Inovonics Wireless 3B6ETOEMM wireless transmitter module User Manual FCCRFModuleChapter

Inovonics Wireless Corporation wireless transmitter module FCCRFModuleChapter

Users Manual

Download: Inovonics Wireless 3B6ETOEMM wireless transmitter module User Manual FCCRFModuleChapter
Mirror Download [FCC.gov]Inovonics Wireless 3B6ETOEMM wireless transmitter module User Manual FCCRFModuleChapter
Document ID523594
Application IDunbnFrObGAtrpSgKSVly9A==
Document DescriptionUsers Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize10.15kB (126933 bits)
Date Submitted2005-03-15 00:00:00
Date Available2005-05-24 00:00:00
Creation Date2005-01-26 13:53:36
Producing SoftwareAcrobat Distiller 6.0 (Windows)
Document Lastmod2005-01-26 13:53:36
Document TitleFCCRFModuleChapter.fm
Document CreatorPScript5.dll Version 5.2
Document Author: BWhitmer

RF Module
1.1 Introduction
EchoStream RF modules allow the assimilation of any user-specific application into an
EchoStream system. The RF modules can be integrated with your existing product to
provide you with complete EchoStream functionality.
1.1.1 E*1941 One-Way RF Module
The E*1941 is a universal one way RF module with a two alarm input pins, allowing for
the use of dual inputs. Input one is the primary alarm, bit 0; input two is the secondary
alarm bit 1.
N/O- N/C
Selection Pins
Mounting Hole
Serial Output
Serial Input
Secondary
Alarm
Tamper Input
Power
Reset Input
1.3”
Ground
Primary
Alarm
2.525”
Figure 1-1 E*1941 Dual-Input Universal Transmitter Components
N/O - N/C selection pins
Place a jumper to select whether the inputs are normally open
or normally closed.
Serial output Connects a serial device to output RF messages from the ES1941.
Serial input Connects a serial device to input RF messages to the ES1941.
Inovonics Wireless Confidential: Subject to Non-Disclosure Agreement
Introduction
Connects a secondary end-device to provide RF alarm data for any
user-specific application.
Tamper input Connects a tamper input to send a message when user-specific end-device
is tampered with.
Reset input Connects a reset input, to reset the RF module after a frequency band
selection change or N/O - N/C selection change.
Power The E*1941 has an on-board voltage regulator. Connect power cabling to an
external power supply of 2.5 to 5.5 volts. Voltage must be sustained at 2.5 volts or above
and supply 50 milliamps during the transmit cycle.
Ground Connects a ground.
Primary alarm Connects a primary end-device to provide RF alarm data for any userspecific application.
Mounting Hole Used to mount the RF module to the user-specific product. The
mounting hole should only be used with a nylon standoff, never metal.
Secondary alarm
Connection
Output Jumper N/O
Output Jumper N/C
Open
Alarm Clear
Alarm
Ground
Alarm
Alarm Clear
Open
Alarm Clear
Alarm
Ground
Alarm
Alarm Clear
Open
Alarm
Alarm
Ground
Alarm Clear
Alarm Clear
Primary Alarm
Secondary Alarm
Tamper
Reset
Open for normal operation; connect to the ground and release for a board
reset.
Inovonics Wireless Confidential: Subject to Non-Disclosure Agreement
RF Module
1.1.2 FCC Label Requirements
Inovonics Wireless has received Federal Communications Commission (FCC) and
Industry Canada (IC) approval to market RF modules. The application integrator is
responsible for properly labeling the product containing the RF module. Labels must be
placed on the outside of the product, and must include the FCC registration number, the
IC registration number and the FCC statement as shown in the sample label below:
Inovonics Wireless Confidential: Subject to Non-Disclosure Agreement

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Page Count                      : 3
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:d086632e-0644-457f-b628-ee6f89553ba4
Producer                        : Acrobat Distiller 6.0 (Windows)
Create Date                     : 2005:01:26 13:53:36-07:00
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2005:01:26 13:53:36-07:00
Document ID                     : uuid:64278087-2d74-428c-baab-fda53710ece5
Format                          : application/pdf
Title                           : FCCRFModuleChapter.fm
Creator                         : BWhitmer
Author                          : BWhitmer
EXIF Metadata provided by EXIF.tools
FCC ID Filing: HCQ3B6ETOEMM

Navigation menu