Users Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 567411 |
| Application ID | 6Od3bhr1W2vmOc0/1WZtYQ== |
| Document Description | Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 12.56kB (156991 bits) |
| Date Submitted | 2005-08-02 00:00:00 |
| Date Available | 2005-08-02 00:00:00 |
| Creation Date | 2005-07-27 11:43:26 |
| Producing Software | Acrobat Distiller 7.0 (Windows) |
| Document Lastmod | 2005-07-27 11:43:26 |
| Document Title | Microsoft Word - manual.doc |
| Document Creator | PScript5.dll Version 5.2 |
| Document Author: | Administrator |
Operating Instructions RF Repeater System Product No.: JD55-PR JD TECK LTD. Thank you for choosing the JD55-PR RF Repeater System For your safety, we shall recommend to read these instructions carefully before using, operating and adjusting this product. This operating instruction applies only to the JD55-PR RF Repeater System. For PCS 1900 MHz System The JD55-PR RF Repeater System is a bi-directional amplifier designed specially for inbuilding RF Coverage extension ( about 100 ㎡ and more) for cellular services. If you have a coverage problem in your home, office, small shop and restaurant, the JD55-PR RF Repeater System will be a proper solution for your needs. 1. Basic Description of Each Part For PCS 1900 MHz System 2. Function of Each part 1) DONOR ANT. Port for connecting Donor antenna ( Patch Antenna ) 2) SERVICE ANT. Port for connecting Service antenna ( Dipole Antenna ) 3) GAIN CONTROL SWITCH Switch for controlling the system gain to optimize the service environment of Repeater. For using this function, refer to the instructions of LED Alarm and Gain Control Switch as following pages. 4) ALARM LED There are two LED indicators on the unit. One is for displaying the Power Input Status, the other is for operating status. a. Power LED The power indicator, marked “ Power “ acts as power alarm. It monitors the function of the power supply. LED Status Blue LED ON : Normal Status Red LED ON : Power supply failure b. Automatic Shutdown Function If there are some abnormal output powers on the uplink or downlink path, the repeater will be shutdown automatically to avoid any problem. LED Status Blue LED ON : Normal Status Red LED ON : Failure Status If the red indicator lights up, it is designed that the related circuit operates to have the repeater shutdown to protect repeater itself. Despite several corrections, the indicator is still kept red on, it should be secured the isolation more between the donor antenna and service antenna. For PCS 1900 MHz System * Shutdown Algorithm Detection for 10 second Detection for 1 second Detection for 1 second Detection for 1 second Input S/D for 10 seconds S/D for 10 seconds S/D for 30 m inutes S/D com pletely The embedded detector of repeater is designed to detect whether the RF output power of the repeater exceeds a prescribe limit on the downlink or uplink. If it catches some overpowers during 10 seconds and more, the repeater itself shutdown automatically. Meanwhile, the repeater operates as the above algorithm during shutdown. * Shutdown Level Specifications Remarks Downlink +15 ± 2 dBm / Total Red LED ON Uplink +15 ± 2 dBm / 1FA Red LED ON 5) DC POWER SUPPLY Port for connecting exterior power adapter that supplies DC7V power to the repeater.. 6) HOLE for PICTURE FRAME Hole for hanging the picture provided ( Optional ). For PCS 1900 MHz System 3. Instructions for using each device 1) Antenna set Antenna set is comprised of Donor & Service Antenna. To install Antenna set, follow the instructions as bellows. ① Donor Antenna ( Patch Antenna ) ② Assistant Device for installing donor Ant. * If necessary, you can use the fixing bracket differently provided. ③ Donor Antenna cable ④ Service Antenna ( Dipole Antenna ) For PCS 1900 MHz System (★★★ Warning ★★★) When connecting the Donor / Service antenna to the Repeater Body, Do not use too strong power. It is threaten to be connector defected. 2) Gain control switch For system optimizing, you can adjust the system gain through gain control switch according to the LED status and service quality of subscriber’s terminal. In this case, start from step 4 to step1. (★★★ Warning ★★★) Gain being set up to 43dB in the factory. Please adjust it as field condition 3) ALARM LED Can be checked the operating status through LED Lamp in front of Repeater body. If there is any failure status, follow the instruction of the above 2) Gain Control Switch over and over. If RED LED on, the repeater is stopped automatically to avoid any damage. For rebooting the repeater, must be supplied power again. Being still kept failure status despite of , remove the power supply from the repeater. 4) Power Supply Exterior adapter having AC 110 V input supplies DC 7 V power to the repeater to run active circuits. Blue LED On is normal status. For PCS 1900 MHz System 5) Installation on the wall The bracket provided can be used to install repeater on the wall as a below figure. Installation Hole on the wall Repeater Mounting Holder 4. Trouble Shooting If the repeater is not normal status as followings, please remove power supply off to avoid additional damage and contact service center for repairs. ① Overheating status ② Red LED on ( For 35 seconds and more ) ③ Power LED failure (★★★ Caution ★★★) This device shall only be installed and operated by the FCC licensee for the PCS service. For PCS 1900 MHz System 5. Technical Specification Parameters Forward path Reverse path Frequency Range 1930~1990 MHz 1850 ~ 1910 MHz Channel Bandwidth 60 MHz Output Level (Max) +7 dBm / 11FA +10 dBm / 1FA Input Level (Max) -120 ~ -43 dBm -120 ~ -40 dBm Gain 50 dB ± 2 dB Tx/Rx Isolation ≥ 65 dB Noise Figure ≤ 7 dB ( Max Gain ) V.S.W.R ≤ 1.7 : 1 Propagation Delay ≤ 1 us Impedance 50 ohm Control No Control interface Mechanical Specification Dimension 68 (W) x 100 (H) x 37 (D) mm Weight 0.46 kg ( installing bracket included ) Power supply 7V DC / 110V AC Electric power 5.7 W Consumption Operating Temperature / -20 ℃ / 5% ~ +50 ℃ / 95% Relative Humidity -30 ℃ ~ +80 ℃ Storage Temperature Cooling Convection Connector SMA female For PCS 1900 MHz System 6. Package Contains No. Item Descriptions Q/ty Repeater Speed Home Repeater Patch antenna for outdoor Donor Antenna Dipole antenna for indoor Service Antenna Assistant device Screws AC_DC Adapter Assistants Screws Assistant fixing device Picture Assistant for fixing frame Antenna Power supply Fixing device Frame Remarks Optional Optional, Screws included
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No XMP Toolkit : 3.1-701 Producer : Acrobat Distiller 7.0 (Windows) Create Date : 2005:07:27 11:43:26+09:00 Creator Tool : PScript5.dll Version 5.2 Modify Date : 2005:07:27 11:43:26+09:00 Format : application/pdf Creator : Administrator Title : Microsoft Word - manual.doc Document ID : uuid:4cf89d94-472f-4672-a00a-1989caf68ab7 Instance ID : uuid:967831f5-1468-48b6-94b6-43ef335be043 Page Count : 9 Author : AdministratorEXIF Metadata provided by EXIF.tools