Integrated Display Technology WW338 2.4GHz FHSS Cordless Phone w/ CID User Manual manual E1 p65

Download:
Mirror Download [FCC.gov]
Document ID	461359
Application ID	b1NgNdMSxg6hW5g63fpr1A==
Document Description	FCC Information
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	71.9kB (898812 bits)
Date Submitted	2004-08-19 00:00:00
Date Available	2004-08-19 00:00:00
Creation Date	2004-08-02 11:35:03
Producing Software	Acrobat Distiller 5.0 (Windows)
Document Lastmod	2004-08-05 14:55:04
Document Title	manual-E1.p65
Document Creator	PageMaker 6.5C
Document Author:	POLLY

EN
ABOUT OREGON SCIENTIFIC
Visit our website (www.oregonscientific.com) to
learn more about Oregon Scientific products such
as digital cameras; MP3 players; children's
electronic learning products and games; projection
clocks; health and fitness gear; weather stations;
and digital and conference phones. The website
also includes contact information for our customer
care department in case you need to reach us, as
well as frequently asked questions and customer
downloads.
We hope you will find all the information you need
on our website, however if you'd like to contact
the Oregon Scientific Customer Care department
directly, please visit www2.oregonscientific.com/
service/support or call 949-608-2848 in the US.
For international enquiries, please visit www2.
oregonscientific.com/about/international/default.
asp.
FCC STATEMENT
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful
interference, and (2) This device must accept any
interference received, including interference that
may cause undesired operation.
WARNING: Changes or modifications to this unit
not expressly approved by the party responsible
for compliance could void the user’s authority to
operate the equipment.
NOTE: This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable
instructions, may cause harmful interference
to radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause harmful interference to
radio or television reception, which can be
determined by turning the equipment off and on,
the user is encouraged to try to correct the
interference by one or more of the following
measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a
circuit different from that to which the receiver
•
Consult the dealer or an experienced radio / TV
technician for help.
is connected.
DECLARATION OF CONFORMITY
The following information is not to be used as
contact for support or sales. Please call our
customer service number (listed on our website at
www.oregonscientific.com, or on the warranty card
for this product) for all inquiries instead.
Name:
Oregon Scientific, Inc.
Address:
19861 SW 95th Place,
Tualatin, Oregon 97062
USA
Tel No.:
1-800-853-8883
Fax No.:
1-503-684-8883
Declares that the product:
Product No.
- 1 handset
- 1 base unit
protection against harmful interference in a
residential installation.
This equipment generates, uses and can
radiate radio frequency energy and, if not
installed and used in accordance with the
22
: WW338
- 1 sensor
Product No.
: WW338-H
- 2 handsets
Consumer Information:
This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the
bottom of this equipment is a label that contains, among other information, a product identifier in the format US:
KT5W400BWW338. If requested, this number must be provided to the telephone company.
An applicable certification jacks Universal Service Order Codes (USOC) for the equipment is provided (i.e.,
RJ11C) in the packaging with each piece of approved terminal equipment.
A plug and jack used to connect this equipment to the premises wiring and telephone network must comply
with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant telephone cord and
modular plug is provided with this product. It is designed to be connected to a compatible modular jack that is
also compliant. See installation instructions for details.
The REN is used to determine the number of devices that may be connected to a telephone line. Excessive
RENs on a telephone line may result in the devices not ringing in response to an incoming call. In most but not
all areas, the sum of RENs should not exceed five (5.0). To be certain of the number of devices that may be
connected to a line, as determined by the total RENs, contact the local telephone company. [For products
approved after July 23, 2001, the REN for this product is part of the product identifier that has the format US:
KT5W400BWW338. The digits represented by 0.0B are the REN without a decimal point (e.g., 03 is a REN of
0.3). For earlier products, the REN is separately shown on the label.]
If this equipment WW338 causes harm to the telephone network, the telephone company will notify you in
advance that temporary discontinuance of service may be required. But if advance notice isn’t practical, the
telephone company will notify the customer as soon as possible. Also, you will be advised of your right to file a
complaint with the FCC if you believe it is necessary.
The telephone company may make changes in its facilities, equipment, operations or procedures that could
affect the operation of the equipment. If this happens the telephone company will provide advance notice in
order for you to make necessary modifications to maintain uninterrupted service.
Please follow instructions for repairing if any (e.g. battery replacement section); otherwise do not alternate or
repair any parts of device except specified.
Connection to party line service is subject to state tariffs. Contact the state public utility commission, public
service commission or corporation commission for information.
NOTICE: If your home has specially wired alarm equipment connected to the telephone line, ensure the
installation of this [equipment ID] does not disable your alarm equipment. If you have questions about what will
disable alarm equipment, consult your telephone company or a qualified installer.
This equipment is hearing aid compatible.
NOTICE: According to telephone company reports, AC electrical surges, typically resulting from lightning
strikes, are very destructive to telephone equipment connected to AC power sources. To minimize damage
from these types of surges, a surge arrestor is recommended.
CAUTION: To maintain compliance with the FCC's RF exposure guidelines place the base unit at least 20cm
from nearby persons.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Create Date                     : 2004:08:02 11:35:03Z
Modify Date                     : 2004:08:05 14:55:04+08:00
Page Count                      : 2
Creation Date                   : 2004:08:02 11:35:03Z
Mod Date                        : 2004:08:05 14:55:04+08:00
Producer                        : Acrobat Distiller 5.0 (Windows)
Author                          : POLLY
Metadata Date                   : 2004:08:05 14:55:04+08:00
Creator                         : POLLY
Title                           : manual-E1.p65
Has XFA                         : No

EXIF Metadata provided by EXIF.tools