Intermec Technologies 802CF13E EasyLAN User Manual 040804I1 User Info
Intermec Technologies Corporation EasyLAN 040804I1 User Info
Users Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 486614 |
| Application ID | dHxDUtWqy51gBlxnR2QVQw== |
| Document Description | Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 3.94kB (49262 bits) |
| Date Submitted | 2004-11-08 00:00:00 |
| Date Available | 2004-11-08 00:00:00 |
| Creation Date | 2004-10-28 15:00:54 |
| Producing Software | Acrobat Distiller 6.0.1 (Windows) |
| Document Lastmod | 2004-10-28 15:03:18 |
| Document Title | Microsoft Word - 040804I1 User Info.doc |
| Document Creator | PScript5.dll Version 5.2 |
| Document Author: | FryDave |
Intermec Technologies Corporation EMC Test Laboratory DOC. NO.: 577-501-204 EasyLAN Wireless, CF Radio, FCC 15.247, Canada RSS-210, RSS-102 APPENDIX I, User Information REPORT NO: 040804-1 DATE: Aug. 4, 2004 Page 1 of 4 FCC ID: HN2-802CF13E MEASUREMENT/TECHNICAL REPORT Technologies Corporation EMC Test Laboratory Cedar Rapids, IA Intermec Technologies Corporation EasyLAN® Wireless CF Radio 2.4 GHz Spread Spectrum Transmitter REPORT NO: 040804-1 DATE: Aug. 8, 2004 Appendix I USER INFORMATION Page 2 3400E Regulatory Compliance Information Insert Page 3 4420 Regulatory Compliance Information Insert Page 4 4440 Regulatory Compliance Information Insert Compliance Statement Insert Device Name: EasyCoder® Bar Code Label Printer Model Number: 3400E The responsible party for the compliance of this device is: Intermec Technologies Corporation 6001 36th Avenue West Everett, WA 98203 USA (425) 348-2600 This product conforms to the following approvals. The user(s) of this product are cautioned to use accessories and peripherals approved by Intermec Technologies Corporation. The use of accessories other than those recommended, or changes to this product that are not approved by Intermec Technologies Corporation, may void the compliance of this product and may result in the loss of the user’s authority to operate the equipment. FCC Digital Emissions Compliance Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. CISPR Class A Statement Warning This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. NOTE: This device has been tested to the applicable European Norm as a radio frequency transmitter; letters of intent to market this product, as required under R&TTE Directive 1999/5/EC have been submitted. This device may contain the EasyLAN® Wireless CF Radio approved by the Federal Communications Commission under FCC ID: HN2-802CF13E and Industry Canada IC: 1223A-802CF13E WARNING: Per the FCC and IC radio frequency (RF) exposure requirements, (1) Antennas must be supplied and installed as recommended by Intermec Technologies Corporation to insure compliance to RF exposure requirements. The antennas approved for use are Intermec part numbers 072833-002, 063363-002 or 067262-001. Correct antenna mounting is fully described within the Intermec 3400E Quick Start Guide. (2) When installing and using Intermec approved remote antennas associated the EasyLAN® Wireless CF Radio, a 20-cm (8-inch) passing distance must be maintained from any body part of the user or nearby persons and the remote antenna. The antenna must not be touched during transmitter operation. (3) Cables attached to the remote antennas must have a minimum length as provided from Intermec to insure the proper losses to control RF exposure. (4) RF safety requirements mandate this device cannot be co-located with other transmitters. 578-100-XXX Revision A *578-100-XXXA* 578-100-XXXA Page 1 of 1 Compliance Statement Insert Device Name: EasyCoder® Bar Code Label Printer Model Number: 4420 The responsible party for the compliance of this device is: Intermec Technologies Corporation 6001 36th Avenue West Everett, WA 98203 USA (425) 348-2600 This product conforms to the following approvals. The user(s) of this product are cautioned to use accessories and peripherals approved by Intermec Technologies Corporation. The use of accessories other than those recommended, or changes to this product that are not approved by Intermec Technologies Corporation, may void the compliance of this product and may result in the loss of the user’s authority to operate the equipment. FCC Digital Emissions Compliance Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. CISPR Class A Statement Warning This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. NOTE: This device has been tested to the applicable European Norm as a radio frequency transmitter; letters of intent to market this product, as required under R&TTE Directive 1999/5/EC have been submitted. This device may contain the EasyLAN® Wireless CF Radio approved by the Federal Communications Commission under FCC ID: HN2-802CF13E and Industry Canada IC: 1223A-802CF13E WARNING: Per the FCC and IC radio frequency (RF) exposure requirements, (1) Antennas must be supplied and installed as recommended by Intermec Technologies Corporation to insure compliance to RF exposure requirements. The antennas approved for use are Intermec part numbers 072833-002, 063363-002 or 067262-001. Correct antenna mounting is fully described within the Intermec 4400 Quick Start Guide. (2) When installing and using Intermec approved remote antennas associated the EasyLAN® Wireless CF Radio, a 20-cm (8-inch) passing distance must be maintained from any body part of the user or nearby persons and the remote antenna. The antenna must not be touched during transmitter operation. (3) Cables attached to the remote antennas must have a minimum length as provided from Intermec to insure the proper losses to control RF exposure. (4) RF safety requirements mandate this device cannot be co-located with other transmitters. 578-100-XXX Revision A *578-100-XXXA* 578-100-XXXA Page 1 of 1 Compliance Statement Insert Device Name: EasyCoder® Bar Code Label Printer Model Number: 4440 The responsible party for the compliance of this device is: Intermec Technologies Corporation 6001 36th Avenue West Everett, WA 98203 USA (425) 348-2600 This product conforms to the following approvals. The user(s) of this product are cautioned to use accessories and peripherals approved by Intermec Technologies Corporation. The use of accessories other than those recommended, or changes to this product that are not approved by Intermec Technologies Corporation, may void the compliance of this product and may result in the loss of the user’s authority to operate the equipment. FCC Digital Emissions Compliance Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. CISPR Class A Statement Warning This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. NOTE: This device has been tested to the applicable European Norm as a radio frequency transmitter; letters of intent to market this product, as required under R&TTE Directive 1999/5/EC have been submitted. This device may contain the EasyLAN® Wireless CF Radio approved by the Federal Communications Commission under FCC ID: HN2-802CF13E and Industry Canada IC: 1223A-802CF13E WARNING: Per the FCC and IC radio frequency (RF) exposure requirements, (1) Antennas must be supplied and installed as recommended by Intermec Technologies Corporation to insure compliance to RF exposure requirements. The antennas approved for use are Intermec part numbers 072833-002, 063363-002 or 067262-001. Correct antenna mounting is fully described within the Intermec 4400 Quick Start Guide. (2) When installing and using Intermec approved remote antennas associated the EasyLAN® Wireless CF Radio, a 20-cm (8-inch) passing distance must be maintained from any body part of the user or nearby persons and the remote antenna. The antenna must not be touched during transmitter operation. (3) Cables attached to the remote antennas must have a minimum length as provided from Intermec to insure the proper losses to control RF exposure. (4) RF safety requirements mandate this device cannot be co-located with other transmitters. 578-100-XXX Revision A *578-100-XXXA* 578-100-XXXA Page 1 of 1
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Page Count : 4 Has XFA : No XMP Toolkit : XMP toolkit 2.9.1-14, framework 1.6 About : uuid:b3aea6c9-f9a7-461f-a2c9-05bd7cd90652 Producer : Acrobat Distiller 6.0.1 (Windows) Creator Tool : PScript5.dll Version 5.2 Modify Date : 2004:10:28 15:03:18-05:00 Create Date : 2004:10:28 15:00:54-05:00 Metadata Date : 2004:10:28 15:03:18-05:00 Document ID : uuid:b2ae4b1f-8aed-40e2-a963-77e5c35c9e3a Format : application/pdf Title : Microsoft Word - 040804I1 User Info.doc Creator : FryDave Author : FryDaveEXIF Metadata provided by EXIF.tools