Intermec Technologies 802CF13E EasyLAN User Manual 040804I1 User Info
Intermec Technologies Corporation EasyLAN 040804I1 User Info
Users Manual
Intermec Technologies Corporation REPORT NO: 040804-1
EMC Test Laboratory DATE: Aug. 4, 2004
DOC. NO.: 577-501-204 Page 1 of 4
EasyLAN Wireless, CF Radio, FCC 15.247, Canada RSS-210, RSS-102 FCC ID: HN2-802CF13E
APPENDIX I, User Information
Technologies Corporation
EMC Test Laboratory
Cedar Rapids, IA
MEASUREMENT/TECHNICAL REPORT
Intermec Technologies Corporation
EasyLAN® Wireless CF Radio
2.4 GHz Spread Spectrum Transmitter
REPORT NO: 040804-1
DATE: Aug. 8, 2004
Appendix I
USER INFORMATION
Page 2 3400E Regulatory Compliance Information Insert
Page 3 4420 Regulatory Compliance Information Insert
Page 4 4440 Regulatory Compliance Information Insert
578-100-XXX Revision A Page 1 of 1
*578-100-XXXA*
578-100-XXXA
Compliance Statement Insert
Device Name: EasyCoder® Bar Code Label Printer Model Number: 3400E
The responsible party for the compliance of this device is: Intermec Technologies Corporation
6001 36th Avenue West
Everett, WA 98203 USA
(425) 348-2600
This product conforms to the following approvals. The user(s) of this product are cautioned to use accessories and peripherals approved by
Intermec Technologies Corporation. The use of accessories other than those recommended, or changes to this product that are not approved by
Intermec Technologies Corporation, may void the compliance of this product and may result in the loss of the user’s authority to operate the
equipment.
FCC Digital Emissions Compliance
Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the
interference at his own expense.
CISPR Class A Statement
Warning
This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be
required to take adequate measures.
NOTE: This device has been tested to the applicable European Norm as a radio frequency transmitter; letters of intent to market this product, as required under R&TTE
Directive 1999/5/EC have been submitted.
This device may contain the EasyLAN® Wireless CF Radio approved by the Federal Communications Commission under
FCC ID: HN2-802CF13E and Industry Canada IC: 1223A-802CF13E
WARNING: Per the FCC and IC radio frequency (RF) exposure requirements,
(1) Antennas must be supplied and installed as recommended by Intermec Technologies Corporation to insure compliance to RF exposure
requirements. The antennas approved for use are Intermec part numbers 072833-002, 063363-002 or 067262-001. Correct antenna
mounting is fully described within the Intermec 3400E Quick Start Guide.
(2) When installing and using Intermec approved remote antennas associated the EasyLAN® Wireless CF Radio, a 20-cm (8-inch) passing
distance must be maintained from any body part of the user or nearby persons and the remote antenna. The antenna must not be touched
during transmitter operation.
(3) Cables attached to the remote antennas must have a minimum length as provided from Intermec to insure the proper losses to control RF
exposure.
(4) RF safety requirements mandate this device cannot be co-located with other transmitters.
578-100-XXX Revision A Page 1 of 1
*578-100-XXXA*
578-100-XXXA
Compliance Statement Insert
Device Name: EasyCoder® Bar Code Label Printer Model Number: 4420
The responsible party for the compliance of this device is: Intermec Technologies Corporation
6001 36th Avenue West
Everett, WA 98203 USA
(425) 348-2600
This product conforms to the following approvals. The user(s) of this product are cautioned to use accessories and peripherals approved by
Intermec Technologies Corporation. The use of accessories other than those recommended, or changes to this product that are not approved by
Intermec Technologies Corporation, may void the compliance of this product and may result in the loss of the user’s authority to operate the
equipment.
FCC Digital Emissions Compliance
Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the
interference at his own expense.
CISPR Class A Statement
Warning
This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be
required to take adequate measures.
NOTE: This device has been tested to the applicable European Norm as a radio frequency transmitter; letters of intent to market this product, as required under R&TTE
Directive 1999/5/EC have been submitted.
This device may contain the EasyLAN® Wireless CF Radio approved by the Federal Communications Commission under
FCC ID: HN2-802CF13E and Industry Canada IC: 1223A-802CF13E
WARNING: Per the FCC and IC radio frequency (RF) exposure requirements,
(1) Antennas must be supplied and installed as recommended by Intermec Technologies Corporation to insure compliance to RF exposure
requirements. The antennas approved for use are Intermec part numbers 072833-002, 063363-002 or 067262-001. Correct antenna
mounting is fully described within the Intermec 4400 Quick Start Guide.
(2) When installing and using Intermec approved remote antennas associated the EasyLAN® Wireless CF Radio, a 20-cm (8-inch) passing
distance must be maintained from any body part of the user or nearby persons and the remote antenna. The antenna must not be touched
during transmitter operation.
(3) Cables attached to the remote antennas must have a minimum length as provided from Intermec to insure the proper losses to control RF
exposure.
(4) RF safety requirements mandate this device cannot be co-located with other transmitters.
578-100-XXX Revision A Page 1 of 1
*578-100-XXXA*
578-100-XXXA
Compliance Statement Insert
Device Name: EasyCoder® Bar Code Label Printer Model Number: 4440
The responsible party for the compliance of this device is: Intermec Technologies Corporation
6001 36th Avenue West
Everett, WA 98203 USA
(425) 348-2600
This product conforms to the following approvals. The user(s) of this product are cautioned to use accessories and peripherals approved by
Intermec Technologies Corporation. The use of accessories other than those recommended, or changes to this product that are not approved by
Intermec Technologies Corporation, may void the compliance of this product and may result in the loss of the user’s authority to operate the
equipment.
FCC Digital Emissions Compliance
Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the
interference at his own expense.
CISPR Class A Statement
Warning
This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be
required to take adequate measures.
NOTE: This device has been tested to the applicable European Norm as a radio frequency transmitter; letters of intent to market this product, as required under R&TTE
Directive 1999/5/EC have been submitted.
This device may contain the EasyLAN® Wireless CF Radio approved by the Federal Communications Commission under
FCC ID: HN2-802CF13E and Industry Canada IC: 1223A-802CF13E
WARNING: Per the FCC and IC radio frequency (RF) exposure requirements,
(1) Antennas must be supplied and installed as recommended by Intermec Technologies Corporation to insure compliance to RF exposure
requirements. The antennas approved for use are Intermec part numbers 072833-002, 063363-002 or 067262-001. Correct antenna
mounting is fully described within the Intermec 4400 Quick Start Guide.
(2) When installing and using Intermec approved remote antennas associated the EasyLAN® Wireless CF Radio, a 20-cm (8-inch) passing
distance must be maintained from any body part of the user or nearby persons and the remote antenna. The antenna must not be touched
during transmitter operation.
(3) Cables attached to the remote antennas must have a minimum length as provided from Intermec to insure the proper losses to control RF
exposure.
(4) RF safety requirements mandate this device cannot be co-located with other transmitters.