Inovonics Wireless 3B6ETOEMM wireless transmitter module User Manual FCCRFModuleChapter

Inovonics Wireless Corporation wireless transmitter module FCCRFModuleChapter

Users Manual

1Inovonics Wireless Confidential: Subject to Non-Disclosure AgreementRF Module1.1 IntroductionEchoStream RF modules allow the assimilation of any user-specific application into an EchoStream system. The RF modules can be integrated with your existing product to provide you with complete EchoStream functionality.1.1.1 E*1941 One-Way RF ModuleThe E*1941 is a universal one way RF module with a two alarm input pins, allowing for the use of dual inputs. Input one is the primary alarm, bit 0; input two is the secondary alarm bit 1. Figure 1-1 E*1941 Dual-Input Universal Transmitter ComponentsN/O - N/C selection pins Place a jumper to select whether the inputs are normally open or normally closed.Serial output Connects a serial device to output RF messages from the ES1941.Serial input Connects a serial device to input RF messages to the ES1941.Serial OutputSerial InputPrimary AlarmSecondary Alarm Tamper InputReset InputPowerGroundN/O- N/C Selection Pins1.3”2.525”Mounting Hole
Introduction2Inovonics Wireless Confidential: Subject to Non-Disclosure AgreementSecondary alarm Connects a secondary end-device to provide RF alarm data for any user-specific application.Tamper input Connects a tamper input to send a message when user-specific end-device is tampered with.Reset input Connects a reset input, to reset the RF module after a frequency band selection change or N/O - N/C selection change.Power The E*1941 has an on-board voltage regulator. Connect power cabling to an external power supply of 2.5 to 5.5 volts. Voltage must be sustained at 2.5 volts or above and supply 50 milliamps during the transmit cycle.Ground Connects a ground.Primary alarm Connects a primary end-device to provide RF alarm data for any user-specific application.Mounting Hole Used to mount the RF module to the user-specific product. The mounting hole should only be used with a nylon standoff, never metal.Connection Output Jumper N/O Output Jumper N/CPrimary Alarm Open Alarm Clear AlarmGround Alarm Alarm ClearSecondary Alarm Open Alarm Clear AlarmGround Alarm Alarm ClearTamper Open Alarm AlarmGround Alarm Clear Alarm ClearReset Open for normal operation; connect to the ground and release for a board reset.
RF Module3Inovonics Wireless Confidential: Subject to Non-Disclosure Agreement1.1.2 FCC Label RequirementsInovonics Wireless has received Federal Communications Commission (FCC) and Industry Canada (IC) approval to market RF modules. The application integrator is responsible for properly labeling the product containing the RF module. Labels must be placed on the outside of the product, and must include the FCC registration number, the IC registration number and the FCC statement as shown in the sample label below:

Navigation menu