Intermec Technologies NOVCDPD Mobile Computer with WAN CDPD radio User Manual 020117A1

Intermec Technologies Corporation Mobile Computer with WAN CDPD radio 020117A1

UserManual.wiki >

Intermec Technologies >

NOVCDPD User Manual >

20020117 app A user manual

Contents

1. App F User Info Declaration and Warnings
2. Novatel User Manual
3. 20020117 app A user manual

20020117 app A user manual

Intermec Technologies Corporation FCC ID: EHANOVCDPDEMC Test Lab REPORT NO: 20020117-1DOC. NO.: 577-501-008 Page 1 of 18700 CDPD, FCC 2.1053 Radiated Spurious Emissions, Appendix ATechnologies CorporationEMC Test LaboratoryCedar Rapids, IAMEASUREMENT/TECHNICAL REPORTIntermec Technologies Corporation700 With Novatel CDPDCellular Radio ModuleREPORT NO: 20020117-1DATE: January 17, 2002APPENDIX ANOVATEL USERS MANUAL

NOVATEL WIRELESS TECHNOLOGIES LTD. Calgary, Alberta TITLE: Hardware Interface Specification for Expedite Wireless IP Modem DOCUMENT NO.: OM-01016529 SHEET: 1 of 17 REV: 3.0 EXPEDITE WIRELESS IP MODEM HARDWARE INTERFACE SPECIFICATION OM - 01016529 Revision 3

NOVATEL WIRELESS TECHNOLOGIES LTD. Calgary, Alberta TITLE: Hardware Interface Specification for Expedite Wireless IP Modem DOCUMENT NO.: OM-01016529 SHEET: 2 of 17 REV: 3.0 REVISION HISTORY REV# ECO# EFF. DATE DESCRIPTION PREPARED APPROVED 1 99007 Initial release. P. Faubert S. Smilar 2 99024 990709 Change order of pins 21 and 22 P. Faubert S. Smilar 3 99047 990809 Add mounting instructions K. Frayn S. Smilar

NOVATEL WIRELESS TECHNOLOGIES LTD. Calgary, Alberta TITLE: Hardware Interface Specification for Expedite Wireless IP Modem DOCUMENT NO.: OM-01016529 SHEET: 3 of 17 REV: 3.0 The information disclosed herein is the exclusive property of NOVATEL WIRELESS TECHNOLOGIES LTD. and is not to be disclosed without the written consent of NOVATEL WIRELESS TECHNOLOGIES LTD. No part of this publication may be reproduced or transmitted in any form or by any means including electronic storage, reproduction, execution or transmission without the prior written consent of NOVATEL WIRELESS TECHNOLOGIES LTD. The recipient of this document by its retention and use, agrees to respect the security status of the information contained herein. The information disclosed herein is the exclusive property of Novatel Wireless Technologies Ltd. and is not to be disclosed without the written consent of Novatel Wireless Technologies Ltd. No part of this publication may be reproduced or transmitted in any form or by any means including electronic storage, reproduction, execution or transmission without the prior written consent of Novatel Wireless Technologies Ltd. The recipient of this document by its retention and use, agrees to respect the security status of the information contained herein. This document is intended for limited circulation. The information contained in this document is subject to change without notice and should not be construed as a commitment by NOVATEL WIRELESS TECHNOLOGIES LTD. unless such commitment is expressly given in a covering document. © Copyright NOVATEL WIRELESS TECHNOLOGIES LTD. (1999)

NOVATEL WIRELESS TECHNOLOGIES LTD. Calgary, Alberta TITLE: Hardware Interface Specification for Expedite Wireless IP Modem DOCUMENT NO.: OM-01016529 SHEET: 4 of 17 REV: 3.0 Table of Contents 1 WARNING........................................................................................................................................6 2 INTRODUCTION..............................................................................................................................6 3 SCOPE.............................................................................................................................................6 4 SPECIFICATIONS ...........................................................................................................................6 4.1 Physical Interface ......................................................................................................................6 4.1.1 Data/Power Connection ......................................................................................................7 4.1.2 RF Antenna Connector Type...............................................................................................8 4.1.3 Pin Descriptions..................................................................................................................9 4.2 Host Interface Specifications ...................................................................................................10 4.2.1 Serial Data Rate and Format ............................................................................................10 4.3 Radio Specifications ................................................................................................................10 4.3.1 Airlink Data Rate...............................................................................................................10 4.3.2 Recommended Antenna Type...........................................................................................10 4.3.3 Frequency Range .............................................................................................................10 4.3.4 Duplex Mode ....................................................................................................................10 4.3.5 RF Power Class................................................................................................................10 4.4 Electrical Specifications...........................................................................................................11 4.5 Mechanical Specifications........................................................................................................12 4.5.1 Dimensions.......................................................................................................................12 4.5.2 Weight..............................................................................................................................12 4.6 Environmental Specifications...................................................................................................12 4.6.1 Temperature Range..........................................................................................................12 4.6.2 Humidity ...........................................................................................................................12 4.6.3 ...............................................................................................................................................12 4.6.4 Shock Stability..................................................................................................................13 4.6.5 Vibration Stability..............................................................................................................13 4.6.6 Regulatory compliance .....................................................................................................13 4.6.7 ESD Protection.................................................................................................................13 4.7 CDPD Part 409 Compliance ....................................................................................................14 5 INSTALLATION INSTRUCTIONS..................................................................................................15 5.1 Antenna Mounting....................................................................................................................15 5.2 Antenna...................................................................................................................................15 5.3 Labeling...................................................................................................................................15 5.4 User Manual ............................................................................................................................15 6 PACKAGING REQUIREMENTS ....................................................................................................17

NOVATEL WIRELESS TECHNOLOGIES LTD. Calgary, Alberta TITLE: Hardware Interface Specification for Expedite Wireless IP Modem DOCUMENT NO.: OM-01016529 SHEET: 5 of 17 REV: 3.0 6.1 Shipping Packaging.................................................................................................................17 6.2 Labeling...................................................................................................................................17

NOVATEL WIRELESS TECHNOLOGIES LTD. Calgary, Alberta TITLE: Hardware Interface Specification for Expedite Wireless IP Modem DOCUMENT NO.: OM-01016529 SHEET: 6 of 17 REV: 3.0 1 WARNING All persons must be at least 20 cm from the antenna when transmitter operating to meet FCC RF exposure requirements. Refer to the Installation Instructions section for specific requirements for the antenna used with module. 2 INTRODUCTION This document describes the hardware interface for the Novatel Wireless Expedite Wireless IP Modem. The Expedite Wireless IP Modem is an OEM module designed for integration into a host product to provide two-way wireless data communication capability via the CDPD (Cellular Digital Packet Data) Network. 3 SCOPE The scope of this document includes all pertinent information for describing the capabilities and operating requirements for the product in order to determine suitability for specific market applications. Internal design issues, detailed operating instructions and cost information is not included in this document. 4 SPECIFICATIONS 4.1 Physical Interface

NOVATEL WIRELESS TECHNOLOGIES LTD. Calgary, Alberta TITLE: Hardware Interface Specification for Expedite Wireless IP Modem DOCUMENT NO.: OM-01016529 SHEET: 9 of 17 REV: 3.0 4.1.3 Pin Descriptions Pin # Name Direction Power-on Reset State Description 13, 14 Vcc1 POWER POWER SUPPLY CONNECTION TO THE MODEM FOR ALL CIRCUITRY EXCEPT FOR THE RF POWER AMPLIFIER. 15, 16 Vcc2 POWER POWER SUPPLY CONNECTION TO THE MODEM FOR THE RF POWER AMPLIFIER ONLY 1,2 & 23,24 GND POWER MODEM GROUND 3 PWR_IND OUTPUT POWER INDICATOR: HI: INDICATES THAT THE MODEM IS ON LO INDICATES THAT THE MODEM IS OFF 5 SM_IND OUTPUT SLEEP MODE INDICATOR: HI: INDICATES THAT THE MODEM IS IN SLEEP MODE LO INDICATES THAT THE MODEM IS NOT IN SLEEP MODE 4 WKUP INPUT WAKE UP INPUT: (ACTIVE HI PULSE) A PULSE APPLIED TO THIS PIN WILL TURN ON THE MODEM IF THE MODEM IS OFF, OR WAKE UP THE MODEM IF THE MODEM IS IN SLEEP MODE. REFER TO THE APPLICATIONS INFORMATION SECTION FOR MORE DETAILS ON USING THE WAKE UP PIN. 6 DTM INPUT DATA TO MODEM: (3.3 VOLT LOGIC LEVEL) IN RS232 TERMS, THIS IS CALLED "TXD". 7 DFM OUTPUT DATA FROM MODEM: (3.3 VOLT LOGIC LEVEL) IN RS232 TERMS, THIS IS CALLED "RXD". 11 RTS INPUT READY TO SEND: (3.3 VOLT LOGIC LEVEL) 10 CTS OUTPUT CLEAR TO SEND: (3.3 VOLT LOGIC LEVEL) 8 DTR INPUT DTE READY: (3.3 VOLT LOGIC LEVEL) 9 DSR OUTPUT DCE READY: (3.3 VOLT LOGIC LEVEL) 12 GPIO1 BI-DIRECTIONAL INPUT WITH PULLUP GENERAL PURPOSE CONFIGURABLE INPUT OR OUTPUT: REFER TO THE AT COMMAND SET FOR THE DEFAULT STATE. 17 GPIO2 BI-DIRECTIONAL INPUT WITH PULLUP GENERAL PURPOSE CONFIGURABLE INPUT OR OUTPUT: REFER TO THE AT COMMAND SET FOR THE DEFAULT STATE. 18 GPIO3 BI-DIRECTIONAL INPUT WITH PULLDOWN GENERAL PURPOSE CONFIGURABLE INPUT OR OUTPUT: REFER TO THE AT COMMAND SET FOR THE DEFAULT STATE. 19 GPIO4 BI-DIRECTIONAL INPUT WITH PULLUP GENERAL PURPOSE CONFIGURABLE INPUT OR OUTPUT: REFER TO THE AT COMMAND SET FOR THE DEFAULT STATE. 20 GPIO5 BI-DIRECTIONAL INPUT WITH PULLDOWN GENERAL PURPOSE CONFIGURABLE INPUT OR OUTPUT: REFER TO THE AT COMMAND SET FOR THE DEFAULT STATE. 21 GPIO6 BI-DIRECTIONAL INPUT WITH PULLUP GENERAL PURPOSE CONFIGURABLE INPUT OR OUTPUT: REFER TO THE AT COMMAND SET FOR THE DEFAULT STATE. 22 ADC_IN ANALOG INPUT ADC INPUT ADC INPUT: THIS PIN IS CONNECTED TO ONE CHANNEL OF AN 8-BIT ADC. REFER TO THE AT COMMAND SET ON HOW TO READ THIS ADC VALUE.

NOVATEL WIRELESS TECHNOLOGIES LTD. Calgary, Alberta TITLE: Hardware Interface Specification for Expedite Wireless IP Modem DOCUMENT NO.: OM-01016529 SHEET: 10 of 17 REV: 3.0 4.2 Host Interface Specifications 4.2.1 Serial Data Rate and Format The Expedite supports asynchronous data transmission of the following rate and format: Baud Rate (bits/second) 1200, 2400, 4800, 9600, 19200, 38400 Data bits 7, 8 Parity Even, None, Odd Mark Stop Bits 1, 2 4.3 Radio Specifications 4.3.1 Airlink Data Rate Rate - 19200 bits per second Error correction - Reed Solomon (63,47) Transmission standard (CDPD System Specification Part 401, Section 4.5.) 4.3.2 Recommended Antenna Type Type - Half-Wave Dipole Impedance - 50 ohm nominal VSWR - 1.5:1 nominal, 2.0:1 maximum Note that the module is aligned assuming a 1.2 dB antenna gain (cable loss included in antenna gain). 4.3.3 Frequency Range Mode Frequency Range Transmit 824 MHz - 849 MHz Receive 869 MHz - 894 MHz 4.3.4 Duplex Mode Full-Duplex (CDPD System Specification Version 1.1 part 409, paragraph 4.2) 4.3.5 RF Power Class Class III (0.6 Watt ERP)

NOVATEL WIRELESS TECHNOLOGIES LTD. Calgary, Alberta TITLE: Hardware Interface Specification for Expedite Wireless IP Modem DOCUMENT NO.: OM-01016529 SHEET: 11 of 17 REV: 3.0 (CDPD System Specification Version 1.1 part 409, paragraph 4.3) 4.4 Electrical Specifications 4.4.1.1 Operating Characteristics (Ta = 0ºC to 60ºC, VCC1 & VCC2 = 3.6V, unless otherwise noted.) SYMBOL PARAMETER / CONDITIONS MIN TYPICAL MAX UNITS VCC1 MODEM SUPPLY VOLTAGE 3.45 3.6 4.5 V VCC2 RF POWER AMPLIFIER SUPPLY VOLTAGE 3.45 3.6 4.5 V MODEM OFF VCC1 = 3.6V 5 µA SLEEP MODE VCC1 = 3.6V 8 mA RECEIVE MODE VCC1 = 3.6V 130 mA ICC1 TRANSMIT MODE VCC1 = 3.6V 175 mA MODEM OFF VCC2 = 3.6V 5 µA SLEEP MODE VCC2 = 3.6V 5 µA RECEIVE MODE VCC2 = 3.6V 5 µA ICC2 TRANSMIT MODE VCC2 = 3.6V 50 725 mA TWAKEUP WAKE-UP PULSE WIDTH FROM SLEEPMODE FROM POWER UP 10 500 mSec VIL1(NOTE 1) INPUT VOLTAGE – LOW (EXCEPT FOR WKUP) MODEM ON MODEM OFF -0.5 0 0.8 0 V VIH1(NOTE 1) INPUT VOLTAGE - HIGH (EXCEPT FOR WKUP) MODEM ON MODEM OFF 2.0 3.3 3.7 0.0 V VIL2(NOTE 2) INPUT VOLTAGE - LOW (WKUP ONLY) WKUP ONLY -0.5 0 0.5 V VIH2(NOTE 2) INPUT VOLTAGE - HIGH (WKUP ONLY) 3.0 4.5 V VOL(NOTE 1) OUTPUT VOLTAGE - LOW (IOL = 1.0mA) 0.78 V VOH(NOTE 1) OUTPUT VOLTAGE - HIGH (IOH = -200µA) 2.6 3.3 3.4 V IOL(NOTE 1) MAXIMUM SINK CURRENT -1.0 mA IOH(NOTE 1) MAXIMUM SOURCE CURRENT 1.0 mA VADC ADC INPUT VOLTAGE ADC READABLE VOLTAGE RANGE ABSOLUTE MAXIMUM INPUT VOLTAGE 1.5 5.50 8.50 V RESADC ADC RESOLUTION 8 BITS 24 mV REFADC ADC REFERENCE VOLTAGE 2.048 V DIVADC ADC DIVIDER RATIO 1:3 ZADC ADC INPUT IMPEDANCE 300k OHMS NOTE 1 - The specifications apply to all pins on the serial interface connector except for the following pins: GND, VCC1, VCC2 & ADC_IN. All pins have except VCC1, VCC2 and GND are filtered via a 470pF shunt capacitor and a 330 ohm series resistor which affects the sink and source capability of the pin.

NOVATEL WIRELESS TECHNOLOGIES LTD. Calgary, Alberta TITLE: Hardware Interface Specification for Expedite Wireless IP Modem DOCUMENT NO.: OM-01016529 SHEET: 12 of 17 REV: 3.0 NOTE 2 - The WKUP pin is not connected directly to the CPU, it is connected though a resistor to the base of an NPN transistor. 4.5 Mechanical Specifications 4.5.1 Dimensions 5.00 mm x 54.00 mm x 72.91 mm 4.5.2 Weight Approximately: 27g 4.6 Environmental Specifications 4.6.1 Temperature Range The temperature is defined as per the CDPD System Specification Version 1.1 part 409, paragraph 5.2.1 Mode Lower Limit Upper Limit Operating (Compliant) 0 Degrees C +60 Degrees C Operating (De-rated) -20 Degrees C +60 Degrees C Storage -40 Degrees C +85 Degrees C 4.6.2 Humidity CDPD Part 409 paragraph 5.2.2 50 degrees C 40% RH 8 hours

NOVATEL WIRELESS TECHNOLOGIES LTD. Calgary, Alberta TITLE: Hardware Interface Specification for Expedite Wireless IP Modem DOCUMENT NO.: OM-01016529 SHEET: 13 of 17 REV: 3.0 4.6.3 Shock Stability CDPD Part 409 paragraph 5.2.3.1 Half sine wave, 20g peak acceleration, 7 to 11 ms 3 impact on each of 6 faces 4.6.4 Vibration Stability CDPD Part 409 par. 5.2.3.2 (non-operational) Sinusoidal vibration at 1.5g acceleration swept through 5Hz to 500Hz, 0.1 octave/second 4.6.5 Regulatory compliance FCC title 47, parts 15 (class B) and 22. Resubmission is not required for the changes made in this product, including the changes made to name and part number. 4.6.6 ESD Protection No ESD protection is provided for the Expedite Wireless IP Modem. Expedite is intended to be used in an OEM application. It is the responsibility of the OEM manufacturer to provide the necessary ESD protection for their application.

NOVATEL WIRELESS TECHNOLOGIES LTD. Calgary, Alberta TITLE: Hardware Interface Specification for Expedite Wireless IP Modem DOCUMENT NO.: OM-01016529 SHEET: 14 of 17 REV: 3.0 4.7 CDPD Part 409 Compliance The module will meet the CDPD System Specification Part 409, Small Form-Factor Devices. CDPD Part 409 Specification Parameter Condition Upper Limit Lower limit 7.1.2.2 RX sensitivity in AWGN (Note a: small form factor M-ES) less than 5% block error rate -111 dBm 7.1.2.3 RX sensitivity in Raleigh fading (Note b: small form factor M-ES) -8 km/hr, 1% ber -50 km/hr, 1% ber -100 km/hr, 1% ber -98 dBm -100 dBm -101 dBm 7.2.3 Co-channel interference rejection and delay 8 us delay 17 dB rejection 7.3.3 Adjacent/Alternate channel selectivity +/-30 kHz from carrier +/-60 kHz from carrier 16 dB 60 dB 7.4.3 Intermodulation spurious response 57 dB 7.5.3 RSSI + 6 dB absolute + 3 dB relative - 6 dB absolute - 3 dB relative 7.6.1.2 Radiated spurious emissions 25 - 70 MHz 70 - 130 MHz 130 - 174 MHz 174 - 260 MHz 260 - 470 MHz 470 - 1000 MHz -45 dBm -41 dBm -41 to -32 dBm -32 dBm -32 to -26 dBm -21 dBm 7.6.2.2 Conducted spurious emissions 450 kHz - 2600 MHz 869.01 - 893.07 MHz 824.01 - 848.97 MHz -47 dBm -80 dBm -60 dBm 8.1.3 Frequency stability +2.5 PPM - 2.5 PPM 8.2.3 Phase noise 1 kHz 10 kHz -55 dBc/Hz -75 dBc/Hz 8.3.3 Emission spectrum adjacent channel alternate channel second alternate channel -26 dBc -45 dBc -60 dBc / –23dBm (whichever is lower) 8.4.3 Channel switching time 40 ms 8.5.3.3 Power stability (PA power levels) +2 dBm -4 dBm 8.5.4.3 Switching time requirements – on to off 2 ms 8.5.5.3 Release time requirements 2 ms 8.6.1.3 Modulation type 0.5 + 5% 19.2kbps + 50ppm 0.5 – 5% 19.2kbps – 50ppm 8.7.1.3 Radiated harmonic and spurious emissions 43 + 10 log(mean output power in Watts) dB 8.7.2.3 Conducted harmonic and spurious emissions 43 + 10 log(mean output power in

NOVATEL WIRELESS TECHNOLOGIES LTD. Calgary, Alberta TITLE: Hardware Interface Specification for Expedite Wireless IP Modem DOCUMENT NO.: OM-01016529 SHEET: 15 of 17 REV: 3.0 CDPD Part 409 Specification Parameter Condition Upper Limit Lower limit Watts) dB 5 INSTALLATION INSTRUCTIONS Unless the final product satisfies SAR (Specific Absorption Ratio) compliance through separate FCC approval, integration of this module into other products has some requirements which are outlined below. 5.1 Antenna Mounting The antenna must be mounted at a location such that no person(s) can come closer than 20 cm (7.9 inches) to the antenna when the transmitter is operating. 5.2 Antenna This module is limited to operate with an antenna with maximum of 2.15 dBi nominal gain or not to exceed 1.5 Watts ERP for any type of remotely mounted outdoor external antenna. 5.3 Labeling The following label, visible to all persons exposed to the transmitter, must be provided on the end product unless SAR compliance can be demonstrated: 5.4 User Manual You must also provide the above warning in the user manual for the end product and also include the following: Do not substitute any antenna for the one supplied by the manufacturer. You may be exposing person(s) to harmful radiation. contact the supplier or manufacturer for further instruction. Warning: All persons mustbe at least 20 cm fromantenna when transmitteroperating to meet FCC RFexposure requirements46.00mm.25.40mm.

NOVATEL WIRELESS TECHNOLOGIES LTD. Calgary, Alberta TITLE: Hardware Interface Specification for Expedite Wireless IP Modem DOCUMENT NO.: OM-01016529 SHEET: 16 of 17 REV: 3.0 5.5 Mounting Several methods are available for mounting the Expedite modem. The simplest for space constrained applications is a pressure fit. For applications where vibration is not an issue, double sided adhesive works well, although makes disassembly difficult. For applications where vibration is a concern, two mounting straps are available, a surface mount soldered version (Novatel part number 649496 00233 6) and a through – hole soldered version ( Novatel part number 649496 00232 9).

NOVATEL WIRELESS TECHNOLOGIES LTD. Calgary, Alberta TITLE: Hardware Interface Specification for Expedite Wireless IP Modem DOCUMENT NO.: OM-01016529 SHEET: 17 of 17 REV: 3.0 6 PACKAGING REQUIREMENTS 6.1 Shipping Packaging Packaging shall be appropriate for the shipping method. If the modem is to leave the ESD controlled environment, it should be packaged in an antistatic bag. 6.2 Labeling The modem labeling shall include: Product Label with FCC ID, country of origin, serial number, part number, and FCC compliance statement.