InnoSenT IVS979 24 GHz Doppler Module User Manual Installation Manual

Download:
Mirror Download [FCC.gov]
Document ID	1878810
Application ID	IbinuMJ3XsBZHSTYK7Zc2w==
Document Description	Installation Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	27.65kB (345683 bits)
Date Submitted	2013-01-15 00:00:00
Date Available	2013-01-15 00:00:00
Creation Date	2013-01-15 12:42:44
Producing Software	GPL Ghostscript 8.61
Document Lastmod	2013-01-15 12:42:44
Document Title	120315_Datenblatt_IVS-979 V1.0 - InstallationManual.indd
Document Creator	Adobe InDesign CS5 (7.0)
Document Author:	maidhof_martin

InnoSenT sets standards – worldwide
Installaon Manual
IVS-979
Version 1.0 - 15.03.2012
Product Family
Applicaons
K-Band VCO Transceiver with advanced MMIC technology
» Traffic Monitoring
Movement
Velocity
Direc!on
Presence
Distance
Angle
Features:
Cer!ficates
The IVS-979 is a K-Band VCO Transceiver
with advanced SiGe MMIC technology that
can be operated in FSK and FMCW mode.
InnoSenT GmbH has established and applies
a quality system for: development, produc!on and sales of radar sensors for commercial and industrial sensors.
The sensor provides a special RF-design for
maximum sensi!vity in long range applica!ons such as traffic monitoring or speed
enforcement.
Another smart new feature is the 1/x divider
output for VCO tuning slope lineariza!on.
An audit was performed, Report No. 010350
Proof has been furnished
that the requirements
according to DIN EN ISO
9001:2000 are fulfilled.
Version 1.0
Descrip!on
DATA SHEET IVS-979
» K-Band VCO Transceiver with advanced SiGe MMIC technology
» FSK / FMCW modes
» 1/x divider for reference frequency output
» stereo (dual channel) opera!on to detect direc!on of mo!on
» integrated RF-pre-amplifier
CONFIDENTIAL AND PROPRIETARY
The informa!on contained in this document shall remain the sole and exclusive property of InnoSenT GmbH and shall
not be disclosed by the recipient to third par!es without prior consent of InnoSenT in wri!ng.
Page 1
This product is compliant to
the restric!on of hazardous
substances (RoHS - European
Union direc!ve 2002/95/EG)
InnoSenT sets standards – worldwide
Handling Precau"ons
This InnoSenT sensor is sensi#ve to damage from ESD.
Normal precau#ons as usally applied to CMOS devices are sufficient when handling this device.
Touching the signal output PINs has to be avoided at any #me before soldering or plugging the
device into a motherboard.
Electrical Characteris"cs
Parameter
Symbol
Min.
Typ.
Max.
Units
Comment
GHz
depending on Vtune
Oscillator
transmit frequencies
varactor tuning voltage
Vtune
24.000 - 24.250
tuning bandwidth fine
DC
500k
Hz
tuning bandwidth coarse
DC
0.4
Hz
input impedance Vtune fine
kΩ
200pf ESD protec#on
input impedance Vtune coarse
kΩ
200pf ESD protec#on
tuning slope coarse
340
552
766
MHz/V
tuning slope fine
59
96
133
MHz/V
-4
-5
MHz/°C
Pou-ETSI
20
dBm
@ room-temperature
Pout of band
-30
dBm
@ room-temperature
temperature dri$ frequency
ouput power (EIRP)
out of band radia#on (EIRP)
Δf
divider ra#o factory se&ng
for example 24.200GHz
lead to 1.18MHz
1,280
Receiver
bandwidth
40
100
output impedance
signal level
IF-output
I/Q balance
dB
2.5M
part number LT6204
Hz
100
Ω
S I/Q
t.b.d.
mV
@ InnoSenT Test setup
R I/Q
t.b.d.
mV
@ InnoSenT Test setup
voltage offset
1.65
amplitude
phase
70
95
dB
120
°
Antenna pa!ern (compare with antenna pa!ern on page 4)
antenna pa*ern (@3dB)
side lobe suppression
horizontal
°
azimuth
ver#cal
28
°
eleva#on
horizontal
15
dB
azimuth
ver#cal
15
dB
eleva#on
max. 1mVPP ripple
170
mA
Power Supply
supply voltage
VCC
supply current
ICC
5.3
5.5
DATA SHEET IVS-979
gain
Version 1.0
IF-amplifier
Environment
TOP
-30
+60
°C
storage temperature
TSTG
-30
+85
°C
outline dimensions
120 x 72.5 x 10.65 (17.7)
mm
compare drawing
CONFIDENTIAL AND PROPRIETARY
The informa#on contained in this document shall remain the sole and exclusive property of InnoSenT GmbH and shall
not be disclosed by the recipient to third par#es without prior consent of InnoSenT in wri#ng.
Page 2
opera#ng temperature
InnoSenT sets standards – worldwide
Tx - antenna paern
-5
output power [dBm]
-10
-15
-20
-25
-30
-35
-40
-180,0
-150,0
-120,0
-90,0
-60,0
-30,0
0,0
30,0
60,0
90,0
120,0
150,0
180,0
angle [°]
Parameter
Symbol
full beam width @ -3dB
side-lobe suppression
Min.
Typ.
Max.
Units
horizontal
°
ver!cal
28
°
horizontal
15
dB
vertical
15
dB
Comment
Interface
Descrip!on
In / Out
Comment
MUXOUT
OUT-digital
reference signal VCO frequency already divided by prescaler
GND
VCC
IN-analog
5.5V supply voltage
SPI_CLOCK
IN-digital
SPI-clock
SPI_DATA
IN-digital
SPI-data
PLL_LE
IN-digital
latch enable PLL
d.n.c.
CUST_PROG_LE
IN-digital
enable customer programming (ac!ve low)
d.n.c.
IN-digital
do not connect
10
d.n.c.
do not connect
11
d.n.c.
do not connect
12
Q-SIGNAL
OUT-analog
IF-output-signal
13
I-SIGNAL
OUT-analog
IF-output-signal
14
Vtune coarse
IN-analog
tuning voltage for coarse tuning VCO
15
Vtune fine
IN-analog
tuning voltage for fine tuning VCO
ground
CONFIDENTIAL AND PROPRIETARY
The informa!on contained in this document shall remain the sole and exclusive property of InnoSenT GmbH and shall
not be disclosed by the recipient to third par!es without prior consent of InnoSenT in wri!ng.
Version 1.0
do not connect
Page 3
Pin #
DATA SHEET IVS-979
The sensor provides a 2.54mm grid pin header.
InnoSenT sets standards – worldwide
Mechanical Outlines
All dimensions in mm
•
OEM Integrator must ensure that the end user manual may not contain any informa"on
about the way to install or remove the module from the final product.
•
Depending on the final host device addi"onal authoriza"on requirements for the nontransmi#er func"ons of the transmi#er module may be required (i.e., Verifica"on, or Declara"on
of Conformity) The OEM integrator is responsible for ensuring that a$er the module is installed and
opera"onal the host con"nues to be compliant with the Part 15B uninten"onal radiator requirements.
•
The informa"on on the label and in the user manual is required to be incorporated in
the user manual of the final host. see 47 CFR15 requirements for more details (e.g. 15.19 / 15.21 /
15.101 / 15.105 / RSS-GEN / ICES)
Version 1.0
The use of the transceiver module is authorized in mobile or fixed host devices taking into account
the condi"ons listed below:
DATA SHEET IVS-979
Changes or modifica"ons made to the equipment not expressly approved by InnoSenT GmbH
may void the FCC / IC authoriza"on to operate this equipment.
•
Addi"onal label with the words ‘Contains FCC ID:AAABBBBB’ and ‘Contains IC:AAAA-BBBB’
shall be applied and visible from the outside of the host product.
•
The module must be installed and used in strict accordance with the manufacturer’s instruc"ons as described in the user documenta"on that comes with the module.
Page 4
•
The end user manual for the final host product opera"ng with this transmi#er must include opera"ng instruc"ons to sa"sfy RF exposure compliance requirements. e.g
InnoSenT sets standards – worldwide
Radiofrequency radia"on exposure Informa"on:
This equipment complies with FCC radia"on exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between
the radiator and your body.
This transmi#er must not be co-located or opera"ng in conjunc"on with any other antenna or
transmi#er.
•
When the final host product opera"ng with this transmi#er deviate from above, installa"on of this module into specific final hosts may require the submission of a Class II permissive change
applica"on containing data per"nent to RF Exposure, spurious emissions, ERP/EIRP, and host/module authen"ca"on, or new applica"on if appropriate.
Feel free to contact us if addi"onal guidance is required.
Manual Requirements according 15.19 / RSS-GEN
This device complies with Part 15 of the FCC Rules [and with Industry Canada licence-exempt RSS
standard(s)].
Opera"on is subject to the following two condi"ons:
(1)
this device may not cause harmful interference, and
(2)
this device must accept any interference received, including interference that may cause
undesired opera"on.
Manual Requirements according 15.21
Changes or modifica"ons made to this equipment not expressly approved by (manufacturer name)
may void the FCC authoriza"on to operate this equipment.
The technical specifica"ons of this Data Sheet are approved by:
InnoSenT GmbH
Am Rödertor 30
97499 Donnersdorf
GERMANY
Version 1.0
This Data Sheet contains the technical specifica"ons of the described product. Changes of the
specifica"on must be in wri#en form. All previous versions of this Data Sheet are no longer valid.
DATA SHEET IVS-979
Approval
Page 5
Contact Informaon
InnoSenT GmbH | Am Roedertor 30 | 97499 Donnersdorf | Germany
Phone: +49 (0) 9528-9518-0 | Fax: +49 (0) 9528-9518-99 | E-Mail: info@innosent.de
www.innosent.de

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Page Count                      : 5
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : 2cc76d25-6164-11e2-0000-8c14f6f16314
Producer                        : GPL Ghostscript 8.61
Modify Date                     : 2013:01:15 12:42:44+01:00
Create Date                     : 2013:01:15 12:42:44+01:00
Creator Tool                    : Adobe InDesign CS5 \(7.0\)
Document ID                     : 2cc76d25-6164-11e2-0000-8c14f6f16314
Format                          : application/pdf
Title                           : 120315_Datenblatt_IVS-979 V1.0 - InstallationManual.indd
Creator                         : maidhof_martin
Author                          : maidhof_martin

EXIF Metadata provided by EXIF.tools