| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3998672 |
| Application ID | jsoAy58UPm347gEwl0tWeQ== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 83.37kB (1042067 bits) |
| Date Submitted | 2018-09-10 00:00:00 |
| Date Available | 2018-09-10 00:00:00 |
| Creation Date | 2018-09-06 16:57:30 |
| Producing Software | Microsoft® Word 2016 |
| Document Lastmod | 2018-09-06 16:57:30 |
| Document Title | Users Manual |
| Document Creator | Microsoft® Word 2016 |
| Document Author: | bailang |
AI-Link
WIFI-V897 Series
IEEE 802.11 2X2 MIMO ac/a/b/g/n WiFi
Features：
➢ Reserving System
IEEE Std. 802.11a
IEEE Std. 802.11b
IEEE Std. 802.11g
IEEE Std. 802.11n
IEEE Std. 802.11ac
➢ Chip Solution
Marvell 88W8897
Model
Standard
Rate
Channel
POWER
WIFI-2-V897EA1
IEEE 802.11a/b/g/n/ac
866.7Mbps
2.4G/5G
5V
Sichuan AI-Link Technology Co.,Ltd
Add: Anzhou,Industrial park,Mianyang,Sichuan,China
Fax : +86-0816-2416943
http://www.changhong.com
WIFI-2-V897EA1
IEEE 802.11a/b/g/n/ac 2T2R
Feedback of customer’s Confirmation
We accept the specification after Confirmed
Customer name
Customer signature
Confirmation Date
Please feed back this paper and first paper after your signature by the address,thanks!
ADD： Anzhou,Industrial park,Mianyang,Sichuan,China
Factory： Sichuan iLink Technology Co.,Ltd.
Approved
Checked
Designed
Product
WiFi Module
Bai lang
Qian zijin
Fan xijun
Model
WIFI-2-V897EA1
Date
2018-05-18
Record of Modification
Sichuan AI-Link Technology Co., Ltd.
page 2 of 23
WIFI-2-V897EA1
IEEE 802.11a/b/g/n/ac 2T2R
No
Date of
modification
20180518
Main content of
modification
Reason of
modification
Serial number of
modification
Fan xijun
Confirmed for the
first time
Sichuan AI-Link Technology Co., Ltd.
Confirm
page 3 of 23
WIFI-2-V897EA1
IEEE 802.11a/b/g/n/ac 2T2R
1. Introduction
WIFI-2-V897EA1 is based on Marvell 88W8897,complied with IEEE 802.11a/b/g/n/ac. The Module is a
highly integrated MAC/BBP and 2.4/5GHz RF/PA/LNA single chip which supports a 866.7Mbps PHY
rate. The Module is designed to support standard-based features in the areas of security, quality of
service, and international regulations, giving end users the greatest performance anytime and in any
circumstance. This documentation describes the engineering requirements specification.
■ IEEE802.11ac (draft)compliant,2x2 MIMO spatial stream multiplexing with data rates up to
MCS9(866.7Mbps)
1.1 RF module Overview
The general HW architecture for the module is shown in Figure 1. This WLAN Module design is based
on Marvell 88W8897. It is a highly integrated single-chip MIMO(Multiple In Multiple Out) Wireless LAN
(WLAN) network interface controller complying with the 802.11ac specification over SDIO,PCIE,USB
and UART interface.. It combines a MAC, a 2T2R capable baseband, and RF in a single chip. The
88w8897 provides a complete solution for a high throughput performance wireless client .
Figure 1 WIFI-2-V897EA1 Block Diagram
Sichuan AI-Link Technology Co., Ltd.
page 4 of 23
WIFI-2-V897EA1
IEEE 802.11a/b/g/n/ac 2T2R
Note: Interface supports and combinations as shown below:
Scenario
WLAN
Firmware
Download I/F
PCIe
PCIe
Firmware
Download
Mode
Serial
Configuration
CON[3:0]=b'1
110
NOTE:
PCIe v3.0(2.5Gbps) interface
USB 2.0 interface with LPM support
1.2 Specification reference
This specification is based on additional references listed below.
_ IEEE Std. 802.11a
_ IEEE Std. 802.11b
_ IEEE Std. 802.11g
_ IEEE Std. 802.11n
_ IEEE Std. 802.11ac
Sichuan AI-Link Technology Co., Ltd.
page 5 of 23
WIFI-2-V897EA1
IEEE 802.11a/b/g/n/ac 2T2R
1.3 System Functions
Table1: General Specification as below:
Main Chipset
Marvell 88W8897
Operating Frequency
2.4G/5G
WiFi Standard
Form factor
802.11a/b/g/n/ac(2x2)
11b: DBPSK, DQPSK and CCK and DSSS
11a/g: BPSK, QPSK, 16QAM, 64QAM and OFDM
11n: BPSK, QPSK, 16QAM, 64QAM and OFDM
11ac: BPSK, QPSK, 16QAM, 64QAM,256QAM and OFDM
11b:1, 2, 5.5 and 11Mbps
11a/g:6, 9, 12, 18, 24, 36, 48 and 54 Mbps
11n: MCS0~15, up to 300Mbps
11ac: MCS0~9, Nss=2, up to 866.7Mbps
LGA
Host Interface
PCIE,USB
PCB Stack
6-layers design
Dimension
Typical，30.0mmx 26.8mm
Antenna
External antenna
Operation Temperature
-20℃ to +50℃
Storage Temperature
-20℃ to +50℃
Operation Voltage
DC 3.3V ,
PCIe interfaces support for WLAN
Modulation
Data rates
Interfaces
1、
Systems
Sichuan AI-Link Technology Co., Ltd.
Drip-in WLAN Linux drivers are Android ready and
validated on Android based systems.
2、Support for Linux kernel versions up to 2.6.32.
page 6 of 23
WIFI-2-V897EA1
IEEE 802.11a/b/g/n/ac 2T2R
2. Mechanical Specification
Typical Dimension (L x W): 30.0mmx 26.8mm
Pin feet from left to right
PIN
10
11
12
13
14
15
16
17
18
Description
WAKEn
VDD33
GPIO0/CLK_REQ
GND
WLAN_IRQ(O)/WAKE_UP
N.C
PCIE_CLKREQ_N
N.C
GND
N.C
PCIE_CLE_N
N.C
PCIE_CLK_P
N.C
GND
N.C
N.C
GND
Sichuan AI-Link Technology Co., Ltd.
PIN
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
Description
N.C
PCIE_DISABLE
GND
PCIE_PERST
PCIE_TX_N
VDD3.3V
PCIE_TX_P
GND
GND
N.C
GND
N.C
PCIE_RX_N
N.C
PCIE_RX_P
GND
GND
USB_DM
PIN
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
Description
GND
USB_DP
VDD3.3V
GND
VDD3.3V
N.C
GND
LED_WLAN
GPIO[10]/NFC_NOT_ALLOWED
LED_WPAN
GPIO[11]/NFC_ACTIVE
N.C
N.C
GND
PDN
+3.3Vaux
page 7 of 23
WIFI-2-V897EA1
IEEE 802.11a/b/g/n/ac 2T2R
Notes：
1. PCIE Impedance targets: Single-ended Z of 60 ohms +- 15% . Differential
Impedance of ~100 ohm +- 20%.
2. USB Impedance targets: D+/D- are differential and should have 90ohms
impedance.
3. Product Picture
TOP VIEW
Sichuan AI-Link Technology Co., Ltd.
BOTTOM VIEW
page 8 of 23
WIFI-2-V897EA1
IEEE 802.11a/b/g/n/ac 2T2R
4. Electrical Specification
This Specification is based-on conductive DVT testing result. The extreme condition include overall
temperature (-20℃,+25℃,+50℃) and overall voltage (3.3V +/-15% ,).
4. 1 Absolute Maximum Ratings:
Symbol
Parameter
Pin73/ VIO
Host I/O power supply
Min.
Typ.
Max. Unit
1.8
2.5
3.3
1.8
3.3
3.3
2.2
3.0
4.0
2.2
4.0
4.0
Pin5/ 3V3_VBAT
LDO VBAT input
Pin72/ 3V3_USB
LDO USB VBAT input
3.3
4.0
LDO RF VBAT input
3.3
4.0
Min.
Typ.
Pin5/ 3V3_VBAT
1.8V/3.3V digital I/O
SDIO power supply
LDO VBAT input
1.62
2.25
2.97
1.62
2.97
2.7
1.8
2.5
3.3
1.8
3.3
3.3
1.98
2.75
3.63
1.98
3.63
5.0
Pin72/ 3V3_USB
LDO USB VBAT input
2.97
3.3
3.63
LDO RF VBAT input
2.97
3.3
3.63
Pin44/ VIO_SD
Pin4/ 3V3_RF
SDIO power supply
Remarks
4. 2 Recommended Operating Conditions:
Symbol
Parameter
Pin73/ VIO
1.8V/2.5V/3.3V digital
I/O power supply
Pin44/ VIO_SD
Pin4/ 3V3_RF
Sichuan AI-Link Technology Co., Ltd.
Max. Unit
Remarks
page 9 of 23
WIFI-2-V897EA1
IEEE 802.11a/b/g/n/ac 2T2R
4. 3 IEEE 802.11a Section:
Items
Specification
Mode
Channel
Data rate
TX Characteristics
1. Power Levels
1) 13dBm Target (For Each antenna port)
2. Spectrum Mask @ Target Power
1) at fc +/-11MHz
2) at fc +/-20MHz
3) at fc > +/-30MHz
3. Constellation Error(EVM) @ Target Power
1) 6Mbps
2) 9Mbps
3) 12Mbps
4) 18Mbps
5) 24Mbps
6) 36Mbps
7) 48Mbps
8) 54Mbps
4. Frequency Error
RX Characteristics
5. Minimum Input Level Sensitivity(each chain)
1) 6Mbps (PER ≦10%)
2) 9Mbps (PER ≦10%)
3) 12Mbps (PER ≦10%)
4) 18Mbps (PER ≦10%)
5) 24Mbps (PER ≦10%)
6) 36Mbps (PER ≦10%)
7) 48Mbps (PER ≦10%)
8) 54Mbps (PER ≦10%)
6. Maximum Input Level (PER ≦10%)
Sichuan AI-Link Technology Co., Ltd.
Contents
IEEE802.11a
BPSK, QPSK, 16QAM, 64QAM and OFDM
CH36 to CH165
6, 9, 12, 18, 24, 36, 48, 54Mbps
Min.
Typ.
Max.
Unit
Remark
12
14
dBm
-20
-28
-40
dBr
dBr
dBr
-20
Min.
Typ.
-5
-8
-10
-13
-16
-19
-22
-25
20
Max.
dB
dB
dB
dB
dB
dB
dB
dB
ppm
Unit
-84
-83
-81
-79
-76
-72
-68
-67
dBm
dBm
dBm
dBm
dBm
dBm
dBm
dBm
dBm
-30
page 10 of 23
WIFI-2-V897EA1
IEEE 802.11a/b/g/n/ac 2T2R
4.4 IEEE 802.11b Section:
Items
Contents
Specification
Mode
Channel
Data rate
TX Characteristics
1. Power Levels(Calibrated)
1) 13dBm Target (For Each antenna port)
2. Spectrum Mask @ Target Power
1) fc +/-11MHz to +/-22MHz
2) fc > +/-22MHz
3. Constellation Error(EVM) @ Target Power
1) 1Mbps
2) 2Mbps
3) 5.5Mbps
4) 11Mbps
4. Frequency Error
RX Characteristics
5. Minimum Input Level Sensitivity(each chain)
1) 1Mbps (FER ≦8%)
2) 2Mbps (FER ≦8%)
3) 5.5Mbps (FER ≦8%)
4) 11Mbps (FER ≦8%)
6. Maximum Input Level (FER ≦8%)
Sichuan AI-Link Technology Co., Ltd.
Min.
IEEE802.11b
DBPSK, DQPSK and CCK and DSSS
CH1 to CH13
1, 2, 5.5, 11Mbps
Typ.
Max.
Unit
Remark
11
14
dBm
-30
-50
dBr
dBr
-20
Min.
-20
Typ.
-10
-10
-10
-10
20
Max.
dB
dB
dB
dB
ppm
Unit
-10
-83
-83
-83
-83
dBm
dBm
dBm
dBm
dBm
page 11 of 23
WIFI-2-V897EA1
IEEE 802.11a/b/g/n/ac 2T2R
4. 5 IEEE 802.11g Section:
Items
Specification
Mode
Channel
Data rate
TX Characteristics
1. Power Levels
1) 13dBm Target (For Each antenna port)
2. Spectrum Mask @ Target Power
1) at fc +/-11MHz
2) at fc +/-20MHz
3) at fc > +/-30MHz
3. Constellation Error(EVM) @ Target Power
1) 6Mbps
2) 9Mbps
3) 12Mbps
4) 18Mbps
5) 24Mbps
6) 36Mbps
7) 48Mbps
8) 54Mbps
4. Frequency Error
RX Characteristics
5. Minimum Input Level Sensitivity(each chain)
1) 6Mbps (PER ≦10%)
2) 9Mbps (PER ≦10%)
3) 12Mbps (PER ≦10%)
4) 18Mbps (PER ≦10%)
5) 24Mbps (PER ≦10%)
6) 36Mbps (PER ≦10%)
7) 48Mbps (PER ≦10%)
8) 54Mbps (PER ≦10%)
6. Maximum Input Level (PER ≦10%)
Sichuan AI-Link Technology Co., Ltd.
Contents
IEEE802.11g
BPSK, QPSK, 16QAM, 64QAM and OFDM
CH1 to CH13
6, 9, 12, 18, 24, 36, 48, 54Mbps
Min.
Typ.
Max.
Unit
Remark
10
14
dBm
-20
-28
-40
dBr
dBr
dBr
-10
Min.
Typ.
-5
-8
-10
-13
-16
-19
-22
-25
10
Max.
dB
dB
dB
dB
dB
dB
dB
dB
ppm
Unit
-30
-89
-87
-86
-84
-81
-77
-73
-72
dBm
dBm
dBm
dBm
dBm
dBm
dBm
dBm
dBm
page 12 of 23
WIFI-2-V897EA1
IEEE 802.11a/b/g/n/ac 2T2R
4.6 IEEE 802.11n HT20 Section:
Items
Specification
Mode
Channel
Data rate (MCS index)
TX Characteristics
1. Power Levels
1) 13dBm Target (For Each antenna port) @ 2.4G
2) 13dBm Target (For Each antenna port) @ 5G
2. Spectrum Mask @ Target Power
1) at fc +/-11MHz
2) at fc +/-20MHz
3) at fc > +/-30MHz
3. Constellation Error(EVM) @ Target Power
1) MCS0
2) MCS1
3) MCS2
4) MCS3
5) MCS4
6) MCS5
7) MCS6
8) MCS7
4. Frequency Error
1) IEEE802.11n HT20 @ 2.4G
2) IEEE802.11n HT20 @ 5G
RX Characteristics
5. Minimum Input Level Sensitivity(each chain)
1) MCS0 (PER ≦10%)
2) MCS1 (PER ≦10%)
3) MCS2 (PER ≦10%)
4) MCS3 (PER ≦10%)
5) MCS4 (PER ≦10%)
6) MCS5 (PER ≦10%)
7) MCS6 (PER ≦10%)
8) MCS7 (PER ≦10%)
6. Maximum Input Level (PER ≦10%)
1) IEEE802.11n HT20 @ 2.4G
2) IEEE802.11n HT20 @ 5G
Sichuan AI-Link Technology Co., Ltd.
Contents
IEEE802.11n HT20 @ 2.4G
IEEE802.11n HT20 @ 5G
BPSK, QPSK, 16QAM, 64QAM and OFDM
CH1 to CH13 @ 2.4G
CH36 to CH165 @ 5G
MCS0/1/2/3/4/5/6/7/8/9/10/11/12/13/14/15
Min.
Typ.
Max.
Unit
Remark
10
10
14
14
dBm
dBm
-20
-28
-45
dBr
dBr
dBr
-5
-10
-13
-16
-19
-22
-25
-28
dB
dB
dB
dB
dB
dB
dB
dB
-10
-10
Min.
Typ.
10
10
Max.
ppm
ppm
Unit
-85
-82
-80
-77
-73
-69
-68
-67
dBm
dBm
dBm
dBm
dBm
dBm
dBm
dBm
-20
-30
dBm
dBm
page 13 of 23
WIFI-2-V897EA1
IEEE 802.11a/b/g/n/ac 2T2R
4.7 IEEE 802.11n HT40 Section:
Items
Specification
Mode
Channel
Data rate (MCS index)
TX Characteristics
1. Power Levels (Calibrated)
1) 12dBm Target (For Each antenna port) @ 2.4G
2) 12dBm Target (For Each antenna port) @ 5G
2. Spectrum Mask @ Target Power
1) at fc +/-21MHz
2) at fc +/-40MHz
3) at fc > +/-60MHz
3. Constellation Error(EVM) @ Target Power
1) MCS0
2) MCS1
3) MCS2
4) MCS3
5) MCS4
6) MCS5
7) MCS6
8) MCS7
4. Frequency Error
1) IEEE802.11n HT20 @ 2.4G
2) IEEE802.11n HT20 @ 5G
RX Characteristics
5. Minimum Input Level Sensitivity(each chain)
1) MCS0 (PER ≦10%)
2) MCS1 (PER ≦10%)
3) MCS2 (PER ≦10%)
4) MCS3 (PER ≦10%)
5) MCS4 (PER ≦10%)
6) MCS5 (PER ≦10%)
7) MCS6 (PER ≦10%)
8) MCS7 (PER ≦10%)
6. Maximum Input Level(PER ≦10%)
1) IEEE802.11n HT20 @ 2.4G
2) IEEE802.11n HT20 @ 5G
Sichuan AI-Link Technology Co., Ltd.
Contents
IEEE802.11n HT40 @ 2.4G
IEEE802.11n HT40 @ 5G
BPSK, QPSK, 16QAM, 64QAM and OFDM
CH3 to CH11 @ 2.4G
CH38 to CH163 @ 5G
MCS0/1/2/3/4/5/6/7/8/9/10/11/12/13/14/15
Min.
Typ.
Max.
Unit
Remark
10
10
13
13
dBm
dBm
-20
-28
-45
dBr
dBr
dBr
-5
-10
-13
-16
-19
-22
-25
-28
dB
dB
dB
dB
dB
dB
dB
dB
-10
-12
Min.
Typ.
10
12
Max.
ppm
ppm
Unit
-82
-79
-77
-74
-70
-66
-65
-64
dBm
dBm
dBm
dBm
dBm
dBm
dBm
dBm
-20
-30
dBm
dBm
page 14 of 23
WIFI-2-V897EA1
IEEE 802.11a/b/g/n/ac 2T2R
4.8 IEEE 802.11ac20/ac40 Section:
Items
Specification
Mode
Channel
Data rate (MCS index)
TX Characteristics
1. Power Levels (Calibrated)
1) 12dBm Target (For Each antenna port)
2. Spectrum Mask @ Target Power
1) at fc +/-11MHz /20MHz/30MHz
2) at fc +/-21MHz /40MHz/60MHz
3) at fc +/-41MHz /80MHz/120MHz
3. Constellation Error(EVM) @ Target Power
1) MCS0
2) MCS1
3) MCS2
4) MCS3
5) MCS4
6) MCS5
7) MCS6
8) MCS7
9) MCS8
10) MCS9
4. Frequency Error
RX Characteristics
5. Minimum Input Level Sensitivity(each chain)
1) MCS0 (PER ≦10%)
2) MCS1 (PER ≦10%)
3) MCS2 (PER ≦10%)
4) MCS3 (PER ≦10%)
5) MCS4 (PER ≦10%)
6) MCS5 (PER ≦10%)
7) MCS6 (PER ≦10%)
8) MCS7 (PER ≦10%)
9) MCS8 (PER ≦10%)
10) MCS9 (PER ≦10%)
6. Maximum Input Level(PER ≦10%)
Sichuan AI-Link Technology Co., Ltd.
Contents
IEEE802.11ac20/ac40
BPSK, QPSK, 16QAM, 64QAM ,256QAM and OFDM
CH42 to CH157
MCS0/1/2/3/4/5/6/7/8/9
Min.
Typ.
Max.
Unit
Remark
10
10
13
13
-20
-28
-40
dBm
-10
Min.
Typ.
-5
-10
-13
-16
-19
-22
-25
-27
-30
-32
10
Max.
VHT80
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
ppm
Unit
-76
-73
-71
-68
-65
-63
-61
-59
dBm
dBm
dBm
dBm
dBm
dBm
dBm
dBm
dBm
dBm
dBm
-30
-56
-54
dBr
dBr
dBr
page 15 of 23
WIFI-2-V897EA1
IEEE 802.11a/b/g/n/ac 2T2R
4.9 Clock Specifications
Symbol
Parameter
Min.
Typ.
CLK
Clock Frequency Range
THIGH
Clock high time
32 or 32.768
-50ppm
40
TLOW
Clock low time
TRISE
TFALL
Max.
Unit
32 or 32.768
+50ppm
40
ns
Clock rise time
ns
Clock fall time
ns
32 or 32.768
4.10 Reset Configuration
WIFI-2-V897EA1 is reset to its default operating state under the following conditions:
Power-on reset (POR)
Software/Firmware reset
External pin reset (RESETn)
4.11Power up Timing Sequence
Sichuan AI-Link Technology Co., Ltd.
page 16 of 23
KHz
ns
WIFI-2-V897EA1
IEEE 802.11a/b/g/n/ac 2T2R
5. Interfaces
5.1.1 Host Interface
Sichuan AI-Link Technology Co., Ltd.
page 17 of 23
WIFI-2-V897EA1
IEEE 802.11a/b/g/n/ac 2T2R
5.1.2 PCI Express Interface
Sichuan AI-Link Technology Co., Ltd.
page 18 of 23
WIFI-2-V897EA1
IEEE 802.11a/b/g/n/ac 2T2R
5.2 PCI Express Interface
5.2.1 Interface Signal Description
Symbol
UI
Parameter
Unit interval
Each UI 400 ps±300 PPM
UI does not account for SSC dictated variations
Differential peak-to-peak output voltage
VTX_DIFFpp=2*|VTX_D+ - VTX_D-|
De-emphasized differential output voltage(radio)
Minimum Tx eye width
Maximum time between jitter median and
maximum deviation from median
Min.
Typ.
Max.
Unit
399.98
400-
400.12
ps
0.8
1.2
-3.0
0.75
-3.5
-4.0
dB
UI
0.125
UI
0.125
UI
100
mV
25
mV
20
mV
600
mV
3.6
90
mA
50
UI
20
UI
20
UI
RLTX-DIFF
Minimum time spent in electrical idle
Maximum time to transition to a valid electrical
idle after sending an electrical idle ordered set
Maximum time to transition to valid Tx
specifications after leaving an electrical condition
Differential return loss
10
dB
RLTX-CM
Common mode return loss
dB
7.5
200
nF
ms
VTX-DIFFpp
VTX-DE-RATIO
TRX-EYE
TRX-EYE-MEDIAN-_
MAX-JIT
TTX-RISE
TTX-FALL
TTX-CM-DC-ACTIVE-
D+/D- Tx output rise/fall time
TTX-DC-CM
Absolute delta of DC common mode voltage
during L0 and electrical idle
Absolute delta of DC common mode voltage
between D+ and DElectrical idle differential peak output voltage
Voltage change allowed during receiver
detection
Tx DC common mode voltage
TTX-SHORT
Tx short circuit current limit
IDLE-DELTA
TTX-CM-DC-LINE-DE
LTA
TTX-IDLE-DIFFp
TTX-RCV-DETECT
TTX-IDLE-MIN
TTX-IDLE-SET-TO-ID
LE
TTX-IDLE-TO-DIFF-D
TA
CTX
TCrosstalk
AC coupling capacitor
Crosstalk random timeout
Sichuan AI-Link Technology Co., Ltd.
page 19 of 23
WIFI-2-V897EA1
IEEE 802.11a/b/g/n/ac 2T2R
5.2.2 Differential Rx Output Electricals
Symbol
Parameter
Min.
Typ.
Max.
Unit
VRX-CM-ACp
Unit interval
Each UI 400 ps±300 PPM
UI does not account for SSC dictated variations
Differential peak-to-peak output voltage
VRX_DIFFpp=2*|VTX_D+ - VTX_D-|
Minimum Tx eye width
Maximum time between jitter median and
maximum deviation from median
AC peak common mode input voltage
RLRX-DIFF
Differential return loss
10
dB
RLRX-CM
Common mode return loss
dB
DC differential input impedance
80
100
120
Ω
DC input impedance
40
50
60
Ω
Powered down DC input impedance positive
50
Powered down DC input impedance negative
kΩ
Electrical idle detect threshold
65
175
UI
10
UI
-2
dB
UI
VRX-DIFFpp
TRX-EYE
TRX-EYE-MEDIAN-_
MAX-JIT
ZRX-DIFF-DC
ZRX-DC
ZRX-HIGH-IMP-DC-P
OS
ZRX-HIGH-IMP-DC-N
EG
VRX-IDLE-DET-DIFF
pp
TRX-IDLE-DET-DIFFENTERTIME
LRX-SKEW
Unexpected electrical idle enter detect threshold
integration time
Total skew
399.98
400-
400.12
ps
0.175
1.2
0.4
UI
0.3
UI
150
mV
5.3 USB Interface
5.3.1 USB 2.0 Device Interface Description
USB 2.0 Specification
Pin Name
Pin Name
Pin72/3V3_USB
VBUS
GND
Pin70/USB_DP
D+
Pin69/USB_DM
D-
Sichuan AI-Link Technology Co., Ltd.
Description
USB Bus Power Supply
On-board regulator regulates voltage from VBUS level to
voltage levels used by USB PHY
USB Bus Ground
Common ground on SoC device
USB Data Plus
One of the differential data pair
USB Data Minus
One of the differential data pair
page 20 of 23
WIFI-2-V897EA1
IEEE 802.11a/b/g/n/ac 2T2R
ftware Requirements
The driver supports the following operating systems: Linux, Microsoft Windows XP, Vista and Win7.
Mfg. software tool version is ：
MFG-W8897-MF-WIFI-BT-NFC-NO-CAL-BRG-FC-WIN-X86-2.1.0.76-15.2.7.p22
Sichuan AI-Link Technology Co., Ltd.
page 21 of 23
WIFI-2-V897USA1
IEEE 802.11a/b/g/n/ac 2T2R
7. Statement：
FCC
Radiation Exposure Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
FCC Radiation Exposure Statement
The modular can be installed or integrated in mobile or fix devices only. This modular be installed in any portable device, for example, USB dongle like
transmitters is forbidden. This modular complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be
collocated or operating in conjunction with antenna or transmitter. If the FCC identification number is not visible when the module is installed inside another
device, then the outside of the device into which the module is installed must also display label referring to the enclosed module. This exterior label can use
wording such as the following:” Contains Transmitter Module FCC ID: 2ACHK- V897EA1 Or Contains FCC ID: 2ACHK- V897EA1 when the module is installed
inside another device, the user manual of this device must contain below warning statements;1. This device complies with Part 15 of the FCC Rules. Operation
Sichuan AI-Link Technology Co., Ltd.
page 22 of 23
WIFI-2-V897USA1
IEEE 802.11a/b/g/n/ac 2T2R
is subject to the following two conditions :(1) This device may not cause harmful interference.(2) This device must accept any interference received, including
interference that may undesired operation.2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's
authority to operate the equipment. The devices must be installed and used in strict accordance with the manufacturer’s instructions as described in the user
documentation that comes with the product. This device is intended only for OEM integrators under the followingconditions:1) The antenna must be installed
such that 20 cm is maintained between the antenna and user.2) The transmitter module may not be co-located with any other transmitter or antenna. Module
Antenna Type:
For 2.4GHz : Antenna 0: 1.8dBi, Antenna 1: 2.4dBi
For 5GHz: Antenna 0: 6dBi, Antenna 1: 6dBi
Sichuan AI-Link Technology Co., Ltd.
page 23 of 23
Source Exif Data:
File Type : PDF
File Type Extension : pdf
MIME Type : application/pdf
PDF Version : 1.5
Linearized : No
Page Count : 23
Language : zh-CN
Tagged PDF : Yes
XMP Toolkit : 3.1-701
Producer : Microsoft® Word 2016
Title : 技术规格书模板文件
Creator : bailang
Creator Tool : Microsoft® Word 2016
Create Date : 2018:09:06 16:57:30+08:00
Modify Date : 2018:09:06 16:57:30+08:00
Document ID : uuid:E2FD9B6E-1D80-43FA-984E-AF04FE546224
Instance ID : uuid:E2FD9B6E-1D80-43FA-984E-AF04FE546224
Author : bailang
EXIF Metadata provided by EXIF.tools