InnoSenT 2 Doppler Radar Module User Manual Installation Manual

InnoSenT GmbH Doppler Radar Module Installation Manual

Installation Manual

Download: InnoSenT 2 Doppler Radar Module User Manual Installation Manual
Mirror Download [FCC.gov]InnoSenT 2 Doppler Radar Module User Manual Installation Manual
Document ID1436119
Application ID89wFgPbyGFQYdwNpRKEawg==
Document DescriptionInstallation Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize14.62kB (182787 bits)
Date Submitted2011-03-23 00:00:00
Date Available2011-03-23 00:00:00
Creation Date2011-02-03 10:23:19
Producing SoftwareAdobe PDF Library 9.0
Document Lastmod2011-02-03 10:23:21
Document TitleInstallation Manual
Document CreatorAcrobat PDFMaker 9.1 für Word
Document Author: Baeuerlein

_____________________________________________________________________________________________________
User Manual
Product Family:
Range of use:
Low Cost K-Band Transceiver
Security- / Door- applications
Module Number:
IPS-265_F
_____________________________________________________________________________________________________
Description:
♦
♦
♦
♦
♦
♦
radar-based motion detector
available in different frequency ranges: Standard; _F and _UK variants
advanced PHEMT-oscillator with low current consumption
split transmit and receive path for maximum gain
dual (stereo channel) operation
very small outline dimensions
Block Diagram:
Oscillator
Tx
I/Q-Mixer
Rx
S1 S2
Environmental Tests and Handling Precautions:
♦ This InnoSenT sensor is sensitive to damage from ESD.
♦ Normal precautions as usually applied to CMOS devices are sufficient when handling the
device. Touching the signal output pins has to be avoided at any time before soldering or
plugging the device into a motherboard
♦ Applying multimeters e.g. for resistance measurement between any of the connector pins
may cause damage to the module.
1 von 3
DATA SHEET IPS-265_F
11-01-2011
Version 0.3
Electrical Characteristics:
Parameter
Symbol
min.
f IPS-265_F
∆f
P out
Vcc
Icc
24.075
typ.
max.
units
comment
24.175
40
GHz
MHz/°C
dBm
mA
120
300
db
°
mV
60
°C
mm
compare drawing
°
°
dB
dB
azimuth
elevation
azimuth
elevation
Transmitter
transmit frequency
temperature drift frequency
output power
positive supply voltage
positive supply current
-1
16
30
Receiver
I/Q-balance
IF-output
amplitude
phase
voltage offset
60
-300
90
Environment
operating temperature
outline dimensions
T OP
-20
~ 25 x 25 x 7 (12.7)
Antenna
antenna pattern (-3 dB)
side lobe suppression
horizontal
vertical
horizontal
vertical
80
32
13
13
Mechanical Outlines:
2 von 3
DATA SHEET IPS-265_F
11-01-2011
Version 0.3
Interface:
The sensor provides a 2.54 mm grid, single row pin header (square pin  0.635 mm).
Pin
Function
Description
NC
VCC
IF1
GND
IF2
not connected
supply voltage 5V
signal 1 output
GND
signal 2 output
Certification and environment protection:
InnoSenT GmbH has established and applies a quality system for:
Development, production and sales of radar sensors for commercial and industrial sensors
An audit was performed, Report No. 010350 Proof has been furnished that the requirements
according to DIN EN ISO 9001:2000 are fulfilled.
This InnoSenT product is compliant to the restriction of hazardous substances
(RoHs – European Union directive 2002/95/EG).
FCC approval
•
This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry Canada.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired
operation.
•
Warning: Changes or modifications made to this equipment not expressly approved by InnoSenT GmbH may void the
FCC authorization to operate this equipment.
•
Manufacturers of mobile or fixed devices incorporating IPS-265_F modules are authorized to use the FCC Grants and IC
Certificates of the IPS-265_F modules for their own final products according to the conditions referenced in these
documents. In this case, the FCC label of the module shall be visible from the outside, or the host device shall bear a
second label stating "Contains FCC ID: UXS2" and "Contains IC: 5904A-UXS2".
Contact Information:
InnoSenT GmbH
Am Roedertor 30
97499 Donnersdorf
Germany
3 von 3
Phone:
Fax:
+49 (0) 9528-9518-0
+49 (0) 9528-9518-99
DATA SHEET IPS-265_F
E-Mail:
Web:
info@InnoSenT.de
www.InnoSenT.de
11-01-2011
Version 0.3

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : Baeuerlein
Comments                        : 
Company                         : InnoSenT GmbH
Create Date                     : 2011:02:03 10:23:19+01:00
Modify Date                     : 2011:02:03 10:23:21+01:00
Source Modified                 : D:20110111142950
Subject                         : 
Tag Ad Hoc Review Cycle ID      : 1896367172
Tag Author Email                : stefan.baeuerlein@innosent.de
Tag Author Email Display Name   : Stefan Bäuerlein
Tag Email Subject               : Pflichtenheft
Tag Reviewing Tools Shown Once  : 
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Metadata Date                   : 2011:02:03 10:23:21+01:00
Creator Tool                    : Acrobat PDFMaker 9.1 für Word
Document ID                     : uuid:70f6bc0b-4691-4547-95c1-41d3359747e2
Instance ID                     : uuid:7302e29e-2994-4aa1-97ad-28eb6dc0cbc2
Format                          : application/pdf
Title                           : 
Description                     : 
Creator                         : Baeuerlein
Producer                        : Adobe PDF Library 9.0
Keywords                        : 
Page Layout                     : OneColumn
Page Count                      : 3
EXIF Metadata provided by EXIF.tools
FCC ID Filing: UXS2

Navigation menu