Intermec Technologies RFID915PCC-6 RF Identification PC Card User Manual 041116H2 User Info
Intermec Technologies Corporation RF Identification PC Card 041116H2 User Info
Contents
- 1. appendix l User Info DoC For PC Card
- 2. appendix m User Info DoC 6110 hand held terminal
- 3. Rev B App L PC Card Users Maunal
- 4. Rev B App M 6110 Users Maunal
- 5. Rev C App L Module RFID 915PC Card User Maunal
- 6. Rev C App M 6110 User Maunal
- 7. Users Manual
- 8. User Manual Supplement
- 9. co location user info and compliance statement
- 10. User Info and Compliance Statement
co location user info and compliance statement
Intermec Technologies Corporation EMC Test Laboratory DOC. NO.: 577-501-218 Co-Locate Radio Modules, IM3 and C30XX, 15.247, RSS-210, RSS-102 APPENDIX H, User Information REPORT NO: 041116-2 DATE: November 16, 2004 Page 1 of 1 FCC ID: EHARFID915PCC-6 MEASUREMENT/TECHNICAL REPORT Technologies Corporation EMC Test Laboratory Cedar Rapids, IA Intermec Technologies Corporation IV6 Transmitter Co-Location of FCC ID: EHARFID915PCC-6 (IC: 1223A-RFIDPCC6) And FCC ID: HN2-C30XX (IC: 1223A-C30XX) REPORT NO: 041116-2 DATE: November 16, 2004 Appendix H USER INFORMATION Page 2 IV6 Regulatory Compliance Information Insert Compliance Statement Insert Device Name: Vehicle Mounted RFID Reader Model Number: IV6 The responsible party for the compliance of this device is: Intermec Technologies Corporation 6001 36th Avenue West Everett, WA 98203 USA (425) 348-2600 This product conforms to the following approvals. The user(s) of this product are cautioned to use accessories and peripherals approved by Intermec Technologies Corporation. The use of accessories other than those recommended or changes to this product that are not approved by Intermec Technologies Corporation may void the compliance of this product and may result in the loss of the users authority to operate the equipment. This device complies with Part 15 of the FCC rules. Operation is subject to the two following conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Digital Emissions Compliance Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. Canadian Digital Apparatus Compliance This Class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. Cet appareil numérique de la classe A respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada. WARNING: per the FCC and Canada RF (radio frequency) exposure requirements, (1) The IV6 antenna must be installed as recommended by Intermec Technologies to ensure compliance to RF exposure requirements. Correct antenna mounting is fully described within the Intermec IV6 Users Guide. (2) When installing and using Intermec Technologies the IV6 RFID tag reader, a 20-cm (8-inch) passing distance must be maintained from any body part of the user or near by persons and the antenna. The antenna must not be touched during transmitter operation. (3) RF safety requirements mandate this device cannot be co-located with other transmitters. WARNING: Canada procedures defined in RSS-210 "The installer of this radio equipment must ensure that the antenna is located or pointed such that it does not emit RF field in excess of Health Canada limits for the general population; consult Safety Code 6, obtainable from Health Canada’s website www.hc-sc.gc.ca/rpb" 578-100-0xx Revision C *578-100-0xx* *578-100-0xx* Page 1 of 1
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Page Count : 2 Has XFA : No XMP Toolkit : XMP toolkit 2.9.1-14, framework 1.6 About : uuid:d4f580f1-d8ae-4f0b-8810-7b6326d39e4d Producer : Acrobat Distiller 6.0.1 (Windows) Create Date : 2005:01:19 16:36:45-06:00 Creator Tool : PScript5.dll Version 5.2.2 Modify Date : 2005:01:25 09:53:34-06:00 Metadata Date : 2005:01:25 09:53:34-06:00 Document ID : uuid:8c8e6cd5-f78b-4c67-996c-d7c7a409681d Format : application/pdf Title : Microsoft Word - 041116H2 User Info.doc Creator : frydave Author : frydaveEXIF Metadata provided by EXIF.tools