΞΕΙ ΣΗ ΟΔΗΓΙΑ 1999/5/ΕΚ. Français [French] IEI Integration Corp déclare que l'appareil est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE. Italiano [Italian] IEI Integration Corp dichiara che questo apparecchio è conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE. Latviski [Latvian] IEI Integration Corp deklarē, ka iekārta atbilst būtiskajām prasībām un citiem ar to saistītajiem noteikumiem Direktīvas 1999/5/EK. Lietuvių [Lithuanian] IEI Integration Corp deklaruoja, kad šis įranga atitinka esminius reikalavimus ir kitas 1999/5/EB Direktyvos nuostatas. Nederlands [Dutch] IEI Integration Corp dat het toestel toestel in overeenstemming is met de essentiële eisen en de andere relevante bepalingen van richtlijn 1999/5/EG. Malti [Maltese] IEI Integration Corp jiddikjara li dan prodott jikkonforma mal-ħtiġijiet essenzjali u ma provvedimenti oħrajn relevanti li hemm fid-Dirrettiva 1999/5/EC. Magyar [Hungarian] IEI Integration Corp nyilatkozom, hogy a berendezés megfelel a vonatkozó alapvetõ követelményeknek és az 1999/5/EC irányelv egyéb elõírásainak. Polski [Polish] IEI Integration Corp oświadcza, że wyrobu jest zgodny z zasadniczymi wymogami oraz pozostałymi stosownymi postanowieniami Dyrektywy 1999/5/EC. Português [Portuguese] IEI Integration Corp declara que este equipamento está conforme com os requisitos essenciais e outras disposições da Directiva 1999/5/CE. Page 60 IKARPC-07A-A9 In-vehicle Panel PC Româna [Romanian] IEI Integration Corp declară că acest echipament este in conformitate cu cerinţele esenţiale şi cu celelalte prevederi relevante ale Directivei 1999/5/CE. Slovensko [Slovenian] IEI Integration Corp izjavlja, da je ta opreme v skladu z bistvenimi zahtevami in ostalimi relevantnimi določili direktive 1999/5/ES. Slovensky [Slovak] IEI Integration Corp týmto vyhlasuje, že zariadenia spĺňa základné požiadavky a všetky príslušné ustanovenia Smernice 1999/5/ES. Suomi [Finnish] IEI Integration Corp vakuuttaa täten että laitteet on direktiivin 1999/5/EY oleellisten vaatimusten ja sitä koskevien direktiivin muiden ehtojen mukainen. Svenska [Swedish] IEI Integration Corp förklarar att denna utrustningstyp står I överensstämmelse med de väsentliga egenskapskrav och övriga relevanta bestämmelser som framgår av direktiv 1999/5/EG. Page 61 IKARPC-07A-A9 In-vehicle Panel PC FCC WARNING This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and(2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/ TV technician for help. You are cautioned that any change or modifications to the equipment not expressly approve by the party responsible for compliance could void your authority to operate such equipment. IMPORTANT NOTE: FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Page 62 IKARPC-07A-A9 In-vehicle Panel PC Appendix B Safety Precautions Page 63 IKARPC-07A-A9 In-vehicle Panel PC WARNING: The precautions outlined in this chapter should be strictly followed. Failure to follow these precautions may result in permanent damage to the IKARPC-07A-A9. B.1 Safety Precautions Please follow the safety precautions outlined in the sections that follow: B.1.1 General Safety Precautions Please ensure the following safety precautions are adhered to at all times. Follow the electrostatic precautions outlined below whenever the IKARPC-07A-A9 is opened. Make sure the power is turned off and the power cord is disconnected whenever the IKARPC-07A-A9 is being installed, moved or modified. Do not apply voltage levels that exceed the specified voltage range. Doing so may cause fire and/or an electrical shock. Electric shocks can occur if the IKARPC-07A-A9 chassis is opened when the IKARPC-07A-A9 is running. Do not drop or insert any objects into the ventilation openings of the IKARPC-07A-A9. If considerable amounts of dust, water, or fluids enter the IKARPC-07A-A9, turn off the power supply immediately, unplug the power cord, and contact the IKARPC-07A-A9 vendor. DO NOT: Page 64 Drop the IKARPC-07A-A9 against a hard surface. Strike or exert excessive force onto the LCD panel. Touch any of the LCD panels with a sharp object In a site where the ambient temperature exceeds the rated temperature IKARPC-07A-A9 In-vehicle Panel PC B.1.2 Anti-static Precautions WARNING: Failure to take ESD precautions during the installation of the IKARPC-07A-A9 may result in permanent damage to the IKARPC-07A-A9 and severe injury to the user. Electrostatic discharge (ESD) can cause serious damage to electronic components, including the IKARPC-07A-A9. Dry climates are especially susceptible to ESD. It is therefore critical that whenever the IKARPC-07A-A9 is opened and any of the electrical components are handled, the following anti-static precautions are strictly adhered to. Wear an anti-static wristband: Wearing a simple anti-static wristband can help to prevent ESD from damaging any electrical component. Self-grounding: Before handling any electrical component, touch any grounded conducting material. During the time the electrical component is handled, frequently touch any conducting materials that are connected to the ground. Use an anti-static pad: When configuring or working with an electrical component, place it on an antic-static pad. This reduces the possibility of ESD damage. Only handle the edges of the electrical component: When handling the electrical component, hold the electrical component by its edges. Page 65 IKARPC-07A-A9 In-vehicle Panel PC B.1.3 Product Disposal CAUTION: Risk of explosion if battery is replaced by an incorrect type. Only certified engineers should replace the on-board battery. Dispose of used batteries according to instructions and local regulations. Outside the European Union - If you wish to dispose of used electrical and electronic products outside the European Union, please contact your local authority so as to comply with the correct disposal method. Within the European Union: EU-wide legislation, as implemented in each Member State, requires that waste electrical and electronic products carrying the mark (left) must be disposed of separately from normal household waste. This includes monitors and electrical accessories, such as signal cables or power cords. When you need to dispose of your display products, please follow the guidance of your local authority, or ask the shop where you purchased the product. The mark on electrical and electronic products only applies to the current European Union Member States. Please follow the national guidelines for electrical and electronic product disposal. B.2 Maintenance and Cleaning Precautions When maintaining or cleaning the IKARPC-07A-A9, please follow the guidelines below. B.2.1 Maintenance and Cleaning Prior to cleaning any part or component of the IKARPC-07A-A9, please read the details below. Page 66 IKARPC-07A-A9 In-vehicle Panel PC Except for the LCD panel, never spray or squirt liquids directly onto any other components. To clean the LCD panel, gently wipe it with a piece of soft dry cloth or a slightly moistened cloth. The interior of the IKARPC-07A-A9 does not require cleaning. Keep fluids away from the IKARPC-07A-A9 interior. Be cautious of all small removable components when vacuuming the IKARPC-07A-A9. Turn the IKARPC-07A-A9 off before cleaning the IKARPC-07A-A9. Never drop any objects or liquids through the openings of the IKARPC-07A-A9. Be cautious of any possible allergic reactions to solvents or chemicals used when cleaning the IKARPC-07A-A9. Avoid eating, drinking and smoking within vicinity of the IKARPC-07A-A9. B.2.2 Cleaning Tools Some components in the IKARPC-07A-A9 may only be cleaned using a product specifically designed for the purpose. In such case, the product will be explicitly mentioned in the cleaning tips. Below is a list of items to use when cleaning the IKARPC-07A-A9. Cloth – Although paper towels or tissues can be used, a soft, clean piece of cloth is recommended when cleaning the IKARPC-07A-A9. Water or rubbing alcohol – A cloth moistened with water or rubbing alcohol can be used to clean the IKARPC-07A-A9. Using solvents – The use of solvents is not recommended when cleaning the IKARPC-07A-A9 as they may damage the plastic parts. Vacuum cleaner – Using a vacuum specifically designed for computers is one of the best methods of cleaning the IKARPC-07A-A9. Dust and dirt can restrict the airflow in the IKARPC-07A-A9 and cause its circuitry to corrode. Cotton swabs - Cotton swaps moistened with rubbing alcohol or water are excellent tools for wiping hard to reach areas. Foam swabs - Whenever possible, it is best to use lint free swabs such as foam swabs for cleaning. Page 67 IKARPC-07A-A9 In-vehicle Panel PC Appendix C OBD-II Reader Command Page 68 IKARPC-07A-A9 In-vehicle Panel PC C.1 Select a Chip Initial Mode: UpDate F/W or RUN F/W AP sends query F/W receives query Enter Boot 0x3 Mode Enter RUN 0x3 Mode 10 11 12 13 14 15 16 17 18 19 C.2 Boot Mode Launch AP: P1618QP (Pic18F Bootloader ) Baud Rate:115200 C.3 Run Mode Any mode in Run mode AP sends query F/W receives query Enter 0x0 0x0 0x0 0x0 0x0 0x0 OBD-II Enter CAN 10 11 12 13 14 15 16 17 18 19 Standard V2.2.B Request mode & version Page 69 IKARPC-07A-A9 In-vehicle Panel PC F/W returns (after receiving query) Select a 0x0 Ver Ver 0x0 0x0 (1) (2) 0x1 0x0 0x0 Ver Ver 0x0 0x0 (1) (2) 0x1 0x0 0x0 Ver Ver 0x0 0x0 (1) (2) 0x1 0x0 mode to send Tele mode response CAN S mode response Enter Tele mode to 0x0 0x0 0x0 0x0 respond Enter CAN S mode to respond Page 70 10 11 12 13 14 15 16 17 18 19 IKARPC-07A-A9 In-vehicle Panel PC C.4 Into CAN_Standard V2.2.B (CAN standard) Sent by AP sends query F/W receives query 0x0A 0x0D xxx Baud 10 11 12 13 14 15 16 17 18 19 0x00 0x0 0x0 Reserved 0x00 TxIDE RTR ID(1 ID(2 ID(3 ID(4 D1 D2 D3 D4 D5 D6 D7 D8 0x0 0x0 Reserved B0 B1 M1I M1I M1 M1F M1 M1F M1 M1F M1F M1 M2I M2I M2I M2I D(3) D(4) F1I 1ID( F1I 1ID( F2I 2ID( 2ID( F2I D(1) D(2) D(3) D(4 D(1) 2) D(3) 4) D(1) 2) 3) D(4) CAN Set CAN baud Set to send by CAN Setup DLC M1ID(1) M1ID(2) menu M2 M2F M2 M2F1ID(4 F1I 1ID( F1I D(1) 2) D(3) M2F2ID(1) M2F M2F M2 M3F M3 M3F M3 M3F M3F M3 M3F RxI 0x0 0x0 2ID( 2ID( F2I 3ID( F3I 3ID( F3I 4ID( 4ID( F4I 4ID( DE 2) 3) D(4) 1) D(2) 3) D(4) 1) 2) D(3) 4) xxx xxx Read 0x0A 0x0D 0x0A 0x0D setting Setup read menu Set CAN F/W returns (after receiving query) 0x0A 0x0 baud 10 11 12 13 14 15 16 17 complete CAN query setup 0x0A 0x0 Page 71 18 19 IKARPC-07A-A9 In-vehicle Panel PC complete Menu setup 0x0A complete Read query 0x0 setup xxx TxID Bau RTR ID(1) ID(2) ID(3) ID(4) D1 D2 D3 D4 D5 D6 D7 D8 0x0A 0x0 B0 B1 DLC Read menu setup M1I M1I M1I M1I M1F M1F M1F M1F M1F M1F M1F M1F M2I M2I M2I M2I D(1) D(2) D(3) D(4) 1ID( 1ID( 1ID( 1ID( 2ID( 2ID( 2ID( 2ID( D(1) D(2) D(3) D(4) 1) 2) 3) 4) 1) 2) 3) 4) 0x0A 0x0 M2F M2F M2F M2F M2F M2F M2F M2F M3F M3F M3F M3F M3F M3F M3F M3F RxID 1ID( 1ID( 1ID( 1ID( 2ID( 2ID( 2ID( 2ID( 3ID( 3ID( 3ID( 3ID( 4ID( 4ID( 4ID( 4ID( 1) 2) 3) 4) 1) 2) 3) 4) 1) 2) 3) 4) 1) 2) 3) 4) xxx xxxx Read CAN complete xxx IDE Bau RTR B0 B1 DLC CAN starts 0x0A query 0x0 CAN query 0x0A error 0x0 CAN query succeed Page 72 0x0A 0x0 ID(1) ID(2) ID(3) ID(4) D1 D2 D3 D4 D5 D6 D7 D8 0x0A 0x0 IKARPC-07A-A9 In-vehicle Panel PC C.5 Into Telematics F/W:Telematics AP: Telematics V1.005 AP sends query F/W receives query Scan all 0x0 10 11 12 13 14 15 16 17 18 19 Scan all 0x0 Scan OBD-II Scan J1939 0x0 0x0 Scan FMS 0x0 OBD-II input PID-1 OBD-II input PID-2 OBD-II input PID-3 OBD-II input PID-4 Reserved Reserved Reserved Mo Mo PI PI 0x0 de- de- D-1 D-2 Mo Mo PI PI 0x0 de- de- D-1 D-2 Mo Mo PI PI 0x0 de- de- D-1 D-2 Mo Mo PI PI 0x0 de- de- D-1 D-2 Page 73 IKARPC-07A-A9 In-vehicle Panel PC Reserved J1939 input PSPF FMS input PSPF Version 0x0 -1 -2 -1 -2 0x0 -1 -2 -1 -2 0x0 F/W returns (after receiving query) No device is scanned Devices Scanned Page 74 10 11 12 13 14 15 16 17 18 19 IKARPC-07A-A9 In-vehicle Panel PC OBD packet format (ASCII code) OBD packet has five different format, they are: 1. CAN 11bits 250 2. CAN 29bits 250 3. CAN 11bits 500 4. CAN 29bits 500 5.Scanning Each format has its input code, they are: CAN 11bits 250: A CAN 29bits 250: B CAN 11bits 500: C CAN 29bits 500: D Scanning: Z Example 1: To get PID=0104 from CAN 29bits 500 format Input: D0104+CR (Use ASCII code as the input format of the firmware) Output: CAN 29bits 500,0104 18DAF111 08 0241040000000000+LF+CR (Use ASCII code as the input format of the firmware) □ ID number □ Key-in value □ ID □ Len □ Data Other Information: Data include eight different bytes Byte 1: Data include some return information. For example, 1. 18DAF110 08 064100BE1B301300 Byte1 is 06 followed by six non-zero values. 2. 18DAF110 08 0341043200000000 Byte1 is 03 followed by three non-zero values. Byte 2: Mode is related with the Key-in value. For example: 0104 18DAF110 08 0341043200000000 Key-in value is 01, Byte 2 value will change to 41. The main difference is: 0 means to send out by query side, 4 means to send out by receiver side Byte 3: PID is the same with the Key-in value. For example: 0104 18DAF110 08 0341043200000000 Key-in value is 04, Byte 3 value will be 04. Page 75 IKARPC-07A-A9 In-vehicle Panel PC Byte 4 define as A. (same with the PID code table on Wikipedia) Byte 5 define as B. (same with the PID code table on Wikipedia) Byte 6 define as C. (same with the PID code table on Wikipedia) Byte 7 define as D. (same with the PID code table on Wikipedia) As shown below: Example 2: To Scan Input: Z+CR (Use ASCII code as the input format of the firmware) Output: CAN 11bits 250,1 NO SUPPORT+LF+CR CAN 29bits 250,2 NO SUPPORT+LF+CR CAN 11bits 500,3 NO SUPPORT+LF+CR CAN 29bits 500,4 SUPPORT+LF+CR (Use ASCII code as the input format of the firmware) Page 76 IKARPC-07A-A9 In-vehicle Panel PC Appendix D Watchdog Timer Page 77 IKARPC-07A-A9 In-vehicle Panel PC NOTE: The following discussion applies to DOS. Contact IEI support or visit the IEI website for drivers for other operating systems. The Watchdog Timer is a hardware-based timer that attempts to restart the system when it stops working. The system may stop working because of external EMI or software bugs. The Watchdog Timer ensures that standalone systems like ATMs will automatically attempt to restart in the case of system problems. A BIOS function call (INT 15H) is used to control the Watchdog Timer. INT 15H: AH – 6FH Sub-function: AL – 2: Sets the Watchdog Timer’s period. BL: Time-out value (Its unit-second is dependent on the item “Watchdog Timer unit select” in CMOS setup). Table D-1: AH-6FH Sub-function Call sub-function 2 to set the time-out period of Watchdog Timer first. If the time-out value is not zero, the Watchdog Timer starts counting down. When the timer value reaches zero, the system resets. To ensure that this reset condition does not occur, calling sub-function 2 must periodically refresh the Watchdog Timer. However, the watchdog timer is disabled if the time-out value is set to zero. A tolerance of at least 10% must be maintained to avoid unknown routines within the operating system (DOS), such as disk I/O that can be very time-consuming. Page 78 IKARPC-07A-A9 In-vehicle Panel PC NOTE: The Watchdog Timer is activated through software. The software application that activates the Watchdog Timer must also deactivate it when closed. If the Watchdog Timer is not deactivated, the system will automatically restart after the Timer has finished its countdown. EXAMPLE PROGRAM: ; INITIAL TIMER PERIOD COUNTER W_LOOP: MOV AX, 6F02H ;setting the time-out value MOV BL, 30 ;time-out value is 48 seconds INT 15H ; ADD THE APPLICATION PROGRAM HERE CMP EXIT_AP, 1 ;is the application over? JNE W_LOOP ;No, restart the application MOV AX, 6F02H ;disable Watchdog Timer MOV BL, 0; INT 15H ; EXIT ; Page 79 IKARPC-07A-A9 In-vehicle Panel PC Appendix E Hazardous Materials Disclosure Page 80 IKARPC-07A-A9 In-vehicle Panel PC E.1 Hazardous Materials Disclosure Table for IPB Products Certified as RoHS Compliant Under 2002/95/EC Without Mercury The details provided in this appendix are to ensure that the product is compliant with the Peoples Republic of China (China) RoHS standards. The table below acknowledges the presences of small quantities of certain materials in the product, and is applicable to China RoHS only. A label will be placed on each product to indicate the estimated “Environmentally Friendly Use Period” (EFUP). This is an estimate of the number of years that these substances would “not leak out or undergo abrupt change.” This product may contain replaceable sub-assemblies/components which have a shorter EFUP such as batteries and lamps. These components will be separately marked. Please refer to the table on the next page. Page 81 IKARPC-07A-A9 In-vehicle Panel PC Part Name Toxic or Hazardous Substances and Elements Lead Mercury Cadmium Hexavalent Polybrominated Polybrominated (Pb) (Hg) (Cd) Chromium Biphenyls Diphenyl (CR(VI)) (PBB) Ethers (PBDE) Housing Display Printed Circuit Fan Assembly Power Supply Board Metal Fasteners Cable Assembly Assemblies Battery O: This toxic or hazardous substance is contained in all of the homogeneous materials for the part is below the limit requirement in SJ/T11363-2006 X: This toxic or hazardous substance is contained in at least one of the homogeneous materials for this part is above the limit requirement in SJ/T11363-2006 Page 82 IKARPC-07A-A9 In-vehicle Panel PC 此附件旨在确保本产品符合中国 RoHS 标准。以下表格标示此产品中某有毒物质的含量符 合中国 RoHS 标准规定的限量要求。 本产品上会附有”环境友好使用期限”的标签,此期限是估算这些物质”不会有泄漏或突变”的 年限。本产品可能包含有较短的环境友好使用期限的可替换元件,像是电池或灯管,这些元 件将会单独标示出来。 部件名称 有毒有害物质或元素 铅 汞 镉 六价铬 多溴联苯 多溴二苯 (Pb) (Hg) (Cd) (CR(VI)) (PBB) 醚 (PBDE) 壳体 显示 印刷电路板 金属螺帽 电缆组装 风扇组装 电力供应组装 电池 O: 表示该有毒有害物质在该部件所有物质材料中的含量均在 SJ/T11363-2006 标准规定的限量要求以下。 X: 表示该有毒有害物质至少在该部件的某一均质材料中的含量超出 SJ/T11363-2006 标准规定的限量要求。 Page 83
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Page Count : 93 Language : zh-TW Tagged PDF : Yes Title : IKARPC-07A-A9 In-vehicle Panel PC Author : 簡炳煌 Subject : IKARPC-07A-A9 Creator : Microsoft® Office Word 2007 Create Date : 2016:07:26 18:03:21 Modify Date : 2016:07:26 18:03:21 Producer : Microsoft® Office Word 2007EXIF Metadata provided by EXIF.tools