INTO TECH LIVE480 DVR BOARD User Manual USERS MANUAL 2
INTO-TECH Inc. DVR BOARD USERS MANUAL 2
Contents
- 1. USERS MANUAL 1
- 2. USERS MANUAL 2
USERS MANUAL 2
Ⅱ User Manual - DVR AVI Backup Manager 03 AVI Backup Manager 1-2 Selecting Data for Backup Click [Load Data] from top right of GUI AVI Backup Manager Select the date you wish to backup AVI Backup Manager converts the recorded data into AVI file format to replay the image conveniently using Windows Media Player. Then click [LOAD] icon. 1-1 AVI Backup To backup recorded data in to AVI format simply double click the AVI Backup Manager icon. 1-3 Backup by Channels Select the channel you wish to backup. Channel icon turns green when selected. 38 39 Ⅱ User Manual - DVR AVI Backup Manager 1-4. Backup Time Selection Select the location of the directory to backup data and click [OK]. Enter the time you wish to start backup from Time Bar. Recorded data is indicated in red. Click the start time and click [A->B] icon. Start time will automatically appear as below. Click the end time and click [A->B] icon. End time will automatically appear as below. ※ AVI BackUp Manager can only convert files up to one hour. Backup data time is only indicated when the difference between start time & end time is less than one hour. AVI Backup Processing Windows prompt message indicating AVI Converting End will automatically appear. You have successfully converted your data for storage. 1-5 Backup Data Converting Click [Converting] icon after entering the limits of the backup time in reference. 40 41 Ⅱ User Manual - Backup Manager 1-6 Play Backup Data using Windows Media-Player 04.Backup Manager Our website offers utilities that users can Download & install AVI Formula Codec V 1.0 from www.intotech.co.kr, DownLoad -> Util section to properly replay stored data. Using Intotech Backup Manager recorded images(* iva. data) can be managed efficiently or quickly backup to CD using this software. You can now replay all AVI format data using your Windows Media Player . Media Player should replay stored data as seen below. [Backup Manager Detailed Information] 1 ) Backup Manager illustrates recorded data by date, channel and time. 2 ) The following icons are used to help manage your recorded data. : Transfer data to Backup List. : Remove data from Backup List. : Remove all data from Backup List. : Search screen will be displayed in (YUV) screen mode. (Default setting) : Search screen will be displayed in (RGB) screen mode. Graphic Card may not support YUV mode YUV is the default setting. (Please convert to RGB mode when transferring or removing data .) : Play Backup Data. : Start Backup. 42 : Stop Backup. 43 Ⅱ User Manual - Backup Manager Add data to Backup List illustrated below. 1-2 Click Backup Manager icon to run program. 1-2 Select date & time from Data List to Backup. Ex) Indicates 2004/ 2/ 7 CH2 10 o’clock. Backup folder & Progress Time Bar is indicated as follows. : Select directory to backup : Direct backup to CD (CD-RW required) 1-3 Move selected data from Data List to Backup List. Click ( ) icon to move data from Data List to Backup List. 1-1 Backup Manager HDD Backup 1-4 Click( ) icon to setup backup directory. 1-5 Choose HDD to backup and click [OK]. Example selects C: Drive. 44 45 Ⅱ User Manual - Backup Manager 1-6 Click ( )icon to start backup.. 1-7 Message is displayed after completion. 2-3 Move selected data from Data List to Backup List. Click( )icon to move data. 2 CD Backup 2-3 Click( ) icon. 2-4 Click [CD – RW] and click [Contain Backup Player]. (NOTE : The Contain Backup Player(7MB) must be checked.) 2-1 Click Backup Manager icon and run program. 2-2 Select date & time from Data List to Backup. Ex) Indicates 2004/ 2/ 7 CH2 10 o lock. 2-5 Click( 46 ) icon to start backup 47 Ⅱ User Manual - Backup Manager 2-6 Message is displayed after completion. 3 Play HDD Backup Data 3-1 Click Backup Manager and run program. 3-4 Search Data screen illustrated below. a. Recorded data is shown in red. ⌒ 3-5 Choose date you want to playback and Click [Load]. 3-2 Click [Play] icon to search Backup Data Directory. 48 3-3 Select RGB Mode and select directory and Click [OK]. 49 Ⅱ User Manual - Backup Manager 3-6 Click icon to exit from playback mode and return to Backup Manager. ※Set CD recorder failed. : Conflict with CD-RW settings. ※Not Enough Hdd Disk Free Space to Create CD IMAGE : HDD must have enough free space to CD backup data onto CD. ※The call failed because IMAPI has not been opened with Open. : Your Operating System(O/S) does not support CD Backup. If you have any further tech support issues, please contact your local Intotech DVR dealer. 4. Play CD Backup Data ·Insert CD to CDROM. (Run CDROM Drive -> Backup Player -> Click [ ] icon.) ·Select CDROM directory and click [OK]. [The following Error Messages appear usually means the following errors.] [Error Message] ※There is no medium in the burner : There is no CD inside CD-RW drive. ※ If you want to Backup CD. Please reboot or end process ‘imap.exe’ : Please reboot PC OR stop imap.exe’ by force from Windows Task Manager. 50 51 Ⅱ User Manual - NetClient Interface 4 NetClient Interface 01. Intotech Net-Client Interface NetClient Program is able to receive images from DVR Server using the Internet. NetClient functions: Display & recording, camera control from remote site and other features that we will illustrated in this document. Save Icon: Save selected channels as JPEG file. Print Icon: Print the selected channels in various modes. REC Icon: Record the image of selected channels. All Icon: Select all channels to record. 1-2 Screen Partition Panel Support 7 kinds of various screen partition, full-screen and sequence rotation display mode. 1-3 Pan/Tilt Control Panel Pan / Tilt / Zoom / Focus control is supported from remote site when DVR Server is using Pan/Tilt camera. Control sensitivity can be configured in Control Panel. Only broadband Internet users can use Pan/Tilt control, Modem users cannot use this feature. 1-1 Control Panel The Control Panel can search program, open connection setup, save & print still images and record server image from remote PC where NetClient is installed. Save Icon Connection Setup Icon → REC Icon → 52 → Search Icon 1-4 Network Type Selection Panel Select [LAN] from Network Type Selection Panel when using broadband connection and Select [Modem] when using Modem. 1-5 Camera Selection Panel Click specific channel from Camera Selection Panel to enlarge and view image. → Print Icon → All Icon Search Icon: Runs search program. Connection Setup Icon: Run [Connecting & Configuration Management] used for internet access. Run [Modem Connection] used for internet access . 53 Ⅱ User Manual - NetClient Interface 1-6 Internet User Real-Time Surveillance Click [LAN] from [Network Type Selection Panel] and view real-time from remote site. Click [Connection] from [Control Panel] and [Connecting & Configuration Management] screen will appear. Register the Server IP Address and connect using the registered IP. - Server is using Dynamic IP Register for DHS Service,(http://www.chainip.com )*Refer to Annex. Select [Dynamic IP] from [Connecting & Configuration Management] and insert the ID from DHS Server. Insert the ID & Password which is registered in the Server program [User Management] and click [Register]. 2. Channel Connection Register the Server and use the registered server to connect to each channel. 2-1 Server Registration - Server has Fixed IP(Static IP) Select the [Fixed IP] from [Connecting & Configuration Management] insert the Server Name, IP Address, ID & Password(Insert the ID & Password which is registered in the Server program [User Management].) and click [Register]. 2-2 Connection Select [Connect Mangement] and insert the Server Name and Server Channel to each camera channel. 54 55 Ⅱ User Manual - NetClient Interface 3 Group Connection Group Connection enable users the convenience of connecting specific channels from different servers at once. 3-1 Group Setup 3-2 Group Organization. Click the Server you wish to include in Group from Server List. Specific channels can be selected after you select Server Name from Server List. Select the specific Server channel you wish to include in Group and click [Add Group]. In one group, users are allowed to register up to 16CH from different Servers. - Register Group Name Goto [Management of group] and click [Add Group]. Insert the Group Name you wish to use and click [OK]. Group Name will be displayed on left side of Group List. Select the Group Name from Group List. 56 57 Ⅱ User Manual - NetClient Interface 3-3 Group Connection Click [Connect group] to connect. (It will take about 10~30 sec to connect to all channels.) 4 Modem User Connection Setup 4-1 Modem Setup Select [Modem] icon from [Network Type Selection Panel] to connect from remote site using Modem. Click [Connection] icon from [Control Panel] to run [Modem Connect] window. [Modem Connection] window is initialized. Insert Telephone No.(Insert the number assigned to DVR Server. Insert “ ” and Telephone No. to add the waiting time while the line is being dialed. E.g.: 9w0232851525), ID & Password, (Insert the ID & Password which is registered in the Server program, [User Management].) Select the camera channel number and click [Connect]. You can only access one channel at one time using Modem. In order to change to different channel, click [Disconnect] from [Modem Connect] window, change channel and reconnect. Note: If You are not using 56K Internet Access, you do not need to access Internet Service Provider. 4-2 Configuration Setup The modem model name will appear when you click [Configuration]. During intial setup, the Model Name needs to be confirmed to complete registration, thereafter, this step will be bypassed. 58 Click [Properties] to view General/Advanced default setup. Use default when use of modem. 59 Ⅱ User Manual - NetClient Interface 5 Search 5-1 Remote Search ※Broadband: To search recorded images from remote site, click [LAN] from [Network Type Selection Panel] when using Broadband Internet connection to connect to Server. Click [Search] Icon from [Control Panel] to run Search program. ※ Remote Search [Remote Search using Internet] - Server Connection: Insert Server, Connection Port, ID & Password, Channel number and click [Connect]. - Data Load: Click the date from calendar and click [Load Data]. ※ Modem: To search recorded images from remote site, click [Modem] from [Network Type Selection Panel] when using Modem to connect to Server. Click [Search] Icon from [Control Panel] to run Search program. - Control Panel: Consists of [Surveillance Mode] icon, [Local Search] icon, [Remote Search] icon, [Save Still Image] icon and [Print Still Image] icon. Surveillance Mode Icon: Converts to Surveillance Mode. Local Search Icon: Runs [Local Search] window. Remote Search Icon: Runs [Remote Search] window. 60 - Insert telephone no. of Server, ID & Password, channel number and click [Connect]. - Image Output Control Panel: Consists of [Play] & [Stop]. - Screen Partition Panel: Maximum 4CH search & playback is available from remote site using Broadband. 1CH search & playback is available from remote site using Modem. - Search Data Process Bar ※ Hour Bar: If there is recorded data in selected hour, recorded data is indicated in red from minute bar ※ Minute Bar: Minutes of recorded data is indicated from 0~59min. and recorded data is indicated in red. 61 Ⅱ User Manual - WebClient 02. WebClient WebClient can receive the images from remote site & view through the internet without installing any other program. 5-2 Local Search Click [Local Search] from Search Mode, Surface Mode Window will appear. Click [OK] to run Local Search program. 1. Connection ※[Local Search] from NetClient Program is similar to the functions from Main Program (Server Program). Refer to the Server Program Manual (Chapter 2: Search Program) for information regarding other featured functions. 1-1 For Fixed IP Users(Static IP) Insert the Server IP Address in Internet Web Browser. e.g.: Insert as http://61.107.32.182:26540 if the Server IP Address is 61.107.32.182. 62 63 Ⅱ User Manual - WebClient Message as above will appear if this is your first time connecting through Internet Web Browser. Clickbutton and it will take a few seconds to load the WebClient program. For Dynamic IP User Insert the ID you have been given then click [Login] button. IP address & Port No. will be automatically retained in the WebClient program. You will be asked to enter ID & Password again for security. Click [Connect] to view image. Message as above will appear if it is your first time connecting through Internet Web Browser. Click button and it will take a few seconds to load the WebClient program. IP address & Port No. will be automatically retained in the WebClient program. You will be asked to enter ID & Password again for security. Click [Connect] to view image. 64 65 Ⅱ User Manual - WebClient 1-2 Display Mode Display Mode: There are two modes available: YUV Mode & RGB Mode. RGB Mode uses more overload than YUV Mode. If you are not able to view the images using YUV Mode, update the Graphics Card Driver and if problem persists check whether the Graphics Card supports YUV Mode 1-3 Screen Partition There are 7 variations of screen partitioning that is supported according to camera number. 1-4 Connection Connect to All Channel (All Mode ) WebClient program is set to All Mode as default. If you wish to view all channels from the Server, click [Connect] button while it is set to [All Mode]. Connect to specific channel ( Select Mode) If you wish to view specific channels from the Server(Not all channels), convert to [Select Mode] and click [Connect] button. Displayed above, channel selection panel will appear on the right side of WebClient program. Select the specific channel and click [Start] button. 66 67 ※Annex 1. I/O DEVICE ※ I/O DEVICE 9.1 Input/Output Device Input/Output Control is available from DVR Program [Configuration] [Event] and it consists of Sensor, (A)ction/Digital Output. 9.3.1 NC [NC] stands for“Normal Close”If this button is selected, Normally(Event is not occurred) the circuit will be closed. General Sensors are“Normal Close”but in case of special sensor which is “Normal Close”type, do not select [NC]. 9.3.2 Sensor Port Control Confirm the video channel of sensor you want to insert, then click [Enable the Sensor]. Setup the sensor port which is connected to SmartDVR I/O Board by each channel. Can use sensor port regardless of digital output number. 9.2. Channel Selection & Apply All Select channel after preparation of Input/Output Board and other Surveillance equipment. All the surveillance equipment is connected to every channel, and to control all channel, click [Apply All] after setup of [Sensor], [Action/Digital Output], [Digital Output], [Warning Sound], [Duration]. 68 9.3 Sensor Input [Sensor] is equivalent to Digital Input. When there is input signal from outside to selected channel(Sensor is activated, e.g.: When use of fire alarm, sensor is activated when occurrence of fire), selected channel will recognize as occurrence of event. 9.4 Action//Digital Output Action//Digital Output - [Enable Event Recording] will automatically record the image when sensor is activated after an occurrence of event. [Enable the warning sound] will make a warning sound from the speaker. 69 ※Annex 2. Dynamic IP User Manual 9.5 Digital Output Confirm the video channel of digital output you want to insert, then setup [Digital Output]. Setup the Digital Output Number by each channel. Can use digital output port regardless of sensor input number. 9.6 Warning Sound Select Wave file to change warning sound. ※ Dynamic IP User Manual 1-1 DHS(Dynamic Host Service) DHS service helps support Dynamic IP remote access. Internet Service Provider frequently change IP address when using a standard broadband connection. DHS Hosting Service keeps track of Server ID and updates IP address periodically to support remote access without the need of a Static IP Address. 1-2 DHS Service Registration - Connect to http://chainip.com from Internet Web Browser. 9.7 Duration Time Setup duration time of Warning Sound using mouse wheel. 2 Click [Join Now] and enter information on registration form. 3 Our server manager will contact you within 24 hours after the registration is complete. 4 Connect to http://chainip.com and login with the ID that has been assigned to you. 70 71 ※Annex 3. IP Router ※ IP Router User Manual For Customers who use Routers inside their intranet environment for PC & DVR internet access. 1 The following steps will guide you to allocate Private IP address to DVR Server. Goto [Start] – [Control Panel] – [My Network Places] 2 Click the right mouse button from [Local Area Connection] in LAN or High Speed Internet. 3 Click [Properties]. 4 Double click [Internet Protocol (TCP/IP)]. 5 Manually input private IP address, do not select [Automatically Obtain IP Address.] If you do not know your IP address: Click [Start] – Click [Run] and enter cmd or command and press OK. A black DOS screen will appear, then type ipconfig’ and press Enter. Your IP Address, Submask and GateWay will be displayed, use these IP addresses and enter into Step 5 - Insert ‘168.126.63.1’ for DNS. 6 After the setup is complete, you must access your router to set Port Forwarding. - Refer to Router manual since Port forwarding function is different for every Router. Port forwarding Port No. : 20408, 26540 72 7 Refer to Dynamic IP Manual after the above setup is complete. FCC NOTICE THIS DEVICE COMPLIES WITH PART 15 OF THE FCC FULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITION: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDERSIRED OPERATION. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communication. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures : - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit difference from that to which the receiver is connected. - Consult the dealer of an experienced radio/TV technician for help. NOTE : The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Page Count : 19 Has XFA : No XMP Toolkit : XMP toolkit 2.9.1-14, framework 1.6 About : uuid:fa77e8f9-e7ab-4824-949f-b19340fc6b3d Modify Date : 2005:06:06 15:40:23-04:00 Create Date : 2005:06:06 15:40:12-04:00 Metadata Date : 2005:06:06 15:40:23-04:00 Document ID : uuid:910776e5-1cda-458f-9a09-4eafd44da06b Format : application/pdf Title : ÀÎÅõÅظŴº¾ó³»Áö72p-¿µ¹® Creator : QuarkXPress 3.3K: AdobePS 8.7.2 .6š Author : 0 Producer : ezPDFGate with Acrobat DistillerEXIF Metadata provided by EXIF.tools