InBody INBODY-H20B Low Power Communication Device User Manual manual

Download:
Mirror Download [FCC.gov]
Document ID	1908835
Application ID	bwJxTChcXRjK964N0mvtQg==
Document Description	manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	165.94kB (2074274 bits)
Date Submitted	2013-02-28 00:00:00
Date Available	2013-02-28 00:00:00
Creation Date	2012-01-30 18:33:55
Producing Software	doPDF Ver 7.2 Build 370 (Windows XP Professional Edition (SP 2) - Version: 5.1.2600 (x86))
Document Lastmod	2013-02-25 18:08:23
Document Title	manual

Thank you for purchasing InBody H20 or H20Ⓑ.
H20Ⓑ has Bluetooth function but H20 doesn’t.
Please read this manual carefully and use it with proper operation.
Keep it handy for future reference.
✽This product is medical equipment.
ⓒ 1996-2012 Biospace Co., Ltd. All rights reserved.
Notice
This user’s manual cannot be copied, translated or transformed into different media without a prior
written consent from Biospace Co., Ltd, according to the copyright laws. This user’s manual and
product pertinent to this manual may have misprints or technical flaws, which can be modified
without prior notice to the readers. Biospace is not liable for any damage caused by a failure to meet
the requirements in this user’s manual.
Biospace Co., Ltd. [Head office]
518-10, Dogok 2-Dong, Gangnam-gu, Seoul 135-784, Korea
TEL : 82-2-501-3939
FAX : 82-2-578-2716
Homepage: http://www.inbody.com
E-mail: info@inbody.com
Acknowledgements
Biospace, InBody, Lookin’ Body are the registered trademarks of Biospace Co., Ltd.
The names of the companies and products in this manual other than those of Biospace Co., Ltd. are
the trademarks of the companies. Stating the products of other companies is strictly for the purpose
of providing information, and not to guarantee or recommend the products. Biospace is not
responsible for the performance or the use of these products.
Biospace reserves the right to modify the dimensions or exterior of InBody H20 to improve the quality
of the products, without consent of the customer.
BM-ENG1C-A5-A-120127
How to use this manual
This user’s manual explains the functions of the InBody H20.
Follow the instructions below for effective use this manual.
1.
Please read all the instructions in this manual thoroughly before operation.
2.
Fully utilize the helpful materials, such as the diagrams and illustrations, to get a clear
understanding of the product.
3.
Before calling Biospace for assistance,
please refer to “ Chapter 11. One-minute check before calling for service ”.
4.
If you have clinical issues while using the InBody H20, please contact us using the e-mail
address as shown below.
E-mail : info@inbody.com TEL: 82-2-501-3939
5.
Most importantly, please read the instructions and become familiar with the following notations:
The important information to warn you of situations which might cause major injury and/or damage to property if
instructions are not carefully followed.
The important information to warn you of situations which might cause minor injury and/or damage to property if
instructions are not carefully followed.
The important and helpful information for operation.
Safety Information
Make sure not to use this equipment with medical electrical devices, such as a pacemaker.
NO USAR USARLO CON EQUIPO MEDICO ELECTRONICO ASI COMO CON MARCAPASOS.
Keep this equipment away from liquid.
MANTENER USARLO LEJOS DEL AGUA.
1. Do not use this equipment in combination with the following electronic medical devices.
- Medical devices, such as a pacemaker
- Electronic life support systems, such as an artificial heart/lung
- Portable electronic medical devices, such as an electrocardiograph.
2. Physically disabled persons or children should not attempt to take measurements alone, but
instead should get help by having manager or guardian hold them from the side or the back not to
slip or to measure incorrectly.

3. Do not dismantle the equipment or open the back cover. Internal parts are not for customer use. If
the equipment is dismantled, the warranty is void, and service costs will be charged. If service is
required, contact Biospace or the supplying agency.
4. When connecting peripherals (optional devices) to the InBody H20, turn on the power of the
peripherals before turning on the InBody H20. When turning the power off, turn off the InBody H20
before turning off the peripherals. This process will minimize the harm to the equipment caused by
electrical shock.
II
5. You may slip off the device if you step on it with wet feet.
6. The arm consists of a hand electrode. Do not force the arm in the wrong direction. The resulting
damage may affect the functioning of the internal cable and circuit board.
7. Individuals with any kind of contagious disease or any kind of injury on the palm of their hand or
sole of their foot should not come in contact with this product.
8. Never start weight reduction or exercise therapy without instruction from a physician or a specialist.
Self-diagnosis may damage your health. Consult with your physician first.
9. This equipment is specifically designed to analyze body composition. Use the equipment only for
its intended use as described in this manual.
10. Follow local governing ordinances and recycling plans regarding the disposal or recycling of
device components.
III
1. Cross Contamination
Individuals with any kind of contagious disease or infection must not use or come in contact with the
platform or this product. Please be sure to clean the platform with appropriate disinfectant after each
use. Never pour any liquid directly on the platform, as it may leak and cause internal damage. Use a
soft cloth and appropriate ethyl alcohol to wipe off the platform. Do not wipe the platform with strong
chemicals.
2. While moving, installing or using this product, be sure to protect it against any physical shock or
damage. Always use the packing material and the original shipping box when moving or transporting
this product.
3. Always operate this product within prescribed ranges of temperature, humidity, and pressure.
Operating in ranges outside of those specified may affect the operation of this product and may
cause malfunctions.
4. Be careful not to spill or drop any residues of food or beverages on this product. It may cause
serious damage to the electronic components.
5. Cleaning
Keep the platform and control panel clean by wiping them with disinfectant. Never pour any liquid
directly on the platform, Use a soft cloth and appropriate ethyl alcohol to wipe off the platform. Do not
wipe the platform with strong chemicals.
6. Wipe up gently the platform and control panel of the product with a soft cloth for disinfectant.
7. Install or locate equipment only in accordance with the provided installation instructions.
IV
8. This equipment should be serviced only by qualified personnel. Contact Biospace for any
Customer Service issues.
9. Please use your hands to operate buttons. Using feet may lead to malfunction of buttons.
1. This equipment may cause the above mentioned medical devices to malfunction.
This equipment may cause harmful interference to other devices in the vicinity, if not installed and
used in accordance with the installation specifications. However, there is no guarantee that the
interference will not occur for a particular installation.
2. Do not dismantle the product. Internal parts are not for customer use. If the unit is dismantled, the
warranty is void, and service costs will be charged to you. If service is required, contact Biospace or
the supplying agency.

3. This product should be serviced only by qualified service personnel. Contact Biospace for
examination, repair or adjustment.


4. Do not move the equipment with the power on.
5. Do not jump or shock on the platform, these may cause an incorrect measurement or malfunction.
6. Keep this equipment away from liquid, other contaminates. These will cause a loss of function or a
critical damage on the product. Do not put this product in direct sunlight, close to heaters.
Information
1. This product has been designed, manufactured, and inspected under the full quality assurance
system of Biospace. Biospace fulfills European MDD(Medical Device Directive), and InBody H20 has
acquired the CE conformity marking.
2. This equipment may cause the above mentioned medical devices to malfunction.
3. This equipment may cause harmful interference to other devices in the vicinity if not installed and
used in accordance with the installation specifications. However, there is no guarantee that the
interference will not occur for a particular installation.
4. The InBody H20 has been designed, manufactured, and inspected under the full quality assurance
system of Biospace. Biospace fulfills the international standardization system, ISO 90001 and ISO
13485.
5. The InBody H20 fulfills the Standards of IEC60601-1(EN60601-1), Safety of Electric Medical
Equipment. In addition, the InBody H20 complies not only with Level A for Noise Immunity, but also
with Level A for Noise Emission by the Standard IEC60601-1-2(EN60601-1-2), Electromagnetic
Compatibility Requirements.
VI
Indicators & Safety Symbols
Disposal of old Electrical & Electronic Equipment
(Application in the European Union and other European countries with separate collection
system)
This symbol indicates that this product shall not be treated as household waste. Instead, it shall
be handed over to the applicable collection point for the recycling of electrical and electronic
10
equipment. By ensuring this product is disposed of correctly, you will help prevent potential
negative consequences for the environment and human health, which could otherwise be
caused by inappropriate waste handling of this product. For more detailed information about
recycling this product, please refer to local governing ordinances and recycling plans.
Follow local government ordinances and recycling instructions regarding disposal or recycling of device components,
including batteries.
VII
Workplace Requirements
□ Operation Environment
Temperature range
: 10 – 40 ℃
Relative humidity
: 30 – 75 %
Atmospheric pressure range
: 70 – 106 kPa
□ Storage Environment
Temperature range
: -20 – 70 ℃
Relative humidity
: 10 – 95 % (No condensation)
Atmospheric pressure range
: 50 – 106 kPa
□ Battery
Ratting
: AA Type Battery(1.5V X 4ea)
VIII
Introduction
Body Composition consists of 4 major components: Water, Protein, Minerals and Fat. These four
elements are the fundamental ingredients the body is comprised of, and it is important for them to be
in balance. Body composition analysis is expected to quantify and measure these ingredients.
Until recently, diagnosing obesity has focused on appearance, without considering a balanced body
composition. For more reasonable healthcare, accurate body composition analysis must be
performed first, to achieve the balance of the four major body components.
Biospace has earned international recognition for technical expertise demonstrated through the
InBody series. Based on the experience and technology over the last 10 years, Biospace has
released the body composition analyzer, the InBody H20.
InBody is highly recognized for its world-best technological excellence by many customers in more
than 40 different markets including the US, European countries, Japan, and more. The strong brand
is well-known among medical professionals as well as academic communities, and now it is the time
for you to meet InBody at your place. Enjoy healthy lifestyle with InBody!
Kichul Cha, CEO
IX
Notice
Please read thoroughly and follow the instructions.
1. Please do not press
with other object on the platform.
2. Please use your hands to operate buttons. Using feet may lead to malfunction of buttons.
3. Please be sure to avoid keeping or using InBody in wet area, i.e. bathroom. It may cause
malfunction of the device.
4. You may slip off the device if you step on it with wet feet.
5. Please wrap InBody and keep it level while storing for a long period.
6. Please remove the batteries from the device while not in use for a long time. It may cause
corrosion when left in contact with the device.
(Please follow the instruction in reverse order of ‘ Chapter 2. Insert Battery ’ )
7. When you change the batteries, please use only the new batteries. The 4 batteries that are used
should be the same model from the same company.
Contents
How to use this manual
Ⅰ
Safety Information
Ⅱ
Indicators & Safety Symbols
Ⅶ
Workplace Requirements
Ⅷ
Introduction
Ⅸ
Notice
Ⅹ
1.
Product Package
2.
Insert Battery
3.
Connecting InBody H20Ⓑ and PC
4.
Weight Measurement Mode
5.
InBody Test Mode
6.
Maintenance
10
7.
Understanding of Results
11
8.
Error messages
14
9.
One-minute check before calling for service
15
Appendix
17
✽ More about the InBody H20
✽ Specifications
✽ Customer Service Information
1. Product Package
When opening the box, check to make sure all the following items are included.
Included Items
① InBody H20 unit
② Quick Installation Guide
③ Battery (AA 1.5 V 4 ea)
④ Bluetooth dongle
To prevent physical shock, use Biospace’s packing material when shipping or transporting the equipment.
2. Insert Battery
< Rear part>
(1) Open the battery cover at the bottom of the device.
(2) Insert the batteries (AA 1.5 V 4 ea) in right direction.
(3) Close the battery cover until it clicks.
Battery is low when
is still on after you turn on InBody H20.
Please replace the batteries when
is blinking after you turned on InBody H20.
3. Connecting InBodyH20Ⓑ and PC
(1) Connect Bluetooth dongle(Bluetooth dongle from product package) to PC.
(2) Access http://www.myinbody.com and register.
(3) Click “InBody PC Program Install Guide” and install the program.
Ⓑ
(4) Turn on H20
Ⓑ
When the bluetooth is being connected to InBodyH20 , the logo will display on the
LCD screen.
Please use the Bluetooth dongle provided by Biospace only.
4. Weight Measurement Mode
A. Body Composition Analyzing
(1) Step on the foot board to measure your weight.
(2) When the measurement is over there will be a beep and you will see your weight on the screen.
(3) When the weight is not correct, press the foot plate to turn on H20 and wait for 5 seconds. Then
you can re-measure your weight.
B. Power Off
(1) Weight measurement is done, step down from the foot plate and the power will automatically be
turned off.
(2) If you step down the foot plate while measuring, the device will not be turned off for 20 seconds.
5. InBody Test Mode
A. Tips Before Body composition analyzing
(1) Make yourself as light as possible. Wear light clothes for measurement.
(2) Please go to the bathroom before measurement. Urine and feces affect your weight and
consequently the body composition analysis.
(3) Please conduct the measurement before meals or at least two hours after meals. Food in the
stomach before digestion affects body weight, causing possible errors in the result.
(4) Please avoid taking measurement right after bath, sauna, physical exercise. Body water is in
instable condition after a bath, a sauna, or physical exercise, which could lead to incorrect
measurement data.
(5) It is recommended to have a test in the morning. Body composition is in the most stable condition
before starting full activities of the day.
(6) In case of repeated measurement to compare the results, please maintain surrounding conditions
same (weight of clothes, time, food intake, etc.).
(7) If you wear a pacemaker or other electronic medical devices inside your body, please do not use
this body composition analyzer.
B. Body Composition Analyzing
(1) Push the button in the center to turn on H20.
(2) Rotate the button in the center to set your height. Wait for few seconds once it is set.
(3) The height will appear on the LCD screen.
(4) After entering the height hold the handle and step on the foot board to measure your weight.
(5) When weight is set, the measurement position icon will blink while checking if the hand and feet
electrodes are connected.
(6) With measuring sound, InBody measurement will start. (The measurement will take 3~5 seconds)
(7) When the test is over there will be a beep and you will see END on the screen. And Weight, Body
fat Mass, Muscle Mass will be displayed on the LCD.
(8) Measurement results will be shown twice and the END will appear on the LCD. After that you may
release the handles and step down.
(9) After stepping down, the result can be seen using the dial button.
Please use your hands to operate buttons. Using feet may lead to malfunction of buttons.
InBody H20Ⓑ can be operated for the body composition analysis without connection to PC. For more results and
data management, however, use of InBody H20Ⓑ with PC connection is recommended..
C. How to Hold InBody Electrode
Take the hand grip and hold it with the palms and thumbs touching the hand electrodes. Step on the
foot electrodes at the platform. Make sure your hands and feet on both sides are not touching each
other. Please refer to next page for the right measurement posture.
The measurement begins automatically when your position is set.
(1) Hand Electrodes
Fingers must not leave the surface of the electrodes. Right hand and left hand must not touch each other.
(2) Foot Electrodes
Step on the foot electrode with the
Be careful not to stand with your heels
heels first and then the entire soles of
on the pants hems.
your feet.
Make sure your bare hands and bare feet maintain contact with electrodes. Please be careful not to let the hems of
your pants get stuck between your heels and the foot electrodes. In case your feet are relatively small, please step
on the electrode with the heels touching them first.
D. Recommended measurement posture
➊ Please keep your eyes to the front.
➋ Grab the hand electrodes with bare hands and be careful not to let your hands touch each other.
➌ Thighs should not touch each other if possible.
✽Tip: For those whose thighs contact each other, it is recommended to wear shorts, which come down below the thighs for
accurate measurement.
➍ No moisture or too much callus tissues on the palms or soles of feet may lower the accuracy of
the measurement.
✽Tip : Wipe your hands and feet with wet tissues before the measurement.
➎ Take your socks or stockings off and measure with bare feet.
Step on the platform with your feet and the electrodes aligned
on foot electrodes. Your feet must not contact each other.
E. Power Off
(1) InBody test is done, step down from the foot plate and the power will automatically be turned off
after 60 seconds. Turn the dial to see the measurement results again in 60 seconds.
(2) If you step down the foot plate while measuring, the device will not be turned off for 60 seconds. If
you step on the foot plate within 60 seconds the measurement will restart.
6. Maintenance
(1) After usage, wipe electrodes with a wet tissue (also known as wet naps, surface wipes, antibacterial tissues, etc.) Wet tissues can be purchased at any local store.
(2) Handle the arms with care. Never apply excessive force near the hand electrode joint. The
damage caused by misuse may affect the function of the internal cable and electric board.
(3) Do not place anything on the platform or apply any pressure onto it when the InBody H20 is not in
use.
(4) Do not drop any food or liquid on the equipment. It may affect the electrical parts in the equipment
or cause damage.
(5) Once a week, wipe the exterior sides of the InBody H20 with a dry towel. In particular, clean the
LCD monitor, using gentle care not to scratch the surface.
(6) Follow local governing ordinances and recycling plans regarding the disposal or recycling of
device components.
10
7. Understanding of Results
A. Result Screen
During measurement, the InBody H20 displays information of an examinee’s body composition on
the LCD. The results are shown while you are on the foot plate.
ⓛ Weight (kg)
Ideal weight is based on examinee’s height. Using the classical BMI method, the InBody 370
identifies the standard BMI as 22kg/m2 for males, 21.5kg/m2 for western females and 21kg/m2 for
asian females.
Formula to get ideal weight
Male
Female
Ideal Weight = Height (㎡) × 22
(asian)
(western)
Ideal Weight = Height (㎡) × 21
Ideal Weight = Height (㎡) × 21.5
The standard range of weight is 85~115% based on the standard range of BMI.
11
② Percentage of Body Fat (%)
Percentage of Body Fat indicates the percentage of body fat to body weight. The ideal percentage of
body fat is 15% for men and 23% for women, while the standard range of Body Fat Mass for men is
10-20% of the weight and 18-28% of the weight for women. In the case of children under the age of
18, children’s standard is used.
Ref. Samuel J. Fomon, et al. (1982): Body Composition of reference children from birth to age 10 years. The
American Journal of Clinical Nutrition 35, 1169-1175.
③ Skeletal Muscle Mass (kg)
Distinctively, skeletal muscle mass, which generally indicates the lean body mass of each arm and
leg, can be controlled by exercise and dietary habits. Compare the bar graphs’ lengths of skeletal
muscle mass with body fat mass. If the bar of skeletal muscle mass is relatively shorter and under
the standard value, lean body mass lacks in the body, while the opposite case is proper. 100%
signifies ideal lean body mass when examinee’s weight is normal. The standard range is 90~110% of
standard skeletal muscle mass based on standard weight.
12
④ BMI (Body Mass Index, kg/㎡)
BMI is determined by using only weight and height and diagnoses superficial obesity. The standard
values are 22kg/m2 for male and 21.5kg/m2 for western female and 21kg/m2 for asian female.
Formula) BMI = weight (kg) ÷ height2 (㎡)
Determination 1) WHO Standard
BMI(kg/㎡)
Classification
Diagnosis
<18.5
Underweight
Under
Infectious disease, malnutrition related disease
18.5~24.9
Normal
Standard
Least risk at most disease
25.0~29.9
Overweight
30.0~34.9
Obese1
35.0~39.9
Obese2
>40
Severely Obese
May cause health problem
Over
Increase of the risk of cardiac disease,
high blood pressure, diabetes, etc
Ref. WHO and the National Heart, Lung, and Blood Institute: clinical guidelines on the identification, evaluation, and treatment of
overweight and obesity in adults, the evidence report. June 1998, xiv
Determination 2) Asian-Pacific Standard
BMI(kg/㎡)
Classification
Diagnosis
<18.5
Underweight
Low (high risk of other clinical disease)
18.5~22.9
Normal
Average
>23
Overweight
23~24.9
Risky Overweight
Increased
25.0~29.9
Obese step1
Moderate
>30
Obese step2
Severe
Ref. Korean Society for the Study of Obesity, chapter 2. Redefining and Evaluation, The Asian-Pacific perspective :
Redefining Obesity and its Treatment:, 1st edition, Korean Society for the Study of Obesity, 2001, p10.
13
8. Error Messages
InBody H20 helps users respond to possible malfunctions that may occur by displaying error
messages described below. This is the list of typical error messages and adequate responses.
A. Error 1.
Cause 1
Bad body posture due to poor contacts at hand or foot electrodes.
Actuion1 See “Chapter 6 - C. How to Hold InBody Electrode” and correct the body posture.
B. Error 2.
Cause 1
Fundamental problem of the device suspected.
Actuion1 Please contact Customer Support . (info@inbody.com)
14
9. One-Minute Check Before Calling for Service
This section lays out the order of steps you have to take in case of malfunction, with the assumption
that you have some basic knowledge about how to operate the equipment. If you still have the
problem after taking the following steps, contact the local distributor or Biospace.
A. I cannot turn on the device even though I press InBody or Weight button.
Cause 1 The batteries might have been fully discharged.
Action 1 Replace the batteries.
Cause 2 User might have pressed
too shortly.
Action 2 Press and hold the button until the screen lights up.
B. Measurement data looks strange.
(Percent body fat, muscle mass, or other parameters are too high or too low.)
Cause 1 Poor contact between the body and the electrodes or incorrect body posture.
Action 1 Please maintain correct body posture throughout the test.
Cause 2 Measured weight looks strange.
Action 2 Please check if the hand grip is placed at right position.
or
Please check Weight Offset in the configuration.
Cause 3 Personal information of others – ID, height, etc. – might have changed.
Action 3 Please check ID, age, height, gender, and other personal information. If height information
is wrong, please correct it.
15
C. Measurement data is not transferred.
(When the Bluetooth is connected, the data will be automatically transferred after the measurement.)
Cause 1 Poor connection of the Bluetooth dongle. Its connection can be checked by the Bluetooth
icon.
Action 1 Please check if there is a Bluetooth icon on the LCD and reconnect the Bluetooth dongle.
Action 2 Please find the Bluetooth icon from Control Panel and double click, then below screen will
appear. Please set as below picture and click “OK” button to save the set value.
16
Appendix
More about the InBody H20
A. How does BIA work?
The Bioelectrical Impedance Analysis (BIA) method is based on the fact that the human body
consists of conductors and non-conductors. Generally, 50~70% of the human body consists of water
which functions as a conductor, whereas body fat functions as a non-conductor.
The classic BIA method measures the impedance of the whole body on the assumption that the
human body can be considered a cylinder for the application of this model. If A is the cross sectional
area, and L is the length, the impedance of the cylinder can be expressed as follows.
If both sides are multiplied by L, We get the new expression as follows.
According to this expression, if we know the L and the impedance value, we get the volume. That is
to say, if we know the height of the human body (acting as a conductor), and know the impedance
value, we can get the volume of body water. Here, the volume represents examinee’s height.
Therefore, the two directly used variables in body composition analysis are impedance and height.
The principle of the InBody H20’s body composition analysis is explained by the following; the
volume of body water, an electrolyte, is calculated first with a measured impedance value. Then, we
can get the value of fat free mass using the volume of body water. Body fat mass is determined by
deducting the lean body mass from the measured weight.
Height should be entered by the user. Weight can be directly measured on the InBody H20.
17
B. Core Technology
The following are key features that make the InBody H20 extremely convenient, timely, and accurate.
(1) Tetrapolar 8-Point Tactile Electrode
It was a complex and inconvenient procedure to attach and detach the
electrodes to a specific spot every time. Trained technicians were needed for
each measurement. The InBody H20 uses tactile electrodes to avoid the
possibility of errors and inaccuracies. The 8-point Tactile Electrode method
enables the InBody H20 to efficiently produce accurate data every time.
(2) Segmental Analysis
There are some claims to be able to estimate the body composition separately; there is no
technology which can really measure it separately other than Biospace. Segmental measurement is
the technology that assumes the body as five cylinders of four limbs and trunk and measures the
impedance of these parts separately. Segmental body composition analysis provides segmental
measurement of body water, muscle mass, and fat free mass. Furthermore, the analysis is highly
accurate because the measured value of a certain part does not affect the measurements of other
segments. It is because body composition analyzers lack accuracy in measuring body fat and cannot
figure out the patient’s exact shape that they must rely on empirical references to correct inaccurate
measured values. But, the InBody with the technology of segmental analysis can exactly figure out
difference by gender, aging, disease and ethnic without any empirical estimation. Based on the fact
that fat free mass (FFM) consists of about 73.3% of body fluid, it can be concluded that the
distribution of body fluid reflects the distribution of FFM. Because the InBody can analyze the
segmental body fluid distribution (each arm, trunk, and each leg separately), it can as a result
examine a patients segmental development.
18
C. Classifications
Type of protection against electric shock: Internally Powered Equipment
Degree of protection against electric shock: Type B Applied Parts
Degree of protection against the ingress of water: Ordinary equipment: IPX0
Equipment not suitable for use in the presence of a flammable anesthetic mixture with air or with
oxygen or nitrous oxide.
Mode of operation: Continuous operation
Any changes or modifications in construction of this device which are not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
Contains transmitter FCC ID : QOQWT11
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own expense.
19
D. Specifications
Items & Standard
Bioelectrical
Impedance(BIA)
Measurement Items
Electrode Method
Measurement Method
Body Composition
Calculation Method
Outputs
Applied Rating Current
Power
Dimensions
BODY COMPOSITION ANALYZER of Direct Segmental Multi-frequency
Bioelectrical Impedance Method
10 Impedance Measurements by Using 2 Different
Bioelectrical
Impedance(Z)
Tetrapolar 8-Point Tactile Electrodes
Direct Segmental Multi-frequency Bioelectrical Impedance Analysis
Method; DSM-BIA Method
No Empirical Estimation
Weight, Skeletal Muscle Mass, Percent Body Fat, BMI
450 ㎂
DC 6V (1.5V X 4ea) AA Type Battery
310.3(W) × 356.4(L) × 58.3(H) : mm
2.7kg (6lb.)
Measurement Duration
5 seconds
Color
Soft White
Storage Environment
Segments (Right Arm, Left Arm, Trunk, Right Leg
and Left Leg)
Machine Weight
Operation Environment
Frequencies (20 ㎑ and 100 ㎑) at Each of 5
10 ~ 40℃, 30 ~ 75%RH, 70 ~ 106kPa
-20 ~ 70℃, 10 ~ 95%RH, 50 ~ 106kPa (No condensation)
Weight Range
10 ~ 200kg (22 ~ 440.9 lb.)
Height Range
50 ~ 300cm (19.68 ~ 118.1 in.)
* Specifications may change without prior notice.
20
E. Customer Service Information
Corporate agents’ addresses are listed below. Contact us for assistance or more information.
Biospace Co., Ltd.
518-10, Dogok 2-Dong, Gangnam-gu, Seoul 135-784, Korea
TEL : 82-2-501-3939
FAX : 82-2-578-2716
Homepage://www.inbody.com
E-mail : info@inbody.com
Biospace Japan Inc. [JAPAN]
Second Floor Ayabe Bldg., 2-17-3 Sotokanda, Chiyoda-ku, Tokyo JAPAN
TEL : 81-03-5298-7667
FAX : 81-03-5298-7668,7669
Homepage : http://www.biospace.co.jp
E-mail : biospace@biospace.co.jp
Biospace Inc. [U.S.A]
8820 Wilshire Blvd. Suite 310 Beverly Hills, CA 90211 U.S.A
TEL : 1-310-358-0360
FAX : 1-310-358-0370
Homepage : http://www.biospaceamerica.com
E-mail : USA@biospaceamerica.com
EU Representative. [Europe]
DongBang Acuprime.
Gater House, Gater Lane, Palace Gate, Exeter, EX1 1JL, UK
TEL : 44-1392- 273908
FAX : 44-1392- 273909
E-mail : info@acuprime.com
Biospace China. [CHINA]
Block A, 26/F, Hai Xing plaza, No. 1 South Ruijin Road, Shanghai 200023, CHINA
TEL : 86-21-64439738, 9739, 9705
FAX : 86-21-6443906
Homepage : http://www.biospacechina.com
E-mail : admin@ biospacechina.com
21


---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 36
Page Mode                       : UseNone
Page Layout                     : OneColumn
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:56c53b89-8345-40ef-9168-85c5ab45364d
Producer                        : doPDF Ver 7.2 Build 370 (Windows XP Professional Edition  (SP 2) - Version: 5.1.2600 (x86))
Create Date                     : 2012:01:30 18:33:55+09:00
Modify Date                     : 2013:02:25 18:08:23+09:00
Metadata Date                   : 2013:02:25 18:08:23+09:00
Document ID                     : uuid:b0b27ea6-b236-4a5c-98fc-a67541181f8d
Format                          : application/pdf

EXIF Metadata provided by EXIF.tools