Invacare 2Gr Users Manual
2GT to the manual 2e4af161-f063-e764-dd53-003d6cccefa8
2015-02-02
: Invacare Invacare-2Gr-Users-Manual-433145 invacare-2gr-users-manual-433145 invacare pdf
Open the PDF directly: View PDF 
.
Page Count: 173
| Download | |
| Open PDF In Browser | View PDF |
Parts Catalog Issued: Jun 25, 2008 Tarsys® Tilt Only (2GT™) Recline Only (2GR™) Tilt and Recline (2GTR™) For Storm Series® TDX® Powered Wheelchairs Yes, you can. ™ Parts Catalog Usage Guide The information contained in this document is subject to change without notice. This catalog contains service parts for Form No. 03-026. If you have any questions regarding this catalog, please contact one of our Customer Service Representatives. For Customer Service Support Call: 1-800-333-6900 For Faxed In Orders Call: 1-800-678-4682 or 1-440-366-0709 For Technical Service Call: 1-800-832-4707 Literature Can Be Found at: www.invacare.com or 1-800-828-6272 SYMBOL DEFINITION Throughout this catalog you will notice letters to draw your attention to specific footnotes which are located at the bottom of the page or below specified charts. Examples: A,B,C etc. = NOTE: = NLA = Special Comments General information pertaining to that specific page No Longer Available HARDWARE MEASUREMENTS The measurements for the hardware will be listed as follows: Screws, Bolts Diameter X Thread Count/Pitch X Length Washers Inside Diameter X Outside Diameter X Thickness Spacers Inside Diameter X Outside Diameter X Length For your convenience, we have supplied an area for you to list your Invacare Representatives. Name Phone Numbers ©2008 Invacare Corporation. Elyria, Ohio. Invacare, Yes, you can., the Blue Medallion Design, SureStep, Storm Series, TDX, Tarsys, Silhouette, Contour U are registered trademarks and 2GT, 2GR, 2GTR, MKIV, MK5, Personal Back, and Infinity are trademarks of Invacare Corporation. Otto Bock is a registered trademark owned by Otto Bock Orthopaedische Industrie GMBH & Co.. JAY Back is a registered trademark of Sunrise Medical HHG, Inc. Corporation 1 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com TABLE of CONTENTS Page Number Description Accessories, Arm Pads - Otto Bock ......................................................................................... 145 Accessories, Back Mtg. Hardware (Infinity, Personal, JAY, Silhouette, Contour U Backs w/ Extruded Canes) (Profile Back w/ 7/8" Round Canes) 154 Accessories, Headrest Support Assembly - A.B.S. Curved and Profile Back .......................... 147 Accessories, Lateral Support Assembly - (Clamp-On) For Round Canes ............................... 151 Accessories, Lateral Support Assembly - For Extruded Canes ............................................... 149 Accessories, Miscellaneous .................................................................................................... 168 Accessories, Power Wheelchair Tool Kit .................................................................................. 166 Accessories, Vent Tray Assembly without Mounting Hardware ............................................... 157 Accessories, Vent Tray Kit For Extruded & Round Back Canes .............................................. 163 Accessories, Vent Tray Mounting Hardware For Extruded Back Canes .................................. 159 Accessories, Vent Tray Mounting Hardware For Round Back Canes ...................................... 161 Armrest Assembly - 2GR and 2GTR ........................................................................................ 65 Armrest Assembly - 2GT .......................................................................................................... 62 Back Assembly Mounting Hardware - A.B.S. Curved and Profile ............................................ 55 Back Assembly Mounting Hardware - A.B.S. Curved Back For (7/8" Round) Back Canes ..... 58 Back Assembly V.S.R. Actuator Motor and Mounting Hardware - 2GR and 2GTR ................. 60 Back Cane (7/8" Round-Optional) and Spreader Bar Assembly - 2GR and 2GTR .................. 37 Back Cane (7/8" Round-Optional) and Spreader Bar Assembly - 2GT .................................... 35 Back Cane and Spreader Bar Assembly - 2GR and 2GTR ...................................................... 39 Back Cane and Spreader Bar Assembly - 2GT ........................................................................ 33 Back, A.B.S. Curved without Mounting Hardware - 2GR and 2GTR with V.S.R. ..................... 47 2 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com TABLE of CONTENTS Page Number Description Back, A.B.S. Curved without Mounting Hardware - 2GT .......................................................... 41 Back, Profile without Mounting Hardware ................................................................................ 53 Battery Box Hardware and Door Assembly .............................................................................. 10 Battery Support Bracket Assembly TRBKTS Option ................................................................ 12 Battery Tray Asbly. and Wire Harnesses For Vent Tray (3) 22NF Batteries ............................ 14 Conversion Kit - 2GR To 2GTR For TDX ................................................................................. 170 Electronics - 4-Way Switch and Mounting Hardware ............................................................... 120 Electronics - MK5 SAC and Mounting Hardware ..................................................................... 122 Electronics - MK5 TAC/TRCM and Mounting Hardware For Extruded Back Canes ................ 124 Electronics - MK5 TAC/TRCM and Mounting Hardware For Round Back Canes .................... 126 Electronics - Quad Link (QLA) After 10/30/05 .......................................................................... 143 Electronics - Quad Link 1/13/04 Thru 10/30/05 ........................................................................ 139 Electronics - Quad Link 10/9/03 Thru 1/12/04 For 1556 Heavy Duty Joystick ......................... 137 Electronics - Quad Link 10/9/03 Thru 1/12/04 For MK5 DPJ Joystick ..................................... 133 Electronics - Quad Link 10/9/03 Thru 1/12/04 For MK5 MPJ Joystick ..................................... 135 Electronics - Quad Link Before 10/9/03 .................................................................................... 130 Electronics - Tilt Recline Single Switch (TRSS) ....................................................................... 118 Electronics - Tilt/ Recline Potentiometers and Hardware ......................................................... 128 Frame, Center Seat Assembly - 2GR (Recline Actuator Included) .......................................... 24 Frame, Center Seat Assembly - 2GT ....................................................................................... 22 Frame, Center Seat Assembly - 2GTR (Recline Actuator Included) ........................................ 26 3 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com TABLE of CONTENTS Page Number Description Frame, Center Seat Mounting Hardware ................................................................................. 28 Frames, Side ............................................................................................................................ 20 Front Rigging - Adjustable Angle Footplates - AT5543 ............................................................ 98 Front Rigging - Calf Pads and Mounting Hardware .................................................................. 93 Front Rigging - Center Mount Rigging KIT (CTMT-T/CTMT-TL) .............................................. 108 Front Rigging - Center Mount Rigging Mounting Hardware (CTMT-T/CTMT-TL) .................... 106 Front Rigging - Center Mount Riggings (CTMT-T/CTMT-TL) ................................................... 103 Front Rigging - Footrest and Legrest Accessories ................................................................... 100 Front Rigging - Footrest Supports - 70 Degree Non-Tapered and Tapered ............................ 76 Front Rigging - Footrest Supports, (Hemi) - PHW93 ................................................................ 78 Front Rigging - Front Rigging Hanger Assembly - Pin, Sector and Genius Style .................... 73 Front Rigging - Legrest Support Push Rod Assembly .............................................................. 91 Front Rigging - Legrest Supports - AT5544 ............................................................................. 83 Front Rigging - Legrest Supports, (Mechanical) - AT5544P ................................................... 85 Front Rigging - Legrest Supports, Articulating (Hemi) - PHAL4A ............................................. 80 Front Rigging - Legrest, Genius (Mechanical) .......................................................................... 87 Front Rigging - Pivot/Slide Tube and 1650, 1350 Aluminum Footplates .................................. 97 Front Rigging - Pivot/Slide Tube and 1651 Composite Footplates .......................................... 95 Front Rigging - Power Articulating Legrest Harnesses and Hardware ..................................... 116 Front Rigging - Power Articulating Legrest, ELRPW/ELRPW22 After 7/26/04 ........................ 113 Front Rigging - Power Articulating Legrest, ELRPW/ELRPW22 Before 7/27/04 ..................... 110 4 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com TABLE of CONTENTS Page Number Description Front Rigging - Reference Chart - 70ST TAPER ..................................................................... 72 Front Rigging - Reference Chart - AT5544, 70NHD, PHW93 .................................................. 70 Front Rigging - Reference Chart - PHAL4A ............................................................................. 71 Interface Hardware - Attach 2GR To Battery Box .................................................................... 18 Interface Hardware & Tilt Actuator - Attach 2GT, 2GTR To Battery Box ................................. 16 Label Locations For TRBKTS Option ....................................................................................... 8 Packaging and Literature ......................................................................................................... 6 Seat Pan ................................................................................................................................... 30 Seat Pan Mounting Hardware ................................................................................................. 31 Shroud Covers, Rear, Side, Lower Seat and V.S.R. Actuator ................................................. 68 TRBKTS Option Clarification Reference .................................................................................. 9 5 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com Packaging and Literature 6 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com Packaging and Literature Item Number Note 1 2 3 4 5 6 7 8 9 10 11 B D A A A,C A,C NOTE: Quantity Per Part Number 1030364 1091514 40131X161 1106472 1021149 1080876 40131X045 1091517 See Note 1030362 1115174 1114809 00077X031 1031682 1030362 Description Package Assembly Carton, Cover Insert, Carton Insert, Plain Pad Carton Bag, Poly Zip-Lip (13" Long x 9" Wide) Carton Carton Carton See Footnote Carton, Tray Carton, Corner Reinforcement Manual, Owner's TDX w/ MK5 Electronics Warranty Card Carton, Cover Carton, Tray A - Not Shown B - All Systems C - Complete Seating Systems with Chair Base D - Wood skid not supplied NOTE: When adjusting or replacing parts, please refer to you Owner's Manual for assistance. 7 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 1 1 2 4 1 1 1 1 Label Locations For TRBKTS Option 8 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com TRBKTS Option Clarification Reference TRBKTS Option was introduced 12/19/05 as an On-Chair option only. 9 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com Battery Box Hardware and Door Assembly The Battery Boxes are non-serviceable parts. Call Technical Services for assistance (1-800-832-4707) 10 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com Battery Box Hardware and Door Assembly The Battery Boxes are non-serviceable parts. Call Technical Services for assistance (1-800-832-4707) Item Number Note 1 2 3 4 5 6 8 9 10 11 12 5 6 8 9 10 11 12 5 A Part Number 1133026 B,D 1113357 B,D 1113127 C,D 1121072 6 7 8 9 10 11 NOTE: Quantity Per Description Package Assembly Kit, Battery Box Hardware Screw, Phillips Pan Head Tap (#10-32 x 1/2") Screw, Socket Head Cap (#10-32 x 1/2") Cover, Battery Box Shroud Kit, Battery Box Door Assembly, 22NF Short Label, 22NF Terminal Configuration Warning Decal, Blank Logo Decal, Invacare Medallion - Large Locknut (1/4-20) Sleeve, Door Pivot Label, 22NF Battery Install/Remove Kit, Battery Box Door Assembly, GP24 Short Label, GP24 Terminal Configuration Warning Decal, Blank Logo Decal, Invacare Medallion - Large Locknut (1/4-20) Sleeve, Door Pivot Label, GP24 Battery Install/Remove Kit, Battery Box Door Assembly, 22NF Long (For Vent) Label, 22NF Terminal Configuration Warning Label, 3 Battery Configuration Warning Decal, Blank Logo Decal, Invacare Medallion - Large Locknut (1/4-20) Sleeve, Door Pivot 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 6 2 1 1 1 1 1 2 2 1 1 1 1 1 2 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2 A - Includes items 2-4 B - Includes items 6 and 8-12 C - Includes items 6-11 D - Blank Logo Decal is no longer available and no longer required for item number 9 Invacare Medallion Decal. 11 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com Battery Support Bracket Assembly For TRBKTS Option 12 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com Battery Support Bracket Assembly For TRBKTS Option Item Number Note 1 2 3 4 1 2 3 4 1 4 5 1 2 3 4 1 4 5 1 A A B A B B Quantity Per Part Number 1139537 1139538 1139539 1139540 1139541 1139867 4 5 NOTE: Description Package Assembly Kit, Battery Support Bracket Assembly - For 22NF Batteries Screw, Hex Head Cap w/ Patch (1/4-20 x 1/2") Locknut (1/4-20) Bracket, Battery Support, Black Kit, Battery Support Bracket Assembly - For GP24 Batteries Screw, Hex Head Cap w/ Patch (1/4-20 x 1/2") Locknut (1/4-20) Bracket, Battery Support, Black Kit, Battery Support Bracket Assembly - For Invisible Super Low Tilt System w/ 22NF Batteries Bracket, Battery Support, Black Screw, Hex Head Cap w/ Patch (1/4-20 x 1/2") Kit, Battery Support Bracket Assembly - For Vent "Ready" System w/ 22NF Batteries Screw, Hex Head Cap with Patch (1/4-20 x 5/8") Locknut (1/4-20) Bracket, Battery Support, Black Kit, Battery Support Bracket Assembly - For Vent "Option" System w/ 22NF Batteries Bracket, Battery Support, Black Screw, Hex Head Cap w/ Patch (1/4-20 x 1/2") Kit, Battery Support Bracket Assembly - For Elevate "Option" System w/ 22NF Batteries Bracket, Battery Support, Black Screw, Hex Head Cap w/ Patch (1/4-20 x 1/2") A - Includes items 2-4 B - Includes items 4 and 5 13 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com 1 1 1 1 1 1 4 4 1 1 1 1 1 1 4 4 1 1 1 1 1 1 4 1 1 1 1 1 4 4 1 1 1 1 1 1 4 1 1 1 1 4 Battery Tray Assembly and Wire Harnesses For Vent Tray (3) 22NF Batteries 14 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com Battery Tray Assembly and Wire Harnesses For Vent Tray (3) 22NF Batteries Item Number Note Quantity Per 1 B,A Part Number 1120363 2 B,A 1120362 3 B,A 1121143 C D 16721X000 1095502 1096799 1121124 1121125 1117186 90017X000 1121142 1121029 D 1139531 4 5 6 7 8 9 10 11 12 13 14 15 16 17 12 13 14 15 16 17 16 17 17 NOTE: 1095503 1055747 1137236 Description Package Assembly Kit, Battery Wire Harness with Terminal Hardware, 22NF - Rear Kit, Battery Wire Harness with Terminal Hardware, 22NF - Front Battery Wire Harness with Terminal Hardware, 22NF Vent Locknut (1/4-20) Package, Cable Ties (11-1/2") Screw, Hex Flange Whiz Lock (1/4-20 x 7/8") Battery Strap Assembly, 22NF and GP24 Battery Strap Assembly For Vent, 22NF Bracket, Battery Tray Stop, Black Screw, Phillips Pan Head (#10-32 x 5/16") Battery Tray Assembly, TDX 22NF For Vent Kit, Vent Battery Harness Assembly with Hardware Vent Battery Harness Vent Battery Extension Harness Screw, Phillips Pan Head (#8-16 x 5/8") Cable Tie (5-5/8" Long) Grommet, Rubber Kit, Vent Battery Harness Assembly with Hardware For TRBKTS Option Vent Battery Harness Vent Battery Extension Harness For TRBKTS Option Screw, Phillips Pan Head (#8-16 x 5/8") Cable Tie (5-5/8" Long) Grommet, Rubber For TRBKTS Option Package, Cable Ties (5-5/8" Long) Grommet, Rubber Grommet, Rubber For TRBKTS Option A - Individual components are not available for the battery wire harnesses B - Includes items 4-6 C - Includes items 7-10 D - Includes items 13-17 15 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com 1 1 1 1 1 1 1 10 1 1 1 1 1 1 1 1 1 1 1 1 1 6 1 4 2 1 1 2 1 1 1 1 2 4 1 1 1 1 1 1 1 1 1 10 1 1 2 4 1 1 1 1 Interface Hardware and Tilt Actuator (To Attach 2GT, 2GTR To The Battery Box) Tilt Only (2GT) and Tilt/Recline (2GTR) 16 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com Interface Hardware and Tilt Actuator (To Attach 2GT, 2GTR To The Battery Box) Tilt Only (2GT) and Tilt/Recline (2GTR) Item Number Note 1 2 3 4 5 6 7 8 9 10 10 11 12 13 14 15 16 16 17 18 19 19 19 19 20 21 22 NOTE: E Quantity Per Part Number 1082778 1105039 1070411 1026158 1082877 1113618 1113594 1091869 B C 1064267 1114962 1108429 B B C C D A F G 1031665 1113604 1025704 1043629 1118370 1120348 1120349 1071955 1028769 1114964 1114965 1140829 1140830 1121117-NLA 1113602 1140059 1141508 Description Package Assembly Actuator, Tilt - For All User Weight Limits Bushing (3/8 x 5/8 x 1/2") Bolt, Shoulder (3/8 x 2-1/2") Locknut (5/16-18) Bar, Clamp, Black Guide, Short Linear Pivot Assembly, Rear Screw, Socket Flat Head C'sunk with Patch (1/4-20 x 3/4") Locknut (5/16-18) Screw, Socket Head Cap (5/16-18 x 1") Screw, Socket Head Cap with Patch (5/16-18 x 1-1/4") Screw, Socket Head Shoulder (3/8 x 1-1/2") Pivot Assembly, Front Washer, Flat (5/16 x 5/8 x 1/16") Screw, Hex Head Cap with Patch (5/16-18 x 1-1/4") Decal, 2GTR Seat Repositioning Warning Kit, Bracket w/ Decal, Black - Right (2GTR) Kit, Bracket w/ Decal, Black - Left (2GTR) Screw, Socket Button Head (5/16-18 x 3/4") Locknut (5/16-18) Bracket, Lower Interface, Black - Right Bracket, Lower Interface, Black - Left Bracket, Lower Interface, Black - Right Bracket, Lower Interface, Black - Left Shim, Short Seat Guide Slide 2GT/ 2GTR Interface Hardware Kit, Actuator Braking Module w/ Instruction Sheet Instruction Sheet, Actuator Braking Module 1 1 1 1 1 1 1 1 1 2 1 8 2 2 1 6 1 1 1 6 4 4 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 10 6 2 1 1 6 4 1 1 1 1 2 1 1 1 A - Includes items 1-20 and used to attach a 2GT or 2GTR to the battery box. When item 21 is ordered, item19 Lower Interface Bracket made after 12/18/05 will be shipped. The seat to floor height will be raised 1/4". B - Before 12/19/05 C - After 12/18/05 D - Item 20 is no longer used after 12/18/05 E - Actuator Braking Module added to Tilt Actuator and is backward compatible to all systems manufactured before 5/18/06. The addition of the braking module eliminated the requirement of a Heavy Duty Tilt Actuator. F - Actuator Braking Module can be assembled in the field on seating systems manufactured before 5/18/06 as well. Must verify with an Invacare Technician when a kit is required. G - Not Shown 17 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com Interface Hardware (To Attach 2GR To The Battery Box) Recline Only (2GR) 18 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com Interface Hardware (To Attach 2GR To The Battery Box) Recline Only (2GR) Item Number Note 1 2 2 3 4 5 6 7 8 8 9 10 11 12 12 12 12 13 14 NOTE: B C B B C C A Quantity Per Part Number 1113594 1030949 1024793 1086943 1064267 1113604 1026158 1025704 1120348 1120349 1118370 1043629 1071955 1114964 1114965 1140829 1140830 1025195 1113603 Description Package Assembly Pivot Assembly, Rear Screw, Hex Head (1/4-20 x 1-1/2") Screw, Hex Head (1/4-20 x 1-3/4") Bar, Spacer, Black Locknut (5/16-18) Pivot Assembly, Front Locknut (5/16-18) Washer, Flat (5/16 x 5/8 x 1/16") Kit, Bracket w/ Decal, Black - Right (2GTR) Kit, Bracket w/ Decal, Black - Left (2GTR) Decal, 2GTR Seat Repositioning Warning Screw, Hex Head Cap with Patch (5/16-18 x 1-1/4") Screw, Socket Button Head (5/16-18 x 3/4") Bracket, Lower Interface, Black - Right Bracket, Lower Interface, Black - Left Bracket, Lower Interface, Black - Right Bracket, Lower Interface, Black - Left Locknut (1/4-20) 2GR Interface Hardware 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 6 6 2 6 1 6 12 1 1 2 6 6 1 1 1 1 6 1 A - Includes items 1-13 and used to attach a 2GR to the battery box. When item 14 is ordered, item12 Lower Interface Bracket made after 12/18/05 will be shipped. The seat to floor height will be raised 1/4". B - Before 12/19/05 C - After 12/18/05 19 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com Side Frames NOTE: A new cross beam may be required when changing seat width for a Recline Only or Tilt/Recline system. See Center Seat Frame Assembly page. 20 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com Side Frames NOTE: A new cross beam may be required when changing seat width for a Recline Only or Tilt/Recline system. See Center Seat Frame Assembly page. Item Number Note 1 2 3 4 5 6 A Quantity Per Part Number 1087002 7930333 1047449 1026099 1037610 1086976 6 1086977 6 1086978 6 1086979 6 1086980 6 1086981 6 6 7 7 7 7 1086982 1086983 7930347 47471X074 1028594 1090768 NOTE: B B B B Description Package Assembly Hardware, Side Frame Mounting Locknut (1/4-20) Spacer (1/4 x 3/8 x 3/16") Spacer, Coved (1/4 x 11/16 x 1/2") Screw, Hex Head (1/4-20 x 1-5/8") Side Frame w/ Arm Lock Assembly, 16"-17" Deep, Right Side Frame w/ Arm Lock Assembly, 16"-17" Deep, Left Side Frame w/ Arm Lock Assembly, 18"-19" Deep, Right Side Frame w/ Arm Lock Assembly, 18"-19" Deep, Left Side Frame w/ Arm Lock Assembly, 20"-21" Deep, Right Side Frame w/ Arm Lock Assembly, 20"-21" Deep, Left Side Frame w/ Arm Lock Assembly, 22" Deep, Right Side Frame w/ Arm Lock Assembly, 22" Deep, Left Pin Roll (5/64 x 5/8") Spring, Arm Lock Pin, Arm Lock Kit, Lock Handle w/Rivets (both LT & RT side) A - Includes Items 2-5 B - Arm Lock Assembly 21 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com 1 25 1 1 1 1 1 4 4 4 4 1 1 1 1 1 1 1 1 1 1 1 1 1 25 1 1 1 1 1 2 2 2 1 Center Seat Frame Assembly Tilt Only (2GT) 22 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com Center Seat Frame Assembly Tilt Only (2GT) Item Number Note 1 1 2 2 3 3 4 5 6 7 8 9 10 NOTE: A A Quantity Per Part Number 1115859 1115858 1113613 1113614 1086590 1086591 1012371 1061922 1082876 1086595 1065214 1086930 1091502 Description Package Assembly Center Seat Frame Assembly, Short (16"-19" Deep) Center Seat Frame Assembly, Long (20"- 22" Deep) Center Seat Frame, Short (16"-19" Deep) Center Seat Frame, Long (20"- 22" Deep) Tilt Pivot Assembly, Right Tilt Pivot Assembly, Left Washer, Nylon (3/8 x 7/8 x 1/16") Screw, Hex Head Cap w/ Patch (5/16-18 x 1/2") Spacer (3/8 x 3/4 x 3/8") Link, Tilt Washer, Flat (3/8 x 11/16 x 1/16") Ring, Retaining (3/8") Guide, Tilt Rail A - Includes Items 2-10 23 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 8 2 2 2 4 4 4 Center Seat Frame Assembly Recline Only (2GR) 24 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com Center Seat Frame Assembly Recline Only (2GR) Item Number Note Quantity Per 1 2 2 3 4 5 6 7 7 7 7 8 9 10 11 12 13 Part Number 1086944 1082878 1082879 1026158 1031665 1082750 1012371 1110497 1110498 1110499 1110500 1065214 1086930 1082876 1025704 1079203 1091500 13 14 15 16 17 18 19 19 1091501 1098944 1095352 1091503 1026035 1000212 1095476 1095477 NOTE: A A Description Package Assembly Screw, Socket Head Cap (5/16-18 x 3/4") Bracket, Screw Support Acutator, Right Bracket, Screw Support Acturator, Left Locknut (5/16-18) Screw, Socket Head Shoulder (3/8 x 1-1/2") Actuator, Recline Washer, Nylon (3/8 x 7/8 x 1/16") Link, Recline 0 and 5 Degree Seat Tilt, Right Link, Recline 0 and 5 Degree Seat Tilt, Left Link, Recline 10 and 15 Degree Seat Tilt, Right Link, Recline 10 and 15 Degree Seat Tilt, Left Washer, Flat (3/8 x 11/16 x 1/16") Ring, Retaining (3/8") Spacer (3/8 x 3/4 x 3/8") Washer, Flat (5/16 x 5/8 x 1/16") Decal, Warning Pinch Point Kit, Connecting Slide Bracket w/ Decal, Black Right Kit, Connecting Slide Bracket w/ Decal, Black - Left Screw, Socket Head Cap w/ Patch (1/4-20 x 3/4") Block, Gear Hold Down Upper Bushing (1/4 x 1/2 x 7/16") Locknut (#10-24) Screw, Shoulder (1/4 x 1-1/4") Assembly, Dual Roller Right Assembly, Dual Roller Left A - Includes 2 each of items 16-18 25 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 6 1 1 7 1 1 14 1 1 1 1 4 4 2 2 2 1 1 1 1 1 1 1 1 1 1 4 2 4 4 4 1 1 Center Seat Frame Assembly Tilt/Recline (2GTR) 26 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com Center Seat Frame Assembly Tilt/Recline (2GTR) Item Number Note Quantity Per 1 2 2 3 4 5 6 7 8 9 10 11 12 13 Part Number 1086944 1082878 1082879 1026158 1031665 1082750 1012371 1086595 1065214 1086930 1082876 1025704 1079203 1091500 13 14 15 16 17 18 19 19 1091501 1098944 1095352 1091503 1026035 1000212 1095476 1095477 NOTE: A A Description Package Assembly Screw, Socket Head Cap (5/16-18 x 3/4") Bracket, Screw Support Acutator, Right Bracket, Screw Support Acturator, Left Locknut (5/16-18) Screw, Socket Head Shoulder (3/8 x 1-1/2") Actuator, Recline Washer, Nylon (3/8 x 7/8 x 1/16") Link, Tilt Washer, Flat (3/8 x 11/16 x 1/16") Ring, Retaining (3/8") Spacer (3/8 x 3/4 x 3/8") Washer, Flat (5/16 x 5/8 x 1/16") Decal, Warning Pinch Point Kit, Connecting Slide Bracket w/ Decal, Black Right Kit, Connecting Slide Bracket w/ Decal, Black - Left Screw, Socket Head Cap w/ Patch (1/4-20 x 3/4") Block, Gear Hold Down Upper Bushing (1/4 x 1/2 x 7/16") Locknut (#10-24) Screw, Shoulder (1/4 x 1-1/4") Assembly, Dual Roller Right Assembly, Dual Roller Left A - Includes 2 each of items 16-18 27 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com 1 1 1 1 1 1 1 1 1 1 1 1 1 1 6 1 1 7 1 1 8 2 4 4 2 2 2 1 1 1 1 1 1 1 1 1 1 4 2 4 4 4 1 1 Center Seat Frame Mounting Hardware 28 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com Center Seat Frame Mounting Hardware Item Number Note 1 2 3 4 5 Quantity Per Part Number 1026158 1031665 1070411 1098646 1098645 Description Package Assembly Locknut (5/16-18) Screw, Socket Head Shoulder (3/8 x 1-1/2") Bolt, Shoulder (3/8 x 2-1/2") Bushing, Black (7/16 x 1/2 x 11/16") Block, Black Tilt Angle 29 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com 1 1 1 1 1 4 4 2 2 2 Seat Pan Item #1 Seat Pan Chair Width 16" Wide 17" Wide 18" Wide 19" Wide 20" Wide 21" Wide 22" Wide 16" Deep 1090083 1090084 1090085 1090086 1090087 1090088 1090089 17" Deep 1066013 1066014 1066015 1066016 1066017 1066018 1066019 18" Deep 1066024 1066025 1066026 1066027 1066028 1066029 1066030 19" Deep 1066035 1066036 1066037 1066038 1066039 1066040 1066041 20" Deep 1066046 1066047 1066048 1066049 1066050 1066051 1066052 30 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com 21" Deep 1066057 1066058 1066059 1066060 1066061 1066062 1066063 22" Deep 1066068 1066069 1066070 1066071 1066072 1066073 1066074 Seat Pan Mounting Hardware 31 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com Seat Pan Mounting Hardware Item Number Note 1 2 3 4 5 6 7 NOTE: A Quantity Per Part Number 1092303 1030949 1037610 1026099 7930333 1047449 1026907 Description Package Assembly Hardware, Seat Pan Mounting Screw, Hex Head (1/4-20 x 1-1/2") Screw, Hex Head (1/4-20 x 1-5/8") Spacer, Coved (1/4 x 11/16 x 1/2") Locknut (1/4-20) Spacer (1/4 x 3/8 x 3/16") Washer (1/4 x 1/2 x 1/16") A - Includes Items 2-7 32 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com 1 1 1 1 25 1 1 1 4 1 1 5 4 1 Back Cane and Spreader Bar Assembly Tilt Only (2GT) NOTE: When changing back cane heights, new Back Assembly Mounting Hardware may be required. See Back Assembly Mounting Hardware page 33 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com Back Cane and Spreader Bar Assembly Tilt Only (2GT) NOTE: When changing back cane heights, new Back Assembly Mounting Hardware may be required. See Back Assembly Mounting Hardware page Item #1 Spreader Bar 16" Wide 1086101 17" Wide 1086102 18" Wide 1086103 19" Wide 1086104 20" Wide 1086105 21" Wide 1086106 22" Wide 1086107 Item #2 Back Canes Back Height Side Right Left Item Number Note 1 2 3 4 5 6 6 7 8 9 10 11 12 13 14 15 16 16 17 18 19 20-21" High 1086948 1086949 22-23" High 1086950 1086951 Quantity Per Part Number See Chart See Chart 1078214 1026907 1082699 1099540 1099541 1031673 1099527 1021851 1062604 1025704 1070398 1082725 1082724 1039860 1087014 1087015 1026158 40363X000 1082829 Description Package Assembly #1 Spreader Bar #2 Back Canes Screw, Hex Head Cap w/ Patch (1/4-20 x 1/2") Washer (1/4 x 1/2 x 1/16") T-Nut (1/4-20) Link, Curve Tilt, Right Link, Curved Tilt, Left Washer, Nylon (35/64 x 1 x 1/16") Screw, Socket Head Cap (3/8-16 x 3/4") Screw, Socket Head Shoulder (1/2 x 1-1/2") Screw, Shoulder Socket Head (3/8 x 1-1/4") Washer, Flat (5/16 x 5/8 x 1/16") Screw, Hex Head (5/16-18 x 1-1/2") Block, Slide Rod, Slide Screw, Hex Head Cap with Patch (5/16-18 x 3/4") Bracket, Connecting, Black - Right Bracket, Connecting, Black - Left Locknut (5/16-18) Hex Nut (3/8"-16) Cap, Back Cane End 34 Form No. 03-026 24-25" High 1086952 1086953 To order call toll free 1-800-333-6900, or www.invacare.com 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 4 4 4 1 1 2 2 2 2 6 2 2 2 2 1 1 4 4 2 Back Cane (7/8" Round-Optional) and Spreader Bar Assembly Tilt Only (2GT) 35 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com Back Cane (7/8" Round-Optional) and Spreader Bar Assembly Tilt Only (2GT) Item #1 Spreader Bar 16" Wide 0013602 17" Wide 0013702 18" Wide 0013802 19" Wide 0013902 20" Wide 0014002 21" Wide 0014102 22" Wide 0014202 Item #2 Back Cane with Grip Back Height Side Right Left Item Number Note 20-21" High 1103008 1103009 22-23" High 1104726 1104727 Quantity Per 1 2 3 4 Part Number See Chart See Chart 1086460 0190722 5 0190822 6 7 7 8 9 10 11 12 13 14 15 16 17 17 18 19 1007219 1099540 1099541 1031673 1099527 1021851 1062604 1025704 1070398 1082725 1082724 1039860 1087014 1087015 1026158 40363X000 Description Package Assembly #1 Spreader Bar #2 Back Canes Foam Hand Grip (4-1/2" Long) Half Clamp, Un-Threaded Holes (7/8" Dia. Back Canes) Half Clamp, Threaded Holes (7/8" Dia. Back Canes) Screw, Socket Head Cap (1/4-20 x 3/4") Link, Curve Tilt, Right Link, Curved Tilt, Left Washer, Nylon (35/64 x 1 x 1/16") Screw, Socket Head Cap (3/8-16 x 3/4") Screw, Socket Head Shoulder (1/2 x 1-1/2") Screw, Shoulder Socket Head (3/8 x 1-1/4") Washer, Flat (5/16 x 5/8 x 1/16") Screw, Hex Head (5/16-18 x 1-1/2") Block, Slide Rod, Slide Screw, Hex Head Cap with Patch (5/16-18 x 3/4") Bracket, Connecting, Black - Right Bracket, Connecting, Black - Left Locknut (5/16-18) Hex Nut (3/8"-16) 36 Form No. 03-026 24-25" High 1104728 1104729 To order call toll free 1-800-333-6900, or www.invacare.com 1 1 1 1 1 2 2 2 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 6 1 1 2 2 2 2 6 2 2 2 2 1 1 4 4 Back Cane (7/8" Round-Optional) and Spreader Bar Assembly Recline Only (2GR) and Tilt/Recline (2GTR) 37 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com Back Cane (7/8" Round-Optional) and Spreader Bar Assembly Recline Only (2GR) and Tilt/Recline (2GTR) Item #1 Spreader Bar 16" Wide 0013602 17" Wide 0013702 18" Wide 0013802 19" Wide 0013902 20" Wide 0014002 21" Wide 0014102 22" Wide 0014202 Item #2 Back Cane with Grip Back Height Side Right Left Item Number Note 20-21" High 1103008 1103009 22-23" High 1104726 1104727 24-25" High 1104728 1104729 Quantity Per 1 2 3 4 Part Number See Chart See Chart 1086460 0190722 5 0190822 6 7 8 9 10 11 12 13 14 15 16 17 18 1007219 1086587 1031673 1086323 1021851 1062604 1039860 1025704 1070398 1065214 40363X000 1026158 1082725 Description Package Assembly #1 Spreader Bar #2 Back Canes Foam Hand Grip (4-1/2" Long) Half Clamp, Un-Threaded Holes (7/8" Dia. Back Canes) Half Clamp, Threaded Holes (7/8" Dia. Back Canes) Screw, Socket Head Cap (1/4-20 x 3/4") Link, Curved Washer, Nylon (35/64 x 1 x 1/16") Screw, Socket Head Shoulder (1/2 x 5/8") Screw, Socket Head Shoulder (1/2 x 1-1/2") Screw, Shoulder Socket Head (3/8 x 1-1/4") Screw, Hex Head Cap with Patch (5/16-18 x 3/4") Washer, Flat (5/16 x 5/8 x 1/16") Screw, Hex Head (5/16-18 x 1-1/2") Washer, Flat (3/8 x 11/16 x 1/16") Hex Nut (3/8"-16) Locknut (5/16-18) Block, Slide 38 Form No. 03-026 26" High 1104730 1104731 To order call toll free 1-800-333-6900, or www.invacare.com 1 1 1 1 1 2 2 2 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 6 2 4 2 2 2 4 6 2 2 4 4 2 Back Cane and Spreader Bar Assembly Recline Only (2GR) and Tilt/ Recline (2GTR) NOTE: When changing back cane heights, new Back Assembly Mounting Hardware may be required. See Back Assembly Mounting Hardware page 39 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com Back Cane and Spreader Bar Assembly Recline Only (2GR) and Tilt/ Recline (2GTR) NOTE: When changing back cane heights, new Back Assembly Mounting Hardware may be required. See Back Assembly Mounting Hardware page Item #1 Spreader Bar 16" Wide 1086101 17" Wide 1086102 18" Wide 1086103 19" Wide 1086104 20" Wide 1086105 21" Wide 1086106 22" Wide 1086107 Item #2 Back Canes Back Height Side Right Left Item Number Note 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 NOTE: A 20-21" High 1086948 1086949 22-23" High 1086950 1086951 24-25" High 1086952 1086953 Quantity Per Part Number See Chart See Chart 1078214 1026907 1082699 1086587 1031673 1086323 1021851 1062604 1025704 1070398 1082725 1082724 1039860 1026158 40363X000 1065214 1082829 1087001 Description Package Assembly #1 Spreader Bar #2 Back Canes Screw, Hex Head Cap w/ Patch (1/4-20 x 1/2") Washer (1/4 x 1/2 x 1/16") T-Nut (1/4-20) Link, Curved Washer, Nylon (35/64 x 1 x 1/16") Screw, Socket Head Shoulder (1/2 x 5/8") Screw, Socket Head Shoulder (1/2 x 1-1/2") Screw, Shoulder Socket Head (3/8 x 1-1/4") Washer, Flat (5/16 x 5/8 x 1/16") Screw, Hex Head (5/16-18 x 1-1/2") Block, Slide Rod, Slide Screw, Hex Head Cap with Patch (5/16-18 x 3/4") Locknut (5/16-18) Hex Nut (3/8"-16) Washer, Flat (3/8 x 11/16 x 1/16") Cap, Back Cane End Kit, Back Cane and Spreader Bar Mounting Hardware A - Includes items 3-19 40 Form No. 03-026 26" High 1086954 1086955 To order call toll free 1-800-333-6900, or www.invacare.com 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 2 4 4 4 2 4 2 2 2 6 2 2 2 2 4 4 2 2 1 A.B.S. Curved Back without Mounting Hardware Tilt Only (2GT) NOTE: Overall back height is calculated by measuring from the seat pan surface to the top of the back pan. Back pan material height can be calculated by subtracting 3-3/4" from the overall back height listed. Material height listed is rounded off to the nearest whole number. NOTE: Hook Fastener Adhesive Kit must be ordered when a Back Pan or Back Assembly is requested. This will allow the Loop Fastener Adhesive on the Back Cover to attach properly. 41 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com A.B.S. Curved Back without Mounting Hardware Tilt Only (2GT) NOTE: Overall back height is calculated by measuring from the seat pan surface to the top of the back pan. Back pan material height can be calculated by subtracting 3-3/4" from the overall back height listed. Material height listed is rounded off to the nearest whole number. NOTE: Hook Fastener Adhesive Kit must be ordered when a Back Pan or Back Assembly is requested. This will allow the Loop Fastener Adhesive on the Back Cover to attach properly. 42 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com A.B.S. Curved Back without Mounting Hardware Tilt Only (2GT) NOTE: Overall back height is calculated by measuring from the seat pan surface to the top of the back pan. Back pan material height can be calculated by subtracting 3-3/4" from the overall back height listed. Material height listed is rounded off to the nearest whole number. NOTE: Hook Fastener Adhesive Kit must be ordered when a Back Pan or Back Assembly is requested. This will allow the Loop Fastener Adhesive on the Back Cover to attach properly. #1 Back Pan 16"-19" Wide Overall Back Height 20" 21" 22" 23" 24" 25" Material Back Height 16" 17" 18" 19" 20" 21" 16" Wide 17" Wide 18" Wide 19" Wide 1086049 1086056 1086063 1086070 1086077 1086084 1086050 1086057 1086064 1086071 1086078 1086085 1086051 1086058 1086065 1086072 1086079 1086086 1086052 1086059 1086066 1086073 1086080 1086087 #1 Back Pan 20"-22" Wide Overall Back Height 20" 21" 22" 23" 24" 25" Material Back Height 16" 17" 18" 19" 20" 21" 20" Wide 21" Wide 22" Wide 1086053 1086060 1086067 1086074 1086081 1086088 1086054 1086061 1086068 1086075 1086082 1086089 1086055 1086062 1086069 1086076 1086083 1086090 43 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com A.B.S. Curved Back without Mounting Hardware Tilt Only (2GT) NOTE: Overall back height is calculated by measuring from the seat pan surface to the top of the back pan. Back pan material height can be calculated by subtracting 3-3/4" from the overall back height listed. Material height listed is rounded off to the nearest whole number. NOTE: Hook Fastener Adhesive Kit must be ordered when a Back Pan or Back Assembly is requested. This will allow the Loop Fastener Adhesive on the Back Cover to attach properly. #2 Back Cushion Assembly 16"-19" Wide Overall Back Height 20" 21" 22" 23" 24" 25" Material Back Height 16" 17" 18" 19" 20" 21" 16" Wide 17" Wide 18" Wide 19" Wide 1097403 1097410 1097417 1097424 1097431 1097438 1097404 1097411 1097418 1097425 1097432 1097439 1097405 1097412 1097419 1097426 1097433 1097440 1097406 1097413 1097420 1097427 1097434 1097441 Back cover and foam are sold as a back cushion assembly only. #2 Back Cushion Assembly 20"-22" Wide Overall Back Height 20" 21" 22" 23" 24" 25" Material Back Height 16" 17" 18" 19" 20" 21" 20" Wide 21" Wide 22" Wide 1097407 1097414 1097421 1097428 1097435 1097442 1097408 1097415 1097422 1097429 1097436 1097443 1097409 1097416 1097423 1097430 1097437 1097444 44 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com A.B.S. Curved Back without Mounting Hardware Tilt Only (2GT) NOTE: Overall back height is calculated by measuring from the seat pan surface to the top of the back pan. Back pan material height can be calculated by subtracting 3-3/4" from the overall back height listed. Material height listed is rounded off to the nearest whole number. NOTE: Hook Fastener Adhesive Kit must be ordered when a Back Pan or Back Assembly is requested. This will allow the Loop Fastener Adhesive on the Back Cover to attach properly. #3 Back Assembly without Hardware 16"-19" Wide Overall Back Height 20" 21" 22" 23" 24" 25" Material Back Height 16" 17" 18" 19" 20" 21" 16" Wide 17" Wide 18" Wide 19" Wide 1090596 1090603 1090610 1090617 1090624 1090631 1090597 1090604 1090611 1090618 1090625 1090632 1090598 1090605 1090612 1090619 1090626 1090633 1090599 1090606 1090613 1090620 1090627 1090634 #3 Back Assembly without Hardware 20"-22" Wide Overall Back Height 20" 21" 22" 23" 24" 25" Material Back Height 16" 17" 18" 19" 20" 21" 20" Wide 21" Wide 22" Wide 1090600 1090607 1090614 1090621 1090628 1090635 1090601 1090608 1090615 1090622 1090629 1090636 1090602 1090609 1090616 1090623 1090630 1090637 45 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com A.B.S. Curved Back without Mounting Hardware Tilt Only (2GT) NOTE: Overall back height is calculated by measuring from the seat pan surface to the top of the back pan. Back pan material height can be calculated by subtracting 3-3/4" from the overall back height listed. Material height listed is rounded off to the nearest whole number. NOTE: Hook Fastener Adhesive Kit must be ordered when a Back Pan or Back Assembly is requested. This will allow the Loop Fastener Adhesive on the Back Cover to attach properly. Item Number Note 1 1 2 2 3 3 A NOTE: Quantity Per Part Number See Chart See Chart See Chart See Chart See Chart See Chart 1125723 Description Package Assembly #1 Back Pan 16"-19" Wide #1 Back Pan 20"-22" Wide #2 Back Cushion Assembly 16"-19" Wide #2 Back Cushion Assembly 20"-22" Wide #3 Back Assembly without Hardware 16"-19" Wide #3 Back Assembly without Hardware 20"-22" Wide Kit, Hook Fastener w/ Adhesive Back 1 1 1 1 1 1 1 A - Not Shown. Hook Fastener Adhesive Kit is used to attach the Back Cover to the Back Pan and must be ordered when a new Back Pan or Back Assembly is requested 46 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com 1 1 1 1 1 1 1 A.B.S. Curved Back without Mounting Hardware Recline Only (2GR) and Tilt/Recline (2GTR) with V.S.R. NOTE: Overall back height is calculated by measuring from the seat pan surface to the top of the back pan. Back pan material height can be calculated by subtracting 4-3/4" from the overall back height listed. Material height listed is rounded off to the nearest whole number. NOTE: Overall back height is calculated by measuring from the seat pan surface to the top of the back pan. Back pan material height can be calculated by subtracting 3-3/4" from the overall back height listed. Material height listed is rounded off to the nearest whole number. NOTE: Hook Fastener Adhesive Kit must be ordered when a Back Pan or Back Assembly is requested. This will allow the Loop Fastener Adhesive on the Back Cover to attach properly. 47 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com A.B.S. Curved Back without Mounting Hardware Recline Only (2GR) and Tilt/Recline (2GTR) with V.S.R. NOTE: Overall back height is calculated by measuring from the seat pan surface to the top of the back pan. Back pan material height can be calculated by subtracting 4-3/4" from the overall back height listed. Material height listed is rounded off to the nearest whole number. NOTE: Overall back height is calculated by measuring from the seat pan surface to the top of the back pan. Back pan material height can be calculated by subtracting 3-3/4" from the overall back height listed. Material height listed is rounded off to the nearest whole number. NOTE: Hook Fastener Adhesive Kit must be ordered when a Back Pan or Back Assembly is requested. This will allow the Loop Fastener Adhesive on the Back Cover to attach properly. 48 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com A.B.S. Curved Back without Mounting Hardware Recline Only (2GR) and Tilt/Recline (2GTR) with V.S.R. NOTE: Overall back height is calculated by measuring from the seat pan surface to the top of the back pan. Back pan material height can be calculated by subtracting 4-3/4" from the overall back height listed. Material height listed is rounded off to the nearest whole number. NOTE: Overall back height is calculated by measuring from the seat pan surface to the top of the back pan. Back pan material height can be calculated by subtracting 3-3/4" from the overall back height listed. Material height listed is rounded off to the nearest whole number. NOTE: Hook Fastener Adhesive Kit must be ordered when a Back Pan or Back Assembly is requested. This will allow the Loop Fastener Adhesive on the Back Cover to attach properly. #1 Back Pan 16"-19" Wide Overall Back Height 20" 21" 22" 23" 24" 25" 26" Material Back Height 15" 16" 17" 18" 19" 20" 21" 16" Wide 17" Wide 18" Wide 19" Wide 1086042 1086049 1086056 1086063 1086070 1086077 1086084 1086043 1086050 1086057 1086064 1086071 1086078 1086085 1086044 1086051 1086058 1086065 1086072 1086079 1086086 1086045 1086052 1086059 1086066 1086073 1086080 1086087 #1 Back Pan 20"-22" Wide Overall Back Height 20" 21" 22" 23" 24" 25" 26" Material Back Height 15" 16" 17" 18" 19" 20" 21" 20" Wide 21" Wide 22" Wide 1086046 1086053 1086060 1086067 1086074 1086081 1086088 1086047 1086054 1086061 1086068 1086075 1086082 1086089 1086048 1086055 1086062 1086069 1086076 1086083 1086090 49 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com A.B.S. Curved Back without Mounting Hardware Recline Only (2GR) and Tilt/Recline (2GTR) with V.S.R. NOTE: Overall back height is calculated by measuring from the seat pan surface to the top of the back pan. Back pan material height can be calculated by subtracting 4-3/4" from the overall back height listed. Material height listed is rounded off to the nearest whole number. NOTE: Overall back height is calculated by measuring from the seat pan surface to the top of the back pan. Back pan material height can be calculated by subtracting 3-3/4" from the overall back height listed. Material height listed is rounded off to the nearest whole number. NOTE: Hook Fastener Adhesive Kit must be ordered when a Back Pan or Back Assembly is requested. This will allow the Loop Fastener Adhesive on the Back Cover to attach properly. #2 Back Cushion Assembly 16"-19" Wide Overall Back Height 20" 21" 22" 23" 24" 25" 26" Material Back Height 15" 16" 17" 18" 19" 20" 21" 16" Wide 17" Wide 18" Wide 19" Wide 1097396 1097403 1097410 1097417 1097424 1097431 1097438 1097397 1097404 1097411 1097418 1097425 1097432 1097439 1097398 1097405 1097412 1097419 1097426 1097433 1097440 1097399 1097406 1097413 1097420 1097427 1097434 1097441 Back cover and foam are sold as a back cushion assembly only. #2 Back Cushion Assembly 20"-22" Wide Overall Back Height 20" 21" 22" 23" 24" 25" 26" Material Back Height 15" 16" 17" 18" 19" 20" 21" 20" Wide 21" Wide 22" Wide 1097400 1097407 1097414 1097421 1097428 1097435 1097442 1097401 1097408 1097415 1097422 1097429 1097436 1097443 1097402 1097409 1097416 1097423 1097430 1097437 1097444 50 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com A.B.S. Curved Back without Mounting Hardware Recline Only (2GR) and Tilt/Recline (2GTR) with V.S.R. NOTE: Overall back height is calculated by measuring from the seat pan surface to the top of the back pan. Back pan material height can be calculated by subtracting 4-3/4" from the overall back height listed. Material height listed is rounded off to the nearest whole number. NOTE: Overall back height is calculated by measuring from the seat pan surface to the top of the back pan. Back pan material height can be calculated by subtracting 3-3/4" from the overall back height listed. Material height listed is rounded off to the nearest whole number. NOTE: Hook Fastener Adhesive Kit must be ordered when a Back Pan or Back Assembly is requested. This will allow the Loop Fastener Adhesive on the Back Cover to attach properly. #3 Back Assembly without Hardware 16"-19" Wide Overall Back Height 20" 21" 22" 23" 24" 25" 26" Material Back Height 15" 16" 17" 18" 19" 20" 21" 16" Wide 17" Wide 18" Wide 19" Wide 1090589 1090596 1090603 1090610 1090617 1090624 1090631 1090590 1090597 1090604 1090611 1090618 1090625 1090632 1090591 1090598 1090605 1090612 1090619 1090626 1090633 1090592 1090599 1090606 1090613 1090620 1090627 1090634 #3 Back Assembly without Hardware 20"-22" Wide Overall Back Height 20" 21" 22" 23" 24" 25" 26" Material Back Height 15" 16" 17" 18" 19" 20" 21" 20" Wide 21" Wide 22" Wide 1090593 1090600 1090607 1090614 1090621 1090628 1090635 1090594 1090601 1090608 1090615 1090622 1090629 1090636 1090595 1090602 1090609 1090616 1090623 1090630 1090637 51 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com A.B.S. Curved Back without Mounting Hardware Recline Only (2GR) and Tilt/Recline (2GTR) with V.S.R. NOTE: Overall back height is calculated by measuring from the seat pan surface to the top of the back pan. Back pan material height can be calculated by subtracting 4-3/4" from the overall back height listed. Material height listed is rounded off to the nearest whole number. NOTE: Overall back height is calculated by measuring from the seat pan surface to the top of the back pan. Back pan material height can be calculated by subtracting 3-3/4" from the overall back height listed. Material height listed is rounded off to the nearest whole number. NOTE: Hook Fastener Adhesive Kit must be ordered when a Back Pan or Back Assembly is requested. This will allow the Loop Fastener Adhesive on the Back Cover to attach properly. Item Number Note 1 1 2 2 3 3 A NOTE: Quantity Per Part Number See Chart See Chart See Chart See Chart See Chart See Chart 1125723 Description Package Assembly #1 Back Pan 16"-19" Wide #1 Back Pan 20"-22" Wide #2 Back Cushion Assembly 16"-19" Wide #2 Back Cushion Assembly 20"-22" Wide #3 Back Assembly without Hardware 16"-19" Wide #3 Back Assembly without Hardware 20"-22" Wide Kit, Hook Fastener w/ Adhesive Back 1 1 1 1 1 1 1 A - Not Shown. Hook Fastener Adhesive Kit is used to attach the Back Cover to the Back Pan and must be ordered when a new Back Pan or Back Assembly is requested. 52 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com 1 1 1 1 1 1 1 Profile Back without Mounting Hardware NOTE: See back mounting hardware under accessories when attaching a profile back to 7/8" round canes. 53 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com Profile Back without Mounting Hardware NOTE: See back mounting hardware under accessories when attaching a profile back to 7/8" round canes. Back Material Width x Height Overall Back Height - Tilt Overall Back Height - VSR Item #1 Back Cover 16" x 16" 17" x 16" 18" x 16" 19" x 16" 20" x 16" 21" x 16" 16" x 18" 17" x 18" 18" x 18" 19" x 18" 20" x 18" 21" x 18" 23" 23" 23" 23" 23" 23" 24" 24" 24" 24" 24" 24" 25" 25" 25" 25" 25" 25" 26" 26" 26" 26" 26" 26" 0276800-NLA 0276800-NLA 0276900-NLA 0276900-NLA 0277000 0277000 0277100 0277100 0277200 0277200 0277300 0277300 54 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com Item #2 Back Assembly w/o Sliding Hardware 1091877 1091877 1091876 1091876 1091878 1091878 1091875 1091875 1091874 1091874 1091873 1091873 Back Assembly Mounting Hardware A.B.S. Curved and Profile NOTE: Items 1, 2 and attaching hardware may be required when changing back styles or back cane heights. NOTE: See back mounting hardware under accessories when attaching a profile back to 7/8" round canes. 55 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com Back Assembly Mounting Hardware A.B.S. Curved and Profile NOTE: Items 1, 2 and attaching hardware may be required when changing back styles or back cane heights. NOTE: See back mounting hardware under accessories when attaching a profile back to 7/8" round canes. Item #1 Back Slide Block (Tilt Only A.B.S. Curved) Seating System Back Type Tilt Only Curved 20" Back Height 1082916 21"-22" Back Height 1082917 23"-24" Back Height 1082918 25" Back Height 1082919 Item #1 Back Slide Block Profile 20"-21" Back Height 1082915 22"-23" Back Height 1082915 24"-25" Back Height 1082915 26" Back Height 1082915 Curved 1082915 1082916 1082917 1082918 Profile 1082915 1082915 1082915 1082915 Seating System Back Type Tilt Only Recline Only and Tilt/Recline w/VSR Recline Only and Tilt/Recline w/VSR Item #2 Back Slide Sleeve (Tilt Only A.B.S. Curved) Seating System Back Type Tilt Only Curved 20" Back Height 1082944 21"-22" Back Height 1082945 23"-24" Back Height 1082946 56 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com 25" Back Height 1082947 Back Assembly Mounting Hardware A.B.S. Curved and Profile NOTE: Items 1, 2 and attaching hardware may be required when changing back styles or back cane heights. NOTE: See back mounting hardware under accessories when attaching a profile back to 7/8" round canes. Item #2 Back Slide Sleeve Profile 20"-21" Back Height 1082943 22"-23" Back Height 1082943 24"-25" Back Height 1082943 26" Back Height 1082943 Curved 1082943 1082944 1082945 1082946 Profile 1082943 1082943 1082943 1082943 Seating System Back Type Tilt Only Recline Only and Tilt/Recline w/ VSR Recline Only and Tilt/Recline w/ VSR Item Number Note 1 1 2 2 3 4 5 6 6 Part Number See Chart See Chart See Chart See Chart 1026907 1000212 1091870 B F 1008432 1091870 A,C A,D 1090131 1086994 1086996 A,E 1086995 7 NOTE: Quantity Per Description Package Assembly #1 Back Slide Block (Tilt Only A.B.S. Curved) #1 Back Slide Block #2 Back Slide Sleeve (Tilt Only A.B.S. Curved) #2 Back Slide Sleeve Washer (1/4 x 1/2 x 1/16") Screw, Shoulder (1/4 x 1-1/4") Screw, Socket Button Head w/ Patch (1/4-20 x 3/4") Screw, Socket Button Head (1/4-20 x 1-1/4") Screw, Socket Button Head w/ Patch (1/4-20 x 3/4") Spacer, Black (1/4 x 3/4 x 5/8") Hardware, Attaching, A.B.S. Curved Back Hardware, Attaching, Profile Back (17",19",21" Wide) Hardware, Attaching, Profile Back (16",18",20",22" Wide) A - Not Shown B - 17",19" and 21" Wide C - Includes Items 3-5 D - Includes Items 3,4,6 and 7 E - Includes Items 3,4 and 6 F - 16",18", 20" and 22" Wide 57 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com 1 1 1 1 1 1 1 2 2 2 2 2 2 4 1 1 4 4 1 1 1 4 1 1 1 1 A.B.S. Curved Back Mounting Hardware For (7/8" Round) Back Canes 58 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com A.B.S. Curved Back Mounting Hardware For (7/8" Round) Back Canes Item Number Note 6 1 2 3 4 A Quantity Per Part Number 1106395 5 NOTE: Description Package Assembly Kit, Back, A.B.S. Curved Mounting Hardware Screw, Socket Flat C'sunk Head (1/4-20 x 1-1/4") Hook, Back Assembly Mounting Locknut (1/4-20) Screw, Phillips Oval Head Countersunk (#10-16 x 7/8") Spacer, Back Pan A - Includes items 1-5 59 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com 1 1 1 1 1 1 4 4 4 2 1 4 Back Assembly V.S.R. Actuator Motor and Mounting Hardware Recline Only (2GR) and Tilt/Recline (2GTR) 60 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com Back Assembly V.S.R. Actuator Motor and Mounting Hardware Recline Only (2GR) and Tilt/Recline (2GTR) Item Number Note Quantity Per 1 A Part Number 1121051 1 B 1121052 2 3 4 5 6 6 7 8 C C 7930323 7930326 1121023 1026907 0001100 1113627 1008495 1091869 NOTE: D E Description Package Assembly V.S.R. Actuator Mounting Hardware, A.B.S. Curved Back V.S.R. Actuator Mounting Hardware, Profile Back Package, Locknut (1/4-20) Screw, Hex Head (1/4-20 x 3/4") Bracket, V.S.R. Actuator Mounting Washer (1/4 x 1/2 x 1/16") Actuator Assembly, 5" Stroke Actuator Assembly, 3" Stroke Screw, Socket Button Head (1/4-20 x 1-1/2") Screw, Socket Flat Head C'sunk with Patch (1/4-20 x 3/4") A - Includes Items 2-5, 7 and 8 B - Includes Items 2-5 and 7 C - Profile Backs Use Quantity of 3 Only D - For Profile backs E - For A.B.S. curved backs 61 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com 1 1 1 1 25 25 1 1 1 1 1 1 5 1 1 2 1 1 1 2 Armrest Assembly Tilt Only (2GT) 62 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com Armrest Assembly Tilt Only (2GT) Item Number Note Quantity Per 1 Part Number 1082910 1 1082911 1 1090190 1 1082912 1 1082913 1 1090191 2 1071253 2 1070859 3 4 5 6 7 8 9 10 11 12 13 1027095 1107155 1064130 47471X074 1028594 1032244 1090768 1028645 1065936 1067734 1068416 13 1068417 13 1068418 13 1068419 13 1067761 13 1067762 13 1067755 13 1067756 14 15 16 1068039 1030949 1068025 Description Package Assembly Arm Pad w/ Elbow Stop, Desk, Black Urethane (13" L x 3" W) - Right Arm Pad w/ Elbow Stop, Desk, Black Urethane (13" L x 3" W) - Left Arm Pad w/ Elbow Stop, Desk, Black Urethane (13" L x 3" W) - Pair w/ Screws Arm Pad w/ Elbow Stop, Full, Black Urethane (17" L x 3" W) - Right Arm Pad w/ Elbow Stop, Full, Black Urethane (17" L x 3" W) - Left Arm Pad w/ Elbow Stop, Full, Black Urethane (17" L x 3" W) -Pair w/ Screws Arm Top, Adjustable Height with Plug Buttons - Full Length (Black) Arm Tube, Upper with Plug Buttons (Black) - Desk Length Plug Button, Black (7/8") Screw, Phillips Pan Head Tap (#10-32 x 1-1/4") Clothing Guard Spring, Arm Lock Pin, Arm Lock Grip, Foam Hand (9" Long) Kit, Lock Handle w/Rivets (both LT & RT side) Rivet Plug, Pivot Plug Button, Black (5/8") Arm Base, Adjustable Height 16-19" Deep - Right (Black) Arm Base, Adjustable Height 16-19" Deep - Left (Black) Arm Base, Adjustable Height 20" and Deeper - Right (Black) Arm Base, Adjustable Height 20" and Deeper - Left (Black) Arm Base, 1" Lower, Adjustable Height 16-19" Deep - Right (Black) Arm Base, 1" Lower, Adjustable Height 16-19" Deep - Left (Black) Arm Base, 1" Lower, Adjustable Height 20" and Deeper - Right (Black) Arm Base, 1" Lower, Adjustable Height 20" and Deeper - Left (Black) Pin, Pull Screw, Hex Head (1/4-20 x 1-1/2") Clevis, Pivot 63 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com 1 1 1 1 2 1 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 2 2 1 1 1 1 1 6 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Armrest Assembly Tilt Only (2GT) Item Number Note 17 18 19 Quantity Per Part Number 7930323 1068488 1035065 Description Package Assembly Package, Locknut (1/4-20) Kit, Swingaway Armrest Mounting Hardware Cover, Clothing Guard with Pocket - For Fixed Height Desk Length & Adjustable Height Full/Desk Length 64 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com 25 1 1 1 1 1 Armrest Assembly Recline Only (2GR) and Tilt/Recline (2GTR) 65 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com Armrest Assembly Recline Only (2GR) and Tilt/Recline (2GTR) Item Number Note Quantity Per 1 Part Number 1082910 1 1082911 1 1090190 1 1082912 1 1082913 1 1090191 2 2 2 2 3 4 5 6 7 8 8 9 10 11 12 13 14 15 16 17 18 19 20 A,G A,G B,G B,G D E H C F 1086992 1086993 1087012 1087013 1008432 1026103 0028202 1027095 1107155 1028755 1107155 1079203 1115392 1115393 1082842 7930333 1082927 1009838 1095437 1086990 1082699 1086932 1078214 1119268 Description Package Assembly Arm Pad w/ Elbow Stop, Desk, Black Urethane (13" L x 3" W) - Right Arm Pad w/ Elbow Stop, Desk, Black Urethane (13" L x 3" W) - Left Arm Pad w/ Elbow Stop, Desk, Black Urethane (13" L x 3" W) - Pair w/ Screws Arm Pad w/ Elbow Stop, Full, Black Urethane (17" L x 3" W) - Right Arm Pad w/ Elbow Stop, Full, Black Urethane (17" L x 3" W) - Left Arm Pad w/ Elbow Stop, Full, Black Urethane (17" L x 3" W) -Pair w/ Screws Arm Assembly w/o Arm Pad, Desk Length - Right Arm Assembly w/o Arm Pad, Desk Length - Left Arm Assembly w/o Arm Pad, Full Length - Right Arm Assembly w/o Arm Pad, Full Length - Left Screw, Socket Button Head (1/4-20 x 1-1/4") Washer, Nylon (1/4 x 1/2 x 1/32") Extension Tube, Full Length Plug Button, Black (7/8") Screw, Phillips Pan Head Tap (#10-32 x 1-1/4") Screw, Phillips Pan Head (#10-32 x 5/8") Screw, Phillips Pan Head Tap (#10-32 x 1-1/4") Decal, Warning Pinch Point Support Tube w/ Warning Decal, Arm Slide Tube, Adjustable Plug, Arm, Black Locknut (1/4-20) Arm Tube Screw, Socket Head (1/4-20 x 3/4") Arm Pivot Assembly Hardware, Arm Attaching T-Nut (1/4-20) Pivot, Back Arm Screw, Hex Head Cap w/ Patch (1/4-20 x 1/2") Slide Tube/Arm Support Assembly (Pair) 66 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com 1 1 1 1 2 1 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 25 1 1 1 1 1 1 1 2 1 1 1 1 3 4 1 1 2 1 1 1 1 1 1 3 1 1 1 1 2 1 2 1 Armrest Assembly Recline Only (2GR) and Tilt/Recline (2GTR) NOTE: A - Includes Items 3,4,6, and 9-16 B - Includes Items 3-6 and 8-16 C - Includes Items 18-20 D - Used for full length arms only E - Used for desk length arms only F - Not Shown. Assembly includes 2 ea. of item numbers 9, 10 and 11 G - When placing an order for item 2, you must specify as a note "For Tarsys 2GTR seating" or "For Formula TRE seating" because item 16 Arm Pivot Assembly Pin faces down for the Tarsys 2GTR and faces up for the Formula TRE powered seating. H - The Arm Pivot Assembly Pin faces down for the Tarsys 2GTR and faces up for the Formula TRE powered seating 67 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com Shroud Covers Rear, Side, Lower Seat and V.S.R. Actuator 68 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com Shroud Covers Rear, Side, Lower Seat and V.S.R. Actuator Item Number Note 1 2 3 4 5 6 6 6 6 6 6 7 8 8 8 9 9 9 9 9 10 NOTE: C A B A B Quantity Per Part Number 1115839 1104253 1028484 1115818 1025729 1115832 1115833 1115834 1115835 1115836 1115837 1117234 1087033 1087034 1087032 1113623 1115843 1115842 1115841 1115840 1079203 Description Package Assembly Shroud Cover, V.S.R. Actuator Cable Tie, 8" Long Screw, Phillips Pan Head Tap (#10-32 x 1/2") Shroud Cover, Rear Screw, Self Tapping Pan Head (#8-32 x 3/8") Shroud Cover Assembly with Decal, 2GT Right Shroud Cover Assembly with Decal, 2GT Left Shroud Cover Assembly with Decal, 2GR Right Shroud Cover Assembly with Decal, 2GR Left Shroud Cover Assembly with Decal, 2GTR Right Shroud Cover Assembly with Decal, 2GTR Left Shroud Cover, Lower Seat Decal, Side Shroud Cover, Tilt Only Decal, Side Shroud Cover, Recline Only Decal, Side Shroud Cover, Tilt/ Recline Shroud Assembly with Hardware, 2GT Shroud Assembly with Hardware, 2GR w/o V.S.R. Shroud Assembly with Hardware, 2GR with V.S.R. Shroud Assembly with Hardware, 2GTR w/o V.S.R. Shroud Assembly with Hardware, 2GTR with V.S.R. Decal, Warning Pinch Point 1 10 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 A - Includes items 3-8 B - Includes items 1-8 C - When TRBKTS option is used and a replacement Rear Shroud Cover is required, item 10 Pinch Point Decal must be ordered as well 69 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com 1 2 1 1 4 1 1 1 1 1 1 1 2 2 2 1 1 1 1 1 2 Front Riggings Reference Chart For AT5544, 70NHD, PHW93 NOTE: Calf pads with attaching hardware is not included on legrest. NOTE: Pivot/ Slide tube attaching hardware is not included. NOTE: Pivot/Slide tube and footplates do not include heel loops. See footrest and legrest accessories. 1651 = Composite footplate with 9-7/8" curved pivot/ slide tube. AT5543 = Adjustable angle footplate with 9-7/8" straight pivot/ slide tube. 1350 = Extra large footplate with "L" style pivot/ slide tube. Support Assemblies - AT5544, 70NHD, PHW93 Rigging Type AT5544 8881045291 Right See Note(s) B, A See Note(s) A 8881045292 Left NOTE: AT5544P 1087050 See Note(s) B 1087051 70NHD PHW93 8881053149 8881126089 See Note(s) A See Note(s) A 8881053148 8881126090 See Note(s) A See Note(s) B See Note(s) A A - Specify frame color when ordering, see page titled "Frame Finishes and Touch-Up Paints". B - 1651 Composite footplates are not available for AT5544P support assemblies See Note(s) A Pivot/ Slide Tube and Footplates For AT5544, 70NHD, PHW93 Footplate Type Right Left Right 2" Longer Left 2" Longer Right 4" Longer Left 4" Longer 1651 16" W 1057869 1057870 1057871 1057872 1058421 1058422 1651 17-22" W 1057879 1057880 1057881 1057882 1058423 1058424 1350 17-22" W 1026395 1026396 1086515 1086517 1086516 1086518 70 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com AT5543 16-22" W 1062756 1062757 1062760 1062761 1121140 1121141 Front Riggings Reference Chart For PHAL4A NOTE: Calf pads with attaching hardware is not included on legrest. NOTE: Pivot/Slide tube attaching hardware is not included. NOTE: Pivot/Slide tube and footplates do not include heel loops. See footrest and legrest accessories. 1650 = Aluminum footplate with "L" style pivot/slide tube. 1350 = Extra large footplate with "L" style pivot/slide tube. Support Assembly - PHAL4A Rigging Type Right Left PHAL4A (Chrome Only) 1114761 1114762 Pivot/Slide Tube and Footplates For PHAL4A Footplate Type Right Left 1650 16-22" W 1023907 1023908 71 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com 1350 17-22" W 1035456 1035457 Front Riggings Reference Chart 70ST TAPER NOTE: Pivot/Slide tube attaching hardware is not included. NOTE: Pivot/Slide tube and footplates do not include heel loops. See footrest and legrest accessories. 1651 = Composite footplate with 9-7/8" curved pivot/slide tube. Support Assemblies - 70ST TAPER Rigging Type 70ST TAPER 8881026996 Right See Note(s) A 8881026997 Left NOTE: See Note(s) A A - Specify frame color when ordering, see page titled "Frame Finishes and Touch-Up Paints". Pivot/Slide Tube and Footplates For 70ST TAPER Footplate Type Right Left Right 2" Longer Left 2" Longer 1651 16-17" W 1057859 1057860 1651 18-19" W 1057869 1057870 1651 20-22" W 1057879 1057880 1057861 1057871 1057881 1057862 1057872 1057882 72 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com Front Rigging Hanger Assembly Pin, Sector and Genius Style NOTE: Front rigging hangers and seat pans share the same mounting hardware, see Seat Pan and Mounting Hardware page. 73 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com Front Rigging Hanger Assembly Pin, Sector and Genius Style NOTE: Front rigging hangers and seat pans share the same mounting hardware, see Seat Pan and Mounting Hardware page. 74 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com Front Rigging Hanger Assembly Pin, Sector and Genius Style NOTE: Front rigging hangers and seat pans share the same mounting hardware, see Seat Pan and Mounting Hardware page. Item Number Note Quantity Per 1 A Part Number 1114766 1 A 1114767 1 A 1132339 1 A 1132340 2 3 B 1027097 1068435 3 B 1068436 3 B 1068437 3 B 1068438 4 4 5 6 7 C C D 1054571 1054572 1026907 1052957 1087076 7 D 1087077 7 D 1087078 7 D 1087079 8 NOTE: 0181000 Description Package Assembly Front Rigging Hanger Pin Style with Plug Button (Hemi) (12-21" Deep) - Right Front Rigging Hanger Pin Style with Plug Button (Hemi) (12-21" Deep) - Left Front Rigging Hanger Pin Style with Plug Button (Hemi) 22" Deep - Right Front Rigging Hanger Pin Style with Plug Button (Hemi) 22" Deep - Left Plug Button, Black (3/4") Front Rigging Hanger Assembly, Sector Style (12-21" Deep) - Right Front Rigging Hanger Assembly, Sector Style (12-21" Deep) - Left Front Rigging Hanger Assembly, Sector Style (22" Deep) - Right Front Rigging Hanger Assembly, Sector Style (22" Deep) - Left Kit, Sector Block - Right Kit, Sector Block - Left Washer (1/4 x 1/2 x 1/16") Screw, Hex Head (1/4-20 x 2") Front Rigging Hanger Assembly, Genius Style with Nylon Liner - Short (16"-21" Deep), Right Front Rigging Hanger Assembly, Genius Style with Nylon Liner - Short (16"-21" Deep), Left, Front Rigging Hanger Assembly, Genius Style with Nylon Liner - Long (22" Deep), Right Front Rigging Hanger Assembly, Genius Style with Nylon Liner - Long (22" Deep), Left Liner, Nylon (3/4") A - Includes front rigging hanger and item 2 B - Includes front rigging hanger and item 4 C - Includes sector block assembly and items 5 and 6 D - Includes front rigging hanger and item 8 75 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Footrest Support Assemblies Sector Style 76 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com Footrest Support Assemblies Sector Style Item Number Note Quantity Per 1 A,C Part Number 8881053149 1 A,C 8881053148 1 A,D 8881026996 1 A,D 8881026997 2 3 4 5 6 7 8 8 9 10 11 12 13 14 15 16 B E NOTE: 7930321 1029501 1017148 7930333 1025451 7930314 1025454 1025455 1026124 1045267 1026099 1020534 1070759 7930338 1026703 1057846 1026987 Description Package Assembly Footrest Support Assembly, 70° Non-Tapered Heavy Duty, Sector, Color - Right Footrest Support Assembly, 70° Non-Tapered Heavy Duty, Sector, Color - Left Footrest Support Assembly, 70° Tapered, Sector, Color - Right Footrest Support Assembly, 70° Tapered, Sector, Color - Left Screw, Socket Button Head (1/4-20 x 1-7/8") Plug Button, Black (1") Plug, Pivot Locknut (1/4-20) Screw, Slotted Hex Washer Head (#10-32 x 5/8") Screw, Slotted Hex Head (#10-32 x 1/2") Latch Housing - Right Latch Housing - Left Anti-Rattle Collar Screw, Hex Head (1/4-20 x 3/4") Spacer, Coved (1/4 x 11/16 x 1/2") Insert, Threaded Screw, Hex Head (1/4-20 x 1-1/2") Nut, Acorn (1/4-20) Kit, Pivot/Slide Tube Mounting Hardware (Pair) Kit, Pivot/Slide Tube Mounting Hardware (Pair) Impact Guard, 8" Long A - Specify frame color when ordering. See page titled "Frame Finishes and Touch-Up Paints." B - Item 16 takes quantity of 4 C - See Image "A" D - See Image "B" E - Not Shown 77 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com 1 1 1 1 1 1 1 1 25 1 1 25 1 25 1 1 1 1 1 1 1 25 2 2 1 1 1 1 1 2 1 1 1 1 1 2 1 1 1 1 1 1 PHW93 (Hemi) Footrest Supports Color (Pin Style) 78 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com PHW93 (Hemi) Footrest Supports Color (Pin Style) Item Number Note 1 2 3 4 5 6 6 7 8 8 9 10 11 12 13 14 15 A A B B NOTE: Quantity Per Part Number 1020719 1025716 47565X057 1025735 1026114 1114749 1114750 1028846 1028707 1028708 1006490 15680X012 1070759 1026099 1044214 1020534 1074143 8881126089 8881126090 Description Package Assembly Anti-Rattle, Black Screw, Phillips Pan Head (#10-32 x 11/16") Bushing (7/32 x 3/8 x 11/32") Locknut (#10-32) Screw, Phillips Pan Head (#10-32 x 1/2") Release Handle (Black) - Right Release Handle (Black) - Left Rivnut (#10-32) Spring, Release - Right Spring, Release - Left Tip, Plastic, Black Collar, Anti-Rattle (7/8") Screw, Hex Head (1/4-20 x 1-1/2") Spacer, Coved (1/4 x 11/16 x 1/2") Nut, Hex with Nylon Cap (1/4-20) Insert, Threaded Kit, Slide Tube Mounting Hardware Footrest Support Assembly, Hemi, Color - Right Footrest Support Assembly, Hemi, Color - Left A - Includes items 2-4 B - Specify frame color when ordering, see page titled "Frame Finishes and Touch-Up Paints". 79 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 1 PHAL4A (Hemi) Articulating Legrest Supports Chrome 16"-22" Wide Chairs (Pin Style) 80 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com PHAL4A (Hemi) Articulating Legrest Supports Chrome 16"-22" Wide Chairs (Pin Style) Item Number Note 1 2 3 3 4 5 6 7 7 8 9 10 10 11 12 13 14 15 16 17 18 19 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 38 C C D D Quantity Per Part Number 1030979 1022874 1114751 1114752 47565X057 60279X003 40163X008 1008935 1008936 67005X000 40163X002 1114759 1114760 1027097 1006490 1040060 1037126 1049527 1022866 40363X000 1022846 1022877 1022878 1022854 10261X000 04528X002 1040831 47328X003 42326X004 1037485 1037125 1013519 1024911 1014807 48823X008 47328X003 1025133 04526X019 60264X001 1025104 11232X009 1022848 1022849 Description Package Assembly Screw, Phillips Pan Head Tap (#10-32 x 3/4") Bumper Release Handle (Chrome) - Right Release Handle (Chrome) - Left Bushing (7/32 x 3/8 x 11/32") Locknut (#10-32) Screw, Phillips Pan Head (#10-32 x 11/16") Spring, Release - Right Spring, Release - Left Rivnut (#10-32) Screw, Phillips Round Head (#10-32 x 1/2") Tube, Legrest Support (Chrome) Hemi - Right Tube, Legrest Support (Chrome) Hemi - Left Plug Button, Black (3/4") Tip, Plastic, Black Tip, Black Plastic Handle, Release Washer, Nylon (3/8 x 3/4 x 1/16") Screw, Socket Button Head (3/8-16 x 3/4") Hex Nut (3/8"-16) Bar, Link, Chrome Tube Support and Drive Link - Right Tube Support and Drive Link - Left Screw, Slotted Head Shoulder (1/2 x 1-1/8") Acorn Nut (5/16"-24) Bracket, Release (Chrome) Snap Ring Bushing, Pivot (5/16 x 7/16 x 7/8") Bar, Ratchet - Right/Left Spring, Release Cam, Legrest Washer, Nylon (5/16 x 11/16 x 1/16") Decal, Smartleg Screw, Hex Head (5/16-24 x 3-1/4") Spring, Leaf Bushing, Pivot (5/16 x 7/16 x 7/8") Spacer, Legrest Pad Plate, Legrest Pad Locknut (5/16-24) Bracket, Legrest, Chrome Screw, Lug (5/16-24 x 1-3/8") Slide Tube, Articulating (Chrome) - Right Slide Tube, Articulating (Chrome) - Left 81 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 3 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 PHAL4A (Hemi) Articulating Legrest Supports Chrome 16"-22" Wide Chairs (Pin Style) Item Number Note 39 40 41 42 NOTE: Quantity Per B Part Number 1027377 1107321 8881091764 1068649 1114761 B 1114762 A Description Package Assembly Washer (#20) Nut, Low Cap (5/16"-24) Pad, Legrest Vinyl - Right/Left Screws, Phillips Head (#10-32 x 11/16") Legrest Support Assembly, Articulating, Hemi, Chrome - Right Legrest Support Assembly, Articulating, Hemi, Chrome - Left A - Specify upholstery color U67 black when ordering. B - Not Shown C - Includes items 4-6 D - Includes items 1-9 82 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com 1 1 1 2 1 1 1 1 1 1 1 1 AT5544 Legrest Supports (Sector Style) 16"-22" Wide Chairs 83 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com AT5544 Legrest Supports (Sector Style) 16"-22" Wide Chairs Item Number Note 1 2 3 4 5 6 7 8 8 8 8 9 10 11 12 12 13 14 15 16 17 18 19 19 20 21 22 23 24 25 26 NOTE: A A A A B C A,C A,C Quantity Per Part Number 1017187 1028529 40363X000 1058636 11919X000 7930330 1026030 1043556 1043557 8881048851 8881048852 1032266 04528X002 1025451 1025454 1025455 7930314 42326X001 7930336 1017148 1029501 7930301 8881045289 8881045290 1040831 7930310 1040060 1037485 1037125 1037126 1096974 1096943 8881045291 8881045292 Description Package Assembly Cover, Top Screw, Phillips Pan Head (#8-32 x 3/8") Hex Nut (3/8"-16) Washer, Nylon (25/64 x 7/8 x 1/32") Screw, Truss Head (3/8-16 x 1-1/2") Locknut (5/16-24) Screw, Lug (5/16-24 x 1-3/8") Tube, Elevating Support (Black) - Right Tube, Elevating Support (Black) - Left Tube, Elevating Support (Color) - Right Tube, Elevating Support (Color) - Left Bracket, Legrest Pad Mounting, Black Bracket, Release (Chrome) Screw, Slotted Hex Washer Head (#10-32 x 5/8") Latch Housing - Right Latch Housing - Left Screw, Slotted Hex Head (#10-32 x 1/2") Bar, Ratchet Nut, Acorn (5/16-24) Plug, Pivot Plug Button, Black (1") Package, Button Head Cap Screws (1/4-20 x 1-3/4") Bracket, Legrest Support, Color - Right Bracket, Legrest Support, Color - Left Snap Ring Washer, Nylon (5/16 x 11/16 x 1/16") Tip, Black Plastic Spring, Release Cam, Legrest Handle, Release Kit, Ratchet Elevating Legrest Instruction Sheet, Ratchet Kit Legrest Support Assembly, Sector, Color - Right Legrest Support Assembly, Sector, Color - Left A - Specify frame color when ordering. See page titled "Frame Finishes and Touch-Up Paints". B - Includes items 10, 14, 15 and 20-25 C - Not Shown 84 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com 1 1 1 1 1 25 1 1 1 1 1 1 1 1 1 1 25 1 25 1 1 25 1 1 1 25 1 1 1 1 2 1 1 1 1 2 1 2 1 3 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 AT5544P Legrest Supports (Mechanical) (Sector Style) 16"-22" Wide Chairs 85 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com AT5544P Legrest Supports (Mechanical) (Sector Style) 16"-22" Wide Chairs Item Number Note 1 1 2 2 3 4 5 6 7 8 9 9 10 11 11 12 13 14 15 16 17 18 19 20 20 21 22 23 24 25 26 26 26 27 28 29 NOTE: A A B B Quantity Per Part Number 1087050 1087051 1094266 1094267 7930301 1029501 1017148 7930333 7930314 1025451 1025454 1025455 1026158 1094268 1094269 1026030 1025730 1082908 11919X000 40363X000 1058636 1025729 1017187 1092666 1092667 1025133 1032267 1037110 1028514 1032266 8881091759 8881091764 01415X000-NLA 1066591 04526X019 1107321 Description Package Assembly Legrest Support Assembly, Sector, Black - Right Legrest Support Assembly, Sector, Black - Left Support, Black Legrest, Right Support, Black Legrest, Left Package, Button Head Cap Screws (1/4-20 x 1-3/4") Plug Button, Black (1") Plug, Pivot Locknut (1/4-20) Screw, Slotted Hex Head (#10-32 x 1/2") Screw, Slotted Hex Washer Head (#10-32 x 5/8") Latch Housing - Right Latch Housing - Left Locknut (5/16-18) Tube, Elevating Support (Black) Right Tube, Elevating Support (Black) Left Screw, Lug (5/16-24 x 1-3/8") Locknut (5/16-24) Spacer, Coved (5/16 x 29/32 x 7/16") Screw, Truss Head (3/8-16 x 1-1/2") Hex Nut (3/8"-16) Washer, Nylon (25/64 x 7/8 x 1/32") Screw, Self Tapping Pan Head (#8-32 x 3/8") Cover, Top Rod, Legrest Elevating, Right Rod, Legrest Elevating, Left Spacer, Legrest Pad Spacer, Legrest Pad Mounting Screw, Hex Head (5/16-24 x 3-1/2") Screw, Hex Head (5/16-24 x 1-1/2") Bracket, Legrest Pad Mounting, Black Pad w/Cover and Screws, Legrest Vinyl (Pair) Pad, Legrest Vinyl - Right/Left Cover, Legrest Pad Screws, Phillips Head (#10-32 x 11/16") Plate, Legrest Pad Nut, Low Cap (5/16"-24) A - Includes Items 2-25 and 29 B - Specify U67 black upholstery when ordering 86 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com 1 1 1 1 25 1 1 25 25 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 2 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 1 1 2 2 1 1 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Genius Legrest (Mechanical) 87 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com Genius Legrest (Mechanical) Right, Left and Pair Assembly Part Numbers For Genius Legrest Description Legrest Tube Length Width Range Right Assembly Left Assembly Legrest Pair Standard Footplate 18" 16"-22" Wide 0196600 0196500 0138100 X-Large Footplate Standard Footplate X-Large Footplate 18" 16"-22" Wide 1072595 1072594 1072904 20" 16"-22" Wide 0264000 0263900 0263800 20" 16"-22" Wide 1072597 1072596 1072905 88 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com Genius Legrest (Mechanical) Item Number Note 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 41 42 A Quantity Per Part Number 1023966 0060000 0140406 0061400 0289824 1096649 0176700 0050100 0051606 0052906 0177802 1086987 0179202 7930323 7930333 0223506 0180506 0054700 0177702 0182406 1028486 0175600 0055206 1072692 1025704 0176422 0055006 0176200 0177100 0178224 0175800 0224600 1105474 1068159 1068160 1025716 04526X019 1068161 1109613 8881091811 0238124 0232424 0177022 Description Package Assembly Screw, Socket Head (#10-32 x 1-3/4") Rubber Bumper Screw, Socket Head Cap (5/16-18 x 1-1/2) Decal, Warning Label Tie Down Legrest Hanger Receptical w/ Dowel Pin Guide Square w/ Brass Barb Insert Bushing, Coved Latch Legrest Genius Washer, Nylon Flat (1/4 x 1/2 x 1/16") Screw, Socket Head Cap (1/4-20 x 1") Screw, Socket Button Head (1/4-20 x 3/4") Link, Rear Plate, Push Pin Link Plate Package, Locknut (1/4-20) Locknut (1/4-20) Screw, Socket Head (1/4-20 x 1/2") Screw, Support Bushing Washer, Nylon (5/16 x 1/2 x 1/16") Link, Front Push Pin Locknut, Low Profile (3/8-16) Spacer, Coved (5/16 x 3/4 x 3/8") Screw, Socket Head (5/16-18 x 1-3/4") Lockwasher, Split (5/16") Washer, Flat (5/16 x 5/8 x 1/16") Spacer, Coved Locknut, Low Profile (5/16-18) Bushing, Nylon Guide Bushing, Legrest Support Bar, Insert, Black Bushing, Guide Screw, Socket Head Cap (#10-32 x 3/4") Screw, Hex Head (5/16-18 x 3-1/2) Clamp, Calf Pad Block, Legrest Pad Mount Screw, Phillips Pan Head (#10-32 x 11/16") Plate, Legrest Pad Block, Mounting Hardware, Calf Pad Calf Pad (Left or Right) Tube, Legrest 18" Tube, Legrest 20" Half Clamp 89 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com 1 1 1 1 1 1 1 1 1 1 1 1 1 25 25 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 10 2 3 1 1 1 4 1 1 1 2 1 1 1 2 1 1 1 2 2 2 1 1 1 1 1 1 1 2 1 1 1 1 1 1 2 Genius Legrest (Mechanical) Item Number Note Quantity Per 43 44 45 46 47 48 49 49 50 50 51 51 52 B C B C B C B Part Number 0177602 1024793 1096664 0177222 1027097 0194906 0176022 0186000 0179824 0288824 1036120 1036123 1043659 52 B 1043660 52 44200X025 52 44200X026 D NOTE: See Chart Description Package Assembly Plate, Adjustment Screw, Hex Head (1/4-20 x 1-3/4") Plug Button, Black (1") Pivot, Footplate Plug Button, Black (3/4") Screw, Phillips Pan Head Tap (#8 x 1/2") Spacer Spacer, Wheel Tube, Footplate Tube, Footplate Spring Spring, Leaf Footplate, Aluminum - Deluxe (8" W x 5-3/4" L) Right Footplate, Aluminum - Deluxe (8" W x 5-3/4" L) Left Footplate, Aluminum - Extra Large (8" W x 8-1/2" L) - Right Footplate, Aluminum - Extra Large (8" W x 8-1/2" L) - Left Genuis Legrest Assembly A - Includes Items 27 and 33-38 (Per Side) B - Standard Footplate with Rubber Edge C - X-Large Footplate D - Not Shown 90 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com 1 1 1 1 1 1 1 1 1 1 1 1 1 2 3 1 1 1 1 2 2 1 1 2 2 1 1 1 1 1 1 1 1 1 Legrest Support Push Rod Assembly AT5544P and Genius 91 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com Legrest Support Push Rod Assembly AT5544P and Genius Item Number Note Quantity Per 1 Part Number 1086966 1 1086967 1 1086968 1 1086969 2 3 4 5 6 7 8 8 9 10 1047449 1091871 1086958 1082922 1007219 1056098 1086962 1086963 7930323 1013971 Description Package Assembly Push Rod Assembly, Legrest Support (16"-19" Deep), Right Push Rod Assembly, Legrest Support (16"-19" Deep), Left Push Rod Assembly, Legrest Support (20"-22" Deep), Right Push Rod Assembly, Legrest Support (20"-22" Deep), Left Spacer (1/4 x 3/8 x 3/16") Screw, Socket Head Cap (#8-32 x 5/8") Tube, Adjustable Slide Receptacle, Legrest Screw, Socket Head Cap (1/4-20 x 3/4") Locknut (#8-32) Push Rod, Legrest Support (16"-19" Deep) Push Rod, Legrest Support (20"-22" Deep) Package, Locknut (1/4-20) Washer, Nylon (1/4 x 7/16 x 5/64") 92 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 25 1 1 1 1 1 1 1 1 1 1 1 Calf Pads and Mounting Hardware NOTE: For replacement calf pads for Power Articulating Legrest, see Power Articulating Legrest page. 93 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com Calf Pads and Mounting Hardware NOTE: For replacement calf pads for Power Articulating Legrest, see Power Articulating Legrest page. Item Number Note 1 1 2 3 4 5 6 7 8 9 10 11 12 13 NOTE: A A Quantity Per Part Number 8881091759 8881091764 04526X019 7930330 1025133 1032267 1037110 1028514 1066591 48823X008 7930363 1025104 1014807 1032266 Description Package Assembly Pad w/Cover and Screws, Legrest Vinyl (Pair) Pad, Legrest Vinyl - Right/Left Plate, Legrest Pad Locknut (5/16-24) Spacer, Legrest Pad Spacer, Legrest Pad Mounting Screw, Hex Head (5/16-24 x 3-1/2") Screw, Hex Head (5/16-24 x 1-1/2") Screws, Phillips Head (#10-32 x 11/16") Spring, Leaf Package, Locknut (5/16"-24) Bracket, Legrest, Chrome Screw, Hex Head (5/16-24 x 3-1/4") Bracket, Legrest Pad Mounting, Black A - Specify upholstery color. See page titled "Frame Finishes, Touch-Up Paints and Upholstery Options". 94 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com 2 1 1 25 1 1 1 1 2 1 25 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 Pivot/Slide Tube and 1651 Composite Footplates NOTE: Heel Loops are not included. See Footrest and Legrest Accessories. NOTE: For complete pivot/slide tube and footplate assemblies, see Front Riggings Reference Charts 95 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com Pivot/Slide Tube and 1651 Composite Footplates NOTE: Heel Loops are not included. See Footrest and Legrest Accessories. NOTE: For complete pivot/slide tube and footplate assemblies, see Front Riggings Reference Charts Item Number Note 1 1 1 2 3 4 5 6 6 6 6 6 NOTE: A B C D E Quantity Per Part Number 1057852 1057854 1058418 1025457 1027097 7930323 7930366 1026880 1026881 1026879 1026880 1026881 Description Package Assembly Pivot/Slide Tube, Curved End (9-7/8") (Steel) Pivot/Slide Tube, Curved End 2" Longer (Steel) Pivot/Slide Tube, Curved End 4" Longer (Steel) Spacer, Coved (1/4 x 3/4 x 11/32") Plug Button, Black (3/4") Package, Locknut (1/4-20) Screw, Socket Head Cap (1/4-20 x 2-1/4") Footplate, Composite - Medium (7" W x 6" L) Footplate, Composite - Large (8" W x 6" L) Footplate, Composite - Small (6" W x 6" L) Footplate, Composite - Medium (7" W x 6" L) Footplate, Composite - Large (8" W x 6" L) A - 16" Wide B - 17" and Wider C - 16"-17" Wide Tapered D - 18"-19" Wide Tapered E - 20" and Wider Tapered 96 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com 1 1 1 1 1 25 25 1 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1 Pivot/Slide Tube and 1650, 1350 Aluminum Footplates NOTE: Heel Loops are not included. See Footrest and Legrest Accessories NOTE: For complete pivot/slide tube and footplate assemblies, see Front Riggings Reference Charts. Item Number Note 1 2 2 2 2 2 3 3 A A A B C 3 4 4 5 5 6 7 NOTE: Quantity Per Part Number 1027097 1048834 1098906 1086482 1041526 1041526 44200X027 44200X025 44200X026 D E D E 1016346 1027095 1006981 1036123 7930354 1070168 Description Package Assembly Plug Button, Black (3/4") Pivot/Slide Tube with Plug Button Pivot/Slide Tube with Plug Button - 2" Longer Pivot/Slide Tube with Plug Button - 4" Longer Pivot/Slide Tube with Plug Button (Steel) Pivot/Slide Tube with Plug Button (Steel) Footplate, Aluminum - Medium (7-3/4" W x 6" L) Footplate, Aluminum - Extra Large (8" W x 8-1/2" L) - Right Footplate, Aluminum - Extra Large (8" W x 8-1/2" L) - Left Cap, Tube End (7/8") Plug Button, Black (7/8") Spring, Leaf Spring, Leaf Package, Phillips Head Screw (#8-32 x 3/8") Push Plug, Footplate A - Extra Large footplate for AT5544, 70, PHW93, B - Extra Large footplate for PHAL4A C - Standard Aluminum footplate for PHAL4 D - For Standard Aluminum footplate E - For Extra Large footplate 97 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 25 1 1 1 2 1 2 1 AT5543 Adjustable Angle Footplates 70 deg, PHW93, AT5544, AT5544P Swingaway Supports NOTE: Heel loops are not included. See Footrest and Legrest Accessories. 98 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com AT5543 Adjustable Angle Footplates 70 deg, PHW93, AT5544, AT5544P Swingaway Supports NOTE: Heel loops are not included. See Footrest and Legrest Accessories. Item Number Note Quantity Per 1 Part Number 1062569 2 3 4 5 6 7 8 8 9 10 11 11 11 12 13 14 1029545 1058517 1082686 7930333 1026907 1048816 1052102 1052103 7930321 1026900 1057855 1057856 1121135 7930313 1025457 See Chart Description Package Assembly Footplate, Adjustable Angle - X-Large (6-1/4" W x 8" L) Screw, Socket Head Cap (1/4-20 x 3/4") Clamp, Footplate Nut, Hex Head (1/4-20 x 11/16") Locknut (1/4-20) Washer (1/4 x 1/2 x 1/16") Screw, Nylon Adjustment (1/2-13 x 7/8") Hinge, Footplate - Right Hinge, Footplate - Left Screw, Socket Button Head (1/4-20 x 1-7/8") Washer (1/4 x 23/32 x 1/16") Pivot/Slide Tube, Straight (9-7/8" Long - Steel) Pivot/Slide Tube, Straight (11-7/8" Long - Steel) Pivot/Slide Tube, Straight (13-7/8" Long - Steel) Washer, Nylon (5/16 x 7/8 x 1/8") Spacer, Coved (1/4 x 3/4 x 11/32") #14 Pivot/Slide Tubes with Footplates 1 1 1 1 1 25 1 1 1 1 25 1 1 1 1 25 1 1 2 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 Item #14 Pivot Slide Tube with Footplate Assemblies Rigging Type Side 70, PHW93, AT5544, AT5544P Right Left 16" and Wider X- Large Footplate 1062756 1062757 Right 1062760 Left 1062761 Right 1121140 Left 1121141 70, PHW93, AT5544, AT5544P 2" Longer Slide Tube 70, PHW93, AT5544, AT5544P 4" Longer Slide Tube 99 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com Footrest and Legrest Accessories NOTE: Heel loop replacements for Power Articulating Legrest are found on the Power Articulating Legrest page. Heel Loop w/ Heel Loop w/ Heel Loop w/ Ankle Strap Ankle Strap Ankle Strap Single # Rt. Single # Lt. Pair # Attaching Hardware Pair # Footplate Type Chair Width Heel Loop Single # Heel Loop Pair # Composite Small (1651) 16-17" W Tapered 1028412 1035912 1035908 1035909 1035906 1035931 1017621 1035917 1035919 1035920 1035918 1035931 1017621 1035917 1035932 1035933 1035930 1035931 16-22" W 1017621 1035917 1035919 1035920 1035918 1035907 16-22" W 1017621 1035917 1035919 1035920 1035918 1055241 Composite Medium (1651) Composite Large (1651) Standard Aluminum (1650) X-Large Aluminum (1350) 16" W or 18-19" W Tapered 17-22" W or 20-22" W Tapered Attaching Hardware Part Numbers (Less AT5543) Footplate Type Part Number Composite (1651) 1035931 Standard Aluminum (1650) 1035907 X-Large Aluminum (1350) 1055241 Part Number Consists of 2 each Screw, PPH (1/4-20 x 2-1/4") 2 each Spacer (1/4 x 11/32 x 1-3/4") 2 each Locknut (1/4-20) 2 each Screw, PPH (1/4-20 x 2-1/2") 2 each Spacer (1/4 x 11/32 x 1-3/4") 2 each Locknut (1/4-20) 2 each Screw, PPH (1/4-20 x 2-1/4") 2 each Spacer (1/4 x 11/32 x 1-3/4") 2 each Locknut (1/4-20) 100 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com Footrest and Legrest Accessories NOTE: Heel loop replacements for Power Articulating Legrest are found on the Power Articulating Legrest page. Heel Loops/Heel Loops w/ Ankle Straps and Hardware (For AT5543) Footplate Type Part Number AT5543 Adj. Angle 1038245 Heel Loops w/ Hardware Adjustable Angle Footplate (Pair) AT5543 Adj. Angle 1038246 Heel Loops w/ Ankle Straps & Hardware Adjustable Angle Footplate (Pair) Part Number Consists of 2 each Heel Loops 4 each Screw, SHC (10-32 x 1-1/2") 4 each Spacer (1/4 x 5/16 x 1-3/32") 4 each Washer (3/16 x 7/16 x 1/16") 2 each Heel Loops w/ Ankle Straps 4 each Screw, SHC (10-32 x 1-1/2") 4 each Spacer (1/4 x 5/16 x 1-3/32") 4 each Washer (3/16 x 7/16 x 1/16") Toe Loops (1345) and Attaching Hardware Footplate Type Toe Loop w/o Hardware Single # Toe Loop w/o Hardware Pair # Attaching Hardware Part Number 1651, 1650, 1350, Footplates 04572X025 1037087 1037089 AT5543 Footplates 04572X025 1037087 1104749 101 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com Attaching Hardware Consists of 4 each Screw, PPH (10-32 x 7/8") 4 each Washer (1/4 x 3/4 x 3/32") 4 each Locknut (10-32) 4 each Screw, PPH (10-32 x 1/2") 4 each Washer (1/4 x 3/4 x 3/32") Footrest and Legrest Accessories NOTE: Heel loop replacements for Power Articulating Legrest are found on the Power Articulating Legrest page. Item Number Note NOTE: Quantity Per A A,B A,C A A A A Part Number 1032243 1032215 1032216 1026987 See Chart See Chart See Chart A See Chart Description Package Assembly Calf Strap w/ Hook and Loop (36" Long) H-Strap, 26" Long H-Strap, 31" Long Impact Guard, 8" Long Attaching Hardware Part Numbers Heel Loops and Hardware (Less AT5543) Heel Loops/Heel Loops w/ Ankle Straps and Hardware AT5543 Toe Loops and Hardware A - Not Shown B - 16" Wide C - 17"-22" Wide 102 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 1 Front Rigging - Center Mount Riggings (CTMT-T/CTMT-TL) (CTMT-T = 12-1/4" - 16-1/2" Range) & (CTMT-TL = 17-1/4" - 21-3/4" Range) 103 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com Front Rigging - Center Mount Riggings (CTMT-T/CTMT-TL) (CTMT-T = 12-1/4" - 16-1/2" Range) & (CTMT-TL = 17-1/4" - 21-3/4" Range) Item Number Note Quantity Per 1 A Part Number 1117260 1 A 1117261 2 1120347 3 4 5 6 7 8 9 B 1110669 1113376 1113373 1113372 1117238 1021344 1123038 9 B 1123039 9 B 1123040 9 B 1123041 10 1123046 10 1123047 11 12 13 14 15 16 D 1021421 1006477 1078214 1121996 1025195 1113606 16 D 1113607 17 C 1120345 17 C 1121123 18 19 19 20 21 22 23 24 25 1021343 1113384 1113385 1047449 1065362 1096810 1108122 1113530 1021343 Description Package Assembly Center Mount Rigging, 2GTR (12-1/4" - 16-1/2" Range) Center Mount Rigging, 2GTR (17-1/4" - 21-3/4" Range) Legrest Support Assembly, Center Mount Rigging, 2GTR Bearing, Flanged (1/2 x 13/16 x 1/2") Ring, Retainer (1/4 x 1/2 x 1/64") Pin, Angle Adjustable A.S.B.A. Rack, Center Mount Rigging Angle Adjustable Support, 2GTR Legrest Center Mount Screw, Socket Head Cap (5/16-18 x 1-1/2") Extension Tube and Footplate Assembly with Heel Loop, Short Right Extension Tube and Footplate Assembly with Heel Loop, Short Left Extension Tube and Footplate Assembly with Heel Loop, Long Right Extension Tube and Footplate Assembly with Heel Loop, Long Left Extension Tube, Footrest Short (12-1/4" - 16-1/2" Range) Extension Tube, Footrest Long (17-1/4" - 21-3/4" Range) Screw, Phillips Pan Head (1/4-20 x 2-1/4") Spacer (1/4 x 11/32 x 1-3/4") Screw, Hex Head Cap w/ Patch (1/4-20 x 1/2") Heel Loop, Center Mount Rigging Locknut (1/4-20) Footplate, Center Mount Rigging - Right (5-1/4" W x 9-5/8" L) Footplate, Center Mount Rigging - Left (5-1/4" W x 9-5/8" L) Center Mount Rigging Footplate Mounting Hardware - Right Center Mount Rigging Footplate Mounting Hardware - Left Screw, Socket Head Cap (5/16-18 x 1-1/4") Hinge, Adjustable Angle - Right Hinge, Adjustable Angle - Left Spacer (1/4 x 3/8 x 3/16") Locknut (1/4-28) Screw, Socket Head (1/4-28 x 1-3/4") Locknut (5/16-18) Hinge Attachment Screw, Socket Head Cap (5/16-18 x 1-1/4") 104 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 1 1 1 4 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 1 2 1 1 Front Rigging - Center Mount Riggings (CTMT-T/CTMT-TL) (CTMT-T = 12-1/4" - 16-1/2" Range) & (CTMT-TL = 17-1/4" - 21-3/4" Range) NOTE: A - Includes items 2, 8 & 9 B - Includes items 16, 17 & 10-14 C - Includes items 18-25 D - Item #16 - Footplate design revised 2/28/07 to accommodate items 18 & 23. Replace footplates in pairs and order new footplate hardware for chairs mfg. before 2/28/07. 105 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com Center Mount Rigging Mounting Hardware (CTMT-T/CTMT-TL) 106 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com Center Mount Rigging Mounting Hardware (CTMT-T/CTMT-TL) Item Number Note 1 2 3 4 5 6 7 8 9 10 11 12 13 14 NOTE: Quantity Per A Part Number 1117264 B 1121079 Description Package Assembly Kit, Center Mount Rigging Mounting Hardware Cable/Brake Assembly Nut, Square (#10-32) Spacer (5/16 x 3/16 x 3/4") Pin, Quick Release (5" Long) Screw, Socket Head (#10-32 x 1-1/4") Cable Tie (11-1/2" Long) Screw, Socket Head Shoulder (5/16 x 1-5/8") Screw, Phillips Pan Head (#10-32 x 11/16") Washer, Lock (3/16 x 5/16 x 1/16") Locknut (1/4-20) Housing, Ratchet Bearing, Glide Cable/Brake Assembly with Ratchet Housing and Glide Bearing A - Includes items 2-13 B - Includes items 2, 9, 10, 12 and 13 107 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 2 2 1 1 2 1 Center Mount Rigging KIT (CTMT-T/CTMT-TL) 108 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com Center Mount Rigging KIT (CTMT-T/CTMT-TL) Item Number Note Quantity Per 1 A Part Number 1121011 1 B 1121012 2 3 4 5 6 7 1095502 1028513 1113236 1086207 1113375 1121079 8 9 10 1071736 1025736 1117260 10 1117261 C NOTE: 1118368 Description Package Assembly Kit, Adjustable Length Center Mount Rigging 2GTR Short (12-1/4" - 16-1/2") Kit, Adjustable Length Center Mount Rigging 2GTR Long (17-1/4" - 21-3/4") Package, Cable Ties (11-1/2") Screw, Socket Head (#10-32 x 1-1/4") Spacer (5/16 x 3/16 x 3/4") Nut, Square (#10-32) Pin, Quick Release (5" Long) Cable/Brake Assembly with Ratchet Housing and Glide Bearing Screw, Socket Head Shoulder (5/16 x 1-5/8") Locknut (1/4-20) Center Mount Rigging, 2GTR (12-1/4" - 16-1/2" Range) Center Mount Rigging, 2GTR (17-1/4" - 21-3/4" Range) Instruction Sheet, Center Mount Rigging Kit A - Compatible with 16"-17" and 20"-21" seat depths B - Compatible with 18"-19" and 22" seat depths C - Instruction Sheet is Not Shown. 109 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com 1 1 1 1 10 1 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Power Articulating Legrest ELRPW/ELRPW22 Before 7/27/04 110 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com Power Articulating Legrest ELRPW/ELRPW22 Before 7/27/04 Item Number Note 1 1 2 2 3 4 5 6 7 A A Quantity Per Part Number 1111720 1111721 1025454 1025455 1017423 1025451 1079203 1099685 1091870 8 8 9 10 11 12 13 14 15 16 16 17 18 1110968 1110969 1025351 1025736 1025704 1099671 1026907 1012371 1110745 1110746 1110747 1009837 1091870 19 20 21 22 23 24 25 26 27 28 28 29 29 30 30 1101883 0175600 1110741 1099702 1018846 1110972 1082699 1100023 1087417 1110724 1110725 8881110977 8881111715 88804529X003 88804529X004 1110748 1026033 1099700 1026114 1025765 B C C D,F 31 32 33 34 Description Package Assembly Legrest Support Assembly, Sector, Black - Right Legrest Support Assembly, Sector, Black - Left Latch Housing - Right Latch Housing - Left Screw, Slotted Hex Washer Head (#10-32 x 1/2") Screw, Slotted Hex Washer Head (#10-32 x 5/8") Decal, Warning Pinch Point Plug, Pivot Screw, Socket Button Head w/ Patch (1/4-20 x 3/4") Cushion Pad -Right Cushion Pad -Left Screw, Socket Head Shoulder (5/16 x 1-1/4") Locknut (1/4-20) Washer, Flat (5/16 x 5/8 x 1/16") Bearing, Flange (1/4 x 5/16" Long) Washer (1/4 x 1/2 x 1/16") Washer, Nylon (3/8 x 7/8 x 1/16") Plate, Pivot Cover, Legrest Support - Right Cover, Legrest Support - Left Screw, Socket Button Head (1/4-20 x 1") Screw, Socket Button Head w/ Patch (1/4-20 x 3/4") Glide Spacer, Coved (5/16 x 3/4 x 3/8") Extrusion, Internal Slide (14-1/4" Long) Glide, Internal Screw, Socket Button Head (#10-24 x 3/4") Actuator Bracket Assembly T-Nut (1/4-20) Screw, Button Head w/Patch (1/4-20 x 1/2") Screw, Socket Head Shoulder (5/16 x 1") Motor, Actuator - Right Motor, Actuator - Left Calf Pad Assembly with Mounting Hardware - Right Calf Pad Assembly with Mounting Hardware - Left Pad, Legrest Vinyl - Right Pad, Legrest Vinyl - Left Hardware, Calf Pad Bracket Washer, Nylon (1/4 x 1/2 x 1/16") Bracket, Calf Pad Mounting, Black Screw, Phillips Pan Head (#10-32 x 1/2") Locknut (1/4-28) 111 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 5 2 2 12 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 3 2 1 1 1 1 11 10 1 1 1 1 1 1 1 1 4 1 2 1 Power Articulating Legrest ELRPW/ELRPW22 Before 7/27/04 Item Number Note 35 36 37 37 38 39 40 41 41 42 42 43 44 45 46 46 47 E E Quantity Per Part Number 1074191 1099690 1111716 1111717 1078214 1110742 1079151 1110734 1121026 1101114 1101115 1023965 1028516 1015629 1101268 1101269 1060427 48 49 50 51 51 52 53 54 55 G 1029545 1008495 1082686 1052102 1052103 1048816 1016301 1099678 1110743-NLA 55 G 1110744-NLA 55 G 1121027-NLA 55 G 1121028-NLA NOTE: Description Package Assembly Screw, Socket Countersunk Head (1/4-28 x 1/2") Block, Calf Pad Bracket, Calf Pad Mounting, Black - Right Bracket, Calf Pad Mounting, Black - Left Screw, Hex Head Cap w/ Patch (1/4-20 x 1/2") Bushing, Sleeve Pin, Roll (5/64 x 5/8") Extrusion, External (10-1/2" Long) ELRPW Extrusion, External (12-1/2" Long) (ELRPW22 Before 7/22/04) and (ELRPW20 After 7/21/04) Footplate Assembly - Right Footplate Assembly - Left Screw, Socket Head Cap (#10-32 x 1-1/2") Washer (3/16 x 7/16 x 1/16") Bushing Heel Loop Assembly - Right Heel Loop Assembly - Left Footplate, Adjustable Angle - Large (5-1/4" W x 8" L) Screw, Socket Head Cap (1/4-20 x 3/4") Screw, Socket Button Head (1/4-20 x 1-1/2") Nut, Hex Head (1/4-20 x 11/16") Hinge, Footplate - Right Hinge, Footplate - Left Screw, Nylon Adjustment (1/2-13 x 7/8") Washer, Nylon (5/16 x 7/8 x 1/8") Extrusion, Footplate Adapter Legrest Assembly, Power Articulating, Sector, Black (13"-20" Range) - Right Legrest Assembly, Power Articulating, Sector, Black (13"-20" Range) - Left Legrest Assembly, Power Articulating, Sector, Black (15"-22" Range) - Right Legrest Assembly, Power Articulating, Sector, Black (15"-22" Range) - Left 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 1 1 1 1 1 1 1 1 1 1 1 1 2 1 2 1 1 1 2 1 1 1 1 1 1 1 1 A - Includes items 2-8 B - Includes items 13, 25 and 26 C - Includes Items 25, 26 and 30-38 D - Includes Items 25, 26, 31-36, 38 E - Includes Items 10, 13, 25, 26 and 43-54 F - Not Shown G - Due to a product enhancement that provides a higher pivot point at the knee, a customer must order a complete right and left side legrest assembly. See page titled "Power Articulating Legrest After 7/26/04". 112 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com Power Articulating Legrest ELRPW/ELRPW22 After 7/26/04 113 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com Power Articulating Legrest ELRPW/ELRPW22 After 7/26/04 Item Number Note 1 1 2 2 3 4 5 6 7 A A Quantity Per Part Number 1125436 1125437 1025454 1025455 1017423 1025451 1079203 1099685 1091870 8 8 9 10 11 12 13 14 15 16 16 17 18 1125433 1125434 1025351 1025736 1025704 1099671 1026907 1012371 1125424 1110746 1110747 1009837 1091870 19 20 21 22 23 24 25 26 27 28 28 29 29 30 30 1101883 0175600 1110741 1099702 1018846 1110972 1082699 1100023 1087417 1110724 1110725 8881110977 8881111715 88804529X003 88804529X004 1110748 1026033 1099700 1026114 1025765 B C C D,F 31 32 33 34 Description Package Assembly Legrest Support Assembly, Sector, Black - Right Legrest Support Assembly, Sector, Black - Left Latch Housing - Right Latch Housing - Left Screw, Slotted Hex Washer Head (#10-32 x 1/2") Screw, Slotted Hex Washer Head (#10-32 x 5/8") Decal, Warning Pinch Point Plug, Pivot Screw, Socket Button Head w/ Patch (1/4-20 x 3/4") Cushion Pad - Right Cushion Pad - Left Screw, Socket Head Shoulder (5/16 x 1-1/4") Locknut (1/4-20) Washer, Flat (5/16 x 5/8 x 1/16") Bearing, Flange (1/4 x 5/16" Long) Washer (1/4 x 1/2 x 1/16") Washer, Nylon (3/8 x 7/8 x 1/16") Plate, Pivot Cover, Legrest Support - Right Cover, Legrest Support - Left Screw, Socket Button Head (1/4-20 x 1") Screw, Socket Button Head w/ Patch (1/4-20 x 3/4") Glide Spacer, Coved (5/16 x 3/4 x 3/8") Extrusion, Internal Slide (14-1/4" Long) Glide, Internal Screw, Socket Button Head (#10-24 x 3/4") Actuator Bracket Assembly T-Nut (1/4-20) Screw, Button Head w/Patch (1/4-20 x 1/2") Screw, Socket Head Shoulder (5/16 x 1") Motor, Actuator - Right Motor, Actuator - Left Calf Pad Assembly with Mounting Hardware - Right Calf Pad Assembly with Mounting Hardware - Left Pad, Legrest Vinyl - Right Pad, Legrest Vinyl - Left Hardware, Calf Pad Bracket Washer, Nylon (1/4 x 1/2 x 1/16") Bracket, Calf Pad Mounting, Black Screw, Phillips Pan Head (#10-32 x 1/2") Locknut (1/4-28) 114 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 5 1 2 12 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 1 1 1 1 11 10 1 1 1 1 1 1 1 1 4 1 2 1 Power Articulating Legrest ELRPW/ELRPW22 After 7/26/04 Item Number Note Quantity Per 35 36 37 37 38 39 40 41 Part Number 1074191 1099690 1111716 1111717 1078214 1110742 1079151 1121026 41 42 42 43 44 45 46 46 47 1125435 1101114 1101115 1023965 1028516 1015629 1101268 1101269 1060427 E E 48 49 50 51 51 52 53 54 55 1029545 1008495 1082686 1052102 1052103 1048816 1016301 1099678 1126091 55 1126092 55 1126093 55 1126094 NOTE: Description Package Assembly Screw, Socket Countersunk Head (1/4-28 x 1/2") Block, Calf Pad Bracket, Calf Pad Mounting, Black - Right Bracket, Calf Pad Mounting, Black - Left Screw, Hex Head Cap w/ Patch (1/4-20 x 1/2") Bushing, Sleeve Pin, Roll (5/64 x 5/8") Extrusion, External (12-1/2" Long) (ELRPW22 Before 7/22/04) and (ELRPW20 After 7/21/04) Extrusion, External (14-1/2" Long) ELRPW22 Footplate Assembly - Right Footplate Assembly - Left Screw, Socket Head Cap (#10-32 x 1-1/2") Washer (3/16 x 7/16 x 1/16") Bushing Heel Loop Assembly - Right Heel Loop Assembly - Left Footplate, Adjustable Angle - Large (5-1/4" W x 8" L) Screw, Socket Head Cap (1/4-20 x 3/4") Screw, Socket Button Head (1/4-20 x 1-1/2") Nut, Hex Head (1/4-20 x 11/16") Hinge, Footplate - Right Hinge, Footplate - Left Screw, Nylon Adjustment (1/2-13 x 7/8") Washer, Nylon (5/16 x 7/8 x 1/8") Extrusion, Footplate Adapter Legrest Assembly, Power Articulating, Sector, Black (13"-20" Range) - Right Legrest Assembly, Power Articulating, Sector, Black (13"-20" Range) - Left Legrest Assembly, Power Articulating, Sector, Black (15"-22" Range) - Right Legrest Assembly, Power Articulating, Sector, Black (15"-22" Range) - Left A - Includes items 2-7 B - Includes items 13, 25 and 26 C - Includes Items 25, 26 and 30-38 D - Includes Items 25, 26, 31-36, 38 E - Includes Items 10, 13, 25, 26 and 43-54 F - Not Shown 115 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 1 1 1 1 1 1 1 1 1 1 1 1 2 1 2 1 1 1 2 1 1 1 1 1 1 1 1 Power Articulating Legrest Harnesses and Hardware ELRPW 116 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com Power Articulating Legrest Harnesses and Hardware ELRPW Item Number Note 1 1 2 3 4 5 6 7 8 9 10 NOTE: A Quantity Per Part Number 1101400 1101401 1003424 1018692 1056098 1102022 1091871 7930338 1070509 2001682 1101520 Description Package Assembly Harness, ELRPW Power Legrest - Right Harness, ELRPW Power Legrest - Left Screw, Socket Head (1/4-20 x 1-3/4") Clamp, Half (Non-Threaded) Locknut (#8-32) Bracket, Harness Wire, Black Screw, Socket Head Cap (#8-32 x 5/8") Nut, Acorn (1/4-20) Fastener, Loop with Adhesive Back (1" Wide x 2" Long) Wrap, Tie (8") Kit, Power Leg Harness and Mounting Hardware A - Includes Items 1-9 117 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com 1 1 1 1 1 1 1 25 1 1 1 2 4 4 2 4 2 4 1 2 4 1 Electronics Tilt Recline Single Switch (TRSS) 118 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com Electronics Tilt Recline Single Switch (TRSS) Item Number Note 1 2 3 4 5 6 7 2 5 6 8 9 10 11 2 12 13 14 15 16 NOTE: C A Quantity Per Part Number 1089384 1091496 B 1091497 D 1139684 1119418 Description Package Assembly Switch, Toggle Tilt Recline Single (TRSS) Kit, Joystick Tube Toggle Switch Mounting Hardware Half Clamp, Threaded Holes Half Clamp, Non-Threaded Holes Screw, Hex Head Cap w/ Patch (1/4-20 x 1/2") Bracket, Toggle Switch Mounting Screw, Hex Head (1/4-20 x 1-1/8") Kit, Quad Link Toggle Switch Mounting Hardware Screw, Hex Head Cap w/ Patch (1/4-20 x 1/2") Bracket, Toggle Switch Mounting Bracket, Quad Link Toggle Switch Mounting Screw, Phillips Pan Head (#10-32 x 1-3/8") Locknut (1/4-20) Locknut (#10-32) Kit, Quad Link Toggle Switch Mounting Hardware Locknut (#10-32) Screw, Hex Head Cap w/ Patch (1/4-20 x 1/2") Bracket, Toggle Switch Mounting Screw, Phillips Pan Head w/Patch (#10-32 x 7/8") Cable, Auxiliary Power 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 2 1 4 1 1 2 2 2 1 2 2 1 2 1 A - Includes Items 3-7 B - Before 10/31/05 and Includes Items 5, 6, and 8-11 C - The TRSS switch was revised 5/15/03 starting with serial number 03C154725 to function with MK5 electronics. TRSS switches with serial numbers before 03C154725 are not compatible with MK5 electronics. D - After 10/30/05 and includes items 12-15 119 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com Electronics 4-Way Switch and Mounting Hardware NOTE: 4-way switch is used with a MK5 TAC or MK5 TRCM controller 120 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com Electronics 4-Way Switch and Mounting Hardware NOTE: 4-way switch is used with a MK5 TAC or MK5 TRCM controller Item Number Note 1 2 3 4 5 6 7 8 2 5 7 8 9 10 2 11 12 13 14 15 15 NOTE: A Quantity Per Part Number 1080116 1077519 B 1077520 C 1139418 1134132 1134133 Description Package Assembly Switch, 4-Way (FWT) Kit, 4-Way Switch Joystick Tube Mounting Hardware Half Clamp, Threaded Holes Half Clamp, Non-Threaded Holes Bracket, Joystick Mounting Screw, Hex Head (1/4-20 x 1-1/8") Washer (#10 Flat) Screw, Phillips Pan Head (#10-32 x 1/2") Kit, 4-Way Switch Quad Link Mounting Hardware Bracket, Quad Link Mounting Washer (#10 Flat) Screw, Phillips Pan Head (#10-32 x 1/2") Locknut (#10-32) Screw, Phillips Pan Head (#10-32 x 1-3/8") Kit, 4-Way Switch Quad Link Mounting Hardware Screw, Phillips Pan Head w/Patch (#10-32 x 7/8") Screw, Phillips Pan Head (#10-32 x 1/2") Washer, Nylon (#10) Locknut (#10-32) Bracket, 4-Way Switch Quad Link, Black - Right Bracket, 4-Way Switch Quad Link, Black - Left A - Includes items 3-8 B - Before 10/31/05. Includes items 5 and 7-10 C - After 10/30/05. Includes items 11-14. 121 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 1 1 2 2 2 2 1 2 2 2 2 1 1 MK5 SAC and Mounting Hardware 122 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com MK5 SAC and Mounting Hardware Item Number Note 1 2 3 4 5 6 7 8 NOTE: A,C B Quantity Per Part Number 1049593 1119458-NLA 1119418 Description Package Assembly Kit, SNP/DI, MK5 SAC, 4WSB, S4WSB, GTAM, AUX12M6, AUX34M6 Mtg. Hdwr. Half Clamp, Threaded Holes Half Clamp, Non-Threaded Holes Screw, Hex Head (1/4-20 x 1-1/8") Plate, Mounting Screw, Phillips Pan Head (#4-40 x 3/8") Control, MK5 SAC Cable, Auxiliary Power 1 1 1 1 1 1 1 1 1 1 1 2 1 2 1 1 A - Includes items 2-6 B - MK5 SAC was discontinued 1/6/06 and replaced with a MK5 TAC. See page titled " MK5 TAC/TRCM and Mounting Hardware" for Round or Extruded canes, depending on the chair configuration C - As of 5/22/07 the Mounting Plate holes and the orientation of the Hardware was revised to attach the electronics closer to the chair. The Mounting Hardware Kit is backward compatible. 123 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com MK5 TAC/TRCM and Mounting Hardware For Extruded Back Canes 124 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com MK5 TAC/TRCM and Mounting Hardware For Extruded Back Canes Item Number Note 1 2 3 4 5 6 7 7 8 A B C Quantity Per Part Number 1121180 1082699 1079316 1113601 1026907 1078214 1118728 1118729 1119418 1142595 2 3 4 5 6 7 D D D NOTE: 1095503 1095502 1141485 Description Package Assembly T.A.C./T.R.C.M. Mounting Hardware For Extruded Back Canes T-Nut (1/4-20) Screw, Phillips Pan Head (#10-32 x 3/8") Bracket, Controller Mounting, Black Washer (1/4 x 1/2 x 1/16") Screw, Hex Head Cap w/ Patch (1/4-20 x 1/2") Controller, MK5 TAC Controller, MK5 T.R.C.M. Cable, Auxiliary Power Kit, MK5 SAC To MK5 TAC Conversion For Tarsys 2GT w/ Extruded Back Canes on TDX T-Nut (1/4-20) Screw, Phillips Pan Head (#10-32 x 3/8") Bracket, Controller Mounting, Black Washer (1/4 x 1/2 x 1/16") Screw, Hex Head Cap w/ Patch (1/4-20 x 1/2") Controller, MK5 TAC Cable Tie (11-1/2" Long) Cable Tie (5-5/8" Long) Instruction Sheet, MK5 SAC To MK5 TAC Conversion For Tarsys 2GT w/ Round & Extruded Back Canes on TDX Package, Cable Ties (5-5/8" Long) Package, Cable Ties (11-1/2") Instruction Sheet, MK5 SAC To MK5 TAC Conversion For Tarsys 2GT w/ Round & Extruded Back Canes on TDX 1 1 1 1 1 1 1 1 1 1 1 2 2 1 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 1 2 2 1 10 10 1 10 10 1 1 1 1 A - Includes items 2-6 B - When converting a MK5 SAC to a MK5 TAC, refer to the Conversion Kit part # 1142595. Convertion Kit includes all parts needed to convert a (Tarsys 2GT w/ Extruded Canes on TDX) C - Not Shown. Kit components for a Tarsys 2GT w/ Extruded Canes on TDX uses items 2-7, Cable Ties and Instruction Sheet D - Not Shown 125 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com MK5 TAC/TRCM and Mounting Hardware For Round Back Canes 126 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com MK5 TAC/TRCM and Mounting Hardware For Round Back Canes Item Number Note 1 2 3 4 5 6 7 8 9 10 10 11 A B C D Quantity Per Part Number 1121181 1079316 1082908 60275X000 1026907 1113638 1078214 1113601 1121024 1118728 1118729 1119418 1142593 2 3 4 5 6 7 8 9 10 E E E NOTE: 1095503 1095502 1141485 Description Package Assembly T.A.C./T.R.C.M. Mounting Hardware For Round Back Canes Screw, Phillips Pan Head (#10-32 x 3/8") Spacer, Coved (5/16 x 29/32 x 7/16") Locknut (1/4-20) Washer (1/4 x 1/2 x 1/16") Bracket, Vent-Connect Upper Right Screw, Hex Head Cap w/ Patch (1/4-20 x 1/2") Bracket, Controller Mounting, Black Screw, Hex Head Cap with Patch (1/4-20 x 5/8") Controller, MK5 TAC Controller, MK5 T.R.C.M. Cable, Auxiliary Power Kit, MK5 SAC To MK5 TAC Conversion For Tarsys 2GT w/ Round Back Canes on TDX Screw, Phillips Pan Head (#10-32 x 3/8") Spacer, Coved (5/16 x 29/32 x 7/16") Locknut (1/4-20) Washer (1/4 x 1/2 x 1/16") Bracket, Vent-Connect Upper Right Screw, Hex Head Cap w/ Patch (1/4-20 x 1/2") Bracket, Controller Mounting, Black Screw, Hex Head Cap with Patch (1/4-20 x 5/8") Controller, MK5 TAC Cable Tie (11-1/2" Long) Cable Tie (5-5/8" Long) Instruction Sheet, MK5 SAC To MK5 TAC Conversion For Tarsys 2GT w/ Round & Extruded Back Canes on TDX Package, Cable Ties (5-5/8" Long) Package, Cable Ties (11-1/2") Instruction Sheet, MK5 SAC To MK5 TAC Conversion For Tarsys 2GT w/ Round & Extruded Back Canes on TDX 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 1 2 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 1 2 1 2 1 10 10 1 10 10 1 1 1 1 A - Includes items 2-9 B - Vent-connect upper right bracket used on the left side when mounting a MK5 TAC or TRCM C - When converting a MK5 SAC to a MK5 TAC, refer to the Conversion Kit part # 1142593. Convertion Kit includes all parts needed to convert a (Tarsys 2GT w/ Round Canes on TDX) D - Not Shown. Kit components for a Tarsys 2GT w/ Round Canes on TDX uses items 2-10, Cable Ties and Instruction Sheet E - Not Shown 127 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com Tilt/ Recline Potentiometers and Hardware 128 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com Tilt/ Recline Potentiometers and Hardware Item Number Note 1 2 3 4 5 6 7 8 A B Quantity Per Part Number 1117258 1117256 1091871 1029454 1008438 1087037 1094264 1091870 9 1031884 10 11 12 13 14 15 16 1025195 1079991 1061922 1025704 1115825 1008438 1094263 NOTE: Description Package Assembly Tilt Potentiometer Assembly Harness, Tilt Potentiometer with Nut and Washer Screw, Socket Head Cap (#8-32 x 5/8") Washer, Nylon (3/16 x 3/4 x 5/32") Screw, Set (#8-32 x 3/16") Linkage, Tilt Potentiometer Recline Potentiometer Assembly Screw, Socket Button Head w/ Patch (1/4-20 x 3/4") Bushing (9/32 x 3/8 x 11/32") Black or Color Chairs Locknut (1/4-20) Recline Potentiometer w/ Harness, Nut and Washer Screw, Hex Head Cap w/ Patch (5/16-18 x 1/2") Washer, Flat (5/16 x 5/8 x 1/16") Bracket, Fixed Recline Potentiometer, Black Screw, Set (#8-32 x 3/16") Linkage, Recline Potentiometer A - Includes items 2-6 B - Includes items 8-16 129 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Quad Link Before 10/9/03 130 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com Quad Link Before 10/9/03 Item Number Note 1 2 3 4 5 6 7 8 10 11 12 13 1 2 3 4 5 6 7 8 10 11 12 13 1 2 3 4 5 6 9 10 11 12 13 1 2 3 4 5 6 9 10 Quantity Per A Part Number 1052402 A 1115372 B 1117278 B 1117239 Description Package Assembly Kit, Quad Link Assembly - Right Ball Plunger with Lock Washer Assembly Locknut (#10-32) Screw, Socket Head (#10-32 x 1/2") Bushing, Bronze (3/16 x 1/4 x 1/4") Screw, Phillips Pan Head (#10-32 x 1-1/8") Spacer, Joystick Tube Stud Plate, Quad Link Screw, Hex Head (1/4-20 x 1-1/2") Spacer (1/4 x 3/8 x 3/16") Half Clamp, Non-Threaded Holes Half Clamp, Threaded Holes Kit, Quad Link Assembly - Left Ball Plunger with Lock Washer Assembly Locknut (#10-32) Screw, Socket Head (#10-32 x 1/2") Bushing, Bronze (3/16 x 1/4 x 1/4") Screw, Phillips Pan Head (#10-32 x 1-1/8") Spacer, Joystick Tube Stud Plate, Quad Link Screw, Hex Head (1/4-20 x 1-1/2") Spacer (1/4 x 3/8 x 3/16") Half Clamp, Non-Threaded Holes Half Clamp, Threaded Holes Kit, Quad Link Assembly - Right Ball Plunger with Lock Washer Assembly Locknut (#10-32) Screw, Socket Head (#10-32 x 1/2") Bushing, Bronze (3/16 x 1/4 x 1/4") Screw, Phillips Pan Head (#10-32 x 1-1/8") T-Nut (#10-32) Screw, Hex Head (1/4-20 x 1-1/2") Spacer (1/4 x 3/8 x 3/16") Half Clamp, Non-Threaded Holes Half Clamp, Threaded Holes Kit, Quad Link Assembly - Left Ball Plunger with Lock Washer Assembly Locknut (#10-32) Screw, Socket Head (#10-32 x 1/2") Bushing, Bronze (3/16 x 1/4 x 1/4") Screw, Phillips Pan Head (#10-32 x 1-1/8") T-Nut (#10-32) Screw, Hex Head (1/4-20 x 1-1/2") 131 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com 1 2 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1 2 4 4 4 1 1 3 3 1 1 1 1 2 4 4 4 1 1 3 3 1 1 1 1 2 4 4 2 2 3 3 1 1 1 1 2 4 4 2 2 3 Quad Link Before 10/9/03 Item Number Note 11 12 13 1 2 3 4 5 10 11 12 13 14 C,D Quantity Per Part Number 1034703-NLA 15 1 2 3 4 5 10 11 12 13 14 C 1114866 15 2 NOTE: 1114863 Description Package Assembly Spacer (1/4 x 3/8 x 3/16") Half Clamp, Non-Threaded Holes Half Clamp, Threaded Holes Kit, Quad Link Assembly - Right Ball Plunger with Lock Washer Assembly Locknut (#10-32) Screw, Socket Head (#10-32 x 1/2") Bushing, Bronze (3/16 x 1/4 x 1/4") Screw, Hex Head (1/4-20 x 1-1/2") Spacer (1/4 x 3/8 x 3/16") Half Clamp, Non-Threaded Holes Half Clamp, Threaded Holes Stud Plate, Quad Link For 1556 Heavy Duty Joystick Screw, Phillips Flat Head Countersunk (#10-32 x 1-1/8") Kit, Quad Link Assembly - Left Ball Plunger with Lock Washer Assembly Locknut (#10-32) Screw, Socket Head (#10-32 x 1/2") Bushing, Bronze (3/16 x 1/4 x 1/4") Screw, Hex Head (1/4-20 x 1-1/2") Spacer (1/4 x 3/8 x 3/16") Half Clamp, Non-Threaded Holes Half Clamp, Threaded Holes Stud Plate, Quad Link For 1556 Heavy Duty Joystick Screw, Phillips Flat Head Countersunk (#10-32 x 1-1/8") Ball Plunger with Lock Washer Assembly 1 1 1 1 2 1 1 1 1 1 1 1 1 3 1 1 1 1 2 4 4 3 3 1 1 1 1 2 1 2 1 1 1 1 1 1 1 1 1 1 2 4 4 3 3 1 1 1 1 2 2 1 A - Includes the Quad Link, items 2-8, 10-13 and used with a DPJ joystick B - Includes the Quad Link, items 2-6, 9-13 and used with a MPJ joystick C - includes the Quad Link, items 2-5, 10-15 and used with a 1556 Heavy Duty joystick D - Quad Link Assembly is no longer available. Please see Quad Link Assembly (After 10/30/06) category and use new Quad LInk design as a replacement. 132 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com Quad Link For MK5 DPJ Joystick 10/9/03 Thru 1/12/04 133 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com Quad Link For MK5 DPJ Joystick 10/9/03 Thru 1/12/04 Item Number Note Quantity Per Description 1 2 3 Part Number 1025714 1093063 1123005-NLA Screw, Phillips Pan Head (#10-32 x 1-1/8") Spacer, Joystick Tube Quad Link Hardware Consists Of: 4 each Screw, Socket Head Shoulder (1/4 x 1/4") 4 each Washer, Spring (1/4 x 1/2 x 1/32") 8 each Spacer, Flanged (1/4 x 9/16 x 1/8") 1 1 1 2 1 1 4 5 6 6 7 8 9 10 11 12 13 14 1123010 1027095 1121120-NLA 1123004-NLA 1093506 1093071 1121100 1121101 1102546 1123010 1095502 1121113-NLA Screw, Socket Head Set with Patch (1/4-20 x 3/4") Plug Button, Black (7/8") Quad Link Assembly -Right Quad Link Assembly -Left Tube, Joystick 1/2" Offset Clamp, Fixed Height Joystick Tube Mount, Joystick Quad Link Mount, Joystick Spin Screw, Phillips Pan Head (#10-32 x 7/8") Screw, Socket Head Set with Patch (1/4-20 x 3/4") Package, Cable Ties (11-1/2") Quad Link Joystick Mounting Hardware 1 1 1 1 1 1 1 1 1 1 10 1 1 1 1 1 1 1 1 1 2 2 2 1 NOTE: A,C A,C B,C Package Assembly A - Includes items 1-5. When ordering a Quad Link Assembly for the first time, item 14 must be ordered as well. When replacing an existing Quad Link made before 10/9/03, items 6, 7, 8 and 14 must be ordered. B - Includes items 9-13 and used for MK5 DPJ joystick. C - No Longer available, see Quad Link dated after 1/12/04 134 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com Quad Link For MK5 MPJ Joystick 10/9/03 Thru 1/12/04 135 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com Quad Link For MK5 MPJ Joystick 10/9/03 Thru 1/12/04 Item Number Note Quantity Per Description 1 2 3 Part Number 1025714 1093063 1123005-NLA Screw, Phillips Pan Head (#10-32 x 1-1/8") Spacer, Joystick Tube Quad Link Hardware Consists Of: 4 each Screw, Socket Head Shoulder (1/4 x 1/4") 4 each Washer, Spring (1/4 x 1/2 x 1/32") 8 each Spacer, Flanged (1/4 x 9/16 x 1/8") 1 1 1 2 1 1 4 5 6 6 7 8 9 10 11 1123010 1027095 1121120-NLA 1123004-NLA 1093506 1093071 1117216 1121101 1134086 Screw, Socket Head Set with Patch (1/4-20 x 3/4") Plug Button, Black (7/8") Quad Link Assembly -Right Quad Link Assembly -Left Tube, Joystick 1/2" Offset Clamp, Fixed Height Joystick Tube T-Nut (#10-32) Mount, Joystick Spin Screw, Socket Button Head w/ Patch (#10-32 x 1/2") Screw, Socket Head Set with Patch (1/4-20 x 3/4") Package, Cable Ties (11-1/2") Quad Link Joystick Mounting Hardware 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 2 1 10 1 2 2 1 12 13 14 NOTE: A,C A,C B,C 1123010 1095502 1121114-NLA Package Assembly A - Includes items 1-5. When ordering a Quad Link Assembly for the first time, item 14 must be ordered as well. When replacing an existing Quad Link made before 10/9/03, items 6, 7, 8 and 14 must be ordered. B - Includes items 9-13 and used for MK5 MPJ joystick. C - No Longer available, see Quad Link dated after 1/12/04 136 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com Quad Link For 1556 Heavy Duty Joystick 10/9/03 Thru 1/12/04 137 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com Quad Link For 1556 Heavy Duty Joystick 10/9/03 Thru 1/12/04 Item Number Note Quantity Per Description 1 2 3 Part Number 1025714 1093063 1123005-NLA Screw, Phillips Pan Head (#10-32 x 1-1/8") Spacer, Joystick Tube Quad Link Hardware Consists Of: 4 each Screw, Socket Head Shoulder (1/4 x 1/4") 4 each Washer, Spring (1/4 x 1/2 x 1/32") 8 each Spacer, Flanged (1/4 x 9/16 x 1/8") 1 1 1 2 1 1 4 5 6 6 7 8 9 1123010 1027095 1121120-NLA 1123004-NLA 1093506 1093071 1134086 Screw, Socket Head Set with Patch (1/4-20 x 3/4") Plug Button, Black (7/8") Quad Link Assembly -Right Quad Link Assembly -Left Tube, Joystick 1/2" Offset Clamp, Fixed Height Joystick Tube Screw, Socket Button Head w/ Patch (#10-32 x 1/2") Plate, 1556 Heavy Duty Joystick Quad Link Mount, Joystick Spin Screw, Phillips Round Head (#10-32 x 3/8") Screw, Socket Head Set with Patch (1/4-20 x 3/4") Package, Cable Ties (11-1/2") Quad Link Joystick Mounting Hardware 1 1 1 1 1 1 1 1 1 1 1 1 1 3 1 1 1 1 10 1 1 1 2 2 2 1 10 11 12 13 14 15 NOTE: A,C A,C B,C 1121111 1121101 1016401 1123010 1095502 1121115-NLA Package Assembly A - Includes items 1-5. When ordering a Quad Link Assembly for the first time, item 15 must be ordered as well. When replacing an existing Quad Link made before 10/9/03, items 6, 7, 8 and 15 must be ordered. B - Includes items 9-14 and used for 1556 Heavy Duty Joystick. C - No Longer available, see Quad Link dated after 1/12/04 138 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com Electronics Quad Link 1/13/04 Thru 10/30/05 139 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com Electronics Quad Link 1/13/04 Thru 10/30/05 Item Number Note 1 2 3 4 5 6 7 8 10 11 12 13 1 2 3 4 5 6 7 8 10 11 12 13 1 2 3 4 5 6 9 10 11 12 13 1 2 3 4 5 6 9 Quantity Per A Part Number 1052402 A 1115372 B 1117278 B 1117239 Description Package Assembly Kit, Quad Link Assembly - Right Ball Plunger with Lock Washer Assembly Locknut (#10-32) Screw, Socket Head (#10-32 x 1/2") Bushing, Bronze (3/16 x 1/4 x 1/4") Screw, Phillips Pan Head (#10-32 x 1-1/8") Spacer, Joystick Tube Stud Plate, Quad Link Screw, Hex Head (1/4-20 x 1-1/2") Spacer (1/4 x 3/8 x 3/16") Half Clamp, Non-Threaded Holes Half Clamp, Threaded Holes Kit, Quad Link Assembly - Left Ball Plunger with Lock Washer Assembly Locknut (#10-32) Screw, Socket Head (#10-32 x 1/2") Bushing, Bronze (3/16 x 1/4 x 1/4") Screw, Phillips Pan Head (#10-32 x 1-1/8") Spacer, Joystick Tube Stud Plate, Quad Link Screw, Hex Head (1/4-20 x 1-1/2") Spacer (1/4 x 3/8 x 3/16") Half Clamp, Non-Threaded Holes Half Clamp, Threaded Holes Kit, Quad Link Assembly - Right Ball Plunger with Lock Washer Assembly Locknut (#10-32) Screw, Socket Head (#10-32 x 1/2") Bushing, Bronze (3/16 x 1/4 x 1/4") Screw, Phillips Pan Head (#10-32 x 1-1/8") T-Nut (#10-32) Screw, Hex Head (1/4-20 x 1-1/2") Spacer (1/4 x 3/8 x 3/16") Half Clamp, Non-Threaded Holes Half Clamp, Threaded Holes Kit, Quad Link Assembly - Left Ball Plunger with Lock Washer Assembly Locknut (#10-32) Screw, Socket Head (#10-32 x 1/2") Bushing, Bronze (3/16 x 1/4 x 1/4") Screw, Phillips Pan Head (#10-32 x 1-1/8") T-Nut (#10-32) 140 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com 1 2 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 2 4 4 4 1 1 3 3 1 1 1 1 2 4 4 4 1 1 3 3 1 1 1 1 2 4 4 2 2 3 3 1 1 1 1 2 4 4 2 2 Electronics Quad Link 1/13/04 Thru 10/30/05 Item Number Note 10 11 12 13 1 2 3 4 5 10 11 12 13 14 C,E Quantity Per Part Number 1034703-NLA 15 1 2 3 4 5 10 11 12 13 14 C 1114866 15 1 D 2 3 4 5 6 8 10 11 12 13 1102027 Description Package Assembly Screw, Hex Head (1/4-20 x 1-1/2") Spacer (1/4 x 3/8 x 3/16") Half Clamp, Non-Threaded Holes Half Clamp, Threaded Holes Kit, Quad Link Assembly - Right Ball Plunger with Lock Washer Assembly Locknut (#10-32) Screw, Socket Head (#10-32 x 1/2") Bushing, Bronze (3/16 x 1/4 x 1/4") Screw, Hex Head (1/4-20 x 1-1/2") Spacer (1/4 x 3/8 x 3/16") Half Clamp, Non-Threaded Holes Half Clamp, Threaded Holes Stud Plate, Quad Link For 1556 Heavy Duty Joystick Screw, Phillips Flat Head Countersunk (#10-32 x 1-1/8") Kit, Quad Link Assembly - Left Ball Plunger with Lock Washer Assembly Locknut (#10-32) Screw, Socket Head (#10-32 x 1/2") Bushing, Bronze (3/16 x 1/4 x 1/4") Screw, Hex Head (1/4-20 x 1-1/2") Spacer (1/4 x 3/8 x 3/16") Half Clamp, Non-Threaded Holes Half Clamp, Threaded Holes Stud Plate, Quad Link For 1556 Heavy Duty Joystick Screw, Phillips Flat Head Countersunk (#10-32 x 1-1/8") Kit, Quad Link Assembly - Right For TCHJOY/TCPDM4 Touchpad Ball Plunger with Lock Washer Assembly Locknut (#10-32) Screw, Socket Head (#10-32 x 1/2") Bushing, Bronze (3/16 x 1/4 x 1/4") Screw, Phillips Pan Head (#10-32 x 1-1/8") Stud Plate, Quad Link MKIV TCHJOY/TCPDM4 Screw, Hex Head (1/4-20 x 1-1/2") Spacer (1/4 x 3/8 x 3/16") Half Clamp, Non-Threaded Holes Half Clamp, Threaded Holes 141 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com 1 1 1 1 1 2 1 1 1 1 1 1 1 1 3 3 1 1 1 1 2 4 4 3 3 1 1 1 1 2 1 2 1 1 1 1 1 1 1 1 1 1 2 4 4 3 3 1 1 1 1 2 1 1 2 1 1 1 1 1 1 2 4 4 2 1 1 1 1 1 3 3 1 1 Electronics Quad Link 1/13/04 Thru 10/30/05 Item Number Note Quantity Per Part Number 16 2 NOTE: 1114863 Description Package Assembly Screw, Phillips Flat Head Countersunk (#4-40 x 3/8") Ball Plunger with Lock Washer Assembly 1 4 2 1 A - Includes the Quad Link, items 2-8, 10-13 and used with an DPJ joystick B - Includes the Quad Link, items 2-6, 9-13 and used with a MPJ joystick C - Includes the Quad Link, items 2-5, 10-15 and used with a 1556 Heavy Duty joystick D - Includes the Quad Link, items 2-6, 8, 10-12 and 16. Used with a Touch Pad joystick. Left side mounted Quad Link must be requested as a "special" order E - Quad Link Assembly is no longer available. Please see Quad Link Assembly (After 10/30/05) category and use new Quad LInk design as a replacement. 142 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com Electronics Quad Link (QLA) After 10/30/05 When converting an old style Quad Link that attaches to a mounting plate or (a Flex Tube or Touch Pad Joystick Tube) is currently on the chair then order the following: Quad Link Mtg. Hdwr. (item 4), Quad Link (item 1) & Ht. Adj. Joystick Tube Clamp (item 11) NOTE: Substitute (item 4) with 2 ea. of the PPH Screws (item 5) when an offset joystick tube is currently on the chair. Additional Joystick Mtg. Hdwr. must be ordered when a 1556 Heavy Duty, TCPD Touch Pad or MPJ joystick are used. 143 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com Electronics Quad Link (QLA) After 10/30/05 When converting an old style Quad Link that attaches to a mounting plate or (a Flex Tube or Touch Pad Joystick Tube) is currently on the chair then order the following: Quad Link Mtg. Hdwr. (item 4), Quad Link (item 1) & Ht. Adj. Joystick Tube Clamp (item 11) NOTE: Substitute (item 4) with 2 ea. of the PPH Screws (item 5) when an offset joystick tube is currently on the chair. Additional Joystick Mtg. Hdwr. must be ordered when a 1556 Heavy Duty, TCPD Touch Pad or MPJ joystick are used. Item Number Note Quantity Per 1 G Part Number 1140896 1 G 1140897 2 3 4 5 6 7 8 9 10 5 11 12 A B C,C1 1140425 1140424 1139416 I D 1105414 1139422 1139925-NLA 13 14 15 16 17 18 19 NOTE: E 1139683 F 1139682 H 1134844 Description Package Assembly Quad Link with Adjustable Joystick Tray (QLA) and Instruction Sheet - Right Quad Link with Adjustable Joystick Tray (QLA) and Instruction Sheet - Left Kit, Quad Link Latch Hardware Kit, Quad Link Screw Fastener Hardware Kit, ASBA/ADJASBA Quad Link Mounting Hardware Screw, Phillips Pan Head w/ Patch (10-32 x 3/4") Screw, Phillips Pan Head (#10-32 x 1-1/8") Cable Tie (11-1/2" Long) Spacer, Joystick Tube Tube, Joystick 1/2" Offset Plug Button, Black (7/8") Screw, Phillips Pan Head w/ Patch (10-32 x 3/4") Clamp, Height Adjustable Joystick Tube (ARM250) Kit, 1556 Heavy Duty Joystick To Quad Link Mounting Hardware Screw, Phillips Pan Head (#10-32 x 1/2") Plate, 1556 HD Joystick Quad Link Kit, TCPD Touch Pad To Quad Link Mounting Hardware Plate, TCPD Touch Pad Quad Link Screw, Phillips Pan Head (#4-40 x 3/8") Kit, MPJ Joystick To Quad Link Mounting Hardware T-Nut (#10-32) Instruction Sheet, Quad Link 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 1 1 1 1 2 1 1 1 1 1 2 1 1 1 1 1 1 1 1 4 1 2 1 A - Latch Kit includes 4 ea. Button Head Cap Screws (10-32 x 3/8"), 2 ea. Latch Spring Assembly, 4 ea. Phillips Flat C'Sunk Head Screws, 2 ea. Spring Catch Plates, 2 ea. Socket Head Set Screws (10-32 x 3/8") B - Screw Fastener Kit includes 4 ea. Socket Head Shoulder Screws (3/8 x 3/8"), 2 ea. Socket Head Cap Screws (1/4-20 x 3/8"), 2 ea. Socket Head Set Screws (1/4-20 x 1/2"), 4 ea. Socket Head Set Screws (10-32 x 1/8") C - Includes items 5-10. The Quad Link Mounting Hardware accommodates MK5 SPJ-80, DPJ, MPJ, and PSF/PSR joysticks. C1 - When ordering the Quad Link for the first time, Additional hardware is required for 1556 Heavy Duty, TCPD Touch Pad joysticks and (MPJ joysticks if the T-nuts are missing). See pictorial for reference. D - Includes items 13 and 14 E - Includes items 16 and 17 F - Includes 2 ea. of item 19 G - The 4-Way Switch and Single Function Toggle Switch (TRSS) Mounting Plate has changed and may be required when converting a Quad Link assembled to a mounting plate over to a Quad Link introduced after 10/30/05 H - Not Shown I - Individual components are non-saleable 144 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com Arm Pads Otto Bock 145 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com Arm Pads Otto Bock Item Number Note A A A A A A A A A A A A A NOTE: Quantity Per Part Number 0020700 0023000 0021700 0020600 0023300 0020500 0021600 0021500 0021400 0021300 0020400 0164900 0164800 Description Package Assembly Pad, Small Channel Forearm Pad, Flat Hand (Large) Kit, Hand/ Forearm Pad Strap Pad, Medium Channel Forearm Pad, Flat Hand (Medium) Pad, Large Channel Forearm Pad, Palm Extensor Hand - Right Pad, Palm Extensor Hand - Left Elevating Swivel Unit 7/8" - Right Elevating Swivel Unit 7/8" - Left Pad, One Piece Channel Forearm Pad, Cone Hand - Right Pad, Cone Hand - Left A - See pictorial for reference 146 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Headrest Support Assembly A.B.S. Curved and Profile Back 147 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com Headrest Support Assembly A.B.S. Curved and Profile Back Item Number Note 1 1 1 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 NOTE: A B D D C Quantity Per Part Number 0127700 0128000 0022600 0022400 0197024 0271524 1077076 0271124 0288606 0271224 0271324 1027268 0271424 0283724 0067006 0273100 0237422-NLA 0237522-NLA 1072439 0288706 7930333 1090196 1072440 0235322 0258006 0235222 Description Package Assembly Headrest, Curved (6"W x 7"H) Headrest, Two-Step (8-1/2"W x 5-1/2"H) Headrest, Small Adjustable, Otto Bock (9"W x 3-1/2"H) Headrest, Large Adjustable, Otto Bock (12"W x 6"H) Fixture Assembly, Offset Support Tube, Offset Fixture Plug Button, Square (1/2") Collar, Offset Fixture Tube Set Screw, Socket Head (#10-24 x 3/16") Half Clamp, Non-Threaded Holes Half Clamp, Threaded Holes Screw, Allen Head (1/4-20 x 1") Tube, Fixture Adjustment Ring, Fixture Clamp Screw, Socket Head (#10-32 x 1/2") Kit, Headrest Clamp Clamp, Small Bottom Half Clamp, Small Top Half Knob, Adjustment (1-3/8" Dia., 3/4" Long Threads) Screw, Socket Head (1/4-20 x 1") Locknut (1/4-20) Assembly, Headrest Clamp Knob, Adjustment (1-3/8" Dia., 1/2"Long Threads) Clamp, Large Top Half Screw, Socket Head (1/4-20 x 5/8") Clamp, Large Bottom Half A - Includes Items 3-12 B - Includes Items 14-18 C - Includes Items 20-23 D - Clamp is no longer available individually. See item 13 Clamp Assembly part number 0273100 148 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 25 1 1 1 1 1 1 1 1 2 1 1 1 1 3 1 1 3 1 1 1 1 2 2 1 1 1 2 1 Lateral Support Assembly For Extruded Canes 149 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com Lateral Support Assembly For Extruded Canes Item Number Note 1 2 3 4 6 7 8 9 10 10 11 1 2 3 4 6 7 8 9 10 10 11 5 6 7 8 9 10 11 5 A A B B Quantity Per Part Number 1090200 1090201 1090198 1090199 6 7 8 9 10 11 NOTE: Description Package Assembly Kit, Swingaway Lateral Support Assembly w/ Medium Pads Pad, Lateral Support, Medium (6" Wide x 4" High) T-Nut (1/4-20) Screw, Socket Flat Head C'Sunk (1/4-20 x 1/2") Bracket, Extension Offset, Black (1/2") Bracket, Extension Offset, Black (1") Bracket, Extension Offset, Black (2") Bracket, Flush Mount, Black Swingaway Bracket - Right Swingaway Bracket - Left Screw, Socket Flat Head C'Sunk (#10-32 x 1/2") Kit, Swingaway Lateral Support Assembly w/ Large Pads Pad, Lateral Support, Large (6" Wide x 5" High) T-Nut (1/4-20) Screw, Socket Flat Head C'Sunk (1/4-20 x 1/2") Bracket, Extension Offset, Black (1/2") Bracket, Extension Offset, Black (1") Bracket, Extension Offset, Black (2") Bracket, Flush Mount, Black Swingaway Bracket - Right Swingaway Bracket - Left Screw, Socket Flat Head C'Sunk (#10-32 x 1/2") Kit, Swingaway Bracket Assembly w/ Offset Brackets - Right Bracket, Extension Offset, Black (1/2") Bracket, Extension Offset, Black (1") Bracket, Extension Offset, Black (2") Bracket, Flush Mount, Black Swingaway Bracket - Right Screw, Socket Flat Head C'Sunk (#10-32 x 1/2") Kit, Swingaway Bracket Assembly w/ Offset Brackets - Left Bracket, Extension Offset, Black (1/2") Bracket, Extension Offset, Black (1") Bracket, Extension Offset, Black (2") Bracket, Flush Mount, Black Swingaway Bracket - Left Screw, Socket Flat Head C'Sunk (#10-32 x 1/2") A - Includes items 2-4 and 6-11 B - Includes items 6-11 150 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com 2 1 1 1 1 1 1 1 1 1 1 1 2 2 4 8 2 2 2 4 1 1 8 1 1 1 1 1 1 1 1 1 1 1 1 2 4 8 2 2 2 4 1 1 8 1 1 1 1 1 1 1 1 1 1 1 2 1 4 1 1 1 1 1 1 1 1 1 1 2 1 4 Lateral Support Assembly (Clamp-On) For Round Canes Tarsys 151 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com Lateral Support Assembly (Clamp-On) For Round Canes Tarsys Item Number Note 1 3 4 5 6 7 7 8 9 11 12 13 14 15 1 3 4 5 6 7 7 8 9 11 12 13 14 15 2 A A B 3 4 5 6 7 8 9 11 12 13 Quantity Per Part Number 1107298 1107299 1107245 Description Package Assembly Kit, Swingaway Lateral Support Assemblies w/ Medium Pads (Pair) Bracket, Extension Offset, Black (2") Bracket, Extension Offset, Black (1") Bracket, Extension Offset, Black (1/2") Bracket, Flush Mount, Black Bracket, Swingaway, Cane Clamp - Right Bracket, Swingaway, Cane Clamp - Left Screw, Socket Flat Head C'Sunk (#10-32 x 1/2") Bracket, Mounting, Black Screw, Hex Head (1/4-20 x 1-1/8") Half Clamp, Non-Threaded Holes Half Clamp, Threaded Holes Screw, Socket Flat Head C'Sunk (1/4-20 x 1/2") Pad, Lateral Support, Medium (6" Wide x 4" High) Kit, Swingaway Lateral Support Assembies w/ Large Pads (Pair) Bracket, Extension Offset, Black (2") Bracket, Extension Offset, Black (1") Bracket, Extension Offset, Black (1/2") Bracket, Flush Mount, Black Bracket, Swingaway, Cane Clamp - Right Bracket, Swingaway, Cane Clamp - Left Screw, Socket Flat Head C'Sunk (#10-32 x 1/2") Bracket, Mounting, Black Screw, Hex Head (1/4-20 x 1-1/8") Half Clamp, Non-Threaded Holes Half Clamp, Threaded Holes Screw, Socket Flat Head C'Sunk (1/4-20 x 1/2") Pad, Lateral Support, Large (6" Wide x 5" High) Kit, Swingaway Bracket Assembly with Offset Brackets, Cane Clamp - Right Bracket, Extension Offset, Black (2") Bracket, Extension Offset, Black (1") Bracket, Extension Offset, Black (1/2") Bracket, Flush Mount, Black Bracket, Swingaway, Cane Clamp - Right Screw, Socket Flat Head C'Sunk (#10-32 x 1/2") Bracket, Mounting, Black Screw, Hex Head (1/4-20 x 1-1/8") Half Clamp, Non-Threaded Holes Half Clamp, Threaded Holes 152 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 1 1 12 2 6 2 2 4 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 1 1 12 2 6 2 2 4 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 6 1 3 1 1 Lateral Support Assembly (Clamp-On) For Round Canes Tarsys Item Number Note 2 3 4 5 6 7 8 9 11 12 13 10 11 12 13 NOTE: B C Quantity Per Part Number 1107246 1107117 Description Package Assembly Kit, Swingaway Bracket Assembly with Offset Brackets, Cane Clamp - Left Bracket, Extension Offset, Black (2") Bracket, Extension Offset, Black (1") Bracket, Extension Offset, Black (1/2") Bracket, Flush Mount, Black Bracket, Swingaway, Cane Clamp - Left Screw, Socket Flat Head C'Sunk (#10-32 x 1/2") Bracket, Mounting, Black Screw, Hex Head (1/4-20 x 1-1/8") Half Clamp, Non-Threaded Holes Half Clamp, Threaded Holes Kit, Lateral Support Mounting Hardware Screw, Hex Head (1/4-20 x 1-1/8") Half Clamp, Non-Threaded Holes Half Clamp, Threaded Holes A - Includes items 3-9 and 11-15 B - Includes items 3-9 and 11-13 C - Includes items 11-13 153 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 6 1 3 1 1 1 3 1 1 Back Mounting Hardware (Infinity, Personal, JAY, Silhouette, Contour U Backs w/ Extruded Canes) (Profile Back w/ 7/8" Round Canes) NOTE: V.S.R. is eliminated when back mounting hardware listed below is attached to Recline Only (2GR) and Tilt/Recline (2GTR) seating systems. 154 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com Back Mounting Hardware (Infinity, Personal, JAY, Silhouette, Contour U Backs w/ Extruded Canes) (Profile Back w/ 7/8" Round Canes) NOTE: V.S.R. is eliminated when back mounting hardware listed below is attached to Recline Only (2GR) and Tilt/Recline (2GTR) seating systems. Item Number Note Quantity Per 1 1 1 1 A,M A,M,Q A,M A,M Part Number 1099776 1099778 1099777 1102697 2 2 3 3 4 4 4 4 4 4 4 4 5 5 6 6 7 8 9 L L L L B C D E F G H I K,P K,P N,P O,P P P P J 1028481 1028481 1082699 1082699 1099654 1099655 1099656 1099657 1099650 1099651 1099652 1099653 0190500-NLA 0190600 0052906 0051206 1003545 0226500-NLA 0050100 1086460 Description Package Assembly Hardware, Infinity Back Mounting (Pair) Hardware, Personal Back Mounting (Pair) Hardware, JAY Back Mounting (Pair) Hardware, Contour U and Silhouette Back Mounting (Pair) Screw, Socket Head (1/4-20 x 1/2") Screw, Socket Head (1/4-20 x 1/2") T-Nut (1/4-20) T-Nut (1/4-20) Brackets, Back Mounting Brackets, Back Mounting Brackets, Back Mounting Brackets, Back Mounting Brackets, Back Mounting Brackets, Back Mounting Brackets, Back Mounting Brackets, Back Mounting Block, Glide (16", 18" and 20" Wide) Block, Glide (17" and 19" Wide) Screw, Socket Button Head (1/4-20 x 3/4") Screw, Socket Head (1/4-20 x 1-1/4) Screw, Socket Head (1/4-20 x 1-1/4") Knob, Tee Washer, Nylon Flat (1/4 x 1/2 x 1/16") Foam Hand Grip (4-1/2" Long) 155 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com 2 2 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 8 4 8 4 2 2 1 1 1 1 1 1 4 4 4 4 2 2 4 2 Back Mounting Hardware (Infinity, Personal, JAY, Silhouette, Contour U Backs w/ Extruded Canes) (Profile Back w/ 7/8" Round Canes) NOTE: V.S.R. is eliminated when back mounting hardware listed below is attached to Recline Only (2GR) and Tilt/Recline (2GTR) seating systems. NOTE: A - Includes Items 2-4 B - Infinity Back - Upper Left or Lower Right C - Infinity Back - Upper Right or Lower Left D - Personal Back - Right E - Personal Back - Left F - JAY Back - Upper Right G - JAY Back - Upper Left H - JAY Back - Lower Right, Contour U Back - Upper Right or Lower Left (2 each assembly), Silhouette Back - Upper Left or Lower Right (2 each assembly) I - JAY Back - Lower Left, Contour U Back - Upper Left or Lower Right (2 each assembly), Silhouette Back - Upper Right or Lower Left (2 each assembly) J - Not Shown K - New foam grips are required when mounting sliding glide blocks onto the 7/8" round back canes. Existing foam grips will need to be replaced. L - Infinity, JAY, Contour U and Silhouette Backs have 8 ea. assembly where as Personal Back has 4 ea. assembly. M - V.S.R. is eliminated when back mounting hardware is attached to recline only (2GR) and tilt/recline (2GTR) seating systems. N - 16, 18, 20 Wide O - 17 and 19 Wide P - Profile Back Mounting Hardware for 7/8" round canes consist of the following: 4 each of (#0190500 and #0052906 for 16", 18", 20" wide or #0190600 and #0050100 for 17", 19" wide) and 2 each of #1003545, #1056269, #1086460. Q - Personal Back mounting hardware part number 1099778 is not compatible with the new Personal Back 10 and Personal Back 10 Plus models. 156 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com Vent Tray Assembly without Mounting Hardware 157 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com Vent Tray Assembly without Mounting Hardware Item Number Note 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 A,B C NOTE: Quantity Per Part Number 1115816 1113258 1113256 1113636 1044214 1025457 1115813 1113257 1026104 1072692 1115822 1007453 1019590 1072319 1070587 1079635 1025736 1008432 1006773 1115820 1118361 1114968 1125645 Description Package Assembly Vent Tray Assembly Strap with Buckle Vent Tray Linkage Assembly, Right Tube, Vent Tray Support Nut, Hex with Nylon Cap (1/4-20) Spacer, Coved (1/4 x 3/4 x 11/32") Plug, Slide Tube Vent Tray Linkage Assembly, Left Spacer Lockwasher, Split (5/16") Spacer, Vent Lockwasher, Split (1/4") Screw, Socket Button Head (1/4-20 x 1-5/8") Screw, Socket Button Head (#10-32 x 1/2") Washer, Flat (3/16 x 5/8 x 1/16") Bushing, Flange Locknut (1/4-20) Screw, Socket Button Head (1/4-20 x 1-1/4") Screw, Socket Head (1/4-20 x 1/2") Bracket, Vent Tray Decal, Approved Charger and Harness Warning Tray, Vent Spring, Yellow; EXTRA Heavy Duty 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 4 2 1 2 2 2 2 2 2 2 2 4 2 4 1 1 1 2 A - Includes items 2-22 and used for 2GT, 2GR and 2GTR systems. When adding a vent tray assembly to extruded back canes for the first time, see page titled "Vent Tray Kit For Extruded Back Canes" and order item number 1 B - When Center Mount Riggings are present and a customer is adding a Vent Tray for the first time in the field, additional Invacare Technical Assistance may be required. Call 1-800-832-4707 for instructions. C - Not Shown. EXTRA Heavy Duty Springs must be ordered as well when a vent tray assembly is requested for the first time. 158 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com Vent Tray Mounting Hardware For Extruded Back Canes 159 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com Vent Tray Mounting Hardware For Extruded Back Canes Item Number Note Quantity Per 1 A Part Number 1121260 1 B 1121261 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 NOTE: 1097191 1082699 1026035 1095360 1078214 1026907 1098289 1078214 1121021 1025195 1049527 1115815 1000212 60275X000 1110468 1007453 1097179 Description Package Assembly Vent Tray Mounting Hardware, 16"-19" Wide Seats with Extruded Canes Vent Tray Mounting Hardware, 20"-22" Wide Seats with Extruded Canes Bracket, Upper Link T-Nut (1/4-20) Locknut (#10-24) Washer, Steel (7/8 x 3/8 x 1/16") Screw, Hex Head Cap w/ Patch (1/4-20 x 1/2") Washer (1/4 x 1/2 x 1/16") Screw, Socket Head Shoulder (1/4 x 1") Screw, Hex Head Cap w/ Patch (1/4-20 x 1/2") Bracket, Seat Vent, Black (20"-22" Wide) Locknut (1/4-20) Washer, Nylon (3/8 x 3/4 x 1/16") Bracket, Vent Tray Attachment Screw, Shoulder (1/4 x 1-1/4") Locknut (1/4-20) Screw, Socket Head Cap (1/4-20 x 5/8") Lockwasher, Split (1/4") Bushing, Flanged A - Includes items 2-8 and 12-18 B - Includes items 2-18 160 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com 2 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 4 4 2 4 6 2 4 2 4 2 2 2 4 4 2 2 Vent Tray Mounting Hardware For Round Back Canes 161 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com Vent Tray Mounting Hardware For Round Back Canes Item Number Note Quantity Per 1 A Part Number 1121258 1 B 1121259 2 3 4 5 6 6 7 8 9 10 11 12 13 14 15 16 17 18 19 NOTE: C C 1097191 1121024 1078214 1026907 1113638 1121097 1025195 1082908 1121021 1098289 1095360 1026035 1007453 1097179 1049527 1115815 1000212 60275X000 1110468 Description Package Assembly Vent Tray Mounting Hardware, 16"-19" Wide Seats with Round Canes Vent Tray Mounting Hardware, 20"-22" Wide Seats with Round Canes Bracket, Upper Link Screw, Hex Head Cap with Patch (1/4-20 x 5/8") Screw, Hex Head Cap w/ Patch (1/4-20 x 1/2") Washer (1/4 x 1/2 x 1/16") Bracket, Vent-Connect Upper Right Bracket, Vent-Connect Upper Left Locknut (1/4-20) Spacer, Coved (5/16 x 29/32 x 7/16") Bracket, Seat Vent, Black (20"-22" Wide) Screw, Socket Head Shoulder (1/4 x 1") Washer, Steel (7/8 x 3/8 x 1/16") Locknut (#10-24) Lockwasher, Split (1/4") Bushing, Flanged Washer, Nylon (3/8 x 3/4 x 1/16") Bracket, Vent Tray Attachment Screw, Shoulder (1/4 x 1-1/4") Locknut (1/4-20) Screw, Socket Head Cap (1/4-20 x 5/8") A - Includes items 2-8 and 10-19 B - Includes items 2-19 C - Quantity of 8 are used for 20"-22" wide seats 162 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com 2 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 4 4 6 1 1 4 4 2 2 2 4 2 2 2 2 2 4 4 Vent Tray Kit For Extruded & Round Back Canes 16"-22" Wide Seating Systems A Battery Support Bracket Assembly for Vent must be ordered when a chair is equipped with a TRBKTS option 163 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com Vent Tray Kit For Extruded & Round Back Canes 16"-22" Wide Seating Systems A Battery Support Bracket Assembly for Vent must be ordered when a chair is equipped with a TRBKTS option Item Number Note 1 A,B,C, D 2 2 2 2 3 3 3 3 3 3 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 5 5 5 5 5 5 Quantity Per Part Number 1123841 Description Package Assembly Kit, Vent Tray Assembly For 16"-22" Wide Systems 1 1 Kit, Battery Wire Harness with Terminal Hardware, 22NF - Rear Kit, Battery Wire Harness with Terminal Hardware, 22NF - Front Battery Wire Harness with Terminal Hardware, 22NF Vent Battery Tray Assembly, TDX 22NF For Vent Label, 22NF Terminal Configuration Warning Label, 3 Battery Configuration Warning Decal, Blank Logo Decal, Invacare Medallion - Large Locknut (1/4-20) Sleeve, Door Pivot Tray, Vent Strap with Buckle Vent Tray Linkage Assembly, Right Tube, Vent Tray Support Nut, Hex with Nylon Cap (1/4-20) Spacer, Coved (1/4 x 3/4 x 11/32") Plug, Slide Tube Vent Tray Linkage Assembly, Left Spacer Lockwasher, Split (5/16") Spacer, Vent Lockwasher, Split (1/4") Screw, Socket Button Head (1/4-20 x 1-5/8") Screw, Socket Button Head (#10-32 x 1/2") Washer, Flat (3/16 x 5/8 x 1/16") Bushing, Flange Locknut (1/4-20) Screw, Socket Button Head (1/4-20 x 1-1/4") Screw, Socket Head (1/4-20 x 1/2") Bracket, Vent Tray Decal, Approved Charger and Harness Warning Bracket, Upper Link T-Nut (1/4-20) Locknut (#10-24) Washer, Steel (7/8 x 3/8 x 1/16") Screw, Hex Head Cap w/ Patch (1/4-20 x 1/2") Washer (1/4 x 1/2 x 1/16") 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 1 1 1 1 2 4 2 1 2 2 2 2 2 2 2 2 4 2 4 1 1 2 4 4 2 4 6 164 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com Vent Tray Kit For Extruded & Round Back Canes 16"-22" Wide Seating Systems A Battery Support Bracket Assembly for Vent must be ordered when a chair is equipped with a TRBKTS option Item Number Note Quantity Per Part Number 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 6 6 6 6 6 E NOTE: 1139541 Description Package Assembly Screw, Socket Head Shoulder (1/4 x 1") Screw, Hex Head Cap w/ Patch (1/4-20 x 1/2") Bracket, Seat Vent, Black (20"-22" Wide) Locknut (1/4-20) Washer, Nylon (3/8 x 3/4 x 1/16") Bracket, Vent Tray Attachment Screw, Shoulder (1/4 x 1-1/4") Locknut (1/4-20) Screw, Socket Head Cap (1/4-20 x 5/8") Lockwasher, Split (1/4") Bushing, Flanged Screw, Hex Head Cap with Patch (1/4-20 x 5/8") Bracket, Vent-Connect Upper Right Bracket, Vent-Connect Upper Left Spacer, Coved (5/16 x 29/32 x 7/16") Vent Battery Harness Vent Battery Extension Harness Vent Battery Extension Harness For TRBKTS Option Screw, Phillips Pan Head (#8-16 x 5/8") Cable Tie (5-5/8" Long) Instruction Sheet, Vent Tray Assembly For 16"-22" Wide Systems with Extruded Back Canes Installation Spring, Yellow; EXTRA Heavy Duty Kit, Battery Support Bracket Assembly - For Vent "Option" System w/ 22NF Batteries Screw, Hex Head Cap w/ Patch (1/4-20 x 1/2") Bracket, Battery Support, Black 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 4 2 4 2 2 2 4 4 2 2 4 1 1 4 1 1 1 1 1 1 2 4 1 1 1 2 1 1 1 4 1 A - To view location of individual components for items 2, 3 and 6, see page titled "Battery Tray Assembly, Door and Wire Harnesses For Vent Tray (3) 22NF Batteries" B - To view location of individual components for item 4, see page titled "Vent Tray Assembly without Mounting Hardware" C - To view location of individual components for item 5, see pages titled "Vent Tray Mounting Hardware For Extruded or Round Back Canes" D - Instruction Sheet & HD Springs are Not Shown. E - Not Shown. To view location of individual components, see page titled "Battery Support Bracket Assembly TRBKTS Option" 165 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com Power Wheelchair Tool Kit 166 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com Power Wheelchair Tool Kit Item Number Note 1 Quantity Per Part Number 1125222 Description Package Assembly Kit, Power Wheelchair Tool Includes: 1 ea. Multimeter with Leads 1 ea. Locator, Protractor/Angle Magnetic Base 1 ea. Instructions, MKIV Programmer 1 ea. Wire, Grounding with Hand Strap and Clip 1 ea. Leads, 1" Test 1 ea. Light, Pen with Invacare Logo 1 ea. Tape Measure, Compact with Invacare Logo 1 ea. Screwdriver, Pen-Size Phillips/Flat Head 1 ea. Cable, Virtual Service Charger/Modem 167 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com 1 1 Miscellaneous Accessories 168 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com Miscellaneous Accessories Item Number Note 1 2 3 4 5 B C Quantity Per Part Number 1091505 1091870 1026900 7930333 1090212 3 6 7 8 E,F 1004310 8 E,G 1034625 8 8 E,F E,G 1034625. 1034752 8 D,E 1034745 A 0020200 A A,I A,J A,G 0020300 0143900 0144000 0144100 NOTE: Description Package Assembly Hardware, Seat Positioning Strap Attaching (Pair) Screw, Socket Button Head w/ Patch (1/4-20 x 3/4") Washer (1/4 x 23/32 x 1/16") Locknut (1/4-20) Kit, Chest Positioning Strap Mounting Hardware For Conventional Seating Washer (1/4 x 23/32 x 1/16") Screw, Hex Head Cap w/ Patch (1/4-20 x 1/2") T-Nut (1/4-20) Positioning Strap, Seat/Chest w/ Auto Style Push Button Buckle (Eyelet to Eyelet Length 48") Positioning Strap, Seat/Chest w/ Auto Style Push Button Buckle (Eyelet to Eyelet Length 61") 0 Positioning Strap, Seat/Chest w/ Airline Style Buckle (Eyelet to Eyelet Length 61") Positioning Strap, Seat/Chest w/ Hook and Loop Style Buckle (Eyelet to Eyelet Length 61") Legrest Pad w/ Screws, Otto Bock (6" Wide x 9" High) Adapter Plate, Otto Bock Legrest Pad Flap, Back Pan Tarsys Flap, Back Pan Tarsys Flap, Back Pan Tarsys A - Not Shown B - Includes Items 2-4 C - Includes Items 3, 6, and 7 D - Chest Only E - Positioning strap attaching hardware not included. F - 16-19" Wide G - 20-22' Wide I - 16-17" Wide J - 18-19" Wide 169 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com 2 1 1 2 1 25 2 2 2 1 1 1 1 1 2 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Conversion Kit - 2GR To 2GTR For TDX 170 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com Conversion Kit - 2GR To 2GTR For TDX Item Number Note 1 A,C Quantity Per Part Number 1140348 2 3 4 5 6 7 8 9 9 10 11 12 13 14 15 16 17 19 20 21 22 23 24 24 25 26 27 28 29 30 31 18 NOTE: B 1117258 Description Package Assembly Kit, Conversion - 2GR To 2GTR On TDX For All User Weight Limits Actuator, Tilt - For All User Weight Limits Bushing (3/8 x 5/8 x 1/2") Bolt, Shoulder (3/8 x 2-1/2") Locknut (5/16-18) Bar, Clamp, Black Guide, Short Linear Screw, Socket Flat Head C'sunk with Patch (1/4-20 x 3/4") Screw, Socket Head Cap (5/16-18 x 1") Screw, Socket Head Cap with Patch (5/16-18 x 1-1/4") Screw, Socket Head Shoulder (3/8 x 1-1/2") Locknut (5/16-18) Washer, Flat (5/16 x 5/8 x 1/16") Ring, Retaining (3/8") Washer, Flat (3/8 x 11/16 x 1/16") Washer, Nylon (3/8 x 7/8 x 1/16") Spacer (3/8 x 3/4 x 3/8") Link, Tilt Screw, Set (#8-32 x 3/16") Linkage, Tilt Potentiometer Harness, Tilt Potentiometer with Nut and Washer Screw, Socket Head Cap (#8-32 x 5/8") Washer, Nylon (3/16 x 3/4 x 5/32") Shroud Cover Assembly with Decal, 2GTR Right Shroud Cover Assembly with Decal, 2GTR Left Controller, MK5 T.R.C.M. Locknut (5/16-18) Screw, Socket Head Shoulder (3/8 x 1-1/2") Bushing, Black (7/16 x 1/2 x 11/16") Block, Black Tilt Angle Bolt, Shoulder (3/8 x 2-1/2") Instruction Sheet, Conversion Kit - 2GR To 2GTR Tilt Potentiometer Assembly A - Includes items 2-17, 19-31 and used for all user weight limits B - Includes items 19-23 C - Item number 9 part #1114962 was used before 12/19/05 and part #1108429 is used after 12/18/05 171 Form No. 03-026 To order call toll free 1-800-333-6900, or www.invacare.com 1 1 1 1 1 1 1 1 1 1 2 1 2 2 2 6 1 1 4 4 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 4 4 4 4 8 2 2 1 1 1 1 1 1 1 1 4 4 2 2 2 1 1 Invacare Corporation Yes, you can. ™ One Invacare Way Elyria, Oh USA 44036-2125 800-333-6900 Technical Support 800-832-4707 Florida Technical Support 407-321-5630 www.invacare.com Customer Service 800-333-6900 ©2008 Invacare Corporation. Elyria, Ohio. All rights reserved. Trademarks are identified by the symbols ™ and ®. All trademarks are owned by or licensed to Invacare Corporation unless otherwise noted. Otto Bock is a registered trademark owned by Otto Bock Orthopaedische Industrie GMBH & Co.. JAY Back is a registered trademark of Sunrise Medical HHG, Inc. Corporation (Revised 6/25/08) Form No. 03-026
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No XMP Toolkit : 3.1-702 Modify Date : 2008:06:25 14:29:09-04:00 Create Date : 2008:06:25 14:26:18-04:00 Metadata Date : 2008:06:25 14:29:09-04:00 Format : application/pdf Document ID : uuid:13d9ba2c-02e6-471a-beda-206e7f998ebc Instance ID : uuid:ba016ecc-94a8-4c42-b2a4-e9ef3ea1d217 Page Count : 173EXIF Metadata provided by EXIF.tools