Integrated Display Technology WW338 2.4GHz FHSS Cordless Phone w/ CID User Manual manual E1 p65

Download:
Mirror Download [FCC.gov]
Document ID	461358
Application ID	b1NgNdMSxg6hW5g63fpr1A==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	160.74kB (2009226 bits)
Date Submitted	2004-08-19 00:00:00
Date Available	2004-08-19 00:00:00
Creation Date	2004-08-02 11:35:03
Producing Software	Acrobat Distiller 5.0 (Windows)
Document Lastmod	2004-08-17 10:47:11
Document Title	manual-E1.p65
Document Creator	PageMaker 6.5C
Document Author:	POLLY

EN
Model: WW338
User Manual
Manual del Usuario
Manual do Usuário
Manuel de L’utilisateur
EN
Redialing a Call ...................................... 8
MODEL: WW338
Deleting a Redial Number ...................... 8
USER MANUAL
TABLE OF CONTENTS
Redial from the Last 10 Numbers ........... 8
Fast Redial ............................................... 8
Saving Dialed Numbers into Memory .... 8
Phonebook .................................................. 8
Storing Numbers in Phonebook .............. 8
Important Safety Instruction ...................... 1
Keys to Use ............................................... 9
Safety Tips ................................................... 2
Deleting Numbers from Phonebook ....... 9
Introduction ................................................. 3
Editing Numbers in the Phonebook ....... 9
Key Features ............................................... 3
Calling Numbers from Phonebook ........ 10
Handset and Base Unit – Front View ...... 4
Quick Browsing of Phonebook .............. 10
Base Unit – Bottom View ........................ 4
Caller ID Display ....................................... 10
Handset – Front View .............................. 4
Viewing Caller ID Records .................... 10
Charger – Front View ............................... 5
Saving Caller ID Records in Phonebook .. 10
Getting Started ............................................ 6
Formatting Caller ID Numbers .............. 10
Connecting the AC Adaptor .................... 6
Deleting Caller ID Records .................... 10
Connecting to Phone Line ...................... 6
No Caller ID ............................................ 11
Installing the Handset Batteries .............. 6
Missed Calls ........................................... 11
Installing the Base Unit Batteries ........... 6
During a Call .............................................. 11
Charging the Handset Batteries .............. 6
Using the Mute Function ....................... 11
Final Safety Tips ..................................... 7
Using Speakerphone During a Call ...... 11
Electrical Safety ...................................... 7
Handset Settings ...................................... 11
Basic Functions .......................................... 7
Setting the Ring Tone ........................... 11
Making a Call ........................................... 7
Setting the Ring Tone Volume ............. 11
Answering a Call ...................................... 7
Setting the Display language ............... 11
Ending a Call ........................................... 7
Setting the Dial Mode ........................... 12
Call waiting .............................................. 8
Setting the Time / Date Format ........... 12
Message Waiting ..................................... 8
Setting the Area Code .......................... 12
Adjusting the Speaker Volume ............... 8
EN
2.4GHz Digital Expandable
Cordless Phone with
Integrated Weather Station
EN
Conference Call ........................................ 12
Playing the Game ................................. 18
Weather Forcasting .................................. 12
Resetting Your System ............................. 18
Weather Forecasting on the Handset ... 12
Setting Your Default Settings ............... 18
Temperature on the Handset ................ 13
Your Default Settings ............................. 18
Changing from Celsius to Fahrenheit ... 13
Keypad Symbols .................................... 19
Operating the Remote Sensor ................. 13
Safety & Care ............................................ 19
Installing Batteries ................................. 13
Safety Precautions ................................. 19
Low Battery Warning ............................. 14
Caring for the Product ........................... 19
Setting a Channel in Remote Sensor .. 14
Caution ................................................... 19
Table Stand or Wall Mount ................... 14
Troubleshooting ......................................... 20
The Reset Button ................................... 14
Potential Issues ...................................... 20
Operating the Base Unit ........................... 14
Problems with Multi-Handset Use ......... 21
Paging the Handsets ............................. 15
Other Important Items ............................ 21
Settings the Base Unit Time ................. 15
Specifications ........................................... 21
Setting the Time Format ....................... 15
About Oregon Scientific ........................... 22
Setting the Date Format ........................ 15
FCC Statement .......................................... 22
Setting the Date .................................... 15
Declaration of Conformity ........................ 22
Selecting Celsius or Fahrenheit ........... 15
Copyright .................................................... 23
Setting the Base Unit Alarm ................. 16
Turning the Alarm Off ........................... 16
Installing the Sensor .............................. 16
Using Multiple Handsets .......................... 16
Intercom Calling Between Handsets .... 17
Answering Intercom Calls ...................... 17
Call Waiting ........................................... 17
Call Transfer Between Handsets ........... 17
Registering Handsets to Base Unit ........ 17
Registration Procedure .......................... 17
De-Registration of Handsets .................. 17
Playing the Game (Snake) ....................... 18
Some of the following information may not apply
to your particular product; however, when using
conference phone equipment, basic safety
precautions should always be followed to reduce
the risk of fire, electric shock and injury to
persons, including the following:
1. Read and understand all instructions.
2. Follow all warnings and instructions marked on
the product.
3. Unplug this product from the wall outlet before
cleaning. Do not use liquid cleaners or aerosol
cleaners. Use a damp cloth for cleaning.
4. This product should not be used while you are
in a bathtub, shower or pool. Immersion of the
product in water could cause an electrical
shock.
5. Slots and openings in the cabinet back or bottom are provided for ventilation, to protect it
from overheating. These openings must not be
blocked or covered. The openings should
never be blocked by placing the product on
the bed, sofa, rug, or other similar surface.
This product should not be placed in a built-in
installation unless proper ventilation is
provided.
6. This product should be operated only from the
type of power source indicated on the marking
label. If you are not sure of the type of power
supply to your home, consult your dealer or
local power company.
7. Do not allow anything to rest on the power
cord. Do not locate this product where the cord
will be abused by persons walking on it.
8. Do not overload wall outlets and extension
cords as this can result in the risk of fire or
electric shock.
9. Never push objects of any kind into this product through cabinet slots as they may touch
dangerous voltage points or short out parts
EN
IMPORTANT SAFETY
INSTRUCTIONS
that could result in a risk of fire or electric
shock. Never spill liquid of any kind on the
product.
10.To reduce the risk of electric shock, do not
disassemble this product, but take it to a
qualified serviceman when service or repair
work is required. Opening or removing covers
may expose you to dangerous voltages or
other risks. Incorrect reassembly can cause
electric shock when the telephone equipment
is subsequently used.
11. Do not expose the product to extreme temperatures such as areas near a hot radiator or
stove or in a hot car.
12. Do not place lighted candles, cigarettes, cigars,
etc., on the telephone.
13. Never touch uninsulated telephone wires or
terminals unless the telephone line has been
disconnected at the network interface.
14. Never install or modify telephone wiring during
a lightning storm.
15. Never install telephone jacks in wet locations
unless the jack is specifically designed
for wet locations.
16. Use caution when installing or modifying telephone lines to prevent electrical shock and/or
fire.
17. Unplug this product from the wall outlet and
refer servicing to qualified service personnel
under the following conditions:
A. When the power supply cord or plug is
damaged or frayed.
B. If the product has been exposed to rain or
water.
C. If the product does not operate normally by
following the operating instructions.
D. If the product’s cabinet has been damaged.
EN
E. If the product exhibits a distinct change in
performance.
•
Do not scratch the LCD display.
•
Do not make any changes or modifications to
18. Avoid using a telephone (other than a cordless
type) during an electrical storm. There may be
a remote risk of electric shock from lightning.
19. Do not use the telephone to report a gas leak
in the vicinity of the leak.
this product. Unauthorized changes may void
your right to use this product.
•
The technical specifications for this product
and the contents of the user guide are subject
to change without notice.l
20. Do not place this product on an unstable cart,
stand or table.
The product may fall, causing serious damage
to the product.
21. Plug the adaptor to the socket-outlet which
near the equipment and shall be easily
CAUTION
To reduce the risk of fire, use only
No. 26 AWG or larger
telecommunication line cord.
accessible.
22.
Risk of explosion if battery is replace
by an incorrect type, use only SANIK, 3SNAAA75H-S-JIF. Dispose of used batteries
according to the instructions.
23. For servicing or replacement, you can purchase a suitable headset through service
center or retailer shop.
(see in www. oregonscientic.com)
SAFETY TIPS
This product is designed to give you years of
service if handled properly. Observe the following
guidelines:
•
Clean the unit with a damp cloth and mild
detergent. Avoid dropping the unit or placing it
in a high-traffic location.
•
Never immerse the unit in water. This can
cause electrical shock and damage the unit.
•
Do not subject the Base Unit to extreme
force, shock, or fluctuations in humidity.
•
Do not tamper with the internal components.
•
Do not mix new and old batteries or batteries
of different types.
•
Remove the batteries if storing this product
for a long period of time.
CAUTION
You must use a Class 2 power
source that supplies 9V DC and
delivers at least 400mA. Its plug
must fit the phone’s DC IN 9V jack.
The supplied adapter meets these specifications. Using an adapter that does not meet
these specifications could damage the phone
or the adapter.
Always connect the AC adapter to the phone
before you connect it to AC power. When you
finish, disconnect the adapter from AC power
before you disconnect from the phone.
SAVE THESE INSTRUCTIONS
WW338H:
•
2 handsets
•
1 base unit
•
1 charger
product of choice. The Base Unit of the WW338
has a built-in thermometer and clock station that
•
AC / DC adaptor for the Base Unit
•
Telephone line for the Base Unit
is capable of keeping track of minimum and
maximum temperatures in different locations via
•
Remote thermo-hygro sensor
•
Handset batteries
Thank you for selecting the Oregon Scientific™
WW338 2.4GHz Digital Expandable Cordless
Phone with Integrated Weather Station as your
transmissions from the remote sensor.
KEY FEATURES
This powerful device bundles animated weather
forecasting, indoor / outdoor wireless temperature
and humidity readings, time / date keeping, and
dual alarm features into a single tool that you can
•
Sensor wall-mount bracket
•
Belt clip
•
Sensor batteries
•
User manual
The WW338 Digital Phone Features:
•
Handset speakerphone
use from the convenience of your home.
•
The following items should be included in this
package:
Intercom/Call Transfer/Conference call
capability
•
Weather forecasting
•
Dual-crescendo alarms
•
High/low temperature/hygrometer alarm
•
Dual alarm with snooze function
•
Up to 3 remote thermo-hygro sensors
•
Full-dot graphic handset display
•
40-Caller ID memory
•
User-selectable Celsius or Fahrenheit
•
Built-in game on handset
•
10 ringer melodies and 4 standard ring tones
•
Mute/Flash/Redial functionality
•
Multiple language display – English, French,
•
Caller ID display
•
Headset jack & belt clip
WW338
•
1 handset
•
1 base unit
•
AC / DC adaptor for the Base Unit
•
Telephone line for the Base Unit
•
Remote thermo-hygro sensor
•
Handset battery pack
•
Sensor wall-mount bracket
•
Belt clip
•
Sensor batteries
•
User manual
EN
INTRODUCTION
Spanish and Portuguese
•
Sensor wall-mount bracket
•
Phonebook review during conversation
•
Redial feature for last 10 numbers
NOTE: Keep this manual handy as you use your
new product. It contains practical step-by-step
instructions, as well as technical specifications
and warnings you should know.
EN
HANDSET AND BASE UNIT
– FRONT VIEW
HANDSET - FRONT VIEW
10
11
10
11
1. Handset
7. CHANNEL
2. LED Charge Indicator
3. UNANSWERED CALL /
button
8. ALARM button
IN USE Indicator
4. PAGE Button
9. SET button
10. DOWN button
3. LCD Display
5. SNOOZE / LIGHT
button
11. UP button
5. Keypad
12
13
14
15
16
1. Receiver
2. Belt Clip
4. Headphone jack
• Keypad 0-9, A-Z buttons.
6. Base Unit LCD
• Press the number to dial the call or use for
text input i.e. editing the phonebook or
caller identification.
BASE UNIT - BOTTOM VIEW
6. MUTE / FORMAT button
• Press this to mute the microphone during a
call.
• Press to select the format you want to use
for a phone number i.e. no area code, with
area code, with area and international code.
7. REDIAL / DELETE button
• Press to browse redial list.
1. Power jack
2. Telephone line jack
5. ON / OFF ALARM
button
3. Battery box
6. RESET hole
4. Speaker outlet
7. UP button
8. HI/LO button
• Press to redial a phone number.
• Press to delete digits when dialing a phone
number.
8. PHONEBOOK (PHBK) button
• Press to view the phonebook.
CHARGER - FRONT VIEW
EN
9. TALK / CALLBACK button
• Press to begin and end a phone call.
• Press to callback a number.
10. MENU / FLASH button
• Press to access main menu.
• Press to confirm a selected option.
• Press to move from a current call, to call
waiting.
11. ARROW KEYS
• Press to move up and down menu options.
• Press to increase or decrease the speaker
volume.
• Press to browse Caller ID records,
phonebook and redial list.
12. EXIT / * button
• Press to exit an operation and return to
standby mode.
1. Handset
• Press to use * in text.
3. Charge LED
2. AC / DC power
13. CONF / # button
• Press to make a conference call.
• Press to use # in text.
14. SPEAKERPHONE (SPK) button
• Press to turn the speakerphone on or off.
15. INTERCOM (INT) button
• Press to make an intercom call.
• Press to make a conference call.
• Press to transfer a call.
16. Microphone
INSTALLING THE BASE UNIT
BATTERIES
EN
GETTING STARTED
CONNECTING THE AC ADAPTOR
1. Connect the AC adaptor socket to the Base
Unit and to your room’s power socket.
Four batteries (AAA size) come with your Base
Unit.
Insert the four batteries as indicated, matching
correct polarity (+, -)
2. Rest the handset on the Base Unit to charge.
Once plugged in, allow the handset to charge
NOTE: Reversing the orientation may damage the
Base Unit.
for 15 hours before using.
CHARGING THE HANDSET
BATTERIES
CONNECTING TO PHONE LINE
Connect the phone line to the Base Unit and to
your room’s telephone socket.
Before using the handset, charge the handset for
at least 15 hours.
Whenever you see the battery icon on the handset display become nearly empty, or hear the
warning tone during the call, please:
INSTALLING THE HANDSET
BATTERIES
•
End the call as soon as possible.
•
Don’t use the speakerphone mode for conservation since this will further reduce the take
time.
•
Put the handset back on the charger for
charging until the battery icon returns to high
level.
Batteries come with your phone. One is already
installed in one handset, while the other needs to
be installed in the second handset.
To charge the handset, place the handset in the
charger. The base charge light will come on to
Fitting the batteries in the handset
indicate the charging of handset. Always put the
handset in the base cradle with the keypad facing
1. Insert the battery into the handset by inserting
the piece at the end of the wire into the top
left of the battery indention on the handset.
2. Fit the battery compartment cover by sliding it
down so that it clicks firmly into place.
outwards.
NOTE: Please note the following:
•
Standby time: 5 days
•
Talk time: 7 hours
•
Handset charging time: 15 hours
•
Normal conditions of use: 0°C to 45°C
•
AC adaptor for base unit: 120VAC 9V 60Hz
400mA
battery icon will show the battery full in the top
right on the LCD display.
•
Avoid interference such as TV or other
EN
When the battery is fully charged, the handset
electrical appliances.
NOTE: In this user manual, all BOLDED,
capitalized letters are buttons that appear in your
new weather phone.
MAKING A CALL
FINAL SAFETY TIPS
Due to radio interference in the environment,
occasional loss of synchronization between the
Using the TALK button:
1. Press TALK to get the dial tone, and dial the
number. If you make a mistake, press TALK
again to cancel the whole number.
handset and base may occur for a very short
duration. The base will very quickly change to
another channel automatically to overcome the
interference and restore synchronization.
ELECTRICAL SAFETY
•
Do not install the base unit near a sink, bath
or shower, or anywhere else where it could get
OR
2. Dial the number then press TALK.
NOTE: You can use the TALK button to toggle
between Talk Mode and Standby Mode.
Using the Speakerphone (SPK) button:
1. Press SPK to get the dial tone, and dial the
number.
wet. Electrical equipment can cause serious
injury if used while you are wet or standing in
•
OR
water.
2. Dial the number then press SPK.
If the base unit ever falls into water, do not
NOTE: If you are in Speakerphone Mode and you
retrieve it until you have unplugged the power
lead from the mains and the telephone line
want to use the handset, press TALK to switch off
the speakerphone first.
plug from the telephone socket; then pull it out
by the unplugged cables.
•
Never use your weather phone in the open air
during a thunderstorm - unplug the Base Unit
from the telephone line and the main socket
when there are storms in your area. Damage
caused to your phone by lightning is not
covered by the guarantee.
ANSWERING A CALL
The handset will ring when there is an external call.
•
the speakerphone function).
NOTE: If the handset is placed in the recharge
cradle of the Base Unit when it is in Talk Mode, it
will automatically enter the Standby Mode.
BASIC FUNCTIONS
Usually, a loss of reception means you are too
far from the Base Unit, or there is interference
Press TALK OR press SPK. (This will enable
ENDING A CALL
•
Press TALK.
between the two units. Make sure to:
•
Stay within a range of 300 meters from the
Base Unit while using the handset.
EN
CALL WAITING
DELETING A REDIAL NUMBER
You will hear a call waiting tone:
1. Press REDIAL to see your last call record.
•
2. Use the ARROW KEYS to select a number,
Press FLASH to switch from an existing call to
call waiting.
MESSAGE WAITING
•
“Message Waiting” will appear on the screen.
Follow the voice message commands to enter
your phone network operator’s message
then press MENU.
3. Select “Delete Record”.
4. Press MENU.
5. Select “Yes” and then press MENU to confirm.
SAVING DIALED NUMBERS INTO
MEMORY
service.
ADJUSTING THE SPEAKER VOLUME
To adjust the speaker volume:
The handset will automatically save the last 10
numbers you dialed. To save dialed numbers into
•
Press TALK, then press the ARROW KEYS to
your Phonebook:
adjust the speaker volume accordingly.
1. Press REDIAL. (The last number is listed).
REDIALING A CALL
•
Press TALK, then press REDIAL.
REDIAL FROM THE LAST 10 NUMBERS
2. Use the ARROW KEYS to select a phone
number, then press MENU.
3. Select ‘Save Phonebook” to save number,
then press MENU. “SAVED” will appear on the
screen to confirm the action.
1. Press REDIAL to see your last call record.
PHONEBOOK
2. Use the ARROW KEYS to select a number.
3. Press TALK to dial the number.
•
The phone can store 50 phone numbers in the
If you want to edit the phone number before
redialing:
•
The name of the phone number can be stored
with a maximum of 15 characters.
1. Press REDIAL, then press MENU.
2. Use ARROW KEYS to select “Edit for Call”,
then press MENU.
3. Use the 0-9 buttons to edit the number.
4. Press TALK to dial the number.
phonebook of up to 24 digits.
STORING NUMBERS IN THE
PHONEBOOK
1. Press PHBK.
2. Press MENU.
FAST REDIAL
When you make a call and hear the busy tone,
press REDIAL. The phone will quickly redial the
number within 3 seconds.
3. Use the ARROW KEYS to select “Add
Record”, then press MENU.
4. The handset display shows “”
and “”.
5. Enter the name (see key guide below) and
then press MENU.
6. Enter the number and then press MENU to
confirm.
*
Press when editing
a name to return to
Standby Mode
Press when editing
a number to get “*”
Press to change
between capital and
small letter
Press to change
between capital and
small letter
record has been stored.
NOTE: If only a phone number and no name is
input, then the record can still be saved.
KEYS TO USE
When entering a name, “B” will be entered by
pressing the “2” button once, followed by pressing
“2” again within 1 second. If pressed beyond 1
second, “A” is entered and the second press of “2”
will give the entry of “AA”.
EN
7. The handset will beep twice indicating that the
NOTE: Use the # key to change from uppercase
to lowercase.
DELETING NUMBERS FROM
PHONEBOOK
To delete 1 record:
1. Press PHBK.
2. Use the ARROW KEYS to select the number
you want to remove, then press MENU.
3. Select “Delete Record” and then press
MENU.
4. When asked to confirm the deletion, select
“Yes”.
5. Press MENU to remove the number.
6. The handset will beep twice indicating that the
record has been deleted.
To delete all records:
1. Follow steps 1-3 above and select “Delete
The list of characters is shown below:
all?”
2. Now follow steps 4-6 above.
Capital Letter
Small Letter
SPACE 1 _ - + = ^
~.,;:?!
SPACE 1 _ - + = ^
~.,;:?!
ABC2ÄÆÅÀÁÂÃÇ
abc2äæåàáâãç
1. Press PHBK.
DEF3ÈÉÊËÐ
def3èéêëð
GHI4ÌÍÎÏ
ghi4ìíîï
2. Use the ARROW KEYS to select the number
you want to edit, then press MENU.
JKL5
jkl5
3. Select “Edit Record” and then press MENU.
MNO6ÖØÒÓÔÕÑ
mno6öøòóôõñ
PQRS7
pqrs7
TUV8ÙÚÛÜ
tuv8ùúûü
WXYZ9ÝÞ
wxyz9ýþ
0*#$&%/\|()
[]<>
0*#$&%/\|()
[]<>
EDITING NUMBERS IN THE
PHONEBOOK
4. Edit the name if needed, then press MENU.
5. Edit the phone number if needed, then press
MENU.
6. You will hear the double beep from the handset
indicating that the task is complete.
EN
CALLLING NUMBERS FROM
PHONEBOOK
1. Press PHBK whilst on an active call.
2. Use the ARROW KEYS to select a number,
then press MENU to dial the number.
QUICK BROWSING OF PHONEBOOK
1. Press PHBK.
2. Use the ARROW KEYS to select a phonebook
entry, OR press the key with the 1st letter of
the person’s name you are looking for. E.g.
Press key 7, 4 times to get quick access to a
name beginning with ‘S’
3. Press TALK to dial.
NOTE: You can use the Phonebook function whilst
on an active call.
CALLER ID DISPLAY
If you have subscribed to this service from your
phone network operator, the caller’s phone number
will be shown on the handset display when there is
an incoming call. The phone can store the caller
ID’s of up to 40 different call numbers.
NOTE: If the caller’s phone number was stored in
the phonebook, the associated name will be
displayed with the phone number.
Each entry in the caller list has:
2. If you need to edit the phone number before
making the call press MENU, then use the
ARROW KEYS to select “Edit for Call.”
3. Use the 0-9 buttons to edit the number.
4. Press TALK to dial the number.
NOTE: If “NO CALLS”, appears on the screen
then no records are stored in the Caller ID
memory.
SAVING CALLER ID RECORD IN
PHONEBOOK
When you have a Caller ID record on your
screen:
1. Press MENU, then use the ARROW KEYS to
select “Save Phonebook”.
2. Press MENU. “SAVED” will appear on the
screen to confirm the action.
NOTE: When the Caller ID memory is full, it will
automatically delete your 1st Caller ID record.
FORMATTING CALLER ID NUMBERS
1. Use the ARROW KEYS to select a phone
number in the Caller ID memory, then press
the FORMAT key.
2. The number you selected can now be formatted by pressing FORMAT to get the format
you prefer.
•
Caller number (up to 24 digits).
3. When the format is selected, press TALK to
dial the number.
•
The caller name (up to 15 characters) if this is
stored in the phonebook or supplied from the
phone network.
To delete 1 record:
•
The date and time of the call.
•
The number of calls made to this number (up
to 40).
DELETING CALLER ID RECORDS
1. Press the ARROW KEYS whilst in Standby
Mode and select the number you want to
delete. Then, press MENU.
2. Select “Delete Record”, then press MENU.
VIEWING CALLER ID RECORDS
1. When the phone is in Standby Mode use the
ARROW KEYS to browse through Caller ID
records.
10
3. Select “Yes” and then press MENU to confirm.
To delete all records:
1. Press the ARROW KEYS whilst in Standby
Mode. Then, press MENU.
2. Select “Delete All”, then press MENU.
NO CALLER ID
If a caller has withheld their Caller ID name and /
or number, one of the following messages will
HANDSET SETTINGS
IMPORTANT:
•
If you press the TALK button you will enter
Talk Mode.
•
If you press the MENU button you will enter
•
Menu Mode.
appear on your screen:
•
BLOCKED NUMBER
•
UNKNOWN NUMBER
You cannot enter the Menu Mode when the
phone is in Talk Mode. To exit the Talk Mode
•
BLOCKED NAME
press TALK.
•
UNKNOWN CALLER
•
BLOCKED CALL
•
UNKNOWN NAME
MISSED CALLS
If you miss a call, the handset will display this
symbol
When you view the Caller ID of your
missed calls the following notifications will appear
on the screen:
•
“NEW” – This is the first missed call from this
particular Caller ID.
•
“REPT” – This is not the first missed call from
this particular Caller ID.
DURING A CALL
USING THE MUTE FUNCTION
To mute the handset:
•
Press MUTE.
•
Press MUTE again to un-mute the handset and
return to the normal mode.
EN
3. Select “Yes” and then press MENU to confirm.
SETTING THE RING TONE
You have a choice of 10 melodies and 4 tones for
incoming calls. To select a ring tone:
1. Press MENU, then use the ARROW KEYS to
select “Handset Setting”.
2. Press MENU.
3. Select “Ringtone”, then press MENU.
4. Select the melody or tone you prefer, then
press MENU to confirm.
NOTE: If the ring volume is turned off, you will
not hear the ring melody while adjusting the ring
“ icon.
tone and LCD will display “
SETTING THE RING TONE VOLUME
1. Press MENU, then use the ARROW KEYS to
select “Ringer Volume”.
2. Press MENU.
3. Use the ARROW KEYS to increase or
decrease the volume.
4. Press MENU to confirm.
NOTE: If the phone is muted, you cannot dial any
digits until the mute button is released.
USING SPEAKERPHONE DURING A
CALL
During a conversation:
•
Press SPK to turn the speakerphone on.
•
Press TALK again to turn the speakerphone
off.
SETTING THE DISPLAY LANGUAGE
To change language:
1. Press MENU, use the ARROW KEYS to select
“Handset Setting”, then press MENU.
2. Select “Language”, the press MENU.
3. Select the language you want, then press
MENU to confirm.
11
EN
NOTE: The default language for the handset
display is English. You can also change the
language to French, Spanish and Portuguese.
SETTING THE DIAL MODE
In order to provide compatibility with other phone
systems, your phone can be set to either Pulse
dialing (same as rotary dial phones), or Tone
dialing (DTMF).
To set the Dial Mode:
1. Press MENU, then use the ARROW KEYS to
select “Handset Setting”.
2. Press MENU.
3. Select “Dialing”, then press MENU.
4. Select either “Tone” or “Pulse” mode, then
press MENU to confirm.
SETTING THE TIME / DATE FORMAT
1. Press MENU, then use ARROW KEYS to
select “Handset setting”.
2. Press MENU.
3. Select “Time & Date”, then press MENU.
4. Select either “Time Format” or “Date
Format”, then press MENU.
5. Then select your chosen format and press
MENU.
SETTING THE AREA CODE
CONFERENCE CALL
You can have a conference conversation with an
external call party and 2 internal calling parties.
1. First establish the call with the external party
by either making an external call or answering
an incoming call.
2. Press INT to make an intercom call to another
handset. The external party will be on hold.
3. The internal party answers your intercom call
by pressing TALK.
4. Then you press CONF and hold for about 2
seconds (you will hear a confirmation key
tone).
5. Then the external party, the other internal
party and you can talk together.
OR
A second internal party can join in on a call
between an internal and external party by simply
pressing TALK.
NOTE: You cannot have an intercom conversation
between a handset and the Base Unit.
WEATHER FORECASTING
WEATHER FORECASTING ON THE
HANDSET
The weather forecast display is the first LCD
display on the Base Unit. The outdoor temperature
1. Press MENU, then use the ARROW KEYS to
select “Handset Setting”.
is shown on the second line of the LCD display. It
has an icon on the left to represent the tempera-
2. Press MENU.
ture recorded by the external sensor on channel 1,
as well as the humidity shown on the right of the
3. Select “Area Code”, then press MENU.
4. Enter your 3-digit area code, then press MENU
to confirm.
icon.
To display the weather forecasting symbols on the
handset:
1. Press MENU.
2. Use the arrow keys to select “Weather”, then
press MENU.
12
then press MENU.
4. After the double beeps confirming selection,
press the EXIT key.
You should now be in stand-by mode showing one
of the five forecasting symbols. These include:
Partially cloudy
Cloudy
Rainy
TEMPERATURE ON THE HANDSET
The handset can display the temperature Information for both the built-in and external sensors. To
view the temperature readings on the handset
display:
1. Press MENU.
2. Use the ARROW KEYS to select “Weather”,
then press MENU.
3. Use the ARROW KEYS to select
“Temperature”, then press MENU.
Snowing
Sunny
4. After the double beeps confirming selection,
press the EXIT key.
The display will toggle between the date, time and
internal/external temperature with relative
IMPORTANT:
•
The accuracy of weather forecasting when
using pressure trend alone is about 70 to 75
percent and, therefore, the manufacturers and
suppliers cannot be held responsible for any
inconvenience caused by an inaccurate
weather forecast.
•
The weather forecast symbols may not reflect
current weather condition. The symbols are
forecasting the future.
•
A “sunny” forecast covering the nighttime
reflects fine, clear weather.
To remove the weather forecasting symbols on
the handset:
humidity.
NOTE: If multiple sensors are installed to gather
temperature and humidity readings from other
areas, the phone will cycle through these readings
as well.
CHANGING FROM CELSIUS TO
FAHRENHEIT
1. Press the MENU button, then use the ARROW
KEYS to select “Handset setting”.
2. Press the MENU button.
3. Select “Temp Format”, then press MENU.
4. Select either “Fahrenheit” or “Celsius”, then
press MENU to confirm.
1. Press MENU.
OPERATING THE REMOTE SENSOR
2. Use the ARROW KEYS to select “Weather”,
then press MENU.
INSTALLING BATTERIES
3. Use the ARROW KEYS to select “Off”, then
press MENU.
4. After the double beeps confirming selection,
press the EXIT key.
To begin using the remote sensor:
1. You must first install two triple “A” (AAA)
batteries by taking a Philips screwdriver and
removing the four screws in the back bracket.
2. Insert batteries into the back.
13
EN
3. Use the ARROW KEYS to select “Forecast”,
EN
3. Before screwing the back bracket on to the
remote sensor, you need to reset the sensor
by pressing the reset hole with a blunt stylus,
such as an “unfolded” paper clip.
If no signals are received, blanks “__ • __ °C__%“ will
be displayed and the kinetic wave icon will show.
NOTE: Once a channel is assigned to a remote
unit, you can only change it by replacing the
batteries or resetting the unit.
TABLE STAND OR WALL MOUNT
The remote sensor has a retractable table stand,
which when flipped open can support the unit on a
NOTE: Beside the RESET button on the back of
the remote sensor, there is a switch to select the
channel of the remote sensor.
flat surface. Or you can flip close the stand and
mount the unit on a wall using the recessed screw
hole.
4. Take the four bolts and screw them back in to
replace the back bracket.
NOTE: Make sure the thin black rubber lining
around the circumference of the batteries lines up
with the crease in the back bracket so water does
not seep in to the sensor if wet.
LOW BATTERY WARNING
When it is time to replace the batteries, the lowbattery indicator will show up when the respective
THE RESET BUTTON
This button is only used when the unit is operating
in an unfavorable way or malfunctioning. Insert a
pointed object such as an unfolded paper clip into
the reset hole, then press and hold. All settings
will return to their default values.
channel is selected. The battery level of the main
unit will be shown on the indoor temperature
display when it is running low.
SETTING A CHANNEL IN REMOTE
SENSOR
The individual channel temperatures will be
OPERATING THE BASE UNIT
displayed on the 2nd line and the indoor temperature on the 3rd line. The Base Unit will automati-
The Weather Base Unit displays the weather fore-
cally update its readings at about 30-second
intervals.
cast as well as the outdoor and indoor temperature and relative humidity. You may also set
1. Take a Philips screwdriver and remove the
four screws in the back bracket.
the alarm to activate, indicating when a certain
temperature or humidity has been reached.
2. Move the black switch to 1, 2 or 3.
NOTE: On the top line in the Base Unit, the radio
signal should show the signal emitting a radio fre-
3. Take the four bolts and screw them back in to
replace the back bracket.
14
quency to the remote sensor.
This feature is very useful if you can’t remember
where you put your handset. Make the lost handset ring for a fixed time of 2 minutes by pressing
PAGE in the cradle on the Base Unit.
NOTE: You cannot have an intercom conversation
between a handset and the Base Unit.
•
To look for all handsets, press the PAGE
button in the cradle of the Base Unit.
•
To stop the paging, select any key on the
handset or press the PAGE button again.
SETTING THE BASE UNIT TIME
1. Press the ALARM button 2 or 3 times to set it
at the month-and-day screen.
2. Press and hold down the SET button for 2 or
more seconds. You should now see “24hr/12hr”
flashing on the bottom left of the screen.
3. Press the SET button again to change the
flashing image to the time.
4. Use the ARROW KEYS to change the time
5. Once the time is set, press the SET button
five more times to escape the set-up mode.
NOTE: Updating the date and time on the Base
Unit will synchronize all other handsets.
SETTING THE TIME FORMAT
1. Press the ALARM button 2 or 3 times to set it
at the month-and-day screen.
2. Press and hold down the SET button for 2 or
more seconds. You should now see “24hr/12hr”
flashing on the bottom left of the screen.
3. Use the ARROW KEYS to change the time
format.
NOTE: By entering this mode, you can also
4. When set, then press the SET to escape setup mode.
NOTE: By pressing and holding down the UP or
DOWN buttons, you can increase or decrease the
settings at a much faster rate.
SETTING THE DATE FORMAT
1. Press the ALARM button 2 or 3 times to set it
at the month-and-day screen.
2. Press and hold down the SET button for 2 or
more seconds. You should now see “24hr/12hr”
flashing on the bottom left of the screen.
3. Press the SET button twice more to change
the flashing image to the date in the lower right
of the screen.
4. Use the ARROW KEYS to change the date
format.
5. Once the time is set, then press the SET
to escape set-up mode.
SETTING THE DATE
1. Press the ALARM button 2 or 3 times to set it
at the month-and-day screen.
2. Press and hold down the SET button for 2 or
more seconds. You should now see “24hr/12hr”
flashing on the bottom left of the screen.
3. Press the SET button 3 more times to change
the flashing image to the date in the lower right
of the screen.
4. Use the ARROW KEYS to change the date,
then press the SET to escape set-up mode.
NOTE: The latest setting on any handset will
supercede the previous setting on other handsets
and Base Unit.
SELECTING CESIUS OR FAHRENHEIT
change time display, M/D vs. D/M, date and
month and Fahrenheit and Celsius (see below for
1. Press the ALARM button 2 or 3 times to set it
more instruction).
2. Press and hold down the SET button for 2 or
at the month-and-day screen.
15
EN
PAGING THE HANDSETS
EN
more seconds. You should now see “24hr/12hr”
flashing on the bottom left of the screen.
3. Press the SET button 4 more times to change
the flashing image to a “C” in the lower right of
the screen.
4. Use the ARROW KEYS to select either Celsius or
Fahrenheit, then press the SET button.
SETTING THE BASE UNIT ALARM
There are two channels for the dual alarm
function. To choose one of the alarms:
1. Press the ALARM button on the Base Unit to
select alarm ((1)).
2. Press the ALARM button again to change it to
alarm ((2)), or press ALARM again to select
INSTALLING THE SENSOR
Mount the remote sensor on a flat surface using
the recess holes in the back of the unit. (You
need to slip on the white wall-mount bracket to get
a recess hole).
Additional sensors can be purchased to allow
reporting from up to 3 locations.
Place the remote sensor somewhere dry outside
so that you can read the temperature and humidity, as well as forecast the weather.
For best results:
•
•
Do not place the sensor in direct sunlight or
moisture.
Position the sensor so that it faces the indoor
Base Unit.
alarm ((1)).
3. Use the ARROW KEYS to set the time of the
alarm.
•
Minimize obstructions, such as doors, walls
4. When time is set, press the SET key to set
the alarm.
•
To maximize radio frequency reception for the
clock, place the remote unit in a location with a
NOTE: Your Base Unit has 2 daily crescendo
alarms. If both set, the alarms will sound daily at
the set time.
and furniture.
clear view to the sky. You may need to
experiment with various locations to find the
best reception.
NOTE: Please note that the remote sensor must
TURNING THE ALARM OFF
Once an alarm sounds, you have two options:
Option 1:
1. Press any key except the SNOOZE button to
turn the alarm off completely.
be placed within 300 meters of the Base Unit to
be fully functional.
USING MULTIPLE HANDSETS
Your base unit can synchronize with up to 2
Option 2:
handsets. If you have multiple handsets
registered with the base, 2 handsets can make
1. Press the SNOOZE button. (The alarm will
intercom calls.
return on after 8 minutes).
This sensor works as a radio-frequency clock
transmitter for the Base Unit. This remote sensor
is used to transmit radio frequency signals for the
radio-controlled clock, and to measure the
temperature and humidity.
INTERCOM CALLING BETWEEN
HANDSETS
1. Press INT on your handset.
2. Type in the number of the handset (1-4) that
you want to reach.
3. The paged handset will ring. The display of the
16
ANSWERING INTERCOM CALLS
1. Press TALK to answer an intercom call.
2. Press TALK to end the intercom call.
be in full working order out of the box.
EN
paged handset will show “INT CALL”.
NOTE: To cancel the intercom call, press TALK.
When you purchase an additional handset, you
have to register it to the Base Unit in order to
make and answer calls.
You can register up to 3 more handsets to make
and answer calls via the same Base Unit.
Handsets are numbered 1 to 4.
CALL WAITING
REGISTRATION PROCEDURE
If an external call comes in during an intercom
conversation, you will hear a call waiting tone.
To register a new handset:
1. To end an intercom call, press TALK.
1. On the handset, press MENU.
2. The external line will ring. Press TALK again to
answer the external call.
2. Use the ARROW KEYS to select “Handset
Setting”, then press MENU.
3. Select “Registration”, then press MENU.
CALL TRANSFER BETWEEN HANDSETS
You can transfer an external call from one
handset to another.
1. During an external phone conversation, press
INT. Your caller will be put on hold.
2. Type in the handset number (1-4) to which you
want the call transferred.
3. The paged handset will ring and “INT CALL”
will appear on the display.
4. To answer the call on the paged handset, press
TALK.
5. Press TALK on the paging handset to complete
the operation.
NOTE: If the other handset does not answer,
press INT to end the intercom call and get back to
the external line. Pressing TALK will end both the
intercom call and the external call.
REGISTERING HANDSETS TO
BASE UNIT
4. Select “Yes” then press MENU. (You will see
the message: “Registering”).
5. Press and hold the PAGE button on the cradle
of the base unit.
NOTE: The Base Unit will then send a signal to the
handset registering the handset to the Base Unit.
Once the registration function has been
completed, the handset will return to Standby
Mode.
DE-REGISTRATION OF HANDSETS
To de-register handsets to the base unit:
1. On the handset, press MENU.
2. Use the ARROW KEYS to select “Handset
Setting,” then press MENU.
3. Select “Remove HS”, then press MENU.
4. Use the ARROW KEYS to select the handset
number, then press MENU.
5. Select “Yes,” then press MENU to confirm the
de-registration.
The handset and Base Unit shall be factory preregistered among each other with the identification
digital security codes, which are stored into the
non-volatile memory. Therefore, the unit should
17
EN
PLAYING THE GAME (SNAKE)
RESETTING YOUR SYSTEM
The Snake Game.
If you need to reset your system, you will lose
any information that you have stored and all
The objective of snake is to let it eat as many
settings will return to their default settings.
The weather phone handset contains one game:
gemstones as possible without ever hitting the
walls or itself.
SETTING YOUR DEFAULT SETTINGS
To reset your system to the default settings:
To play:
1. Press MENU.
1. Press MENU.
2. Use the ARROW KEYS to select “Game”,
then press MENU.
3. Select “Snake” and then press the MENU
button.
4. Use the ARROW KEYS to choose the level of
the game, with level 5 being the most difficult,
then press MENU.
NOTE: The game will commence as soon as you
press MENU.
PLAYING THE GAME
When the game starts, you will see a snake
moving along the screen. To win the game, you
2. Use the ARROW KEYS to select “Handset
Setting” , then press MENU.
3. Use the ARROW KEYS to select “Set
Default”, then press MENU.
4. When prompted, select “Yes”. You will then
hear the double beep to indicate the default
settings have been restored.
YOUR DEFAULT SETTINGS
Your default settings are:
Language:
English
INT melody:
Melody 1
Ring volume:
will have to direct the snake to the eggs without
hitting the wall or letting the snake hit itself.
Dial mode:
Tone
Ear volume:
Vol. 1
Using the keypad, press as follows to direct the
Phonebook:
Empty
snake:
CLID list:
Empty
BUTTON
ACTION
OFF
Area Code:
—-
Up
Right
Time format:
12Hr
Down
Date format:
MM / DD
Left
Temperature format:
Fahrenheit
Time:
12:00 AM
End game
NOTE: When the snake is moving, you only need
to turn the snake to the left or right. There is no
need to move the snake forward. If you move the
snake backwards, it will hit itself and the game will
18
Empty
Weather:
EXIT
be over.
Redial list:
Do not clean any part of your weather phone
Capital Letter
Small Letter
with benzene, thinner or other solvent chemicals - this may cause permanent damage that
SPACE 1 _ - + = ^
~.,;:?!
SPACE 1 _ - + = ^ ~
.,;:?!
is not covered by the guarantee. When necessary, clean it with a damp cloth.
ABC2ÄÆÅÀÁÂÃÇ
abc2äæåàáâãç
DEF3ÈÉÊËÐ
def3èéêëð
GHI4ÌÍÎÏ
ghi4ìíîï
JKL5
jkl5
MNO6ÖØÒÓÔÕÑ
mno6öøòóôõñ
PQRS7
pqrs7
TUV8ÙÚÛÜ
tuv8ùúûü
WXYZ9ÝÞ
wxyz9ýþ
0*#$&%/\|()
[]<>
0*#$&%/\|()
[]<>
Press when editing
a name to return to
Standby Mode
Press when editing
a number to get “*”
Press to change
between capital and
small letter
Press to change
between capital and
small letter
SAFTEY AND CARE
•
Keep your weather phone away from hot,
•
Every effort has been made to ensure the
humid conditions or strong sunlight.
highest standards of reliability for your
weather phone. However, if something does
go wrong, please do not try to repair it
yourself-consult your supplier.
•
rain, or handle it with wet hands – water can
damage electrical equipment.
CAUTION
•
To avoid risk of fire or injury, do not attempt
to charge non-rechargeable batteries.
•
Replace only batteries with the same or
equivalent type recommended by the
manufacturer.
•
Please dispose of old, defective batteries in
an environmentally friendly manner in
accordance with the relevant legislation.
SAFETY PRECAUTIONS
Please observe the following safety precautions
when setting up and using this product.
•
LCD panel – The LCD panel is made of glass,
•
Heat sources – Keep the product away from
heat sources, such as radiators, stoves,
•
Water and moisture – Do not use the product
Do not use your weather phone outdoors in the
•
No naked flames, such as lighted candles,
should be placed near the apparatus.
and may break if the unit is dropped.
heaters, and other heat-generating products.
in or near water or in high moisture areas, such
as a bathroom.
CARING FOR THIS PRODUCT
To ensure you receive the maximum benefit from
using this product, please observe the following
guidelines.
19
EN
•
KEYPAD SYMBOLS
EN
TROUBLESHOOTING
•
If this doesn’t work, try a different position for
the Base Unit. Make sure it is not near any
electrical equipment, such as another phone,
TV, radio, washing machine, fridge, etc. If
possible, position the Base Unit higher up.
•
If any other handsets are registered to the
same Base Unit, make sure they are not
already on a call — you would see the EXT
symbol on your own handset.
•
You may need to change the dial type setting
to Pulse dialing if your local telephone exchange does not support Tone dialing.
If your weather phone is not working correctly,
check the points here before returning it for repair.
Whatever your problem, you should first check
that:
•
You have installed the Base Unit correctly,
and it is plugged into the telephone line and the
main power socket.
•
Main power is switched on at the socket.
•
You have installed the batteries into the handset.
NEVER attempt any repairs or adjustments
yourself - you could make the problem worse and
invalidate your guarantee.
POTENTIAL ISSUES
“My call was cut off when I went out of range
of the Base Unit. Now I cannot use my
handset.”
•
Please move the handset closer to the Base
Unit.
“I cannot make or answer calls.”
“I hear a tone while I am using my handset,
and the battery symbol on the display is
“empty”.
•
Try moving the handset closer to the Base
Unit.
•
•
If this doesn’t work, try a different position for
the Base Unit - perhaps higher up if possible.
•
The battery charge level may be low - place
the handset in the charging cradle of the Base
Unit to recharge the battery.
Problems with making and answering calls:
•
Switch off the power at the main socket, wait
a few seconds and then switch the power back
on, this may solve the problem.
“When I press the TALK button, I cannot make
a call.”
•
Please check if the line is already in use by
other handsets registered to the same Base
Unit. The EXT symbol on your handset would
indicate this.
“When I press keys on my handset, digits
appear on the display but I cannot make an
outside call.”
•
20
Try moving the handset closer to the Base
Unit.
The battery needs to be recharged. Put the
handset into the charger; it will take up to 15
hours to be fully charged.
“I’ve tried recharging the batteries, but I still
get a warning that it is not charged.”
•
The batteries probably need to be replaced.
“The handset does not ring when a call comes
in.”
•
Check that you have not set the ringing
volumes to “off” (see section Setting the
Ring Tone Volume).
“The Caller Display function is not working”
•
Please check if you have subscribed to the
Caller Display service with your network provider.
“The Caller Display function is working but
the Caller’s Name from the phonebook is not
displayed even if the same telephone number
calls in”
•
You need to store the full telephone number
including the STD code into your phonebook
memory.
button but I cannot make a call and the green
LED on the base is not on”
•
Unplug the power adapter at the bottom of the
Base Unit, then reconnect the power adapter.
Press and hold PAGE on the Base Unit until IN
USE (green LED) is flashing.
•
Repeat steps as outlined in the “Registering
Handsets to Base Unit” section.
SPECIFICATIONS
EN
“I have tried several times to press the TALK
Your phone operates on a 2.4GHz ISM digital
Worldwide Digital Cordless Telecommunication
(WDCT) platform technology. This product uses
75 regular channels plus 14 channels for
substitution when the environment is interfered.
Here are the specifications for your weather
phone:
TYPE
DESCRIPTION
Standard
Worldwide Digital
Cordless Telecommunication (WDCT)
Frequency range
2.4GHz ISM
Channel bandwidth
0.824MHz
Modulation
GFSK
Speech coding
Adaptive Differential
Pulse Code Modulation
(ADPCM)
Communication range
Up to 300 meters in
open space
Base power supply
Input 120V / 60Hz
Handset charger
power supply
Input 120V / 60Hz
Handset power supply
1 pack rechargeable
batteries, NiMH
750mAh
Handset battery
charging time
15 hours
WARNING
•
The contents of this manual and technical
specification are subject to change.
Operating time
•
Due to printing limitation, picture and display
showed in this manual may be slightly
different from real one.
Standby: approximately 5 days
Talk: approximately
7 hours
Operating temperature
0°C to 45°C
Storage temperature
(outdoor)
-20°C to 60°C
Storage temperature
(indoor)
-5°C to 50°C
Humidity range
25% to 90%
PROBLEMS WITH MULTI-HANDSET
USE
“I cannot make a call.”
•
Only one outside call and one intercom call
can take place at once. Make sure no other
handset user is already on a call.
•
Please check if another handset has engaged
the line already.
OTHER IMPORTANT ITEMS
Weight Dimension
Charger: 5.64 ounces (including adaptor)
Charger: 0.19 x 0.35 x 0.35 inches (without
adaptor)
Handset: 3.7 ounces (without battery)
Handset: 0.53 x 0.22 x 0.15 inches (H x W x D)
•
•
The contents of this manual may not be
reproduced without the permission of the
manufacturer.
In case a Ni-Cadmium rechargeable battery is
used, the draining of its contents should be d
done in accordance to the law re: special
waste material.
21
EN
ABOUT OREGON SCIENTIFIC
Visit our website (www.oregonscientific.com) to
learn more about Oregon Scientific products such
as digital cameras; MP3 players; children's
electronic learning products and games; projection
clocks; health and fitness gear; weather stations;
and digital and conference phones. The website
also includes contact information for our customer
care department in case you need to reach us, as
well as frequently asked questions and customer
downloads.
We hope you will find all the information you need
on our website, however if you'd like to contact
the Oregon Scientific Customer Care department
directly, please visit www2.oregonscientific.com/
service/support or call 949-608-2848 in the US.
For international enquiries, please visit www2.
oregonscientific.com/about/international/default.
asp.
FCC STATEMENT
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful
interference, and (2) This device must accept any
interference received, including interference that
may cause undesired operation.
WARNING: Changes or modifications to this unit
not expressly approved by the party responsible
for compliance could void the user’s authority to
operate the equipment.
NOTE: This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable
instructions, may cause harmful interference
to radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause harmful interference to
radio or television reception, which can be
determined by turning the equipment off and on,
the user is encouraged to try to correct the
interference by one or more of the following
measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a
circuit different from that to which the receiver
•
Consult the dealer or an experienced radio / TV
technician for help.
is connected.
DECLARATION OF CONFORMITY
The following information is not to be used as
contact for support or sales. Please call our
customer service number (listed on our website at
www.oregonscientific.com, or on the warranty card
for this product) for all inquiries instead.
Name:
Oregon Scientific, Inc.
Address:
19861 SW 95th Place,
Tualatin, Oregon 97062
USA
Tel No.:
1-800-853-8883
Fax No.:
1-503-684-8883
Declares that the product:
Product No.
- 1 handset
- 1 base unit
protection against harmful interference in a
residential installation.
This equipment generates, uses and can
radiate radio frequency energy and, if not
installed and used in accordance with the
22
: WW338
- 1 sensor
Product No.
: WW338-H
- 2 handsets
EN
- 1 base unit
- 1 charger
- 1 sensor
Product Name
: 2.4GHz Digital
Expandable Cordless
Phone with Integrated
Weather Station
Manufacturer
: IDT Technology Limited
Address
: Block C, 9/F, Kaiser
Estate, Phase 1,
41 Man Yue St.
Hung Hom, Kowloon
Hong Kong
The WW338HSC - one HS and charger only
is in conformity with Part 15 of the FCC Rules.
Operation is subject to the following two
conditions: 1) this device may not cause harmful
interference. 2) This device must accept any
interference received, including interference that
may cause undesired operation.
COPYRIGHT
© 2004 Oregon Scientific. All rights reserved.
23
Consumer Information:
This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the
bottom of this equipment is a label that contains, among other information, a product identifier in the format US:
KT5W400BWW338. If requested, this number must be provided to the telephone company.
An applicable certification jacks Universal Service Order Codes (USOC) for the equipment is provided (i.e.,
RJ11C) in the packaging with each piece of approved terminal equipment.
A plug and jack used to connect this equipment to the premises wiring and telephone network must comply
with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant telephone cord and
modular plug is provided with this product. It is designed to be connected to a compatible modular jack that is
also compliant. See installation instructions for details.
The REN is used to determine the number of devices that may be connected to a telephone line. Excessive
RENs on a telephone line may result in the devices not ringing in response to an incoming call. In most but not
all areas, the sum of RENs should not exceed five (5.0). To be certain of the number of devices that may be
connected to a line, as determined by the total RENs, contact the local telephone company. [For products
approved after July 23, 2001, the REN for this product is part of the product identifier that has the format US:
KT5W400BWW338. The digits represented by 0.0B are the REN without a decimal point (e.g., 03 is a REN of
0.3). For earlier products, the REN is separately shown on the label.]
If this equipment WW338 causes harm to the telephone network, the telephone company will notify you in
advance that temporary discontinuance of service may be required. But if advance notice isn’t practical, the
telephone company will notify the customer as soon as possible. Also, you will be advised of your right to file a
complaint with the FCC if you believe it is necessary.
The telephone company may make changes in its facilities, equipment, operations or procedures that could
affect the operation of the equipment. If this happens the telephone company will provide advance notice in
order for you to make necessary modifications to maintain uninterrupted service.
Please follow instructions for repairing if any (e.g. battery replacement section); otherwise do not alternate or
repair any parts of device except specified.
Connection to party line service is subject to state tariffs. Contact the state public utility commission, public
service commission or corporation commission for information.
NOTICE: If your home has specially wired alarm equipment connected to the telephone line, ensure the
installation of this [equipment ID] does not disable your alarm equipment. If you have questions about what will
disable alarm equipment, consult your telephone company or a qualified installer.
This equipment is hearing aid compatible.
NOTICE: According to telephone company reports, AC electrical surges, typically resulting from lightning
strikes, are very destructive to telephone equipment connected to AC power sources. To minimize damage
from these types of surges, a surge arrestor is recommended.
CAUTION: To maintain compliance with the FCC's RF exposure guidelines place the base unit at least 20cm
from nearby persons.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Create Date                     : 2004:08:02 11:35:03Z
Modify Date                     : 2004:08:17 10:47:11+08:00
Page Count                      : 28
Creation Date                   : 2004:08:02 11:35:03Z
Mod Date                        : 2004:08:17 10:47:11+08:00
Producer                        : Acrobat Distiller 5.0 (Windows)
Author                          : POLLY
Metadata Date                   : 2004:08:17 10:47:11+08:00
Creator                         : POLLY
Title                           : manual-E1.p65
Has XFA                         : No

EXIF Metadata provided by EXIF.tools