Intermec Technologies RFID2450PCC-5 RF Identification Tag PCMCIA Radio User Manual 010312N1
Intermec Technologies Corporation RF Identification Tag PCMCIA Radio 010312N1
Contents
Rev C App N 6100 User Info RF Safety
Intermec Technologies Corporation REPORT NO: 010312-1
EMC Test Laboratory DATE: March 12, 2001
DOC. NO.: 577-500-979 Page 1 of 3
2450 PC Card Radio Module, FCC 15.247, Canada RSS-210, RSS-102 FCC ID: EHARFID2450PCC-5
APPENDIX N, Rev. C, 6110 Users Manual and DoC insert
Technologies Corporation
EMC Test Laboratory
Cedar Rapids, IA
MEASUREMENT/TECHNICAL REPORT
Intermec Technologies Corporation
RF Identification (RFID) 2450 PC Card –5
2.4 GHz Spread Spectrum Transmitter
REPORT NO: 010312-1
DATE: March 12, 2001
APPENDIX N
DECLARATION OF CONFORMITY INSERT, USER INFORMATION
FOR THE INTERMEC 6110 TERMINAL
578-100-0xx Revision C Page 1 of 2
*578-100-0xx*
*578-100-0xx*
Compliance Statement Insert
Device Name: Hand-held Computer Model Number: 6110
The responsible party for the compliance of this device is: Intermec Technologies Corporation
6001 36th Avenue West
Everett, WA 98203 USA
(425) 348-2600
CAUTION: See users guide instructions for handling, charging, and replacing batteries. Failure to follow those instructions can
result in personal injury, fire, or battery explosion.
This product conforms to the following approvals. The user(s) of this product are cautioned to use accessories and peripherals
approved by Intermec Technologies Corporation. The use of accessories other than those recommended or changes to this product
that are not approved by Intermec Technologies Corporation may void the compliance of this product and may result in the loss of
the users authority to operate the equipment.
This device complies with part 15 of the FCC and Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC Digital Emissions Compliance
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the radio of television receiving antenna.
• Increase the separation between the computer equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the radio or television receiver is connected.
• Consult the dealer or an experienced radio television technician for help.
Canadian Digital Apparatus Compliance
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada.
INTERMEC RFID 2450 PC Card Radio Users FCC ID: EHARFID2450PCC-5, Canada: xxxxxxxxxx
WARNING: per the FCC and Canadian RF (radio frequency) exposure requirements,
(1) Antennas must be supplied and installed as recommended by Intermec Technologies to ensure compliance to RF exposure
requirements.
(2) This device has been tested for compliance with a separation distance of 2.5-cm (1 inch) from the terminal top and 0.5-cm (1/4
inch) from the terminal back to a person's body. The operating configurations of this device generally do not support normal
operation while it is carried in pockets or holsters next to a person’s body. The user shall not touch the terminal top (antenna)
and is to remain 2.5-cm (1 inch) from the front of the antenna while the transmitter is in use. Operation of the terminal while
the unit is in the hand provides the 0.5-cm (1/4-inch) distance requirement for safe operation next to the body.
(3) RF safety requirements mandate this device cannot be co-located with other transmitters.
WARNING: Canada Users of RFID 2450 PC Card Radio: To prevent radio interference to the licensed service, this device is
intended to be operated indoors and away from windows to provide maximum shielding. Equipment (or its transmit antenna) that
is installed outdoors is subject to licensing. The end user is responsible to obtain the license.
578-100-0xx Revision C Page 2 of 2
*578-100-0xx*
*578-100-0xx*
Telephone Installation Warning Notices
The following notices apply to equipment that may be connected to telephone lines or systems. For your personal safety, and to protect this equipment
from potential electrical or physical damage, do NOT connect equipment to telephone lines or data communication equipment unless the following warnings
have been read, understood, and complied with.
• Never install telephone wiring during a lightning storm.
• Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations.
• Never touch uninsulated telephone wires or terminals unless the telephone line has been disconnected at the network interface.
• Use caution when installing or modifying telephone lines.
• Avoid using telephone (other than cordless type) during an electrical storm. There may be a remote risk of electric shock from lightning.
• Do not use the telephone to report a gas leak in the vicinity of the leak.
Installation do téléphone : avertissements
Les avertissements qui suivent s'appliquent à tout équipement qui peut être branché aux lignes ou systemes téléphoniques. Pour votre sécurité personnelle
et pour protéger l'équipement de tout dommage électrique ou physique potentiel, NE PAS brancher un ordinateur tablette électronique ou ses périphériques
aux lignes téléphoniques ou équipements avant que les avertissements suivants aient été lus, compris et observés:
• Ne jamais installer de câblage téléphonique pendant un orage électrique.
• Ne jamais installer de prise téléphonique dans un endroit humide à moins que la prise ait été spécifiquement conçue pour être utilisée dans les
endroits humides.
Ne jamais toucher les fils de téléphone ou de l'équipement terminal non isolés à moins que la ligne téléphonique n'ait été débranchée de l'interface réseau.