InnoSenT IPS154US K-Band Transceiver Module User Manual 154 US User Manual
InnoSenT GmbH K-Band Transceiver Module 154 US User Manual
InnoSenT >
User Manual
User Manual Product Family: K-Band Transceivers K-Band Transceiver with two integrated patch antennas and IF-pre-amplifier IPS-154_US Description: radar-based motion detector advanced PHEMT-oscillator with low current consumption split transmit and receive path for maximum gain stereo (dual channel) operation for direction of motion identification IF-pre-amplifier, bandwidth limited for lowest noise performance economic flat-pack housing, extra small outline dimensions enable input for oscillator shut down Absolute Maximum Ratings: Parameter supply voltage operating temperature (out of spec) storage temperature Symbol VCC TOP TSTG Rating 5.5 - 40 / + 85 + 90 Units °C °C Electrical Characteristics: Parameter output power (EIRP) temperature drift antenna pattern side lobe suppression I/Q balance IF output IF-amplifier supply voltage supply current operating temperature outline dimensions Version 1.0 2007-06-06 Symbol fIPS-154_US Pout ∆f horizontal vertical horizontal vertical amplitude phase voltage offset gain bandwidth VCC TOP min. 24.075 60 1.0 4.75 typ. 24.125 16 -1 45 38 13 13 90 2.2 20 DC – 50 5.0 35 - 20 44 x 30 x 8.3 (19) IPS-154_US max. 24.175 20 120 4.0 5.25 50 + 60 units GHz dBm MHz/°C ° ° dB dB dB ° dB kHz mA °C mm comment azimuth elevation azimuth elevation compare drawing page 1 of 3 Interface: Pin # 10 Description NC enable VCC GND IF1 IF2 NC NC GND NC In/Out input input input output output input 0.635 mm). Comment not connected active low supply voltage (+5 V) analog ground Signal I(nphase) Signal Q(uadrature) not connected not connected analog ground not connected azimuth elevation The sensor provides a 2.54 mm grid, single row pin header (square pin Mechanical Outlines: (dimensions in mm) Certification and environment protection: InnoSenT GmbH has established and applies a quality system for: Development, production and sales of radar sensors for commercial and industrial sensors An audit was performed, Report No. 010350 Proof has been furnished that the requirements according to DIN EN ISO 9001:2000 are fulfilled. This InnoSenT product is compliant to the restriction of hazardous substances (RoHs – European Union directive 2002/95/EG). Version 1.0 2007-06-06 IPS-154_US page 2 of 3 FCC approval • The product variant IPS-154_US device complies with Part 15 of the FCC Rules and with RSS-210 of Industry Canada. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. • Warning: Changes or modifications made to this equipment not expressly approved by InnoSenT GmbH may void the FCC authorization to operate this equipment. • Manufacturers of mobile or fixed devices incorporating IPS-154 modules are authorized to use the FCC Grants and IC Certificates of the IPS-154 modules for their own final products according to the conditions referenced in these documents. In this case, the FCC label of the module shall be visible from the outside, or the host device shall bear a second label stating "Contains FCC ID: UXS-IPS154US". Contact Information: InnoSenT GmbH Am Roedertor 30 97499 Donnersdorf Germany Version 1.0 2007-06-06 Phone: +49 (0) 9528-9518-0 Fax: +49 (0) 9528-9518-99 IPS-154_US E-Mail: info@InnoSenT.de Web: www.InnoSenT.de page 3 of 3
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No Page Count : 3 Producer : GNU Ghostscript 7.06 Title : 154_US_User_Manual Creator : PDFCreator Version 0.8.0 Create Date : 2007:07:20 11:12:45 Author : Baeuerlein_Stefan Modify Date : 2007:07:20 11:12:45 Subject :EXIF Metadata provided by EXIF.tools