Intermec Technologies 802CF13E EasyLAN User Manual 040804I1 User Info

Intermec Technologies Corporation EasyLAN 040804I1 User Info

Users Manual

Intermec Technologies Corporation  REPORT NO: 040804-1 EMC Test Laboratory  DATE: Aug. 4, 2004 DOC. NO.: 577-501-204  Page 1 of 4 EasyLAN Wireless, CF Radio, FCC 15.247, Canada RSS-210, RSS-102  FCC ID: HN2-802CF13E APPENDIX I, User Information     Technologies Corporation EMC Test Laboratory Cedar Rapids, IA MEASUREMENT/TECHNICAL REPORT  Intermec Technologies Corporation EasyLAN® Wireless CF Radio   2.4 GHz  Spread Spectrum Transmitter  REPORT NO: 040804-1  DATE: Aug. 8, 2004  Appendix I   USER INFORMATION  Page 2  3400E Regulatory Compliance Information Insert   Page 3  4420 Regulatory Compliance Information Insert  Page 4  4440 Regulatory Compliance Information Insert
578-100-XXX   Revision A    Page 1 of  1  *578-100-XXXA*   578-100-XXXA Compliance Statement Insert  Device Name:  EasyCoder® Bar Code Label Printer  Model Number:  3400E  The responsible party for the compliance of this device is:  Intermec Technologies Corporation  6001 36th Avenue West   Everett, WA  98203  USA  (425) 348-2600   This product conforms to the following approvals.   The user(s) of this product are cautioned to use accessories and peripherals approved by Intermec Technologies Corporation.  The use of accessories other than those recommended, or changes to this product that are not approved by Intermec Technologies Corporation, may void the compliance of this product and may result in the loss of the user’s authority to operate the equipment.  FCC Digital Emissions Compliance     Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.  These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.  This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.  Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.  CISPR Class A Statement    Warning  This is a Class A product.  In a domestic environment this product may cause radio interference in which case the user may be    required to take adequate measures.  NOTE:  This device has been tested to the applicable European Norm as a radio frequency transmitter; letters of intent to market this product, as required under R&TTE Directive 1999/5/EC have been submitted.   This device may contain the EasyLAN® Wireless CF Radio approved by the Federal Communications Commission under  FCC ID:  HN2-802CF13E and Industry Canada IC: 1223A-802CF13E  WARNING:  Per the FCC and IC radio frequency (RF) exposure requirements,  (1) Antennas must be supplied and installed as recommended by Intermec Technologies Corporation to insure compliance to RF exposure requirements.  The antennas approved for use are Intermec part numbers 072833-002, 063363-002 or 067262-001.  Correct antenna mounting is fully described within the Intermec 3400E Quick Start Guide. (2) When installing and using Intermec approved remote antennas associated the EasyLAN® Wireless CF Radio, a 20-cm (8-inch) passing distance must be maintained from any body part of the user or nearby persons and the remote antenna.  The antenna must not be touched during transmitter operation. (3) Cables attached to the remote antennas must have a minimum length as provided from Intermec to insure the proper losses to control RF exposure. (4) RF safety requirements mandate this device cannot be co-located with other transmitters.
578-100-XXX   Revision A    Page 1 of  1 *578-100-XXXA*   578-100-XXXA Compliance Statement Insert  Device Name:  EasyCoder® Bar Code Label Printer  Model Number:  4420  The responsible party for the compliance of this device is:  Intermec Technologies Corporation  6001 36th Avenue West   Everett, WA  98203  USA  (425) 348-2600   This product conforms to the following approvals.   The user(s) of this product are cautioned to use accessories and peripherals approved by Intermec Technologies Corporation.  The use of accessories other than those recommended, or changes to this product that are not approved by Intermec Technologies Corporation, may void the compliance of this product and may result in the loss of the user’s authority to operate the equipment.  FCC Digital Emissions Compliance     Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.  These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.  This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.  Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.  CISPR Class A Statement    Warning  This is a Class A product.  In a domestic environment this product may cause radio interference in which case the user may be    required to take adequate measures.  NOTE:  This device has been tested to the applicable European Norm as a radio frequency transmitter; letters of intent to market this product, as required under R&TTE Directive 1999/5/EC have been submitted.   This device may contain the EasyLAN® Wireless CF Radio approved by the Federal Communications Commission under  FCC ID:  HN2-802CF13E and Industry Canada IC: 1223A-802CF13E  WARNING:  Per the FCC and IC radio frequency (RF) exposure requirements,  (1) Antennas must be supplied and installed as recommended by Intermec Technologies Corporation to insure compliance to RF exposure requirements.  The antennas approved for use are Intermec part numbers 072833-002, 063363-002 or 067262-001.  Correct antenna mounting is fully described within the Intermec 4400 Quick Start Guide. (2) When installing and using Intermec approved remote antennas associated the EasyLAN® Wireless CF Radio, a 20-cm (8-inch) passing distance must be maintained from any body part of the user or nearby persons and the remote antenna.  The antenna must not be touched during transmitter operation. (3) Cables attached to the remote antennas must have a minimum length as provided from Intermec to insure the proper losses to control RF exposure. (4) RF safety requirements mandate this device cannot be co-located with other transmitters.
578-100-XXX   Revision A    Page 1 of  1 *578-100-XXXA*   578-100-XXXA Compliance Statement Insert  Device Name:  EasyCoder® Bar Code Label Printer  Model Number:  4440  The responsible party for the compliance of this device is:  Intermec Technologies Corporation  6001 36th Avenue West   Everett, WA  98203  USA  (425) 348-2600   This product conforms to the following approvals.   The user(s) of this product are cautioned to use accessories and peripherals approved by Intermec Technologies Corporation.  The use of accessories other than those recommended, or changes to this product that are not approved by Intermec Technologies Corporation, may void the compliance of this product and may result in the loss of the user’s authority to operate the equipment.  FCC Digital Emissions Compliance     Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.  These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.  This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.  Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.  CISPR Class A Statement    Warning  This is a Class A product.  In a domestic environment this product may cause radio interference in which case the user may be    required to take adequate measures.  NOTE:  This device has been tested to the applicable European Norm as a radio frequency transmitter; letters of intent to market this product, as required under R&TTE Directive 1999/5/EC have been submitted.   This device may contain the EasyLAN® Wireless CF Radio approved by the Federal Communications Commission under  FCC ID:  HN2-802CF13E and Industry Canada IC: 1223A-802CF13E  WARNING:  Per the FCC and IC radio frequency (RF) exposure requirements,  (1) Antennas must be supplied and installed as recommended by Intermec Technologies Corporation to insure compliance to RF exposure requirements.  The antennas approved for use are Intermec part numbers 072833-002, 063363-002 or 067262-001.  Correct antenna mounting is fully described within the Intermec 4400 Quick Start Guide. (2) When installing and using Intermec approved remote antennas associated the EasyLAN® Wireless CF Radio, a 20-cm (8-inch) passing distance must be maintained from any body part of the user or nearby persons and the remote antenna.  The antenna must not be touched during transmitter operation. (3) Cables attached to the remote antennas must have a minimum length as provided from Intermec to insure the proper losses to control RF exposure. (4) RF safety requirements mandate this device cannot be co-located with other transmitters.

Navigation menu