Identec Solutions ILR-IQ350SAT GPS-SAT User Manual
Identec Solutions AG GPS-SAT
User manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2372759 |
| Application ID | kB9s2nP4iTcZYFgXnASW1w== |
| Document Description | User manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 243.6kB (3045028 bits) |
| Date Submitted | 2014-08-29 00:00:00 |
| Date Available | 2015-02-26 00:00:00 |
| Creation Date | 2014-08-27 10:40:40 |
| Producing Software | Mac OS X 10.9.4 Quartz PDFContext |
| Document Lastmod | 2014-08-27 10:40:40 |
| Document Title | Microsoft Word - M_EN_i-Q350GPS SAT_V10_W updated 3.docx |
| Document Creator | Word |
i-Q350LX GPS –SAT SensorSMART™ Installation and Operation Manual Preliminary VISIBILITY DELIVERED. i-Q350LX GPS -SAT USER MANUAL Proprietary Notice This document contains confidential information proprietary to IDENTEC SOLUTIONS and may not be used or disclosed to other parties in whole or in part without the prior written authorization from IDENTEC SOLUTIONS. Disclaimer and Limitation of Liability IDENTEC SOLUTIONS AG and its affiliates, subsidiaries, officers, directors, employees and agents do not make any express or implied warranties or representations with respect to such information including, without limitation, warranties as to non-infringement, reliability, suitability for a particular purpose and accuracy. IDENTEC SOLUTIONS shall not under any circumstances be liable to any person for any special, incidental, indirect or consequential damages, including without limitation, damages resulting from use of or reliance on information presented herein, or loss of profits or revenues or costs of replacement goods, even if informed in advance of the possibility of such damages. Customer shall be solely responsible for proper selection, application, and use of Products, as well as the incorporation/integration of Products into other equipment or systems. Customer shall indemnify and hold IDENTEC SOLUTIONS harmless from and against any and all damages, liabilities, claims, or expenses (including reasonable attorneys' fees) arising out of or relating to (i) improper selection, application, installation, use or incorporation/integration of Products; or (ii) infringement of any patent, trademark, copyright or other third party interest arising out of IDENTEC SOLUTIONS' compliance with any of Customer's designs, specifications, or instructions. Trademarks “IDENTEC SOLUTIONS”, “Intelligent Long Range”, “ILR” and the stylized “i” are registered trademarks and “iCARD”, “i-PORT”, “i-LINKS”, “Visibility Delivered.” are trademarks of IDENTEC SOLUTIONS, Inc. and/or IDENTEC SOLUTIONS AG. Copyright Notice Copyright © 2014 IDENTEC SOLUTIONS. All rights reserved. No part of this document may be reproduced or transmitted in any form by any means, photographic, electronic, mechanical or otherwise, or used in any information storage and retrieval system, without the prior written permission of IDENTEC SOLUTIONS. Issue 1.0 / July 2014 Subject to alteration without prior notice. Printed in Austria CONTACT US EUROPE HEAD OFFICE USA GERMANY NORWAY AUSTRALIA +43 5577 87387-0 IDENTEC SOLUTIONS AG IDENTEC SOLUTIONS, INC. IDENTEC SOLUTIONS IDENTEC SOLUTIONS AS IDENTEC SOLUTIONS sales@identecsolutions.com Millennium Park 2 Preston Plaza DEUTSCHLAND GMBH Kartheia 3 AUSTRALIA AND 6890 Lustenau 17950 Preston Rd., Suite 200 AURUM 05 / Ost 4626 Kristiansand NEW ZEALAND P/L NORTH AMERICA Austria Dallas, Texas 75252 Goldbeckstraße 5 Norway Riverview Business Park 72 +1 866 402-4211 Tel +43 5577 87387-0 USA 69493 Hirschberg Tel +47 38 00 35 30 Maribyrnong St, Footscray VIC sales@identecsolutions.com Fax +43 5577 87387-15 Tel +1 972 535 4439 Germany Fax +47 38 00 35 31 3011 Australia Fax +1 469 424 0404 Tel +49 6201 99 57-0 Tel +61 3 9396 8900 Fax +49 6201 99 57-99 Fax +61 3 9689 2493 VISIBILITY DELIVERED. PAGE 2 OF 31 i-Q350LX GPS -SAT USER MANUAL Radio Frequency Compliance Statement IDENTEC SOLUTIONS is the responsible party for the compliance of the following devices: MODEL: Region/Country EUROPE: USA: Organization EC FCC Canada: Industry Canada i-Q350LX GPS -SAT Marking CE FCC ID OO4-ILR-IQ350SAT Contains FCC ID: L2V-STX3 IC:3538A-IQ350SAT The user(s) of these products are cautioned to only use accessories and peripherals approved, in advance, by IDENTEC SOLUTIONS. The use of accessories and peripherals, other than those approved by IDENTEC SOLUTIONS, or unauthorized changes to approved products, may void the compliance of these products and may result in the loss of the user(s) authority to operate the equipment. European Notification according R&TTE Directive This equipment complies to Art. 6.4 of R&TTE Directive (2006/95/EU, 2004/108/EC, 1999/5/EC). It is tested for compliance with the following standards: EN 300 220-1, ETSI EN 300 220-2, ETSI EN 301 489-1, ETSI EN 301 489-3, EN 60950-1:2006 + A11:2009 + A1:2010 + A12:2011 USA Notification This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/ TV technician for help. VISIBILITY DELIVERED. PAGE 3 OF 31 i-Q350LX GPS -SAT USER MANUAL CAUTION: Any changes or modifications not expressly approved by the grantee of this device could void the user's authority to operate the equipment. Canada Certification This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device Le présent appareil est conforme aux CNR d‘Industrie Canada applicables aux appareils radio exempts de licence. L‘exploitation est autorisée aux deux conditions suivantes: (1) l‘appareil ne doit pas produire de brouillage, et (2) l‘utilisateur de l‘appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d‘en compromettre le fonctionnement. VISIBILITY DELIVERED. PAGE 4 OF 31 i-Q350LX GPS -SAT USER MANUAL ATEX Certification Equipment or protected system intended for use in potentially explosive atmosphere directive 94/9/EC. Compliance with the essential health and safety Requirements has been assured by compliance with the following standards: EN 60079-0:2009, EN 60079-0:2006, EN60079-11:2007 EPS 13 ATEX ???? II 1G Ex ia T4 IIC Ga II 1 G II 1D Ex ia IIIC T135 °C Da IECEx Certification The electrical apparatus and any acceptable variations to it specified in the schedule of this certificate and the identified documents, was found to comply with the following standards: IEC 60079-0: 2004, IEC 60079-0: 2007-10, IEC 60079-11: 2006 IECEx EPS ?? Type of Protection Ex i Marking Ex ia T4 IIC Ga Ex ia IIIC T135 °C Da Special conditions for safe use – ATEX and IECEx WARNING - Electrostatic Hazard: Do not install in locations with increased electrostatic charge such as close to ventilations systems or electric drives. WARNING - Electrostatic Hazard: Clean plastic Tag surface only with a damp cloth. Do not use solvents. WARNING - This product should be installed by personnel trained in installation of equipment in Hazardous Locations and meet the representative country’s National Electrical Code. VISIBILITY DELIVERED. PAGE 5 OF 31 i-Q350LX GPS -SAT USER MANUAL This product contains components that are sensitive to electrostatic discharges. Please observe the special instructions for their protection. Incorrect handling can damage the unit and cause the invalidation of the warranty. Minimum safety precautions against electrostatic discharge: • Establish earth contact before you touch the unit. For example, touch the earthing screw on the unit. Even better: Use an antistatic ribbon and earth yourself permanently for the time you handle the unit. • Avoid unnecessary contact with the unit connectors and assemblies inside the unit. • Only open the unit if the operational settings (as described in the manual) expressly require this. • Use antistatic tools for the setting of the unit. (Warning: Do not touch life-threatening voltages with these tools). • Do not store unit and components without protective packaging. • Only remove unit and components from the packaging immediately prior to installation. These notes are not sufficient to guarantee complete protection from electrostatic discharges! We recommend the use of suitable protective equipment. VISIBILITY DELIVERED. PAGE 6 OF 31 i-Q350LX GPS -SAT USER MANUAL Contents 1. PREFACE ....................................................................................................................... 10 1.1. 1.2. 1.3. 1.4. 1.5. 1.6. PREPARATIONS ................................................................................................................. 10 SCOPE OF THIS DOCUMENT .................................................................................................. 10 RESPONSIBILITY ................................................................................................................ 10 UPDATES ......................................................................................................................... 10 SCOPE OF DELIVERY—VISUAL INSPECTION ............................................................................... 10 ASSOCIATED DOCUMENTS .................................................................................................... 10 2. INTRODUCTION ........................................................................................................... 11 2.1. FUNDAMENTALS ................................................................................................................ 11 2.2. COMPONENT OVERVIEW ...................................................................................................... 11 2.3. SYSTEM COMPONENTS—SENSORS .......................................................................................... 12 2.3.1. i-Q350 Tags ................................................................................................................ 12 2.3.2. Polarization of Sensors ................................................................................................ 13 2.4. SYSTEM COMPONENTS—READERS .......................................................................................... 14 2.4.1. i-PORT M350-2 ........................................................................................................... 14 2.5. SYSTEM COMPONENTS—ANTENNAS ........................................................................................ 15 2.5.1. Elliptical Polarized Antennas ......................................................................................... 15 2.5.2. Linear Polarized Antennas ............................................................................................ 16 2.5.3. 1/2-Wave Whip Antenna .............................................................................................. 17 2.5.4. 1-Wave Rod Antenna .................................................................................................. 18 TAG MOUNTING TECHNIQUES ...................................................................................... 19 1.1 1.2 1.3 1.4 2.6. DIMENSIONAL DRAWING ...................................................................................................... 19 MOUNTING HOLE PATTERN .................................................................................................... 19 MOUNTING TO CONTAINER .................................................................................................... 20 SCREWS ........................................................................................................................... 21 TAG IDENTIFICATION.......................................................................................................... 22 3. INITIAL OPERATION, CONFIGURATION OF THE TAG.................................................. 23 3.1. 3.2. 3.1. 3.2. 3.3. 3.4. 3.5. GENERAL ......................................................................................................................... 23 PING RATE ...................................................................................................................... 24 LIMITATIONS OF THE USER DATA FIELD................................................................................... 24 INFORMATION ON BURST SETTINGS ........................................................................................ 24 IMPACT BETWEEN MEASUREMENT, LOGGING AND BROADCAST INTERVAL ............................................ 25 GPS AND SATELLITE COMMUNICATION SETTINGS ....................................................................... 26 GLOBALSTAR SATELLITE COMMUNICATION ACTIVATION ................................................................ 26 4. MAINTENANCE ............................................................................................................. 28 4.1. 4.2. 4.3. 4.4. GENERAL ......................................................................................................................... 28 REGULAR CLEANING OF THE SURFACE ..................................................................................... 28 PRECAUTIONARY MAINTENANCE ............................................................................................ 28 RETURNS ........................................................................................................................ 29 5. TECHNICAL DATA ......................................................................................................... 30 SAFETY INSTRUCTIONS VISIBILITY DELIVERED. PAGE 7 OF 31 i-Q350LX GPS -SAT USER MANUAL The system described in this manual is for exclusive operation of trained employees. Only qualified personnel that have knowledge of the potential dangers involved should perform the installation, settings, maintenance and repair of the units used. Operational Safety The correct and safe use of these systems assumes that operating and service personnel follow the safety measures described in the manual alongside the generally acceptable safety procedures. If there is a possibility that safe operations cannot be guaranteed, the system must be switched off, secured against accidental use and the service unit responsible immediately informed. Safety Documents The i-Q350 tag was designed, tested and supplied in perfect condition according to document IEC348 Safety Requirements for Electronic Units of Class 1. Condensate / Change of Temperature To avoid condensation in the system, the unit must be allowed to slowly adjust itself to warmer temperatures after removal from cold and cool environments. Do not open the housing There is absolutely no need to open the systems housing during set up. Configuration is done with built in interface wirelessly. Earthing Before establishing any connections the housing of the system must be earthed. Battery Inside All system tags contain a battery; therefore the following warning should be heeded: WARNING - Fire, explosion and burn hazard risk of explosion if battery is replaced by an incorrect type. Do not recharge, short circuit, crush, disassemble, heat above 100 °C (212 °F) Do not incinerate, or expose contents to water Fuses Only experts who are aware of the dangers involved may replace the fuses. It must be ensured that only fuses of the required current rating and the correct type are used for replacement. The use of repaired fuses and/or short-circuiting the fuse holders is prohibited. VISIBILITY DELIVERED. PAGE 8 OF 31 i-Q350LX GPS -SAT USER MANUAL Spare Parts We recommend that only personnel, original products, spare and replacement parts authorized by IDENTEC SOLUTIONS be used for installation, service and repair. IDENTEC SOLUTIONS does not accept any responsibility for materials used, work carried out or possible consequences from unauthorized third party vendors. Electrostatic Discharge Semi-conductors of the type MOS or CMOS as well as two-pin types and precision resistance are sensitive to ESD. All components, printed circuit boards and auxiliary systems should therefore always be classed as sensitive to electrostatic discharge. Before opening the cover the unit should be placed onto an ESD-protected surface. As with all work on modern electronic modules, the use of ESD clamps and ESD mats during work on the unit is recommended. • Sufficiently protect all printed circuit boards that were removed from the unit from damage. • Observe all normal precautions for the use of tools. • Use ESD-protected packaging material. Never use measuring units with low impedance for measuring or testing systems with semi-conductor components. Never use high voltage testing units or dielectric test units to test systems with semi-conductor components. If it is necessary to check the isolating properties of the field wiring, the assemblies (electronic units and sensors) should be disconnected. Earth the test units. IDENTEC SOLUTIONS does not accept the return of products where the regulations concerning the ESD precautions and protective packaging materials were not followed. ESD – Electrostatic Discharge EMC – Electromagnetic Compatibility SELV – Safety Extra Low Voltage – Protective measure against dangerous body currents, formerly: protective first voltage range VISIBILITY DELIVERED. PAGE 9 OF 31 i-Q350LX GPS -SAT USER MANUAL 1. PREFACE 1.1. Preparations This installation manual must be read carefully prior to starting the installation. The described installation works assume that installation materials like cable, antenna and data sensor holder, etc. are available. 1.2. Scope of This Document This document is the hardware description of the i-Q350. This document is intended only for mechanical and electrical installation of these central units. 1.3. Responsibility IDENTEC SOLUTIONS reserves the right to make changes and updates to the content contained herein. It is the user’s responsibility to contact the service department for any possible changes or updates to operating and maintenance procedures. 1.4. Updates Updates will be provided upon request. The information in this document may be subjected to changes without prior notice. 1.5. Scope of Delivery—Visual Inspection Check whether delivery is complete and for any damages. If the delivery is not complete or damaged immediately inform the carrier. The dispatch and service organization of IDENTEC SOLUTIONS should also be informed to facilitate the repair or exchange of the system. 1.6. Associated Documents Software description and Programmer’s Guide • SDK Online Help • i-SHARE Manual • Specific sensor manuals VISIBILITY DELIVERED. PAGE 10 OF 31 i-Q350LX GPS -SAT USER MANUAL 2. INTRODUCTION 2.1. Fundamentals The IDENTEC SOLUTIONS’ SensorSMART Platform is the latest development in asset management, localization and process optimization. Developed to deliver the last mile in industrial communication, the SensorSMART Platform fulfills a niche not previously addressed by available networks. The SensorSMART Platform takes the complexity out of managing assets, personnel safety monitoring and/or the tracking of valuable cargo and the need for multiple technologies. The unique combination of active RFID, RTLS and WSN in one platform eliminates the necessity for complex deployments of multiple technologies, or the need to compromise with one technology’s specific functionalities. The pinnacle of the SensorSMART Platform is that it captures the best of RFID, WSN, and RTLS while also avoiding the less desirable features of each technology. Third party application development is also simplified for added flexibility. 2.2. Component Overview VISIBILITY DELIVERED. PAGE 11 OF 31 i-Q350LX GPS -SAT USER MANUAL The SensorSMART Platform infrastructure features mobile readers (i-CARD), fixed readers (i-PORT) and exciters (i-MARK). Network sensors offer the highest functionality within the SensorSMART Platform. Robust and reliable, SMARTsensors monitor temperature, humidity, light, shock, tilt, motion, push button, digital input, Hall sensor, etc. The SDK (software development kit) is an easy to use framework that allows developers high level access without requiring in depth knowledge of sensor or reader protocols, timing or implementations. Extracting, filtering and sharing data as well as calculating an object’s position is only part of the i-SHARE (edgeware) functionality. i-APP is an intuitive web browser 2.0 application that allows for rapid application development for sensor based applications. It is the SensorSMART Platform’s business intelligence. 2.3. System Components—Sensors 2.3.1. i-Q350 Tags The ILR® i-Q350LX GPS –SAT active RFID tag with satellite navigation and communication uplink provides highly accurate positioning of objects – even in the most remote on- and off-shore locations. The combination of GPS, satellite communication and active RFID sets a new benchmark in the oil and gas industry FEATURES Designed to withstand the harshest and most demanding environments, the i-Q350 satellite tag is ideally suited for applications such as CCU tracking and tracing or localization of high value assets and vehicles. With its integrated GPS receiver and satellite modem, the tag can transmit its GPS position either via RFID or via the globally available Globalstar satellite network. The combination of low power components and a motion sensor enables a smart energy and cost management. The tag only transmits position data when a change of the position is located. This allows an outstanding battery lifetime and minimizes the operational costs to a minimum. The integrated marker functionality allows to control if an object was moved through a particular zone or gate. The inductive marker field triggers the Tag to send the location information to a reader with its RFID capabilities. The ATEX Zone 0 and IECEx certification allows usage of the tag in dangerous and potentially explosive atmospheres and is therefore ideally suited to the oil and gas industry. VISIBILITY DELIVERED. PAGE 12 OF 31 i-Q350LX GPS -SAT USER MANUAL 2.3.2. Polarization of Sensors Vertically polarized Horizontally polarized Polarization is dependent on orientation and is rotation symmetrical. VISIBILITY DELIVERED. PAGE 13 OF 31 i-Q350LX GPS -SAT USER MANUAL 2.4. System Components—Readers 2.4.1. i-PORT M350-2 The i-PORT M350-2 is a reader for the i-Q350 and i-B350 series of IDENTEC SOLUTIONS’s Response and Broadcast Sensors. Built into a compact housing, the i-PORT M350-2 reads and writes data to the sensors at distances of up to 500 meters (1640 feet) on two antennas. Connection to the host system is established via a RS422 interface, resulting in the capability to connect up to 8 readers in a Daisy Chain using commercially available CAT 5 cables and connectors. A simple master/slave protocol enables data exchange. Not only does the protocol contain the data received from the sensor but it can also provide information about the time of data reception, field strength and information about the number of times the sensor has been received by the reader. VISIBILITY DELIVERED. PAGE 14 OF 31 i-Q350LX GPS -SAT USER MANUAL 2.5. System Components—Antennas IDENTEC SOLUTIONS’ antennas are distinguished by their compact design. A variety of antennas can be used, depending on application. The antennas are differentiated by characteristics such as polarization, apex angle, and gain. Optimal fit to the reading zone is achieved by the right choice of antenna (characteristics) and receive sensitivity. As the antennas are passive system elements, no tuning is required, which facilitates installation and maintenance. 2.5.1. Elliptical Polarized Antennas Because of the wide apex angle (120º), a large read zone is achieved, which is desirable when a large quantity of sensors need to be read at one time, or when sensors moving at great speeds need to be interrogated. Since the polarization is elliptical, orientation of the sensor relative to the antenna is not important; if the sensor is in front of the antenna the sensor may be polarized horizontally or vertically along the line of sight of the antenna. Due to its small size and weight, this antenna is very easy to integrate. Orientation Diagrams: Elliptical polarized antenna Elevation Azimuth For this antenna, the maximum transmit power setting is: • A-9185: VISIBILITY DELIVERED. -8 dBm PAGE 15 OF 31 i-Q350LX GPS -SAT USER MANUAL 2.5.2. Linear Polarized Antennas Because of the smaller apex angle (60º), this antenna is more suited to selective data collection and restriction of read zones. Depending on the direction of mounting, the antenna’s field is either vertically or horizontally polarized, requiring the sensor to have the same orientation. Because of the greater gain, longer read ranges can be achieved with this antenna compared to the elliptical polarized type above. Orientation Diagrams: Linear polarized antenna Elevation Vertical Polarization Azimuth Horizontal Polarization Antenna Orientation For this antenna, the maximum transmit power setting is: • W-900R: VISIBILITY DELIVERED. -12 dBm PAGE 16 OF 31 i-Q350LX GPS -SAT USER MANUAL 2.5.3. 1/2-Wave Whip Antenna Dimensions Orientation Diagrams Elevation Vertical Polarization Azimuth Horizontal Polarization For this antenna, the maximum transmit power setting is: • Rod antenna: VISIBILITY DELIVERED. -3 dBm PAGE 17 OF 31 i-Q350LX GPS -SAT USER MANUAL 2.5.4. 1-Wave Rod Antenna Overall Dimensions: 425 × 90 mm Mounting proposal Antenna diagram vertical For this antenna, the maximum transmit power setting is: • Rod antenna: VISIBILITY DELIVERED. -3 dBm PAGE 18 OF 31 i-Q350LX GPS -SAT USER MANUAL 1.1 Tag Mounting Techniques Dimensional Drawing All dimensions in mm. 1.2 Mounting hole pattern VISIBILITY DELIVERED. PAGE 19 OF 31 i-Q350LX GPS -SAT USER MANUAL 1.3 Mounting to container Mounting on container side wall VISIBILITY DELIVERED. Make sure that the tag is mounted with a minimum distance of 50mm from the frame. Shielding of the tag can lead to a performance loss. Best performance can be achiebved with a clear line of sight to the sky. PAGE 20 OF 31 i-Q350LX GPS -SAT USER MANUAL 1.4 Screws Important Information 1. Tag shall only be mounted on flat and smooth surface. Warped and uneven surface can lead to damages and to water ingress. 2. Mounting holes must not exceed a diameter of 6.5mm. 3. Only screws with cylindrical Allen heads are suitable for mounting the tag. We do not recommend using countersunk screws or screws with hexagon heads. 4. Secure the screws with self-locking nuts, spring washers or Nord-lock washers. Self-cutting tapping screws can become loose over time and should be checked regularly. 5. If the tag is mounted outdoors or in a damp environment, all mounting parts need to be made of stainless steel or other non-rusting material. 6. A temperature of at least +10 °C (+50 °F) must be maintained during mounting to prevent the casing from cracking. 7. Recommended maximum torque (for screws with property class 8.8) M6/#14: 6.0 Nm 8. If the torque is any greater, the screw may over-tighten or the housing can be damaged. 9. Metal surfaces in direct proximity to the tag may reduce the tag’s range of function. Tags should not be mounted in metal recesses or corners. 10. After mounting, the tag’s function should be tested with appropriate devices and software. VISIBILITY DELIVERED. PAGE 21 OF 31 i-Q350LX GPS -SAT USER MANUAL 2.6. Tag Identification Model description Type description ATEX reference Manufacturer information VISIBILITY DELIVERED. PAGE 22 OF 31 i-Q350LX GPS -SAT USER MANUAL 3. INITIAL OPERATION, CONFIGURATION OF THE TAG 3.1. General Important Note Do not open the housing! Configuration is done using the built-in air interface of the i-Q350TLX FL. The Response mode of the i-Q350L GPS -SAT offers the following features for configuration: • Broadcast mode can be configured for simultaneous operation. In this case the tag responds to commands from a reader as well as broadcasts configurable data in a regular interval. Tools Needed • PC running on MS Windows with the Tag Configuration for SSP 350 series tags • Connection to an i-PORT M 350 or i-CARD CF 350 to communicate with the tags Overview on the Configuration Software Select Ping Rate and Ping Message Content in the block “Broadcast” GPS Settings Select Number of bursts (new loop) in the block “Marker” Satellite Settings VISIBILITY DELIVERED. PAGE 23 OF 31 i-Q350LX GPS -SAT USER MANUAL 3.2. Ping Rate Note: These settings can be found in the Tag Configuration software tool in the section “Broadcast” • Active: Activates or de-activates the broadcast function that regularly sends out messages. • Broadcast Interval: 0 = no broadcast messages are sent, value > 0 = Broadcast interval in seconds. This can be set in steps of 0.5 sec, from 0.5 sec up to 300 sec. • Broadcast Message Options: The options in this field depend on the capabilities of the tag. The subchapter “Limitations of the User Data Field” lists the possible options of this tag type. • User Data Length: Configure the number of Bytes from the “User Data” that is sent with a broadcast message. The number starts from Byte 0 (zero). The limits of the User Data length are described at the end of this chapter 3.1. Limitations of the User Data Field The total length of the broadcast message (burst or ping) is limited to 50 Bytes. Depending on the broadcast message options, these are the allowed number of bytes for the user data: Message Type User Data only GPS | User Data Marker | User Data Marker | User Data | GPS Length of User Data max. 50 Bytes max. 42 Bytes max. 38 Bytes max. 31 Bytes 3.2. Information on Burst Settings The parameter “Time between Bursts (Marker)” is not simply a delay time. It is in fact a timeslot. In this timeslot the tag chooses a random moment to do a single burst. This avoids that burst collisions with other tags, that are simultaneously triggered by the same marker loop. These timeslots are repeated until all bursts are sent. In the event that dozens of tags are triggered to burst at once, this value can be increased. The result of increasing the slot width is there will be a longer time interval between other bursts being sent. Fore example with an increased value of 700 ms and 8 bursts, the amount of time for all bursts is 5.6 seconds. VISIBILITY DELIVERED. PAGE 24 OF 31 i-Q350LX GPS -SAT USER MANUAL Example This example shows 3 tags (A, B, C) that are simultaneously triggered by a marker loop (LF marker) and are configured to burst 3 times. The timeslot (Time between Bursts) is set to the default value of 40 ms. The last row shows how the random use of the timeslot avoids collision between the tags. 3.3. Impact between measurement, logging and broadcast interval The intervals for temperature measurement, temperature logging and broadcasts can be configured independently. Example 1 Measurement Interval: Broadcast Interval: Logging Interval: VISIBILITY DELIVERED. 5 sec 20 sec 60 sec PAGE 25 OF 31 i-Q350LX GPS -SAT USER MANUAL If the measurement interval is shorter than the broadcast interval, the tag broadcasts the average value measured during the time between broadcasts. In this example the value is an average over the 4 measured values during the broadcasts: Avg. Temperature for Broadcast = MB1 + MB2 + MB3 + MB4 With a longer logging interval, the average temperature for logging is calculated as follows: Avg. Temperature for Logging = ML1 + ML2 + … + ML12 12 Example 2 Measurement Interval: Broadcast Interval: Logging Interval: 20 sec 5 sec 60 sec If the broadcast interval is shorter than the measurement interval the tag broadcasts the last measured value untill the tag measures a new one. In this example the tag sends the same value 4 times. The logged value is still the average during the log interval. 3.4. GPS and Satellite communication settings 3.5. Globalstar Satellite communication activation The Globalstar Satellite module with the FCC ID can be accessed by carefully removing the back panel of the device. The module is properly labeled with the FCC ID: L2V-STX3 VISIBILITY DELIVERED. PAGE 26 OF 31 i-Q350LX GPS -SAT USER MANUAL VISIBILITY DELIVERED. PAGE 27 OF 31 i-Q350LX GPS -SAT USER MANUAL 4. MAINTENANCE 4.1. General When installed correctly the SensorSMART System will operate virtually maintenance free for many years. However, in the event maintenance is required only trained and authorized personnel are permitted to perform the updates, changes and maintenance necessary. 4.2. Regular Cleaning of The Surface Remove dust with a brush or compressed air. If there are fatty or oily substances use a soft cloth moistened with a mild rinsing agent. Warning Do not clean the tag in a dishwasher. Do not sandblast the tag. Do not use high pressure water jet or steam cleaner. Do not use cleaning products containing chemical additives. WARNING - Electrostatic Hazard: Clean plastic Tag surface only with a damp cloth. Do not use solvents. 4.3. Precautionary Maintenance A regular check of the system is recommended. Unstable connections could lead to damage and malfunctions of the system and should therefore be repaired as soon as possible. A Brief Checklist • Are all housings intact? • Are all cables intact? • Are all connectors intact? • Are all connectors securely fastened? • Are all screws still tight? • Is there a malfunction at a specific unit? VISIBILITY DELIVERED. PAGE 28 OF 31 i-Q350LX GPS -SAT USER MANUAL 4.4. Returns Parts or main components returned for repair or exchange must be handled with great care. PC cards must be returned in the appropriate ESD-protecting packaging material. Please follow the RMA policy under: http://cdn.identecsolutions.com/wp-content/uploads/2012/06/IMS_PD-OPS014_Hardware_Return_and_Repair_Policy_03e.pdf Return to: IDENTEC SOLUTIONS AG Service Department Millennium Park 2 6890 Lustenau AUSTRIA VISIBILITY DELIVERED. PAGE 29 OF 31 i-Q350LX GPS -SAT USER MANUAL 5. TECHNICAL DATA Communication Broadcast 350 Operation Mode Transmits Tag ID and user data in pre-defined interval Read Range up to 500m (1600ft)* Compatibility i-PORT M350, i-CARD CF 350 and i-PORT 4-350 Operating Frequency 868 MHz (EU) or 920 MHz (NA) Transmit Power <1mW Communication Response 350 Operation Mode Bi-directional communication (reading log, blink LED, write/read data) Read Range up to 250m (800ft)* Compatibility i-PORT M350 and i-CARD CF 350 Operating Frequency 868 MHz (EU) or 920 MHz (NA) Transmit Power <1mW Communication Marker Operation Mode Read Range Compatibility Operating Frequency Receives Marker ID and transmits marker information several times via Broadcast 350 telegrams up to 5m (16ft)* i-MARK 125 kHz The communication range depends on the antenna type, the antenna cable runs and the environmental conditions. Communication GPS Receiver type Time-To-First-Fix Horiz. Position Accuracy 50 Channels GPS L1 frequency, C/A Code Cold Start 26 s Hot Start 1 s GPS 2.5 m Communication Satellite Frequency Protocol Modulation Average TX Power Maximum TX Time Packet Size Electronic Serial Number Certification 1.610 – 1.620 GHz Simplex Direct Sequence Spread Spectrum (DSSS) 18 dBm +/- 2 dB RMS 1.4 seconds 9 bytes (or custom programmable) Each unit identified with a unique ESN Globalstar Data Data Retention Write Cycles Memory Size Identification Code > 10 years without power 1.000.000 writes 30.000 Bytes user defineable 48 bit fixed ID Sensors Shock Motion up to 100G on all 3 axis, 50mG sensitivity up to 8G on all 3 axis, 4mG sensitivity Configuration Device Ping Rate Number of Bursts Broadcast User Data GPS fixes Satellite communications i-PORT M350 or i-CARD CF350 Configurable from 0.5 to 300 seconds insteps of 0.5 seconds Configurable from 0 to 15 Up to 50 Bytes Configurable Configurable VISIBILITY DELIVERED. PAGE 30 OF 31 i-Q350LX GPS -SAT USER MANUAL Electrical Power Source Battery lifetime expectancy Environmental Conditions Operating Temperature Humidity Shock Vibrations Standard/Certification Europe** North America** ATEX/IECEx** 4x Lithium battery 2200mAh (not user-replaceable) 4 years @ 10 seconds ping rate, 2 GPS fixes and 2 satellite communcations per day –30 °C to +60 °C (–22 °F to +140 °F) 10% to 95% relative humidity @ 30°C EN 60068-2-32: Multiple drops to concrete from 1m (3ft), 5 times EN 60068-2-29: 50G on all 3 axis, 3 times per axis EN 60068-2-6: 5G, 20 sin wave cycles per axis, 5-500Hz EN 60068-2-64: noise 5 to 1000Hz, 90 minutes per axis CE (EN 300 220-1, -3; EN 301 489-1,-3; EN 60950) FCC Part 15 (US); Industry Canada ATEX Zone 0 (II 1 G Ex ia IIC T4) **Certification pending Mechanical Data Dimensions Enclosure Material Enclosure Rating Weight VISIBILITY DELIVERED. 210 x 95 x 37 mm (8.3 x 3.7 x 1.5 inches) PA 6.6 GF30 and rubber end caps IP67 (immersion up to 1m) & IP69K (high pressure water jets) 500 grams (18 ounces) PAGE 31 OF 31
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf Linearized : No Page Count : 31 PDF Version : 1.4 Title : Microsoft Word - M_EN_i-Q350GPS SAT_V10_W updated 3.docx Producer : Mac OS X 10.9.4 Quartz PDFContext Creator : Word Create Date : 2014:08:27 10:40:40Z Modify Date : 2014:08:27 10:40:40ZEXIF Metadata provided by EXIF.tools