Intech Electronics CS8066 Bluetooth Car Kit User Manual MCB 8041010 0B

Download:
Mirror Download [FCC.gov]
Document ID	600498
Application ID	qx+s8ejNmz+6rEIDdnI4cA==
Document Description	Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	43.31kB (541369 bits)
Date Submitted	2005-11-08 00:00:00
Date Available	2005-11-08 00:00:00
Creation Date	2005-09-22 17:08:42
Producing Software	Acrobat Distiller 6.0 (Windows)
Document Lastmod	2005-10-31 13:16:53
Document Title	MCB-8041010-0B(user manual).cdr
Document Creator	PScript5.dll Version 5.2
Document Author:	kefenchen

I-2 Functions (please refer to Fig.1)
! Volume Down (S3)
CS8041
◎ Redial the last dialed number
◎ Decrease the speaker volume
TM
! LED
◎ There are two LED colors (green and red) to indicate the state of this
Car Kit.
! On/Off (S1)
If you press S1, you can:
◎ Switch on and Off
◎ Pair
◎ Answer a new call
◎ Reject a call
◎ Make a new call using voice dialing
BT 70K
Bluetooth Hands-free Car Kit
! Volume Up (S2)
◎ Increase the speaker volume
◎ Mute/un-mute the microphone
User Manual
! Power Connector
◎ Connect the Car Kit with the cigarette lighter and power the Car
Kit.
http://www.abe-hk.com
II. How to Use( e . g . Nokia 3650 or equivalent models )
Table of Content
I. Profile and Functions………...………………………………………………………..…1
I-1 Profile……………………………………………………………………………….…1
I-2 Functions…..…………………………………………………………………….……2
II. How to Use! ………………………………………………………………………………3
II-1 Installation of the Hands-free Car Kit .……...…..………………………..…..3
II-2 Turn on the Hands-free Car Kit……………………………………………….……4
II-3 Pair the Hands-free Car Kit with Your Bluetooth Mobile Phone………….……4
II-4 Establish Bluetooth Link……………………………………………………..……..5
II-5 Answer an Incoming Call……………………………………………………..…….5
II-6 Transfer Calls between This Hands-free Car Kit and Your Bluetooth Phone...5
II-7 Make a New Call by Using Voice Dialing…………………………………………6
II-8 Mute the Microphone………………………………………………………….……7
II-9 End a Call...………...……………………………………………………………….7
II-10 Reject a Call………………………………………………………………………..7
II-11 Redial Last Dialed Number………………………………………….……………7
II-12 Adjust the Speaker Volume……………………………………………………….7
II-13 Turn off the Hands-free Car Kit……………………………………..……………8
III. Maintenance and Safe Use ………………………………………………………….8
FCC Interference Statement….…...........…………..……………………………………9
...
Declaration of conformity.….…….…..….….….….….….….….….….….….….….…10
Fig.2
II-1 Installation of the Hands-free Car Kit (please refer to Fig.2)
Thank you for buying the Abe BT 70K, Bluetooth Hands-free Car Kit.
Whenever you use the Hands-free Car Kit, turn on the electrical system of
your car and plug the Car Kit into the cigarette lighter socket in your car to get
power. Tilt and adjust the flexible shaft to a desired position for easy
communication.
II-2 Turn on the Hands-free Car Kit
I. Profile and Functions
If t he Hands-free Car Kit is powered off, press and hold S1 for 4 seconds. A
low tone followed by a high tone will indicate the hands-free Car Kit has turned
on. At the same time, Green LED will flash for a second. And then, green LED
will keep on flashing every 3 seconds.
I-1 Profile (Fig.1)
II-3 Pair the Hands-free Car Kit with Your Bluetooth Mobile Phone
1. Put the hands-free Car Kit in pairing mode
When the hands-free Car Kit is powered off, press and hold S1 for 8
seconds. In the first 4 seconds, a low tone followed by a high tone will
indicate the hands-free Car Kit has turned on. At the same time, Green
LED will flash for a second. In the 2nd 4 seconds, a high tone will occur.
Then the red and green LEDs will flash alternatively, which indicates the
hands-free Car Kit has entered into the paring mode.
2. Put your B luetooth mobile phone in pairing mode
2.1 Follow the operation manual of your Bluetooth mobile phone to start
the pairing process. Typically, this has to be done by going to a setup
or connect menu and then selecting the options to discover
Bluetooth devices. Bluetooth may take several seconds to establish
a connection.
Fig. 1
1.Volume Down (S3)
2. LED
3. On/Off ( S1)
4. Built-in Microphone
5. Volume Up (S2)
6. Speaker
7. Flexible Shaft
8 . Spring
9 . Power Connector
2..2 Your phone's display will indicate that it has found the new device
“BT 7 0K” and asks if you want to pair it. You should confirm this.
The phone's display would demand a passkey or PIN, then you can
enter a sequence of “0000”.
3. Pair the hands-free Car Kit with your Bluetooth mobile phone
The green LED of hands-free Car Kit will flash every 3 seconds
indicating successful pairing. Usually the phone will also ask whether
you want to change the Car Kit's name. We recommend you should
approve the name of “BT 7 0K” and do not change it.
Notice: If pairing does not occur as expected, turn off the hands-free Car
Kit and your phone, then wait for 10 seconds. Turn them on again and
repeat from Step 1 to Step 3.
II-4 Establish Bluetooth Link
After pairing, the mobile phone will show “connect”, then please select
“YES” to establish the link. Now you are ready to make and answer calls
on the hands-free Car Kit.
Notice: For other phones, please follow their operation manuals to
establish the link!
II-13 Turn off the Hands-free Car Kit
When the hands-free Car Kit is on, press and hold S1 for 3 seconds. A high
tone followed by a low tone will indicate that the Car Kit is powered off. Red
LED will turn on for a second. At last LED will turn off when the Car Kit is
powered off.
III. Maintenance and Safe Use
◎ Use dry cloth to clean hands-free Car Kit!
◎ Do not expose the Car Kit to liquid or moisture!
◎ Do not expose the Car Kit to fire or open flames!
Note:
BQB, CE and FCC approved
The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and
any use of such marks by In-Tech Electronics Ltd is under license. Other
trademarks and trade names are those of their respective owners.
II-5 Answer an Incoming Call
When an incoming call is present, the hands-free Car Kit will ring. Press
S1 and you can answer the call. The green LED will continue to flash
once a second while the call is in session.
II-6 Transfer Calls between This Hands-free Car Kit and Your
Bluetooth Phone
When you are in session, calls can be transferred from your Bluetooth
phone to the hands-free Car Kit and vice versa.
1. From Bluetooth phone to the Car Kit
Press S1 once, the call will be transferred to the Car Kit.
2. From Car Kit to the Bluetooth Phone
Please follow the operation manual of your phone.
Federal Communication Commission
Interference Statement
1. When using a Bluetooth mobile phone:
1.1 Press S1 on the hands-free Car Kit shortly
Notice: Make sure that the voice dialing function is probably set up in
the mobile phone and it is within the range of the hands-free Car Kit.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one of the following measures:
1.2 Put through the call
After the beep tone on the hands-free Car Kit, you can make a voice
dial by saying the name of the person on the hands-free Car Kit. The
call will be connected in a few seconds.
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
II-7 Make a New Call by Using Voice Dialing
2. When using a mobile phone without Bluetooth built-in and
requiring a Bluetooth dongle:
2.1 Press S1 on the hands-free Car Kit shortly.
Notice: Make sure that the voice dialing function is probably set up in
the Mobile phone and it is within the range of the hands-free Car Kit.
2.2 Put through the call
After the beep tone on the hands-free Car Kit, you can make a voice
dial and the call will be connected in a few seconds.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
FCC Caution: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate this equipment.
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
This transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
II-8 Mute the Microphone
1. To mute the microphone
Press S2 for about 2 seconds and a beep tone will indicate the
microphone is muted. A periodic beep tone will be heard while the mute
function is active.
2. To un-mute the microphone
When the microphone is muted, press S2 for about 2 seconds. Then the
mute function will end and the periodic beep tone will stop.
II-9 End a Call
While a call is in session on the hands-free Car Kit, press S1 and you will
disconnect the call. After the call is disconnected, the green LED will
flash normally.
II-10 Reject a Call
When the hands-free Car Kit is ringing, press S1 until you hear a long beep
tone.
Declaration of Conformity (DoC)
In-Tech Electronics Ltd
Unit 7-10,2/F Century Centre, 44-46 Hung To Road,
Kwun Tong, Kowloon, Hong Kong .
We,
declare that the following product(s):
Product Description:
Model Number:
Bluetooth Car Kit Cigarette Type
BT70K
is/are conformed to comply with the protection requirements of the Directive(s):
EC Low Voltage Directive
EC EMC Directive
EC EMC Directive Amendment
e-mark Directive Amendment
73/23/EEC
89/336/EEC
92/31/EEC & 93/68/EEC
95/54/EEC
Test Standards:
EN 301 489-1 v.1.2.1: 2000, EN 301 489-17 v.1.2.1: 2000
EN 300 328-1 v.1.4.1: 2001, EN 300 328-2 v.1.4.1: 2001
EN 60950: 2000
FCC Part 15C & 15B
AN/NZA 4771
ECE R-10
I understand that the manufacturer would take all the responsibilities for the above product(s).
II-11 Redial Last Dialed Number
To redial the last dialed number, press S3 for 2 seconds. Short low tones will
indicate an attempt to redial.
For and on behalf of
Hong Kong
II-12 Adjust the Speaker Volume
While a call is in session, pressing and releasing S2 will increase the speaker
volume, and pressing and releasing S3 will decrease the speaker volume.
Authorized person
Location
Name:
Peter Ho
Position:
R&D Manager
th
Date of issue: August 10 , 2005
* I hereby declare that I am entitled to sign on behalf of the applicant and that the information
supplied is correct and complete.
10

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Encryption                      : Standard V1.2 (40-bit)
User Access                     : Print, Copy, Fill forms, Extract, Assemble, Print high-res
Modify Date                     : 2005:10:31 13:16:53+08:00
Create Date                     : 2005:09:22 17:08:42+08:00
Page Count                      : 2
About                           : uuid:96112786-8851-4472-826f-d0c6c44042c6
Producer                        : Acrobat Distiller 6.0 (Windows)
Creation Date                   : 2005:09:22 17:08:42+08:00
Mod Date                        : 2005:10:31 13:16:53+08:00
Author                          : kefenchen
Creator Tool                    : PScript5.dll Version 5.2
Metadata Date                   : 2005:10:31 13:16:53+08:00
Document ID                     : uuid:7569fec1-6066-4b60-b88f-077c006cb9fa
Format                          : application/pdf
Title                           : MCB-8041010-0B(user manual).cdr
Creator                         : kefenchen
Has XFA                         : No

EXIF Metadata provided by EXIF.tools