Intermec Technologies RFID2450PCC-5 RF Identification Tag PCMCIA Radio User Manual

Intermec Technologies Corporation RF Identification Tag PCMCIA Radio 010312M1

a href="https://usermanual.wiki/Intermec-Technologies" itemprop="url"> Intermec Technologies >

App N 6110 User Manual

Intermec Technologies Corporation REPORT NO: 010312-1EMC Test Laboratory DATE: March 12, 2001DOC. NO.: 577-500-979 Page 1 of  32450 PC Card Radio Module, FCC 15.247, Canada RSS-210, RSS-102 FCC ID: EHARFID2450PCC-5APPENDIX N, 6110 Users Manual and DoC insertTechnologies CorporationEMC Test LaboratoryCedar Rapids, IAMEASUREMENT/TECHNICAL REPORTIntermec Technologies CorporationRF Identification (RFID)  2450 PC Card –52.4 GHz  Spread Spectrum TransmitterREPORT NO: 010312-1DATE: March 12, 2001APPENDIX NDECLARATION OF CONFORMITY INSERT, USER INFORMATIONFOR THE INTERMEC 6110 TERMINAL
578-100-0xx   Revision A Page 1 of  2*578-100-0xx*  *578-100-0xx*Compliance Statement InsertDevice Name:  Hand-held Computer Model Number:  6110The responsible party for the compliance of this device is: Intermec Technologies Corporation6001 36th Avenue WestEverett, WA  98203  USA(425) 348-2600CAUTION:  See users guide instructions for handling, charging, and replacing batteries.  Failure to follow those instructions canresult in personal injury, fire, or battery explosion.This product conforms to the following approvals.   The user(s) of this product are cautioned to use accessories and peripheralsapproved by Intermec Technologies Corporation.  The use of accessories other than those recommended or changes to thisproduct that are not approved by Intermec Technologies Corporation may void the compliance of this product and may result inthe loss of the users authority to operate the equipment.RIM 902 Mobitex Radio Users FCC ID: EHAWANRIM902-6100WARNING. Per the FCC RF (radio frequency) exposure requirements:(1) Antennas must be supplied and installed as recommended by Intermec Technologies Corporation to ensure compliance toFCC RF exposure requirements.(2) The user shall not touch the terminal antenna and must remain 22-mm (7/8 of and inch) from the center of the antennawhile the transceiver is in use.(3) When installing and using Intermec approved remote antennas associated with the vehicle dock, a 23-cm (9-inch) passingdistance must be maintained from any body part of the user, or near-by persons, and the remote antenna.(4) Cables attached to the remote antennas must have a minimum length of 183-cm (6 feet) to provide the proper losses tocontrol RF exposure.(5) The correct mounting for external or remote antennas is on a ground plane (e.g., a vehicle rooftop) with the antennapositioned such that the minimum 23-cm distance is maintained from any edge of the vehicle rooftop to the remote antenna.RIM 802 ARDIS Radio Users FCC ID: EHAWANRIM802WARNING:  per the FCC RF (radio frequency) exposure requirements,(1) Antennas must be supplied and installed as recommended by Intermec Technologies to ensure compliance to FCC RFexposure requirements.(2) The user shall not touch the terminal antenna and is to remain 15-mm (5/8 of and inch) from the center of the antenna whilethe transceiver is in use.(3) When installing and using Intermec approved remote antennas associated the vehicle dock, a 20-cm (8-inch) passingdistance must be maintained from any body part of the user or near by persons and the remote antenna.(4) Cables attached to the remote antennas must have a minimum length of 183-cm (6 feet) to provide the proper losses tocontrol RF exposure.(5) The correct mounting for external or remote antennas would be on a ground plane (vehicle roof), and positioning theantenna such that the minimum 20 cm is kept from any edge of the vehicle rooftop and the remote antenna.INTERMEC RFID 2450 PC Card Radio Users FCC ID: EHARFID2450PCC-5WARNING:  per the FCC RF (radio frequency) exposure requirements,(1) Antennas must be supplied and installed as recommended by Intermec Technologies to ensure compliance to FCC RFexposure requirements.(2) The user shall not touch the terminal top (antenna) and is to remain 5-cm (2 of and inches) from the front of the antennawhile the transmitter is in use.INTERMEC RFID 2450 PC Card Radio Users Canada ID: xxxxxxxxxxWARNING CANADA USERS: To prevent radio interference to the licensed service, this device is intended to be operatedindoors and away from windows to provide maximum shielding.  Equipment (or its transmit antenna) that is installed outdoors issubject to licensing.  The end user is responsible to obtain the license.WARNING:  per Canada RSS-102, RF (radio frequency) exposure requirements,(1) Antennas must be supplied and installed as recommended by Intermec Technologies to ensure compliance to FCC RFexposure requirements.(2) The user shall not touch the terminal top (antenna) and is to remain 5-cm (2 of and inches) from the front of the antennawhile the transmitter is in use.
Download:
Mirror Download [FCC.gov]
Document ID151287
Application IDkplF8JaUFFhIyyuuIS95fg==
Document DescriptionApp N 6110 User Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize1.88kB (23544 bits)
Date Submitted2001-05-23 00:00:00
Date Available2001-09-25 00:00:00
Creation Date2001-05-18 16:11:22
Producing SoftwareAcrobat PDFWriter 4.0 for Windows
Document Lastmod2001-05-23 08:14:49
Document Title010312N1.PDF
Document CreatorMicrosoft Word
Document Author: Intermec User
FCC ID Filing: EHARFID2450PCC-5

Navigation menu