Intermec Px4I Users Manual 1 960625 01 UG EC (IPL)

2015-02-02

• Disclaimer
• Copyright Information
• Trademarks
• Document Change Record
• Contents
• Before You Begin
  • Safety Icons
  • Global Service and Support
• 1 Introduction
  • Description of EasyCoder PX4i
  • Safety Summary
  • Product Identification
• 2 Installation
  • Unpacking the Printer
  • Front View
  • Rear View
  • Media Compartment
  • Print Mechanism
  • Connections
  • Controls and Indicators
• 3 Starting Up
  • Switching On the Printer
• 4 Media Load
  • Tear-Off (Straight Through)
  • Cut-Off
  • Peel-Off (Self-Strip)
  • Internal Batch Takeup (Roll-to-Roll)
  • External Supply (Fan-Fold)
• 5 Thermal Transfer Printing
  • Ribbon Load
• 6 Setting Up the Printer
  • Description
  • Default Setup
  • Setup Parameters
  • Returning to Factory Default Setup
• 7 Setup Mode
  • Navigating in Setup Mode
• 8 Options
  • Introduction
  • Liner/Batch Takeup Kit
  • Paper Cutter
  • Fan-Fold Guides
  • Media Roll Retainer
  • 3-in Adapter
  • Label Taken Sensor
  • Interface Boards
• 9 Troubleshooting
  • Intermec Readiness Indicator
• 10 Maintenance
  • Printhead Cleaning
  • External Cleaning
  • Cleaning the Label Stop Sensor
  • Printhead Replacement
  • Media Jams
• 11 Adjustments
  • Narrow Media
  • Printhead Pressure
  • Label Stop Sensor
• Appendix A Technical Data
• Appendix B Media Specifications
  • Media Roll Size
  • Media
• Appendix C Interfaces
  • RS-232 Interface
  • USB Interface
  • Optional Interfaces
• Appendix D Intermec Supplies
  • Setting the Media Sensitivity Number