Ives INTRO 2011 Product Catalog Ivescatalog
User Manual: Ives Ives Product Catalog Catalog
Open the PDF directly: View PDF 
.
Page Count: 160
| Download | |
| Open PDF In Browser | View PDF |
Architectural Hardware Products Table of Contents Exterior Hardware F Miscellaneous Hardware G www.ives.ingersollrand.com E Canada 1.905.403.1800 Stops i USA 1.877.671.7011 D G - Miscellaneous Hardware Hooks & Brackets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .G2 - G6 Window Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .G6 - G8 Hobby Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .G9 - G12 Cabinet/Closet Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .G13 - G16 Latches, Catches & Bolts F - Exterior Hardware Lock Guards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .F2 - F4 Door Viewers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .F5 - F6 Door Knockers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .F7 Letter Box/Plates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .F8 Door Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .F9 Storm Door Latch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .F9 Screen Door Pull . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .F10 Crash Stops . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .F10 C E - Stops Floor Stops . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E2 - E5 Floor Stops & Holders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E6 - E8 Wall Bumpers/Stops . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E9 - E14 Wall Holders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E15 Kick Down Holders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E16 - E17 Plunger Door Holders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E17 Roller Bumpers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E19 Residential Door Stops . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E20 - E21 Hinge Pin Stops . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E21 - E22 Silencers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E23 Flush Bolts & Coordinators D - Latches, Catches & Bolts Surface Bolts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .D2 - D6 Door Guards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .D7 Roller Latches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .D8 - D10 Angle Stops . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .D11 Latches/Catches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .D12 - D16 B C - Flush Bolts & Coordinators Flush Bolts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C2 - C11 Coordinators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C12 - C16 Pulls & Plates B - Pulls and Push Plates Pulls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B2 - B8 Push Bars . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B8 - B9 Vandal Resistant Trim . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B10 - B12 Protection Plates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B13 - B14 Mounting Detail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B15 - B17 A A - Hinges and Pivots Architectural Hinges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A2 - A11 Residential Hinges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A12 Continuous Hinges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A13 - A30 Pivots . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A31 - A49 Pocket Pivot/Hinges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A50 Hinges & Pivots page Terms and Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ii-iii Index by Product Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .iv Index by Part Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .v Finish Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .vi-vii Packaging, Handing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .viii Pulls & Plates A B C Flush Bolts & Coordinators Latches, Catches & Bolts E Stops F Exterior Hardware G Miscellaneous Hardware D Hinges & Pivots Terms and Conditions ii however, a security interest will remain in the Products, regardless of mode of attachment INGERSOLL-RAND COMPANY, SECURITY TECHNOLOGIES SECTOR, to realty or other property, until full payment has been made therefore, and Customer GENERAL TERMS AND CONDITIONS OF SALE AND SERVICE agrees, upon request, to do all things and acts necessary to protect Company’s interest by 1. GENERAL. (a) This Agreement contains the terms and conditions by which adequately insuring the Products against loss from damage from any cause and to have Company will quote and sell its Products and Services to Customer. (b) The terms Company named as an additional insured. Copies of all Certificates of Insurance will be “purchase order” or “order” for the purposes of this Agreement include the term “request provided to Company upon request. Customer will also assist Company in providing all and for quotation,” as appropriate. (c) This Agreement supersedes all pre-printed necessary documents or signatures required to file any documents to perfect Company’s boilerplate terms and conditions set forth in any purchase order issued by Customer. interest in such Products. (d) No reference herein to Customer’s purchase order will in any way incorporate (d) Freight Charges . The full cost of freight, via a carrier of our choice, will be are hereby objected to. different or additional terms and which conditions allowed (and prepaid) on shipments of the net dollar amount or more indicated in the (e) ANY ACCEPTANCE BY COMPANY OF CUSTOMER’S PURCHASE ORDER chart below within the United States of America, excluding all territores. IS EXPRESSLY CONDITIONED ON THE CUSTOMER’S ASSENT TO AND Brand Net Dollar Amount ACCEPTANCE OF THE TERMS AND CONDITIONS CONTAINED IN THIS AGREEMENT. (f) In the event of a conflict between this Agreement and a purchase Schlage Mechanical $7,000 order issued by Customer, the terms of this Agreement will prevail. In the event of a Schlage Electronic Security (excluding Biometrics) $7,000 conflict between this Agreement and any specific Product or Service terms and Schlage Biometrics Refer to separate freight terms conditions, the specific Product or Service terms and conditions will prevail. Von Duprin $7,000 2. SCOPE OF PRODUCTS AND SERVICES AND ORDERS. LCN $7,000 (a) Scope of Products and Services. The scope of the Products and Services IR FASTRACK $7,000 (including, but not limited to location) are (i) attached to this Agreement, (ii) separately furnished by Company to Customer, or (iii) subject to Section 1 herein, contained in an Falcon Locks $5,000 order Falcon Exits $5,000 submitted by Customer. Non-standard finishes and special items may be available. Falcon Closers $5,000 Contact Company for such availability. All Products that come in “kits” cannot be sold as individual pieces. See the specific product terms and conditions for exceptions. Falcon FASTRACK $5,000 (b) Orders.All orders submitted by Customer must be in written form acceptable to Ives & Glynn-Johnson $1,000 Company. (c) Receipt of an Order. Company will acknowledge receipt of each order Steelcraft Refer to separate freight terms issued in accordance with this Agreement and will notify Customer whether such order has been accepted or rejected, in whole or in part, by Company. If Company fails to On shipments of the net dollar amount or more to all foreign countries and US territories, acknowledge receipt of an order, within a reasonable time period, such failure to freight will be allowed (and prepaid) to the Port of Embarkation. Shipments under the net acknowledge receipt will be deemed a rejection of the entire order. (d) Changes to dollar amount will be prepaid by Ingersoll Rand and 3.0% of the net invoice amount Orders or Cancellation of Orders . Change order request and Cancellations can be or $10, whichever is greater, will be added to the invoice. All expedited methods of by phone, fax, or email. Changes and Cancellations are allowed without penalty if made shipment, such as 'next day air', will be prepaid by Ingersoll Rand but the entire within 48 hours of order receipt if the order has not shipped. Some exceptions do apply shipping costs will be added to the invoice. Ingersoll Rand will ship as requested, freight please consult the factory. After 48 hours, all changes or cancellations are subject to a collect, if the customer is willing to bear the entire expense and so indicates on the order. charge of 25% of the net product or service value plus the cost of any fabrication or raw Once received by IR, a purchase order cannot be combined with another purchase order materials that have been purchased for the order. Unless otherwise specified by to qualify for freight allowed. In addition the customer may not combine any of the Company in writing, any changes to orders acknowledged by Company that affect the brands or product categories listed above on a single purchase order to qualify for freight delivery date will be deemed a new order and will require acknowledgement by allowed, except in the case of FASTRACK. IR FASTRACK may not be combined with Company as provided in this Section 2. Falcon FASTRACK to qualify for freight allowed. (e) Claims. All claims for loss or damage to Products while in the care, custody, and/or control of a carrier will be the 3.PRICES AND PAYMENT.(a) Prices. The prices specified by Company are subject responsibility of Customer, who will submit any claims. (f) Packing. Company will to change, without notice, to Company’s prices in effect at the time of each shipment of pack, mark, and ship the Products according to its standard procedures for shipment, Products or performance of Services. Additional charges may be applied for product unless the parties agree, in writing, that Company will comply with any special instrucmodification or engineering services. Oral prices specified by Company are null and tions provided by Customer. Compliance with special instructions may result in an void. (b) Invoices. Company will submit invoices to Customer stating amounts due. increased price. (c) Payment Terms.Payment terms are 2% cash discount 20 days, net 35 days from date of invoice. Payment will be made in United States dollars. (d) Credit Terms . All 5.CLAIMS.Claims due to shortages, errors, omissions, damaged goods, or defective orders are subject to Company’s credit limit and terms of credit required by Company material must be submitted within 30 days from the date of the invoice. or contained in Company’s credit application, which is subject to change by Company 6.PRODUCT CHANGES. Company reserves the right to change without notice the at any time either before or after delivery of any part of the order. Company reserves the design of, or the process of manufacturing, the Products covered by this Agreement; right to request payment in advance of shipment or any order or to request adequate provided that the foregoing will not be construed as relieving Company from its assurances for Customer’s payment of an order and may withhold or stop shipment, obligation to deliver Products which conform to the specifications which Company without any liability to Company, until Customer submits payment or assurance of may have furnished to Customer. payment, as required by Company. (e) Default. If Customer is in default in payment or otherwise with respect to any order for Products or Services or any other contract with 7.PRODUCT RETURNS. Purchased material can only be returned to the factory by Company, Company shall have the right, in addition to all other legal remedies and withobtaining Return Material Authorization (RMA) and must be returned to Company within out prejudice to any of its right hereunder, to defer further shipments until such default is 90 days of issuance of the RMA. Returned material must be new, unused, non-obsolete, corrected and to declare all outstanding bills of Customer to be immediately due and and non-specially manufactured and been in Customer’s inventory no more than 180 days payable. (f) Taxes.Any taxes, charges, or duties imposed by any governmental authority from the date of shipment by Company. The RMA number, the original invoice number, on the sale of Products or Services will be paid by Customer, in addition to the selling and the reason for the return must be included in the return. If the company approves the price specified by Company. (g) Late Payment Charge. A late payment charge of return, a credit will be issued to the Customer’s account less freight and a handling charge 1.5% per month equivalent to 18% per annum will be charged on past due balances owed of 35% of the net material on the original invoice. Handling charges may vary depending Company. Provided however, that in the event that applicable governmental law sets a on the condition of the return. The amount of final credit will be determined upon receipt maximum rate for late payment fees which is less than 18% per annum, then the late at the factory and analyzing the condition of the material. Factory retains the right to payment charge assessed will be set at the maximum rate permitted by law. deny credit to anyone for any reason. 4. INSPECTION, DELIVERY, SHIPPING, FREIGHT CHARGES, CLAIMS, 8. AND TECHNICAL INFORMATION AND ADVICE. (a) All designs, data, and PACKING.(a) Inspection. Inspection of Products and Services will be done by specifications provided by Company are proprietary and will not be disclosed or reused Customer immediately after receipt of Products or completion of Services. Inspection of by Customer without the prior written consent of Company. (b) Company assumes no Products or Services by Customer at Company's facility is not permitted. (b) Delivery. obligation or liability for any advice given by Company, the results obtained, or Product delivery schedules are based upon current production capacities, material or damages incurred, and all such advice is given and accepted at Customer’s risk. component availability, and inventory, and may be changed by Company as conditions 9.LIMITED WARRANTY. require. Service delivery schedules are based upon prompt receipt of, and prompt access (a) Company's Standard Limited Warranty(ies) relating to Products or Services to, Customer’s equipment and all information necessary to complete the Services. In no are applicable to this Agreement. The limited warranty(ies) are (i) attached to this event will Product or Service delivery dates be construed as falling within the meaning of Agreement; (ii) separately identified in the specific Product Price Book; or “time is of the essence.” Partial delivery shall be accepted by Customer and paid for at the (iii) separately furnished by Company to Customer. price and on the terms stated herein. Any partial delivery of Products or Services, shall constitute a separate sale and payment shall be separately made when due. If any part of (b) (i) In the event that certain Product warranties are not attached to this Agreement or the Products or Services are not delivered by Company in accordance with Customer’s separately furnished, Company warrants only to Customer that Products will be free from order, this Agreement shall not be affected thereby. (c) Shipping. Unless otherwise defects in material and workmanship for a period of 12 months from the date of shipment specified by Company, (i) where the Customer is located in the United States, all Products of the Products. Company’s sole obligation under this warranty is limited to repairing or will be sold “Uniform Commercial Code, F.O.B. Origin, Company's factory”; and (ii) replacing, at its option, the defective Products. (ii) The provisions of this limited Product where the Customer is located outside of the United States, all Products will be sold warranty do not apply to Products: (A) used for the purposes for which they are not “ Ex-works, Company's factory (Incoterms 2000).” In either instance, title and risk of designed or intended; (B) which have been repaired or altered without Company's prior loss will pass to Customer upon delivery to the carrier at Company's factory. Provided USA 1.877.671.7011 Canada 1.905.403.1800 www.ives.ingersollrand.com Terms and Conditions B Flush Bolts & Coordinators C Latches, Catches & Bolts D Stops E Exterior Hardware F Miscellaneous Hardware G www.ives.ingersollrand.com Pulls & Plates Canada 1.905.403.1800 A iii USA 1.877.671.7011 Hinges & Pivots written consent; (C) which have been subjected to misuse, abuse, negligence, or accident; 16.TERMINATION. (a) This Agreement may be terminated by either party by giving (D) which have been improperly stored, installed, maintained, or operated; (E) which have 30 days' written notice to the other party in the event of failure by such other party to been used in violation of written instructions provided by Company to Customer; (F) fulfill any of its obligations hereunder. However, if during the period of such notice, which have subjected to improper temperature, humidity, or other environmental such other party remedies such failure, this Agreement will continue with the same force conditions; (G) which have been affected by normal wear and tear; or (H) which, based and effect as if such notice had not been given. (b) This Agreement may be terminated on Company's examination, do not disclose to Company's satisfaction nonconformance to upon the written mutual consent of the parties. (c) Either party may immediately the warranty. terminate this Agreement by giving written notice to the other party in the event of the happening of any of the following or any other comparable event: (i) insolvency of the (c) (i) In the event that certain Service warranties are not attached to this Agreement or other party; (ii) filing of a petition in bankruptcy by or against the other party; (iii) separately furnished, Company warrants only to Customer that the Services will be free appointment of a receiver or trustee for the other party; or (iv) execution of an assignment from defects in material and workmanship for a period of 6 months from the date of for the benefit of creditors by the other party, all of which will allow Company to demand completion of the particular items of Service. Company’s sole obligation under this reclamation of all affected orders. (d) Except as provided in this section 16, Customer warranty is limited to repairing or reperformance, at its option, of the Service; provided may not terminate this Agreement, in whole or in part, unless Company’s prior written however, if repair or reperformance is either impractical or impossible, the Company will consent is obtained and Customer agrees to pay all of Company’s cancellation charges. refund to Customer that portion of the price paid to the Company for the defective item 17.GOVERNING LAW; VENUE; AND EXPENSES. (a)This Agreement and any of Service. This warranty only applies if the company is given written notice of the defect disputes or controversies arising hereunder will be governed by and construed according or nonconformance by the Customer within 30 days of discovery. (ii) The provisions of to the internal laws of the State of Indiana, United States of America, without regard to its this limited Service warranty does not apply to any defects or issues with the design or conflict of law principles, and not including the United Nations Convention on Contracts performance of equipment or products not manufactured by Company, nor does it apply for the International Sale of Goods. (b) Jurisdiction and venue with respect to any action, to any code compliance or permit requirements for the assembly, installation, erection, proceeding, or suit in connection with this Agreement will reside in the courts of the State or construction of any goods. of Indiana. (c) Customer agrees to pay for all expenses (including attorney’s fees) incurred (d) NO OTHER WARRANTIES, EXPRESS OR IMPLIED, ARE MADE WITH by Company in enforcing the obligations of Customer under this Agreement. RESPECT TO THE PRODUCTS OR SERVICES INCLUDING, BUT NOT 18.COMPLIANCE WITH LAWS, EXPORT CONTROLS, CERTIFICATIONS, LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FIT AND NUCLEAR LIABILITY . (a) This Agreement is be subject to, and Company NESS FOR A PARTICULAR PURPOSE. and Customer will comply with, all laws and export controls, regulations, rules, orders, (e) The following costs and expenses are not covered by the provisions of these limited licenses, requirements, and governmental requests now or hereafter in effect in the United warranties: (i) labor costs for the removal and reinstallation of Products or other States of America that pertain to the Products or the initial sale of the Products or that manufacturer’s products; (ii) shipping and freight expenses required to return Products to pertain to Services. Provided however , Company is not responsible for obtaining or Company; (iii) normal maintenance; and (iv) economic losses. In addition, the provisions maintaining any permits for the performance of Services or the verification or compliance of this warranty are not applicable to anything other than defects in Company’s material with any code requirements relative to the performance of Services. To the extent any (products only) or workmanship. sale of Products or Services pursuant to this Agreement may require approval of the U.S. 10.CUSTOMER’S REMEDIES.THE CUSTOMER’S EXCLUSIVE AND Government, Company’s obligations under this Agreement are conditioned upon the SOLE REMEDY ON ACCOUNT OF, OR IN RESPECT OF, THE FURNISHING grant of such approval and upon compliance by Customer with any restrictions imposed OF PRODUCTS OR SERVICES THAT DO NOT CONFORM TO THIS by the U.S. Government in connection with such approval. (b) Certain Products are noted AGREEMENT WILL BE TO (A) SECURE REPAIR OR REPLACEMENT OF by Company as tested by independent laboratories for compliance with UL and/or ANSI THE PRODUCTS; OR (B) SECURE REPAIR OR REPERFORMANCE OF THE standards. Any and all modifications or alterations to such Products will void such SERVICES OR TO OBTAIN A REFUND OF THE PRICE PAID FOR THE certification, and Company is not liable to Customer to certify any modified or altered DEFECTIVE SERVICE, ALL AT COMPANY S OPTION. IN NO EVENT WILLProduct. (c) In the event the Products are to be used in a nuclear facility, the Customer THE COMPANY’S MAXIMUM LIABILITY EXCEED THE SELLING PRICE shall, prior to such use, arrange for insurance or governmental indemnity protecting FOR THE PRODUCTS OR ITEM OF SERVICE. Company against liability. The Customer hereby releases and agrees to indemnify 11.LIMITATION OF LIABILITY. IN NO EVENT WILL COMPANY BE LIABLE Company and its suppliers for any nuclear damage including, but not limited to, loss of use, in any manner arising out of the nuclear incident, whether alleged to be due, FOR INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE DAMAGES INCLUDING, BUT NOT LIMITED TO, LOSS OF USE OF THE in whole or in part by Company or its suppliers. PRODUCTS, SERVICE INTERRUPTION, LOSS OF PROFITS, LOSS OF- REV19. NO INDUCEMENTS.The parties hereto represent to each other and each agrees ENUE, INTEREST, LOST GOODWILL, WORK STOPPAGE, that, neither it nor any person acting on its behalf has, in contravention of any applicable IMPAIRMENT OF OTHER GOODS, LOSS BY REASON OF SHUTDOWN OR law, given or offered to give, or will give or offer to give, any sum of money or other NON-OPERATION, INCREASED EXPENSES OF OPERATION, OR CLAIMS material consideration to any person, directly or indirectly, as an inducement to obtain OF CUSTOMER’S CUSTOMERS, WHETHER BASED ON CONTRACT, business hereunder or to influence the granting of licenses or other governmental WARRANTY, TORT (INCLUDING, BUT NOT LIMITED TO, STRICT permissions to enter into this Agreement or perform obligations hereunder. LIABILITY OR NEGLIGENCE), PATENT INFRINGEMENT, OR OTHERWISE, 20. SEVERABILITY. If any provision of this Agreement is held to be invalid, illegal, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. or unenforceable under any statute, regulation, ordinance, executive order, or other rule 12.STATUTE OF LIMITATIONS.NO ACTION ARISING OUT OF ANY of law, that provision will be deemed severed to the extent necessary to comply with such CLAIMED BREACH OF THIS AGREEMENT BY COMPANY MAY BE statute, regulation, ordinance, order, or rule. In the event such provision is deemed BROUGHT BY CUSTOMER MORE THAN ONE (1) YEAR AFTER THE severed, the parties will negotiate in good faith to arrive at an alternative arrangement CAUSE OF ACTION HAS ARISEN. approximating the original business objective of the parties. The remaining terms and conditions of this Agreement will remain in effect. 13.CONSUMER PRODUCTS. With respect to “consumer products” as defined under the Magnuson-Moss Warranty Act (“MMWA”), the following statements are made. 21.NO IMPLIED WAIVER. The failure of either party at any time to require (a) Some states do not allow limitations on how long an implied warranty lasts, so the performance by the other party of any provision of this Agreement will in no way affect above limitation may not apply to you. IF ANY IMPLIED WARRANTY IS the right to require such performance at any time thereafter, nor will the waiver of either PROVIDED UNDER THE MMWA, IT IS LIMITED TO THE DURATION OF party of a breach of any provision of this Agreement constitute a waiver of any succeeding THE WARRANTY PROVIDED IN SECTION 9 ABOVE.(b) Some states do not breach of the same or any other provision. allow the exclusion or limitation of incidental or consequential damages, so the above lim22. MISCELLANEOUS. (a) This Agreement does not constitute either party the agent itation or exclusion may not apply to you. (c) This warranty gives you specific legal rights or legal representative of the other party. Neither party is authorized to create any and you may also have other rights which vary from state to state. obligation on behalf of the other party including, but not limited to, the obligation for 14.FORCE MAJEURE. Any delay or failure of Company to perform its obligations payment of any service or warranty obligation hereunder. (b) Neither this Agreement nor hereunder will be excused to the extent that it is caused by an event or occurrence beyond any right or obligation hereunder may be transferred or assigned by either party without its control such as, by way of example and not by way of limitation, acts of God, actions the prior written approval of the other party, except that Company can transfer or assign by any governmental authority (whether valid or invalid), governmental laws and this Agreement or any right or obligation (including, but not limited to the right to receive regulations not presently in effect, fires, floods, windstorms, explosions, riots, natural payments for any orders) to Ingersoll-Rand Company or an Ingersoll-Rand Company disasters, wars, sabotage, accidents, labor problems (including, but not limited to, entity without first obtaining Customer’s consent. (c) The rights and remedies herein lockouts, strikes, and slowdowns) at Company's facility, its source plant or their suppliers, reserved to Company will be cumulative and additional to any other or further rights and inability to obtain power, material, labor equipment, or transportation, or court injunction remedies provided at law or equity. (d) Customer does not have the right to setoff or to or order. The delivery date will be extended for a time equal to that of the delay and the back charge against any amounts which become payable to Company under this schedule for Company’s performance will be deemed adjusted in the individual order(s) Agreement or otherwise. (e) The official text of this Agreement is in the English language. to that effect. If this Agreement is translated into another language, the English text will govern any question with respect to interpretation. (f) The headings in this Agreement are for 15.ENTIRE AGREEMENT AND AMENDMENT . This Agreement, together with convenience of reference only and do not affect the meaning of this Agreement in any any attachments or supplements specifically referenced in this Agreement, constitutes the manner. entire agreement between the parties hereto and supersedes all previous communications, representations, or agreements, either oral or written, between the parties hereto with 23.DEFINITIONS. (a) Agreementmeans Ingersoll-Rand Company, Security respect to the subject matter hereof. No agreement or understanding varying or expanding Technologies Sector Terms and Conditions of Sale and Service. (b) “Company ” means this Agreement will be binding upon either party hereto unless it is in writing and signed Ingersoll-Rand Company, Security Technologies Sector. (c) Customermeans the by a duly authorized representative thereof. Buyer. (d) Buyermeans the purchaser of products or Services from Company. A B Pulls & Plates Flush Bolts & Coordinators C D Latches, Catches & Bolts Stops E F Exterior Hardware Miscellaneous Hardware G Hinges & Pivots Index by Product Description A G Angle Stop . . . . . . . . . . . . . . . . . .D11 Automatic Flush Bolt . . . . .C2, C3, C4 Automatic Wall Holder . . . . . . . . .E15 Auxiliary Pusher . . . . . . . . . . . . . .D12 Gravity Coordinator . . . . . . . . . . .C14 H Carry Bar . . . . . . . . . . . . . . . . . . . .C14 Casement Adjuster . . . . . . . . . . . . .G8 Casement Fastener . . . . . . . . .G7, G8 Ceiling Hook . . . . . . . . . . . . . . . . .G4 Chain Door Guard . . . . . . . . . . . . .D7 Chest Handle . . . . . . . . . . . . . . . .G12 Closet Pole Socket . . . . . . . . . . . . .G6 Coat & Hat Hook . . . . . . . . . .G3, G4 Constant Latching Flush Bolt . . . . .C5 Coordinator, Bar . . . . . . . . . . . . . .C12 Coordinator, Filler Bar . . . . . . . . .C12 Coordinator, Mounting Bracket . .C13 Crash Stop . . . . . . . . . . . . . . . . . .F10 Handrail Bracket . . . . . . . . . . . . . . .G2 Hasp . . . . . . . . . . . . . . . . . . . . . . .G10 Hinge Pin Stop . . . . . . . . . . .E21, E22 Hinge, 3 Knuckle, Full Mortise . . . . . . . . . . . . . . .A5, A6 Hinge, 5 Knuckle, Full Mortise . . . . . . . . .A6, A7, A8, A9 Hinge, 5 Knuckle, Half Surface . .A10 Hinge, Continuous Pin & Barrel Full Mortise . . . . . . .A28 Hinge, Continuous Geared Full Surface . . . . . . . . . . . . .A19, A20 Hinge, Continuous Geared Half Surface . . . . . . . . . . . . .A21, A22 Hinge, Continuous Pin & Barrel Full Mortise, Full Wrap . . . .A29, A30 Hinge, Continuous Pin & Barrel Swing Clear . . . . . . . . . . . . . . . . .A29 Hinge, Electrifies . . . . . . . . . . . . .A11 Hinge, Pocket . . . . . . . . . . . . . . .A52 Hinge, Residential . . . . . . . . . . . .A12 Hobbyist Barrel Bolt . . . . . . . . . . . .G9 Holder, Kick Down . . . . . . . .E16, E17 Hook and Hasp . . . . . . . . . . . . . .G11 Hook and Staple . . . . . . . . . . . . . .G9 D I Decorative Corner . . . . . . . . . . . .G11 Decorative Hasp . . . . . . . . . . . . . .G10 Decorative Hinge . . . . . . . . . . . . .G10 Door Base Stop, Residential E20, E21 Door Bolt, Dutch . . . . . . . . . . . . . .D6 Door Bolt, Mortise . . . . . . . . . . . . .D6 Door Guard, Chain . . . . . . . . . . . . .D7 Door Guard, Solid Bar . . . . . . . . . .D7 Door Knocker . . . . . . . . . . . . . . . . .F7 Door Numbers . . . . . . . . . . . . . . . .F9 Door Pull . . . . . . . . . . .B2, B3, B4, B5 Door Pull, Offset . . . . . . . . . . . . . .B5 Door Silencer . . . . . . . . . . . . . . . .E23 Draw Catch . . . . . . . . . . . . . . . . . .G12 Dust Proof Strike . . . . . . . . . . . . .C11 Dutch Door Bolt . . . . . . . . . . . . . .D6 Invisible Latch . . . . . . . . . . . . . . .D12 B Ball Catch . . . . . . . . . . . . . .D13, D16 Ball Catch, Adjustable . . . . . . . . .D16 Ball Catch, Dual Adjustable . . . . .D16 Bar Coordinator . . . . . . . . . . . . . .C12 Bar Window Lift . . . . . . . . . . . . . . .G7 Bracket . . . . . . . . . . . . . . . . . . . . .G12 Broad Butt Hinge . . . . . . . . . . . . . .G9 C E Protection Plates . . . . . . . . . . . . .B13 Pull Plate . . . . . . . . . . . . . . . .B7, B8 Pull Plate (less pull) . . . . . . . . . . . .B6 Push Bar . . . . . . . . . . . . . . . . . . . . .B8 Push Bar with Pull . . . . . . . . . . . . .B9 Push Plate . . . . . . . . . . . . . . . . . . .B6 R Riser . . . . . . . . . . . . . . . . . . . . .E2, E4 Roller Bumper . . . . . . . . . . . . . . . .E19 Roller Catch . . . . . . . . . . . . . . . . .D15 Roller Latch . . . . . . . . . .D8, D9, D10 S Screen Door Pull . . . . . . . . . . . . . .F10 Side Window Lock . . . . . . . . . . . . .G7 Slide Door Edge Pull . . . . . . . . . .G15 Sliding Door Pull . . . . . . . . . . . . .G16 Solid Bar Door Guard . . . . . . . . . . .D7 Stop, Crash . . . . . . . . . . . . . . . . . .F10 Stop, Hinge Pin . . . . . . . . . .E21, E22 Strike Plate . . . . . . . . . . . . . . . . . .D10 Strike, Dust Proof . . . . . . . . . . . . .C11 Storm Door Latch . . . . . . . . . . . . . .F9 Support Hinge . . . . . . . . . . . . . . .G11 Surface Bolt . . . . . . . . . . . . . . .D2, D3 Surface Bolt, Decorative . . . . .D4, D5 V Vandal Resistant Trim .B10, B11, B12 Viewer, One Way . . . . . . . . . . .F5, F6 W K Kick Down Holder . . . . . . . .E16, E17 Knocker, Door . . . . . . . . . . . . . . . . .F7 L Letter Box Plate . . . . . . . . . . . . . . .F8 Letter Box Sleeve . . . . . . . . . . . . . .F8 Lock Guard . . . . . . . . . . . . .F2, F3, F4 Wall Bumper . . . . . . . . . . . . .E11, E12 Wall Holder, Automatic . . . . . . . . .E15 Wall Holder, Manual . . . . . . . .E9, E14 Wall Stop . . . . . . . . . . . .E9, E10, E14 Wardrobe Hook . . . . . . . . . . . . . . .G5 Window Lock . . . . . . . . . . . . . . . . .G6 M Magnetic Catch . . . . . . . . . . . . . .D14 Manual Flush BoltC6, C7, C8, C9, C10 Manual Wall Holder . . . . . . . .E9, E14 Middle Butt Hinge . . . . . . . . . . . . .G9 Mortise Door Bolt . . . . . . . . . . . . .D6 Mounting Brackets . . . . . . . . . . . .C13 Elbow Catch . . . . . . . . . . . . . . . . .G13 N F Filler Bar . . . . . . . . . . . . . . . . . . . .C12 Finger Pull . . . . . . . . . . . . . . . . . .G13 Flexible Door Stop, ResidentialE20, E21 Floor Stop . . . . . . . . . .E2, E3, E4, E5 Floor Stop & Automatic Holder E6, E8 Floor Stop & Manual Holder . . . . .E7 Floor Stop & Semi-automatic HolderE6 Flush Bolt, Automatic . . . .C2, C3, C4 Flush Bolt, Constant Latching . . . .C5 Flush Bolt, ManualC6, C7, C8, C9, C10 Flush Pull . . . . . . . . . . . . . . .G13, G14 Friction Lid Support . . . . . . . . . . .G11 Numbers, Door . . . . . . . . . . . . . . . .F9 P Pivot, 1/2" Offset . . . . . . . .A43, A44 Pivot, 3/4" Offset A36, A37, A38, A39, A40, A41, A42 Pivot, Center Hung A45, A46, A47, A48 Pivot, Intermediate . . . . . . .A49, A50 Pivot, Intermediate, Electrified . .A51 Pivot, Pocket . . . . . . . . . . . . . . . .A52 Pocket Sliding Door Bolt . . . . . . .G15 iv USA 1.877.671.7011 Canada 1.905.403.1800 www.ives.ingersollrand.com Nurmerical Part Index Latches, Catches & Bolts D Stops E Exterior Hardware F Miscellaneous Hardware G www.ives.ingersollrand.com C Canada 1.905.403.1800 Flush Bolts & Coordinators v USA 1.877.671.7011 B 7226, 7226F . . . . . . . . . . . . . . . . .A37 7227, 7227F . . . . . . . . . . . . . . . . .A38 7230F . . . . . . . . . . . . . . . . . . . . . .A39 7230F-7237F INT . . . . . . . . . . . .A48 7237F . . . . . . . . . . . . . . . . . . . . . .A40 7244F . . . . . . . . . . . . . . . . . . . . . .A41 7244F-7245F INT . . . . . . . . . . . .A48 7245F . . . . . . . . . . . . . . . . . . . . . .A42 7253 . . . . . . . . . . . . . . . . . . . . . . .A43 7255 . . . . . . . . . . . . . . . . . . . . . . .A44 7255J . . . . . . . . . . . . . . . . . . . . . .A44 7256 . . . . . . . . . . . . . . . . . . . . . . .A45 7259 . . . . . . . . . . . . . . . . . . . . . . .A46 8102 . . . . . . . . . . . . . . . . . . . . . . . .B2 8103 . . . . . . . . . . . . . . . . . . . . . . . .B2 8103EZ . . . . . . . . . . . . . . . . . . . . . .B3 8105 . . . . . . . . . . . . . . . . . . . . . . . .B3 8111-5 . . . . . . . . . . . . . . . . . . . . . .B4 8112-5 . . . . . . . . . . . . . . . . . . . . . .B4 8121 . . . . . . . . . . . . . . . . . . . . . . . .B5 8190 . . . . . . . . . . . . . . . . . . . . . . . .B5 8200 . . . . . . . . . . . . . . . . . . . . . . . .B6 8300 . . . . . . . . . . . . . . . . . . . . . . . .B6 8302 . . . . . . . . . . . . . . . . . . . . . . . .B7 8303 . . . . . . . . . . . . . . . . . . . . . . . .B7 8305 . . . . . . . . . . . . . . . . . . . . . . . .B7 8311 . . . . . . . . . . . . . . . . . . . . . . . .B8 8400 . . . . . . . . . . . . . . . . . . . . . . .B13 8402 . . . . . . . . . . . . . . . . . . . . . . .B13 9011 . . . . . . . . . . . . . . . . . . . . . . . .G9 9031 . . . . . . . . . . . . . . . . . . . . . . . .G9 9041 . . . . . . . . . . . . . . . . . . . . . . . .G9 9042 . . . . . . . . . . . . . . . . . . . . . . . .G9 9070 . . . . . . . . . . . . . . . . . . . . . . .G10 9071 . . . . . . . . . . . . . . . . . . . . . . .G10 9072 . . . . . . . . . . . . . . . . . . . . . . .G10 9100 . . . . . . . . . . . . . . . . . . . . . . . .B8 9103EZ . . . . . . . . . . . . . . . . . . . . . .B9 9110 . . . . . . . . . . . . . . . . . . . . . . .G10 9120 . . . . . . . . . . . . . . . . . . . . . . .G10 9130 . . . . . . . . . . . . . . . . . . . . . . .G11 9190 . . . . . . . . . . . . . . . . . . . . . . . .B9 9210 . . . . . . . . . . . . . . . . . . . . . . .G11 9212 . . . . . . . . . . . . . . . . . . . . . . .G11 9220 . . . . . . . . . . . . . . . . . . . . . . .G11 9311 . . . . . . . . . . . . . . . . . . . . . . .G11 9320 . . . . . . . . . . . . . . . . . . . . . . .G12 9321 . . . . . . . . . . . . . . . . . . . . . . .G12 9330 . . . . . . . . . . . . . . . . . . . . . . .G12 9340 . . . . . . . . . . . . . . . . . . . . . . .G12 91105F . . . . . . . . . . . . . . . . . . . . .A50 91105F-PT . . . . . . . . . . . . . . . . . .A50 Pulls & Plates FS448 . . . . . . . . . . . . . . . . . . . . . . .E5 WS449 . . . . . . . . . . . . . . . . . . . . .E14 FS450 . . . . . . . . . . . . . . . . . . . . . . .E7 FS452 . . . . . . . . . . . . . . . . . . . . . .E15 SB453 . . . . . . . . . . . . . . . . . . . . . . .D2 FS455 . . . . . . . . . . . . . . . . . . . . . .E15 FB457 . . . . . . . . . . . . . . . . . . . . . . .C9 FB458 . . . . . . . . . . . . . . . . . . . . . .C10 FB458 . . . . . . . . . . . . . . . . . . . . . .C10 RB470 . . . . . . . . . . . . . . . . . . . . . .E19 RB471 . . . . . . . . . . . . . . . . . . . . . .E19 RB472 . . . . . . . . . . . . . . . . . . . . . .E19 481 . . . . . . . . . . . . . . . . . . . . . . . . .D7 482 . . . . . . . . . . . . . . . . . . . . . . . . .D7 FS495 . . . . . . . . . . . . . . . . . . . . . .E8 FS496 . . . . . . . . . . . . . . . . . . . . . . .E8 FS497 . . . . . . . . . . . . . . . . . . . . . . .E8 FS544 . . . . . . . . . . . . . . . . . . . . . .E17 FS555 . . . . . . . . . . . . . . . . . . . . . .E17 571 . . . . . . . . . . . . . . . . . . . . . . . . .G3 572 . . . . . . . . . . . . . . . . . . . . . . . . .G3 574 . . . . . . . . . . . . . . . . . . . . . . . . .G4 575 . . . . . . . . . . . . . . . . . . . . . . . . .G4 580 . . . . . . . . . . . . . . . . . . . . . . . . .G4 581 . . . . . . . . . . . . . . . . . . . . . . . . .G5 582 . . . . . . . . . . . . . . . . . . . . . . . . .G5 585 . . . . . . . . . . . . . . . . . . . . . . . . .G6 586 . . . . . . . . . . . . . . . . . . . . . . . . .G6 600, 700 . . . . . . . . . . . . . . . . . . . .A27 601 . . . . . . . . . . . . . . . . . . . . . . . . .F8 602, 702 . . . . . . . . . . . . . . . . . . . .A27 611, 711 . . . . . . . . . . . . . . . . . . . .A28 620 . . . . . . . . . . . . . . . . . . . . . . . . .F8 STK685 . . . . . . . . . . . . . . . . . . . .D10 STK685L . . . . . . . . . . . . . . . . . . .D10 U696 . . . . . . . . . . . . . . . . . . . . . . . .F5 698 . . . . . . . . . . . . . . . . . . . . . . . . .F5 U698 . . . . . . . . . . . . . . . . . . . . . . . .F5 700 . . . . . . . . . . . . . . . . . . . . . . . .A27 700 . . . . . . . . . . . . . . . . . . . . . . . . .F6 U700 . . . . . . . . . . . . . . . . . . . . . . . .F6 701 . . . . . . . . . . . . . . . . . . . . . . . . .F6 U701 . . . . . . . . . . . . . . . . . . . . . . . .F6 702 . . . . . . . . . . . . . . . . . . . . . . . .A27 705 . . . . . . . . . . . . . . . . . . . . . . . .A28 711 . . . . . . . . . . . . . . . . . . . . . . . .A28 715 . . . . . . . . . . . . . . . . . . . . . . . .A29 VR810-DT . . . . . . . . . . . . . . . . . .B10 VR810-NL . . . . . . . . . . . . . . . . . .B10 VR814-DT . . . . . . . . . . . . . . . . . .B10 VR814-NL . . . . . . . . . . . . . . . . . .B10 AS895 . . . . . . . . . . . . . . . . . . . . .D11 VR900 . . . . . . . . . . . . . . . . . . . . .B11 VR900LLP . . . . . . . . . . . . . . . . . .B11 VR910-DT . . . . . . . . . . . . . . . . . .B12 VR910M-DT . . . . . . . . . . . . . . . . .B12 VR910M-NL . . . . . . . . . . . . . . . . .B12 VR910-NL . . . . . . . . . . . . . . . . . .B12 980 . . . . . . . . . . . . . . . . . . . . . . . . .F9 990 . . . . . . . . . . . . . . . . . . . . . . . .G16 991 . . . . . . . . . . . . . . . . . . . . . . . .G16 1010 . . . . . . . . . . . . . . . . . . . . . . .A12 1011 . . . . . . . . . . . . . . . . . . . . . . .A12 1012 . . . . . . . . . . . . . . . . . . . . . . .A12 1020 . . . . . . . . . . . . . . . . . . . . . . .A12 1021 . . . . . . . . . . . . . . . . . . . . . . .A12 RL1152 . . . . . . . . . . . . . . . . . . . .D10 FS1153 . . . . . . . . . . . . . . . . . . . . .E18 FS1154 . . . . . . . . . . . . . . . . . . . . .E18 SB1600 . . . . . . . . . . . . . . . . . . . . . .D3 SB1601M1 . . . . . . . . . . . . . . . . . . .D3 SB1601M2 . . . . . . . . . . . . . . . . . . .D3 02-3107, . . . . . . . . . . . . . . . . . . . . .F8 02/25 . . . . . . . . . . . . . . . . . . . . . . .F7 7212 . . . . . . . . . . . . . . . . . . . . . . .A34 7212-7212V-7222 INT . . . . . . . .A47 7212V . . . . . . . . . . . . . . . . . . . . . .A34 7215, 7215F . . . . . . . . . . . . . . . . .A35 7215-7226-7227 INT . . . . . . . . .A47 7215F-7226F-7227F INT . . . . . .A47 7215PT-7226PT-7227PT . . . . . .A49 7222 . . . . . . . . . . . . . . . . . . . . . . .A36 A WS45X . . . . . . . . . . . . . . . . . . . . .E15 046HD . . . . . . . . . . . . . . . . . . . . .A19 S48 . . . . . . . . . . . . . . . . . . . . . . . . .D6 FB51 . . . . . . . . . . . . . . . . . . . . . . . .C4 COR52 . . . . . . . . . . . . . . . . . . . . .C12 FB52 . . . . . . . . . . . . . . . . . . . . . . . .C4 053HD . . . . . . . . . . . . . . . . . . . . .A22 FB53 . . . . . . . . . . . . . . . . . . . . . . . .C4 054, . . . . . . . . . . . . . . . . . . . . . . . .D6 054HD . . . . . . . . . . . . . . . . . . . . .A22 59 . . . . . . . . . . . . . . . . . . . . . . . . . .G2 059, . . . . . . . . . . . . . . . . . . . . . . . .G2 60 . . . . . . . . . . . . . . . . . . . . . . . . .E20 060, . . . . . . . . . . . . . . . . . . . . . . .E20 COR60 . . . . . . . . . . . . . . . . . . . . .C12 61 . . . . . . . . . . . . . . . . . . . . . . . . .E20 061, . . . . . . . . . . . . . . . . . . . . . . .E20 FB61 . . . . . . . . . . . . . . . . . . . . . . . .C5 FB62 . . . . . . . . . . . . . . . . . . . . . . . .C5 63 . . . . . . . . . . . . . . . . . . . . . . . . .E21 64 . . . . . . . . . . . . . . . . . . . . . . . . .E21 SR64 . . . . . . . . . . . . . . . . . . . . . . .E23 SR65 . . . . . . . . . . . . . . . . . . . . . . .E23 WS65 . . . . . . . . . . . . . . . . . . . . . .E10 66 . . . . . . . . . . . . . . . . . . . . . . . . . .G8 066 . . . . . . . . . . . . . . . . . . . . . . . . .G7 SR66 . . . . . . . . . . . . . . . . . . . . . . .E23 69 . . . . . . . . . . . . . . . . . . . . . . . . .E21 70 . . . . . . . . . . . . . . . . . . . . . . . . .E22 71 . . . . . . . . . . . . . . . . . . . . . . . . . .G8 72 . . . . . . . . . . . . . . . . . . . . . . . . .E22 COR72 . . . . . . . . . . . . . . . . . . . . .C12 73 . . . . . . . . . . . . . . . . . . . . . . . . .E22 78 . . . . . . . . . . . . . . . . . . . . . . . . . .G9 86 . . . . . . . . . . . . . . . . . . . . . . . . . .G9 90 . . . . . . . . . . . . . . . . . . . . . . . . . .G7 112HD . . . . . . . . . . . . . . . . . . . . .A21 CS115 . . . . . . . . . . . . . . . . . . . . . .F10 157HD . . . . . . . . . . . . . . . . . . . . .A21 159 . . . . . . . . . . . . . . . . . . . . . . . . .G2 210HD . . . . . . . . . . . . . . . . . . . . .A22 218 . . . . . . . . . . . . . . . . . . . . . . . .G13 221 . . . . . . . . . . . . . . . . . . . . . . . .G14 222 . . . . . . . . . . . . . . . . . . . . . . . .G14 223 . . . . . . . . . . . . . . . . . . . . . . . .G14 224HD . . . . . . . . . . . . . . . . . . . . .A22 227 . . . . . . . . . . . . . . . . . . . . . . . .G15 230 . . . . . . . . . . . . . . . . . . . . . . . .G15 253 . . . . . . . . . . . . . . . . . . . . . . . . .D5 261 . . . . . . . . . . . . . . . . . . . . . . . . .C6 262 . . . . . . . . . . . . . . . . . . . . . . . . .C6 265 . . . . . . . . . . . . . . . . . . . . . . . . .C7 325 . . . . . . . . . . . . . . . . . . . . . . . .D14 326 . . . . . . . . . . . . . . . . . . . . . . . .D14 327 . . . . . . . . . . . . . . . . . . . . . . . .D14 330 . . . . . . . . . . . . . . . . . . . . . . . .D15 335 . . . . . . . . . . . . . . . . . . . . . . . .D15 336 . . . . . . . . . . . . . . . . . . . . . . . .D15 345 . . . . . . . . . . . . . . . . . . . . . . . .D16 347 . . . . . . . . . . . . . . . . . . . . . . . .D16 349 . . . . . . . . . . . . . . . . . . . . . . . .D16 FB358 . . . . . . . . . . . . . . . . . . . . . . .C8 SB360 . . . . . . . . . . . . . . . . . . . . . . .D2 WS401 . . . . . . . . . . . . . . . . . . . . .E11 WS402 . . . . . . . . . . . . . . . . . . . . .E11 WS404CVX . . . . . . . . . . . . . . . . . .E11 405 . . . . . . . . . . . . . . . . . . . . . . . . .G3 WS406 . . . . . . . . . . . . . . . . . . . . .E12 WS407 . . . . . . . . . . . . . . . . . . . . .E12 411R . . . . . . . . . . . . . . . . . . . . . . .E13 430 . . . . . . . . . . . . . . . . . . . . . . . . .E4 FS434 . . . . . . . . . . . . . . . . . . . . . . .E3 R435 . . . . . . . . . . . . . . . . . . . . . . . .E4 FS436 . . . . . . . . . . . . . . . . . . . . . . .E4 R437 . . . . . . . . . . . . . . . . . . . . . . . .E4 FS438 . . . . . . . . . . . . . . . . . . . . . . .E4 FS441 . . . . . . . . . . . . . . . . . . . . . .E5 WS443 . . . . . . . . . . . . . . . . . . . . .E14 FS444 . . . . . . . . . . . . . . . . . . . . . . .E5 WS445 . . . . . . . . . . . . . . . . . . . . .E14 FS446 . . . . . . . . . . . . . . . . . . . . . . .E7 WS447 . . . . . . . . . . . . . . . . . . . . .E14 Hinges & Pivots CB1 . . . . . . . . . . . . . . . . . . . . . . . .C14 DP1 . . . . . . . . . . . . . . . . . . . . . . .C11 LG1 . . . . . . . . . . . . . . . . . . . . . . . . .F2 MB1 . . . . . . . . . . . . . . . . . . . . . . .C13 MB1F . . . . . . . . . . . . . . . . . . . . . .C13 MB1V . . . . . . . . . . . . . . . . . . . . . .C13 2 . . . . . . . . . . . . . . . . . . . . . . . . . .G13 DP2 . . . . . . . . . . . . . . . . . . . . . . .C11 MB2 . . . . . . . . . . . . . . . . . . . . . . .C13 MB2F . . . . . . . . . . . . . . . . . . . . . .C13 MB2V . . . . . . . . . . . . . . . . . . . . . .C13 3CB1 . . . . . . . . . . . . . . . . . . . . . . . .A5 3CB1HW . . . . . . . . . . . . . . . . . . . . .A6 3PB1 . . . . . . . . . . . . . . . . . . . . . . . .A5 3SP1 . . . . . . . . . . . . . . . . . . . . . . . .A6 MB1F . . . . . . . . . . . . . . . . . . . . . .C13 MB3F . . . . . . . . . . . . . . . . . . . . . .C13 MB3V . . . . . . . . . . . . . . . . . . . . . .C13 5BB1 . . . . . . . . . . . . . . . . . . . . . . . .A7 5BB1HW . . . . . . . . . . . . . . . . . . . . .A8 5BB1SC . . . . . . . . . . . . . . . . . . . .A10 5BB1SCHW . . . . . . . . . . . . . . . . .A10 5BB1WT . . . . . . . . . . . . . . . . . . . . .A8 5BB4 . . . . . . . . . . . . . . . . . . . . . . . .A9 5BB4HW . . . . . . . . . . . . . . . . . . . . .A9 5PB1 . . . . . . . . . . . . . . . . . . . . . . . .A7 07, . . . . . . . . . . . . . . . . . . . . . . . . .G6 COR7G . . . . . . . . . . . . . . . . . . . . .C14 LB7 . . . . . . . . . . . . . . . . . . . . . . . . .F2 FS9 . . . . . . . . . . . . . . . . . . . . . . . . .E6 COR9G . . . . . . . . . . . . . . . . . . . . .C14 LG10 . . . . . . . . . . . . . . . . . . . . . . . .F2 CL11 . . . . . . . . . . . . . . . . . . . . . . .D12 LG11 . . . . . . . . . . . . . . . . . . . . . . . .F3 WS11 . . . . . . . . . . . . . . . . . . . . . . .E9 WS11X . . . . . . . . . . . . . . . . . . . . . .E9 CL12 . . . . . . . . . . . . . . . . . . . . . . .D12 LG12 . . . . . . . . . . . . . . . . . . . . . . . .F3 FS13 . . . . . . . . . . . . . . . . . . . . . . . .E2 LG13 . . . . . . . . . . . . . . . . . . . . . . . .F4 CL14 . . . . . . . . . . . . . . . . . . . . . . .D12 LG14 . . . . . . . . . . . . . . . . . . . . . . . .F4 R14 . . . . . . . . . . . . . . . . . . . . . . . . .E2 FS17 . . . . . . . . . . . . . . . . . . . . . . . .E2 AS18 . . . . . . . . . . . . . . . . . . . . . .D11 FS18L . . . . . . . . . . . . . . . . . . . . . . .E3 FS18S . . . . . . . . . . . . . . . . . . . . . . .E3 FL20 . . . . . . . . . . . . . . . . . . . . . . .C12 WS20 . . . . . . . . . . . . . . . . . . . . . . .E9 WS20X . . . . . . . . . . . . . . . . . . . . . .E9 CL21 . . . . . . . . . . . . . . . . . . . . . . .D13 CL21A . . . . . . . . . . . . . . . . . . . . .D13 22 . . . . . . . . . . . . . . . . . . . . . . . . .G13 CL22 . . . . . . . . . . . . . . . . . . . . . . .D13 25 . . . . . . . . . . . . . . . . . . . . . . . . .F10 026 . . . . . . . . . . . . . . . . . . . . . . . . .G7 026, . . . . . . . . . . . . . . . . . . . . . . . .G7 2 30 . . . . . . . . . . . . . . . . . . . . . . . .F9 RL30 . . . . . . . . . . . . . . . . . . . . . . . .D8 FB31 . . . . . . . . . . . . . . . . . . . . . . .C2 COR32 . . . . . . . . . . . . . . . . . . . . .C12 FB32 . . . . . . . . . . . . . . . . . . . . . . . .C2 FL32 . . . . . . . . . . . . . . . . . . . . . . .C12 RL32 . . . . . . . . . . . . . . . . . . . . . . . .D8 FB33 . . . . . . . . . . . . . . . . . . . . . . . .C2 WS33 . . . . . . . . . . . . . . . . . . . . . .E10 WS33X . . . . . . . . . . . . . . . . . . . . .E10 RL36 . . . . . . . . . . . . . . . . . . . . . . .D10 RL38 . . . . . . . . . . . . . . . . . . . . . . .D10 40 . . . . . . . . . . . . . . . . . . . . . . . . . .D4 FS40 . . . . . . . . . . . . . . . . . . . . . . . .E6 WS40 . . . . . . . . . . . . . . . . . . . . . .E15 FB41 . . . . . . . . . . . . . . . . . . . . . . . .C3 FS41 . . . . . . . . . . . . . . . . . . . . . . . .E6 42 . . . . . . . . . . . . . . . . . . . . . . . . .G15 COR42 . . . . . . . . . . . . . . . . . . . . .C12 FB42 . . . . . . . . . . . . . . . . . . . . . . . .C3 FS42 . . . . . . . . . . . . . . . . . . . . . . . .E6 FS43 . . . . . . . . . . . . . . . . . . . . . . . .E6 FL44 . . . . . . . . . . . . . . . . . . . . . . .C12 045HD . . . . . . . . . . . . . . . . . . . . .A19 WS45 . . . . . . . . . . . . . . . . . . . . . .E15 A Hinges & Pivots B Pulls & Plates C D E Stops F Exterior Hardware Miscellaneous Hardware G BHMA 609 628 666 666 667 668 668 669 670 673 689 702 703 710 711 713 716 Latches, Catches & Bolts Flush Bolts & Coordinators Finishes 690 605 606 689 691 693 695 706 716 P600 618 619 620 622 625 626 612 US US5 US28 US3 US3AL US4 US10A US10AL US14 US15 US92 US65 US26D US10B 313AN 315AN US26D A10B BLK W T BRN CLR US5 A5 AP R US26D US69 US3 US4 SP28 SP10 SPBLK SP313 SP4 P600 BRN GRY TAN White US14 US15 US15A US19 US26 US26D US10 Description Satin Brass Plated, Blackened, Satin Relieved, Clear Coated Satin Aluminum, Clear Coated Bright Brass Plated, Clear Coated Bright Brass Plated, Clear Coated Satin Brass Plated, Clear Coated Satin Bronze Plated, Clear Coated Satin Bronze Plated, Clear Coated Bright Nickel Plated Satin Nickel Plate Aluminum, Clear Coated Aluminum Painted Satin Chrome Plated Oxidized Satin Bronze Plated, Oil Rubbed Dark Bronze Anodized Black Anodizes Satin Bronze Plated, Clear Coated Black Epoxy Coated White Epoxy Coated Tan Epoxy Coated Brown Epoxy Coated Clear Expoxy Coated Satin Brass Plated, Blackened, Satin Relieved, Clear Coated Aluminum Aluminum, Prime Paint Red Epoxy Coated Satin Chrome Plated Dark Bronze Painted Bright Brass, Clear Coated Satin Brass, Clear Coated Aluminum Painted Light Bronze Painted Black Painted Dark Bronze Painted Brass Satin Bronze Plated, Clear Coated Primed for Paint Brown Gray Tan White Rubber Bright Nickel Plated, Clear Coated Satin Nickel Plated, Clear Coated Satin Nickel Plated, Blackened, Satin Relieved, Clear Coated Flat Black Coated Polished Chrome Plated Satin Chrome Plated Satin Bronze, Clear Coated Base Material Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Any Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass, Bronze Brass, Bronze Brass, Bronze Brass, Bronze Brass, Bronze Brass, Bronze Bronze vi USA 1.877.671.7011 Canada 1.905.403.1800 www.ives.ingersollrand.com Finishes D Stops E Exterior Hardware F Miscellaneous Hardware G www.ives.ingersollrand.com Latches, Catches & Bolts Canada 1.905.403.1800 C vii USA 1.877.671.7011 Flush Bolts & Coordinators Antimicrobial Coating (AM) inhibits the growth of bacteria, available on many Ives Architectural Hardware Products. B Steel 406 Base Material Bronze Plastic Plastic Plastic Plastic Plastic Rubber Rubber Rubber Rubber Rubber Stainless Steel 300 Stainless Steel 300 Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Zinc/Brass Pulls & Plates F10B A5 Description Dark Oxidized Satin Bronze, Clear Coated White Black Plastic Brown Plastic Clear Plastic Plastic Rubber Rubber Brown Rubber Tan Rubber Gray Rubber Polished Stainless Steel Satin Stainless Steel Primed for Paint - Steel Primed for Paint - Steel Zinc Plated Zinc Plated Zinc Plated/Dichromate Sealed Bright Brass Plated, Clear Coated Satin Brass Plated, Blackened, Satin Relieved, Clear Coated Satin Bronze Plated, Clear Coated Dark Oxidized Satin Bronze, Clear Coated Bright Nickel Plated, Clear Coated Satin Nickel Plated, Clear Coated Satin Chrome Plated Aluminum Painted Black Painted Dark Bronze Painted Dark Bronze Painted Brass Satin Bronze Plated, Clear Coated A 629 630 600 600 603 603 604 632 638 639 640 645 646 652 689 693 695 695 706 716 716 US US10B White BLK BRN CLR P A3 R Brown Tan Gray US32 US32D USP FP 2G 2C 2G US3 US5 US10 US10B US24 US15 US26D SP28 SPBLK SP313 SP313 SP4 Hinges & Pivots BHMA 613 Pulls & Plates A B C Flush Bolts & Coordinators Latches, Catches & Bolts D Hinges & Pivots Packaging, Handing Packaging Key Many Ives items are available in a variety of packaging forms designated by a prefix. The Ives Price Book contains the specific packaging options for each Ives product. Below is a description of these options. Symbol Description of Package C Carded CGC Commercial Grade Carded SC Schlage Branded Carded SP Slim-Pak SPS Schlage Branded Slim-Pak Door Handing LH Left Hand E Stops F Exterior Hardware G RH Right Hand OUTSIDE INSIDE LRB Left Hand Reverse Bevel Miscellaneous Hardware INSIDE OUTSIDE RRB Right Hand Reverse Bevel viii USA 1.877.671.7011 Canada 1.905.403.1800 www.ives.ingersollrand.com Architectural Hinges, Continuous Hinges and Pivots C Latches, Catches & Bolts D Stops E Exterior Hardware F Miscellaneous Hardware G Pivots Flush Bolts & Coordinators Continuous Hinges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A13 B Residential Hinges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A12 Pulls & Plates 3PB1 3 Knuckle, Full Mortise . . . . . . . . . . . . . . . . . . . . . . . . . . . .A5 3CB1 3 Knuckle, Full Mortise . . . . . . . . . . . . . . . . . . . . . . . . . . . .A5 3CB1HW 3 Knuckle, Full Mortise . . . . . . . . . . . . . . . . . . . . . . . . . . . . A6 3SP1 3 Knuckle, Full Mortise . . . . . . . . . . . . . . . . . . . . . . . . . . . .A6 5PB1 5 Knuckle, Full Mortise . . . . . . . . . . . . . . . . . . . . . . . . . . . .A7 5BB1 5 Knuckle, Full Mortise . . . . . . . . . . . . . . . . . . . . . . . . . . . .A7 5BB1HW 5 Knuckle, Full Mortise . . . . . . . . . . . . . . . . . . . . . . . . . . . .A8 5BB1WT 5 Knuckle, Full Mortise . . . . . . . . . . . . . . . . . . . . . . . . . . . .A8 5BB4 5 Knuckle, Full Mortise . . . . . . . . . . . . . . . . . . . . . . . . . . . .A9 5BB4HW 5 Knuckle, Full Mortise . . . . . . . . . . . . . . . . . . . . . . . . . . . .A9 5BB1SC 5 Knuckle, Full Mortise . . . . . . . . . . . . . . . . . . . . . . . . . . .A10 5BB1SCHW 5 Knuckle, Full Mortise . . . . . . . . . . . . . . . . . . . . . . . . . . .A10 Electrified Hinge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A11 A1 Architectural Hinges page General Hinge Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A2 How to Order . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A3 ANSI Hinge Identification Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A4 Hinges & Pivots Table Of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A31 A1 USA 1.877.671.7011 Canada 1.905.403.1800 www.ives.ingersollrand.com A2 B Pulls & Plates D C Stops E F Exterior Hardware Miscellaneous Hardware G Latches, Catches & Bolts Flush Bolts & Coordinators Hinges & Pivots Architectural Hinges, Continuous Hinges and Pivots General Hinge Information SELECTION OF THE PROPER WEIGHT AND BEARING TYPE Standard Weight . . . . . Plain Bearing Standard Weight . . . . . Ball Bearing, Concealed Bearing Heavy Weight . . . . . . . Ball Bearing, Concealed Bearing CONSIDERATIONS TO DETERMINE WEIGHT AND BEARING TYPE: - Weight of Door - Frequency of use - Frame - Door Hardware Always use ball bearing or concealed bearing hinges for doors with door closers and in all fire rated openings. Heavy weight doors and high frequency doors should use heavy weight ball bearing or concealed bearing hinges. GUIDELINES FOR HINGE METAL - Interior door or non-corrosive area use: Plated or painted Steel - Interior labeled door use: Plated or Painted Steel, Stainless Steel - Interior door in corrosive area use: Stainless Steel , Brass, Bronze - Exterior doors use: Stainless Steel, Brass, Bronze Standard pin material are Brass Hinge – Steel Pin, Stainless Steel Hinge – Stainless Steel Pin, Steel Hinge – Steel Pin GUIDELINES FOR FREQUENCY OF DOOR USAGE: Build Type Daily Usage High Frequency/ Heavy Weight Door Large Department Store Entrance 5,000 Hospital Corridor and Surgical Doors 5,000 Large Office Building Entrance 4,000 School Entrance 1,250 School Toilet Door 1,250 Office Stairwell 500 Office Building Toilet Door 400 Medium Frequency/ Medium Weight Door School Corridor Door 100 Hospital Consultation Rooms 100 Office Building Corridor Door 80 Store Toilet Door 60 Storage Room 50 Low Frequency /Light Door Residential Entrance 30 Interior Residential 20 Hinge Type Heavy Weight Heavy Weight Heavy Weight Heavy Weight Heavy Weight Heavy Weight Heavy Weight Standard Weight Standard Weight Standard Weight Standard Weight Standard Weight Plain Bearing Plain Bearing CONSIDERATIONS TO DETERMINE HINGE SIZE - Door Width - Door Thickness - Weight - Clearance GUIDELINES FOR HINGE HEIGHT DOOR THICKNESS IN INCHES 1-3/8” 1-3/8 1-3/4 1-3/4 1-3/4 2” - 2-1/2” 2” - 2-1/2” DOOR WIDTH IN INCHES Up to 32” 32” to 37” Up to 36” 36” to 48” Over 48” Up to 42” Over 42” CLEARANCE REQUIREMENT* DOOR THICKNESS CLEARANCE NEEDED HINGE OPEN WIDTH 1-3/8 3/4 4 1-3/4 1 4 1-3/4 1-1/2 4-1/2 1-3/4 2 5 1-3/4 3 6 2 1 4-1/2 2 1-1/2 5 2 2-1/2 6 2-1/4 1 5 2-1/4 2 6 2-1/2 3/4 5 2-1/2 1-3/4 6 3 3/4 8 3 2-3/4 8 *Distance needed between wall and door at 180º to allow for any projections from wall; trim, decorative molding, etc. GUIDELINES FOR NUMBER OF HINGES - Doors under 7'6" . . . . . . 3 hinges - Doors over 7'6" . . . . . . . 4 hinges LOCATION OF HINGES Top hinge 5" from jamb rabbet to top of barrel ANSI/BHMA GRADE/MINIMUM CYCLE REQUIREMENTS Grade 1: Grade 2: Grade 3: 2,500,000 Heavy Weight Ball & Concealed Bearing 1,500,000 Standard Weight Ball & Concealed Bearing 350,000 Light Weight Plain Bearing HINGE HEIGHT IN INCHES 3-1/2 4” 4-1/2” 5” 6” 5” heavy weight 6” heavy weight 5" (127mm) Equal Bottom hinge 10" from bottom edge of barrel to finished floor Third hinge centered between top and bottom hinges 10" (254mm) Note: Some western states use a standard 7" from top and 11" from the bottom A2 USA 1.877.671.7011 Canada 1.905.403.1800 www.ives.ingersollrand.com Architectural Hinges, Continuous Hinges and Pivots G Special Pins Applications: NRP Non-Removable Pin TW4 Four Wire TW8 Eight Wire MON Monitor TW4M Four Wire with Monitor TW8M Eight Wire with Monitor Miscellaneous Hardware Finish (Some models require extended lead times): 600 USP - Steel 605 US3 - Brass 606 US4 - Brass 612 US10 - Brass 613 US10B - Brass 619 US15 - Brass 625 US26 - Brass 626 US26D - Brass 630 US32D - Stainless 632 US3 - Steel 633 US4 - Steel 639 US10 - Steel 640 US10B - Steel 641 US10A - Steel 643 US11 - Steel 646 US15 - Steel 651 US26 - Steel 652 US26D - Steel F Larger sizes, up to 6 x 8 are available. Consult factory. Exterior Hardware 5x6 5x7 E Size Examples: 4.5 x 5 3.5 x 3.5 4.5 x 6 4x4 5 x 4.5 4.5 x 4 5x5 4.5 x 4.5 Stops Weight/Options: Blank Standard Weight HW Heavy Weight SC Swing Clear SH Security Stud WT Wide Throw HT Hospital Tip RC Round Corners, 1/4" or 5/8" Radius D Full Mortise Half Mortise Full Surface Half Surface Latches, Catches & Bolts Type: 1 2 3 4 C Plain Bearing Ball Bearing Concealed Bearing Spring Hinge Flush Bolts & Coordinators Function: PB BB CB SP B Number of Knuckles: 3 - 3 Knuckle 5 - 5 Knuckle Pulls & Plates 5 BB 1 HW 4.5x4.5 - ____652 NRP ____ - ________ - ________ ____ A3 How to Order: Hinges & Pivots Ives Hinge Number System Please note: For availability of specific models, please refer to the item’s catalog page or consult Customer Service. A3 USA 1.877.671.7011 Canada 1.905.403.1800 www.ives.ingersollrand.com A4 Hinges & Pivots Architectural Hinges ANSI Hinge Identification Reference D Third number indicates function 1 – Anti-friction bearing 2 – Anti-friction bearing, swing clear 3 – Plain bearing 4 – 4 to 0, special conditions E B Pulls & Plates C Flush Bolts & Coordinators Second number indicates product type 1 – Full mortise 2 – Half mortise 3 – Full surface 4 – Half surface 5 – Anchor, pivot reinforced or thrust pivot unit or hinge sets 6 – Olive knuckle hinges 7 – Pivot hinge 8 – Rescue hardware Stops First number indicates material 1 – Cast, forged or extruded brass or bronze 2 – Wrought brass or bronze 5 – Stainless steel 8 – Wrought or forged steel, or malleable iron Latches, Catches & Bolts A = ANSI Fourth number indicates grade 1 – Grade 1, 4BB Extra Heavy Duty 2 – Grade 2, 2BB Standard Duty 3 – Grade 3, Plain Bearing F Exterior Hardware G Miscellaneous Hardware Example: A8111 – Steel, Full Mortise, Anti-friction, Grade 1 A5112 – Stainless, Full Mortise, Anti Friction Bearing, Grade 2 A4 USA 1.877.671.7011 Canada 1.905.403.1800 www.ives.ingersollrand.com Architectural Hinges US10B US10A US11 US15 US26 US26D BHMA 605 606 612 613 614 616 619 625 626 Finishes steel Ives Finish USP US3 US4 US10 US11 US15 US26 US26D BHMA 632 633 639 643 646 651 652 600 US10B US10A 640 641 Finishes stainless steel Ives Finish US32 US32D BHMA USA 1.877.671.7011 629 G US10 Miscellaneous Hardware US4 F Finishes brass Ives Finish US3 Exterior Hardware Meets ANSI/BHMA A156.1 A8112 – Steel A5112 – Stainless Steel A2112 – Brass E Options • NRP, Non-Removable Pin • SH, Security stud • HT, Hospital Tip • RC, Round Corners - 1/4" or 5/8" Radius • SEC, Security Fastners - Pin-in-Socket Dimensions Size (Inches) Size (mm) Gauge 3.5 x 3.5 90 x 90 0.134 4x4 102 x 102 0.134 4.5 x 4 114 x 102 0.134 4.5 x 4.5 114 x 114 0.134 5 x 4.5 127 x 114 0.134 Stops • For standard weight doors • Medium frequency usage • Packed with wood and metal screws D 3 Knuckle, Concealed Bearing Full Mortise Hinge Latches, Catches & Bolts Gauge 0.134 0.134 0.134 0.134 0.134 C 3CB1 Size (mm) 90 x 90 102 x 102 114 x 102 114 x 114 127 x 114 Flush Bolts & Coordinators Dimensions Size (Inches) 3.5 x 3.5 4x4 4.5 x 4 4.5 x 4.5 5 x 4.5 B Meets ANSI/BHMA A156.1 A8133 – Steel A5133 – Stainless Steel A2133 – Brass Pulls & Plates Options • NRP, Non-Removable Pin • SH, Security Stud • HT, Hospital Tip • RC, Round Corners - 1/4" or 5/8" Radius • SEC, Security Fasteners - Pin-in-Socket A5 3 Knuckle, Plain Bearing Full Mortise Hinge • For standard weight doors • Low frequency usage • Packed with wood and metal screws Not for use with a door closer. Hinges & Pivots 3PB1 630 Canada 1.905.403.1800 www.ives.ingersollrand.com A5 A6 B • For heavy weight doors • High frequency usage • Packed with wood and metal screws Options • NRP, Non-Removable Pin • SH, Security stud • HT, Hospital Tip • RC, Round Corners - 1/4" or 5/8" Radius • SEC, Security Fastners - Pin-in-Socket Pulls & Plates Flush Bolts & Coordinators C 3CB1HW 3 Knuckle, Concealed Bearing Full Mortise Hinge Dimensions Size (Inches) 4.5 x 4 4.5 x 4.5 5 x 4.5 5x5 Meets ANSI/BHMA A156.1 A8112 – Steel A5112 – Stainless Steel A2112 – Brass E Stops F Exterior Hardware G Gauge 0.180 0.180 0.190 0.190 3 Knuckle Spring Full Mortise Hinge • For automatic closing of doors • Packed with wood and metal screws Options • HT, Hospital Tip • RC, Round Corners - 1/4" or 5/8" Radius • SEC, Security Fastners - Pin-in-Socket Dimensions Size (Inches) 4x4 4.5 x 4 4.5 x 4.5 Meets ANSI/BHMA A156.7 K81071F – Steel K51071F – Stainless Steel Miscellaneous Hardware Size (mm) 114 x 102 114 x 114 127 x 114 127 x 127 3SP1 Latches, Catches & Bolts D Hinges & Pivots Architectural Hinges UL listed for use with fire rated doors Size (mm) 102 x 102 114 x 102 114 x 114 Gauge 0.134 0.134 0.134 Finishes brass Ives Finish US3 US4 US10 US10B US10A US11 US15 US26 US26D BHMA 605 606 612 613 614 616 619 625 626 Finishes steel Ives Finish USP US3 US4 US10 US11 US15 US26 US26D BHMA 632 633 639 643 646 651 652 600 US10B US10A 640 641 Finishes stainless steel Ives Finish US32 US32D BHMA 629 630 A6 USA 1.877.671.7011 Canada 1.905.403.1800 www.ives.ingersollrand.com Architectural Hinges Gauge 0.130 0.130 0.134 0.134 Size (Inches) 5 x 4.5 5x5 Size (mm) 127 x 114 127 x 127 Finishes brass Ives Finish US3 US4 US10 US10B US10A US11 US15 US26 US26D BHMA 605 606 612 613 614 616 619 625 626 Finishes steel Ives Finish USP US3 US4 US10 US11 US15 US26 US26D BHMA 632 633 639 643 646 651 652 600 US10B US10A 640 641 Finishes stainless steel Ives Finish US32 US32D BHMA USA 1.877.671.7011 629 G Size (mm) 80 x 102 102 x 102 114 x 102 114 x 114 Miscellaneous Hardware Dimensions Size (Inches) 3.5 x 3.5 4x4 4.5 x 4 4.5 x 4.5 F Meets ANSI/BHMA A156.1 A8112 – Steel A5112 – Stainless Steel A2112 – Brass Exterior Hardware Options • NRP, Non-Removable Pin • SH, Security Stud • HT, Hospital Tip • RC, Round Corners - 1/4" or 5/8" Radius • SEC, Security Fastners - Pin-in-Socket E For standard weight doors Medium frequency usage 2 ball bearing Packed with wood and metal screws Stops 5 Knuckle, Ball Bearing Full Mortise Hinge • • • • D Gauge 0.123 0.134 0.134 0.134 0.134 Latches, Catches & Bolts 5BB1 Size (mm) 89 x 89 102 x 102 114 x 102 114 x 114 127 x 114 C Dimensions Size (Inches) 3.5 x 3.5 4x4 4.5 x 4 4.5 x 4.5 5 x 4.5 Flush Bolts & Coordinators Meets ANSI/BHMA A156.1 A8133 – Steel A5133 – Stainless Steel A2133 – Brass B Options • NRP, Non-Removable Pin • SH, Security Stud • HT, Hospital Tip • RC, Round Corners - 1/4" or 5/8" Radius • SEC, Security Fastners - Pin-in-Socket Pulls & Plates • For standard weight doors • Low frequency usage • Packed with wood and metal screws Not for use with a door closer. A7 5 Knuckle, Plain Bearing Full Mortise Hinge Hinges & Pivots 5PB1 Gauge 0.146 0.146 630 Canada 1.905.403.1800 www.ives.ingersollrand.com A7 B Hinges & Pivots E Stops F Exterior Hardware G For heavy weight doors High frequency usage 4 ball bearing Packed with wood and metal screws Options • NRP, Non-Removable Pin • SH, Security Stud • HT, Hospital Tip • RC, Round Corners - 1/4" or 5/8" Radius • SEC, Security Fastners - Pin-in-Socket Meets ANSI/BHMA A156.1 A8111 – Steel A5111 – Stainless Steel A2111 – Brass Dimensions Size (Inches) Size (mm) 4.5 x 4 114 x 102 4.5 x 4.5 114 x 114 5BB1WT Gauge 0.180 0.180 Size (Inches) Size (mm) 5 x 4.5 127 x 114 5x5 127 x 127 For medium weight doors Medium frequency usage 2 ball bearing Packed with wood and metal screws Options • NRP, Non-Removable Pin • SH, Security Stud • HT, Hospital Tip • RC, Round Corners - 1/4" or 5/8" Radius • SEC, Security Fastners - Pin-in-Socket Dimensions Size (Inches) 4.5 x 5 4.5 x 6 5x6 5x7 5x8 Size (mm) 114 x 127 114 x 152 127 x 152 127 x 178 127 x 203 Gauge 0.134 0.134 0.146 0.146 0.146 Finishes brass Ives Finish US3 US4 US10 US10B US10A US11 US15 US26 US26D BHMA 605 606 612 613 614 616 619 625 626 Finishes steel Ives Finish USP US3 US4 US10 US11 US15 US26 US26D BHMA 632 633 639 643 646 651 652 600 Gauge 0.190 0.190 5 Knuckle, Ball Bearing, Wide Throw Full Mortise Hinge • • • • Meets ANSI/BHMA A156.1 A8111 – Steel Miscellaneous Hardware 5 Knuckle, Ball Bearing, Heavy Weight Full Mortise Hinge • • • • Pulls & Plates Flush Bolts & Coordinators C D 5BB1HW Latches, Catches & Bolts A8 Architectural Hinges US10B US10A 640 641 Finishes stainless steel Ives Finish US32 US32D BHMA 629 630 A8 USA 1.877.671.7011 Canada 1.905.403.1800 www.ives.ingersollrand.com Architectural Hinges Dimensions Size (Inches) 4.5 Size (mm) 114 Gauge 0.180 Finishes brass Ives Finish US3 US4 US10 US10B US10A US11 US15 US26 US26D BHMA 605 606 612 613 614 616 619 625 626 Finishes steel Ives Finish USP US3 US4 US10 US11 US15 US26 US26D BHMA 632 633 639 643 646 651 652 600 US10B US10A 640 641 Finishes stainless steel Ives Finish US32 US32D BHMA USA 1.877.671.7011 629 G Meets ANSI/BHMA A156.1 A8411 – Steel Miscellaneous Hardware Options • NRP, Non-Removable Pin • HT, Hospital Tip • RC, Round Corners - 1/4" or 5/8" Radius • SEC, Security Fastners - Pin-in-Socket F For heavy weight doors High frequency usage 4 ball bearing Packed with through bolts, grommets and sheet metal screws Exterior Hardware • • • • E 5BB4HW 5 Knuckle, Ball Bearing, Half Surface Heavy Weight Hinge Stops Gauge 0.134 D Size (mm) 114 Latches, Catches & Bolts Dimensions Size (Inches) 4.5 C Meets ANSI/BHMA A156.1 A8412 – Steel Flush Bolts & Coordinators Options • NRP, Non-Removable Pin • HT, Hospital Tip • RC, Round Corners - 1/4" or 5/8" Radius • SEC, Security Fastners - Pin-in-Socket B For standard weight doors Medium frequency usage 2 ball bearing Packed with through bolts, grommets and sheet metal screws Pulls & Plates • • • • A9 5 Knuckle, Ball Bearing, Half Surface Hinge Hinges & Pivots 5BB4 630 Canada 1.905.403.1800 www.ives.ingersollrand.com A9 5BB1SC Hinges & Pivots A10 Architectural Hinges 5 Knuckle, Ball Bearing, Swing Clear Full Mortise Hinge • • • • • For standard weight doors Square edge standard Medium frequency usage 2 ball bearing Packed with flat head wood and metal screws B Pulls & Plates C D Options • NRP, Non-Removable Pin • B, beveled edge door • HT, Hospital Tip • RC, Round Corners - 1/4" or 5/8" Radius • SEC, Security Fastners - Pin-in-Socket Meets ANSI/BHMA A156.1 A8122 – Steel A5122 – Stainless Steel A2122 – Brass Dimensions Size (Inches) Size (mm) 4.5 114 5 127 5BB1SCHW Latches, Catches & Bolts Flush Bolts & Coordinators Designed to completely clear the opening when door is opened 92 degrees. E For heavy weight doors Beveled edge standard High frequency usage 2 ball bearing Packed with flat head wood and metal screws Designed to completely clear the opening when door is opened 92 degrees. Options • NRP, Non-Removable Pin • B, beveled edge door • HT, Hospital Tip • RC, Round Corners - 1/4" or 5/8" Radius • SEC, Security Fastners - Pin-in-Socket Stops Exterior Hardware F G 5 Knuckle, Ball Bearing, Swing Clear Heavy Weight Full Mortise Hinge • • • • • Meets ANSI/BHMA A156.1 A8121 – Steel Miscellaneous Hardware Gauge 0.134 0.134 Dimensions Size (Inches) 4.5 5 Size (mm) 114 127 Gauge 0.180 0.190 Finishes brass Ives Finish US3 US4 US10 US10B US10A US11 US15 US26 US26D BHMA 605 606 612 613 614 616 619 625 626 Finishes steel Ives Finish USP US3 US4 US10 US11 US15 US26 US26D BHMA 632 633 639 643 646 651 652 600 US10B US10A 640 641 Finishes stainless steel Ives Finish US32 US32D BHMA 629 630 A10 USA 1.877.671.7011 Canada 1.905.403.1800 www.ives.ingersollrand.com Architectural Hinges 605 606 612 613 614 616 619 625 626 Finishes steel Ives Finish USP US3 US4 US10 US11 US15 US26 US26D BHMA 632 633 639 643 646 651 652 600 US10B US10A 640 641 Finishes stainless steel Ives Finish US32 US32D BHMA USA 1.877.671.7011 629 630 Canada 1.905.403.1800 www.ives.ingersollrand.com G BHMA Miscellaneous Hardware US26D F US26 Exterior Hardware US15 E US11 Stops US10A D US10B Latches, Catches & Bolts US10 C US4 Flush Bolts & Coordinators Finishes brass Ives Finish US3 B Through-Wire is rated for 50 volts AC/DC at 3.5 amp continuous and 16 amp pulse, maximum pulse 400 mili second. Monitor rated 30VDC at .5 amp Pulls & Plates UL Listed - UL634 Meets ANSI/BHMA A156.1 A8111 – Steel A5111 – Stainless Steel A2111 – Brass A11 Available Options - Through Wire - TW4 (4 wires) & TW8 (8 wires) - Monitor – MON - Through Wire with Monitor – TW4M & TW8M • Available in 3 and 5 Knuckle • One hinge per box, packed with wood and machine screws • Hinge is NRP as a standard • High quality brass ferrules and plastic tubing protect the wires • Through-wire hinges cycle tested to ensure durability • Ives warranty applies - 12 months from date of shipment Hinges & Pivots Electrified Hinge A11 A12 B Pulls & Plates Hinges & Pivots Architectural Hinges 1000 Series Residential Hinges • Full mortise hinges in 2 sizes: 3-1/2" and 4". • Two corner options: Square corners and 5/8" or 1/4" radius corners. • Substrates include: Steel. 1010 1011 C Flush Bolts & Coordinators Schlage Carded Only 1012 D Latches, Catches & Bolts Schlage Carded Only Model Size Corner 1010 1011 1012 1020 1021 3-1/2" x 3-1/2" 3-1/2" x 3-1/2" 3-1/2" x 3-1/2" 4" x 4" 4" x 4" Square Corner 5/8" Radius Corner 1/4" Radius Corner Square Corner 5/8" Radius Corner 1020 Finishes steel Ives Finish F605E Schlage Carded Only BHMA F609E 632 F619E F620E* F625E** F716E 646 651 * not available on 1012 hinge * only available on 1011 1021 E Stops F Exterior Hardware G Miscellaneous Hardware Schlage Carded Only A12 USA 1.877.671.7011 Canada 1.905.403.1800 www.ives.ingersollrand.com Continuous Hinges E Exterior Hardware F Miscellaneous Hardware G www.ives.ingersollrand.com Stops Canada 1.905.403.1800 D USA 1.877.671.7011 Latches, Catches & Bolts Pin and Barrel Hinges General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A24 Electrified Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A24 How to Order . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A25 Door Sizing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A26 600, 700 . . . . . . . . . . . . . .Full Mortise . . . . . . . . . . . . . . . . . . . . . . . . .A27 602, 702 . . . . . . . . . . . . . .Full Surface . . . . . . . . . . . . . . . . . . . . . . . . .A27 611, 711 . . . . . . . . . . . . . .Swing Clear . . . . . . . . . . . . . . . . . . . . . . . . . .A28 705 . . . . . . . . . . . . . . . . . .Full Mortise, Full Wrap . . . . . . . . . . . . . . . . .A28 715 . . . . . . . . . . . . . . . . . .Full Mortise, Full Wrap . . . . . . . . . . . . . . . . .A29 Electrical Cutouts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A30 C Aluminum Geared Hinges General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A16 Electrified Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A16 How to Order . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A17 Door Sizing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A18 045HD . . . . . . . . . . . . . . .Half Surface . . . . . . . . . . . . . . . . . . . . . . . . .A19 046HD . . . . . . . . . . . . . . .Half Surface . . . . . . . . . . . . . . . . . . . . . . . . .A19 053HD . . . . . . . . . . . . . . .Half Surface . . . . . . . . . . . . . . . . . . . . . . . . .A20 054HD . . . . . . . . . . . . . . .Half Surface . . . . . . . . . . . . . . . . . . . . . . . . .A20 112HD . . . . . . . . . . . . . . .Full Mortise . . . . . . . . . . . . . . . . . . . . . . . . .A21 157HD . . . . . . . . . . . . . . .Full Surface, Center Pivot . . . . . . . . . . . . . . .A21 210HD . . . . . . . . . . . . . . .Full Surface, Swing Clear . . . . . . . . . . . . . . .A22 224HD . . . . . . . . . . . . . . .Full Mortise, Edge Protector . . . . . . . . . . . . .A22 Electrical Cutouts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A23 Flush Bolts & Coordinators page Continuous Hinge Types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A14 Cross Reference Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A15 B Continuous Hinge Table Of Contents Pulls & Plates Continuous hinges are available in two styles; aluminum geared and pin and barrel in steel or stainless steel. A13 The design of a continuous hinge eliminates the gap between the door and the frame. The absence of gap also helps prevents finger from being pinched, making it a safer device than traditional hinges. These benefits result in higher efficiency and less maintenance, maximizing the value of your opening investment. Hinges & Pivots Ives Continuous Hinges are designed to last the life of the building. The unique design distributes the weight of the door along the entire length of the frame, reducing the high amount of stress normally associated at top of door and frame on butt hinge applications. Not only does this reduce hinge failure, it also keeps your door in constant alignment, eliminating the chance of door sag. These characteristics make continuous hinges suitable for high use/high traffic doors. A13 A14 B C Flush Bolts & Coordinators D E Stops F Exterior Hardware G Miscellaneous Hardware Latches, Catches & Bolts Pulls & Plates Hinges & Pivots Continuous Hinges Aluminum Geared Geared continuous hinges utilize a single gear section for the leaf and a separate gear section for the frame side of the door. The two are held in place together by a full length cover channel and rotate on a series of bearings. Pin and Barrel Pin and Barrel hinges share many of the same characteristics of a traditional hinge. Both have a center pin and rolled knuckles. However, a continuous Pin and Barrel hinge stretches along the entire length of the frame. IVES offers both stainless steel and primed steel to best match your specific application. 0.060" [ Lifetime Warranty Ives continuous hinges carry a limited lifetime warranty, ensuring your opening will function to your satisfaction every time. A14 USA 1.877.671.7011 Canada 1.905.403.1800 www.ives.ingersollrand.com Continuous Hinges 780-053HD 054HD 780-054HD 112HD 780-112HD MCK-12HD FMSLFHD SL11HD 661HD 210HD 780-210HD MCK-22HD FSHD SL21HD 665HD 224HD 780-224HD MCK-25HD FMHD SL24HD 662HD 157HD 780-157HD MCK-58HD FSCPHD SL57HD 664HD Pin and Barrel 600 FM200 602 FS202 611 N/A 700 790-900 702 SL200 FM300 SL300 FS302 SL302 651 705 790-905 HG305 SL305 652 711 790-911 HG311 SL311 656 715 790-915 HG315 USA 1.877.671.7011 Canada 1.905.403.1800 www.ives.ingersollrand.com G 053HD Miscellaneous Hardware 780-046HD F 046HD Exterior Hardware 780-045HD E 045HD Stops Geared D Stanley Latches, Catches & Bolts Select C Pemko Flush Bolts & Coordinators McKinney B Markar Pulls & Plates Hager A15 Ives Hinges & Pivots Cross Reference Guide 653 A15 A16 Hinges & Pivots Continuous Hinges Aluminum Geared Hinges General Information Flush Bolts & Coordinators B C D Latches, Catches & Bolts Stops E Pulls & Plates Material 6063-T6 Aluminum Standard Lengths 83", 85", 95", 120" Custom lengths are available up to 120", consult factory. Finishes CL - US28 (628) Clear Anodized BR - 313AN (710) Dark Bronze Hinge Duty All Ives Aluminum Geared Hinges are Heavy Duty (HD). Amount of bearings varies by size: 83" – 32 Bearings 85" – 32 Bearings 95" – 36 Bearings 120"- 47 Bearings Door Weight Each hinge can hold a door up to 450 lbs (Rivet nuts recommended) and a max door width of 4'0". ANSI Certified All Ives Aluminum Geared Hinges are certified to ANSI 156.26, Grade 1 UL Listed All Ives Aluminum Geared Hinges are tested and approved UL 10C (90 minutes). Field Modifications: All Ives Aluminum Geared Continuous Hinges can be cut to length during installation. The unique mounting pattern allows to cut up to 6" from bottom while still having double row fasteners. If cut more than 13.5", other modifications may be necessary. Electrification Options F G Miscellaneous Hardware Exterior Hardware Only available for the full mortise hinges Electric Power Transfer (EPT) Electric power transfer provides a means of transferring power from the door frame to the edge of a swinging door. Ives Continuous Hinges provide standard cut outs to fit Von Duprin EPT-2, EPT-10 and PNT-1 devices. Consult factory for other electrical cut out options. Electrical Through-Wire (TW) Provides electric power transfer from the frame to the door in order to supply power to an electrified mortise or cylindrical locks, exit devices with electric latch retraction, and/or electric strikes (pairs of doors). Through-wire is rated 50 volts AC/DC at 3.5 amp continuous and 16 amp pulse. Maximum pulse 400 milliseconds. Ives thru-wire hinges are fully compatible with 4 wire and 8 wire installations. A16 USA 1.877.671.7011 Canada 1.905.403.1800 www.ives.ingersollrand.com Continuous Hinges Exterior Hardware F Miscellaneous Hardware G Electric Power Transfer Prep Electric Through Wire Security Fasteners - Pin-in-Socket Wood Fasteners Thread forming screws (pilot hole required) E Options * EPT * TW8 SEC WD HM Stops Length 83" 85" 95" 120" Other lengths available up to 120", consult factory. Handing required. D Clear Bronze - Latches, Catches & Bolts Finish CL BR 83 __ C Half Surface Half Surface Half Surface Half Surface Full Mortise Full Surface - Center Pivot Full Surface - Swing Clear Full Mortise - Edge Protector - Flush Bolts & Coordinators Model 045HD 046HD 053HD 054HD 112HD 157HD 210HD 224HD CL ____ B - Pulls & Plates 112HD ____ A17 How to Order: Hinges & Pivots Aluminum Geared Hinges EPT ____ * Full Mortise Models Only USA 1.877.671.7011 Canada 1.905.403.1800 www.ives.ingersollrand.com A17 A18 B Pulls & Plates C D Latches, Catches & Bolts E Stops Flush Bolts & Coordinators Hinges & Pivots Continuous Hinges Aluminum Geared Hinges - Clearance Requirements Hinge Side Clearance Hinge Side Clearance 1/8” 3/16” Hinge Side Clearance 1/16” Frame Irregularity 1/32” Frame Irregularity SINGLE DOOR Model Hinge-Side Clearance 045HD 046HD 053HD 054HD 112HD 224HD 210HD 157HD 5/32" 5/32" 5/32" 5/32" 5/16" 5/16" 1/16" 1/16" Lock-Side Frame Beveled Door Clearance Irregularity Clearance 1/8" 1/8" 1/8" 1/8" 1/8" 1/8" 1/8" 1/8" 1/32" 1/32" 1/32" 1/32" 1/32" 1/32" 1/32" 1/32" 1/32" 1/32" 1/32" 1/32" 1/32" 1/32" 1/32" 1/32" Door Under-Sizing Square Beveled Edged Edged 5/16" 5/16" 5/16" 5/16" 15/32" 15/32" 7/32" 7/32" 11/32" 11/32" 11/32" 11/32" 1/2" 1/2" 1/4" 1/4" F Exterior Hardware G Miscellaneous Hardware PAIR OF DOORS Model Hinge-Side Clearance 045HD 046HD 053HD 054HD 112HD 224HD 210HD 157HD 5/32" 5/32" 5/32" 5/32" 5/16" 5/16" 1/16" 1/16" Square Lock-Side Frame Beveled Door Edged Clearance Irregularity Clearance Total 3/16" 3/16" 3/16" 3/16" 3/16" 3/16" 3/16" 3/16" 1/16" 1/16" 1/16" 1/16" 1/16" 1/16" 1/16" 1/16" 1/16" 1/16" 1/16" 1/16" 1/16" 1/16" 1/16" 1/16" Door Under-Sizing Square Beveled Beveled Edged Edged Edged Each Door Total Each Door 9/16" 9/16" 9/16" 9/16" 7/8" 7/8" 3/8" 3/8" 9/32" 9/32" 9/32" 9/32" 7/16" 7/16" 3/16" 3/16" 5/8" 5/8" 5/8" 5/8" 15/16" 15/16" 7/16" 7/16" 5/16" 5/16" 5/16" 5/16" 15/32" 15/32" 7/32" 7/32" Templates and installation instructions available on line at ives.ingersollrand.com A18 USA 1.877.671.7011 Canada 1.905.403.1800 www.ives.ingersollrand.com Continuous Hinges Miscellaneous Hardware G Half surface for retrofit or new construction Non-handed Frame leaf depth 1-15/16" 9/32" door inset Standard lengths 83", 85", 95", 120" Standard Mounting Hardware 12-24 x 1/2" steel self tapping screw 1/4-20 x 1-1/2" AL Sex Bolt 1/4-20 x 1" Steel Shoulder Bolt 12-24 x 3/4" Steel Self Drilling Shoulder Bolt Optional SEC-Security Fasteners available Finishes Clear (CL), Dark Bronze (DB) Custom Anodizing and Painting are available, consult factory. 3-1/16" 1-9/32" 2-5/8" 1-15/16" 5/32" Clearance for Square Edge Door 3/16" Clearance For Beveled Edge Door Canada 1.905.403.1800 F Half Surface Continuous Hinge • • • • USA 1.877.671.7011 Exterior Hardware 046HD E 5/32" Clearance for Square Edge Door 3/16" Clearance For Beveled Edge Door Stops 1-9/16" D 2-9/32" Latches, Catches & Bolts 1-9/32" Custom Anodizing and Painting are available, consult factory. C 3-1/16" Finishes Clear (CL), Dark Bronze (DB) Flush Bolts & Coordinators Standard lengths 83", 85", 95", 120" Standard Mounting Hardware 12-24 x 1/2" steel self tapping screw 1/4-20 x 1-1/2" AL Sex Bolt 1/4-20 x 1" Steel Shoulder Bolt 12-24 x 3/4" Steel Self Drilling Shoulder Bolt Optional SEC-Security Fasteners available B Half surface for retrofit or new construction Non-handed Frame leaf depth 1-9/16" 9/32" door inset Pulls & Plates • • • • A19 Half Surface Continuous Hinge Hinges & Pivots 045HD www.ives.ingersollrand.com A19 A20 B Pulls & Plates Flush Bolts & Coordinators C D Latches, Catches & Bolts Stops E F Exterior Hardware Miscellaneous Hardware G Hinges & Pivots Continuous Hinges 053HD Half Surface Continuous Hinge Half surface for retrofit or new construction Non-handed Frame leaf depth 1-9/16" 1/8" door inset • • • • Standard lengths 83", 85", 95", 120" Standard Mounting Hardware 12-24 x 1/2" steel self tapping screw 1/4-20 x 1-1/2" AL Sex Bolt 1/4-20 x 1" Steel Shoulder Bolt 12-24 x 3/4" Steel Self Drilling Shoulder Bolt Optional SEC-Security Fasteners available Finishes Clear (CL), Dark Bronze (DB) Custom Anodizing and Painting are available, consult factory. 2-1/8" 1-5/32" 2-9/32" 1-9/16" 5/32" Clearance for Square Edge Door 3/16" Clearance For Beveled Edge Door 054HD Half Surface Continuous Hinge • • • • Half surface for retrofit or new construction Non-handed Frame leaf depth 1-15/16" 1/8" door inset Standard lengths 83", 85", 95", 120" Standard Mounting Hardware 12-24 x 1/2" steel self tapping screw 1/4-20 x 1-1/2" AL Sex Bolt 1/4-20 x 1" Steel Shoulder Bolt 12-24 x 3/4" Steel Self Drilling Shoulder Bolt Optional SEC-Security Fasteners available 2-1/8" 1-5/32" Finishes Clear (CL), Dark Bronze (DB) 2-5/8" Custom Anodizing and Painting are available, consult factory. 1-15/16" 5/32" Clearance for Square Edge Door 3/16" Clearance For Beveled Edge Door A20 USA 1.877.671.7011 Canada 1.905.403.1800 www.ives.ingersollrand.com Continuous Hinges E Exterior Hardware F Miscellaneous Hardware G Non Handed Narrow Frame 1/16" Door Inset 48" Maximum Door Width Beveled or Square Edge Doors Stops • • • • • D Full Surface, Center Pivot Aluminum Geared Continuous Hinge Latches, Catches & Bolts 157HD C 5/16" Clearance for Square Edge Door 1/32" Clearance For Beveled Edge Door Flush Bolts & Coordinators Custom Anodizing and Painting are available, consult factory. B Finishes Clear (CL), Dark Bronze (DB) Pulls & Plates Standard lengths 83", 85", 95", 120" Standard Mounting Hardware 12-24 X 3/4" Steel Self Drilling, Self Tapping Screws Optional WD - Wood Screws or SEC - Security Fasteners Available A21 Full Moritse Aluminum Geared Continuous Hinge • Non Handed • Flush Mounted, No Inset • 48" Maximum Door Width • Beveled or Square Edge Doors For Doors Weighing up to 450 pounds without reinforcing, 600 pounds with reinforcing Hinges & Pivots 112HD For Doors Weighing up to 600 pounds Standard lengths 83", 85", 95", 120" Standard Mounting Hardware 12-24 X 1/2" Steel Self Tapping Screws, 1/4-20 X 1-1/2" AL Sex Bolt, 1/4-20 X 1" Steel Shoulder Bolt, 12-24 X 3/4” Steel Self Drilling, Optional SEC - Security Fasteners Available Finishes Clear (CL), Dark Bronze (DB) Custom Anodizing and Painting are available, consult factory. 1/16" Clearance for Square Edge Door 3/32" Clearance For Beveled Edge Door USA 1.877.671.7011 Canada 1.905.403.1800 www.ives.ingersollrand.com A21 A22 Hinges & Pivots Continuous Hinges 210HD Full Surface, Swing Clear Aluminum Geared Continuous Hinge • • • • Non Handed 1/32" Door Inset 48" Maximum Door Width Beveled or Square Edge Doors B Pulls & Plates C Flush Bolts & Coordinators D E F Exterior Hardware Miscellaneous Hardware G Stops Latches, Catches & Bolts For Doors Weighing up to 600 pounds Standard lengths 83", 85", 95", 120" Standard Mounting Hardware 12-24 X 1/2" Steel Self Tapping Screws, 1/4-20 X 1-1/2" AL Sex Bolt 1/4-20 X 1" Steel Shoulder Bolt, 12-24 X 3/4" Steel Self Drilling, Optional SEC - Security Fasteners Available Finishes Clear (CL), Dark Bronze (DB) Custom Anodizing and Painting are available, consult factory. 1/16" Clearance for Square Edge Door 3/32" Clearance For Beveled Edge Door 224HD Full Mortise Aluminum Geared Continuous Hinge • • • • • Non Handed Door Edge Protector 48" Maximum Door Width 1/16" Door Inset Beveled or Square Edge Doors For Doors Weighing up to 450 pounds without reinforcing, 600 pounds with reinforcing Standard lengths 83", 85", 95", 120" Standard Mounting Hardware 12-24 X 3/4" Steel Self Drilling, Self Tapping Screws Optional WD - Wood Screws or SEC - Security Fasteners Available Finishes Clear (CL), Dark Bronze (DB) Custom Anodizing and Painting are available, consult factory. 5/16" Clearance for Square Edge Door 1/32" Clearance For Beveled Edge Door A22 USA 1.877.671.7011 Canada 1.905.403.1800 www.ives.ingersollrand.com Continuous Hinges G 112HD/224HD TW 41-1/2" 42-1/2" 57-3/4" 81-25/32" Miscellaneous Hardware 224HD EPT 30" 32" 42" 67" F TW 112HD 224HD 2 112HD EPT 30" 32" 42" 67" Exterior Hardware Standard Length 83" 85" 95" 120" E From Top Edge of Door to Center Line of Cut-Out Stops For your general information below are standard locations for Von Duprin EPT2 or EPT10, and monitor switch. D “C L EPT” Latches, Catches & Bolts “C L EPT” Because clearances may vary between door and frame manufacturer, and locations can be influenced by the door hardware it is always recommend contacting Ives Customer Technical for specific template information. C When ordering indicate the following: 1. Opening size. 2. Handing. LH, RH, RHR or LHR. 3. Manufacturer and model number of the electrical product being used. Example; Von Duprin EPT2 Flush Bolts & Coordinators T of Top hinge/door B Top of hinge/door Ives Aluminum Geared Continuous Hinges are available with factory modified cutouts to accommodate most electrical frame to door requirements. Special T templates are required. Pulls & Plates EPT 224HD A23 EPT 112HD Hinges & Pivots Electrical Cutouts Top of hinge/door “C L TW” USA 1.877.671.7011 Canada 1.905.403.1800 www.ives.ingersollrand.com A23 A24 Hinges & Pivots Continuous Hinges Pin and Barrel Hinges Flush Bolts & Coordinators B C D Latches, Catches & Bolts Stops E Pulls & Plates General Information Standard Lengths 83", 85", 95", 120" Custom lengths are available up to 120", consult factory. Finishes US32D (630) Satin Stainless Steel USP (600) Steel, Primed for Paint Barrel Type Twin Self Lubricated Nylon Bearings with Stainless Steel Pin. Door Weight Each hinge can hold a door up to 600 lbs (Rivet nuts recommended) and a max door width of 4'0". ANSI Certified All Ives Pin and Barrel Hinges certified to ANSI 156.26, Grade 1. UL Listed All Ives Steel and Stainless Steel Pin and Barrel Hinges are tested and approved UL 10C (3 hr). Field Modifications All Ives Pin and Barrel Continuous Hinges can be cut to length during installation. If more than 6" from bottom of hinge, additional modifications may be necessary. Electrification Options F Exterior Hardware G Miscellaneous Hardware Only available for the Full Mortise Hinges Electric Power Transfer (EPT) Electric power transfer provides a means of transferring power from the door frame to the edge of a swinging door. Ives Continuous Hinges provide cut outs to fit Von Duprin EPT-2, EPT-10 and PNT-1 devices. Consult factory for other EPT cut out options. Electrical Through-Wire (TW) Provides electric power transfer from the frame to the door in order to supply power to an electrified mortise or cylindrical locks, exit devices with electric latch retraction, and/or electric strikes (pairs of doors). Through-wire is rated for 3.5 amp continuous and 16 amp pulse. Ives thru-wire are fully compatible with 4 wire and 8 wire installations. A24 USA 1.877.671.7011 Canada 1.905.403.1800 www.ives.ingersollrand.com Continuous Hinges G (600) Primed Length 83" 85" 95" 120" Other lengths available up to 120”, consult factory. Handing is required. Options * EPT * TW8 * TW4M, TW8M SF WD Electric Power Transfer Prep Electric Through Wire Electric Through Wire + Monitoring Security Fasteners - Torx Wood Fasteners * Full Mortise Models Only USA 1.877.671.7011 Miscellaneous Hardware Steel USP F Finish Stainless Steel US32D (630) Exterior Hardware Full Mortise Full Surface - Center Pivot Full Surface - Swing Clear E Steel 600 602 611 Stops Model Stainless Steel 700 Full Mortise 702 Full Surface - Center Pivot 705 Full Mortise - Full Wrap 711 Full Surface - Swing Clear 715 Full Mortise - Half Wrap EPT ____ D - Latches, Catches & Bolts 83 ____ C - Flush Bolts & Coordinators US32D ____ B - Pulls & Plates 700 ____ A25 How to Order: Hinges & Pivots Pin and Barrel Hinges Canada 1.905.403.1800 www.ives.ingersollrand.com A25 A26 Hinges & Pivots Continuous Hinges Pin and Barrel Hinges - Clearance Requirements B C D Latches, Catches & Bolts E Stops Flush Bolts & Coordinators Pulls & Plates 1/8” Hinge Side Clearance 3/16” Hinge Side Clearance Hinge Side Clearance 1/32” Frame Irregularity 1/16” Frame Irregularity SINGLE DOOR Model 600 602 700 702 705 705* 711 715 Hinge-Side Clearance 1/4" 1/8" 1/4" 1/8" 3/8" 1/2" 7/32" 1/4" Lock-Side Frame Beveled Door Clearance Irregularity Clearance 1/8" 1/8" 1/8" 1/8" 1/8" 1/8" 1/8" 1/8" 1/32" 1/32" 1/32" 1/32" 1/32" 1/32" 1/32" 1/32" 1/32" 1/32" 1/32" 1/32" 1/32" 1/32" 1/32" 1/32" Door Under-Sizing Square Beveled Edged Edged 13/32" 9/32" 13/32" 9/32" 17/32" 21/32" 3/8" 13/32" 7/16" 5/16" 7/16" 5/16" 9/16" 11/16" 13/32" 7/16" * Use the Adjusta-Studs with 705 F Exterior Hardware G Miscellaneous Hardware PAIR OF DOORS Model 600 602 700 702 705 705* 711 715 Hinge-Side Clearance 1/4" 1/8" 1/4" 1/8" 3/8" 1/2" 7/32" 1/4" Square Lock-Side Frame Beveled Door Edged Clearance Irregularity Clearance Total 3/16" 3/16" 3/16" 3/16" 3/16" 3/16" 3/16" 3/16" 1/16" 1/16" 1/16" 1/16" 1/16" 1/16" 1/16" 1/16" 1/16" 1/16" 1/16" 1/16" 1/16" 1/16" 1/16" 1/16" 3/4" 1/2" 3/4" 1/2" 1" 1-1/4" 11/16" 3/4" Door Under-Sizing Square Beveled Beveled Edged Edged Edged Each Door Total Each Door 3/8" 1/4" 3/8" 1/4" 1/2" 5/8" 11/32" 3/8" 13/16" 9/16" 13/16" 9/16" 1-1/16" 1-5/16" 3/4" 13/16" 13/32" 9/32" 13/32" 9/32" 17/32" 21/32" 3/8" 13/32" * Use the Adjusta-Studs with 705 A26 USA 1.877.671.7011 Canada 1.905.403.1800 www.ives.ingersollrand.com Continuous Hinges Full Mortise Pin and Barrel Continuous Hinge For Doors Weighing up to 600 pounds • Non Handed • 1/8” Inset • 48" Maximum Door Width • Non Handed • Bevel or Square Edge Door E Exterior Hardware F Miscellaneous Hardware G 2-1/4 ” 1-3/4” Clearance for Square Edge 5/16" Clearance for Beveled Edge Custom Paint Available, on 600 consult factory. 602 702 Stops US32D D USP Latches, Catches & Bolts US Numbers C 700 630 Flush Bolts & Coordinators 1/8” GA 0.075” Hi n ge T h i ck n es s 1/16” 600 600 0 3/8” 1/4 ” Finishes BHMA B Material 600- 1012 Cold-Rolled Steel 700- 14 Gauge Type 304 Stainless Steel 1/4" Diameter 304 Stainless Pin with Nylon Split Bearing 1/2” 1/8" Pulls & Plates Standard lengths 83", 85", 95", 120" Standard Mounting Hardware #10 X 1/2" Self Drilling Self Tapping Screws, #10 X 1" Wood Screws Optional SEC - Security Fasteners Available A27 Hinges & Pivots 600 700 Full Surface Pin and Barrel Continuous Hinge For Doors Weighing up to 600 pounds • Non Handed • Flush Mounted, No Inset • 48" Maximum Door Width • Bevel or Square Edge Door G Standard lengths 83", 85", 95", 120" Standard Mounting Hardware 1/4"-20 x 3/4" Self Drilling Self Tapping Screws, Cover Clips Optional SEC - Security Fasteners Available Material 602- 1012 Cold-Rolled Steel 702 - 14 Gauge Type 304 Stainless Steel 1/4" Diameter 304 Stainless Pin with Nylon Split Bearing Brushed Aluminum Leaf Covers Finishes BHMA 602 600 702 630 US Numbers USP US32D Custom Paint Available, on 602 consult factory USA 1.877.671.7011 Canada 1.905.403.1800 www.ives.ingersollrand.com 0.060" [ 2 [50.8] 1-3/4” 1-3/4” [5.6] HINGE ALLOWANCE 7/16” 3/8” GA 0.075” Hi n ge T h i ck n es s 1-3/4” 1/8” Clearance for Square Edge 5/32" Clearance for Beveled Edge A27 B Hinges & Pivots Pulls & Plates Material 611- 1012 Cold-Rolled Steel 711- 14 Gauge Type 304 Stainless Steel 1/4" diameter 304 stanless pin with nylon split bearings Flush Bolts & Coordinators C Standard lengths 83", 85", 95", 120" Standard Mounting Hardware #10 X 1/2" Self Drilling Self Tapping Screws #10 X 1" Wood Screws Optional SEC - Security Fasteners Available Latches, Catches & Bolts D Swing Clear Pin and Barrel Continuous Hinge For Doors Weighing up to 600 pounds • Non Handed • Edge Guard • 48" Maximum Door Width • Square Edge Door Finishes BHMA 611 600 711 630 US Numbers USP US32D 1-3/8” 3/8” 1-9/16” 1-3/4” 3/4” 5/32” Clearance for 7/32" Square Edge 1/4" Clearance for Beveled Edge 705 Full Moritse, Full Wrap Pin and Barrel Continuous Hinge For Doors Weighing up to 600 pounds • Non Handed • Flush Mounted, No Inset • 48" Maximum Door Width • Full Wrap Edge Guard • Bevel or Square Edge Door Standard lengths 83", 85", 95", 120" Standard Mounting Hardware #10 X 1/2" Self Drilling Self Tapping Screws, #10 X 1" Wood Screws Adjusta-stud 1-3/8" with 10-32 internal thread Optional SEC - Security Fasteners Available. Material 14 Gauge Type 304 Stainless Steel 1/4" diameter 304 stanless pin with nylon split bearings GA 0.075” H i n g e T h i c k n e s s G Finishes BHMA US Numbers 2-1/4” 630 GA 0.0625” 3/8” 1-7/8” Miscellaneous Hardware GA 0.075” Hi n ge T h i ck n es s 1/4” Custom Paint Available, on 611 consult factory Stops E F 611 711 Exterior Hardware A28 Continuous Hinges Note: Provide 0.125” Adjustment 1-3/4” GA 0.075” US32D 3/4” 3/8 ” 3/16” 3/8" Clearance for * Adjusta-Stud allows up to 3/8” width adjustment which ensures proper alignment and easy installation. Adjusta-Stud also makes it possible for future adjustments of the door on the frame through repositioning. Square Edge 13/32" Clearance for Beveled Edge A28 USA 1.877.671.7011 Canada 1.905.403.1800 www.ives.ingersollrand.com Continuous Hinges G Clearance for Square Edge Miscellaneous Hardware 11/4" /4” F 3/4” Exterior Hardware 1-3/4” E US32D Custom Paint Available, consult factory Stops 3/8” D 630 Latches, Catches & Bolts US Numbers GA 0.075” Hi n ge T h i ck n es s 1/4” C Finishes BHMA Flush Bolts & Coordinators Material 14 Gauge Type 304 Stainless Steel 1/4" diameter 304 stanless pin with nylon split bearings B Standard lengths 83", 85", 95", 120" Standard Mounting Hardware #10 X 1/2" Self Drilling Tek Screws, #10 X 1" Wood Screws Optional SEC - Security Fasteners Available Pulls & Plates For Doors Weighing up to 600 pounds • Non Handed • Flush Mounted, No Inset • Half Wrap Edge Guard • 48" Maximum Door Width • Square Edge Door A29 Full Mortise, Half Wrap Pin and Barrel Continuous Hinge Hinges & Pivots 715 4/32" Clearance for Beveled Edge USA 1.877.671.7011 Canada 1.905.403.1800 www.ives.ingersollrand.com A29 A30 Hinges & Pivots Continuous Hinges EPT 600/700 TW 600/700 Electrical Cutouts Top of door B Pulls & Plates Top of door C D Latches, Catches & Bolts E F Exterior Hardware G Miscellaneous Hardware Stops Flush Bolts & Coordinators “C L EPT” “C L TW” Ives Pin & Barrel Continuous Hinges are available with factory modified cutouts to accommodate most electrical frame to door requirements. Special templates are required. When ordering indicate the following: 1. Opening size. 2. Handing. LH, RH, RHR or LHR. 3. Manufacturer and model number of the electrical product being used. Example; Von Duprin EPT2 Because clearances may vary between door and frame manufacturer, and locations can be influenced by the door hardware it is always recommend contacting Ives Customer Technical for specific template information. For your general information following are standard locations for Von Duprin EPT2 or EPT10, and TW (through wire) Standard centerline cutout locations From Top Edge o top of Door to Center Line of Cut-Out Standard Length 83" 85" 95" 120" EPT 30" 32" 42" 67" TW 43-19/32" 45-17/32" 55-17/32" 80-17/32" A30 USA 1.877.671.7011 Canada 1.905.403.1800 www.ives.ingersollrand.com Pivots Latches, Catches & Bolts D Stops E Exterior Hardware F Miscellaneous Hardware G www.ives.ingersollrand.com C Canada 1.905.403.1800 Flush Bolts & Coordinators USA 1.877.671.7011 B Pocket Pivots 91105 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A50 91105F . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A50 Pulls & Plates page General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A32 Selection Chart and Parts Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . .A32 How To Order . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A33 7212 . . . . . . . . . . . . . . . .3/4" Offset . . . . . . . . . . . . . . . . . . . . . . . . .A34 7212V . . . . . . . . . . . . . . .3/4" Offset . . . . . . . . . . . . . . . . . . . . . . . . .A34 7215, 7215F . . . . . . . . . .3/4" Offset . . . . . . . . . . . . . . . . . . . . . . . . .A35 7222 . . . . . . . . . . . . . . . .3/4" Offset . . . . . . . . . . . . . . . . . . . . . . . . .A36 7226, 7226F . . . . . . . . . .3/4" Offset . . . . . . . . . . . . . . . . . . . . . . . . .A37 7227, 7227F . . . . . . . . . .3/4" Offset . . . . . . . . . . . . . . . . . . . . . . . . .A38 7230F . . . . . . . . . . . . . . .3/4" Offset . . . . . . . . . . . . . . . . . . . . . . . . .A39 7237F . . . . . . . . . . . . . . .3/4" Offset . . . . . . . . . . . . . . . . . . . . . . . . .A40 7244F . . . . . . . . . . . . . . .1-1/2" Offset . . . . . . . . . . . . . . . . . . . . . . .A41 7245F . . . . . . . . . . . . . . .1-1/2" Offset . . . . . . . . . . . . . . . . . . . . . . . .A42 7212-722V-7222 INT . . . .Intermediate . . . . . . . . . . . . . . . . . . . . . . . . .A43 7215-7226-7227 INT . . . .Intermediate . . . . . . . . . . . . . . . . . . . . . . . . .A43 7215F-7226F-7227F INT .Intermediate . . . . . . . . . . . . . . . . . . . . . . . . .A43 7230F-7237F INT . . . . . . .Intermediate . . . . . . . . . . . . . . . . . . . . . . . . .A44 7244F-7245F INT . . . . . . .Intermediate . . . . . . . . . . . . . . . . . . . . . . . . .A44 7215PT-7226PT-7227PT .Intermediate, Electrified . . . . . . . . . . . . . . . .A45 7253 . . . . . . . . . . . . . . . .Center Hung . . . . . . . . . . . . . . . . . . . . . . . .A46 7255 . . . . . . . . . . . . . . . .Center Hung . . . . . . . . . . . . . . . . . . . . . . . .A47 7255J . . . . . . . . . . . . . . .Center Hung . . . . . . . . . . . . . . . . . . . . . . . .A47 7256 . . . . . . . . . . . . . . . .Center Hung . . . . . . . . . . . . . . . . . . . . . . . .A48 7259 . . . . . . . . . . . . . . . .Center Hung . . . . . . . . . . . . . . . . . . . . . . . .A49 A31 Pivots Table Of Contents Hinges & Pivots The door rests on the bottom pivot in this application. This reduces the stress on the frame by distributing the weight of the door throughout the floor and structure. By taking advantage of the strength of the structure, this makes a pivot the ideal solution for your heavy doors. Center and pocket pivots also provide an aesthetic option for your opening. A31 A32 B Pulls & Plates Flush Bolts & Coordinators C D Latches, Catches & Bolts Stops E F Exterior Hardware Miscellaneous Hardware G Hinges & Pivots Pivots 7200 Series Pivots General Information: Complete line of 3/4" offset, 1-1/2" offset, center hung, intermediate and power transfer pivots with all exposed parts made of brass or stainless steel for maximum corrosion resistance. High strength brass and stainless steel forgings, and castings for rated and non-rated doors combined with precision bearings for smooth operation. Stainless steel machine screws and wood screws standard. Positive locking vertical adjustment mechanism allows the installer to precisely position the door and balance the load. Last digit in pivot set number reflects the maximum door weight in hundreds of pound, e.g., 7215 = 500 pounds. For sets designated as “heavy duty”, add 1,000 pounds, e.g., 7237F HD set = 1700 pounds. Pivots for lead lined doors are available, consult factory. 7200 series Pivot Selection Chart Pivot Set Pivot Type Bottom Mounting Style UL Listing 7212 Max. Door Weight Handing 3/4" Offset Jamb Mounted none 200 LH or RH 7212V 3/4" Offset Jamb Mounted none 200 7215 3/4" Offset Jamb Mounted 20 Minute 500 7215F 3/4" Offset Jamb Mounted 3 Hour 500 7222 3/4" Offset Floor Mounted none 7226 3/4" Offset Floor Mounted 20 Minute 7226F 3/4" Offset Floor Mounted 3 Hour 600 7227 3/4" Offset Mortise Cement Case 20 Minute 700 Non-Handed 7212-7215-7222-7226-7227 TOP 7227 BTM 7215-7226-7227 INT 7227F 3/4" Offset Mortise Cement Case 3 Hour 700 Non-Handed 7215F-7226F-7227F TOP 7227F BTM 7215-7226-7227 INT 7230F 3/4" Offset Floor Mounted 3 Hour 1,000 Non-Handed 7230F-7237F TOP 7230F BTM 7215F-7226F-7227F INT 7237F 3/4" Offset Mortise Cement Case 3 Hour 1,750 Non-Handed 7230F-7237F TOP 7237F BTM 7230F-7237F INT 7244F 1-1/2" Offset Floor Mounted 3 Hour 400 Non-Handed 7244F-7245F TOP 7244F BTM 7230F-7237F INT 7245F 1-1/2" Offset Mortise Cement Case 3 Hour 500 Non-Handed 7244F-7245F TOP 7245F BTM 7244F-7245F INT 7253 Center Hung Floor Mounted none 300 Non-Handed 7253-7255-7255J-7256 TOP 7253 BTM 7244F-7245F INT 7255 Center Hung Floor Mounted none 500 Non-Handed 7253-7255-7255J-7256 TOP 7255 BTM none 7255J Center Hung Jamb Mounted none 500 Non-Handed 7253-7255-7255J-7256 TOP 7255J BTM none 7256 Center Hung Mortise Cement Case none 600 Non-Handed 7253-7255-7255J-7256 TOP 7256 BTM none 7259 Center Hung Mortise Cement Case none 1,000 Non-Handed 7259 TOP 7259 BTM none Top When Ordering Separate Parts Bottom Intermediate 7212-7215-7222-7226-7227 TOP 7212 BTM 7212-7212V-7222 INT LH or RH 7212V TOP 7212 BTM 7212-7212V-7222 INT LH or RH 7212-7215-7222-7226-7227 TOP 7215 BTM 7215-7226-7227 INT LH or RH 7215F-7226F-7227F TOP 7215F BTM 7215F-7226F-7227F INT 200 LH or RH 7212-7215-7222-7226-7227 TOP 7222 BTM 7212-7212V-7222 INT 600 Non-Handed 7212-7215-7222-7226-7227 TOP 7226 BTM 7215-7226-7227 INT Non-Handed 7215F-7226F-7227F TOP 7226F BTM 7215F-7226F-7227F INT A32 USA 1.877.671.7011 Canada 1.905.403.1800 www.ives.ingersollrand.com Pivots E Exterior Hardware F Miscellaneous Hardware G www.ives.ingersollrand.com Stops Canada 1.905.403.1800 D USA 1.877.671.7011 Latches, Catches & Bolts Finish: US3 US4 US10 US10B US26 US26D SP4 SP10 SP28 SP313 SPBLK USP optional finishes are available, consult factory C Left hand door Right hand door Flush Bolts & Coordinators Hand: LH RH B Pivot Style: Blank Top and bottom set TOP Top pivot only BTM Bottom pivot only INT Intermediate pivot only PT INT Power transfer intermendiate pivot only Pulls & Plates Pivot: 7212 7212V 7215 7215F 7222 7226 7226F 7227 7227F 7230F 7237F 7244F 7245F 7253 7255 7255J 7256 7259 A33 7212 - ___ - ____LH US3 ____ ____ Hinges & Pivots How to Order: A33 A34 Hinges & Pivots B Pulls & Plates Pivots 7212 3/4" Offset Pivot • • • • • • Handed Top, header mount Bottom, jamb mount Use with 1-3/4" minimum door thickness, with 1/8" bevel in 2" Maximum door load 200 pounds Vertical adjustment range 3/16", with positive locking Optional 7212-7212V-7222 Intermediate Pivot (handed) for each additional 100 pounds or doors over 7'. See page A47. C D E Stops F G Miscellaneous Hardware Exterior Hardware Latches, Catches & Bolts Flush Bolts & Coordinators Meets ANSI/BHMA A156.4 C07131 7212V Pivot Set 7212V 3/4" Offset Pivot • • • • • • Handed Top, jamb mount Bottom, jamb mount Use with 1-3/4" minimum door thickness, with 1/8" bevel in 2" Maximum door load 200 pounds Vertical adjustment range 3/16", with positive locking Optional 7212-7212V-7222 Intermediate Pivot (handed) for each additional 100 pounds or doors over 7'. See page A47. Plated Finishes brass US Number US3 US4 US10 US10B US26 US26D 626 BHMA Number 605 606 Painted Finishes brass US Number SP4 SP10 612 613 625 SP28 SP313 SPBLK BHMA Number 706 689 695 622 691 A34 USA 1.877.671.7011 Canada 1.905.403.1800 www.ives.ingersollrand.com Pivots 7215F Plated Finishes steel US Number US3 US10 BHMA Number 632 639 US32 629 US32D 630 Painted Finishes steel US Number SP4 SP10 SP28 SP313 SPBLK BHMA Number 706 689 695 622 www.ives.ingersollrand.com 691 G SPBLK 622 Miscellaneous Hardware SP313 695 F SP28 689 Exterior Hardware Painted Finishes brass US Number SP4 SP10 BHMA Number 706 691 E US26 625 Stops US10B 613 D Canada 1.905.403.1800 US10 612 Latches, Catches & Bolts USA 1.877.671.7011 7215 Plated Finishes brass US Number US3 US4 BHMA Number 605 606 C 7215F - UL Listed 3 hour fire doors Flush Bolts & Coordinators 7215 - Ul Listed 20 minute fire doors B Optional 7215-7226-7227 or 7215F-7226F-7227F Intermediate Pivot (handed) for each additional 100 pounds or doors over 7'. See page A47. Optional 7215PT Power Transfer, non-load bearing. See page A49 Pulls & Plates Meets ANSI/BHMA A156.4 C07131 Handed Top, header mount Bottom, jamb mount Use with 1-3/4" minimum door thickness, with 1/8" bevel in 2" Maximum door load 500 pounds Vertical adjustment range 3/16", with positive locking WP - optional weather resistant bottom pivot is modified for improved corrosion resistance. Available in US26D (626) or US32D (630) only. A35 • • • • • • • Hinges & Pivots 7215 7215F 3/4" Offset Pivot US26D 626 A35 A36 Hinges & Pivots B C D E Stops F Exterior Hardware Miscellaneous Hardware G 7222 3/4" Offset Pivot • • • • • • Handed Top, header mount Bottom, base plate mount Use with 1-3/4" minimum door thickness, with 1/8" bevel in 2" Maximum door load 200 pounds Vertical adjustment range 3/16", with positive locking Optional 7212-7212V-7222 Intermediate Pivot (handed) for each additional 100 pounds or doors over 7'. See page A47. Meets ANSI/BHMA A156.4 C07162 Latches, Catches & Bolts Flush Bolts & Coordinators Pulls & Plates Pivots Plated Finishes brass US Number US3 US4 BHMA Number 605 606 US10 612 US10B 613 US26 625 Painted Finishes brass US Number SP4 SP10 SP28 SP313 SPBLK BHMA Number 706 689 695 622 691 US26D 626 A36 USA 1.877.671.7011 Canada 1.905.403.1800 www.ives.ingersollrand.com Pivots 625 626 Painted Finishes brass US Number SP4 SP10 SP28 SP313 SPBLK BHMA Number 706 691 689 695 622 7226F Plated Finishes steel US Number US3 US10 US32 US32D BHMA Number 632 629 630 Painted Finishes steel US Number SP4 SP10 SP28 SP313 SPBLK BHMA Number 706 689 695 622 www.ives.ingersollrand.com 639 691 G 613 Miscellaneous Hardware 612 606 F BHMA Number 605 Exterior Hardware US26D E US26 Stops US10B D Canada 1.905.403.1800 US10 Latches, Catches & Bolts USA 1.877.671.7011 7226 Plated Finishes brass US Number US3 US4 C 7226F - UL Listed 3 hour fire doors Flush Bolts & Coordinators 7226 - Ul Listed 20 minute fire doors Optional 7215-7226-7227or 7226F-722 Intermediate Pivot (handed) for each additional 100 pounds or doors over 7'. See page A47. Optional 7226PT Power Transfer (four wires), non-load bearing. See page A49 B Meets ANSI/BHMA A156.4 C07162 Pulls & Plates Non-handed Top, header mount Bottom, base plate mount Use with 1-3/4" minimum door thickness, with 1/8" bevel in 2" Maximum door load 600 pounds Vertical adjustment range 3/16", with positive locking A37 • • • • • • Hinges & Pivots 7226 7226F 3/4" Offset Pivot A37 A38 B 7227 7227F 3/4" Offset Pivot • • • • • • Pulls & Plates Flush Bolts & Coordinators D Latches, Catches & Bolts E F G Miscellaneous Hardware Exterior Hardware Stops C Hinges & Pivots Pivots Non-handed Top, header mount Bottom, base plate mount Use with 1-3/4" minimum door thickness, with 1/8" bevel in 2" Maximum door load 700 pounds Vertical adjustment range 3/16", with positive locking Meets ANSI/BHMA A156.4 C07121 7227 - Ul Listed 20 minute fire doors 7227F - UL Listed 3 hour fire doors Optional 7215-7226-7227 or 7215F-7226F-7227F Intermediate Pivot (handed) for each additional 100 pounds or doors over 7'. See page A47. Optional 7227PT Power Transfer (four wires), non-load bearing. See page A49. 7227 Plated Finishes brass US Number US3 US4 US10 US10B US26 US26D BHMA Number 605 612 613 625 626 Painted Finishes brass US Number SP4 SP10 BHMA Number 706 691 SP28 689 SP313 695 SPBLK 622 7227F Plated Finishes steel US Number US3 US10 US32 US32D BHMA Number 632 629 630 Painted Finishes steel US Number SP4 SP10 SP28 SP313 SPBLK BHMA Number 706 689 695 622 606 639 691 A38 USA 1.877.671.7011 Canada 1.905.403.1800 www.ives.ingersollrand.com Pivots Pulls & Plates B Flush Bolts & Coordinators C Latches, Catches & Bolts D Stops E Exterior Hardware F Miscellaneous Hardware G Non-Handed Top, header mount Bottom, base plate mount Use with 1-3/4" minimum door thickness, with 1/8" bevel in 2" Maximum door load 1,000 pounds Vertical adjustment range 3/16", with positive locking A39 • • • • • • Hinges & Pivots 7230F 3/4" Offset Pivot - Heavy Duty Optional 7230F-7237F Intermediate Pivot (handed) for each additional 100 pounds or doors over 7'. See page A48. Meets ANSI/BHMA A156.4 C07162 UL Listed 3 Hour Fire Doors USA 1.877.671.7011 Canada 1.905.403.1800 Plated Finishes steel US Number US3 US10 US32 US32D BHMA Number 632 629 630 Painted Finishes steel US Number SP4 SP10 SP28 SP313 SPBLK BHMA Number 706 689 695 622 639 www.ives.ingersollrand.com 691 A39 A40 B Pulls & Plates C D E Stops F G Miscellaneous Hardware Exterior Hardware Latches, Catches & Bolts Flush Bolts & Coordinators Hinges & Pivots Pivots 7237F 3/4" Offset Pivot - Heavy Duty • • • • • • Non-Handed Top, header mount Bottom, mortised cement case mount Use with 1-3/4" minimum door thickness, with 1/8" bevel in 2" Maximum door load 1,750 pounds Vertical adjustment range 3/16", with positive locking Optional 7230F-7237F Intermediate Pivot (handed) for each additional 100 pounds or doors over 7'. See page A48. Meets ANSI/BHMA A156.4 C07111 UL Listed 3 Hour Fire Doors Plated Finishes steel US Number US3 US10 US32 US32D BHMA Number 632 639 Painted Finishes steel US Number SP4 SP10 629 630 SP28 SP313 SPBLK BHMA Number 706 689 695 622 691 A40 USA 1.877.671.7011 Canada 1.905.403.1800 www.ives.ingersollrand.com Pivots Miscellaneous Hardware G SPBLK 622 F SP313 695 Exterior Hardware SP28 689 E www.ives.ingersollrand.com 630 Stops Canada 1.905.403.1800 629 D USA 1.877.671.7011 US32D Latches, Catches & Bolts BHMA Number 632 639 Painted Finishes steel US Number SP4 SP10 BHMA Number 706 691 US32 C Plated Finishes steel US Number US3 US10 Flush Bolts & Coordinators Meets ANSI/BHMA A156.4 C07162 UL Listed 3 Hour Fire Doors B Optional 7244F-7245F Intermediate Pivot (handed) for each additional 100 pounds or doors over 7'. See page A48. Pulls & Plates Non-Handed Top, header mount Bottom, base mount Use with 1-3/4" minimum door thickness Maximum door load 400 pounds Vertical adjustment range 3/16", with positive locking A41 • • • • • • Hinges & Pivots 7244F 1-1/2" Offset Pivot - Heavy Duty A41 A42 B Pulls & Plates C Flush Bolts & Coordinators D E Stops F G Miscellaneous Hardware Exterior Hardware Latches, Catches & Bolts Hinges & Pivots Pivots 7245F 1-1/2" Offset Pivot - Heavy Duty • • • • • • Non-Handed Top, header mount Bottom, mortised cement case mount Use with 1-3/4" minimum door thickness, with 1/8" bevel in 2" Maximum door load 500 pounds Vertical adjustment range 3/16", with positive locking Optional 7244F-7245F Intermediate Pivot (handed) for each additional 100 pounds or doors over 7'. See page A48. Meets ANSI/BHMA A156.4 C07121 UL Listed 3 Hour Fire Doors Plated Finishes steel US Number US3 US4 BHMA Number 632 639 Painted Finishes steel US Number SP4 SP10 BHMA Number 706 691 US10 US10B US26 US26D 612 613 625 626 SP28 689 SP313 695 SPBLK 622 A42 USA 1.877.671.7011 Canada 1.905.403.1800 www.ives.ingersollrand.com Intermediate Pivots Hinges & Pivots A43 Pulls & Plates B Flush Bolts & Coordinators C Latches, Catches & Bolts D Stops E Exterior Hardware F Miscellaneous Hardware G NFPA 80, Section 3-3.8 requires intermediate pivot on some fire door applications, consult factory. Use for door heights over 7'0" and one every 2'6" or . Use for door weight over the pivot set limit. One additional for every additional 100 pounds. Door thickness 1-3/4" mimumum with 1/8" bevel in 2". 7212-7212V-7222 INT Meets ANSI/BHMA A156.4 C07382 • Use with 7212, 7212V or 7222 3/4 Offset Pivot • Handed • Vertical adjustment 3/16", include positive locking. 7215-7226-7227 INT • Use with 7215, 7226 or 7227 3/4 Offset Pivot • Handed • Vertical adjustment 3/16", include positive locking. 7215-7226-7227 INT: UL listed 20 minute fire doors Meets ANSI/BHMA A156.4 C07321 7215F-7226F-7227F INT: UL listed 3 hour fire doors Meets ANSI/BHMA A156.4 C07371 USA 1.877.671.7011 Canada 1.905.403.1800 7215F-7226F-7227F INT • Use with 7215F, 7226F or 7227F 3/4 Offset Pivot • Handed • Vertical adjustment 3/16", include positive locking. www.ives.ingersollrand.com A43 A44 B C Flush Bolts & Coordinators D E 7230F-7237F INT • Use with 7230F or 7237F 3/4 Offset Pivot • Handed • Vertical adjustment 3/16", include positive locking. UL listed 3 hour fire doors Meets ANSI/BHMA A156.4 C07311 7244F-7245F • Use with 7244F or 7245F 1-1/2" Offset Pivot • Handed • Vertical adjustment 3/16", include positive locking. Stops Latches, Catches & Bolts Pulls & Plates Hinges & Pivots Intermediate Pivots F Exterior Hardware G Miscellaneous Hardware UL listed 3 hour fire doors Meets ANSI/BHMA A156.4 C07371 A44 USA 1.877.671.7011 Canada 1.905.403.1800 www.ives.ingersollrand.com Pivots SP28 689 SP313 695 SPBLK 622 www.ives.ingersollrand.com G 626 Miscellaneous Hardware 625 F 613 Exterior Hardware 612 E BHMA Number 605 606 Painted Finishes brass US Number SP4 SP10 BHMA Number 706 691 Stops US26D D US26 Latches, Catches & Bolts US10B C Canada 1.905.403.1800 US10 Flush Bolts & Coordinators USA 1.877.671.7011 US4 B Plate Finishes brass US Number US3 Pulls & Plates Use with 7215, 7226 or 7227 3/4" Offset Pivots Four wires, 28 guage Optional 8 wire available Rated 50 VDC or VAC @ 3.5 amps. Continuous or 16 amps pulse, maximum pulse 400 milliseconds. • Non-load bearing • Use with 1-3/4" thick door mimimum, 1/8" bevel in 2". A45 • • • • Hinges & Pivots 7215PT-7226PT-7227PT Power Transfer Pivot A45 A46 Hinges & Pivots B Pulls & Plates Pivots 7253 Center Hung Pivot • • • • • • • • Non-Handed Top, header mount Bottom, base plate mount Easy installation tilt on bearing and bearing pin. Use with 1-3/4" minimum door thickness. Adjustable floor to door clearance 3/16" to 3/4". Maximum door load 300 pounds Vertical adjustment range 3/16", with positive locking C D Latches, Catches & Bolts E F Exterior Hardware Stops Flush Bolts & Coordinators Plated Finishes brass US Number US3 US4 Meets ANSI/BHMA A156.4 C07032 BHMA Number 605 606 Painted Finishes brass US Number SP4 SP10 BHMA Number 706 691 US10 US10B US26 US26D 612 613 625 626 SP28 689 SP313 695 SPBLK 622 • Radius Stop (A) to clear heel of door edge. • Pivot distance (B) 1-3/4" (44mm) mimumum from jamb to centerline of pivot pin. Radius heel edge of door, 1-5/8" (41mm) mimumum recommended. • Clearance from bottom edge of door to floor mounting surface is adjustable from 3/16" (5mm) to 3/4" (19mm) by varing the depth of the mortise (C ) in the bottom of the door, refer to Chart D. Consult factory when clearance is over 3/4" (19mm). G Miscellaneous Hardware Table D Clearance Depth of Mortise 3/16" (5mm) 3/8" (10mm) 1/2" (13mm) 5/8" (16mm) 3/4" (19mm) 1-3/16" (30mm) 1" (25mm) 7/8" (22mm) 3/4" (19mm) 5/8" (16mm) A46 USA 1.877.671.7011 Canada 1.905.403.1800 www.ives.ingersollrand.com Pivots B Flush Bolts & Coordinators C Latches, Catches & Bolts D Stops E Exterior Hardware F Miscellaneous Hardware G Non-Handed Top, header mount Bottom, base plate mount Easy installation tilt on bearing and bearing pin. Use with 1-3/4" minimum door thickness. Adjustable floor to door clearance 3/16" to 3/4", consultant factory if greater than 3/4".. • Maximum door load 500 pounds • Vertical adjustment range 3/16", with positive locking Pulls & Plates • • • • • • A47 Center Hung Pivot Hinges & Pivots 7255 Meets ANSI/BHMA A156.4 C07032 • Radius Stop (A) to clear heel of door edge. • Pivot distance (B) 1-3/4" (44mm) mimumum from jamb to centerline of pivot pin. Radius heel edge of door, 1-5/8" (41mm) mimumum recommended. • Clearance from bottom edge of door to floor mounting surface is adjustable from 3/16" (5mm) to 3/4" (19mm) by varing the depth of the mortise (C ) in the bottom of the door, refer to Chart D. Consult factory when clearance is over 3/4" (19mm). 7255J Center Hung Pivot • • • • • • Non-Handed Top, header mount Bottom, jamb mount Easy installation tilt on bearing and bearing pin. Use with 1-3/4" minimum door thickness. Adjustable floor to door clearance 3/16" to 3/4", consult factory if greater than 3/4". • Maximum door load 500 pounds • Vertical adjustment range 3/16", with positive locking Meets ANSI/BHMA A156.4 C07042 USA 1.877.671.7011 Canada 1.905.403.1800 www.ives.ingersollrand.com A47 A48 B Pulls & Plates C D Latches, Catches & Bolts E F Center Hung Pivot • • • • • • Non-Handed Top, header mount Bottom, base frame mount Easy installation tilt on bearing and bearing pin. Use with 1-3/4" minimum door thickness. Adjustable floor to door clearance 3/16" to 3/4", consult factory if greater than 3/4". • Maximum door load 600 pounds • Vertical adjustment range 3/16", with positive locking Meets ANSI/BHMA A156.4 C07021 Miscellaneous Hardware G 7256 Exterior Hardware Stops Flush Bolts & Coordinators Hinges & Pivots Pivots • Radius Stop (A) to clear heel of door edge. • Pivot distance (B) 1-3/4" (44mm) mimumum from jamb to centerline of pivot pin. Radius heel edge of door, 1-5/8" (41mm) mimumum recommended. • Clearance from bottom edge of door to floor mounting surface is adjustable from 3/16" (5mm) to 3/4" (19mm) by varing the depth of the mortise (C ) in the bottom of the door, refer to Chart D. Consult factory when clearance is over 3/4" (19mm). Table D Clearance Depth of Mortise 3/16" (5mm) 3/8" (10mm) 1/2" (13mm) 5/8" (16mm) 3/4" (19mm) 1-3/16" (30mm) 1" (25mm) 7/8" (22mm) 3/4" (19mm) 5/8" (16mm) Plated Finishes brass US Number US3 US4 BHMA Number 605 606 Painted Finishes brass US Number SP4 SP10 BHMA Number 706 691 US10 US10B US26 US26D 612 613 625 626 SP28 689 SP313 695 SPBLK 622 A48 USA 1.877.671.7011 Canada 1.905.403.1800 www.ives.ingersollrand.com Pivots Canada 1.905.403.1800 www.ives.ingersollrand.com US26 US26D 612 613 625 626 SP28 689 SP313 695 SPBLK 622 G USA 1.877.671.7011 US10B Miscellaneous Hardware BHMA Number 605 606 Painted Finishes brass US Number SP4 SP10 BHMA Number 706 691 US10 F 1-3/16" (30mm) 1" (25mm) 7/8" (22mm) 3/4" (19mm) 5/8" (16mm) Exterior Hardware 3/16" (5mm) 3/8" (10mm) 1/2" (13mm) 5/8" (16mm) 3/4" (19mm) E Plated Finishes brass US Number US3 US4 Stops Depth of Mortise D Clearance Latches, Catches & Bolts Table D C • Radius Stop (A) to clear heel of door edge. • Pivot distance (B) 1-3/4" (44mm) mimumum from jamb to centerline of pivot pin. Radius heel edge of door, 1-5/8" (41mm) mimumum recommended. • Clearance from bottom edge of door to floor mounting surface is adjustable from 3/16" (5mm) to 3/4" (19mm) by varing the depth of the mortise (C ) in the bottom of the door, refer to Chart D. Consult factory when clearance is over 3/4" (19mm). Flush Bolts & Coordinators Meets ANSI/BHMA A156.4 C07011 B Non-Handed Top, header mount Bottom, base frame mount Easy installation tilt on bearing and bearing pin. Use with 2" minimum door thickness. Adjustable floor to door clearance 3/16" to 3/4", consult factory if greater than 3/4". • Maximum door load 1,000 pounds • Vertical adjustment range 3/16", with positive locking Pulls & Plates • • • • • • A49 Center Hung Pivot Hinges & Pivots 7259 A49 A50 Hinges & Pivots B Pulls & Plates Pivots 91105F, 91105F-PT Pocket Pivot/Hinge • • • • • • • Non-handed All stainless steel construction. Allows door to open a full 90 (* degree mark) Full mortise 90 pound load bearing Use two for doors up to 7'0" and over 7'0" use three. PT, Power Transfer version has four 28 guage wires. Rated 50 VOC or VAC @ 3.5 amps. Continuous or 16 amps pulse. Maximum pulse 400 milliseconds. 91105F Pocket Pivot C Flush Bolts & Coordinators D Latches, Catches & Bolts UL Listed 3 hour fire doors or 20 minute wood fire doors Meets ANSI/BHMA A156.4 C07611 Cutout Pocket Pivot 1-3/8 1-1/8 1-9/64 Stops E 1-9/64 5-17/32 Jamb Portion F G Miscellaneous Hardware Exterior Hardware 1-1/8 Door Portion CL of Door Plated Finishes steel US Number US3 US10 BHMA Number 632 639 US10B 640 Painted Finishes steel US Number USP SP313 BHMA Number 600 695 Finishes stainless steel US Number US32 US32D BHMA Number 629 630 A50 USA 1.877.671.7011 Canada 1.905.403.1800 www.ives.ingersollrand.com Pulls & Plates Latches, Catches & Bolts D Stops E Exterior Hardware F Miscellaneous Hardware G Mounting Detail Special Mounting Detail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B15-17 C Protection Plates 8400 Protection Plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B13-14 8402 Protection Plate (UL) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B13-14 Flush Bolts & Coordinators Vandal Resistant Trim VR810-DT, VR814DT Vandal Resistant Trim . . . . . . . . . . . . . . . . . . . . . . .B10 VR810-NL, VR814-NL Vandal Resistant Trim . . . . . . . . . . . . . . . . . . . . . .B10 VR900, VR904 Vandual Resistant Trim . . . . . . . . . . . . . . . . . . . . . . . . . . .B11 VR900LLP, VR904LLP Vandual Resistant Trim . . . . . . . . . . . . . . . . . . . . . .B11 VR910-DT, VR914-DT Vandual Resistant Trim . . . . . . . . . . . . . . . . . . . . . .B12 VR910-NL, VR914-NL Vandual Resistant Trim . . . . . . . . . . . . . . . . . . . . .B12 VR910M-DT, VR914M-DT Vandual Resistant trim . . . . . . . . . . . . . . . . . . .B12 VR910M-NL, VR914M-NL Vandual Resistant Trim . . . . . . . . . . . . . . . . . .B12 B1 Push Bars 9100 Pushbar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B8 9103EZ Pushber & Pull . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B9 9190 Pushbar & Pull . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B9 Pulls & Plates Push and Pull Plates 8200 Push Plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B6 8300 Pull Plate (less pull) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B6 8302 Pull Plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B7 8303 Pull Plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B7 8305 Pull Plate (with 8105) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B7 8311 Pull Plate (with 8111-5) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B8 A Pulls, Plates and Trim Pulls page 8102 Door Pull . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B2 8103 Door Pull . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B2 8103EZ Door Pull . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B3 8105 Door Pull . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B3 8111-5 Door Pull . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B4 8112-5 Door Pull . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B4 8121 Door Pull . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B5 8190 Offset Door Pull . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B5 Hinges & Pivots Table Of Contents B1 USA 1.877.671.7011 Canada 1.905.403.1800 www.ives.ingersollrand.com A Hinges & Pivots Architectural Door Trim 8102 Door Pull - 3/4" Round Available mounting – standard, F, H-I-L, orJ see pages B15 and B16 Available Sizes 6", 8", 10" Pulls & Plates Flush Bolts & Coordinators C D Projection “A” Clearance Center to Center “B” Overall Length “C” 2-1/4" 2-1/4" 2-1/4" 1-1/2" 1-1/2" 1-1/2" 6" 8" 10" 6-3/4" 8-3/4" 10-3/4" 8102-6 8102-8 8102-0 3/4” ROUND Finishes brass US Number US3 US4 US10 US10B US15 US26 US26D* BHMA 606 612 613 619 625 626 605 Finishes stainless steel US Number US32D* BHMA 630 Finishes aluminum US Number US28 BHMA Latches, Catches & Bolts B2 Product No. 628 * Available with Antimicrobial Coating, use suffix AM 8103 Door Pull - 1" Round Available mounting – standard, F, H-I-L, or J see pages B15 and B16 Available Sizes E Stops 8", 10", 12" Product No. Projection “A” Clearance Center to Center “B” Overall Length “C” 2-1/2" 2-1/2" 2-1/2" 1-1/2" 1-1/2" 1-1/2" 8" 10" 12" 9" 11" 13" F Exterior Hardware 8103-8 8103-0 8103-2 G Miscellaneous Hardware 1” ROUND Finishes brass US Number US3 US4 US10 US10B US15 US26 US26D* BHMA 606 612 613 619 625 626 605 Finishes stainless steel US Number US32 US32D* BHMA 629 630 Finishes aluminum US Number US28 BHMA 628 * Available with Antimicrobial Coating, use suffix AM B2 USA 1.877.671.7011 Canada 1.905.403.1800 www.ives.ingersollrand.com Architectural Door Trim Pulls & Plates B3 Flush Bolts & Coordinators C Latches, Catches & Bolts D Stops E Exterior Hardware F Miscellaneous Hardware G Available Sizes A Available mounting – standard, M, O, H-I-L, J see pages B15 and B17 Hinges & Pivots 8103EZ Door Pull - 1” Round Large 2-1/2" Clearance for the Accessibility Applications 8", 10", 12" Product No. Projection “A” Clearance Center to Center “B” Overall Length “C” 3-1/2" 3-1/2" 3-1/2" 2-1/2" 2-1/2" 2-1/2" 8" 10" 12" 9" 11" 13" 8103EZ 8103EZ 8103EZ 1” ROUND 2-1/2” CLEARANCE Finishes brass US Number US3 US4 US10 US10B US15 US26 US26D* BHMA 606 612 613 619 625 626 605 Finishes stainless steel US Number US32 US32D* BHMA 629 630 Finishes aluminum US Number US28 BHMA 628 * Available with Antimicrobial Coating, use suffix AM 8105 Door Pull - 1” Flattened Available mounting – standard or F see page B15 Available Sizes 6", 8", 10" Product No. Projection “A” Center to Center “B” Overall Length “C” 2" 2" 2" 6" 8" 10" 6-1/2" 8-1/2" 10-1/2" 8105-6 8105-8 8105-0 1” FLATTED 1/2 ROUND Finishes brass US Number US3 US4 US10 US10B US15 US26 US26D* BHMA 606 612 613 619 625 626 605 Finishes stainless steel US Number US32D* BHMA 630 Finishes aluminum US Number US28 BHMA 628 * Available with Antimicrobial Coating, use suffix AM B3 USA 1.877.671.7011 Canada 1.905.403.1800 www.ives.ingersollrand.com A B4 8111-5 Door Pull Available mounting – standard see page B15 Size 5-1/4" Pulls & Plates Flush Bolts & Coordinators C Hinges & Pivots Architectural Door Trim Product No. Projection “A” Center to Center “B” Overall Length “C” 8111-5 1-13/16" 5-1/4" 6-1/4" Finishes brass US Number US3 US4 US10 US10B US15 US26 US26D* BHMA 606 612 613 619 625 626 605 Finishes stainless steel US Number US32D* 1” ROUND BASE BHMA 630 Finishes aluminum US Number US28 BHMA 628 D 8112-5 Door Pull Standard sheet metal screws for surface mounting Size 5-1/4" Stops E Latches, Catches & Bolts * Available with Antimicrobial Coating, use suffix AM Product No. Projection “A” Center to Center “B” Overall Length “C” 8112-5 2-13/16" 5-5/8" 7-1/2" Finishes brass US Number US26D* BHMA 626 F Exterior Hardware G Miscellaneous Hardware * Available with Antimicrobial Coating, use suffix AM 1-7/8” SURFACE MOUNTED B4 USA 1.877.671.7011 Canada 1.905.403.1800 www.ives.ingersollrand.com Architectural Door Miscellaneous Hardware G 626 F BHMA Exterior Hardware Finishes brass US Number US26D* E 8-3/4" Stops 5-3/4" D 3-1/2" 8121-5 Latches, Catches & Bolts Overall Length “C” C Center to Center “B” Flush Bolts & Coordinators Projection “A” B5 Product No. Pulls & Plates 5-3/4" A Available mounting – K see page B16 Size Hinges & Pivots 8121 Door Pull * Available with Antimicrobial Coating, use suffix AM B C 1-1/2” HOSPITAL A 8190 90° Offset Door Pull Available mounting – standard H-I-L,M, N or O see page B15 and B17 Available Sizes 8", 10", 12", 18" Product No. 8190-8 8190-0 8190-2 8190-18 1” ROUND Projection “A” Clearance Center to Center “B” Overall Length “C” 3-1/4" 3-1/4" 3-1/4" 3-1/4" 2-1/4" 2-1/4" 2-1/4" 2-1/4" 8" 10" 12" 18" 9" 11" 13" 19" Finishes brass US Number US3 US4 US10 US10B US15 US26 US26D* BHMA 606 612 613 619 625 626 605 Finishes stainless steel US Number US32 US32D* BHMA 629 630 * Available with Antimicrobial Coating, use suffix AM B5 USA 1.877.671.7011 Canada 1.905.403.1800 www.ives.ingersollrand.com A Hinges & Pivots Architectural Door Trim 8200 8300 Push Plate Pull Plate, Prep for Pull (less pull) B6 Pulls & Plates Available Sizes 3" x 12" 3.5" x 15" 4" x 16" 6" x 16" 8" x 16" C D Latches, Catches & Bolts Flush Bolts & Coordinators Special sizes are available. Consult factory. Plates Cut for Cylinder or Thumbturns 2” 2” CFC E Standard cutout is 1-1/4” for cylinder and 3/8” for thumbturn. CFT 2” Specify CFC for cutout for cylinder or CFT for cutout for thumbturn. 2” 2” 2” CFC Stops Plates are available with cutout for cylinder or thumbturn; standard cutout is 2” from top and centered on plates up to 4” wide. For plates wider than 4” cutout is located 2” from outer edge, specify LH or RH. When pull location interferes with standard cutout location a detail drawing should be furnished with the order. CFT Finishes brass US Number US3 US4 US10 US10B US15 US26 US26D* BHMA 606 612 613 619 625 626 Finishes stainless steel US Number US32D* F 630 Finishes aluminum US Number US28 BHMA 628 * Available with Antimicrobial Coating, use suffix AM Miscellaneous Hardware Exterior Hardware BHMA G 605 B6 USA 1.877.671.7011 Canada 1.905.403.1800 www.ives.ingersollrand.com Architectural Door Trim 8302 F Miscellaneous Hardware G US26 US26D* 625 Finishes stainless steel US Number US32D* Finishes aluminum US Number US28 BHMA BHMA 630 Exterior Hardware 613 E 612 Stops 606 605 D BHMA Latches, Catches & Bolts US10B C US10 Flush Bolts & Coordinators US4 B7 Finishes brass US Number US3 Pulls & Plates 3/4” ROUND 8102 Pull 6" centers 8" centers 10" centers A 8300 Plate 3-1/2" x 15" 4" x 16" 6" x 16" Hinges & Pivots Pull plate Available mounting – Standard, F, G, H-I-L, or J see pages B15 and B16 626 628 * Available with Antimicrobial Coating, use suffix AM 8303 Pull plate Available mounting – Standard, F, G, H-I-L, or J see pages B15 and B16 8300 Plate 3-1/2" x 15" 4" x 16" 6" x 16" 1” ROUND 8103 Pull 8" centers 10" centers 7" centers Finishes brass US Number US3 US4 US10 US10B BHMA 606 612 613 605 US26 US26D* 625 Finishes stainless steel US Number US32D* Finishes aluminum US Number US28 BHMA BHMA 630 626 628 * Available with Antimicrobial Coating, use suffix AM 8305 Pull plate Available mounting – Standard or F see page B15 8300 Plate 3-1/2" x 15" 4" x 16" 6" x 16" 1” FLATTED 1/2 ROUND 8105 Pull 6" centers 8" centers 10" centers Finishes brass US Number US3 US4 US10 US10B US26 US26D BHMA 606 612 613 625 626 605 Finishes stainless steel US Number US32D Finishes aluminum US Number US28 BHMA BHMA 630 * Available with Antimicrobial Coating, use suffix AM 628 B7 USA 1.877.671.7011 Canada 1.905.403.1800 www.ives.ingersollrand.com B8 8311 Hinges & Pivots Pulls & Plates A Architectural Door Trim 8300 Plate 3-1/2" x 15" 4" x 16" 6" x 16" 1” ROUND BASE US4 US10 US10B BHMA 606 612 613 C Flush Bolts & Coordinators BHMA 626 630 628 * Available with Antimicrobial Coating, use suffix AM 9100 Series Door Push Bars and Pulls • Available in brass, stainless steel or aluminum. • Standard fasteners furnished for 1-3/4” thick doors. Specify door thick if other than standard. • Special lengths are available, contact customer service. See page B17 for special mounting requirements. Latches, Catches & Bolts D 625 Finishes aluminum US Number US28 Caution – the length of the pushbar should not interfere with the door jamb or cause a pinch point. 9100 Push Bar Stops E F Exterior Hardware 605 US26 US26D* Finishes stainless steel US Number US32D* Available mounting – NO or NS see page B17 Product No. G 8111-5 Pull 5-1/8" centers Finishes brass US Number US3 BHMA Miscellaneous Hardware Pull plate Available mounting – Standard or F see page B15 9100-28 9100-33 Projection Clearance Center to Center Overall Length 2-1/2" 2-1/2" 1-1/2" 1-1/2" 28" 33" 29" 34" Special lengths available, consult factory 1” ROUND Finishes brass US Number US3 US4 US10 US10B US15 US26 US26D* BHMA 606 612 613 619 625 626 605 Finishes stainless steel US Number US32 US32D* BHMA 629 630 * Available with Antimicrobial Coating, use suffix AM B8 USA 1.877.671.7011 Canada 1.905.403.1800 www.ives.ingersollrand.com Architectural Door Trim US10B US15 US26 US26D* BHMA 606 612 613 619 625 626 605 Finishes stainless steel US Number US32 US32D* BHMA 629 630 * Available with Antimicrobial Coating, use suffix AM G US10 Miscellaneous Hardware US4 F 1” ROUND Finishes brass US Number US3 Exterior Hardware Special lengths available, consult factory E 2-1/2" & 3-1/2" 2-1/2" & 3-1/2" 2-1/2" & 3-1/2" Stops 8" 10" 12" D 28", 33" 28", 33" 28", 33" Latches, Catches & Bolts 9103EZ 9103EZ 9103EZ C Projection Push & Pull Flush Bolts & Coordinators CTC Pull B9 CTC Push Pulls & Plates Product No. A Available mounting – NO or NS see page B17 Hinges & Pivots 9103EZ Straight Pull/Pushbar Combo (8103EZ Pull + 9100 Push) 9190 Offset Pull/Pushbar Combo (8190 pull + 9100 push) Available mounting – NO or NS see page B17 1” ROUND Product No. CTC Push CTC Pull Projection Push & Pull 9190 9190 9190 9190 28", 33" 28", 33" 28", 33" 28", 33" 8" 10" 12" 18" 2-1/2" & 3-1/4" 2-1/2" & 3-1/4" 2-1/2" & 3-1/4" 2-1/2" & 3-1/4" Special lengths available, consult factory Finishes brass US Number US3 US4 US10 US10B US15 US26 US26D* BHMA 606 612 613 619 625 626 605 Finishes stainless steel US Number US32 US32D* BHMA 629 630 * Available with Antimicrobial Coating, use suffix AM B9 USA 1.877.671.7011 Canada 1.905.403.1800 www.ives.ingersollrand.com A Hinges & Pivots B10 Pulls & Plates C D E All stainless steel, 11 gauge (0.120” thick), using stainless steel fasteners for door thickness of 1-3/4” to 2-1/4”. Built-in lock protector prevents tampering on certain models. Protective cylinder collar spins to reduce damage from pipe wrench or other tools. Models are available with or without attractive black plastisol edge grip. VR810-DT VR814-DT With black grip Without black grip • • • • VR814 VR810 For use with Monarch XX, 18 Series or 25 Series rim exit device Non-handed Thru-bolts direct to the exit device Pull operation only Prod. No. Width Height Thru-Bolt Pattern Clearance Grip to Door Projection VR810DT 5-1/4" 11" 1-3/4" Wide x 7-3/4" High 1-1/2" 1-7/8" Finishes US Finish US32D BHMA 630 VR810-NL VR810-NL VR814-NL VR814-NL LHR With black grip RHR With black grip LHR Without black grip RHR Without black grip • For use with Monarch XX-V, 18-V Series or 25-V Series vertical rod exit device • Thru-bolts direct to the exit device • Night latch operation (cylinder not furnished) Stops Exterior Hardware F Vandal Resistant Trim Prod. No. Width Height Thru-Bolt Pattern VR810NL 5-1/4" 11" 1-3/4" Wide x 7-3/4" High 1-1/2" Finishes US Finish BHMA Clearance Grip to Door Projection 1-7/8" US32D 630 Miscellaneous Hardware G Latches, Catches & Bolts Flush Bolts & Coordinators Vandal Resistant Trim B10 USA 1.877.671.7011 Canada 1.905.403.1800 www.ives.ingersollrand.com Vandal Resistant Trim VR900LLP VR900LLP VR904LLP VR904LLP RH LH RH LH G 630 Miscellaneous Hardware Projection 1-7/8" US32D BHMA F 2" Wide x 10" High 1-1/2" Exterior Hardware 11" E 7-1/4" Finishes US Finish Clearance Grip to Door Stops Thru-Bolt Pattern D Height Latches, Catches & Bolts Width C • Handed design allows trim to be positioned to coordinate with the centerline of inside hardware. Flush Bolts & Coordinators • Includes built-in lock protector and cylinder cutout. B11 • For use with most mortise locks on outswinging doors including • Schlage L9000 Series with interior L or N escutcheon, and rose trim. Pulls & Plates With black grip With black grip Without black grip Without black grip A RHR LHR RHR LHR Hinges & Pivots VR900 VR900 VR904 VR904 With black grip With black grip Without black grip Without black grip • For use with most mortise locks on outswinging doors including • Schlage L9000 Series with interior L or N escutcheon, and rose trim. • Includes built-in lock protector and cylinder cutout. • Handed design allows trim to be positioned to coordinate with the centerline of inside hardware. Width Height Thru-Bolt Pattern Clearance Grip to Door Projection 5-1/4" 11" 1-3/4" Wide x 10" High 1-1/2" 1-7/8" Finishes US Finish BHMA US32D 630 B11 USA 1.877.671.7011 Canada 1.905.403.1800 www.ives.ingersollrand.com Vandal Resistant Trim A B12 Pulls & Plates Flush Bolts & Coordinators C D Latches, Catches & Bolts Stops E Hinges & Pivots VR910-DT VR914-DT • • • • Height Thru-Bolt Pattern 5-1/4" 11" 1-3/8" Wide x 7" High 1-1/2" Finishes US Finish F Exterior Hardware Clearance Grip to Door Projection 1-7/8" US32D BHMA 630 VR910-NL VR914-NL With black grip Without black grip • For use with Von Duprin 98/99 rim and vertical rod exit device • Non-handed • Thru-bolts direct to the exit device Width Height Thru-Bolt Pattern 5-1/4" 11" 1-3/8" Wide x 7" High 1-1/2" Finishes US Finish Clearance Grip to Door Projection 1-7/8" US32D BHMA 630 VR910M-DT With black grip VR914M-DT Without black grip • For use with Von Duprin 9875/9975 mortise lock exit device • Non-handed • Thru-bolts direct to the exit device Width Height Thru-Bolt Pattern Clearance Grip to Door Projection 7-1/4" 11" 1-3/8" Wide x 7" High 1-1/2" 1-7/8" US32D BHMA G For use with Von Duprin 98/99 Series rim and vertical rod exit device Non-handed Thru-bolts direct to the exit device Pull operation only. Width Finishes US Finish Miscellaneous Hardware With black grip Without black grip 630 VR910M-NL VR910M-NL VR914M-NL VR914M-NL RHR LHR RHR LHR With black grip With black grip Without black grip Without black grip • For use with Von Duprin 9875/9975 Series mortise lock exit device • Thru-bolts direct to the exit device • Night latch operation (cylinder not furnished) Width Height Thru-Bolt Pattern Clearance Grip to Door Projection 7-1/4" 11" 1-3/8" Wide x 7" High 1-1/2" 1-7/8" Finishes US Finish BHMA US32D 630 B12 USA 1.877.671.7011 Canada 1.905.403.1800 www.ives.ingersollrand.com Protection Trim US26D BHMA 606 612 613 619 625 626 605 Finishes stainless steel US Number US32 US32D BHMA 629 630 Finishes aluminum US Number US28 BHMA 628 Finishes plastic Clear and Black Residential Grade Kickplates available Carded only, finishes PA28, PA3, PA619, PA716, B3, B505, B619, B716 G US26 Miscellaneous Hardware US15 F US10B Exterior Hardware US10 E US4 Stops Finishes brass US Number US3 D 42"-48" 1 1 2 2 2 2 Latches, Catches & Bolts 34"-41" 1 1 1 2 2 2 C 26"-33" 1 1 1 1 2 2 Flush Bolts & Coordinators 4"-8" 9"-16" 17"-24" 25"-32" 33"-40" 41"-48" 22"-25" 1 1 1 1 1 2 B13 *UL mark appears in upper right corner. Number of screw packs required by plate size (specify TEK Screws or TORK screws). Pulls & Plates 8400 Protection Plate 8402 (UL)* Protection Plate A • Door protection plates are available in .050” thick brass, stainless steel or aluminum; and 1/8” thick high impact polyethylene in clear or black. • Bevel edge options; specify B4E for all four edges. • Mounting screw pack furnished standard, 16 screws per pack. Optional screw packs are available for TEK or TORK screw heads. Refer to the following chart for ordering. • Specify NMH for no mounting holes. • Specify NMH-A for no mounting holes with adhesive. • Specify CS for counter sunk mounting holes. • Specify ERS prepped with extra row of screws. Kickplate Gasket Tape Tape is recommended when using a brass plate on a metal door to reduce tarnishing from electrolytic oxidation. One tape pack will cover an the perimeters of a 8” x 34” kickplate. Order 8401 Gasket Tape. Hinges & Pivots 8400 Series Protection Plates B13 USA 1.877.671.7011 Canada 1.905.403.1800 www.ives.ingersollrand.com A B14 Pulls & Plates C D E Stops F Exterior Hardware G Miscellaneous Hardware Latches, Catches & Bolts Flush Bolts & Coordinators Hinges & Pivots Protection Trim Mop Plates • Protect the bottom of the pull side of door subject to cleaning and mopping procedures. • Size Ranges:4" to 6" high, 22" to 48" wide Kick Plates • Protect the bottom of the push side of doors subject to scuffing from foot traffic. • Recommended for all doors subject to normal use (especially doors using a closer). • Size Ranges: 8" to 24" high, 22" to 48" wide Stretcher Plates • Protect doors at specific areas where consistent contact is made by stretchers, service carts or other equipment. • Usually applied to push side of doors. • Specify “B4E” Option for beveled edges. • Size Ranges: 6" to 8" high, 22" to 48" wide Armor Plates • Protect lower half of doors from abuse by hard carts, trucks and rough usage. • Usually applied to push side of single doors and both sides of double acting doors. • Size Ranges: 26" to 48" high, 22" to 48" wide B14 USA 1.877.671.7011 Canada 1.905.403.1800 www.ives.ingersollrand.com Push Plates G Available only for 8102, 8103, 8105, 8111, 8302, 8303, 8305 and 8311. Plate on opposite side of door must be ordered separately. • (2) Steel screw sleeves; zinc plated. • (2) 1/4-20 x 1-1/4" steel countersunk trim head machine screw; zinc plated for reinforced metal door. • (2) 1/4 x 1-1/2" steel countersunk trim head steel metal screw; zinc plated for wood doors. Miscellaneous Hardware • (2) 1/4-20 x 2-1/4" steel flat head machine screws; zinc plated. Available only for 8102 8103, 8103EZ or wood door Pulls and 8302, 8303 pull plates. F Wood Doors Concealed Pull Mounting With Push Plate Reinforced Hollow Metal Door Concealed Pull Mounting Exterior Hardware Type H-I-L Mount Type F Mount E Plate is attached to door by 6 screws. Stops Pull mounts directly onto plate. D • (2) 1/4-20 x 5/8" steel flat head machine screws; zinc plated. Latches, Catches & Bolts Available only for 8302, 8303, 8311 Pull Plates. C Concealed Pull Plate Mounting • (2) 1/4-20 x 2-1/4" brass, oval head machine screws; plated to match. • (2) No. 14 countersunk washers; plated to match Flush Bolts & Coordinators Standard Mounting B15 Type G Mount Pulls & Plates Standard Mount A • All mounting hardware is for standard 1-3/4" door. • Consult Customer Service if other than standard. Hinges & Pivots Mounting B15 USA 1.877.671.7011 Canada 1.905.403.1800 www.ives.ingersollrand.com A Hinges & Pivots Architectural Door Trim Mounting • All mounting hardware is for standard 1-3/4" door. • Consult Customer Service if other than standard. B16 Pulls & Plates C D E Stops F Exterior Hardware G Miscellaneous Hardware Latches, Catches & Bolts Flush Bolts & Coordinators Type J Mount Type K Mount Back to Back Pull Mounting Back to Back Pull Mounting Available only for 8102, 8103, Pulls and 8302, 8303 Pull plates. Available only for 8121-5 Pulls. • (2) Steel screw sleeves; zinc plated. • (2) 1/4-20 x 2-3/4" steel countersunk trim head machine screws; zinc plated. Pulls furnished in pairs (PR) unless single (SGL) specified. • (4) Steel screw sleeve nuts; steel zinc plated. • (8) No. 8-32 x 1" brass oval head machine screws; plated to match. Pulls furnished in pairs (PR). B16 USA 1.877.671.7011 Canada 1.905.403.1800 www.ives.ingersollrand.com Architectural Door Trim Pulls & Plates B17 Flush Bolts & Coordinators C Latches, Catches & Bolts D Stops E Exterior Hardware F Miscellaneous Hardware G Type M Mount A • All mounting hardware is for standard 1-3/4" door. • Consult Customer Service if other than standard. Hinges & Pivots Mounting for 8103EZ, 8190, 9100, 9103EZ and 9190 Type O Mount RH (M1) and LH (M2) Thread Back-to-Back with Spanner Collar Decorative Blind Thru - Bolt Pulls furnished in pairs (PR) or Single (SGL) must specify M1 or RH thread or M2 for LH thread. Type NO Push/Pull Mounting Type N & Type O Type N Mount Pushbar to Pull - (1) 1/4-20 X 3"steel countersunk trim head machine screws with (2) set screws. - (1) steel screw sleeve, zinc plated. Free End Pushbar & Pull - (2) 1/4-20 X 2-1/4" blind thru-bolts; plated to match. (push) (pull) Back-to-Back “Two-Anchor” Type NS-Standard Push/Pull Mounting Type N & Standard Pushbar to Pull - (1) 1/4-20 X 3"steel countersunk trim head machine screws with (2) set screws. - (1) steel screw sleeve, zinc plated. Free End Pushbar & Pull - (2) 1/4-20 X 2-1/4" brass, oval head mach screws; plated to match. - (2) No. 14 countersunk washers; plated to match. B17 USA 1.877.671.7011 Canada 1.905.403.1800 www.ives.ingersollrand.com E Stops F Exterior Hardware G Miscellaneous Hardware D Latches, Catches & Bolts C Flush Bolts & Coordinators B18 Pulls & Plates A Hinges & Pivots Notes B18 USA 1.877.671.7011 Canada 1.905.403.1800 www.ives.ingersollrand.com Flush Bolts and Coordinators Pulls & Plates B Flush Bolts & Coordinators C1 Latches, Catches & Bolts D Stops E Exterior Hardware F Miscellaneous Hardware G Coordinators COR Series Bar Coordinator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C12 FL Series Filler bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C12 MB1, MB2 Mounting Brackets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C13 MB1F, MB2F, MB3F Mounting Brackets . . . . . . . . . . . . . . . . . . . . . . . .C13 MB1V, MB2V, MB3V Mounting Brackets . . . . . . . . . . . . . . . . . . . . . . . .C13 COR7G, CORG Gravity Coordinator . . . . . . . . . . . . . . . . . . . . . . . . . . . .C14 CB1 Carry Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C14 How to order . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C15 Special factory prep . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C16 A Flush Bolts page FB31, FB32, FB33 Automatic Flush Bolt . . . . . . . . . . . . . . . . . . . . . . . . .C2 FB41, FB42 Automatic Flush Bolt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C3 FB51, FB52, FB53 Automatic Flush Bolt . . . . . . . . . . . . . . . . . . . . . . . . .C4 FB61, FB62 Constant Latching Flush Bolt . . . . . . . . . . . . . . . . . . . . . . . .C5 261 Manual Flush Bolt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C6 262 Manual Flush Bolt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C6 265 Manual Flush Bolt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C7 FB358 Manual Flush Bolt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C8 FB457 Manual Flush Bolt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C9 FB458 Manual Flush Bolt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C10 DP1, DP2 Dust Proof Strike . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C11 Hinges & Pivots Table Of Contents C1 USA 1.877.671.7011 Canada 1.905.403.1800 www.ives.ingersollrand.com A Hinges & Pivots B Pulls & Plates Automatic Flush Bolts – Metal Doors FB31P Top and Bottom Bolts (Pair) • Fully Automatic—inactive door is latched, bolts are extended when active door closes, door is unlatched, bolts retract when active door is opened. • Low Actuation Forces—Top Bolt Has No Spring Tension. • Fits standard ANSI A115.4 Door Frame Preparations. • Non-handed. • Bolt throw is 3/4" with a 7/8" vertical adjustment. • Bolt backset is 3/4" • Standard Rod Length is 12", which is measured from the center of the flush bolt body to the bolt tip. Optional rod lengths available for top bolt only on non-fire rated openings—18", 24", 36" and 48. C2 FB31T Top Bolt Only FB31B Bottom Bolt Only Meets ANSI A156.3 Type 25. UL Listed 3 Hour Fire Doors 8'0" x 10'0" FB32 Top Bolt with Auxiliary Fire Latch • Latches, Catches & Bolts D E Bottom Bolt FB33 Top Bolt Auxiliary Fire Latch Meets ANSI A156.3 Type 25. UL Listed 3 Hour Fire Doors 8'0" x 10'0" FB32 Model with Auxiliary Fire Latch eliminates the bottom bolt and is UL Listed for Fire Doors. Top Bolt with Auxiliary Fire Latch and Retrofit Plate • Stops Exterior Hardware F Top Bolt FB33 Model with Auxillary Fire Latch eliminates the bottom bolt and includes a retrofit plate to cover existing bottom bolt prep. UL Listed for Fire Doors. Dimensions Body Size: 1" Wide x 6-3/4" Long x 2" Deep Guide Size: 1" Wide x 1-27/32" Long x 27/32" High x 3/32" Thick Strike Size: 15/16" Wide x 2-1/4" Long x 1/16" Thick Rub Plate Size: 1-1/4" Wide x 1-11/16" Long x 3/64" Thick Auxiliary Fire Latch Size: 1" Wide x 1-3/4" Long x 3-1/4" Deep Retrofit Plate Size: 1" Wide x 6-3/4" Long x 3/32" Thick Finishes Ives Number US3 US4 US10 US10B US32 US32D BHMA 605 606 612 613 629 630 Miscellaneous Hardware G Flush Bolts & Coordinators DP1 or DP2 optional dust proof strike available, see page C11. C2 USA 1.877.671.7011 Canada 1.905.403.1800 www.ives.ingersollrand.com Automatic Flush Bolts – Wood Doors Rub Plate Size: 1-1/4" Wide x 1-11/16" Long x 3/64" Thick Top Bolt Auxiliary Fire Latch Meets ANSI A156.3 Type 25. UL Listed 20 Minute Fire Doors 8'0" x 8'0" G Strike Size: 15/16" Wide x 2-1/4" Long x 1/16" Thick Miscellaneous Hardware Guide Size: 1" Wide x 6" Long x 1/8" Thick F Body Size: 1" Wide x 8-1/2" Long x 2" Deep Exterior Hardware Dimensions E FB42 Model with Auxiliary Fire Latch eliminates the bottom bolt and is UL Listed for Fire Doors. Stops • D Top Bolt with Auxiliary Fire Latch Latches, Catches & Bolts FB42 C3 FB41T Top Bolt Only FB41B Bottom Bolt Only Flush Bolts & Coordinators Meets ANSI A156.3 Type 25. UL Listed 90 Minute Fire Doors 8'0" x 8'0" B Bottom Bolt Pulls & Plates DP1 or DP2 optional dust proof strike available, see page C11. Top Bolt A • Fully Automatic—inactive door is latched, bolts are extended when active door closes, door is unlatched bolts retract when active door is opened. • Low Actuation Forces—Top Bolt Has No Spring Tension. • Non-handed. • Bolt throw is 3/4" with a 7/8" vertical adjustment. • Bolt backset is 3/4" Hinges & Pivots FB41P Top and Bottom Bolts (Pair) Auxiliary Fire Latch Size: 1" Wide x 1-3/4" Long x 3-1/4" Deep Finishes Ives Number US3 US4 US10 US10B US32 US32D BHMA 605 606 612 613 629 630 C3 USA 1.877.671.7011 Canada 1.905.403.1800 www.ives.ingersollrand.com A Hinges & Pivots B C4 • Constant Latching—inactive door remains latched until the active door is opened, releasing the automatic bottom bolt and then the top bolt can be manually released. Inactive door will relatch automatically when closed. • Low Actuation Forces. • Fits standard ANSI A115.4 Door and Frame Preparations. • Non-handed. • 3/4" bolt throw with a 7/8" vertical adjustment. • 3/4" backset • Standard Rod Length is 12", which is measured from the center of the flush bolt body to the bolt tip. Optional rod lengths available for top bolt only on non-fire rated openings—18", 24", 36" and 48". Top Bolt DP1 or DP2 optional dust proof strike available, see page C11. Bottom Bolt FB51T Top Bolt Only Meets ANSI A156.3 Type 27. UL Listed 3 Hour Fire Doors 8'0" x 10'0" FB52 Latches, Catches & Bolts D FB51P Top and Bottom Bolts (Pair) Top Bolt with Auxiliary Fire Latch • FB52 Model with Auxiliary Fire Latch eliminates the bottom bolt and is UL Listed for Fire Doors. FB53 Top Bolt with Auxiliary Fire Latch & Retrofit Plate • FB53 Model with Auxiliary Fire Latch eliminates the bottom bolt and includes a retrofit plate to cover existing bottom bolt prep. UL Listed for Fire Doors. Stops E Flush Bolts & Coordinators Pulls & Plates Constant Latching Flush Bolts – Metal Doors Dimensions Body Size: 1" Wide x 6-3/4" Long x 2" Deep Guide Size: 1" Wide x 1-27/32" Long x 11/16" High x 3/32" Thick F G Miscellaneous Hardware Exterior Hardware Strike Size: 15/16" Wide x 2-1/4" Long x 1/16" Thick Top Bolt Auxiliary Fire Latch Rub Plate Size: 1-1/4" Wide x 1-11/16" Long x 3/64" Thick Auxiliary Fire Latch Size: 1" Wide x 1-3⁄4" Long x 3-1/4" Deep Retrofit Plate Size: 1" Wide x 6-3/4" Long x 3/32" Thick Meets ANSI A156.3 Type 27. UL Listed 3 Hour Fire Doors 8'0" x 10'0" Finishes Ives Number US3 US4 US10 US10B US32 US32D BHMA 605 606 612 613 629 630 C4 USA 1.877.671.7011 Canada 1.905.403.1800 www.ives.ingersollrand.com Constant Latching Flush Bolts – Wood Doors B Flush Bolts & Coordinators C5 Latches, Catches & Bolts D Stops E Exterior Hardware F Miscellaneous Hardware G Bottom Bolt Pulls & Plates Top Bolt A • Constant Latching—inactive door remains latched until the active door is opened, releasing the automatic bottom bolt and then the top bolt can be manually released. Inactive door will relatch automatically when door closes. • Low Actuation Forces. • Non-handed. • Bolt throw is 3/4" with a 7/8" vertical adjustment. • Bolt backset is 3/4" DP1 or DP2 optional dust proof strike available, see page C11. Hinges & Pivots FB61P Top and Bottom Bolts (Pair) FB61T Top Bolt Only Meets ANSI A156.3 Type 27. UL Listed 90 Minute Fire Doors 8'0" x 8'0" FB62 Top Bolt with Auxiliary Fire Latch • FB62 Model with Auxiliary Fire Latch eliminates the bottom bolt and is UL Listed for Fire Doors.. Dimensions Body Size: 1" Wide x 8-1/2" Long x 2" Deep Guide Size: 1" Wide x 6" Long x 1/8" Thick Strike Size: 15/16" Wide x 2-1/4" Long x 1/16" Thick Rub Plate Size: 1-1/4" Wide x 1-11/16" Long x 3/64" Thick Auxiliary Fire Latch Size: 1" Wide x 1-3/4" Long x 3-1/4" Deep Top Bolt Auxiliary Fire Latch Meets ANSI A156.3 Type 27. UL Listed 20 Minute Fire Doors 8'0" x 8'0" Finishes Ives Number US3 US4 US10 US10B US32 US32D BHMA 605 606 612 613 629 630 C5 USA 1.877.671.7011 Canada 1.905.403.1800 www.ives.ingersollrand.com A Hinges & Pivots B C6 D 261 Flush Bolt • An exceptionally smooth working flush bolt with sharp, crisp lines. • Double action spring design provides automatic holding of brass bolt in projected or retracted position, and assures ease of operation in conjunction with deep cup finger hole. • Made from polished cast brass. • Bolt tip is 5/16" Diameter • Bolt throw is 3/4" • Bolt backset is 15/32" Dimensions Body Size: 3/4" Wide x 4" Long x 1-1/8" Deep Strike Size: 5/8" Wide x 1-1/2" Long Meets ANSI/BHMA A156.16, L04201. Finishes Ives Number B3 B5 B10B B15 B26 B26D BHMA 605 609 613 619 625 626 262 Flush Bolt • An exceptionally smooth working flush bolt with sharp, crisp lines. • Double action spring design provides automatic holding of brass bolt in projected or retracted position, and assures ease of operation in conjunction with deep cup finger hole. • Made from polished cast brass. • Bolt tip is 1/2" Diameter • Bolt throw is 1" • Bolt backset is 15/32" Latches, Catches & Bolts Flush Bolts & Coordinators Pulls & Plates Manual Flush Bolts E Stops Dimensions Body Size: 3/4" W x 6" L x 1-11/32" D Strike Size: 7/8" W x 1-3/4" L F Exterior Hardware G Miscellaneous Hardware Meets ANSI/BHMA A156.16, L04201. Finishes Ives Number B3 B5 B10B B15 B26 B26D BHMA 605 609 613 619 625 626 C6 USA 1.877.671.7011 Canada 1.905.403.1800 www.ives.ingersollrand.com Manual Flush Bolts 609 613 619 625 626 G 605 Miscellaneous Hardware BHMA F B26D Exterior Hardware B26 E B15 Stops B10B D B5 Latches, Catches & Bolts B3 C7 Finishes Ives Number Flush Bolts & Coordinators Meets ANSI/BHMA A156.16, L04201. B Dimensions Body Size: 3/4" W x 6" L x 1-7/16" D Strike Size: 7/8" W x 1-3/4" L Pulls & Plates • A flush bolt with radiused bottom faceplate designed specifically for simple one-step router installation. • Double action spring design provides automatic holding of brass bolt in projected or retracted position, and assures ease of operation in conjunction with deep cup finger hole. • Faceplate is polished solid brass; bolt is made from aluminum zinc alloy. • Bolt tip is 1/2" Diameter • Bolt throw is 1" • Bolt backset is 1/2" A Flush Bolt Hinges & Pivots 265 C7 USA 1.877.671.7011 Canada 1.905.403.1800 www.ives.ingersollrand.com A B Pulls & Plates C8 D E Stops F Exterior Hardware G Miscellaneous Hardware Latches, Catches & Bolts Flush Bolts & Coordinators Hinges & Pivots Manual Flush Bolts – Wood Doors FB358 Top or Bottom Bolts Meets ANSI/BHMA A156.16, L04261. UL Listed 90 Minute Fire Doors 8'0" x 10'0" • When the active door is opened, the lever can be moved to the ‘up’ position, retracting the bolt and allowing the inactive leaf to be opened. When the inactive leaf is closed, the lever can be moved to the ‘down’ position, projecting the bolt into the strike and securely locking the inactive leaf. • Reduces installation costs; requires only simple router mortise at top and bottom corners of doors. • Door strength and rigidity maintained by tying door faces to reinforcing extensions on guide with machine screws and bearing washers, not supplied. • Non-handed. • Bolt tip 1/2" diameter • Bolt throw is 3/4" with a 7/8" vertical adjustment. • Bolt backset is 3/4" • Not available for rabbeted door installations. DP1 or DP2 optional dust proof strike available, see page C11. Dimensions Body Size: 1" Wide x 6-3/4" Long x 1-3/8" Deep Guide Size: 1" Wide x 2-1/2" Long x 5/64" Thick Strike Size: 15/16" Wide x 2-1/4" Long x 5/64" Thick Finishes Ives Number US3 US4 US10 US10B US15 US26 US26D BHMA 605 606 612 613 619 625 626 C8 USA 1.877.671.7011 Canada 1.905.403.1800 www.ives.ingersollrand.com Manual Flush Bolts – Metal Doors US26D BHMA 605 606 612 613 619 625 626 G US26 Miscellaneous Hardware US15 F US10B Exterior Hardware US10 E US4 Stops US3 D Finishes Ives Number Latches, Catches & Bolts Strike Size: 15/16" Wide x 2-1/4" Long x 5/64" Thick C9 Guide Size: 1" Wide x 2" Long x 5/64" Thick Flush Bolts & Coordinators Body Size: 1-1/4" Wide x 6-3/4" Long x 1-1/8" Deep B Dimensions Pulls & Plates DP1 or DP2 optional dust proof strike available, see page C11. A Meets ANSI/BHMA A156.16, L04251. UL Listed 3 Hour Fire Doors 8'0" x 10'0" • When the active door is opened, the lever can be moved to the ‘up’ position, retracting the bolt and allowing the inactive leaf to be opened. When the inactive leaf is closed, the lever can be moved to the ‘down’ position, projecting the bolt into the strike and securely locking the inactive leaf. • Simplified installation in metal frames. Round bolt head requires only a punched hole. Use of strike optional. Special design of guide and flat sided bolt tip to prevent bolt rotation. • Non-handed. • Bolt tip is 1/2" Diameter. • Bolt throw is 3/4" with a 7/8" vertical adjustment. • Bolt backset is 3/4" • Standard Rod Length is 12", which is measured from the center of the flush bolt body to the bolt tip. Optional rod lengths available 6", 9", 18" and 24" for fire rated doors. Optional rod lengths available 6", 9", 18", 24", 30", 36" and 48" for non-fire rated doors. Hinges & Pivots FB457 Top or Bottom Bolts C9 USA 1.877.671.7011 Canada 1.905.403.1800 www.ives.ingersollrand.com A B Pulls & Plates C10 D E Stops F Exterior Hardware G Miscellaneous Hardware Latches, Catches & Bolts Flush Bolts & Coordinators Hinges & Pivots Manual Flush Bolts – Metal Doors FB458 Top or Bottom Bolts • When the active door is opened, the lever can be moved to the ‘up’ position, retracting the bolt and allowing the inactive leaf to be opened. When the inactive leaf is closed, the lever can be moved to the ‘down’ position, projecting the bolt into the strike and securely locking the inactive leaf. • Simplified installation in metal frames. Round bolt head requires only a punched hole. Use of strike optional. Special design of guide and flat sided bolt tip to prevent bolt rotation. • Non-handed. • Bolt tip is 1/2" diameter. • Bolt throw is 3/4" with a 7/8" vertical adjustment. • Bolt backset is 3/4" • Standard Rod Length is 12", which is measured from the center of the flush bolt body to the bolt tip. Optional Rod Lengths available 6", 9", 18" and 24" for fire rated Doors. Optional Rod lengths available - 6", 9", 18", 24", 30", 36" and 48" for non-fire rated doors. DP1 or DP2 optional dust proof strike available, see page C11. Dimensions Meets ANSI/BHMA A156.16, L04251. UL Listed 90 Minute Fire Doors 8'0" x 10'0" Body Size: 1" Wide x 6-3/4" Long x 1-1/8" Deep Guide Size: 1" Wide x 2" Long x 5/64" Thick Strike Size: 15/16" Wide x 2-1/4" Long x 5/64" Thick Finishes Ives Number US3 US4 US5 US10 US10B US15 US26 US26D BHMA 605 606 609 612 613 619 625 626 C10 USA 1.877.671.7011 Canada 1.905.403.1800 www.ives.ingersollrand.com Dust Proof Strikes 606 612 613 625 626 Meets Meets ANSI/BHMA 156.16, L14011. G 605 Miscellaneous Hardware BHMA DP2 F US26D Exterior Hardware US26 E US10B Stops US10 D US4 Latches, Catches & Bolts US3 C11 Finishes Ives Number Flush Bolts & Coordinators Dimensions DP1 Face Plate: 1-7/16" Diameter DP2 Face Plate: 1-5/8" W x 3-1/2" L x 1/8" Thick Body: 1-3/16" Diameter x 1-7/8" Deep B DP1 Pulls & Plates • Designed for use with the bottom bolt of all flush bolts. • Spring-loaded plunger returns to floor or threshold level anytime flush bolt is retracted, eliminating need to clean standard floor strikes. • Strike hole is 3/4" Diameter and 1-1/8" Deep A Dust Proof Strikes Hinges & Pivots DP1 DP2 C11 USA 1.877.671.7011 Canada 1.905.403.1800 www.ives.ingersollrand.com A Hinges & Pivots Coordinators – Bar Coordinators and Filler Bars COR B Pulls & Plates Meets ANSI/BHMA A156.3, Type 21A. UL Listed for installation on labeled frame. C12 Flush Bolts & Coordinators For Openings Where Doors Are Same Size Coordinator Number COR32 COR42 COR52 COR60 COR72 Length of Channel For Opening Widths Common Applications 32" 42" 52" 60" 72" 34" - 52" 52" - 72" 62" - 92" 70" - 108" 84" - 132" Pair of 2'0" Doors Pair of 2'6" Doors Pair of 3'0" Doors Pair of 3'6" Doors Pair of 4'0" Doors D Latches, Catches & Bolts For Openings Where Doors Are Unequal Size The coordinator length should equal the active door width plus approximately 1/2 the inactive door width. The coordinator must be 6" longer than the active door width and shorter than the overall frame opening between stops. E F Exterior Hardware • The COR Series Coordinators are designed for use on pairs of doors when one door needs to close before the other. • All COR units function easily. The active door lever, located nearest to the active stop, holds the active door open until the trigger mechanism is released by the closing of the inactive leaf. • All COR units may not function correctly with swingclear hinges. • All COR units are equipped with an adjustable override feature which allows the active door to close under extreme pressure. • All COR units are compatible with Flush Bolts. • The COR Series is available in five sizes for variable door opening widths. • The COR Series does not cover the entire length of the stop, so a FL filler bar can be provided to maintain architecturally clean lines. • COR Series Coordinator Channels and FL fillers are made of aluminum. • Optional Filler Bars: FL20 - 20", FL32 - 32" and FL44 - 44", available to maintain clean line. • Optional Mounting Brackets available: MB1, MB2, MB1F, MB2F, MB3F, MB1V, MB2V, and MB3V for other stop applied hardware. Finishes Ives Finish US28 BHMA 628 US26D 315AN 713 711 Series Filler Bars • The FL Filler Bars are available in three sizes for variable frame openings. • FL Filler Bars are made of aluminum • FL Filler Bars are field sized to frame opening. Filler Bar Number Length Dimensions FL20 FL32 FL44 20" 32" 44" 1-5/8" W x 5/8" D x 20" L 1-5/8" W x 5/8" D x 32" L 1-5/8" W x 5/8" D x 44" L Finishes Ives Finish US28 BHMA 628 US26D 315AN 713 711 Miscellaneous Hardware G Stops FL Series Bar Coodinators C12 USA 1.877.671.7011 Canada 1.905.403.1800 www.ives.ingersollrand.com Coordinators – Mounting Brackets 600 689 622 Fire Rated Mounting Brackets • Allows for fire-rated stop mounted hardware to be properly installed without damaging the COR Coordinators, such as fire-rated surface vertical rod exit device strikes. • Latch will need to be lowered to compensate for the height of the coordinator and mounting bracket. • MB-V are designed for Von Duprin 8827-F soffit latch. • Mounting brackets are made of steel. Product MB1V MB2V MB3V MB1F MB1V MB2F MB2V MB3F MB3V Jamb Depth Stop Width Dimensions 5" 5" 5-7/8" 5-7/8" 6-7/8" 6-7/8" 1-1/2" - 2-1/4" 1-1/2" - 2-1/4" 2-3/8" - 3-1/4" 2-3/8" - 3-1/4" Over 3-3/8" Over 3-3/8" 4" W x 3" D x 1-5/8" T 4" W x 3" D x 1-5/8" T 4"W x 4" D x 1-5/8"T 4"W x 4" D x 1-5/8"T 4"W x 3-1/2" D x 1"T 4"W x 3-1/2" D x 1"T Finishes Ives Finish USP SP28 SPBLK BHMA 600 689 622 G BHMA Miscellaneous Hardware SPBLK F SP28 Exterior Hardware USP E Finishes Ives Finish 4" W x 3" D x 15/16" T 4" W x 3-1/4" D x 1-5/8" T Stops Over 2-1/2" Up to 2-1/2" D 4-3/4" Min. 4-3/4" Min. Latches, Catches & Bolts MB1 MB2 Dimensions C13 Stop Width Flush Bolts & Coordinators Jamb Depth B MB1F, MB2F and MB3F MB1V, MB2V and MB3V Product Pulls & Plates • Allows stop mounted hardware to be properly installed without damaging the COR coordinator, such as a parallel arm closer or a non-fire-rated surface vertical rod strike. • Stop mounted hardware will need to be lowered to compensate for the height of the coordinator and mounting bracket. • MB mounting brackets are made of aluminum A Mounting Brackets Hinges & Pivots MB1and MB2 C13 USA 1.877.671.7011 Canada 1.905.403.1800 www.ives.ingersollrand.com A Hinges & Pivots C14 B Latches, Catches & Bolts D Meets ANSI/BHMA A156.3, Type 21. UL Listed for Fire Doors. CB1 Gravity Coordinators • When active door is open, coordinator prevents active door from closing until inactive door bypasses. Closing of inactive door causes strike plate on top of door to contact cam and lift arm, allowing active door to close. As inactive door continues closing, roller rides over strike plate on to door bracket, holding arm above active door. • Non-handed. • Gravity action arm and door bracket are adjustable on the job for ease of installation. Rubber roller provides quiet and efficient operation, and helps protect the astragal and doors from damage. • Nylon roller on short arm glides smoothly over door bracket and strike, ensuring silent operation. • Made of forged brass. • COR7G for use on pairs of doors with astragal on active door up to 4' or with astragal on inactive door up to 3'4" or with astragal on both doors up to 2'10" • COR9G for use on pairs of doors with astragal on active over 4' or with astragal on inactive door over 3'4" or with astragal on both doors over 2'10" Product Projection CORG7G CORG9G 7" 9" Finishes Ives Finish US3 US4 US10 US10B US26 US26D BHMA 605 606 612 613 625 626 Carry Bar • Used when it is possible for the inactive door to be opened before the active door. • Prevents damage to the doors and other hardware. • Nylon roller insures quiet and efficient operation. • Non-handed. • All-steel construction. • Standard sex bolts for mounting. Stops E COR7G and COR9G Flush Bolts & Coordinators Pulls & Plates Coordinators – Gravity Coordinators F Exterior Hardware G Miscellaneous Hardware Meets ANSI/BHMA A156.3, Type 21. Finishes Ives Finish US3 US4 US10 US10B US26 BHMA 605 606 612 613 625 US26D SPBLK 626 622 USP 600 C14 USA 1.877.671.7011 Canada 1.905.403.1800 www.ives.ingersollrand.com Ordering Guide – Bar Coordinators Stops E Exterior Hardware F Miscellaneous Hardware G - 36" __ D D __ Latches, Catches & Bolts - C15 - FL20 ____ Flush Bolts & Coordinators US28 ____ B - Pulls & Plates 52 __ A COR Hinges & Pivots How to Order COR and Accessories COR Size: 32, 42, 52, 60, 72 Finishes: US28, US26D, 315AN Filler Bar (if desired): FL20, FL32, FL44 Vertical Rod Exit Device Cutout Type (if applicable): A, B, C, D, E, F, G If other Vertical Rod Exit Device not listed on chart, from page C16, include information as shown on page C16. Active Door Size – Required for ALL Vertical Rod Exit Device Applications X To determine the size COR you need: 1. Start with the active door width (X). 2. Next consider the overall frame opening between stops (F). 3. Preferably, the coordinator would equal the active door width (X) + approximately 1/2 inactive door width (Y). The coordinator must be 6" longer than the active door width (X) and less than the overall frame opening between stop (F). ACTIVE DOOR WIDTH Y INACTIVE DOOR WIDTH INACTIVE LEAF ACTIVE LEAF W COORDINATOR STOP WIDTH F V STOP THICKNESS Examples: • Pair of 30" Doors, 5/8" Stops Active Door Size, X = 30" Overall Frame Opening between Stops, F = 58-3/4" Recommended Coordinator: COR42 • Pair of 36" Doors, 5/8" Stops Active Door Size, X = 36" Overall Frame Opening between Stops, F = 70-3/4" Recommended Coordinator: COR52 • 36" Active Door, 18" Inactive door, 5/8" Stops Active Door Size, X = 36" Overall Frame Opening between Stops, F = 52-3/4" Recommended Coordinator: COR42 • 48" Active Door, 24" Inactive Door, 5/8" Stops Active Door Size, X = 48" Overall Frame Opening between Stops, F = 94-3/4" Recommended Coordinator: COR60 C15 USA 1.877.671.7011 Canada 1.905.403.1800 www.ives.ingersollrand.com A Hinges & Pivots Coordinators Special Factory Preparation for Use with Vertical Rod Exit Devices Coordinators may need to be prepared at the factory for use with some surface or concealed vertical rod exit devices. (See Chart below) B Pulls & Plates C16 D Latches, Catches & Bolts Flush Bolts & Coordinators If the exit device is not listed the following information is needed. 1. Exit Device Manufacturer and Model No. 2. Active Door Size, “X” 3. Inactive Door Size, “Y” 4. Exit Device Backset, “U” 5. Stop Width, “W” 6. Stop Thickness if other than 5/8", “V” Exit Device Manufacturer Exit Device Number Device Backset Von Duprin 5547-F 2-3/8" Von Duprin 8827-F 2-3/4" Von Duprin 8847-F 2-3/8" E Stops Von Duprin Von Duprin F Exterior Hardware G Miscellaneous Hardware Von Duprin Monarch Monarch 33/3547 33/3547-F 98/9947 98/9947-F 33/3548 33/3548-F 98/9948 98/9948-F 33/3547WDC 33/3547WDC-F 98/9947WDC 98/9947WDC-F 17-C F-17-C 18-C F-18-C XX-C F-XX-C 24-C F-24-C 25-C F-25-C 17-C-WDC F-17-C-WDC 18-C-WDC F-18-C-WDC XX-C-WDC F-XX-C-WDC 24-C-WDC F-24-C-WDC 25-C-WDC F-25-C-WDC Maximum Active Door Coordinator Size Needed 33" 43" 51" 63" 33" 43" 51" 63" 33" 43" 51" 63" 33" 43" 51" 64" 33" 43" 51" 64" 34" 44" 52" 65" 42" 52" 60" 72" 42" 52" 60" 72" 42" 52" 60" 72" 42" 52" 60" 72" 42" 52" 60" 72" 42" 52" 60" 72" 2-3/4" 33" 43" 51" 63" 2-13/16" 33" 43" 51" 63" 2-3/4" 2-3/4" 1-5/16" Coordinator Cutout Type Mounting Bracket Needed Type A None Type B MB1V, MB2V or MB3V see page C3 Type C None Type D None Type D None Type E None 42" 52" 60" 72" Type F None 42" 52" 60" 72" Type G None C16 USA 1.877.671.7011 Canada 1.905.403.1800 www.ives.ingersollrand.com Surface Bolts, Latches & Catches B Flush Bolts & Coordinators C Latches, Catches & Bolts D1 Stops E Exterior Hardware F Miscellaneous Hardware G Roller Latch RL30 Roller Latch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .D8 RL32 Roller Latch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .D8 RL36 Roller Latch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .D9 RL38 Roller Latch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .D9 RL1152 Roller Latch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .D10 STK685 Strike Plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .D10 STK685L Strike Plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .D10 Pulls & Plates Door Guards 481 Chain Door Guard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .D7 482 Solid Bar Door Guard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .D7 A Surface Bolts page SB360 Surface Bolt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .D2 SB453 Surface Bolt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .D2 SB1600 Surface Bolt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .D3 SB1601M1 Surface Bolt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .D3 SB1601M2 Surface Bolt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .D3 40 Surface Bolt, Decorative . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .D4 253 Surface Bolt, Decorative . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .D5 S48 Mortise Door Bolt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .D6 054 Dutch Door Bolt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .D6 Hinges & Pivots Table Of Contents Angle Stop AS18 Angle Stop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .D11 AS895 Angle Stop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .D11 Latches/Catches CL11 Invisible Latch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .D12 CL12 Invisible Latch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .D12 CL14 Auxiliary Pusher . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .D12 CL21 Ball Catch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .D13 CL21A Ball Catch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .D13 CL22 Ball Catch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .D13 325 Magnetic Catch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .D14 326 Magnetic Catch, Heavy Duty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .D14 327 Magnetic Catch, Heavy Duty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .D14 330 Roller Catch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .D15 335 Roller Catch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .D15 336 Roller Catch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .D15 345 Ball Catch, Adjustable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .D16 347 Ball Catch, Dual Adjustable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .D16 349 Ball Catch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .D16 D1 USA 1.877.671.7011 Canada 1.905.403.1800 www.ives.ingersollrand.com Surface Bolts A Hinges & Pivots B Pulls & Plates C D2 E Stops F Exterior Hardware Miscellaneous Hardware G • Surface Bolt has 1-1/4" throw for maximum security. • Jimmy-resistant design, bolt locks automatically when thrown, can be released only be pressing knob toward door while retracting. • Ideal for all types of doors. • Available in 12" length • Unit locks in both the up and down position. • Accepts padlock (not furnished) with maximum 3/8" diameter shackle, minimum 1-3/4" shackle opening height. • Units packed with one-way screws for added security. Standard screws also supplied. • Units packed with both a universal top strike (US) and a mortise bottom strike (MS). • Constructed of heavy duty steel. • Optional Sex Bolts available. • Optional Mortise Strike available. Dimensions Meets ANSI/BHMA A 156.16 UL listed 3 hour fire door, up to 10'0" Miami Dade County NOA Listed Bar: 3/4" Wide x 3/4" Thick Overall Width: 2-1/32" Overall Projection: 2-1/16" Top Strike: 1-1/2" Wide x 1-1/2" Long x 3/16" Thick Optional Mortise Strike: 1-5/8" Wide x 3-1/2" Long x 1/8" Thick Finishes Ives Number Latches, Catches & Bolts Flush Bolts & Coordinators SB360 Surface Bolt BHMA US2C 603 SB453 Surface Bolt • • • • • • Surface Bolt has 1-3/16" throw for maximum security. Strong tension springs prevent creep. Ideal for all types of doors. Available 8" & 12" lengths. Units packed with standard screws for added security. Units packed with both a universal top strike (US) and a mortise bottom strike (MS). • Constructed of heavy duty steel. • Optional Sex Bolts available. • Optional Thru Bolts available. Dimensions Meets ANSI/BHMA A156.16 L84161 UL listed 3 hour fire door, up to 10'0" Bar: 3/4" Wide x 1/4" Thick Overall Width: 2-1/32" Overall Projection: 1-5/16" Top Strike: 1-1/2" Wide x 1-1/2" Long x 3/16" Thick Bottom Strike: 1-5/8" Wide x 3-1/2" Long x 1/8" Thick Finishes Ives Number BHMA US2C US3 US4* US10 603 632 633 639 US10B US26D 640 652 * only available in 8” bolt length. D2 USA 1.877.671.7011 Canada 1.905.403.1800 www.ives.ingersollrand.com Surface Bolts C Latches, Catches & Bolts D3 Stops E Exterior Hardware F Miscellaneous Hardware G Dimensions Body: 8" Long x 7/8" Wide x 3/4" Thick, Overall Knob or Lock Housing Projection: 1-1/2" Top Strike: 1-1/4" Wide x 7/8" Tall x 15/16" Deep Bottom Strike: 3" Long x 1" Wide x 1/8" Thick SB1630 Finishes steel Ives Number US2G US10B BHMA 604 BHMA 605 SB1600M1 SB1600M2 US26D 640 SB1640 Finishes brass Ives Number US3 US10B SB1600M1 Flush Bolts & Coordinators 1640 meets ANSI/BHMA A156.16, L24161. B 1630 meets ANSI/BHMA A156.16, L84161 and UL listed 3 hour fire doors up to 8'0" in height. Pulls & Plates • • • • • Standard Surface Bolt has 1" throw for maximum security. Ideal for all types of doors. Fully concealed mounting prevents vandalism. Available in locking version. Unit locks in both the up and down position. Locking Bolts are furnished with 2 keys in 4 keying variations. Units packed with wood and machine screws to meet most field conditions. Units available with either a universal top strike (T) or a flat bottom strike (B). 1630 Series is constructed of heavy duty steel. 1640 Series is constructed of brass. Optional sex bolts available A • • • • Hinges & Pivots SB1600 Surface Bolt 652 US26D 613 626 Surface Bolt • Standard Surface Bolt has 3-1/2" throw for maximum security and for doors with larger undercuts. • Sleek handle design. • Ideal for all types of doors. • Fully concealed mounting prevents vandalism. • Available in locking version. Unit locks in both the up and down position. Locking bolts are furnished with 2 keys in 4 keying variations. • Units packed with wood and machine screws to meet most field conditions. • Units available with either a universal top strike (T) or a flat bottom strike (B). • Constructed of heavy duty steel. • Optional sex bolts available SB1600M2 UL listed 3 hour fire doors up to 8'0" in height. Dimensions Bar: 11" Long x 3/4" Wide x 3/4" Thick, locking version 1-1/2" Thick Top Strike: 1-1/4" Wide x 7/8" Tall x 15/16" Deep Bottom Strike: 3" Long x 1" Wide x 1/8" Thick Finishes Ives Number SP4 SP10 SP28 SP313 SPBLK BHMA 706 691 689 695 622 D3 USA 1.877.671.7011 Canada 1.905.403.1800 www.ives.ingersollrand.com A Hinges & Pivots B Pulls & Plates Decorative Surface Bolts 40 Decorative Surface Bolt • Concealed screw design enhances appearance and security. • Exceptional strength and durability provided by interlocking construction of heavy gauge track and rod. • Permanent stop prevents rod disengagement from track. • Tension spring holds bolt in desired position. • Track assures smooth operation and interlocks with side edges of rod to eliminate marring. • Decorative 5/8" diameter knob designed to facilitate bolt operation. • Made from extruded brass or aluminum. • Available in 3", 4" and 6" lengths. • Packed with both Universal and Mortise Strikes. Optional Surface Strike available. C D4 Latches, Catches & Bolts Flush Bolts & Coordinators Dimensions Meets ANSI/BHMA A156.16 Throw: 15/16" Projection: 3/4" Width: 11/16" Length: 3", 4" or 6" Finishes brass Ives Number B3 B5 B10B B15 B26 B26D BHMA 609 613 619 625 626 Finishes aluminum Ives Number A3* A15* PA28 A716* BHMA 670 628 605 666 E Stops F Exterior Hardware G Miscellaneous Hardware * only available 3” bolt Schlage Carded. D4 USA 1.877.671.7011 Canada 1.905.403.1800 www.ives.ingersollrand.com Decorative Surface Bolts G 626 Miscellaneous Hardware 613 F 605 Exterior Hardware BHMA E B26D Stops B10B D5 B3 Latches, Catches & Bolts Finishes Ives Number C Meets ANSI/BHMA A156.16 Flush Bolts & Coordinators Throw: 1-1/8" Projection: 1-5/16" Half Round Rod: 5/8" Overall Width: 1-5/8" Length: 8" or 12" B Dimensions Pulls & Plates • Heavy duty, decorative bolt ideal where extra strength required • Decorative 1-1/4" diameter knob fits well with any décor and designed to facilitate bolt operation. • Made from solid brass. • Available in 8" and 12" lengths. • Packed Universal Strike (US) & Mortise Strike (MS). A Decorative Surface Bolt Hinges & Pivots 253 D5 USA 1.877.671.7011 Canada 1.905.403.1800 www.ives.ingersollrand.com A Hinges & Pivots B C E Stops F Exterior Hardware G Miscellaneous Hardware D6 054 Dutch Door Bolt • Practical, rugged, attractive bolt for application on dutch doors as well as other areas. • Chamfered rod end draws the two leaves of door tightly together. • Sufficient tolerance provided in strike opening to allow for misalignment of door leaves and also prevents binding of bolt. • Decorative 1" diameter knob designed to facilitate bolt operation. • Made from solid brass. • Packed with Standard Strike (SS), Mortise Strike (MS) and Universal Strike (US). Dimensions Meets ANSI/BHMA A156.16. Latches, Catches & Bolts Flush Bolts & Coordinators Pulls & Plates Dutch Door & Mortise Door Bolts Throw: 5/8" Projection: 1-1/8" Half Round Rod: 5/8" Overall Width: 1-5/8" Rod Length: 4-1/4" Overall Length: Specify 4-3/8" (Including Knob) Finishes Ives Number B3 B4 B10 B10B B15 B26 B26D BHMA 605 606 612 613 619 625 626 S48 Mortise Door Bolt • Brass oval turn knob and escutcheon. • Steel bolt for extra strength. Rack is milled for precision fit with pinion. Dimensions Backset: Bolt Throw: Bolt Diameter: Case: Strike: Meets ANSI/BHMA A156.16. 1-3/4" 1/2" 1/2" 2-1/2" Long x 9/16" diameter 1-3/4" High x 7/8" Wide Finishes brass Ives Number B3 B5 B10B B15 B26 B26D BHMA 609 613 619 625 626 605 D6 USA 1.877.671.7011 Canada 1.905.403.1800 www.ives.ingersollrand.com Door Guards F15 F26 F26D BHMA 633 638 639 646 651 652 632 482 F716 Solid Bar Door Guard • For use on doors that are flush with frames. • The solid bar, interlocking with the ball on the strike plate, permits the door to be slightly opened to allow viewing. • The hinged bar allows the door guard to be positioned 180° away from the door when not in use. • Edge guard only, furnished with cast brass door guards, minimizes the chance for marring the door or frame. • Strike plate is designed to prevent the solid bar from marring the inside of the door when in use. • Made from cast brass or cast aluminum. • Packed with sheet metal screws. • Shims available in US26D (626) only, 1/8” or 3/8”. Meets ANSI/BHMA A156.16 Cast Brass Dimensions Cast Aluminum Dimensions Strike Plate: 2-5/8" High x 1-1/32" Wide Strike Plate: 2-1/2" High x 7/8" Wide Holder: 1-3/4" High x 1-1/16" Wide Holder: 2-1/2" High x 15/16" Wide Arm Length: 4-3/4" Arm Length: 3-13/16" Edge Guard: 1-1/8" High x 1-1/32" Wide Finishes brass Ives Number B3 B4 B10 B10B B15 B26 B26D BHMA 605 606 612 613 619 625 626 Finishes aluminum Ives Number A3 A5 A26 A26D 672 702 BHMA 666 G F10 Miscellaneous Hardware F5 F F4 Exterior Hardware Finishes steel Ives Number F3 E 626 Stops 605 D7 BHMA B26D Latches, Catches & Bolts Finishes brass Ives Number B3 C Door Plate: 3-3/8" Long x 1-7/16" Wide Chain Holder: 1-10/16" High x 3/4" Wide Chain Length: 4-3/4" Flush Bolts & Coordinators Dimensions B Meets ANSI/BHMA A156.16 Pulls & Plates • Permits the door to be slightly opened to allow viewing. • Narrow chain holder maintains chain in stationary position when door guard is not in use, eliminating marring of door and frame caused by dangling chain. • Welded twist link steel chain finished to match door plate and chain holder. • Made from wrought brass or burnished wrought steel. • Packed with sheet metal screws. A Chain Door Guard Hinges & Pivots 481 D7 USA 1.877.671.7011 Canada 1.905.403.1800 www.ives.ingersollrand.com A Hinges & Pivots B C Flush Bolts & Coordinators D8 Latches, Catches & Bolts E F Exterior Hardware G Miscellaneous Hardware Stops Pulls & Plates Roller Latches RL30 Roller Latch • Actuation is simple, closing of the door causes the roller to fall in the depression of the strike, thereby holding the door closed. • The projection of the roller is easily adjusted using adjusting screws on the face of the unit. • Maximum projection of the roller is 3/8" allowing for variance in the door clearance. • Nylon Roller Standard. • Forged Brass Construction. • Optional Strike—A—ASA. • Optional— F — Brass Roller, must be ordered separately. Meets ANSI/BHMA A156.16, E19091 Dimensions Body: 1" Wide x 3-3/8" High x 1-11/16" Deep Strike: 1-11/16" Wide x 2-1/4" High x 5/32" Thick, Lip to Center- 1-5/16" Optional ASA Strike: 1-1/4" Wide x 4-7/8" High x 3/32" Thick, Lip to Center- 1-1/4" Finishes brass Ives Number US3 US4 US10 US10B US26 US26D BHMA 606 612 613 625 626 RL32 605 Roller Latch • Actuation is simple, closing of the door causes the roller to fall in the depression of the strike, thereby holding the door closed. • The projection of the roller is easily adjusted by turning knurled knob on back of latch. • Maximum projection of the roller is 1/2" allowing for variance in the door clearance. • Fits heavy-duty cylindrical lock cutout. • Nylon Roller Standard. • Non-handed. • Brass Construction. • Optional Strike—A—ASA. Meets ANSI/BHMA A156.16, E19091 Dimensions Body: 1-1/8" Wide x 2-1/4" High x 2-1/4" Deep Strike: 1-1/8" Wide x 2-3/4" High x 3/32" Thick, Lip to Center- 1-1/4" Optional ASA Strike: 1-1/4" Wide x 4-7/8" High x 3/32" Thick, Lip to Center- 1-1/4" Finishes brass Ives Number US3 US4 US10 US10B US26 US26D BHMA 606 612 613 625 626 605 D8 USA 1.877.671.7011 Canada 1.905.403.1800 www.ives.ingersollrand.com Roller Latches Stops E Exterior Hardware F Miscellaneous Hardware G Dimensions Body: 1-3/8" Wide x 2" High x 7/8" Deep Strike: 1" Wide x 2-1/8" High x 3/8" Deep D9 Meets ANSI/BHMA A156.16, L27092 Latches, Catches & Bolts Roller Latch • Actuation is simple, closing of the door causes the roller to fall in the depression of the strike, thereby holding the door closed. • The projection of the roller is easily adjusted by turning slotted screw. • Maximum projection of the roller is 3/8" allowing for variance in the door clearance. • Nylon Roller. • Non-handed. • Stainless Steel Construction. C RL38 630 Flush Bolts & Coordinators BHMA B Finishes Stainless Steel Ives Number US32D Pulls & Plates Meets ANSI/BHMA A156.16, L57082 Dimensions Body: 1" Wide x 2-1/4" High x 2" Deep Strike: 1-1/8" Wide x 2-3/4" High x 3/32" Thick, Lip to Center- 1-1/4" Optional ASA Strike: 1-1/4" Wide x 4-7/8" High x 3/32" Thick, Lip to Center- 1-1/4" A Roller Latch • Actuation is simple, closing of the door causes the roller to fall in the depression of the strike, thereby holding the door closed. • The projection of the roller is easily adjusted by turning slotted screw on back of latch. • Maximum projection of the roller is 5/16" allowing for variance in the door clearance. • Fits cylindrical lock cutout. • Nylon Roller. • Non-handed. • Stainless Steel Construction. • Optional Strike–A—ASA. Hinges & Pivots RL36 Finishes Stainless Steel Ives Number US32D BHMA 630 D9 USA 1.877.671.7011 Canada 1.905.403.1800 www.ives.ingersollrand.com A Hinges & Pivots B C D10 RL1152 Dimensions Body: 1-1/2" Wide x 4-1/2" High x 1-3/4" Deep with 3/4" Angle Strike: 1-1/8" Wide x 2-1/4" High x 5/32" Thick Meets ANSI/BHMA A156.16, E19111 Finishes Ives Number US3 US4 US10 US10B US26 US26D BHMA 605 606 612 613 625 626 Optional Strike STK685 Strike • Custom make strike for doors that swing both directions. For use with roller latches. • Constructed of 3/32" brass. • Dimple of strike centered on strike. • Specify frame depth - A. Overall strike length will be A + 3/8” to accomodate 3/16” lip on each side 3/32" 1-11/16" Stops A E Roller Latch • Combination of RL30 Roller Latch and Angle Stop. • Actuation is simple, closing of the door causes the roller to fall in the depression of the strike, thereby holding the door closed. • The projection of the roller is easily adjustable using adjusting screws on the face of the unit. • Maximum projection of the roller is 3/8" allowing for variance in the door clearance. • Nylon Roller Standard. • Forged Brass Construction. • Optional— F — Brass Roller, must be ordered separately. Latches, Catches & Bolts Flush Bolts & Coordinators Pulls & Plates Roller Latches Finishes Ives Number US3 US4 US10 US10B US26 US26D BHMA 605 606 612 613 625 626 1-5/32" F Exterior Hardware 2-1/4" STK685L Strike • Custom make strike for doors that swing both directions. For use with roller latches. • Constructed of 3/32" brass. • Location of strike dimple is variable. Please specify frame depth - A and location of dimple from edge of frame - B. Dimple will be located B + 3/16" to accomodate lip. • Specify frame depth - A. Overall strike length will be A + 3/8” to accomodate 3/16” lip on each side A G Miscellaneous Hardware B Finishes Ives Number US3 US4 US10 US10B US26 US26D BHMA 605 606 612 613 625 626 D10 USA 1.877.671.7011 Canada 1.905.403.1800 www.ives.ingersollrand.com Angle Stops A Pulls & Plates B Flush Bolts & Coordinators C Latches, Catches & Bolts D11 Stops E Exterior Hardware F Miscellaneous Hardware G • Surface applied stop for single doors. • Large rubber bumper to ensure quiet operation. • Constructed of 1/8" Brass Angle. Hinges & Pivots AS895 Angle Stop Dimensions 1-1/2" Wide x 1" Angle x 2-1/2" Long Finishes Ives Number US3 US4 US10 US10B US26 US26D BHMA 605 606 612 613 625 626 AS18 Angle Stop • Surface applied stop for single and double doors. • Includes SR64 door silencers to ensure quiet operation. SR64 silencers are replaceable. • Constructed of 3/16" Brass Angle. Dimensions 1-1/2" Wide x 3/4" Angle x 3-1/2" Long Finishes Ives Number US3 US4 US10 US10B US26 US26D BHMA 605 606 612 613 625 626 D11 USA 1.877.671.7011 Canada 1.905.403.1800 www.ives.ingersollrand.com Invisible Latches A Hinges & Pivots B C Finishes Ives Number US3 US4 US10 US26D BHMA 605 606 612 626 CL12 Invisible Latch • • • • • Invisible latch is ideal for installations where no visible latch is desired. Unit can be installed at the top, bottom or side of the door. Can be mortised into the stop or surface mounted to the stop. Recommended for use on larger panels or regular size doors. Operation is simple, latching is accomplished by a slight push. To unlatch the door, a harder push releases the door and pushes the door out. • Brass and plastic construction. • Applies 27 pounds to open the door. Latches, Catches & Bolts D12 Dimensions Body: 1-1/4" Wide x 1-7/8" High x 7/16" Thick Strike: 9/16" Wide x 1-5/16" High x 9/16" High Stops F Exterior Hardware G E Invisible latch is ideal for installations where no visible latch is desired. Unit can be installed at the top, bottom or side of the door. Can be mortised into the stop or surface mounted to the stop. Recommended for use on small panels, cabinet doors or light weight closet doors. • Operation is simple, latching is accomplished by a slight push. To unlatch the door, a harder push releases the door and pushes the door out. • Brass and plastic construction. • Applies 13 pounds to open the door. Meets ANSI/BHMA 156.9, B03272 Meets ANSI/BHMA A156.9, B03272 Miscellaneous Hardware Invisible Latch • • • • Flush Bolts & Coordinators Pulls & Plates CL11 Dimensions Body: 1-1/4" Wide x 2-1/4" High x 9/16" Thick Strike: 5/8" Wide x 1-13/16" High x 9/16" Projection Finishes Ives Number US3 US4 US10 US26D BHMA 605 606 612 626 CL14 Auxiliary Pusher • Aid in the operation of the CL11 and CL12 where hinges or surrounding conditions prevent smooth operation of doors. • Provides 1-1/16" throw. • Nylon pusher. • Brass construction. • Applies 10 pounds to open the door. Meets ANSI/BHMA A156.9, B13282 Dimensions Body: 2-15/16" Long x 1-11/16" Wide x 5/8" Deep Finishes Ives Number US3 US4 US10 US26D BHMA 605 606 612 626 D12 USA 1.877.671.7011 Canada 1.905.403.1800 www.ives.ingersollrand.com Ball Catches CL21 Ball Catch D13 Stops E Exterior Hardware F Miscellaneous Hardware G Dimensions Body: 3/4" Wide x 3" High x 3/4" Deep Strike: 7/16" Wide x 1-3/4" High x 7/8" Deep Latches, Catches & Bolts • Four-way catch with plate type strike. • Ideal for closet doors, access doors, hinged openings and numerous other applications. • The strike slides between two stainless steel balls that are under spring tension. As the strike engages, the door is held tightly shut. • Strike can enter body from any direction. • Spring tension is easily adjusted to suit field conditions. • Body can be surface applied or mortised. • Brass construction. C CL21A Ball Catch Flush Bolts & Coordinators 626 B BHMA Pulls & Plates Finishes brass Ives Number US26D A Meets ANSI/BHMA A156.9 Dimensions Body: 3/4" Wide x 3" High x 3/4" Deep Strike: 3/4" Wide Hex x 1-1/2" High Hinges & Pivots • Four-way catch with hexagon stud. • Ideal for holding medium duty doors. • The strike slides between two stainless steel balls that are under spring tension. As the strike engages, the door is held tightly shut. • Strike can enter body from any direction. • Spring tension is easily adjusted to suit field conditions. • Body can be surface applied or mortised. • Brass construction. Meets ANSI/BHMA A156.9, B13292 Finishes brass Ives Number US3 US4 US10 US26 US26D BHMA 606 612 625 626 CL22 605 Ball Catch • Three-way catch with plate type strike. • Ideal for smaller cabinet doors or panels. • The strike slides between two stainless steel balls that are under spring tension. As the strike engages, the door is held tightly shut. • Strike can enter body from either side or front. • Spring tension is easily adjusted to suit field conditions. • Body can be surface applied or mortised. • Brass construction. Meets ANSI/BHMA 156.9, B13302. Dimensions Body: 1/2" Wide x 2-3/16" High x 1/2" Deep Strike: 3/8" Wide x 1-3/8" High x 5/8" Deep Finishes brass Ives Number US3 US4 US10 US26 US26D BHMA 606 612 625 626 605 D13 USA 1.877.671.7011 Canada 1.905.403.1800 www.ives.ingersollrand.com A Hinges & Pivots B C D14 Latches, Catches & Bolts Magnetic Catch • Double pole. • Self aligning magnet insures maximum pull. • Case design allows easy magnet adjustment on cabinet or small door applications. • Aluminum case. • Packed with sheet metal screws. • 5 lbs. Load Capacity Meets ANSI/BHMA A156.9 B43171. Dimensions Case: 1-1/8" wide x 2-1/16" Long x 5/8" Thick Finishes aluminum Ives Number A3 A92 BHMA 673 666 Mighty-Mite® Heavy Duty Magnetic Catch 326 • • • • • Dual double pole. Self-aligning magnets insure maximum pull. Can be surface mounted or mortised. Aluminum case. Packed with sheet metal screws, 2 short strikes and 1 long strike. • 9 lbs. Load Capacity Meets ANSI/BHMA A156.9 B43161. Dimensions Case: 1" Wide x 3-1/8" Long x 9/16" Thick Stops E 325 Flush Bolts & Coordinators Pulls & Plates Magnetic Catches Finishes aluminum Ives Number A3 A92 BHMA 673 666 Super-Mite® Heavy Duty Magnetic Catch G • • • • • Dual triple pole. Self-aligning magnets insure maximum pull. Can be surface mounted or mortised. Aluminum case. Packed with sheet metal screws, 2 short strikes and 1 long strike. • 14 lbs. Load Capacity Exterior Hardware Miscellaneous Hardware F 327 Meets ANSI/BHMA A156.9 B43161. Dimensions Case: 1" Wide x 3-1/8" Long x 3/4" Thick Finishes aluminum Ives Number A3 A92 BHMA 673 666 D14 USA 1.877.671.7011 Canada 1.905.403.1800 www.ives.ingersollrand.com Roller Catches B3 B5 B10 B10B B15 B26 B26D BHMA 605 609 612 613 619 625 626 336 Roller Catch • Smooth, positive latching action insured by powerful conical spring. • Durable nylon roller insures quiet operation. • Adjustable tension. Adjustments can be varied from 4 to 17 lbs. of holding power making possible a wide range of door performance. • Easily installed on thin doors. • Standard box type strike designed for neat appearance. • Made from wrought brass or wrought steel. • Packed with sheet metal screws. Dimensions Face Plate: 7/8" Wide x 2-1/4" High Bore: 13/16" Diameter x 1-3/4" Deep Strike: 7/8" Wide x 2-1/4" High, Lip to center- 1-1/8" Meets ANSI/BHMA A156.16 L27081 for brass and L87801 for steel. G Finishes Ives Number Miscellaneous Hardware Meets ANSI/BHMA A156.16 L27081 for brass and L87081 for steel. Dimensions Face Plate: 7/8" Wide x 2-1/4" High Bore: 1-3/4" Deep x 13/16" Diameter Strike: 1-5/8" Wide x 2-1/4" High, Lip to center- 1-3/16" F • Smooth, positive latching action insured by powerful conical spring. • Durable nylon roller insures quiet operation. • Adjustable tension. Adjustments can be varied from 4 to 17 lbs. of holding power making possible a wide range of door performance. • Easily installed on thin doors. • Full lip style strike designed for simplified mortising. • Made from wrought brass or wrought steel. • Packed with sheet metal screws. Exterior Hardware Roller Catch E 335 Stops 603 D15 BHMA Latches, Catches & Bolts F2C C Finishes Ives Number Flush Bolts & Coordinators Dimensions Case: 1-1/4" High x 11/16" Wide Strike: 1-1/4" High x 3/8" Wide B Meets ANSI/BHMA A156.9 B83071. Independent rollers allow positive action and self-alignment. Cushioned rollers absorb shock and noise, hold door away from cabinet. Application allows for easy adjustment. Made from wrought steel. Packed with screws and brads. Pulls & Plates • • • • • A Roller Catch Hinges & Pivots 330 Finishes Ives Number B3 B4 B5 B10 B10B B15 B26 B26D BHMA 605 606 609 612 613 619 625 626 D15 USA 1.877.671.7011 Canada 1.905.403.1800 www.ives.ingersollrand.com B Hinges & Pivots 345 Dimensions Face Plate: Bore: Strike: C Flush Bolts & Coordinators D16 B10 B10B B15 B26 B26D BHMA 609 612 613 619 625 626 605 Dual Adjustable Ball Catch • • • • • • • For catch in door installations. Dual adjustment for door clearance and holding strength. Lip strike is designed for use where strike is mounted in jamb. Free rolling ball insures smooth, positive and trouble-free action. Adjustable threaded barrel compensates for various door clearances. Adjustable spring tension. Made from wrought brass. Dimensions Face Plate: Bore: Strike: Meets ANSI/BHMA A156.9 B23013. 1" Wide x 2-1/8" High 7/8" Diameter x 1-3/8" Deep 1-3/8" Wide x 2-1/8" High, Lip to center- 7/8" Finishes brass Ives Number B3 B4 B5 B10 B10B B15 B26 B26D BHMA 606 609 612 613 619 625 626 605 Ball Catch • For catch in door installations. • Radiused corners allow easy installation with a router. • Dual adjustment for door clearance and holding strength. • Lip strike is designed for use where strike is mounted in jamb. • Free rolling ball insures smooth, positive and trouble-free action. • Adjustable threaded barrel compensates for various door clearances. • Adjustable spring tension. • Made from wrought brass. Exterior Hardware F G 3/4" Wide x 1-1/2" High 1" Deep x 9/16" Diameter 25/32" Wide x 1-1/2" High, Lip to center- 13/32" B5 349 Miscellaneous Hardware Ideal for cabinets and small interior doors. Free rolling ball insures smooth, positive and trouble-free action. Adjustable threaded barrel compensates for various door clearances. Adjustable spring tension. Made from wrought brass. Finishes brass Ives Number B3 347 Stops Latches, Catches & Bolts Meets ANSI/BHMA A156.9 B23013. E Adjustable Ball Catch • • • • • Pulls & Plates A Ball Catches Dimensions Face Plate: Bore: Strike: Meets ANSI/BHMA A156.9 B23013. 1" Wide x 2-1/8" High 7/8" Diameter x 1-3/8" Deep 1-3/8" Wide x 2-1/8" High, Lip to center- 7/8" Finishes brass Ives Number B3 B4 B5 B10 B10B B15 B26 B26D BHMA 606 609 612 613 619 625 626 605 B716 D16 USA 1.877.671.7011 Canada 1.905.403.1800 www.ives.ingersollrand.com Door Stops C Latches, Catches & Bolts D Stops E1 Exterior Hardware F Miscellaneous Hardware G Kick Down Holder FS452 Kick Down Holder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E16 FS455 Kick Down Holder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E16 FS544, FS555 Kick Down Holder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E17 Flush Bolts & Coordinators Wall Holders WS40 Automatic Wall Holder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E15 WS45, WS45X Automatic Wall Holder . . . . . . . . . . . . . . . . . . . . . . . . . .E15 B Wall Bumpers/Stops WS11, WS11X Wall Stop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E9 WS20, WS20X Manual Wall Holder . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E9 WS33, WS33X Wall Stop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E10 WS65 Wall Stop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E10 WS401, WS402 Wall Bumper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E11 WS404 Wall Bumper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E11 WS406, WS407 Wall Bumper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E12 411R Wall Bumper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E13 WS443, WS447 Wall Stop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E14 WS445, WS449 Manual Wall Holder . . . . . . . . . . . . . . . . . . . . . . . . . . .E14 Pulls & Plates Floor Stop & Holder FS9 Floor Stop & Semi-automatic Holder . . . . . . . . . . . . . . . . . . . . . . . .E6 FS40, FS41, FS42, FS43 Floor Stop & Automatic Holder . . . . . . . . . . . . .E6 FS446, FS450 Floor Stop & Manual Holder . . . . . . . . . . . . . . . . . . . . . . .E7 FS495, FS496, FS497 Floor Stop & Automatic Holder . . . . . . . . . . . . . . .E8 A Floor Stops page FS13 Floor Stop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E2 R14 Riser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E2 FS17 Floor Stop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E2 FS18, FS18L Floor Stop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E3 FS436 Floor Stop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E4 FS438 Floor Stop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E4 R435 Riser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E4 R437 Riser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E4 430 Floor Stop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E4 FS441, FS441WS Floor Stop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E5 FS444, FS448 Floor Stop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E5 Hinges & Pivots Table Of Contents Plunger Door Holders FS1153 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E18 FS1154 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E18 Roller Bumpers RB470, RB471, RB472 Roller Bumper . . . . . . . . . . . . . . . . . . . . . . . . . .E19 Residential Door stops 060, 061 Flexible Door Stop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E20 60, 61 Door Base Stop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E20 63 Flexible Door Stop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E21 64 Door Base Stop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E21 Hinge Pin Stops 69 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E21 70 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E22 72Z Residential Door Saver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E22 73Z Commercial Door Saver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E22 Silencers SR64, SR65, SR66 Door Silencer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E23 E1 USA 1.877.671.7011 Canada 1.905.403.1800 www.ives.ingersollrand.com A Hinges & Pivots B Pulls & Plates C D • Standard FS13 for use where no threshold is used. • Heavy-Duty Cast Dome Stops constructed of brass. • Unique riser design of R14 (below) allows easy conversion to threshold application. • Units are packed with fasteners sufficient for mounting in all types of floor construction, including concrete. • Replaceable grey rubber bumper. Meets ANSI/BHMA 156.6, L12141. Dimensions Overall Height: 1" Base Height: 5/32" Base Diameter: 1-3/4" Finishes Ives Number US3 US4 US10 US10B US26 US26D BHMA 605 606 612 613 625 626 R14 Exterior Hardware Miscellaneous Hardware F Dome Stop Rise • Adapts the FS13 Dome Stop to threshold use. • Brass Die Cast Construction. Dimensions Riser Height: 5/16" Base Diameter: 1-3/4" round Finishes Ives Number US3 US4 US10 US10B US26 US26D BHMA 605 606 612 613 625 626 FS17 G Dome Stop Stops E2 FS13 Latches, Catches & Bolts Flush Bolts & Coordinators Floor Stops — Dome Dome Stop • One piece dome stop for use with thresholds. • Heavy-Duty Cast Dome Stops constructed of brass. • Units are packed with fasteners sufficient for mounting in all types of floor construction, including concrete. • Replaceable grey rubber bumper. Dimensions Meets ANSI/BHMA 156.6, L12161. Overall Height: 1-11/32" Base Height: 1/2" Base Diameter: 1-3/4" round Finishes Ives Number US3 US4 US10 US10B US26 US26D BHMA 605 606 612 613 625 626 E2 USA 1.877.671.7011 Canada 1.905.403.1800 www.ives.ingersollrand.com Floor Stops — Dome US26 US26D BHMA 606 609 612 613 619 620 625 626 605 B716 * only available for FS436 in slim pack of 15 per box. Finishes aluminum Ives Number US28 BHMA 628 R435 R437 Riser for FS436 Dome Stop Riser for FS438 Dome Stop • • • • Extruded aluminum, mill finish. R435 for conversion of FS436 Dome Stop to carpet installation. R437 For conversion of FS438 Dome Stop to carpet installation. Packed with wood screws, lead shield and stud. Specify Tampin (TPN) if required. Dimensions Available in 1/4", 3/8", 1/2", 5/8", 3/4" and 1" height. G US620* Miscellaneous Hardware US15 F US10B Exterior Hardware US10 E3 US5 Stops US4 D Finishes brass Ives Number US3 Latches, Catches & Bolts FS438 Meets ANSI/BHMA 156.16, L12141 for brass or bronze and L32141 for aluminum. C FS438 Overall Height: 1-3/8" Base Height: 9/16" Base Diameter: 1-3/4" x 2" Oval Flush Bolts & Coordinators FS436 Overall Height: 1" Base Height: 3/16" Base Diameter: 1-3/4" x 2" Oval B Dimensions Pulls & Plates FS436 Meets ANSI/BHMA 156.16, L12141 for brass or bronze and L32141 for aluminum. A • FS436 for doors without threshold. • FS438 for doors with threshold or undercut doors. • Heavy-Duty Cast Dome Stops constructed of brass, bronze or aluminum. • Packed with wood screw and plastic anchor. Replaceable gray, non-marring rubber bumper. Hinges & Pivots FS436 Dome Stop FS438 Dome Stop 1" 1-7/16" 1" OR LESS PAD FLOOR E3 USA 1.877.671.7011 Canada 1.905.403.1800 www.ives.ingersollrand.com A B Pulls & Plates Flush Bolts & Coordinators C D Latches, Catches & Bolts FS18S FS18L Floor Stops FS18S • Security Door Stops designed for use in high vandalism areas. • Molded from black flame resistant, resilient material around a heavy-duty stud. • Once grouted in concrete, leaves no exposed fasteners to be tampered with or removed. • Ideal for jail or security cell areas where floor mounted stops are required. • FS18L also ideal for concrete wall applications. FS18L Dimensions FS18S Height: 1-1/2" FS18L Height: 3-1/2" FS18S Diameter: 2" FS18L Diameter: 2" FS18S Stud Length: 2-1/2" FS18L Stud Length: 2-1/2" FS434 Floor Stop • • • • Dimensions Overall Height: 2-5/8" Base Size: 1-1/2" W x 2-3/4" L Finishes Ives Number USC BHMA 604 Miscellaneous Hardware F Exterior Hardware 430 G Burnished wrought steel. For undercut doors up to 1-1/2". Packed with screws and plastic anchors. Replaceable soft, resilient gray rubber. Stops E4 Hinges & Pivots Floor Stops Floor Door Stop • • • • Burnished wrought steel. For undercut doors up to 1-1/2". Packed with screws and plastic anchors. Replaceable soft, resilient gray rubber. Dimensions Overall Height: 1-5/16" Base Diameter: 1-1/4" Finishes brass Ives Number B3 B4 B5 B10B B15 B26 B26D BHMA 605 606 609 613 619 625 626 Finishes aluminum Ives Number A3* A5 A14 A92 669 673 BHMA 666 * only available in Slim-Pak of 25 E4 USA 1.877.671.7011 Canada 1.905.403.1800 www.ives.ingersollrand.com Floor Stops Flush Bolts & Coordinators C Latches, Catches & Bolts D Stops E5 Exterior Hardware F Miscellaneous Hardware G Overall Height: 2-1/8" B Dimensions Pulls & Plates Meets ANSI/BHMA 156.16, L12131 for brass A • Accommodates door undercut up to 1-1/2". • Designed to blend well with all types of construction and provide a minimum of hindrance to cleaning efforts. • Heavy-Duty cast brass or aluminum construction. • Replaceable Non-marring rubber bumper. FS441 packed with expansion shield and tampin for masonry type mounting, and wood screws for drywall mounting. Hinges & Pivots Floor Stop FS441 Overall Length: 2-7/8" Base Depth: 1-5/8" Finishes brass Ives Number US3 US4 US5 US10 US10B US15 US26 US26D BHMA 606 609 612 613 619 625 626 605 FS444 Floor Stop FS448 Floor Stop • Ideal for interior or exterior use. • Cast brass construction. • Accommodates door undercut up to 2-1/2". • Replaceable Non-marring rubber tip. FS444 is packed with expansion shield and lead shield, for masonry type mounting. FS448 is packed with wood screws, for drywall mounting. FS444 Meets ANSI/BHMA 156.16, L12131 for brass FS448 Meets ANSI/BHMA 156.16, L12121 for brass and L32121 for aluminum Dimensions Overall Height: 3" Base Diameter: 2-1/2" Finishes brass Ives Number US3 US4 US5* US10 US10B US15 US26 US26D BHMA 606 609 612 613 619 625 626 605 Finishes aluminum Ives Number US28* BHMA 628 * not available on FS444 E5 USA 1.877.671.7011 Canada 1.905.403.1800 www.ives.ingersollrand.com A Hinges & Pivots B C Flush Bolts & Coordinators D Latches, Catches & Bolts Pulls & Plates Floor Stops Floor Stop & Semi-Automatic Holder FS9 • Semi-automatic floor-mounted holders accommodates with door to floor clearance of 1-1/2" or less. • Cast from heavy-duty brass. • Activate holder by flipping the engagement tongue forward. When door is opened, the hook (mounted on door) engages the tongue. To release, push firmly on door to disengage tongue. • Universal screw pack accommodates all types of floor and door construction. Meets ANSI/BHMA 156.16, L11241. Dimensions Overall Height: 3-1/2 Base Dimensions: 2" wide x 3-1/2" long Finishes Ives Number US3 US4 US10 US10B US26 US26D BHMA 605 606 612 613 625 626 FS40 FS41 FS42 FS43 Floor Stop & Automatic Holder • Automatic door holders ideal for heavy-traffic situations that require a simple, fool-proof, Hold-Open device. • Forged from brass. • Unit is activated automatically when door is opened. A firm pull on door releases the mechanism. • Strikes accommodate different door to floor clearances. • Model numbers are determined by strike/door-to-floor clearances. • Holder position on door is adjustable. • Universal screw pack allows for installation in all types of door construction. Meets ANSI/BHMA 156.16, L11301 Stops Door to Floor Clearance: 1/8” CLEARANCE F Exterior Hardware E6 Dimensions FS40 FS41 FS42 FS43 1/2" or less 9/16" to 1-1/16" 1-1/8" to 1-9/16" 1-5/8" to 2-1/16" Holder Dimensions: 3" Wide x 3-11/16" High 1/2” Finishes brass Ives Number US3 US4 US10 US10B US26 US26D BHMA 606 612 613 625 626 605 1-3/16” SIDE VIEW BODY G Miscellaneous Hardware F40 MAX. DOOR CLEARANCE 1-3/4” CLEARANCE FROM 9/16 to 1-1/16 FS41 2-1/4” CLEARANCE FROM 1-1/8 to 1-9/16 FS42 CLEARANCE FROM 1-5/8 to 2-1/16 2-3/4” FS43 E6 USA 1.877.671.7011 Canada 1.905.403.1800 www.ives.ingersollrand.com Floor Stops B Flush Bolts & Coordinators C Latches, Catches & Bolts D Stops E7 Exterior Hardware F Miscellaneous Hardware G FS450 Meets ANSI/BHMA 156.16, L11361 for brass and L31371 for aluminum. Pulls & Plates FS446 Meets ANSI/BHMA 156.16, L11371 for brass and L31371 for aluminum. A Manual type floor holder ideal for interior or exterior use. Cast brass or aluminum construction. Accommodates door undercut up to 2-1/2". Replaceable non-marring rubber tip. Unit functions as a stop but serves as a Hold-Open device when hook is manually engaged in strike. Unit requires manual disengagement to release Hold-Open. FS446 packed with expansion shield and lead shield, for masonry type mounting FS450 packed with 3 wood screws, for drywall mounting. • • • • • Hinges & Pivots FS446 Floor Stop & Manual Door Holder FS450 Floor Stop & Manual Door Holder Dimensions Overall Height: 3-3/4 Height from Floor to Stop Center Line: 2-5/8" Stop Diameter: 1-1/16" Base Diameter: 2-1/12" Finishes brass Ives Number US3 US4 US10 US10B US15 US26 US26D BHMA 606 612 613 619 625 626 605 Finishes aluminum Ives Number US28 BHMA 628 E7 USA 1.877.671.7011 Canada 1.905.403.1800 www.ives.ingersollrand.com A Hinges & Pivots Floor Stops FS495 Wall Stop & Automatic Holder FS496 Floor Stop & Automatic Holder FS497 Floor Stop & Automatic Holder • Automatic door holders ideal for heavy-traffic situations that require a simple, Hold-Open device. • Cast brass construction. • Recommended installation is holder on door and strike on wall. • Holder position on door is adjustable. • Holder is tapered to prevent “child riding.” B C Flush Bolts & Coordinators Pulls & Plates FS495 shown FS495 Meets ANSI/BHMA 156.16, L11291 for brass FS496 Meets ANSI/BHMA 156.16, L11301 for brass FS497 Meets ANSI/BHMA 156.16, L11301 for brass Dimensions FS495 Holds door 3-3/4" from wall. FS496 Door to Floor Clearances 3/8" Maximum. FS497 Door to Floor Clearances 1" Maximum. Finishes brass Ives Number US3 US4* US10 US10B US26 US26D BHMA 606 612 613 625 626 605 D E8 Stops F Exterior Hardware G Miscellaneous Hardware Latches, Catches & Bolts * not available on FS496, FS497. E8 USA 1.877.671.7011 Canada 1.905.403.1800 www.ives.ingersollrand.com Wall Stops Flush Bolts & Coordinators C Latches, Catches & Bolts D Stops E9 Exterior Hardware F Miscellaneous Hardware G Dimensions B WS11 is furnished with wood screws for drywall mounting. WS11X is furnished with a threaded stud and expansion shield for masonry type mounting. WS11X Meets ANSI/BHMA 156.16, L12021 Pulls & Plates WS11 Meets ANSI/BHMA 156.16, L12011 A • Constructed in heavy duty cast brass. • Hexagon section on unit aids in fastening unit when expansion shield is used. • Replaceable rubber bumpers features off-set shoulder and threaded shank that screws into body of unit. Hinges & Pivots WS11 WS11X Wall Stops Base Diameter: 2" Overall Projection: 3-3/4" Finishes brass Ives Number US3 US4 US10 US10B US26 US26D BHMA 606 612 613 625 626 605 WS20 WS20X Manual Wall Holders • Constructed in cast brass or aluminum. • Replaceable rubber bumpers feature off-set shoulder and threaded shank that screws into body of holder. • Hinged strike furnished matches body material and finish. WS20 Meets ANSI/BHMA 156.16, L11341for brass and L32341 for aluminum WS20X Meets ANSI/BHMA 156.16, L11351 for brass and L31351 for aluminum WS20 is furnished wood screws for drywall mounting. WS20X is furnished with threaded stud and exspansion shield for masonry type mounting. Dimensions Base Diameter: 2-3/8" Overall Projection: 4" Strike Height: 2" Strike Width: 1" Finishes brass Ives Number US3 US4 US10 US10B US26 US26D BHMA 606 612 613 625 626 605 Finishes aluminum Ives Number US28 BHMA 628 E9 USA 1.877.671.7011 Canada 1.905.403.1800 www.ives.ingersollrand.com B WS33 WS33X Wall Stops Hinges & Pivots C Flush Bolts & Coordinators D Latches, Catches & Bolts Pulls & Plates A Wall Stops • Constructed in a durable cast brass. • Replaceable rubber bumper with offset shoulder screws into cavity on body to prevent loss or theft. • Sloping design discourages vandalism WS33 is furnished with wood screws for drywall mounting. WS33X is furnished with a threaded stud and expansion shield for masonry type mounting. WS33 Meets ANSI/BHMA 156.16, L12011 WS33X Meets ANSI/BHMA 156.16, L12021 Dimensions Base Diameter: 2-1/4" wide x 3" High Overall Projection: 3-3/4" Finishes brass US Number US26D BHMA WS65 626 Wall Stop Stops E10 • Burnished cast aluminum. • Replaceable non-marring white rubber bumper. • Packed with sheet metal screws. Dimensions Base Diameter: 1-5/8" F Exterior Hardware G Miscellaneous Hardware Overall Projection: 3-3/4" Finishes aluminum Ives Number US3 US10 US10B US27 BHMA 668 703 673 666 E10 USA 1.877.671.7011 Canada 1.905.403.1800 www.ives.ingersollrand.com Wall Bumpers Hinges & Pivots A Pulls & Plates B Flush Bolts & Coordinators C Latches, Catches & Bolts D Stops E11 Exterior Hardware F Miscellaneous Hardware G WS401CVX Wall Bumpers WS401CCV WS402CVX WS402CCV • Constructed in heavy-duty cast brass. • Special retainer cup makes rubber tamper resistant. WS401CCV & WS402CCV Meets ANSI/BHMA 156.16 L12251 for brass WS401CVX (401) – convex rubber bumper, packed with wood screw and plastic anchor. WS401CCV (401-1/2) – concave rubber bumper which avoids damage to locks with projecting buttons, packed with wood screw and plastic anchor. WS402CVX (402) – convex rubber bumper packed with screw and drywall anchor. WS402CCV (402-1/2) – concave rubber bumper which avoids damage to locks with projecting buttons and is packed with screw and drywall anchor. WS401CVX & WS402CVX Meets ANSI/BHMA 156.16 L12101 for brass Dimensions Base Diameter: 2-1/2" Base Thickness: 3/8" Overall Projection: 1" Finishes Ives Number US3 US4 US10 US10B US15 US26 US26D BHMA 605 606 612 613 619 625 626 WS404CVX Wall Bumpers • Compact size. • Constructed in cast brass. • Totally concealed mounting discourages vandalism or tampering. • Unit furnished with grey convex rubber bumper. • Packed with sheet metal screw, rawl plug and brad. Dimensions Base Diameter: 1" Overall Projection: 17/32" Finishes Ives Number US3 US4 US5 US10 US10B US15 US26 US26D BHMA 605 606 609 612 613 619 625 626 E11 USA 1.877.671.7011 Canada 1.905.403.1800 www.ives.ingersollrand.com A B Pulls & Plates WS406CVX Wall Bumpers WS406CCV WS407CVX WS407CCV • Constructed in sturdy yet economical wrought base of brass or stainless steel construction. • Feature concealed tamper-proof mounting. • Shipped factory preassembled backplate to reduce installation cost. • Easy installation by inserting screwdriver through small hole in rubber. WS406CVX & WS407CVX Meets ANSI/BHMA 156.16 L22201 for brass, and L52101 for stainless steel. WS406CVX (406) – convex rubber bumper, packed with wood screw and plastic anchor. WS406CCV (406-1/2) – concave rubber bumper, which avoids damage to locks with projecting buttons, packed with wood screw and plastic anchor. WS407CVX (407) – convex rubber bumper packed with screw and drywall anchor. WS407CCV (407-1/2) – concave rubber bumper which avoids damage to locks with projecting buttons and is packed with screw and drywall anchor. WS406CCV & WS407CCV Meets ANSI/BHMA 156.16 L22251 for brass and and L52251 for stainless steel. Flush Bolts & Coordinators C Hinges & Pivots Wall Bumpers Dimensions Base Diameter: 2-1/2" D Latches, Catches & Bolts Base Thickness: 3/8" Overall Projection: 1" Finishes brass Ives Number US3 US4 US5* US10 US10B BHMA 606 609* 612 613 605 US15 US15A** US26 619 620 625 US26D B716** 626 Stops E12 Finishes stainless steel Ives Number US32D BHMA 630 * only available on WS407CVX Slim-Pak of 15 F Exterior Hardware G Miscellaneous Hardware ** available on WS407CCV or WS407CVX Slim-Pak of 15 E12 USA 1.877.671.7011 Canada 1.905.403.1800 www.ives.ingersollrand.com Wall Bumpers C Latches, Catches & Bolts D Stops E13 Exterior Hardware F Miscellaneous Hardware G Overall Projection: 1-1/16" Flush Bolts & Coordinators Base Thickness: 3/8" B Base Diameter: 1-7/8" Pulls & Plates Dimensions A • Adhesive-backed wall door stop for use on clean, smooth, flat surfaces only. • Non-marring white rubber. • Concave design permits knob to strike stop without damaging or engaging lock mechanism. Hinges & Pivots Wall Bumper 411R-W E13 USA 1.877.671.7011 Canada 1.905.403.1800 www.ives.ingersollrand.com WS443 WS447 Wall Stop Hinges & Pivots A Wall Stops & Holders • Constructed in brass. • Ideal for interior or exterior use. • Replaceable non-marring rubber tip. B C Flush Bolts & Coordinators D Dimensions WS443 Meets ANSI/BHMA 156.16, L12021 for brass and L32021 for aluminum. Base Diameter: 2-1/4" Overall Projection: 3-11/16" Finishes brass Ives Number US3 US4 US10 US10B US15 US26 US26D BHMA 606 612 613 619 625 626 605 WS445 WS449 Manual Wall Holder • Constructed in cast of brass or aluminum. • Unit functions as a stop but serves as a Hold-Open device when hook is manually engaged in strike. • Unit requires manual disengagement to release Hold-Open. • Replaceable resilient, non-marring rubber tip. WS445 is packed with expansion shield and lead shield for masonry type mounting. WS449 is packed with wood screws for drywall mounting. WS445 Meets ANSI/BHMA 156.16, L11351 for brass. Stops E14 Latches, Catches & Bolts Pulls & Plates WS443 is packed with expansion shield and lead shield for masonry type mounting. WS447 is packed with wood screws for drywall mounting. WS449 Meets ANSI/BHMA 156.16, L11341 for brass and L31341 for aluminum. Dimensions Base Diameter: 2-1/4" Base Projection: 3-11/16" F G Miscellaneous Hardware Exterior Hardware Engaged Projection: 5-3/4" Strike Height: 1-1/2" Strike Width: 13/16" Strike Projection: 13/16" Finishes brass Ives Number US3 US4 US10 US10B US15 US26 US26D BHMA 606 612 613 619 625 626 605 Finishes aluminum Ives Number US28* BHMA 628 * only available on WS449 E14 USA 1.877.671.7011 Canada 1.905.403.1800 www.ives.ingersollrand.com Automatic Wall Holders WS40 Automatic Wall Holder Hinges & Pivots A Pulls & Plates B Flush Bolts & Coordinators C Latches, Catches & Bolts D Stops E15 Exterior Hardware F Miscellaneous Hardware G • Constructed of sturdy cast brass, or aluminum. • Holder is mounted on wall and strike is mounted on door. • Roller on holder rides up seats itself on strike, with a heavy duty bumper pad deadening the sound and shock. • Universal screw pack accommodates all types wall construction. Dimensions Meets ANSI/BHMA 156.16, L11291 for brass and L31291 for aluminum. Base Height: 2" Base Width: 2-1/2" Base Projection: 2-1/4" Engaged Projection: 3-1/2" Strike Height: 2-1/16" Strike Width: 3/4" Strike Projection: 2" Finishes brass Ives Number US3 US4 US10 US10B US26 US26D BHMA 606 612 613 625 626 605 Finishes aluminum Ives Number US28 BHMA 628 WS45 WS45X Automatic Wall Holder • Constructed of cast brass, bronze or aluminum. • Spring loaded roller rides up the face of the strike, seating itself on the strike, holding the door firmly in the open position. • A heavy rubber pad cushions the shock and absorbs the sound. • With unit mounted on door and the strike on wall, vertical adjustment is available on body. • The strike is adjustable 45 degrees left or right, both adjustments easily accomplished at time of installation or at a later date. WS45 strike is furnished with wood screws for drywall mounting. WS45X strike is furnished with a threaded stud and expansion shield for masonry type mounting. WS45 Meets ANSI/BHMA 156.16, L11291 for brass and L31291 for aluminum. Dimensions Base Height: 3-11/16" Base Width: 3" Base Projection: 2" Engaged Projection: 3-7/16" Strike Diameter: 2-3/8 Strike Projection: 3" Finishes brass Ives Number US3 US4 US10 US10B US26 US26D BHMA 606 612 613 625 626 605 Finishes aluminum Ives Number US28 BHMA 628 E15 USA 1.877.671.7011 Canada 1.905.403.1800 www.ives.ingersollrand.com A Hinges & Pivots B Pulls & Plates Kick Down Holders FS452 Kick Down Holder • • • • Units provide simple hold and release, activated with a touch of the foot. Cast brass or aluminum construction. Stainless steel spring. Replaceable non-marring rubber shoes have corrugated bottoms to provide secure grip. • Shoes are easily replaced when worn. Shoe held on with screw. • Packed with sheet metal screws. FS452-4 has a door-to-floor clearance of 2" or less. FS452-5 has a door-to-floor clearance up to 3". C D Meets ANSI/BHMA 156.16, L11383 for brass and L31383 for aluminum. FS452-4 Door-to-Floor Clearance: 2" or less FS452-5 Door-to-Floor Clearance: Up to 3" FS452-4 Plate Height: 2-1/8" FS452-5 Plate Height: 2-1/8" FS452-4 Plate Width: 1" FS452-5 Plate Width: 1" Finishes brass Ives Number US3 US4 US10 US10B US15 US26 US26D BHMA 606 612 613 619 625 626 605 Finishes aluminum Ives Number US28* Latches, Catches & Bolts Flush Bolts & Coordinators Dimensions BHMA 628 * available in 4" only • Units provide simple hold and release, activated with a touch of the foot. • Cast brass or aluminum construction. • Replaceable non-marring rubber shoes have corrugated bottoms to provide secure grip. When worn, shoes are easily replaced. Shoe held on with screws. • Door-to-floor clearances of 2" or less. Stops E16 FS455 Kick Down Holder Dimensions F G Miscellaneous Hardware Exterior Hardware Door-to-Floor Clearance: 2" or less Plate Height: 1-3/4" Plate Width: 1-3/4" Meets ANSI/BHMA 156.16, L11382 for brass and L31382 for aluminum. Finishes brass Ives Number US3 US4 US5 US10 US10B US15 US26 US26D BHMA 606 609 612 613 619 625 626 605 Finishes aluminum Ives Number US3AL US5AL US10AL US27 BHMA 666 609 668 673 E16 USA 1.877.671.7011 Canada 1.905.403.1800 www.ives.ingersollrand.com Kick Down Holders 691 689 695 622 G 706 Miscellaneous Hardware BHMA F SPBLK Exterior Hardware SP313 Stops SP28 E17 SP10 D SP4 Latches, Catches & Bolts Finishes Ives Number C FS555 Door-to-Floor Clearance: Up to 3" Plate Height: 2-1/4" Plate Width: 1-7/16" Flush Bolts & Coordinators FS555 Meets ANSI/BHMA 156.16, L11391 FS544 Door-to-Floor Clearance: 2" or less Plate Height: 2-1/4" Plate Width: 1-7/16" B Dimensions FS544 Meets ANSI/BHMA 156.16, L11381 Pulls & Plates FS544 for door-to-floor clearances of 2" or less FS555 for door-to-floor clearances up to 3". A • Units provide an economical method to hold open doors. • Cast of durable iron. • Non-marring rubber shoes have corrugated bottoms to provide secure grip. Rubber shoe is securely fastened with screw. When worn, shoes are easily replaced. Hinges & Pivots FS544 FS555 Kick Down Holder E17 USA 1.877.671.7011 Canada 1.905.403.1800 www.ives.ingersollrand.com A Hinges & Pivots B C Plunger Type Door Holder FS1153 • Provides a contemporary yet economical method of positive Hold-Open. • Constructed in sturdy cast aluminum. • Spring operated plunger activates with minimal pressure, releasing instantly with a light tap on the plat-form lever. • Provides a 1-5/8" throw for all types of doors. • Ribbed non-marring rubber shoe is securely fastened to unit with a screw and is easily replaced when worn. Dimensions Meets ANSI/BHMA 156.16, L31401. Flush Bolts & Coordinators Pulls & Plates Plunger Type Door Holders Height: 6-1/4" Width: 1-1/2" Depth: 1-7/16" Finishes Ives Number US28 BHMA 628 Plunger Type Door Holder D Latches, Catches & Bolts FS1154 • Constructed from heavy-duty cast brass or bronze. • Plunger and internal parts are plated steel and provides a 1-1/4" throw for all types of doors. • Plunger is easily activated with minimal pressure, releasing instantly with a light tap on the platform lever. • Round non-marring rubber shoe is securely fastened with a screw in flanged cup to prevent movement or loss. When worn, shoes are easily replaced. F Exterior Hardware G Stops Meets ANSI/BHMA 156.16, L11401. Miscellaneous Hardware E18 Dimensions Height: 5-1/2" Width: 2" Depth: 1-1/4" Finishes Ives Number US3 US4 US10 US10B US26 US26D BHMA 605 606 612 613 625 626 E18 USA 1.877.671.7011 Canada 1.905.403.1800 www.ives.ingersollrand.com Roller Bumpers US10* US10B* US15* US26 US26D BHMA 605 606** 612* 625 626 * only available on RB472 ** only available on RB471 and RB472 613* 619* G US4** Miscellaneous Hardware US3 F Finishes Ives Number Exterior Hardware Meets ANSI/BHMA 156.16, L12192 Stops FS471 E19 RB472 Base Diameter: 2" RB472 Length: 6" D RB471 Base Diameter: 2" RB471 Length: 4-1/2" Latches, Catches & Bolts RB470 Base Size: 1-11/16" x 2-1/4" RB470 Arm Offset: 2-3/4" RB470 Length: 5" C Dimensions Flush Bolts & Coordinators B Offset B Meets ANSI/BHMA 156.16, L12212 Pulls & Plates FS470 A • Constructed in heavy-duty cast brass. • RB470 used where two doors open against each other to prevent damage to the doors or hardware. • RB471 and RB472 are ideal for use in situations where doors meet each other at approximate right angles (back to back). • Replaceable rubber roller available. Hinges & Pivots RB470 RB471 RB472 Roller Bumpers FS472 Meets ANSI/BHMA 156.16, L12202 E19 USA 1.877.671.7011 Canada 1.905.403.1800 www.ives.ingersollrand.com 060 061 Hinges & Pivots A Residential Door Stops Flexible Door Stops • Utilizes heavy gauge spring to maintain rigid protections • Simple to install - only a screwdriver required • Made from burnished wrought steel • Packed disassembled for quick installation Replaceable white rubber tip available Meets ANSI/BHMA A156.16 B C Flush Bolts & Coordinators Base Diameter: 1" Tip Diameter: 19/16" 060 3" Projection 061 4" Projection Finishes steel Ives Finish F3 F5 F10 F10B F14 F15* F26D BHMA 638 639 640 645 646 652 632 F-W** * only available on 060 ** only available on 061 60 61 Latches, Catches & Bolts D Pulls & Plates Dimensions Base Door Stops • Available in three sizes to accommodate varying areas of installation and door trim dimensions • Made from solid brass or aluminum • 61 also available in epoxy colored aluminum Replaceable white rubber tip available F 60 3-3/4" Projection, Base Diameter: 1" 61 3-1/8" Projection on brass units, 3-3/16" Projection on aluminum units, Base Diameter: 7/8" Tip Diameter: 5/8" Stops Exterior Hardware E20 Dimensions Finishes brass Ives Finish B3 B4 B5 B10 B10B B15 B15A* B26 B26D BHMA 605 606 609 612 613 619 620 625 626 Finishes aluminum Ives Finish A3 A5* A10* A10B A14 A15* A19* A92 A716* 668 703 669 670 A19 673 BHMA 666 G Miscellaneous Hardware Finishes zinc Ives Finish Z605* BHMA Z619* B716** A-BLK A-W* Z716* * only available on 61 ** only available on 61 Schlage Carded or slim package of 15 E20 USA 1.877.671.7011 Canada 1.905.403.1800 www.ives.ingersollrand.com Residential Door Stops Pulls & Plates B Flush Bolts & Coordinators C Latches, Catches & Bolts D Stops E21 Exterior Hardware F Miscellaneous Hardware G Utilizes heavy gauge spring to maintain rigid protections Simple to install - only a screwdriver required Made from burnished wrought steel Packed disassembled for quick installation A • • • • Hinges & Pivots Flexible Door Stops 63 Replaceable white rubber tip available Dimensions Base Diameter: 1" Tip Diameter: 9/16" Projection: 3" Finishes steel Ives Finish F605E BHMA 64 632 F609E F619E 638 646 F716 F-W Base Door Stop • Base Door Stop features deluxe one-piece styling • Easily screws into base • Designed with square head to accommodate wrench or pliers when installing • Made from solid brass or aluminum Replaceable white rubber tip available Dimensions Base Diameter: 1" Tip Diameter: 9/16" Projection: 3-1/4" Finishes brass Ives Finish B3 B4 B5 B10 B10B B15 B26 B26D BHMA 606 609 612 613 619 625 626 A10B A92 703 673 605 Finishes aluminum Ives Finish A3 BHMA 69 666 Hinge Pin Door Stops • For use on hinged doors where the installation of a standard door stop is not desirable • Positive slip proof adjustment • Non-marring rubber tips • Removable bushings accommodate 1/4" to 5/16" diameter hinge pins • Easy installation—only a screwdriver required • Made from burnished wrought steel Replaceable white rubber tip available Door Opening 70° to 100° Door Opening Adjustments Finishes steel Ives Finish F3 F5 F10 F10B F14 F15 F15A F26 F26D BHMA 638 639 640 645 646 647 651 652 632 E21 USA 1.877.671.7011 Canada 1.905.403.1800 www.ives.ingersollrand.com Residential Door Stops Door Opening Pulls & Plates Flush Bolts & Coordinators C 85° to 125° Door Opening Adjustments Finishes brass Ives Finish B3 B4 B5 B10 B10B B15 B15A* B19 B26 B26D BHMA 606 609 612 613 619 620 622 625 626 Finishes aluminum Ives Finish A3 A4 A5 A10 A10B A14 A15 A92 A716 A-W BHMA 667 668 716 669 670 673 605 666 Finishes zinc Ives Finish Z605E Z406E** Z619E** Z716E B716* A-BLK * only available in Schlage Carded or Slim-Pak of 25 ** only available in Schlage Carded BHMA 72 Hinge Pin Door Stops • For use on hinged doors where the installation of a standard door stop is not desirable • Designed for narrow trim installation • High quality rubber bumpers - shoulder on stud supports rubber through entire body for engineered cushioning • Removable bushings accommodate 1/4" to 5/16" diameter hinge pins • Easy installation • Made from solid brass, aluminum, or epoxy coated aluminum Latches, Catches & Bolts B 70-Zinc D Hinge Pin Door Stops • For use on hinged doors where the installation of a standard door stop is not desirable • Designed for narrow trim installation • High quality rubber bumpers - shoulder on stud supports rubber through entire body for engineered cushioning • Removable bushings accommodate 1/4" to 5/16" diameter hinge pins • Easy installation • Made from solid brass, aluminum, or epoxy coated aluminum Replaceable white rubber tip available Hinges & Pivots A 70 Door Saver Door Opening Finishes zinc Ives Finish Z605E Stops E22 85° to 125° Door Opening Adjustments Z609E Z613E Z619E Z625E Z-W BHMA G Door Saver Meets ANSI/BHMA 156.6, L12141 for brass or bronze and L32141 for aluminum. Hinge Pin Door Stops • For use on hinged doors where the installation of a standard door stop is not desirable • Designed for narrow trim installation • High quality rubber bumpers - shoulder on stud supports rubber through entire body for engineered cushioning • Removable bushings accommodate 1/4" to 5/16" diameter hinge pins • Easy installation • Made from solid brass, aluminum, or epoxy coated aluminum Exterior Hardware Miscellaneous Hardware F 73 Door Opening 85° to 125° Door Opening Adjustments Finishes zinc Ives Finish Z605E Z613E Z619E Z625E BHMA E22 USA 1.877.671.7011 Canada 1.905.403.1800 www.ives.ingersollrand.com Door Silencers C Latches, Catches & Bolts D Stops E23 Exterior Hardware F Miscellaneous Hardware G Diameter: 1/2" Flush Bolts & Coordinators Dimensions B Meets ANSI/BHMA 156.16, L03011. Pulls & Plates Packed in bags of 100. Grey Available in bulk pack of 2500. Each bag has an installation tool included. A Door Silencer • For use on metal frames featuring pneumatic design that, once installed, forms an air pocket to absorb shock and reduce noise of door closing. • Tamper-proof once installed on the frame. • Proper installation also eliminates door rattle and provides constant tension for door latches or locks. Hinges & Pivots SR64 Thickness: 1/8" Finishes GRY, TAN SR65 Door Silencer • For use on wood frames, also feature pneumatic design to cushion shock and absorb noise. • To prevent removal, a small brad should be driven into stop strip and through stem of silencer, as shown in the detail. Packed in bags of 100. Dimensions Meets ANSI/BHMA 156.16, L03021 Height: 3/4" Diameter: 3/8" Thickness: 1/8" Finishes GRY SR66 Door Silencer • Self Adhesive Rubber Silencers. • Economical installation requires no drilling of frames. Packed two sheets of 50 (100 minimum). Dimensions Diameter: 1/2" Thickness: 1/8" Finishes BRN, GRY, WHT E23 USA 1.877.671.7011 Canada 1.905.403.1800 www.ives.ingersollrand.com E24 Stops F Exterior Hardware G Miscellaneous Hardware D Latches, Catches & Bolts C Flush Bolts & Coordinators B Pulls & Plates A Hinges & Pivots Notes E24 USA 1.877.671.7011 Canada 1.905.403.1800 www.ives.ingersollrand.com Exterior Hardware Hinges & Pivots A Pulls & Plates B Flush Bolts & Coordinators C Latches, Catches & Bolts D Stops E Exterior Hardware F1 Miscellaneous Hardware G Table Of Contents Lock Guards page LG1, LG7 Lock Guard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .F2 LG10 Lock Guard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .F2 LG11 Lock Guard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .F3 LG12 Lock Guard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .F3 LG13 Lock Guard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .F4 LG14 Lock Guard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .F4 Viewers U696 One-way Viewer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .F5 698, U698 One-way Viewer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .F5 700, U700 One-way Viewer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .F6 701, U701 One-way Viewer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .F6 Door Knockers 3107 Door Knocker . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .F7 3125 Door Knocker . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .F7 Letter Box 620 Letter Box Plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .F8 601 Letter Box Sleeve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .F8 Door Numbers 02-30 Door Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .F9 Storm and Screen Door 980 Storm Door Latch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .F9 25 Screen Door Pull . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .F10 Crash Stop CS115 Crash Stop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .F10 F1 USA 1.877.671.7011 Canada 1.905.403.1800 www.ives.ingersollrand.com A Hinges & Pivots B C D LG1 LG7 Finishes Ives Number BHMA US2G* US4* US10* 600 603 606 612 US32D SP313* 630 695 * not available on LP7 Lock Guard • Ideally suited for use with rose or escutcheon 2-3/4" wide or less. • For use with Type 86 Mortise and Type 161 Cylindrical Locks (ANSI 156.13 Series 1000 and ANSI 156.2 Series 4000). • No exposed fasteners on face of unit. • Unique design provides maximum security, virtually eliminating the opening between door and frame at the latch point. • Available in 13 Gauge Stainless Steel or 12 Gauge Steel. Stops Exterior Hardware E USP* Dimensions 2-1/2" Wide x 9-1/2" High Stud center to center: 8-1/2" Finishes Ives Number USP US32D BHMA 600 630 Miscellaneous Hardware F2 • Units are non-handed and incorporate security frame pin to prevent separation of the door and frame. LG7 does not incorporate the security frame pin • Unit covers the latch bolt area of the door and lock, thereby providing added protection from burglars, vandals or normal abuse. • Ideal for use with mortise or cylindrical locks. • Easy installation. • Through bolted with carriage bolts and nuts. • Available in a variety of materials, 13 gauge stainless steel, 12 gauge steel and brass material. Dimensions 3" Wide x 11-1/2" High Bolt center to center: 10-1/2" LG10 G Lock Guard Latches, Catches & Bolts Flush Bolts & Coordinators Pulls & Plates Lock Guards F2 USA 1.877.671.7011 Canada 1.905.403.1800 www.ives.ingersollrand.com Lock Guards F3 Miscellaneous Hardware G • Narrow design unit for use on rose or escutcheon 3-1/2" or less. • For use with Type 86 Mortise and Type 161 Cylinder Locks (ANSI 156.13 Series 1000 and ANSI 156.2 Series 4000). • No exposed fasteners on face of unit. • Unique design provides maximum security, virtually eliminating the opening between door and frame at the latch point. • Available in 13 Gauge Stainless Steel or 12 Gauge Steel Exterior Hardware Lock Guard E LG12 Stops 695 D 630 Latches, Catches & Bolts BHMA C US32D SP313 Flush Bolts & Coordinators Finishes Ives Number B Dimensions 2-1/2" Wide x 9-1/2" High Stud center to center: 8-1/2" Pulls & Plates • Designed for use on aluminum doors with latch-type locks or doors equipped with electric strikes. • Unit is Handed - Specify left or right hand when ordering. • No exposed fasteners on face of unit. • Unique design provides maximum security, virtually eliminating the opening between door and frame at latch point. • Available in 13 Gauge Stainless Steel or 12 Gauge Steel. A Lock Guard Hinges & Pivots LG11 Dimensions 1-1/2" Wide x 9-1/2" High Stud center to center: 8-1/2” Finishes Ives Number USP US32D BHMA 600 630 F3 USA 1.877.671.7011 Canada 1.905.403.1800 www.ives.ingersollrand.com A B C Flush Bolts & Coordinators D Latches, Catches & Bolts Pulls & Plates Hinges & Pivots Lock Guards LG13 Lock Guard • Designed for use on all Type 161 Cylindrical Locks (ANSI 156.2 Series 2000) Monolock and Unilock. • No exposed fasteners on face of unit. • Unique design provides maximum security, virtually eliminating the opening between door and frame at latch point. • Available in 13 Gauge Stainless Steel or 12 Gauge Steel. Dimensions 1-1/2" Wide x 7" High Stud center to center: 4-1/2" Finishes Ives Number USP US32D BHMA 600 630 LG14 Lock Guard • • • • • Narrow design unit for use on rose or escutcheon 3-1/2" or less. For use with Von Duprin 6210 and 6211 electric strike. No exposed fasteners on face of unit. Unique design provides maximum security. Available in 13 Gauge Stainless Steel E Stops Dimensions 2-9/16" Wide x 9-1/2" High Stud center to center: 8-1/2" Finishes Ives Number F4 Exterior Hardware G Miscellaneous Hardware BHMA US32D 630 F4 USA 1.877.671.7011 Canada 1.905.403.1800 www.ives.ingersollrand.com Viewers • • • • • • • 698 meets ANSI/BHMA A156.16 L23172 U698 meets ANSI/BHMA A156.16 L23222 U698 is UL Listed 90 minute fire doors 190° Angle of View. Lens projects 1/4" from face of door. 4 optical glass lenses. For doors 1-3/8" to 2-1/8" thick. Solid brass body and barrel. Simple installation — only a 9/16" hole required. Suggested installation height: 60" from floor. Finishes Ives Number B3 B15** B26D BHMA 605 619 626 B716* G One-Way Wide Angle Viewer Miscellaneous Hardware 698 U698 F5 626 Exterior Hardware 613 E 606 Stops BHMA D B26D Latches, Catches & Bolts B10B C B4 Flush Bolts & Coordinators Finishes Ives Number B Meets ANSI/BHMA A156.16 L23222 UL Listed 90 minute fire doors 150° Angle of View. For doors 1-3/8" to 2-1/16" thick. Secure, tamper-resistant. Solid brass body; glass lens. Simple installation — only a 1/2" hole required. Suggested installation height: 60" from floor. Trim washer available, 3/4" x .032" thick. Pulls & Plates • • • • • • • A One-Way Viewer Hinges & Pivots U696 * not available on U698 ** only available in Schlage Carded F5 USA 1.877.671.7011 Canada 1.905.403.1800 www.ives.ingersollrand.com A Hinges & Pivots B C Flush Bolts & Coordinators D Latches, Catches & Bolts E F6 Exterior Hardware G Miscellaneous Hardware Stops Pulls & Plates Viewers 700 U700 One-Way Viewer • • • • • • • 700 meets ANSI/BHMA A156.16 L23173 U700 meets ANSI/BHMA A156.16 L23222 U700 is UL Listed 90 minute fire doors 120° Angle of View. For doors 1-3/8" to 2-1/16" thick. Secure, tamper-resistant. Solid brass body; glass lens. Simple installation—only a 1/2" hole required. Suggested installation height: 60" from floor. Trim washer available, 3/4" x .032" thick. Finishes Ives Number B3** B4 B10B* B26D BHMA 605 606 613 626 * not available on U700 ** only available on 700 in Schlage Carded 701 U701 One-Way Viewer • • • • • • • 701 meets ANSI/BHMA A156.16 L23173 U701 meets ANSI/BHMA A156.16 L23222 U701 is UL Listed 90 minute fire doors. 120° Angle of View. For doors 2-1/8" to 2-5/8" thick. Secure, tamper-resistant. Solid brass body; glass lens. Simple installation—only a 1/2" hole required. Suggested installation height: 60" from floor. Trim washer available, 3/4" x .032" thick. Finishes Ives Number B4 B10B B26D BHMA 606 613 626 F6 USA 1.877.671.7011 Canada 1.905.403.1800 www.ives.ingersollrand.com Door Knockers Miscellaneous Hardware G Dimensions Length: 5-15/16" Width: 3" Projection: 1-1/16" Mounting Hole Center-to-Center: 3-15/16" F7 • Knocker made from forged brass. • 02-31251 and 02-31251U for door thickness 7/8" – 1-9/16" • 02-31252 and 02-31252U for door thickness 1-5/8" – 2-1/8" Exterior Hardware 02-3125 Knocker Only 02-31251U Knocker with U700 Viewer 02-31252U Knocker with U701 Viewer E 619 Stops 605 D BHMA Latches, Catches & Bolts B19 C B605 Flush Bolts & Coordinators Finishes Ives Number B Meets ANSI/BHMA A156.16 L23151 Pulls & Plates Dimensions Length: 8-1/2" Width: 4-1/8" Projection: 1" Mounting Hole Center-to-Center: 5" A • Knocker made from forged brass. • Only available in Schlage Carded pak Hinges & Pivots 02-3107 Knocker Only Meets ANSI/BHMA A156.16 L23161 Finishes Ives Number B3 B5 B15 B15A* B26 B26D BHMA 605 609 619 620 625 626 716 * not available on viewer, only available in Schlage Carded Only B3, B15, B26D and 716 knockers are available with viewer. B3 is furnished with B4 (606) viewer, 716 is furnished with B10B viewer, B15 (619) is furnished with a 636 viewer. F7 USA 1.877.671.7011 Canada 1.905.403.1800 www.ives.ingersollrand.com Pulls & Plates A B C Flush Bolts & Coordinators Latches, Catches & Bolts E Stops F8 Exterior Hardware G Miscellaneous Hardware D Hinges & Pivots Door Knockers 620 Magazine Size Letter Box Plate with Standard (Open) Back Plate • Spring-loaded front plate • Sex Bolt mounting available, order separately 09-355 – finish. Dimensions Overall Size: 13" Wide x 3-9/16" High Plate Opening: 11" x 2" High Meets ANSI/BHMA A156.16 L26031 Finishes brass Ives Number B3 B5 B15 B15A* B26 B26D BHMA 609 619 620 625 626 605 B716 Finishes aluminum Ives Number PA28 BHMA 628 * not available in U700 Schlage Carded 601 Sleeve for use with Letter Box Plate • Made of stainless steel. • For 1-3/4" hollow core doors. F8 USA 1.877.671.7011 Canada 1.905.403.1800 www.ives.ingersollrand.com House Numbers B Flush Bolts & Coordinators C Latches, Catches & Bolts D Stops E Exterior Hardware F9 Miscellaneous Hardware G 5 - 3056 6 - 3066 7 - 3076 8 - 3086 9 - 3096 0 - 3006 1 - 3016 2 - 3026 3 - 3036 4 - 3046 Pulls & Plates Schlage Carded A • Made from solid brass. Hinges & Pivots SC2 - 30 X 6 Heritage House Number Dimensions Height: 4" Finishes brass Ives Number B3 B15 BHMA 619 980 605 B716 Storm Door Latch • • • • For wood storm doors 7/8" to 1-1/8" thick. Reversible: fits right or left hand, inswinging or outswinging doors. Security lock feature operates from inside rose. Solid brass safety strike assures latching and is designed to compensate for air pressure build-up between doors. • Made from wrought brass. Dimensions Backset: 1-3/4" Rose Diameter: 1-7/8" Knob Diameter: 1-3/4" Knob Projection: 2" Lever Length: 1-3/4" Lever Projection: 1-7/8" Finishes brass Ives Number B3 B5 B10B B15 B19 B26 B26D BHMA 609 613 619 622 625 626 605 F9 USA 1.877.671.7011 Canada 1.905.403.1800 www.ives.ingersollrand.com A Hinges & Pivots Crash Stops 25 Screen Door Pull • Cast aluminum or epoxy-coated alumimum • Also used as a window lift, drawer or utility pull Dimensions B C Meets ANSI/BHMA A156.16, L12231, Projection 1-5/32" Mounting holes 4-1/8" center to center Flush Bolts & Coordinators Latches, Catches & Bolts D Pulls & Plates Length 4-7/8" Finishes Ives Number A3 A92 BHMA 666 673 A-W A-B CS115 Crash Stop • Specially designed for full-size exterior doors. • Tear resistant, grey vinyl cover. • Heavy duty compression spring assembled to both ends of chain and end brackets. • Packed with sheet metal screws. • Cast Brass brackets with solid, welded steel chain. • Optional sex bolt mounting available in US26D (626) only. Meets ANSI/BHMA A156.16, L12231, Dimensions E Stops Bracket Size: 1-9/16" x 1-9/16" Available Lengths: 20-1/2" — Recommended for 30" Door Width (Product No. CS115-20) 25-1/2" — Recommended for 36" Door Width (Product No. CS115-25) F10 Exterior Hardware G Miscellaneous Hardware 30-1/2" — Recommended for 42" Door Width (Product No. CS115-30) Finishes Ives Number BHMA US10B US26D 613 626 F10 USA 1.877.671.7011 Canada 1.905.403.1800 www.ives.ingersollrand.com Miscellaneous Door Hardware Flush Bolts & Coordinators C Latches, Catches & Bolts D Stops E Exterior Hardware F Miscellaneous Hardware G1 Cabinet/Closet Hardware 2 Elbow Catch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .G13 22 Flush Pull . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .G13 218 Finger Pull . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .G13 221 Flush Pull . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .G14 222 Flush Pull . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .G14 223 Flush Pull . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .G14 227 Flush Pull . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .G15 230 Slide Door Edge Pull . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .G15 42 Pocket Sliding Door Bolt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .G15 990 Sliding Door Pull . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .G16 991 Sliding Door Pull . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .G16 B Hobby Hardware 78 Hook and Staple . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .G9 86 Hobbyist Barrel Bolt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .G9 9011, 9031 Middle Butt Hinge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .G9 9041 Middle Butt Hinge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .G9 9042 Broad Butt Hinge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .G9 9070 Decorative Hinge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .G10 9071, 9072 Decorative Hinge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .G10 9110 Decorative Hasp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .G10 9120 Hasp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .G10 9130 Hook with Hasp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .G11 9210 Support Hinge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .G11 9220 Friction Lid Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .G11 9311, 9212 Decorative Corner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .G11 9320 Bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .G12 9321 Bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .G12 9330 Draw Catch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .G12 9340 Chest Handle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .G12 Pulls & Plates Window Hardware 07 Window Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .G6 90 Side Window Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .G7 026 Bar Window Lift . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .G7 066 Casement Fastener . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .G7 66 Casement Fastener . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .G8 71 Casement Adjuster . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .G8 A page Hooks & Brackets 059 Handrail Bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .G2 59 Handrail Bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .G2 159 Handrail Bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .G2 405 Coat & Hat Hook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .G3 571 Coat & Hat Hook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .G3 572 Coat & Hat Hook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .G3 574 Coat & Hat Hook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .G4 575 Coat & Hat Hook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .G4 580 Ceiling Hook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .G4 581 Wardrobe Hook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .G5 582 Wardrobe Hook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .G5 585 Closet Pole Socket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .G6 586 Closet Pole Socket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .G6 Hinges & Pivots Table Of Contents G1 USA 1.877.671.7011 Canada 1.905.403.1800 www.ives.ingersollrand.com Hand Rail Brackets and Hooks A Hand Rail Bracket Hinges & Pivots 059 • Made from solid brass, cast aluminum or epoxy-coated aluminum. • Large faceplate for secure attachment to wall. • Features solid construction for increased strength. Dimensions B C Flush Bolts & Coordinators Latches, Catches & Bolts D Meets ANSI/BHMA A156.16 L13061 for brass and L33061 for aluminum Finishes brass Ives Number B3 B5 B10B B15 B15A B19 B26 B26D BHMA 605 609 613 619 620 622 625 626 Finishes aluminum Ives Number A3 A5 A10 A10B A14 A15 A92 A716 A-BLK 668 703 669 670 673 BHMA 666 59 Hand Rail Bracket Dimensions Meets ANSI/BHMA A156.16 L13061 for brass and L33061 for aluminum Exterior Hardware F G2 A-W • Made from cast brass or cast aluminum. • Large faceplate for secure attachment to wall. • Features solid construction for increased strength. Aluminum Base: 2-13/16" High x 1-1/2" Wide Brass Base: 2-15/16" High x 1-1/2" Wide Base to Center of Rail: 2-3/4" Finishes brass Ives Number B3 B5 B15 B26 B26D BHMA 605 609 619 625 626 Finishes aluminum Ives Number A3 A5 A10B A14 A15 A92 703 669 670 673 BHMA Miscellaneous Hardware B716 Finishes zinc Ives Number Z619E Stops E Pulls & Plates Base: 2-1/4" High x 1-3/8" Wide Base to Center of Rail: 2-7/16" 159 666 B716 A716 Hand Rail Bracket • • • • For use on commercial applications. Exceeds OSHA and BHMA strength test requirements. Packed with square head iron lag screw, expansion shield and screws. Cast Aluminum construction. Dimensions Base Diameter: 3-1/8" Base to Rail Center: 3-1/8" Meets ANSI/BHMA A156.16, L33081 Finishes aluminum Ives Number A3 A92 BHMA 673 666 G2 USA 1.877.671.7011 Canada 1.905.403.1800 www.ives.ingersollrand.com Hooks A Pulls & Plates B Flush Bolts & Coordinators C Latches, Catches & Bolts D Stops E Exterior Hardware F Miscellaneous Hardware G3 Coat & Hat Hook • Wide body design is ideal for public buildings, schools, dormitories, etc., where hook must withstand unusual stress and strain. • Made from cast aluminum. Hinges & Pivots 405 Dimensions Base: 1-1/2" High x 7/8" Wide Projection: 2-1/2" Meets ANSI/BHMA A156.16 L33113 Finishes aluminum Ives Number A3 A4 BHMA 667 571 666 A5 A10 A10B A14 A92 668 703 669 673 Coat & Hat Hook • All-purpose hook in traditional design. • Made from cast brass, cast aluminum, or epoxy-coated aluminum. Dimensions Base: 1-3/4" High x 1-1/4" Wide Projection: 3" Meets ANSI/BHMA A156.16 L13113 for brass and L33113 for aluminum. Finishes brass Ives Number B3 B4 B5 B10B B15 B15A* B26 B26D BHMA 605 606 609 613 619 620 625 626 Finishes aluminum Ives Number A3 A5 A10 A14 A15 A92 A716 A-W 668 669 670 673 BHMA Finishes zinc 666 Ives Number Z619E B716 A-BLK BHMA * only available in Schlage Carded or Slim-Pak of 25 572 Coat & Hat Hook • Step-up decorative version of the traditional all-purpose hook. • Ideal for locations where additional strength is required. • Made from cast brass or cast aluminum. Dimensions Brass Base: 1-1/2" High x 1-5/16" Wide Aluminum Base: 1-5/8" High x 1-5/16" Wide Projection: 3" Finishes brass Ives Number B3 B4 B5 B10 B10B B15 B26 B26D BHMA 605 606 609 612 613 619 625 626 Finishes aluminum Ives Number A3 A5 A10 A10B A14 A15 A92 668 703 669 670 673 BHMA USA 1.877.671.7011 Canada 1.905.403.1800 666 www.ives.ingersollrand.com G3 B Hinges & Pivots 574 Dimensions Base: 1-5/8" High x 1-3/4" Wide Projection: 3-3/4" Overall Height, Brass: 4-3/4" Overall Height, Aluminum: 5" C E B4 B10 B10B B15 B26 B26D BHMA 605 606 612 613 619 625 626 Finishes aluminum Ives Number A3 A26 A92 BHMA 672 673 F Exterior Hardware Coat & Hat Hook Dimensions Base: 2-1/4" High x 1-3/8" Wide Projection: 3-5/8" Overall Height: 5-3/4" Finishes aluminum Ives Number A3 BHMA 580 G4 666 • Especially designed to accommodate large hats. • Made from solid brass or cast aluminum. Meets ANSI/BHMA A156.16 L33121 Stops Finishes brass Ives Number B3 575 Latches, Catches & Bolts D Flush Bolts & Coordinators Meets ANSI/BHMA A156.16 L13113 for brass and L33113 for aluminum Miscellaneous Hardware Coat & Hat Hook • Decorative design is ideal for commercial and residential installations. • Made from cast brass, cast aluminum or epoxy-coated aluminum. Pulls & Plates A Hooks A10B A92 703 673 666 Ceiling Hook • Ideal for use in closets, attached to underside of shelves, or in storage lockers. • Made from cast brass or cast aluminum. Dimensions Base: 1" High x 1-7/8" Wide Projection: 2-1/4" Finishes Ives Number A3 BHMA 666 A5 A10 A14 A15 A92 668 669 670 673 A716 G4 USA 1.877.671.7011 Canada 1.905.403.1800 www.ives.ingersollrand.com Hooks Pulls & Plates B Flush Bolts & Coordinators C Latches, Catches & Bolts D Stops E Exterior Hardware F Miscellaneous Hardware G5 • Compact hook is perfect where space is limited, such as behind doors where low profile is needed. • Made from cast brass, cast aluminum or epoxy-coated aluminum. A Wardrobe Hook Hinges & Pivots 581 Dimensions Base, Brass/Aluminum: 1-1/4" High x 1-1/4" Wide Base, Zinc: 1-1/2" High x 3/4" Wide Projection, Brass: 1-11/16" Projection, Aluminum, Zinc: 1-5/8" Finishes brass Ives Number B3 B4 B5 B10 B10B B15 B15A* B26 B26D BHMA 605 606 609 * only available in Schlage Carded 612 613 619 620 625 626 A14 A15 A92 A716 A-BLK A-W 669 670 673 Finishes aluminum Ives Number A3 BHMA A5 666 B716 Finishes zinc (narrow base) Ives Number Z619E BHMA 582 Double Wardrobe Hook • Compact double hook is perfect where space is limited, such as behind doors where low profile is needed. • Made from cast brass, cast aluminum or epoxy-coated aluminum. Dimensions Base, Brass: 1-1/8" High x 1-1/4" Wide Base, Aluminum: 1-1/16" Hgh x 1-3/16 Wide Base, Zinc: 1-5/8" High x 7/8" Wide Projection, Brass: 1" Projection, Aluminum, Zinc: 1-3/32" Finishes brass Ives Number B3 B4 B5 B10 B10B B15 B15A* B26 B26D BHMA 605 606 609 612 613 619 620 625 626 Finishes aluminum Ives Number A3 A5 A10 A14 A15 A92 A716 A-W A-BLK 668 669 670 673 BHMA 666 Finishes zinc (narrow base) Ives Number Z619E BHMA * only available in Schlage Carded or Slim-Pak of 25 B716 G5 USA 1.877.671.7011 Canada 1.905.403.1800 www.ives.ingersollrand.com A B Pulls & Plates • • • • Flush Bolts & Coordinators C SP585 Closet Pole Sockets Finishes Ives Number F3 BHMA 632 • • • • White Plastic E Stops Exterior Hardware F Window Lock • Designed low to the sash for superior strength and greater resistance to breakage. • Vertical and horizontal camming action for snug, non-rattling fit. • Heavy gauge springs provide long-wearing action. • Made from solid brass, aluminum, or epoxy coated aluminum. Dimensions Meets ANSI/BHMA A156.16 G6 Made from a heavy duty plastic for long life and extra strength. Single screw mounting. Accommodates pole or pipe with outside diameter of 1-3/8". Packed in pairs. Finish 07 Miscellaneous Hardware Flange design prevents accidental knock out of pole. Made from wrought steel. Accommodates pole or pipe with outside diameter of 1-3/8". Packed in pairs. SP586 Closet Pole Sockets Latches, Catches & Bolts D Hinges & Pivots Window Hardware Base: 15/16" x 2-9/16" Strike: 5/8" x 2-9/16" Finishes brass Ives Number B3 B15 B15A* B26 B26D BHMA 605 619 620 625 626 Finishes aluminum Ives Number A3 A5* A10B A14 A15 A92 703 669 670 673 BHMA 666 B716 A-716 A-W A-BLK * only available in Schlage Carded or Slim-Pak of 25 G6 USA 1.877.671.7011 Canada 1.905.403.1800 www.ives.ingersollrand.com Window Hardare Pulls & Plates B Flush Bolts & Coordinators C Latches, Catches & Bolts D Stops E Exterior Hardware F Miscellaneous Hardware G7 • May be used singularly for small windows or in pairs for large windows. • Cam action eliminates rattles and holds window firmly in desired position. • Made from aluminum. A Side Window Lock Hinges & Pivots 90 Dimensions 1-3/4" High x 1-1/8" Wide Meets ANSI/BHMA A156.16 Finishes Ives Number A3 BHMA 666 026 Bar Window Lift • Facilitates opening of window in a safe manner. • Can also be used as a drawer or utility pull. • Made from solid brass, aluminum, or epoxy coated aluminum. Meets ANSI/BHMA A156.16 Dimensions Base: 1-1/8" High x 4" Wide Projection: 1-1/16" Finishes brass Ives Number B3 B5 B15 B15A* B26 B26D BHMA 605 609 619 620 625 626 Finishes aluminum Ives Number A3 A5 A14 A15 A92 A716 B716 A-W A-BLK BHMA 666 669 670 673 * only available in Schlage Carded or Slim-Pak of 25 066 Casement Fastener • • • • For use on windows to provide weather-tight fastening and security. Also ideal for securing louvered doors and small doors. Made from solid brass or aluminum. Specify: Surface , Rim , or Mortise Strike (SS) Strike (RS) Strike (MS) Meets ANSI/BHMA A156.16 Dimensions Base: 1-5/8" x 7/8" Projection: 1-3/8" Finishes brass Ives Number B3 B5 B15 B26 B26D BHMA 605 609 619 625 626 Finishes aluminum Ives Number A3 A5 A10B A14 A92 BHMA 668 703 673 666 G7 USA 1.877.671.7011 Canada 1.905.403.1800 www.ives.ingersollrand.com Pulls & Plates A B C Flush Bolts & Coordinators 66 Casement Fastener • • • • Meets ANSI/BHMA A156.16 Base: 2-1/16" High x 1-1/16" Wide Projection: 1-7/8" Finishes brass Ives Number B3 B5 B15 B26 B26D BHMA 605 609 619 625 626 Finishes aluminum Ives Number A3 A5 A14 A92 669 673 BHMA 666 71 E B716 Casement Adjuster • Securely holds casement window in any position. • Can also be used to hold cabinet lids and drafting table tops in various positions. • Made from burnished steel or solid brass. • Available in 10" and 12" lengths. Meets ANSI/BHMA A156.16 Stops For use on windows to provide weather-tight fastening and security. Also ideal for securing louvered doors and small doors. Made from solid brass or aluminum. Specify: Surface , Rim Mortise Strike (SS) Strike (RS) Strike (MS) Dimensions Latches, Catches & Bolts D Hinges & Pivots Window Hardware Dimensions Tube: 3/8" x 5/8" Projection: 1" Sash Plate: Brass: 1-5/8" High x 5/8" Wide Steel: 2 x 5/8" Wide F G8 2-1/4" x 15/16" Wide Finishes brass Ives Number B3 B26 BHMA 625 605 Miscellaneous Hardware Exterior Hardware Sill Plate: G8 USA 1.877.671.7011 Canada 1.905.403.1800 www.ives.ingersollrand.com Hobby Hardware 78 Hook and Staple Stops E Exterior Hardware F Miscellaneous Hardware G9 Hobbyist Barrel Bolt • Made from solid brass. D 86 Latches, Catches & Bolts 605 C BHMA Flush Bolts & Coordinators B3 B Finishes Ives Number Pulls & Plates Hook: 1-1/2” Long Staple: 3/4” high x 15/16” wide A Dimensions Hinges & Pivots • Made from solid brass. Dimensions Bolt plate: 1-9/16” high x 1-11/16” wide Bolt guide: 1-9/16” high x 7/16” wide Strike plate: 1-9/16” high x 5/8” wide Finishes Ives Number B3 BHMA 603 9011 9031 Middle Butt Hinge Middle Butt Hinge • Made from solid brass. Dimensions 9011 Overall height x overall width: 3/4” x 11/16” 9031 Overall height x overall width: 1-1/2” x 1” Finishes Ives Number B3 BHMA 605 Schlage Carded - 9011 4 per, 5 cards per box. 9031 2 per, 5 cards per box. 9041 Middle Butt Hinge • Made from solid brass. Dimensions Overall height x overall width: 2” x 1-1/4” Finishes Ives Number B3 BHMA 605 Schlage Carded - 2 per, 5 cards per box. 9042 Broad Butt Hinge • Made from solid brass. Dimensions Overall height x overall width: 2” x 1-3/8” Finishes Ives Number B3 B5 BHMA 605 609 Schlage Carded - 2 per, 5 cards per box. G9 USA 1.877.671.7011 Canada 1.905.403.1800 www.ives.ingersollrand.com A Hinges & Pivots Hobby Hardware 9070 Decorative Hinge • Made from steel. Dimensions B C Flush Bolts & Coordinators Latches, Catches & Bolts D Pulls & Plates Overall height x overall width: 1-5/16” x 2-7/8” Finishes Ives Number F3 BHMA 632 Schlage Carded - 2 per, 5 cards per box. 9071 9072 Decorative Hinge Decorative Hinge • Made from solid brass. Dimensions 9071 Overall height x overall width: 1-3/4” x 3” 9072 Overall height x overall width: 1-5/16” x 2-1/4” Finishes Ives Number B3 B5 BHMA 605 609 Schlage Carded - 1 per card, 5 cards per box. 9110 Decorative Hasp • Made from solid brass. Dimensions E Stops Overall height x overall width: 5/8” x 1-7/8” Finishes Ives Number B3 B5 BHMA 605 609 F Exterior Hardware Schlage Carded - 2 per, 5 cards per box. 9120 Hasp • Made from solid brass. Dimensions G10 Miscellaneous Hardware Overall height x overall width: 3/4” x 2-3/4” Finishes Ives Number B3 B5 BHMA 605 609 Schlage Carded - 1 per card, 5 cards per box. G10 USA 1.877.671.7011 Canada 1.905.403.1800 www.ives.ingersollrand.com Hobby Hardware A Pulls & Plates B Flush Bolts & Coordinators C Latches, Catches & Bolts D Stops E Exterior Hardware F Miscellaneous Hardware G11 Hook with Hasp • Made from solid brass. Hinges & Pivots 9130 Dimensions Overall height x overall width: 3/4” x 2-3/4” Finishes Ives Number B3 BHMA 605 Schlage Carded - 1 per, 5 cards per box. 9210 Support Hinge • Made from steel. • Handed. Specify Left Hand (LH) or Right Hand (RH) Dimensions Extension: approx. 10-3/8” Finishes Ives Number F3 BHMA 632 Schlage Carded - 1 per, 5 cards per box. 9220 Friction Lid Support • Made from steel. • Handed. Specify Left Hand (LH) or Right Hand (RH) Dimensions Extension: approx. 5” Finishes Ives Number F3 BHMA 632 Schlage Carded - 1 per, 5 cards per box. 9311 Decorative Corner • Made from solid brass. Dimensions 9311 Side to corner: 1-3/4” Finishes Ives Number B3 BHMA 605 Schlage Carded - 4 per card, 5 cards per box. G11 USA 1.877.671.7011 Canada 1.905.403.1800 www.ives.ingersollrand.com A B Pulls & Plates Hinges & Pivots Hobby Hardware 9320 Dimensions Each leaf 1/2” x 1-1/8” Finishes Ives Number B3 BHMA 605 Schlage Carded - 4 per, 5 cards per box. C D Flush Bolts & Coordinators 9321 Latches, Catches & Bolts Bracket • Made from solid brass. Bracket • Made from solid brass. Dimensions Each leaf 1/2” x 1-9/16” Finishes Ives Number B3 BHMA 605 Schlage Carded - 4 per, 5 cards per box. 9330 Draw Catch • Made from steel. Dimensions E Stops Overall height: 1-1/2” Overall width: 2-3/4” Finishes Ives Number F3 BHMA 632 F G12 Miscellaneous Hardware Exterior Hardware Schlage Carded - 2 per, 5 cards per box. 9340 Chest Handle • Made from steel. Dimensions Overall height: 1-1/2” Overall width: 3-1/2” Finishes Ives Number F3 BHMA 632 Schlage Carded - 2 per, 5 cards per box. G12 USA 1.877.671.7011 Canada 1.905.403.1800 www.ives.ingersollrand.com Cabinet/Closet Knobs and Pulls Dimensions 1-5/16" High x 3-1/8" Wide x 7/16" Deep Meets ANSI/BHMA A156.9 B22201 and A156.14 D2781. Finishes brass Ives Number B3 B5 B10B B15 B26 B26D BHMA 609 613 619 625 626 218 605 Finger Pull • Ideal for use on sliding doors. • Easy installation. • Made from wrought brass. Dimensions Meets ANSI/BHMA A156.9 B22201 and A156.14 D2781. G13 Flush Pull • Low profile makes this pull ideal for louvered, bi-folding or wardrobe doors. • Extra deep recess and reverse tapered grip provide for ease of pulling and gripping. • Made from wrought brass. Miscellaneous Hardware 673 F 670 Exterior Hardware 669 A716 E A92 Stops A15 D 22 666 A14 Latches, Catches & Bolts BHMA A5 C Finishes aluminum Ives Number A3 Flush Bolts & Coordinators Meets ANSI/BHMA A156.9 B33023 B Dimensions Plate: 1-3/8" High x 5/8" Wide Strike: 13/16" High x 5/8" Wide Pulls & Plates • Ideal for use on the inactive leaf of a pair of cabinet doors. • Surface applied, making installation simple. • Made from cast aluminum. A Elbow Catch Hinges & Pivots 2 Inside Cup Diameter: 3/4" Overall Diameter: 1" Depth: 5/16" Finishes brass Ives Number B3 B5 B10 B10B B15 B26 B26D BHMA 609 612 613 619 625 626 605 G13 USA 1.877.671.7011 Canada 1.905.403.1800 www.ives.ingersollrand.com A Hinges & Pivots B D Meets ANSI/BHMA A156.9 B22201 and A156.14 D2781 Finishes brass Ives Number B3 B4 B5 B10 B10B B15 B15A* B26 B26D BHMA 606 609 612 613 619 620 625 626 222 Dimensions 3-1/8" High x 1-5/8" Wide x 7/16" Deep Finishes brass Ives Number B3 B4 B5 B10 B10B B15 B26 B26D BHMA 606 609 612 613 619 625 626 605 Flush Pull • Low profile makes this pull ideal for louvered, bi-folding or wardrobe doors. Exterior Hardware F 223 G14 Flush Pull • Low profile makes this pull ideal for louvered, bi-folding or wardrobe doors. • Reverse tapered grip provide for ease of pulling. • Made from cast brass. Stops E 605 B716 * only available in Slim-Pak of 25 Meets ANSI/BHMA A156.9 B12201 and A156.14 D1781. Miscellaneous Hardware Flush Pull • Ideal for use on sliding doors. • Built-in prong design eliminates the need for screws or brads and facilitates installation. • Packed with two escutcheon pins for added holding power. • Made from wrought brass. Latches, Catches & Bolts C Dimensions Inside Cup Diameter: 2-1/8" Overall Diameter: 2-7/16" Depth: 7/16" Flush Bolts & Coordinators 221 Pulls & Plates Cabinet/Closet Knobs and Pulls • Made from wrought brass Dimensions 3-9/16" High x 1-5/16" Wide x 1/2" Deep Meets ANSI/BHMA A156.9 B22201 and A156.14 D2781. Finishes brass Ives Number B3 B4 B10 B10B B15 B26 B26D BHMA 606 612 613 619 625 626 605 G14 USA 1.877.671.7011 Canada 1.905.403.1800 www.ives.ingersollrand.com Cabinet/Closet Knobs and Pulls BHMA 605 606 609 612 613 619 625 626 230 Sliding Door Edge Pull • 3/4" width allows installation on narrow as well as standard doors. • Spring automatically returns lever flush with plate. • Made from solid brass. Dimensions 3-7/8" High x 3/4" Wide Finishes Ives Number B3 B4 B5 B10 B10B B15 B26 B26D BHMA 605 606 609 612 613 619 625 626 G15 B26D Miscellaneous Hardware B26 F B15 Exterior Hardware B10B E B10 Stops B5 D B4 Latches, Catches & Bolts B3 C Meets ANSI/BHMA A156.9 B22201 and A156.14 D2781. Finishes Ives Number Flush Bolts & Coordinators Dimensions 3-5/8" High x 1-3/4" Wide x 9/16" Deep B Contoured for ease of pulling. Extra deep well. Deluxe quality. Made from wrought brass. Pulls & Plates • • • • A Flush Pull Hinges & Pivots 227 Meets ANSI/BHMA A156.14 D2801. 42 Pocket Sliding Door Bolt • Exclusive Ives design permits emergency release of bolt from outside the door. • Spring activated design allows feather-touch action. • Brass grommet supplied to cap release hole, protecting the door’s finish. • Made from wrought brass. Dimensions Overall Size Plate: 3-1/16" High x 1-5/32" Wide Strike: 1" High x 3/4" Wide Depth of Mortise: 5/8" Finishes Ives Number B3 B4 B5 B10 B10B B15 B26 B26D BHMA 605 606 609 612 613 619 625 626 G15 USA 1.877.671.7011 Canada 1.905.403.1800 www.ives.ingersollrand.com A Hinges & Pivots Cabinet/Closet Knobs and Pulls 990 Sliding Door Pull • • • • Fits doors 1-3/8" to 1-1/2". Decorative coined edges. Pre-assembled for doors opening left to right. Plates are reversible. Body and strike made from solid brass. B Pulls & Plates Dimensions 1-3/4" D x 2-1/4" H Finishes brass Ives Number B3 B5* B10B B15 B15A* B26 BHMA 609 613 619 620 625 A14 A15 A26D A716 669 670 702 605 B716 C Flush Bolts & Coordinators * only available in Schlage Carded Finishes aluminum Ives Number A3 BHMA D E Stops Latches, Catches & Bolts 991 666 Sliding Door Pull • • • • Fits doors 1-3/8" to 1-1/2". Decorative coined edges. Pre-assembled for doors opening left to right. Plates are reversible. Body, turn knob and strike made from solid brass. Dimensions 1-3/4" D x 2-1/4" H Finishes brass Ives Number B3 B5* B10B B15 B15* B26 BHMA 609 613 619 620 625 A14 A15 A26D A716 669 670 702 605 F Exterior Hardware BHMA G16 B716 * only available in Schlage Carded Finishes aluminum Ives Number A3 Miscellaneous Hardware A5 A5 666 G16 USA 1.877.671.7011 Canada 1.905.403.1800 www.ives.ingersollrand.com Commercial Customer Service: 877.671.7011 Residential Customer Service: 800.766.1966 2007Ingersoll-Rand Ingersoll-Rand Company Limited IV-2001 MS-C62 ©©2011 Company Limited www.ives.ingersollrand.com Rev.01/11 10/07 Rev. Printed Printed in U.S.A.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Create Date : 2011:01:18 14:16:58-06:00 Creator : QuarkXPress(R) 8.12 Modify Date : 2012:02:24 10:03:42-05:00 X Press Private : %%DocumentProcessColors: Cyan Magenta Yellow Black.%%EndComments XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-21:37:19 Creator Tool : QuarkXPress(R) 8.12 Metadata Date : 2012:02:24 10:03:42-05:00 Producer : QuarkXPress(R) 8.12 Format : application/pdf Title : INTRO 2011 Document ID : uuid:0ec58049-85c5-5d4b-b32f-81c85d970dbc Instance ID : uuid:92a034d5-bf9f-4a4b-b0ac-5973ef1f9efc Page Count : 160EXIF Metadata provided by EXIF.tools